Display driver of geforce go 7200 @ window 7

Will HP release  the driver later...?
I can't found any driver of Geforce go 7200 for window 7...
 Thanks

look for official drivers at www.nvidia.com or www.laptopvideo2go.com - hp will release official 7 drivers when 7 is launched, and this also not for each device on each of their products.

Similar Messages

  • Where can i find display driver for satellite A200 PCAECE Windows XP 32-bit

    Where can i find display driver for satellite A200 PCAECE Windows XP 32-bit? Help!!!!

    hi there,
    Most of the A200 series makes use of this video card chipset.
    [Intel(R) Graphics Media Accelerator Drive X3100|http://askiris.toshiba.com/ToshibaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=1670 732xml&sliceId=&dialogID=57594450&stateId=1%200%20 57598302]
    Hope this will help :)

  • Satego X200 - XP Display Driver (Nvidia Geforce 8600M GT)

    Hi,
    finally I managed to install XP on my 2. HDD - beside Vista (in order to get rid of Vista later).
    What I still need is a suitable display driver, since Toshiba offers only one for ATI.
    I found many posts with similar topics in the www (laptopvideo2go, Nvidia, etc), but no suitable driver so far. Nvidia doesn't support Toshiba drivers directly.
    So I asked Toshiba for a solution and mentioned that a beta-driver might help as well since I don't need high grafic performance on this machine (no 3d stuff and I won't play games here) it should simply work ;-).
    They answered very quickly and provided a link to a not-signed _Satellite_ X200 driver. Unfortunately that driver leads to the same result (similar to: "Hardware not supported ...installation terminated").
    It would be great if anyone had an idea
    THX
    Kroever

    @jaba & @Horwath
    I asked Toshiba Germany again if and when they'll make an XP driver available. Their answer was quite clear - and disappointing: "they can't actually tell" :-(
    In the meantime I found a way to increase my grafic performance a little bit (while using the XP standard VGA driver) .
    I had the problem that i.e. shifting a single window took some time because it goes nearly line by line (not really but that's how it looked like).
    Therefore I reduced the hardware acceleration to "none" (don't know if this is the correct translation since I use a German MMI).
    This helps a little - I wonder how long, I guess 'til my son installs his next game ;-)
    I will follow your advice looking for 3rd party drivers but of course I'd still appreciate any further hint.
    Thanks so far
    Kroever

  • Windows 8 display driver for GeForce GT330M

    With the latest BootCamp (version 5) released, I was hoping that Apple will include a newer displayer driver (for Windows 8). But from the looks of things, they included adisplay driver from September of last year... and I found that this runs games like L. A. Noire at an unplayable frame rate (even at minimum settings). Now, before BootCamp 5 came out, I tried upgrading the display to one from December 2012, and found that the game ran butterly smooth; except that after a while, it started giving me BSOD (with a huge unhappy face!)
    Anybody know of any other drivers that could be used for GeForce GT330M (I have mid-2010 MacBook Pro...)
    Thanks,
    Tak
    P.S. I did find a helpful artcile from Ars (http://arstechnica.com/information-technology/2012/11/no-support-no-problem-inst alling-windows-8-on-a-mac-with-boot-camp/) and tried the driver there but the game still runs slow...

    I always ignore the graphic card driver that Apple provides with Boot Camp. That's because you can use the latest driver that NVIDIA provides for your graphic card without any problem. You can download the latest driver for the graphic card in this site > http://www.geforce.com
    It's important to keep the driver updated to get the maximum performance of the graphic card and to avoid problems in Windows

  • Display driver for Saphire to my Windows running on paralell

    Hi all
    I have a Ferrari 200 running on paralell on my macbok pro, trying to utilise the display properly has not been successful though. anyone who knows how.
    Svein

    For optical disc drive functionality you dont need to install some additional driver.
    Can you use your optical disc drive using usual DVDs and CDs?
    Can you maybe send screenshot of this message?
    As far as I know when you start upgrade (put upgrade disc in ODD) you should see THIS menu.

  • Problem with the Display Driver

    Hi.
    I just got this message when I started Adobe Photoshop today, that's the CS4 edition, about that there was a problem with the Display driver: "Photoshop have encountered a problem with the display driver, and has temporarily disabled GPU enhancements. Check the video card manufacturer's website for the latest software. GPU enhancements can be enabled in the Performance panel of Preferences"
    My problem is not what to do but how to do it. I went to System profiler and found something "ATI Radeon HD 2600 Pro, and: Chipset Model: ATI,RadeonHD2600".
    And so I want to ATI's website but can't find what I'm looking for.
    Any help?

