Display Driver for TPC-2006 trying as per web soultion but not working

Hi friendz
Hope u all doing great. Actually we working on project for waste water treatment plant. Here its supplied with NI PAC and Touch panel 2006. Now the issue is in touch panel 2006 the displays are not clear and my client not happy with it.When i try yur web solution for Display Driver for TPC-2006 downloaded files are not running in touch panel, but for your information since i dont have card reader in my work bench computer i copied the file in different way dont know whether its correct r wrong. Steps i did was
- Downloaded files into my desktop computer first
- Then Inserted blank Compact Flash (CF) into touch panel.
- Through activesync synchronized flies between desktop and touch panel.
- Copied downloaded files into compact flash.
- Power off touch panel and power on no change.
If the steps gone through correct means why files not running any other solution. If wrong is there any other way coz i dont hv card reader rite now.
Pravin Jayapaul
Application Engineer

Pravin,
Did you get the following warning when you tried to activesync the files to your touchpanel?
That's the reason why you should transfer the files over with a card reader. Also, make sure your CF card is at least 256MB in size.
Message Edited by mishkin on 03-28-2009 01:55 PM
Misha
Attachments:
warning.png ‏4 KB

Similar Messages

Improved Display Driver for TPC-2006 Industrial Touch Panel Computer

Tried doing what it says in the link here, no joy on the installation part. Any ideas?
http://digital.ni.com/public.nsf/allkb/8483a1a765455acf862571cb005a7d44

Hi,
When you started up the TPC with the CompactFlash card in - did it recognise the file? I have done this today on a TPC - and on boot it says 'Reading XIP.NB0'.
Once it finishes I get a message saying I need to remove the CompactFlash and reboot? Have you seen any of this - or does it just boot in the normal way (as if the CF card wasn't there).
Did you copy the XIP.NB0 file across correctly, If you view it on the PC with a card reader does it appear? Is the CF card blank apart from this file?
Can you give me some more info about the process you've followed - this worked first time for me
Regards
Hannah
NIUK & Ireland

USB super drive for a MacPro retina. It recognizes CDs but not DVDs.

I bought a new USB super drive for a MacPro retina. It recognizes CDs but not DVDs. I am in region 1 and my DVDs are all region 1. This is the second drive so the problem seems to be in the computer. The problem is the same with battery power or AC adaptor. I downloaded Adobe flash before I bought the USD super drive. Could this be the problem? Any suggestions? Thanks.

MBP refers to Macbook Pro
Do the DVD spit out right away? (indicates a bad loader mech)
OR do the DVD spit out after several seconds (indicates a dirty laser diode lens) ?

HT201210 trying to download an instal ios 7 on my iphone 4s, after half an hour into the download it came up with a message saying failed and everytime i try again the download doesnt start. tried downloading from itunes aswel but not working. anyone know

trying to download an instal ios 7 on my iphone 4s, after half an hour into the download it came up with a message saying failed and everytime i try again the download doesnt start. tried downloading from itunes aswel but not working. anyone know why?

The servers are overloaded. There are a hundred million people all trying to download iOS 7 at one time. Try again later

ODS, Inventory cube, and WM- Trying to run a report but not working! Help

Hi Gurus,
Hope somebody can help me here....
I have an Inventory Cube and an ODS on Material Plant and another on Warehouse Management. For my reports I need fields from three of them so I created a Multi Provider by using these. But I have only Material and Plant as common in three of them, which is used in defining the Multi Provider. Along with these I have used some more characteristics which are not common. So now when I run a query on this MP, I am getting a display wherein the common characteristics get the values that are correct but for uncommon chars the values for the kfs from other data targets become blank and an additional row comes too.
For example, I have kfs like Blocked stock in the cube and in one of the ODS I have kfs like standard price. So, in the query for the char material group which comes from the ODS there are no values for Blocked stock, I mean I can see a row wherein there is a value for Blocked stock and a blank for Standard Price, in the additional row there is a blank for Blocked stock and a value for Standard price. This is the case with all the other kfs of different info providers.
Is it because they are not common in all the info providers? Is there anyway to solve this? RRI will not work as I need the KFs from both the info providers.
I am stuck now with this problem, so any guidence would be a BIG help.
Thanks

Is it because they are not common in all the info providers?
-->Yes
Is there anyway to solve this?
--> Yes and no. If there is a join condition between the ODSs that you can use to get the fields on the same row, you can do an infoset.
--> To achieve something like an outer join, you can create RKF for your base KFs, and restrict them on uncommon chars with 'constant selection'. This may not work in all cases. Search for a blog by Prakash Darzi on 'Constant selection' to understand this.
If logically there doesn't exist a relation (try to visualise how you will derive your output row if you were given these two in a file or spreadsheet - is there a logical link to connect the two sets of data?) you cannot expect the results that you look for.

