Display document-Session terminated automatically
Hi Experts,
When I am trying to display,change,attributes or download the document, normally a pop up screen used to come earlier and the document used to get displayed.But now I am facing a problem when i click on any of the above functionalities i.e., display,change,download now session is terminating as well as I am getting terminated automatically from other SAP systems also with out promting any message.
Can any one help me on this? Have any one faced this kind of situation.
Thanks
Ratan
Hi Ratan,
This seems to be a known bug in the kernel, in the C-function DiagoTabFocusColumn is in the kernel patch 117, so it occurs in the kernel 701 patch 117.
If this is your case, then to eliminate the issue please install the latest kernel(disp+work) patch.
You can find latest kernel at:
http://service.sap.com/patches
Then apply the patch as mentioned in note:
19466 Downloading SAP kernel patches
in section: 'Copying and installing a patch'
This should fix the issue.
kind regards, Fabricius
Similar Messages
-
Error :Display document : Update was terminated.While displaying the PO
Hi All,
I am creating a PO with respect to contract in SAP 4.6C system using ME21.PO is getting created successfully.But when I want to display the same in ME23 it giving me a message 'Display document : Update was terminated'.( an express message is getting generated to view in SBWP transaction code ).
I went through some of SDN forums and checked the tcode SM13 to resolve the issue .I found that there is no ABAP dump got generated for the same .
Please help me to resolve the issue ..
Regards,
Praveen GB.Hi Lakshman.
I did that, systesm is showing below error :
1 ME_CREATE_DOCUMENT V1 NORMAL Err
when click on that ,I got one more window with an option to check ABAP dump,But there is no ABAP dump exists for the same.
I cheked in ST22 also there is no DUMP available for the above issue.
Please let me know how to crack this issue.
Regards.,
Praveen GB -
Work process re-started , session terminated
Hi Gurus,
While i creating a purchase order (me21n) , the process runs for a while and then i am getting a SAP GUI message "Work process re - started , session terminated" and the session is closed.Can anyone give me the cause of the problem and solution for the same.
Developers Trace File Entry:
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B B Fri Aug 31 16:09:36 2007
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\I04\SYS\exe\run\dbmssslib.dll' ...
B Library 'C:\usr\sap\I04\SYS\exe\run\dbmssslib.dll' loaded
B Version of 'C:\usr\sap\I04\SYS\exe\run\dbmssslib.dll' is "640.00", patchlevel (0.26)
B New connection 0 created
M systemid 560 (PC with Windows NT)
M relno 6400
M patchlevel 0
M patchno 25
M intno 20020600
M make: multithreaded, ASCII
M pid 1680
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 1680) [dpxxdisp.c 1160]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: JAVA is not active
M DpShMCreate: sizeof(wp_adm) 7456 (828)
M DpShMCreate: sizeof(tm_adm) 2219848 (11044)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpShMCreate: sizeof(comm_adm) 192000 (384)
M DpShMCreate: sizeof(vmc_adm) 0 (320)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 05230040, size: 2506248)
M DpShMCreate: allocated sys_adm at 05230040
M DpShMCreate: allocated wp_adm at 052317A8
M DpShMCreate: allocated tm_adm_list at 052334C8
M DpShMCreate: allocated tm_adm at 052334F0
M DpShMCreate: allocated wp_ca_adm at 05451438
M DpShMCreate: allocated appc_ca_adm at 05455A88
M DpShMCreate: allocated comm_adm_list at 054571F8
M DpShMCreate: allocated comm_adm at 05457210
M DpShMCreate: allocated vmc_adm_list at 05486010
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 05486038
M DpShMCreate: allocated wall_adm at 05486040
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
M <EsNT> Memory Reset enabled as NT default
X ES initialized.
M M Fri Aug 31 16:09:37 2007
M calling db_connect ...
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'C:\usr\sap\I04\SYS\exe\run\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 26
C patchcomment MSSQL: GetNextMsst1 error (754819)
C np:(local) connection used on IDES
C Using Provider SQLNCLI
C Provider Release:9.00.1399.06
C Using Provider SQLNCLI
C C Fri Aug 31 16:09:41 2007
C Cache sizes: header 52 bytes, 20000 names (26720000 bytes), 1000 dynamic statements (5432000 bytes), total 32152052 bytes
C Using shared procedure name cache IDES_I04I04_I04_MEM initialized by another process.
C Connected to db server : [IDES] server_used : [np:(local)], dbname: I04, dbuser: i04
C pn_id:IDES_I04I04_I04
B Connection 0 opened
B Wp Hdl ConName ConId ConState TX PRM RCT MAX OPT Date Time DBHost B 000 000 R/3 000000000 ACTIVE NO YES NO 255 255 20070831 160937 IDES C The IRow interface is supported by this OLEDB provider
M db_connect o.k.
I I Fri Aug 31 16:09:53 2007
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 098E0040, size: 4400128)
M SHM_ROLL_AREA (addr: 68200040, size: 160432128)
M SHM_PAGING_AREA (addr: 09D20040, size: 72351744)
M SHM_ROLL_ADM (addr: 0E230040, size: 1602056)
M SHM_PAGING_ADM (addr: 0E3C0040, size: 525344)
M ThCreateNoBuffer allocated 320144 bytes for 1000 entries at 0E450040
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 7424 bytes (50 server) at 0E4A0040
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 9
B dbtbxbuf: Buffer TABL (addr: 134C00C8, size: 30000128, end: 1515C4C8)
B dbtbxbuf: Buffer TABLP (addr: 0F3000C8, size: 10240000, end: 0FCC40C8)
B dbexpbuf: Buffer EIBUF (addr: 151600D0, size: 4194304, end: 155600D0)
B dbexpbuf: Buffer ESM (addr: 155700D0, size: 4194304, end: 159700D0)
B dbexpbuf: Buffer CUA (addr: 0FCE00D0, size: 3072000, end: 0FFCE0D0)
B dbexpbuf: Buffer OTR (addr: 159800D0, size: 4194304, end: 15D800D0)
M rdisp/reinitialize_code_page -> 0
M icm/accept_remote_trace_level -> 0
C C Fri Aug 31 16:09:54 2007
C Using Provider SQLNCLI
C The IRow interface is supported by this OLEDB provider
S S Fri Aug 31 16:09:55 2007
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 15EFFBD0
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 1DF30098
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 1DF302C8
S using messages for server info
S size of spec char cache entry: 165020 bytes (timeout 100 sec)
S size of open spool request entry: 1152 bytes
S immediate print option for implicitely closed spool requests is disabled
A A -PXA--
A PXA INITIALIZATION
A PXA: Fragment Size too small: 195 MB, reducing # of fragments
A System page size: 4kb, admin_size: 11476kb.
