Display data in a block

Hi,
I need to display data from different queries on the same block.
I have a cursor whose data is displayed in rows from 1 to 7 (for e.g.) in the same block. I will include a different cursor in the same block whose data is to be displayed starting from row no. 8 in the same block. How do i do that?
dipin

One way would be to actually create two blocks, and place them on the form so they appear as one. It would work except they would each have a separate scroll bar -- unless you removed the scrollbar from the first (since that block could only have 7 rows max), and extend the scrollbar of the first so it appears by both blocks.
If you want to have only one block, it will be problematic to leave the first few rows blank yet start populating in row 8. That would take some coding in a few places to get it working smoothly.

Similar Messages

How to display data in detail block from a table.

Dear members,
i have 2 blocks. 1 is master block and another is detail block with multiple records.
the requirement is when i navigate to the detail block the data from a table is displayed in it. using a where clause depend on the value in an item in the master block.
i wrote the following code and tried in when-new-block-instance, when-new-record-instance, pre-block and post-block
but...
DECLARE
     CURSOR ITEM_CUR IS
     SELECT ITEM_ID, QTY_APPROVED
     FROM IN_REQUEST_FORM_DETAIL
     WHERE RF_MASTER_ID = :IN_MASTER_PO.RF_ID;
BEGIN
     FOR ITEM_REC IN ITEM_CUR LOOP
          :IN_PO_DETAIL.ITEM_ID := ITEM_REC.ITEM_ID;
          :IN_PO_DETAIL.DIS_APPROVED_QTY := ITEM_REC.QTY_APPROVED;
          NEXT_RECORD;
          END LOOP;
EXCEPTION
     WHEN NO_DATA_FOUND THEN
     MESSAGE ('THERE IS NO REQUESTS');
END;

thanks dear simon,
i want to display the data from a table not included in this form. and these two tables are connected via a relation.
i have the following tables.
in_master_po
PO_ID pk
PO_DATE
RF_DETAIL_ID fk (in_request_form_detail)
in_po_detail
DETAIL_PO_ID pk
ITEM_ID fk
PO_ID fk (in_master_po)
QTY
the above 2 tables are datablocks connected via relation
the following is the from which i want to bring the data to display
in_request_form_detail
RF_DETAIL_ID pk
ITEM_ID fk (items)
QTY_REQ
i tried my code on the sample tables with scott/tiger there it works good.
thanks
Muhammad Nadeem

Filter Display Data using Form Personalization

Hi All,
I have 2 blocks, Query and Detail block.
Based on search criteria from query block the details are displayed in detail block.
Now i want to filter display data in Detail block by adding org_id condition through form personalization.
I would like to know if its possible by form personalization.
Thanks

not sure any auto feature available but u can set the DEFAULT_WHERE property of the Block using SET_BLOCK_PROPERTY and execute query after it
search DEFAULT_WHERE in this forum for examples
Baig,
[My Oracle Blog|http://baigsorcl.blogspot.com/]

Inserting/updating data in control block based on view

Hi!
I`ve created a block based on a view to display data.
I want this block to be insertable and updateable, that is I will use a on-insert/update trigger to call an insert/update procedure located in the database.
When trying to change/insert a value in the block, the error message "Error: Can not insert into or update data in a view" pops up. I`ve tried to get rid of this error, without success.
How can I make a data block based on a view insertable and updateable?
My guess is that this have something to do with locking the records(there is no rowid in the view)... but I'm not sure.
Pls advise!!

Morten
As well as on-update, on-insert, on-delete triggers you also need an on-lock,
(even though it might just contain null;) otherwise the form will try to lock the view and fail.
Actually your terminology is wrong, the block being based on a table or view is not a control block. A control block is not based on anything and has no default functionality for communicating with the database. If it was a control block, the on- triggers would not fire.

How to validate the field when i am populating the data cursor to block

Hi,
I am populating data cursor to multi record block.
Block contain 5 items. I am populating data cursor to block for 4 items. User will enter one item value that is quantity field.
If user enter negative values and decimal points in quantity filed i need to display message to user item level.
Please do the needful how to do it.

902434 wrote:
Hi,
I am populating data cursor to multi record block.
Block contain 5 items. I am populating data cursor to block for 4 items. User will enter one item value that is quantity field.
If user enter negative values and decimal points in quantity filed i need to display message to user item level.
Please do the needful how to do it.If you want to validate at entry level then use When-Validate-Item trigger and check the input and show message. Like
If :quentity <0 then
message('do not enter negative value');
message('do not enter negative value');
raise form_trigger_failure;
end if;Why u open same thread again ? not closing one.. check this one
</a>
How to validate the field when i am populating the data cursor to block
Hopes this helps
If someone's response is helpful or correct, please mark it accordingly.

