Display does not display any color
I have just installed the latest Java for Mac OS X 10.5 Update 4 and all the color has disappeared from my display, hence everything is in black and white. I am not absolutely certain but I think that is the last thing I did before the color disappeared. I have run ColorSync Utility and the first aid profile log has found an item to be incorrect but is incapable of crrecting it, claiming that it is locked when it is not. It says
"/Library/Application Support/Adobe/Color/Profiles/Recommended/CoatedFOGRA27.icc
Tag 'desc': Tag size is not correct.
The file is locked. Could not be fixed."
I have also run repair permissions in Disk Utility a number of times. Each time it claims to have repaired a long list of permissions but when I rerun it, it still has to repair the same long list of permissions.
When i log in or restart I have full color so it is only a software problem. I have checked settings in System preferences and they haven't been changed and are set for millions of colors.
Any ideas on what's wrong and how it can be fixed.
dysong2 wrote:
I have just installed the latest Java for Mac OS X 10.5 Update 4 and all the color has disappeared from my display, hence everything is in black and white.
When i log in or restart I have full color so it is only a software problem.
It is not clear at exactly what point you have no colour. You say you have no colour
then you say you have colour after you login or restart.
Dave
Similar Messages
-
I have prepared a photo book, made a pdf and when I press "buy thhe book" it tells me that the book is missing photos on one ore more pages. The book does not miss any photos or text, all layouts are ok, the background color is ok. Can anybody help me?
You are missing one or more photos - youprobably have a page background that requires a photo which is behind a page with photos on it - all pages must either have a photo or be a color - if you have a gray background it requires a photo - look through the book carefully and be sure to look at the background on any full page photos - you will find one or more missing photos
LN -
The paint bucket tool is not working properly. The colors does not change, any suggestion?
Maybe on the wrong layer.
It would be more beneficial if you capture your screen with the layers panel open and any layers that are collapsed, expand them. -
my itunes in pc fails to secure link with itunes store it shows the process bar it automatically quits the process it also does not shows any on the screen. i am using windows xp service pack 3. what shoul i do?
Diagnostics test
Microsoft Windows XP Professional Service Pack 3 (Build 2600)
ECS G31T-M7
iTunes 10.5.2.11
QuickTime 7.6.9
FairPlay 1.13.37
Apple Application Support 2.1.6
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 4.0.0.97
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 0012ABAC07F3CCB0
Current user is an administrator.
The current local date and time is 2011-12-31 14:06:21.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is not supported. (16005)
Video Display Information
Intel(R) G33/G31 Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {7599FAD1-1BB9-4AC6-80AF-404253DC519E}
Description: Atheros L2 Fast Ethernet 10/100 Base-T Controller - Packet Scheduler Miniport
IP Address: 192.168.1.5
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
DHCP Enabled: Yes
DHCP Server: 192.168.1.1
Lease Obtained: Sat Dec 31 13:46:09 2011
Lease Expires: Tue Jan 03 13:46:09 2012
DNS Servers: 192.168.1.1
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was unsuccessful.
The network connection timed out.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-12-31 14:00:02.
**** Device Connectivity Tests ****
iPodService 10.5.2.11 is currently running.
iTunesHelper 10.5.2.11 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Connected Device Information:
rawkiss’s iPhone, iPhone 3G running firmware version 4.0
Serial Number: 86931UEAY7H
**** Device Sync Tests ****
Sync tests completed successfully.I have found a fix after doing additional research through this forum. Tech Note #328730 addresses this problem and it works for Photoshop Album 3.2 even though it was written for release 1.0.
Here is a link that will take you directly to the Tech Note:
http://kb.adobe.com/selfservice/viewContent.do?externalId=328730
When using this fix the Tech Note indicates:
"Imported image data and tags are lost when you re-create the My Catalog.psa file, so you need to reimport images and reapply any tags"
however it did retain the captions (at least it did for me). -
How do i update 10.5.8 if my macbook does not show any software updates?
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
Snow Leopard General Requirements
1. Mac computer with an Intel processor
2. 1GB of memory
3. 5GB of available disk space
4. DVD drive for installation
5. Some features require a compatible Internet service provider;
fees may apply.
6. Some features require Apple’s iCloud services; fees and
terms apply.