A Attached to PXA (address 24550040, size 400000K)
A abap/pxa = shared protect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A A A Fri Aug 31 16:09:56 2007
A ABAP ShmAdm attached (addr=56AF9000 leng=20955136 end=57EF5000)
A >> Shm MMADM area (addr=56E610E0 leng=134752 end=56E81F40)
A >> Shm MMDAT area (addr=56E82000 leng=17248256 end=57EF5000)
A RFC Destination> destination ides_I04_00 host ides system I04 systnr 0 (ides_I04_00)
A RFC Options> H=ides,S=00
A RFC FRFC> fallback activ but this is not a central instance.
A A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 1
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
A Hotpackage version: 38
M ThrCreateShObjects allocated 9394 bytes at 0FFD0040
N SsfSapSecin: putenv(SECUDIR=C:\usr\sap\I04\DVEBMGS00\sec): ok
N N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is C:\usr\sap\I04\SYS\exe\run\sapsecu.dll .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...sucessfully completed.
N =================================================
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
W =================================================
W === ipl_Init() called
W ITSP Running against db release 620!
W ITSP Disable Kernel Web GUI functionality
W === ipl_Init() returns 2, ITSPE_DISABLED: Service is disabled (sapparam)
W =================================================
B B Fri Aug 31 16:10:05 2007
B dbtran INFO (init_connection '<DEFAULT>' [MSSQL:640.00]):
B max_blocking_factor = 50, max_in_blocking_factor = 255,
B min_blocking_factor = 5, min_in_blocking_factor = 10,
B prefer_union_all = 1, prefer_union_for_select_all = 0,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 0,
B convert AVG = 1, alias table FUPD = 0,
B escape_as_literal = 0, opt GE LE to BETWEEN = 0,
B select * =0x00, character encoding =SBCS / []:X,
B use_hints = abap->1, dbif->0x1, upto->0, rule_in->0,
B rule_fae->0, concat_fae->0, concat_fae_or->0
I I Fri Aug 31 16:10:10 2007
I MPI<c>9#3 Peak buffer usage: 5 (@ 64 KB)
S server @>SSRV:ides_I04_00@< appears or changes (state 1)
S server @>SSRV:ides_I04_00@< appears or changes (state 1)
S server @>SSRV:ides_I04_01@< appears or changes (state 1)
E E Fri Aug 31 16:10:11 2007
E Replication is disabled
N N Fri Aug 31 16:10:28 2007
N login/password_change_for_SSO : 1 -> 1
B B Fri Aug 31 16:10:38 2007
B table logging switched off for all clients
B B Fri Aug 31 16:10:41 2007
B dbmyclu : info : my major identification is 3232245831, minor one 0.
B dbmyclu : info : Time Reference is 1.12.2001 00:00:00h GMT.
B dbmyclu : info : my uuid is 96AAC2654435DC46AFA4C31629BE366F.
B dbmyclu : info : current optimistic cluster level: 3
B dbmyclu : info : pessimistic reads set to 2.
S S Fri Aug 31 16:15:55 2007
S found spool memory service RSPO-ACTIONS at 1DF34B50
M M Fri Aug 31 16:20:14 2007
M call semaphore clean-up function ...
M ***LOG Q0E=> DpSigGenHandler, Exception (c0000005) [dpnttool.c 462]
M -
C-STACK -
SAP (R) - R/3(TM) Callstack, Version 1.0
Copyright (C) SAP AG. All rights reserved.
Application exception occurred:
Exception : c0000005 (Access Violation)
App : disp+work.EXE (pid=1680)
When : 8/31/2007 16:20:14.837
Threads : 2
Computer Name : IDES
User Name : SAPServiceI04
Number of Processors: 2
Processor Type: x86 Family 15 Model 6 Stepping 4
Windows Version : 5.2 Current Build: 3790
State Dump for Thread Id 9cc
eax=00000000 ebx=00000000 ecx=00000014 edx=00000000 esi=003860ec edi=003860c0
eip=7c82ed54 esp=0300daa8 ebp=0300dab8 iopl=0 nv up ei pl nz ac pe nc
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00000212
function : MmxFree2
00f35dde 2b0568e59701 sub eax,[MmxUheaderSz (0197e568)] ds:0197e568=00000010
00f35de4 50 push eax
00f35de5 68dd000000 push 0xdd
00f35dea ffb4246c010000 push dword ptr [esp+0x16c] ss:0300dc14=7c82f9dd
00f35df1 e890ac1200 call memset (01060a86)
00f35df6 83c40c add esp,0xc
00f35df9 8b4308 mov eax,[ebx+0x8] ds:0300d006=2bf38b08
00f35dfc 8bf3 mov esi,ebx
00f35dfe 2b730c sub esi,[ebx+0xc] ds:0300d006=2444890c
00f35e01 89442418 mov [esp+0x18],eax ss:0601aaaf=00000000
FAULT-> 00f35e05 f60601 test byte ptr [esi],0x1 ds:003860ec=08
00f35e08 7513 jnz MmxFree2+0x4cf (00f35e1d)
00f35e0a 8bce mov ecx,esi
00f35e0c e814a7ffff call MmxIBlockRemove (00f30525)
00f35e11 8b4308 mov eax,[ebx+0x8] ds:0300d006=08460108
00f35e14 014608 add [esi+0x8],eax ds:033930f2=00000000
00f35e17 89742414 mov [esp+0x14],esi ss:0601aaaf=00000000
00f35e1b 8bde mov ebx,esi
00f35e1d 8b7308 mov esi,[ebx+0x8] ds:0300d006=f6f30308
00f35e20 03f3 add esi,ebx
00f35e22 f60601 test byte ptr [esi],0x1 ds:003860ec=08
00f35e25 750d jnz MmxFree2+0x4e6 (00f35e34)
--> Stack Back Trace <--
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
0300e648 00746014 3cc00548 3d07d010 06751220 00000000 disp+work!MmxFree2 [mmxx.c (2440)]
0300e668 006450a7 00000000 00000001 3cc88e78 3cc485e8 disp+work!ab_sqlsclose [absapsql.c (8104)]