I have Problem in fetching data from CONTROL BLOCK

Sir,
I am facing problem in fetching data from control block.
Asif.

is your control-block a filter-block for the detail-block?
Do you want to see only the detail-data of the user-id you have displayed in the master?

Form is not displaying data

I am new to forms.
I developed a form which has two blocks.
block1 uses the header table and retrieves the header information.
block2 uses the detail table and retieves the detail information. I joined both of the block using relations. (Batch_Id is common to both the tables)
I put below condition in WHEN-NEW-FORM-INSTANCE (in form level i.e module)
go_block('block1);
execute_query;
go_block('block2');
execute_query;
I dont know what I missed..My form is not displaying any data(data exist in the tables). I really appreciate your help in this regard.
Thanks in Advance!!

Hi,
Since you :
1) set the master block to query mode as soon as the form opens
2) set the relation correctly,
you need not the two go_block... and execute_query commands , just the first one for the master block.
As regards the issue that there are no records fetched/displayed in the master block ,
1) is there any error message...????
2) is there any where clause set at master' s block...(where clause property)???
Have you tried to insert a record on master block and two/three on detail and queried them afterwards using your form....????
Greetings,
Sim

Multiprovider display data issue

Hello,
I'm using BI7.0 and created Multiprovider using Custom DSO and Infocube1.
the problem is, when i use display data through multiprovider, I'm not able to see data from DSO .
I have considered all common fields from DSO and Cube and assigned in multiprovider.
basically I'm selecting all IO and Keyfigures from Infocube1 and few IO from DSO
some reason I am not able to see data from DSO when i view data through multi provider.
Please help me to view data from both cube and dso through multi provider.
Thanks
Ganga

Hi Ganga,
Please check whether there is any restrictions for the field 0PROVIDER. There may be restriction to get the data only from cube.
If there is no any restrictions then here may be your problem.
You need to maintain atleast one key figure in both targets.
Since there is no any key fig coming from DSO
please create a dummy key fig and try to check once again.
please go through the link.
Re: MULTIPROVIDER NOT GETTING DATA
hope this helps u.
Thanks,
Sai Chand

Need Suggestion in displaying data in ALV.

Hi All Experts,
I have a scepic scenario for which I need your inputs. I am preparing a report which will display data foe entries made in time sheet. The entries in time sheet can be made for anything like a change request on an incident etc. It will have various output fields
And also dates for which entries are made. So it can have date from 1 to 31. This all is
to be displayed in ALV. Now the report can be displayed in two Summarised ways.
One summary can be for a user and another for the object type(incident, change request).
Now if the user wants to see this report for a period more than a month then I have to summarise it against a month too. So am not sure how to handle this. Which type of ALV function module to be used to display this?
Regards,
Saket

hello,
I would suggest to go for GRID display - for that you can use either function module or class.
Tips:
If it also need to be summarised by month then add an extra field in fieldcatalog as monthid / monthname.
also it's better to have an extra field for object tyoe (Incident/ change)...
Thanks.

Display data in JTable

I am trying to display data from database into the JTable swing component. I can see the table and the heading coming from the vector. I cannot see why the data from the databse table is not loaded on to the Jtable. I just get a table with 6 rows blank.
import java.awt.event.*;
import java.awt.*;
import javax.swing.*;
import java.io.*;
import java.sql.*;
import java.util.*;
public class dataTable extends JApplet
String dbdriver="jdbc:oracle:thin:@ds1.ctateu.edu:1521:wpac";
String dbuser="system";
String dbpass="pass";
Container c;
JScrollPane jsp;
JTable table;
int v,h;
Connection connection;
Statement stmt;
ResultSet rs;
String param_start,param_end, param_disp_start, param_disp_end,param_shortdesc, param_longdesc;
public void init()
c= getContentPane();
c.setLayout (new BorderLayout());
v=ScrollPaneConstants.VERTICAL_SCROLLBAR_ALWAYS;
h=ScrollPaneConstants.HORIZONTAL_SCROLLBAR_ALWAYS;
Vector heading = new Vector();
heading.addElement("Event Start Date");
heading.addElement("Event End Date");
heading.addElement("Display Start Date");
heading.addElement("Display End Date");
heading.addElement("Short Description");
heading.addElement("Long Description");
Vector data = new Vector();
try
Class.forName("oracle.jdbc.driver.OracleDriver");
connection=DriverManager.getConnection(dbdriver,dbuser,dbpass);
stmt=connection.createStatement();
rs= stmt.executeQuery("select * from univevents");
while(rs.next())
param_start = rs.getString("start_date");
param_end = rs.getString("end_date");
param_disp_start = rs.getString("display_start");
param_disp_end =rs.getString("display_end");
param_shortdesc = rs.getString("short_desc");
param_longdesc = rs.getString("long_desc");
catch (Exception e)
//JOptionPane.showMessageDialogue("Exception: "+e.getMessage());
data.addElement(param_start);
data.addElement(param_end);
data.addElement(param_disp_start);
data.addElement(param_disp_end);
data.addElement(param_shortdesc);
data.addElement(param_longdesc);
table = new JTable(data, heading);
jsp = new JScrollPane(table,v,h);
//Add scrollpane to container
c.add("Center",jsp);
}//init
}//JApplet