Upgrading from Snow Leopard to Lion or Mountain Lion to Mavericks
To upgrade to Mavericks you must have Snow Leopard 10.6.8, Lion, or Mountain Lion installed. Purchase and download Mavericks (Free) from the App Store. Sign in using your Apple ID. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mavericks- System Requirements
Macs that can be upgraded to OS X Mavericks
1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
Model Identifier 5,1 or later
3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
See App Compatibility Table — RoaringApps.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
Lion System Requirements
1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
or Xeon processor
2. 2GB of memory
3. OS X v10.6.6 or later (v10.6.8 recommended)
4. 7GB of available space
5. Some features require an Apple ID; terms apply. -
Search Item drop-down does not show any data for Advanced Search.
Hi,
I have a requirement to add a new criteria to the existing Advanced Search region of 'My Employee Information' in Manager Self Service responsibility. I substituted the AdvancedSearchVO to include the new column. Using personalization i did the below steps to show the new column in the page,
1) Created a 'Message Styled Text' item under Table Layout region to display the result. I associated the View Instance (AdvancedSearchVO1) and View Attribute (AttrColumn).
2) In Advanced Search Panel created a new CriteriaRow and set the 'Search Allowed' property to True.
3) In Advanced Search Mappings i tried to create the new mapping but the Search Item drop-down does not show any of the CriteriaRow item. But Results Item shows the 'Message Styled Text' item created in step 1 above.
Any idea what i would be missing becasue of which 'Search Item' property does not show any data?
I am using OAF version 12.1.1.
Thanks, SureshHi,
I faced the same situation but i still waiting for the solution.. this is my problem's thread..
Addition of LOV Search Filter using Personalization
But when i tried to create a new custom page with advanced table and created a new LOV column via personalization. i was able to create new search mapping.. but this is not happening in the seeded page case :(.
I m also looking for solution...if any one can provide some inputs on it , will be highly appreciated.
Thanks
Renu -
Document 4500016031 does not contain any selectable items
Hi Friends,
I am doing MIGO(godds receipt) and adopted following procedure for MIGO.
ME5J----->(Entered my Proj. defn---> executed
Select material T-20610.
Click the "Assign automatically" pushbutton.
Assign materials T-20620 and T-20630 the same way.
Display the overview of the assignments and then create the purchase order.
Click the "Assignments" pushbutton.
The purchase requisitions are sorted in the overview according to their assignments. You can create new purchase orders by clicking the "Process assignment" pushbutton.
Place your cursor on the line below vendor "C.E.B.".
Click the "Process assignment" pushbutton.
Confirm the first dialog box by clicking the "Continue" pushbutton.
If another dialog box appears, click "New purchase order".
The purchase order appears.
On the left-hand side of the overview, select your three purchase requisitions and copy them to the purchase order.
Click the "Copy" pushbutton.
Save the purchase order.
Click the "Save" pushbutton.
The purchase order number appears in the status bar.
Make a note of the order number: ____4500016031________
Now I got the PO as per above procedure Now While I am doing MIGO---Goods receipt am getting the below message.
Any pointers is appreciated and will be rewarded.
Document 4500016031(PO) does not contain any selectable items
Message no. M7064
Diagnosis
The document or document item entered cannot be adopted.
Possible reasons for this are:
o The document items have already been processed
(Suggest zero lines indicator set?).
o the document items have been deleted or are blocked.
o the document items have been created for a different plant.
o (for reservations only) movements are not yet allowed for the
reservation items.
o (for reservations only) the document items are retrograde components
of the order. These are posted using the order confirmations.
o A confirmation must exist for the document items.
o The document items must be released first.
o The document is an R/2 document.
Procedure
Make sure your entries are correct.
o If the system has already processed the total quantity, you can set
the Suggest zero lines indicator. The system will suggest the
quantity zero for the items that have already been processed.
o If you have entered a particular item, cancel the item. If you do
not enter an item, the system searches all of the open items in the
o If the document is a purchase order, production order or a
reservation, you can enter search criteria in the dialog box.
You access the dialog box by choosing Enter with reference on the
initial screen.
o If the document is an SAP R/2 document, you have to cancel it
manually by entering the reversal movement type.
RegardsHi
Check item level Confirmation tab I think this PO is activated for Inbound delivery or Confirmation control
vIVEK -
Expense Report Summary page does not show any totals - only zeros
Hi All,
On creation of Expense Report in the portal When entering a billable expense report, when you get to the summary page is does not show any totals - only zeros for other two schema's its working fine like displaying totals
we are surprised that any custom development is hitting or anything relates with configuration
Provide valuable inputs to proceed further
Regards
JaipalHello vetsrini.