0300e690 006466c6 00000013 00750af1 00000000 000000cd disp+work!ab_popbst [abstacks.c (4763)]
0300e698 00750af1 00000000 000000cd 00000000 01c720fa disp+work!ab_poprsql [abstacks.c (1167)]
0300e6cc 006e0f51 00000000 3d170778 00000000 00f00105 disp+work!ab_jsqls [absapsql.c (1306)]
0300e770 00766be4 3d1715b3 3d170778 00000000 01afb3a4 disp+work!ab_extri [abextri.c (431)]
0300e784 007ebf1c 00000000 7c36a42b 000004b6 00571b1a disp+work!ab_xevent [abrunt1.c (261)]
0300e794 00571b1a 3d171080 0000002e 3d170778 3d17139a disp+work!ab_dstep [abdynpro.c (460)]
0300e7bc 005740de 3d170778 3d170778 7c36a42b 00000000 disp+work!dynpmcal [dymainstp.c (2312)]
0300e7d4 00573680 3d17139a 3d170778 00000003 0300fdcc disp+work!dynppai0 [dymainstp.c (1043)]
0300e7f0 00549340 3d170778 00000002 00000001 00000000 disp+work!dynprctl [dymainstp.c (350)]
0300fdcc 004747f4 00000002 0300fe74 00000001 00497626 disp+work!dynpen00 [dymain.c (1375)]
0300fddc 00497626 00000002 00000000 003860a8 00000002 disp+work!Thdynpen00 [thxxhead.c (4353)]
0300feec 004979e0 00000001 7ffd4000 00000000 00000000 disp+work!TskhLoop [thxxhead.c (4117)]
0300ff04 00421d07 00000000 00000000 0300ff60 00401059 disp+work!tskhstart [thxxhead.c (1038)]
0300ff14 00401059 00000003 003860a8 00000001 00000000 disp+work!DpMain [dpxxdisp.c (1009)]
0300ff60 01060bcf 00000003 003860a8 003828f8 0152d000 disp+work!main [thxxanf.c (58)]
0300ffc0 77e523e5 00000000 00000000 7ffd4000 80a56be3 disp+work!mainCRTStartup [crtexe.c (398)]
0300fff0 00000000 01060a8c 00000000 00905a4d 00000003 kernel32!IsProcessorFeaturePresent
State Dump for Thread Id d2c
eax=0000005e ebx=00000103 ecx=00000010 edx=000719bb esi=00000000 edi=00000000
eip=7c82ed54 esp=04a1feb0 ebp=04a1fef4 iopl=0 nv up ei pl zr na po nc
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00000246
function : KiFastSystemCallRet
7c82ed54 c3 ret
7c82ed55 8da42400000000 lea esp,[esp] ss:04a1feb0=7c821514
7c82ed5c 8d642400 lea esp,[esp] ss:07a2ceb7=????????
--> Stack Back Trace <--
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
04a1fef4 00fc37ec 000006ac 00000000 00000000 0038cd48 ntdll!KiFastSystemCallRet
04a1ff84 7c349565 00000000 00000000 00000000 0038cbd0 disp+work!SigIMsgFunc [signt.c (559)]
04a1ffb8 77e6608b 0038cbd0 00000000 00000000 0038cbd0 MSVCR71!endthreadex
04a1ffec 00000000 7c3494f6 0038cbd0 00000000 00000000 kernel32!GetModuleFileNameA
M -
M M Fri Aug 31 16:20:16 2007
M call clean-up function ...
M in_ThErrHandle: 1
M ThSigHandler: signal (step 4, th_errno 11, action 4)
M M Info for wp 0
M M stat = 4
M reqtype = 1
M act_reqtype = 1
M rq_info = 0
M tid = 9
M mode = 0
M len = 787
M rq_id = 423
M rq_source = 1
M last_tid = 9
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M M Modeinfo for User T9/M0
M M tm state = 2
M uid = 13
M term type = 0x4
M display = 0x8
M cpic_no = 0
M cpic_idx = -1
M usr = >ABAP1 <
M terminal = >DDDC393 <
M client = >120<
M conversation_ID = > <
M appc_tm_conv_idx = -1
M imode = 1
M mode state = 0x12
M task_type = ZTTADIA
M th_errno = 11
M rollout_reason = 1
M last_rollout_level = 7
M async_receives = 0
M cpic_receive = 0
M em handle = 0
M roll state = 4
M abap state = 4
M em state = 3
M eg state = 1
M spa state = 3
M enq state = 0
M next hook = T-1/U-1/M255
M master hook = T-1/U-1/M255
M slave hook = T-1/U-1/M255
M debug_tid = 255
M debug_mode = 0
M mode type = 0x1
M debug = 0
M tcode = >ME21N <
M client conversation_ID = > <
M server conversation_ID = > <
M lock = 0
M max enq infos = 9
M act enq infos = 2
M em_hyper_hdl = 57F03BD8
M plugin_info = NULL
M act_plugin_hdl = -1
M act_plugin_no = 0
M max_plugin_no = 0
M M Adresse Offset Data from input buffer
M -
M 054A7D70 000000 00000000 00000000 01502700 00000000 |.........P'.....|
M 054A7D80 000016 00000000 0000009f 74100623 00170000 |........t..#....|
M 054A7D90 000032 04880131 31363000 77696e64 6f77732d |...1160.windows-|
M 054A7DA0 000048 31323532 00100409 00033731 3010041d |1252......710...|
M 054A7DB0 000064 00013010 040f0004 000012ad 10041900 |..0.............|
M 054A7DC0 000080 02000010 05010016 000d0000 000d002b |...............+|
M 054A7DD0 000096 a1001fa2 00000000 00000000 0000100c |................|
M 054A7DE0 000112 08001000 00029f00 00047400 00029f00 |..........t.....|
M 054A7DF0 000128 00047410 0a010009 00000000 00000000 |..t.............|
M 054A7E00 000144 00100a03 00090100 00000000 78001f10 |............x...|
M 054A7E10 000160 0a030009 03000900 00007800 0a100a03 |..........x.....|
M 054A7E20 000176 00090200 00000300 75000a10 0a030009 |........u.......|
M 054A7E30 000192 01000000 00007500 0a100a05 00090100 |......u.........|
M 054A7E40 000208 00000000 75000910 090e00c8 00c80000 |....u...........|
M 054A7E50 000224 00000075 00090000 23000700 0200000c |...u....#.......|
M 054A7E60 000240 01000000 00002300 82003c00 00000003 |......#...<.....|
M 054A7E70 000256 00070000 00070000 00000000 00000000 |................|
M 054A7E80 000272 00000000 00000000 00020005 00020002 |................|