Your data vector should be a Vector of Vectors.
I think you need to change your loop to look something like this:
while(rs.next())
    Vector row = new Vector();
    row.addElement( rs.getString("start_date") );
    row.addElement( rs.getString("end_date") );
    row.addElement( rs.getString("display_start") );
    row.addElement( rs.getString("display_end") );
    row.addElement( rs.getString("short_desc") );
    row.addElement( rs.getString("long_desc") );
    data.addElement( row );
} Then remove your data.addElement() statements found outside the loop.

Displaying data in a tree from database table

Hi,
I want to display data from a database table (mara-matnr) in a tree structure. I went through the coding of SBSPEXT_HTMLB. There static data was taken in to wa_tab. But there I want to bring data from a database table into wa_tab. For this I created an internal table without headerline by taking a work area, now how can I move data from this work area to wa_tab record by record.
I hope some one might have worked on this. Plz help me....
Thanks in advance,
Ravindra.

Hi,
take a look at this <a href="/people/tomas.altman/blog/2004/12/13/sdn-blog-how-to-do-internal-tables-in-bsp which explains how internal tables work in ABAP OO.
Furthermore I think you want to do this:
insert <yourWorkarea> into table wa_tab.
A complete mara example would be:
data tab_mara type table of mara.
data wa_mara type mara.
select * from mara into table tab_mara.
*or you can use:
select * from mara into wa_mara.
insert wa_mara into table tab_mara.
endselect.
regards
Thomas

Can't display data that exist in cupe

Hi All,
I get a problem which is thar even i entered data in the cube i cant display with charecteristics. When i go to bw and display data if i say select charecteristics i can see any data but if i dont select charecteristics i can display data. Also when i enter data and sen data it say succesful but i loose data on view. Have anyone get any problem like that thanks for your interest.
Kasim

Hi,
The code you sent appears to be the Audio Talkthrough example with several modifications. Here's the first thing I noticed that appears to be incorrect: You're using the BF AD1871 Wait on Data Ready Flag VI to fill the sub-buffer, then you go into a loop and get the contents of that buffer 256 times. You should be filling the buffer each time before you get the buffer instead of only filling it once. You also aren't resetting the data ready flag by using the BF AD1871 Clear Data Ready Flag VI.
Message Edited by Michael P on 07-28-2006 09:55 AM
Michael P
National Instruments

Not able to display data in different columns using Unicode encoding

Hi,
Iam using Unicode encoding in my Java appln to support Japanese characters while downloading CSV report. But using the Unicode encoding displays all data in the first column of Excel sheet.
Please let me know how to display data in different columns using Unicode encoding in Excel sheet.

Hi Venkat,
After extracting data into DSO check the request whether active or not.
Check data in DSO in contents.
If is there any restrictions on info providers in Queries.
Let us know status clearly.......
Reg
Pra

Not able to display data in separate columns using Unicode encoding

Hi,
Iam using Unicode encoding in my Java appln to support Japanese characters while downloading CSV report. But using the Unicode encoding displays all data in the first column of Excel sheet.
Please let me know how to display data in different columns using Unicode encoding in Excel sheet.
This is an urgent need. Please help me out.