    I have cs6 - master collection. I bought it on last december and i didn't upgrade it.
    "After Effects" works for some minutes and then it stucks and give the massege above
    "Display driver NVIDIA Windows kernel Mode Driveer, Version 334.89 stopped, responding and has succesfully recovered."
    and preimer works and suddenly the computer crashes not before giving the massege :
    "The NVIDIA OpenGL driver lost connection with the display driver due to exceeding the Windows Time-Out limit and is unable to continue.
    The aaplication must close.  error code: 7"
    I have new computer :
    proccesor   :Intel Core i7-4700MQ Haswell 2.4GHz
    Nvidia Geforce GT 740M
    Video NVIDIA® GeForce® GT 740M 2GB
    ram  8GB DDR3
    hard disk :  1TB 5400RPM + 8GB SSD Cache
    operating system :Windows 8 64 bit.

  • Macboook pro install win8 pro and display driver isssue

    Dear all,
    My macbook pro has installed windows 8 pro and currently has an issue with display driver NVIDIA GeForce 330M (Microsoft Coporation - wddm v1.20). After ugraded to this version (Microsoft Coporation - wddm v1.20) it seem that windows can not shutdown, I have to press the power button all the time.
    Any one can help please.
    Houng

    If this was working fine before that Windows Update pushed the driver down, just uninstall that driver update in Windows.  Or go into Device Manager and pick your video card and on the driver tab, click on Roll Back Driver.  It'll put the old version back on there that the Bootcamp driver disk loaded.  Of course, reloading that driver disk will also fix this in Windows.
    BTW, don't ever use Windows Update to update drivers for core system components.  Nothing but trouble about 65% of the time.