M 054A7E90 000288 000c0014 00110003 0001000a 000e0005 |................|
M 054A7EA0 000304 00060003 000a000f 000c0008 000a000c |................|
M 054A7EB0 000320 000c0008 00030003 0002000a 0005000a |................|
M 054A7EC0 000336 0005000a 0005000a 00050005 00011100 |................|
M 054A7ED0 000352 11001100 11001100 11001100 11001100 |................|
M 054A7EE0 000368 11001100 11001100 11001100 11001100 |................|
M 054A7EF0 000384 11001100 11001100 11001100 11001100 |................|
M 054A7F00 000400 11001100 11001100 11001100 11001100 |................|
M 054A7F10 000416 11001100 100c0200 18000000 07000000 |................|
M 054A7F20 000432 23000000 07000000 00000000 00000000 |#...............|
M 054A7F30 000448 00100909 00180001 00077920 20202020 |..........y |
M 054A7F40 000464 20202020 20202020 31303030 0000100a | 1000....|
M 054A7F50 000480 01000900 00000000 00000000 100a0300 |................|
M 054A7F60 000496 09010000 00000078 001f100a 03000902 |.......x........|
M -
M M *****************************************************************************
M *
M * LOCATION SAP-Server ides_I04_00 on host ides (wp 0)
M * ERROR ThSigHandler: signal
M *
M * TIME Fri Aug 31 16:20:16 2007
M * RELEASE 640
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 11
M * MODULE thxxhead.c
M * LINE 9555
M * COUNTER 3
M *
M *****************************************************************************
M M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
M TrThHookFunc: called for WP dump
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M ThrSaveSPAFields: save spa fields
M Entering ThSetStatError
C SQLBREAK: DBSL_CMD_SQLBREAK: CbOnCancel was set. rc: 1 BREAK_REQUESTED
M ThIErrHandle: don't try rollback again
M ThIErrHandle: call ThrCoreInfo
M ThDelEnqInfo: del enq_own >20070831161118747000000000ides............................</1
M ThDelEnqInfo: act enq info: 1
M ThDelEnqInfo: del enq_own >20070831161118747000010000ides............................</2
M ThDelEnqInfo: act enq info: 0
A TH VERBOSE LEVEL FULL
C Fri Aug 31 16:20:17 2007
C SQLBREAK: BREAK_REQUESTED upgraded to BREAK_IN_PROGRESS sloledb.cpp 4187
M Fri Aug 31 16:20:18 2007
M SosSearchAnchor: search anchor for 4
M ThIErrHandle: Entering ThReplyToMsg
M ThIErrHandle: Entering ThErrHdlUser
M ThErrHdlUser: set th_errno (11)
M ThErrHdlUser: save context
M ThSaveContext: roll out
M ThRollOut: roll out T9/U13/M0 (level=7, short_roll_out=0)
M ThRollOut: call rrol_out (1)
M ThRollOut: act roll state = DP_ROLLED_OUT
M ThRollOut: roll level <> 0, don't call ab_rollout
M ThRollOut: full roll out of U13 M0 I1 (Level 7) ok
M ThCheckEmMagic: check em magic at 3CC00A80 for T9/M0/I1
M ThCheckEmMagic: em magic at 3CC00A80 for T9/M0/I1 o.k.
M ThEmContextDetach2: detach T9/M0 from em memory (em_hdl=0, force=0)
M ThEmContextDetach2: reset local em info
B Disconnecting from ALL connections:
B Wp Hdl ConName ConId ConState TX PRM RCT MAX OPT Date Time DBHost B 000 000 R/3 000000000 ACTIVE YES YES NO 255 255 20070831 160937 IDES C Rollback Work (0)
B Disconnected from connection 0
B statistics db_con_commit (com_total=149, com_tx=34)
B statistics db_con_rollback (roll_total=1, roll_tx=0)
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 1680) [dpnttool.c 357]
M return from clean-up function ...
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B B Fri Aug 31 16:20:36 2007
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\I04\SYS\exe\run\dbmssslib.dll' ...
B Library 'C:\usr\sap\I04\SYS\exe\run\dbmssslib.dll' loaded
B Version of 'C:\usr\sap\I04\SYS\exe\run\dbmssslib.dll' is "640.00", patchlevel (0.26)
B New connection 0 created
M systemid 560 (PC with Windows NT)
M relno 6400
M patchlevel 0
M patchno 25
M intno 20020600
M make: multithreaded, ASCII
M pid 2460
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2460) [dpxxdisp.c 1160]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: JAVA is not active
M DpShMCreate: sizeof(wp_adm) 7456 (828)
M DpShMCreate: sizeof(tm_adm) 2219848 (11044)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpShMCreate: sizeof(comm_adm) 192000 (384)
M DpShMCreate: sizeof(vmc_adm) 0 (320)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 05230040, size: 2506248)
M DpShMCreate: allocated sys_adm at 05230040
M DpShMCreate: allocated wp_adm at 052317A8
M DpShMCreate: allocated tm_adm_list at 052334C8
M DpShMCreate: allocated tm_adm at 052334F0
M DpShMCreate: allocated wp_ca_adm at 05451438
M DpShMCreate: allocated appc_ca_adm at 05455A88
M DpShMCreate: allocated comm_adm_list at 054571F8
M DpShMCreate: allocated comm_adm at 05457210
M DpShMCreate: allocated vmc_adm_list at 05486010
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 05486038
M DpShMCreate: allocated wall_adm at 05486040
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
M <EsNT> Memory Reset enabled as NT default
X ES initialized.