Hi,
I have no problem with item :P15_EV_LCL this is having a value my probem here is i am using java script to display the value in different color based on the condtion case
eg:
select
case
TRUNC((
( (NVL(Z."AEWP",0) - NVL(Z."BEWP_Final",0) ) / DECODE(Z."BEWP_Final",0,NULL,Z."BEWP_Final") ) * 100
),2)
= :P15_EV_LCL
then
span style="background-color:lightgreen"
|| TRUNC((
( (NVL(Z."AEWP",0) - NVL(Z."BEWP_Final",0) ) / DECODE(Z."BEWP_Final",0,NULL,Z."BEWP_Final") ) * 100
),2) || '%' || /span
else
span style="background-color:yellow"
|| TRUNC(
( (NVL(Z."AEWP",0) - NVL(Z."BEWP_Final",0) ) / DECODE(Z."BEWP_Final",0,NULL,Z."BEWP_Final") ) * 100
),2) || '%' || /span
end "Effort"
from actuals Z
If i dont use this <Span style="Background-color:color"> i am able to generate data in excel sheet if i use this color coding i am not able to get data in spread sheet.
Please suggest
Thanks
Sudhir
Edited by: Sudhir_N on Mar 23, 2009 10:00 PM

Displaying data in one row for for 2 tables without relaiton

I Have 2 tables without any relation and there is a common field and i want to display data like below
table refdet
1)
refdt----------refbr----refamt----refcat
10-aug-09---10-----34234-----101a
10-aug-009--11----23245-----102a
1-AUG-09----10----455.98----104A
19-aug-09-12-----10000-------103B
2) brdet
trdt---------brn-----brtot-----------brcat
11-aug09--10-----454000-------A
09-aug-09-12-----550000-------B
30-sep-09--10-----430000------A
09-aug-09-11-----550000-------B
i want to display data for each branch refdet.refbr = brdet.brn
refdet
Br10
refdt----------refbr----refamt----refcat-----trdt---------brn-----brtot-----------brcat
10-aug-09---10-----34234-----101a-------11-aug09--10-----454000-------A
1-AUG-09----10----455.98----104A------30-sep-09--10-----430000------A
Br 11
10-aug-009--11----23245-----102a -------09-aug-09-11-----550000-------B
Br12
19-aug-09-12-----10000-------103B------09-aug-09----12-----550000-------B
i tried the following query but its not working
select distinct null as refdt,null as refbr,null as refamt,null as refcat,b.trdt,b.brn,b.brtot,b.brcat
from brdet a,refdet b
where a.refbr (+) = b.brn
union all
select distinct a.refdt,a.refbr,a.refamt,a.refcat,null as trdt,null as brn,null as brtot,null as brcat
from brdet a,refdet b
where a.refbr = b.brn (+)
its not giving the records on each row for both side its creating separte rows for each records in both table.
rgds
jytohi
-

Hi jytohi,
Please lean back for a moment and study your question. Ask yourself, is this a reasonable way to ask a question?
Jopefully you'll reach the answer, "No it isn't, I need to.."
1. Turn these
1)
refdt----------refbr----refamt----refcat
2) brdet
trdt---------brn-----brtot-----------brcatinto CREATE TABLE statements.
2. Turn these
10-aug-09---10-----34234-----101a
10-aug-009--11----23245-----102a
1-AUG-09----10----455.98----104A
19-aug-09-12-----10000-------103B
11-aug09--10-----454000-------A
09-aug-09-12-----550000-------B
30-sep-09--10-----430000------A
09-aug-09-11-----550000-------Binto INSERT INTO statements
3. Turn this
refdet
Br10
refdt----------refbr----refamt----refcat-----trdt---------brn-----brtot-----------brcat
10-aug-09---10-----34234-----101a-------11-aug09--10-----454000-------A
1-AUG-09----10----455.98----104A------30-sep-09--10-----430000------A
Br 11
10-aug-009--11----23245-----102a -------09-aug-09-11-----550000-------B
Br12
19-aug-09-12-----10000-------103B------09-aug-09----12-----550000-------Binto properly formatted expected output, along with a reasonable explanation of why
4. Turn this
select distinct null as refdt,null as refbr,null as refamt,null as refcat,b.trdt,b.brn,b.brtot,b.brcat
from brdet a,refdet b
where a.refbr (+) = b.brn
union all
select distinct a.refdt,a.refbr,a.refamt,a.refcat,null as trdt,null as brn,null as brtot,null as brcat
from brdet a,refdet b
where a.refbr = b.brn (+)into a properly formatted query
And last, put everything in into curly brackets {noformat}{noformat} to preserve formatting and blank space.
Best regards
Peter

Display data in a block

Similar Messages

Maybe you are looking for