Thanks a lot for your kind reply. As i said, i'm new to this and sometimes i just cannot pass over some problems. Here are the fields i have inserted:
<?for-each:LIST_G_SETUP/AS_OF_DATE?>
<?end for-each?>
<?for-each@section:G_CUST_INV?>
<?for-each:G_1?>
<?INVNUM?>
<?INVOICE_TYPE_INV?>
<?DUE_DATE_INV?>
<?sum (C_INV_BALANCE)?>
<?sum (C_INV_B0)?>
<?sum (C_INV_B1)?>
<?sum (C_INV_B2)?>
<?sum (C_INV_B3)?>
<?sum (C_INV_B4)?>
<?sum (C_INV_B5)?>
<?end-for-each-group?>
<?TOTAL_INV_AMT_DSP?>
<?TOTAL_INV_B0_DSP?>
<?TOTAL_INV_B1_DSP?>
<?TOTAL_INV_B2_DSP?>
<?TOTAL_INV_B3_DSP?>
<?TOTAL_INV_B4_DSP?>
<?TOTAL_INV_B4_DSP?>
<?end for-each:G_CUST_INV?>
In the header of the template i also have <?CUST_NAME_INV?> and the report date. When i try to enter the <?AS_OF_DATE?> it is not printed and also the header is not shown any longer. Once again, thank you for any help,
Octavio -
Javaw.exe does not generate any output?
I must have something set up wrong ... when I use JAVAW.EXE on the "Hello world" class in the tutorial found on java.sun.com, nothing happens. I tried it with the VERBOSE switch also, and still nothing happens. The only output I ever see occurs if I intentionally generate an error, and then I see a windows messagebox. JAVA.EXE works fine in the console, however.
OS: Win 2000 professional
Thanx :)Hello Robert!
How can i generate a new console window with text displayed in it, on clicking a button in a frame using java.exe or javaw.exe?
- Sanjay
If i remember correctly the Hello World program prints
a line to the comamnd prompt, and does not conatain
any frames. If that is the case and the only output
the program creates is by using System.out then it
logical you don't see anything using javaw. javaw is a
program that hides the dos-box on a windows machine.
This prevents users from seeing it wich makes a
frame/window'ed application look more professional. So
if you only have output to the console you don't see
it because it is hidden.
Hope This Helps You,
Robert -
"An autonomous transaction does not see any changes made by main transact"
Hi,
I'm trying to reproduce the "An autonomous transaction does not see any changes made by main transaction" reffered on :
Oracle® Database Application Developer's Guide - Fundamentals
10g Release 2 (10.2)
Part Number B14251-01
chapter 2 SQL Processing for Application Developers
Paragraph : Autonomous TransactionsI set up a simple case...
create table emp_ as select * from emp
begin
update emp_ set hiredate=hiredate+100 where empno=7934;
end;
create or replace trigger trg_emp_
after insert or update on emp_
for each row
declare
pragma autonomous_transaction;
emp_var emp.hiredate%type;
begin
select hiredate
into emp_var
from emp_
where empno=:new.empno;
dbms_output.put_line('empno: '||:new.empno);
dbms_output.put_line('old hiredate: '||:old.hiredate);
dbms_output.put_line('new hiredate: '||:new.hiredate);
end;Prior to any change...
SQL> select empno,hiredate from emp_;
EMPNO HIREDATE
5498 21/4/1982
5499 11/10/1981
5411 10/10/1981
5410 10/10/1982
7369 17/12/1980
7499 20/2/1981
7521 22/2/1981
7566 2/4/1981
7654 28/9/1981
7698 1/5/1981
7782 9/6/1981
7788 19/4/1987
7839 17/11/1981
7844 8/9/1981
7876 23/5/1987
7900 3/12/1981
7902 3/12/1981
7934 23/1/1982After the change...
SQL> begin
2 update emp_ set hiredate=hiredate+100 where empno=7934;
3 end;
4 /
empno: 7934
old hiredate: 23/01/82
new hiredate: 03/05/82
PL/SQL procedure successfully completedAccording to the Oracle doc the select of the autonomous transaction should not see the change made to the hiredate column of the table in the main transaction(in the anonymous block)....
What may i do wrong..????