M M Fri Aug 31 16:20:37 2007
M calling db_connect ...
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'C:\usr\sap\I04\SYS\exe\run\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 26
C patchcomment MSSQL: GetNextMsst1 error (754819)
C np:(local) connection used on IDES
C Using Provider SQLNCLI
C Provider Release:9.00.1399.06
C C Fri Aug 31 16:20:38 2007
C Using Provider SQLNCLI
C Cache sizes: header 52 bytes, 20000 names (26720000 bytes), 1000 dynamic statements (5432000 bytes), total 32152052 bytes
C Using shared procedure name cache IDES_I04I04_I04_MEM initialized by another process.
C Connected to db server : [IDES] server_used : [np:(local)], dbname: I04, dbuser: i04
C pn_id:IDES_I04I04_I04
B Connection 0 opened
B Wp Hdl ConName ConId ConState TX PRM RCT MAX OPT Date Time DBHost B 000 000 R/3 000000000 ACTIVE NO YES NO 255 255 20070831 162037 IDES C The IRow interface is supported by this OLEDB provider
M db_connect o.k.
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 098E0040, size: 4400128)
M SHM_ROLL_AREA (addr: 68200040, size: 160432128)
M SHM_PAGING_AREA (addr: 09D20040, size: 72351744)
M SHM_ROLL_ADM (addr: 0E230040, size: 1602056)
M SHM_PAGING_ADM (addr: 0E3C0040, size: 525344)
M ThCreateNoBuffer allocated 320144 bytes for 1000 entries at 0E450040
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 7424 bytes (50 server) at 0E4A0040
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 9
B dbtbxbuf: Buffer TABL (addr: 134C00C8, size: 30000128, end: 1515C4C8)
B dbtbxbuf: Buffer TABLP (addr: 0F3000C8, size: 10240000, end: 0FCC40C8)
B dbexpbuf: Buffer EIBUF (addr: 151600D0, size: 4194304, end: 155600D0)
B dbexpbuf: Buffer ESM (addr: 155700D0, size: 4194304, end: 159700D0)
B dbexpbuf: Buffer CUA (addr: 0FCE00D0, size: 3072000, end: 0FFCE0D0)
B dbexpbuf: Buffer OTR (addr: 159800D0, size: 4194304, end: 15D800D0)
M rdisp/reinitialize_code_page -> 0
M icm/accept_remote_trace_level -> 0
C Using Provider SQLNCLI
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 15EF7370
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 1DEF0098
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 1DEF02C8
S using messages for server info
S size of spec char cache entry: 165020 bytes (timeout 100 sec)
S size of open spool request entry: 1152 bytes
S immediate print option for implicitely closed spool requests is disabled
A A -PXA--
A PXA INITIALIZATION
A PXA: Fragment Size too small: 195 MB, reducing # of fragments
A System page size: 4kb, admin_size: 11476kb.
A Attached to PXA (address 24550040, size 400000K)
A abap/pxa = shared protect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A A ABAP ShmAdm attached (addr=56AF9000 leng=20955136 end=57EF5000)
A >> Shm MMADM area (addr=56E610E0 leng=134752 end=56E81F40)
A >> Shm MMDAT area (addr=56E82000 leng=17248256 end=57EF5000)
A RFC Destination> destination ides_I04_00 host ides system I04 systnr 0 (ides_I04_00)
A RFC Options> H=ides,S=00
A RFC FRFC> fallback activ but this is not a central instance.
A A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 1
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
A Hotpackage version: 38
M ThrCreateShObjects allocated 9394 bytes at 0FFD0040
N SsfSapSecin: putenv(SECUDIR=C:\usr\sap\I04\DVEBMGS00\sec): ok
N N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is C:\usr\sap\I04\SYS\exe\run\sapsecu.dll .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...sucessfully completed.
N =================================================
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
W =================================================
W === ipl_Init() called
W ITSP Running against db release 620!
W ITSP Disable Kernel Web GUI functionality
W === ipl_Init() returns 2, ITSPE_DISABLED: Service is disabled (sapparam)
W =================================================
M ThCheckPrevUser: clean previous user T9/U13/M0
M M Modeinfo for User T9/M0
M M tm state = 2
M uid = 13
M term type = 0x4
M display = 0x8
M cpic_no = 0
M cpic_idx = -1
M usr = >ABAP1 <
M terminal = >DDDC393 <
M client = >120<
M conversation_ID = > <
M appc_tm_conv_idx = -1
M imode = 1
M mode state = 0x12
M task_type = ZTTADIA
M th_errno = 11
M rollout_reason = 1
M last_rollout_level = 7
M async_receives = 0
M cpic_receive = 0
M em handle = 0
M roll state = 3
M abap state = 3
M em state = 2
M eg state = 1
M spa state = 3
M enq state = 0
M next hook = T-1/U-1/M255
M master hook = T-1/U-1/M255
M slave hook = T-1/U-1/M255
M debug_tid = 255
M debug_mode = 0
M mode type = 0x1
M debug = 0
M tcode = >ME21N <
M client conversation_ID = > <
M server conversation_ID = > <
M lock = 0
M max enq infos = 9
M act enq infos = 0
M em_hyper_hdl = 57F03BD8
M plugin_info = NULL
M act_plugin_hdl = -1
M act_plugin_no = 0
M max_plugin_no = 0
M C The IRow interface is supported by this OLEDB provider
M ***LOG R47=> ThResFree, delete (001023) [thxxmode.c 1283]I Got the same problem but at that time i have installed GUI of lower version. WHen i have upgraded the GUI it worked fine. Better you check once the SAPGUI configuration.
-
ERROR MESSAGE sap system manager:work process restarted, session terminated
Hi,
i am a beginer in SAP administration, users are getting this error message and i have done all my research and not able to resolve this issue. Here are the details
SAP Version :ideas 4.7
Database :Oracle
OS : windows 2003
Module user is working on MM
user working on it is a Super user with all the permissions
SAP is configure to run under the European date and decimal format.
I have never done any database administration on it, it is a new install and has been rarely used.