TCS is configured as per the standards but not working

Hi Experts,
I have configured TCS as per the standdard Practice which assigned in the customer master record.
But not trggerring while doing FI Invoice.
Thanks Regards,
Dude

Hi Expert,
Check the below configuration steps:
1.    Define Withholding Tax key (206C)
2.    Define Withholding Tax type
3.    Create the access sequence for withholding for TCS in SD (Copy the existing access sequence J1AW and create the new access sequence)
4.    Create condition types corresponding to Tax collected at Source in SD
5.    Assign withholding tax types to SD condition types
6.    Define withholding tax codes
7.    Assign GL accounts for withholding tax types
8.    Add TCS conditions in pricing procedure (assign TCS conditions in pricing procedure as a statistical conditions)
9. We will need to define a new condition type and add this to the pricing procedure to post to the FI. This condition type will be manual and can be manually filled at the time of creation of sales order. This can also be copied from the statistical TCS condition types in the pricing procedure
Regards,
GK
SAP

I am getting total lockups and i am unable to use the app, tried all the usual options but not working still.

All my attempts at getting FCPX 10.1.1 working are failing. I was in mid-edit on a relatively simple job. I am completely locked up with the waiting rotator on continuously. Has anyone had this problem or can offer any advice. I am on a fully spec'd iMac and use a Thunderbolt 8TB drive. My iMac is working correctly with every other app.

There are almost infinite permutations to the type of media and your use of the Mac and FCP X that it is impossible for anyone to guess what you are doing wrong.
Please give detailed info of the media, the project specs and your workflow.

Trying to use string tokenizer but not working as expected

Hello friends,
In the following code, I am trying to acheive an output like this:
Manju Nambiar
Mini Nambiar
-variable mc stands for the maximum number characters allowed in a line.
-variable wb stands for wordbreak allowed i.e if set to false, a word should be printed as it is without splitting even if the maxchar limit is crossed, but then the next word should come on the next line.
String input = "Manju Nambiar Mini Nambiar";
String token;
String wb = "f";
String newlineop = System.getProperty("line.separator");
int mc = 10;
if(wb.equalsIgnoreCase("f"))
StringTokenizer splitip = new StringTokenizer(input," ");
while(splitip.hasMoreTokens())
token = splitip.nextToken();
System.out.println("length is:"+newlineop.length());
if((newlineop.length())<mc)
newlineop = newlineop.concat(token+" ");
else
newlineop = newlineop.concat(newline+token);
System.out.println(newlineop);
The output I am getting is:
Manju Nambiar
Mini
Nambiar
I know it is because of the length of the newlineop variable that I am checking in the loop - but I am not able to see how to circumvent this??? :-(
Please Help,
Thanks,
Manju

        String input = "Manju Nambiar Mini Nambiar";
        String token;
        boolean wb = false; // as Nasch pointed out, use boolean here
        String newlineop = System.getProperty("line.separator");
        int tokenLength = 0; // variable to check length of line
        int mc = 10;
        if (!wb)
            StringTokenizer splitip = new StringTokenizer(input, " ");
            while (splitip.hasMoreTokens())
                token = splitip.nextToken();
                if (tokenLength < mc)
                    tokenLength += token.length();
                    newlineop = newlineop.concat(token + " ");
                else
                    tokenLength = token.length(); //new line, reset length
                    newlineop = newlineop.concat("\n" + token + " ");
        System.out.println(newlineop);
    ram.

Help -- Trying to create JAR file but not working

Hi everyone
I have created a rather noddy Java program that consists of 4 JComboBox's and 1 JButton on a JFrame.
When the button is clicked a text file is generate with the options that have been selected.
There are severial files that the program uses for this:
gcc.java
OutToFile.java
gccConfirm.java
MyNewWindow.java
main.java
I am using Jcreator and so must use the command line to create the Jar file.
I have never done a jar file before so I did an example with a hello world program and got it working now problem. I did the same for this program and the JAR file is generated without error. I double click on the JAR file to run the application, but nothing happens. I can see the application running in memory but nothing loads on the screen. However if I run it from the command line using Java -jar gcc.jar then everything is ok.
can anyone help me here?
thanks in advance