Thank you,
SimSimon:
As Tubby pointed out, your dbms_output commands do not display the value you selected in the trigger. Your trigger based demonstration needs to be more like:
SQL> SELECT * FROM t;
ID DT
1 05-SEP-2009
2 17-JUL-2009
SQL> CREATE TRIGGER t_ai
2 AFTER INSERT OR UPDATE ON t
3 FOR EACH ROW
4 DECLARE
5 PRAGMA AUTONOMOUS_TRANSACTION;
6 l_dt t.dt%TYPE;
7 BEGIN
8 SELECT dt INTO l_dt
9 FROM t
10 WHERE id = :new.id;
11 DBMS_OUTPUT.Put_Line ('ID: '||:new.id);
12 DBMS_OUTPUT.Put_Line ('Old dt: '||:old.dt);
13 DBMS_OUTPUT.Put_Line ('New dt: '||:new.dt);
14 DBMS_OUTPUT.Put_Line ('Aut dt: '||l_dt);
15 END;
16 /
Trigger created.
SQL> UPDATE t SET dt = sysdate WHERE id = 2;
ID: 2
Old dt: 17-JUL-2009
New dt: 25-OCT-2009
Aut dt: 17-JUL-2009
1 row updated.So, the automomous transaction select did not see the changed value of dt.
I know you are just trying to understand automomous transactions here and would never do sometihg like this in production right? :-)
Your trigger, as written, has some interesting side effects because of the automomous transaction. For example:
SQL> INSERT INTO t VALUES(3, sysdate - 25);
INSERT INTO t VALUES(3, sysdate - 25)
ERROR at line 1:
ORA-01403: no data found
ORA-06512: at "OPS$ORACLE.T_AI", line 5
ORA-04088: error during execution of trigger 'OPS$ORACLE.T_AI'
SQL> UPDATE t SET id = 3 where trunc(dt) = TO_DATE('05-Sep-2009', 'dd-mon-yyyy');
UPDATE t SET id = 3 where trunc(dt) = TO_DATE('05-Sep-2009', 'dd-mon-yyyy')
ERROR at line 1:
ORA-01403: no data found
ORA-06512: at "OPS$ORACLE.T_AI", line 5
ORA-04088: error during execution of trigger 'OPS$ORACLE.T_AI'John -
Code does not make any effect:need help
hello friends,
now i am going to describe the problem i am phasing
actually i have embedded japplets in a jsp page(appletjsp) and want to communicate japplets indeed jsp to a servlet in the diffrent derectory but in same context root.
moreover, i have written code at applet and servlet side both. actually there is a next button in one of japplets(embedded in appletjsp) and i have written the code(for servlet communication) inside button's mouse clicked event. and at servlet side, as usual i have got an inputstream from request and want to forward this request(after getting request dispatcher) to another jsp page(proposing to display this jsp page after clicking next button inside appletjsp ).
now the problem that made me a bit confused is that when i click next button after running jsp page(containing japplets) then neither there is any error/exception at server/IE's sun java console nor any effect of code at servlet side.
actually i am not sure that the servlet side code does not make any effect rather it is ony my assumption.
although i am very new in java and as what i know, to send back response to client side, servlet class needs to be run at server side and probabbly for that there must be a sepreat request from client's applet to server(please dont flame me if i am wrong).
so please tell me how can i get running another jsp page running(to which i trying to get request dispatcher inside servlet) after clicking next button?
applet code
try{
String[] data ={"santosh","kumar","tripathi"};
String strwp ="/UASProject/RegistrationData";
URL jspURL = new URL(getCodeBase(),strwp);
System.out.println(jspURL);
URLConnection jspCon = jspURL.openConnection();
jspCon.setUseCaches(false);
jspCon.setDoOutput(true);
jspCon.setDoInput(false);
jspCon.setDefaultUseCaches(false);
jspCon.setRequestProperty("Content-Type", "application/x-java-serialized-object");
BufferedOutputStream bos=new BufferedOutputStream( jspCon.getOutputStream());
ObjectOutputStream oboutStream = new ObjectOutputStream(bos);
oboutStream.writeObject(data);
oboutStream.flush();
bos.close();
oboutStream.close();
// getAppletContext().showDocument(new URL(getCodeBase().getProtocol(),getCodeBase().getHost(),getCodeBase().getPort(),"/UASProject/faces/Editpage.jsp"),"_self");
}catch(Exception e)
{System.out.println(e);}servlet code
try {
// response.setContentType("application/x-java-serialized-object");
BufferedInputStream bis=new BufferedInputStream( request.getInputStream());
ObjectInputStream inputFromjsp = new ObjectInputStream(bis);
reg_data = (String[])inputFromjsp.readObject();
out.println(reg_data[1]);
bis.close();
inputFromjsp.close();
HttpSession session =request.getSession(true);
session.setAttribute("first_name",reg_data[0]);
getServletContext().getRequestDispatcher("http://localhost:8084//UASProject/faces/Editpage.jsp").forward(request,response);
} catch (Exception e) {e.printStackTrace();} although this topic has been made too long, even then please fix my problem.