User creates a RFQ and when he tries saving it , seems like for the first time after either restarting the macine or restarting the service it might work and at time it might not, this is a very sporadic error and most of the times it crashes out with the message "sap system manager:work process restarted, session terminated" and kicks the user out of the session.
Below are the details of the error message from ST22 :
name of the runtime error : system_core_dumped
below are the details of the error message and its resoltion as suggested by sap help :
========
Runtime Errors SYSTEM_CORE_DUMPED
Occurred on 01.02.2008 at 07:52:19
Process terminated by signal " ".
What happened?
The current ABAP program had to be terminated because the
ABAP processor detected an internal system error.
The current ABAP program "SAPLCLSC" had to be terminated because the ABAP
processor discovered an invalid system state.
What can you do?
Make a note of the actions and input which caused the error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
An SAP System process was terminated by an operating system signal.
Possible reasons for this are:
1. Internal SAP System error.
2. Process was terminated externally (by the system administrator).
Last error logged in SAP kernel
Component............ "Taskhandler"
Place................ "SAP-Server server1_DEV_00 on host server1 (wp 1)"
Version.............. 1
Error code........... 11
Error text........... "ThSigHandler: signal"
Description.......... " "
System call.......... " "
Module............... "thxxhead.c"
Line................. 9555
How to correct the error
The SAP System work directory (e.g. /usr/sap/c11/D00/work ) often
contains a file called 'core'.
Save this file under another name.
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
To obtain this, call the system log with Transaction SM21
and select the "Print" function to print out the relevant
part.
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, you can either use the "PRINT" command in the editor or
print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
System environment
SAP Release.............. " "
Application server....... " "
Network address.......... " "
Operating system......... " "
Release.................. " "
Hardware type............ " "
Character length......... " " Bits
Pointer length........... " " Bits
Work process number...... " "
Short dump setting....... " "
Database server.......... " "
Database type............ " "
Database name............ " "
Database owner........... " "
Character set............ " "
SAP kernel............... " "
Created on............... " "
Created in............... " "
Database version......... " "
Patch level.............. " "
Patch text............... " "
Supported environment....
Database................. " "
SAP database version..... " "
Operating system......... " "
User, transaction...
Client.............. " "
User................ " "
Language key........ " "
Transaction......... "ME41 "
Program............. "SAPLCLSC"
Screen.............. "SAPMM06E 0320"
Screen line......... 71
Information on where termination occurred
The termination occurred in the ABAP program "SAPLCLSC" in "EXECUTE_SELECT".
The main program was "SAPMM06E ".
The termination occurred in line 131 of the source code of the (Include)
program "LCLSCF2G"
of the source code of program "LCLSCF2G" (when calling the editor 1310).
=============
i even tried increasing the dialog processes but with no use.The same error occurs.
I appreciate every one of help i can get, i am working on a deadline which is tomorrow evening to resovle this issue, any kind of help is highly appreciated.
thanks
mudessir.Hi
follow correction method suggested in this dump,
" The SAP System work directory (e.g. /usr/sap/c11/D00/work ) often
contains a file called 'core'. Save this file under another name."
have you done this?
with regards,
raj.
<i>pls, award points</i> -
PSADELETE process failure due to Internal Session Terminated.
Hi,
We have a PSADELETE process in Process chain which failed because of Internal Session Terminated error.
Now when i am trying to Repeat the process it is giving message Cannot activate job BI_PROCESS_PSADELETE (return code 8)
and the process is not starting again.
Please guide me the solution.
Thanks
SinghCan you check for more details in SM37 for the cancelled job log .
Do you have authorization to run 'repeat step ' ?
or display psadelete variant - identify the infopack/psa tables-> u can delete manually psa requests
Edited by: Srinivas on Jul 18, 2010 5:22 PM -
Wired dot1X session termination
Hi all,
Question about wired dot1X session termination.
After a client successfully done on the wired dot1x authentication, my authZ rule is follow by the VLAN assignement whereby DHCP server will provision a client IP to the PC.
But when the client doing these 2 action:
01. after get connected, disable the IEEE 802.1x option on the PC Ethernet port setting
02. after get connected, disable, then enable the PC Ethernet port setting (bouncing)
I found out these 2 actions will still get the user in authorized state, because it is not link down or port-bounce action. Session still persist at client PC.
My question :
Anything i can configure either on the switch or ISE will automatic trigger an action like send an EAPOL-Logoff message, causing the switch port to change to the unauthorized state?
Thanks
Component in use:
client OS: window 7
PEAP-MsCHAP V2
authentication mode : iser or computer authetnication
no check on single sign on
no check remember credential for connection each time logged on
no check fallback to unauthorized network access
ISE 1.1.3 with patch 4
Switchport configuration
interface G0/1
switchporGt mode access
switchport access vlan 61
authentication port-control auto
dot1x pae authenticator
authentication host-mode multi-auth
authentication order dot1x
authentication priority dot1x mab
no shutdown
endFor #2 - The session should terminate and restart if the Ehternet adapter on the PC bounces. Are you saying that even though the user disables/enables the adapter, the session remains active in ISE/NAD?
For #1 - I am not really sure as I have never played with this before. My guess would be "No" because once ISE sends the "Access Accept" back to the NAD (your switch in this scenario), the NAD won't know if you are disabling 802.1x. The EAPoL conversation already took place so there is no more 802.1x type traffic coming in and out of the NAD/Client on that port.
I suppose you can set a re-autn and inactivity timer on both the NAD and ISE but keep in mind that it is not recommended for those timers to be set at low values (minimum 1 hour). Otherwise you could overwhelm your ISE servers depending on how large your environment is.
You will need to add the following commands on the switchport:
authentication periodic
authentication timer reauthenticate server
authentication timer inactivity server
Then in ISE you will need to set the re-auth and the idle timers under the "Authorization Profile"
Another thing to keep in mind is that you should control what your users can and cannot do on their workstations via GPO (Group Policy). In normal circumstances a regular user should not have the privileges to disable 802.1x or their Ethernet adapter :)
Hope this helps!
Thank you for rating helpful posts! -
can any one send me the t-code of display document for F-29 post custom down payment?