If you run you .jar from the command line (a shell in unix speak) there
already is a console where your java program can send it's System.out
stuff. Right click on your .jar and select 'properties' (or similar). Note
that your .jar is run by 'javaw'. This executable is similar to the 'java'
executable except that it doesn't open a console for you. Change the
'javaw' command to 'java' and voila, there's your console again.
kind regards,
Jos

X300 display driver for XP

When will you update the X300 display driver for XP? Now we are still using the driver issue date is Jan, 08 (6.14.10.4860) too old, a lot of game are not be supported. Waiting for your reply. Thanks!
LB

Well, if you just find this version, I guess it is the newest one, Toshiba has released.
I'm not quite sure, what those alternative drivers were called, but I haven't meant the reference ones from NVIDIA itself.
I think it were laptopvideo2go, but haven't tried them. So use at own risk.
And what I meant, was, that the card is not too weak for running those games, but to have all settings on high. Ok, you have to excuse me, in this point I'm a bit of an enthusiast, wenn everything runs on that high detail level ;)

Old display driver for Satellite U920T-10J

Hi,
My display settings say: generic pnp monitor with a driver date of 2006. Updating the display settings does not change this.
What is the proper display driver for this laptop and how can i change it?

>My display settings say: generic pnp monitor with a driver date of 2006.
This is NOT graphic card driver.
The +generic pnp monitor+ entry appears within the Monitors section and the mentioned driver from 2006 is part of the Windows system and its common Microsoft driver which cannot be updated.
The _graphic card driver_ is listed within the section called Display adapters and this driver could be updated (if neccessary). So please dont mix both entries.

Cannot install latest display driver for Vista 32-bit Equium A200

Hi all,
I am trying to update my display driver to the latest revision posted for my model laptop on the Toshiba site but on running the setup exe Im returned with an error stating my system is not compatible with driver ver 7.14.10.1461.
In info clearly states it compatible with an A200 (PSAE2).
Anyone had a similar problem.

Hi!
On the Toshiba website I have founded only Intel display driver for your A200 PSAE2 so I think you have an Intel graphic card.
Well, I had this problem too and the solution is pretty easy: Go to the device manager => right click on graphic card => Update driver.
Now you can install the driver without problems.
Bye

Display driver for IBM Thinkpad T60 on Windows 7

Hi,
I've just installed windows 7 on my T60. It seems that the display driver (Intel GMA 950) is not behaving the way it used to behave in windows XP. I tried to install everything I could find on the support web site. They say that the support for display driver for T60 has been dropped for Windows Vista onwards. Is there any fix for this problem?
Any help is appreciated...
Thanks,
Harsh

The Win 7 is still in beta version, there is still no official support for it.... I don't think Intel will drop support for the GMA 950 GPU, as this way a lot of relatively new laptop will still be useless.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

How to install display driver for Satellite A running Win XP?

I recently got rid of Vista from my Satellite laptop and had XP installed.
I need to install the display driver (For ATI Radeon Video Card) which I had to download from this site.
How do I install the driver?
When I go to reinstall the driver the system can not find it.
What am I doing wrong or what do I need to run first?
There are so many files I am not sure..I tried running set-up but that did not help.
Thanks

you didn't show your model part, that's why I post all known me toshiba driver pages:
[European Toshiba Driver Page|http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp]
[Canadian Toshiba Driver Page|http://support.toshiba.ca/support/Download/ln_byModel.asp]
[Australian Toshiba Driver Page|http://www.mytoshiba.com.au/support]
[American Toshiba Driver Page|http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/home.jsp]
I can't believe that you can't install it give more details, pls

Missing windows 7 display driver for my Toshiba Satellite?

Hello everyone,
I've got a problem with the display driver of my laptop. Specifically, the display driver is stop working when I awaken the device from a sleep. I have tried to update the driver from Toshiba Australia but surprisingly I did not find the display driver for my model. So I tried to use the vista drivers but the problem still exist. Unfortunately ATI does not provide the drivers directly to Toshiba notebook instead they advice to go to Toshiba. Can any one advice me how fix this problem. My Toshiba specification details as follows:
Satellite Notebook
Series A300
Product: PSAG4A-02500M
Operating system Windows 7 64-bit.

There's a link on the Australian A300 driver page "unable to find W7 drivers - click here" (its in red, small and not obvious). Looks like you want to go here [http://support.toshiba-tie.co.jp/windows7/download/Satellite_A300_64_au.htm]

Display Driver for TPC-2006 trying as per web soultion but not working

Similar Messages

Maybe you are looking for