thanksWhen you formatted the system you erased everything on the harddrive, obviously, and so its just a matter of putting back the Apps and data that you want from your Backup that you made, BEFORE reformatting the harddrive. You did make a backup, didn't you?? Your Time machine or other external harddrive backup can be used with Migration Assistant to return the iLife Apps to the iMac. If he indeed purchased the iLife Apps from the App Store, then you would need to use His Apple ID account to redownload them; not yours.
Oh, and to answer your other question, no, iLife is not a part of any version of OSX itself.
Hope this helps
Message was edited by: Radiation Mac -
Since IOS7,The synchronization itunes does not work any more
since IOS7, the synchronization itunes does not work any more....
Hi martinafromlimassol,
Welcome to the Apple Support Communities!
I understand that you iPhone has been dropped and the display no longer functions. In this situation, it may be necessary to have your iPhone 5 evaluated for repair. Please use the attached link for information on the process of having your iPhone evaluated.
iPhone Repair and Service - Apple Support
Best regards,
Joe -
Selected model does not contain any target value prior
Hi ODM experts,
I have tried to apply the SVM alg in order to find anomalous records.The table source have rows like that:
uniq_rec ID NAME A1 A2 A3 A4 A5 data
577 2052956018 NAMEHDRCP8 2.27 0.4 85.46 0.01 14.54 24-JAN-13
578 1250914484 NAMEDJDRVP3 11.45 1.24 56.24 0.01 43.77 24-JAN-13
579 1968689283 NAMEDKEND12 0.000011 6.78 0.000029 0.01 0.091 24-JAN-13
580 2063389130 NAMEDNMXG14 0.000011 0.65 36.65 0.02 0.091 24-JAN-13
unq_rec is the pk, id is the id for the generic name and A1 .. A5 attributes ,data when collection occur etc
I'm trying to execute the following code:
drop table ALG_SET;
exec dbms_data_mining.drop_model('SVMODEL');
create table ALG_SET (setting_name varchar2(30), setting_value varchar2(4000));
insert into ALG_SET values ('ALGO_NAME','ALGO_SUPPORT_VECTOR_MACHINES');
insert into ALG_SET values ('PREP_AUTO','ON');
commit;
Begin
dbms_data_mining.create_model('SVMODEL', 'CLASSIFICATION', 'ODM_PAR_FIN_HIST', 'UNQ_CRT', null, 'ALG_SET');
end;
The results is the following error:ORA-40104: invalid training data for model build ( if I run the code) .If I run from graphical interface I have obtained this
error code " Selected model does not contain any target value prior"(using the similar model - SVM for anomaly detction plus the same source table )
Please advice what is missing or wrong and if possible how to bypass this issue.
Thanks in advance for support.
Best Regards,
BogdanHere is also a newer example of creating a SVM Anomaly model from ODM sample code (12.1 version but this applies to 11.2):
Rem
Rem $Header: rdbms/demo/dmsvodem.sql /main/6 2012/04/15 16:31:56 xbarr Exp $
Rem
Rem dmsvodem.sql
Rem
Rem Copyright (c) 2004, 2012, Oracle and/or its affiliates.
Rem All rights reserved.
Rem
Rem NAME
Rem dmsvodem.sql - Sample program for the DBMS_DATA_MINING package.
Rem
Rem DESCRIPTION
Rem This script creates an anomaly detection model
Rem for data analysis and outlier identification using the
Rem one-class SVM algorithm
Rem and data in the SH (Sales History)schema in the RDBMS.