- Payment transactions
F-06 Post Incoming Payments
F-07 Post Outgoing Payments
F-18 Payment with Printout
F-26 Incoming Payments Fast Entry
F-28 Post Incoming Payments
F-29 Post Customer Down Payment
F-31 Post Outgoing Payments
F-36 Bill of Exchange Payment
F-37 Customer Down Payment Request
F-39 Clear Customer Down Payment
F-40 Bill of Exchange Payment
F-47 Down Payment Request
F-48 Post Vendor Down Payment
F-52 Post Incoming Payments
F-53 Post Outgoing Payments
F-54 Clear Vendor Down Payment
F-58 Payment with Printout
F-59 Payment Request
F110 Parameters for Automatic Payment
F8BR Levels for Payment Requests
F8BS Detail display of payment requests
F8BT Display Payment Requests
F8BU Create payment runs automatically
F8BX Online Payment
F8XX Payment Request No. Ranges KI3-F8BM
FB03Z Display Document/Payment Usage
FB13 Release for Payments
FBA1 Customer Down Payment Request
FBA2 Post Customer Down Payment
FBA3 Clear Customer Down Payment
FBA6 Vendor Down Payment Request
FBA7 Post Vendor Down Payment
FBZ0 Display/Edit Payment Proposal
FBZ1 Post Incoming Payments
FBZ2 Post Outgoing Payments
FBZ3 Incoming Payments Fast Entry
FBZ4 Payment with Printout
FBZ5 Print Check for Payment Documen
FBZ8 Display Payment Run
FBZG Failed Customer Payments -
WebVPN session terminated: Service Unavailable
Hi
ASA specs
Cisco Adaptive Security Appliance Software Version 8.2(5)
Device Manager Version 6.4(2)
Compiled on Fri 20-May-11 16:00 by builders
System image file is "disk0:/asa825_k8.bin"
Config file at boot was "startup-config"
XXXX up 128 days 1 hour
failover cluster up 132 days 18 hours
Hardware: ASA5510, 256 MB RAM, CPU Pentium 4 Celeron 1599 MHz
Internal ATA Compact Flash, 256MB
BIOS Flash M50FW080 @ 0xffe00000, 1024KB
Seeing this issue occur in the afternoons usually. In the mornings WebVPN users are able to login successfully, then we start seeing some fail with the following in the log:
Oct 29 2014 15:02:44: %ASA-6-725003: SSL client outside:X.X.X.X/56221 request to resume previous seion.
Oct 29 2014 15:02:44: %ASA-6-725002: Device completed SSL handshake with client outside:X.X.X.X/562
Oct 29 2014 15:02:44: %ASA-6-725007: SSL session with client outside:X.X.X.X/56221 terminated.
Oct 29 2014 15:02:56: %ASA-6-725001: Starting SSL handshake with client outside:X.X.X.X/56226 for Tv1 session.
Oct 29 2014 15:02:56: %ASA-6-725003: SSL client outside:X.X.X.X/56226 request to resume previous seion.
Oct 29 2014 15:02:56: %ASA-6-725002: Device completed SSL handshake with client outside:X.X.X.X/562
Oct 29 2014 15:02:58: %ASA-6-716001: Group <GroupPolicy_XXXX> User <XXXX> IP <X.X.X.XWebVPN session started.
Oct 29 2014 15:02:58: %ASA-6-716002: Group <GroupPolicy_XXXX> User <XXXX> IP <X.X.X.XWebVPN session terminated: Service Unavailable.
I haven't seen this "Service Unavailable" before. Any ideas? Thanks
Regards
TimThanks. I don't think it's a license issue (see below).
I have raised with TAC
Cheers
XX-ASA# show vpn-sessiondb
Active Session Summary
Sessions:
Active : Cumulative : Peak Concurrent : Inactive
SSL VPN : 0 : 175 : 2
Clientless only : 0 : 18 : 1
With client : 0 : 157 : 2 : 0
Email Proxy : 0 : 0 : 0
IPsec LAN-to-LAN : 1 : 8 : 1
IPsec Remote Access : 2 : 100 : 3
VPN Load Balancing : 0 : 0 : 0
Totals : 3 : 283
License Information:
IPsec : 250 Configured : 250 Active : 4 Load : 2%
SSL VPN : 250 Configured : 250 Active : 0 Load : 0%
Active : Cumulative : Peak Concurrent
IPsec : 4 : 240 : 5
SSL VPN : 0 : 215 : 2
AnyConnect Mobile : 0 : 0 : 0
Linksys Phone : 0 : 0 : 0
Totals : 4 : 455
Tunnels:
Active : Cumulative : Peak Concurrent
IKE : 3 : 108 : 4
IPsec : 2 : 15 : 3
IPsecOverNatT : 2 : 99 : 4
Clientless : 0 : 175 : 2
SSL-Tunnel : 0 : 213 : 2
DTLS-Tunnel : 0 : 174 : 2
Totals : 7 : 784
Active NAC Sessions:
No NAC sessions to display
Active VLAN Mapping Sessions:
No VLAN Mapping sessions to display -
How can i start Terminal automatically? Best Terminal f.p3?
Hi!
How can i start Terminal automatically?
I want, that the or a terminal starts, after i am logged in in gnome? Which Terminal ist the best for a p3 700MHz? Xterm?
Thank you
bennyTo autostart applications, like ur terminal, u can go in the menu to "System" -> "Settings" -> "Sessions" and a windows opens in which u can achieve this and a bit more.
"Best" terminal in gnome would gnome-terminal. First try that one and if its too slow for some reason for you u might try urxvt. xterm is of course pretty small and fast, but lacks some neat features imo
cheers,
detto -
I have a new MacBook Pro w/ OS 10.6.4. & Safari 5.0.1 Right out of the box Adobe Reader would not display documents. I downloaded Adobe Reader 9.3.3 & installed. When attempting to see pdf files on Safari OR pdf files on my hard drive, all I will get is a dark grey screen. Blank. No message. No errors. My older G4 iMac has no problems. Only the Mac Book Pro with latest OS. I noticed that the Adobe web site listed version 9.3.3 available for Intel Mac OS 10.6.3. I also uninstalled Adobe then tried new download/installs several times, rebooting system after each uninstall and download. Does anyone have any idea what the issue is and how to fix it?