Rem
Rem NOTES
Rem
Rem
Rem MODIFIED (MM/DD/YY)
Rem amozes 01/23/12 - updates for 12c
Rem xbarr 01/10/12 - add prediction_details demo
Rem ramkrish 06/14/07 - remove commit after settings
Rem ramkrish 10/25/07 - replace deprecated get_model calls with catalog
Rem queries
Rem ktaylor 07/11/05 - minor edits to comments
Rem jcjeon 01/18/05 - add column format
Rem bmilenov 10/28/04 - bmilenov_oneclass_demo
Rem bmilenov 10/25/04 - Remove dbms_output statements
Rem bmilenov 10/22/04 - Comment revision
Rem bmilenov 10/20/04 - Created
Rem
SET serveroutput ON
SET trimspool ON
SET pages 10000
SET echo ON
-- SAMPLE PROBLEM
-- Given demographics about a set of customers that are known to have
-- an affinity card, 1) find the most atypical members of this group
-- (outlier identification), 2) discover the common demographic
-- characteristics of the most typical customers with affinity card,
-- and 3) compute how typical a given new/hypothetical customer is.
-- DATA
-- The data for this sample is composed from base tables in the SH schema
-- (See Sample Schema Documentation) and presented through a view:
-- mining_data_one_class_v
-- (See dmsh.sql for view definition).
-- BUILD THE MODEL
-- Cleanup old model with the same name (if any)
BEGIN DBMS_DATA_MINING.DROP_MODEL('SVMO_SH_Clas_sample');
EXCEPTION WHEN OTHERS THEN NULL; END;
-- PREPARE DATA
-- Automatic data preparation is used.
-- SPECIFY SETTINGS
-- Cleanup old settings table (if any)
BEGIN
EXECUTE IMMEDIATE 'DROP TABLE svmo_sh_sample_settings';
EXCEPTION WHEN OTHERS THEN
NULL;
END;
-- CREATE AND POPULATE A SETTINGS TABLE
set echo off
CREATE TABLE svmo_sh_sample_settings (
setting_name VARCHAR2(30),
setting_value VARCHAR2(4000));
set echo on
BEGIN
-- Populate settings table
-- SVM needs to be selected explicitly (default classifier: Naive Bayes)
-- Examples of other possible overrides are:
-- select a different rate of outliers in the data (default 0.1)
-- (dbms_data_mining.svms_outlier_rate, ,0.05);
-- select a kernel type (default kernel: selected by the algorithm)
-- (dbms_data_mining.svms_kernel_function, dbms_data_mining.svms_linear);
-- (dbms_data_mining.svms_kernel_function, dbms_data_mining.svms_gaussian);
-- turn off active learning (enabled by default)
-- (dbms_data_mining.svms_active_learning, dbms_data_mining.svms_al_disable);
INSERT INTO svmo_sh_sample_settings (setting_name, setting_value) VALUES
(dbms_data_mining.algo_name, dbms_data_mining.algo_support_vector_machines);
INSERT INTO svmo_sh_sample_settings (setting_name, setting_value) VALUES
(dbms_data_mining.prep_auto, dbms_data_mining.prep_auto_on);
END;
-- CREATE A MODEL
-- Build a new one-class SVM Model
-- Note the NULL sprecification for target column name
BEGIN
DBMS_DATA_MINING.CREATE_MODEL(
model_name => 'SVMO_SH_Clas_sample',
mining_function => dbms_data_mining.classification,
data_table_name => 'mining_data_one_class_v',
case_id_column_name => 'cust_id',
target_column_name => NULL,
settings_table_name => 'svmo_sh_sample_settings');
END;
-- DISPLAY MODEL SETTINGS
column setting_name format a30
column setting_value format a30
SELECT setting_name, setting_value
FROM user_mining_model_settings
WHERE model_name = 'SVMO_SH_CLAS_SAMPLE'
ORDER BY setting_name; -
Request does not contain any saved update rules; rollback not possible
Hi,
In BW on hana, there's a 3.x flow DSO where it loaded a request from PSA.
It failed due to activation error SID Generation. But unfortunately, due to PSA Deletion process chain, it's PSA Request got deleted.
Now, we couldn't delete the red request(failed request) from the 3.x flow DSO.
If we try to delete, it shows job has been completed successfully with the following message:
Job started
Step 001 started (program RSDELPART1, variant &0000000004233, user ID )
Delete running: DataStore object ZREBATE, from 630,138 to 630,138
Delete is scheduled; Selection conditions were substituted
Request REQU_6412GVIEWBJ0TZZIMZE2TZIOR does not contain any saved update rules; rollback not possible
Deletion of request REQU_6412GVIEWBJ0TZZIMZE2TZIOR from data target ZREBATE failed
Deletion of request REQU_6412GVIEWBJ0TZZIMZE2TZIOR from data target ZREBATE failed
Request REQU_6412GVIEWBJ0TZZIMZE2TZIOR does not contain any saved update rules; rollback not possible
Job finished
I went to the table RSICCONT and checked the mentioned request. But I couldn't find delete option enabled. Even our basis team doesn't have authorization to delete the mentioned request from the standard table RSICCONT.
Request you to please help me how to handle this.
Regards,
Antony Jerald.Hi Antony,
Once you have deleted the data in PSA there is no way to reconstruct the request hence you can do below things to correct it
1) Identify the No of Records which having error , because if you have more records it will take more time as in debug mode we have option to edit only one record at one.
2) Display only one record in Active table and change it using the Debug option ( not recommended ), but as you are in corner we need to use this
3) change the records with respective values and active the request again
Regards
Jagan -
Dump showing that table does not contain any elements.
Hi All,
I have a table, with lead select.Based on the row selected, corresponding values of the row are filled in the input fields.
I filter the table and only those rows are displayed which has status "waiting". Now the problem is when there is only one row with status "waiting", and process it, its status changes to "done", as a result of which there is no row in the table, and i get following error:
Adapter error in INPUT_FIELD "IF_STATUS" of view "ZPWB.DISTRIBUTE_VIEW": Context binding for property VALUE cannot be resolved: The DISTRIBUTE_VIEW.1.PD_ITEMS_TAB node does not contain any elements
Can you please help out:)I have now the same problem.
somebody found out what the solution is for that issue?
if i have an empty context i get a dump due to the context binding. what is the work around? -
Context node does not contain any elements
Hi Masters,
I create a node dynamically from structure using CL_WD_DEMO_DYN_MODEL->create_nodeinfo_from_struct method. my code as
nd_field_info = nd_field->get_node_info( ).
wd_this->zwd_assist->create_nodeinfo_from_struct( EXPORTING
parent_info = nd_field_info
structure_name = dotablename
is_multiple = abap_true ).
When am set the data to context then it gives the error like node does not contain any elements, but i verified the attributes using nodeinfo then all attributes will be displayed, but when value inserting time it throws error.
Waiting for Your Response...
Advance Thankyou
Regards,
SathyaHi sathya ,
the method you using is absolute , the replacement for the methos is if_wd_context_node_info->add_new_child_node
pls refer the sample code to create a dynamic Node .
DATA: pa0001 TYPE REF TO cl_abap_structdescr,
comp_tab TYPE cl_abap_structdescr=>component_table,
struct_type TYPE REF TO cl_abap_structdescr,
ls_pa0001 ?= cl_abap_typedescr=>describe_by_name('P0001').
comp_tab = p0001->get_components( ).
struct_type = cl_abap_structdescr=>create( comp_tab ).
struct_type = cl_abap_structdescr=>create( comp_tab ).
* now the nodeinfo is created
node_info = wd_context->get_node_info( ).
node_info = node_info->add_new_child_node(
name = 'MY_NODE'
IS_MANDATORY = ABAP_true
IS_MULTIPLE = ABAP_true
STATIC_ELEMENT_RTTI = struct_type
IS_STATIC = ABAP_false
refer DEMODYNAMIC component for dynamic creation of node
regards
Chinnaiya P
Edited by: chinnaiya pandiyan on Dec 15, 2010 2:07 PM
Maybe you are looking for
-
Can I install a program on an External Hard Drive?
I have an 500 GB external hard drive that I attach to my MBP to store movies and my aperture picture libraries. When I first got it, I created three Mac OS Extended (journaled) partitions, one for movies, one for pictures and the other one for "extra
-
When i start my Dispatcher i am getting the following error and it is in Yellow colour. Pls help me in this trc file: "dev_disp", trc level: 1, release: "700" sysno 01 sid BW7 systemid 560 (PC with Windows NT) relno 7000 patchlevel
-
Can we call sel scr in top of page
Hi all, Is it possible to call or to put selection screen in top of page in any report viz. classical or alv or ldb etc
-
Anyone sees this when you try to log in iTunes Connect? Apprently I am supposed to set up "reset password question", but there is something wrong about the system. Is it only me, or everybody seeing this?
-
I want to watch tv on my toshiba laptop. What kind of tv tuner do I get? Just a reg one or is there special ones for laptop?