Carolyn: I was able, through more research in the discussion groups, to find a solution that resolved my problem! In the HD>applications folder>safari>get info I checked the "open in 32 bit mode" box. Then I went to Adobe Reader>preferences>Internet and unchecked the box "display PDF in browser using" [Adobe Reader 9.3.3]. I then closed my Safari Browser, restarted the computer and, happy days are here again! On my older G5 I only had to set the preferences on the Adobe Preferences, as Safari 5.0.1 only appears to work in 32 bit mode, as the 32 bit mode check box was not there. You may want to pass this on to other users with the same or similar problems.
-
I installed CS6 on my new retina MacBook pro laptops. InDesign and Acrobat display document pixilated. I ran the updates and it fixed Illustrator and Photosho, but not InDesign and Acrobat. What can I do to make them display in high resolution? HELP!
InDesign CS6 is not optimized for retina displays. You’ll need to move to Creative Cloud for retina compatibility.
-
Document in BSEG but not in BKPF. Message displays Document not in Database
Good day!
We are using SAP 4.6C.
Our client wants to display a document posted some time ago using FB03.
The message displayed, "Document not in database. Search Document archive?"
I looked for the document in BSEG and found that the document exists there.
However, the document header data are missing in BKPF.
Is there a transaction code that could have archived/removed the data in BKPF while
not changing anything in BSEG?
Could there be a way to retrieve these data?
Thank you!Good Day !
For your information, the pop up message prompting for archived mesages "Document is not in database. Search document archive? " is not present anymore in the release ECC 6.0. This pop existed in your release and this has been phased out as part of continuous product improvement after inputs from various customers.
In the newer releases instead of this pop up we have the message
"Document XXXX XXXXXXXXX XXXX is already archived" being displayed at the lower bottom of the screen. This helps you identify that the document was archived. This is the standard SAP behaviour.
Therefore, your document is archived. To able to retrieve this document again you can use Tcode FBL3N and change the Data source option (there is a button for that) to Archived Data.
The same you achieve in FB03 when you select Document List button and then Data Sources Button, mark the option Archive.
I hope this helps.
Best Regards,
Vanessa. -
Display document in the Single Document web item -authorization problem.
Hi Gurus,
I have a problem.
I have two types of users, users for display document in the Single
Document web item and users who can maintain and create new comment in
the Single Document web item.
My problem is I can't create users that can only display documents (all
users who can display the query can add new comment).
We use the new 7.0 Authorization.
The authorization object S_RS_ADMWB doesnu2019t influence about the
activity in the Single Document web item.
In the new authorization method, in PFCG or in RSECADMIN there is no
functionality that we can separate between the two types of users I
mention before.we used S_RS_COMP & S_RS_COMP1.
Please advice
Sharon.Hi Sankar,
this may be helpful
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/e3/ae133bdca84047e10000000a11402f/content.htm">http://help.sap.com/saphelp_nw04/helpdata/en/e3/ae133bdca84047e10000000a11402f/content.htm</a>
Pavel -
SAP Portal Display Documents is hanging with Null Pointer Exception
Hi I am having problems with an iview from the products section of SAP standard iviews
In my portal page I have the following three iviews, find documents, display master data and display documents both the find docs and display master data work great, but the display documents seems to hang and a java Null Pointer Exception shows in the data frame of IE. It hangs up the whole page and I have to keep hitting back button to close the window and open. I have the following in config for web front end
DOC_OBJ is mapped to DOKAR, DOKNR, DOKVR and DOKTL with default set.
DOC_REQ is set to DOKAR default checked
EQUI_REQ is set to EQUI-EQUNR default checked
This is under SIMG_SPORT -> products -> select data fields for web front end
Am I missing something?
Cheers,
DevlinThe following code is your problem:
//-------construct
public void MySlide()
contents = new Tile[ROWS][COLS];
reset();
}Constructors don't return anything including void. Therefore you really aren't calling the above method as you assume in your main method as it is not a constructor. Remove the void keyword and your initializing code will execute properly. -
Display document from Content Server
Hello Expert,
I need to display document in CE portal, that are stored on ECC content server.
Does anyone know how to do this?
Thank you in advance.
Francois
Edited by: François BECKER on Oct 13, 2011 9:39 AMHi,
Try using this sample code
class lcl_handle_events definition.
public section.
methods:
on_double_click for event double_click of cl_salv_events_table
importing row column.
endclass. "lcl_handle_events DEFINITION
class lcl_handle_events implementation.
method on_double_click.
if column = 'INSTID'.
clear gv_usrnme.
*Reading the ALV table to get the purchase order number
read table gt_usrnme into gv_usrnme index row.
if sy-subrc = 0.
*Passing the value of the PO number to ME23N Transaction
set parameter id 'BES' field gv_usrnme-instid.
*Calling ME23N
call transaction 'ME23N'.
endif.
endif.
endmethod.
data gv_event type ref to lcl_handle_events. "events object
gv_events = gs_table->get_event( ).
create object gv_event.
*... §6.4 register to the event Link_CLICK
set handler gv_event->on_double_click for gv_events.
Hope this helps you. Here i was calling a different transaction code based on each line selection..
Regards
Ansari
Maybe you are looking for
-
Error while doing Std.cost estimation.
Hallo gurus, I am facing one problem while doing Std.Cost estimation. Let me explain in detailed.. I am doing costing estimation for a Product. This product contains both Bought out Material and Customer Supplied Products.But both are coming as Mater
-
Hi All, I am facing a performance related problem. We had a recent hardware upgrade . before the upgrade , during the non peak hours the CPU idle time was 95 % but now (after upgrade) even though the data load and query load remains the same , the c
-
Why are L&R outputs uneven w/ Space Designer?
Hi, In tweaking my studio setup, I took this approach to balancing my monitors: I loaded the TestOsc plugin - which gave a balanced L & R output within Logic as expected; I then adjusted the amps of each monitor speaker so as to properly balance them
-
Compand-type needed despite bearer capability
In voice-port one needs to configure the correct companding type to avoid garbled audio on incoming calls. Being the compand law already specified in the ISDN SETUP for incoming calls, I do not see the strict need to configure explicitely the compand
-
I'm trying to sign some pdf documents with my tablet. I'm using the pen tool in acrobat, signing it, saving and then when it opens it preview the signature is not visible. Because what I did I guess was just adding a comment. How can I write on top o