  • R400/T400/T500/W500: display driver "amdkmdap" crashes

    Executive summary: All current Lenovo ThinkPads with switchable graphics (R400, T400, T500, and W500) have usability issues in connection with Vista and the use of external monitors. For more than half a year, users were plagued by frequent Windows crashes. During that time frame, Lenovo did not comment on the various available reports and complaints. By the end of April 2009, Lenovo resolved many issues by releasing a new official driver. Though several problems, including severe ones, remain as of today. Lenovo has said to be actively working on the remaining issues (without outcomes so far).
    Important information for affected users: If you're having one of the issues reported here, then Lenovo advises you to call your local Lenovo Support. Demand that a case is submitted to hardware engineering. In particular, you should ask for "a CMVC case to be created and escalated". Using these "code words" ensures that your case is properly addressed.
    Old problem description
    On Vista 32 and Vista 64, the ATI display driver "amdkmdap" crashes when an external monitor was active before OR an application (game) using DirectX technology is used. The user typically receives a couple of so-called "Timeout Detection and Recovery" (TDR) messages from Vista:
    (Click here for an explanation of the message from Microsoft)
    Sometimes, amdkmdap crashes several times in a row. Then Windows crashes with a so-called "BSOD", likely resulting in data loss. Typically, Windows detects "atikmpag.sys" as the crashing driver. Sometimes, also an instantaneous reboot happens independent of prior TDR crashes. In such a case, no BSOD is displayed.
    The following movie illustrates the phenomenon: http://www.youtube.com/watch?v=LBX9QsCmrpY
    This behavior above has been confirmed for the following ThinkPad models: R400, T400, T500, and W500 (see below). Problem reports indicate that the symptoms are often related to playing games and/or the notebook being docked and the external monitor being connected via DVI.
    Though, the presence of these two conditions is not necessary to trigger the driver crash:
    There are reports where no dock was involved and the external monitor was connected directly to the notebook's VGA port.
    Furthermore, there are reports where the notebook was docked and an external monitor was connected to the DVI port.
    So far, there has been no report relating to a monitor being connected to the Display Port which is available on some models. (Possibly because this port is not used.)
    There are a few reports where neither a dock nor an external monitor was involved.
    Playing certain games reliably triggers the crash.
    Steps to reproduce
    While intially (around September 2008 - October 2008) the crash could be triggered easily, the situation is now (December 2008) more complex. The crashes do still occur, though there is no clear pattern anymore. According to various reports, the display driver crash can be triggered as follows:
    Resuming from standby
    Watching a DVD.
    Playing one of these games: Fallout 3, Bioshock, Team Fortress 2, Knights of the Old Republic.
    Arbitrarily during normal work. On a normal working day, the problem occurs at least once.
    Further issues
    Here are more issues which seem to be related. More information can be found in other posts of this thread:
    The notebook display and/or the external monitor runs at a low resolution after resuming from standby.
    After the login both monitors flicker while adjusting the resolution of the monitor.
    The external monitors cannot be activated using Presentation Director.
    The external monitor is blank after docking or undocking.
    There are some reports about display driver crashes on machines running Windows XP.
    The switchable graphics drivers limit the useable RAM under Vista 32 to 2.5GB (i.e. 500MB-1GB less than usual).
    Workarounds
    Lenovo has released a new "tip" document which provides a link to a new driver. Get it here but be sure to read the instructions!
    (Old tips follow below the line. Consider them as obsolete.)
    Here are some tips which might make the problem occur less often. I have not tried all of them. Though, A. and B. have improved the situation for me; your mileage may vary.
    A. If you do not have to use an external monitor, then switch to Intel graphics for time being.
    Otherwise:
    B. Make some changes to your system:
    Disable Aero.
    Create a new profile in the power manager with the following setting: When running on AC, turn off the monitor after 40 minutes. (Thereby, the notebook goes less often to standby.)
    Install the newest graphics drivers.
    Install the newest BIOS.
    Install the newest Hotkey utility.
    Install the newest drivers.
    C. Disable the switchable graphics in the BIOS setup and install modded drivers from ATI (see zilla's post in this thread for instructions).
    The last workaround (C.) has been confirmed to work reliably by several users. Though, thereby you use drivers which have not been tested by Lenovo. It's possible (but not very likely) that damage results by doing so. Also, it might be difficult to install a future Lenovo driver which resolves the issues reported here. Finally, you cannot use the power-saving Intel graphics. Thus, you should only use this workaround if you know what you are doing.
    The programs can be downloaded from the following locations. Notice that System Update does not always offer you immediately the lastest versions.
    R400 and T400 users: Go here.
    T500 and W500 users: Go here.
     User opinions
    "Is there any chance this will be fixed, or should I just get used to my "workstation-class" machine crashing regularly?"
    "I [am] thinking about to sell my w500 if this problems won't be fixed in the next weeks."
    "I've got a T400 w/ Vista 64 and I'll say the Switchable drivers on it S[**]K bad."
    "Unfortunately for Lenovo, our IT Manager is at the point of a awarding a new and rather substantial Enterprise Agreement for our whole organization's PC's, which included a rollout of many new PC's for 2009. The contract was going to go to Lenovo. He mumbled something about HP when I asked him about the state of affairs with my PC... [O]ur firm's IT Manager decided to return all the faulty Lenovo's for a refund and would replace them with HP's."  
    "Is someone from Lenovo paying attention[?]"
    "i'm getting angry with ati and lenovo."
    "there are no new drivers and no ETA for a fix."
    "ThinkPads are supposed to be good, so you'd think there wouldn't be a problem like this."
    "honestly it is completely unacceptable for lenovo to have done nothing this long. I paid extra to get the ATI card, and now I can't hook up my laptop to an external monitor without it crashing. I will probably end up selling the laptop soon since using an external monitor is extremely important to me and lenovo doesn't seem to care about fixing the situation."
    Update:
    - Lenovo support has informed me today (2008-10-24) that they are working on the problem.- changed subject (was: Major troubles with DVI-port and a T400) to reflect new information.- changed message body to reflect new information
    - See MIGR-70490 (dated 2008-09-21) for an official statement from Lenovo.
    - 2008-11-15: The problems are still present and there is still no ETA for a fix.
    - As expected, also R400 models are affected. See below for reports.
    - 2008-11-26: Still no word from Lenovo when the problem will be fixed. Added information on (partial) workarounds.
    - 2008-12-03: Lenovo updated MIGR-70490. Though, problems persist.
    - 2008-12-13: Updated problem description on the basis of new reports.
    - 2008-12-16: Updated problem description on the basis of new reports.
    - 2009-01-07: Updated problem description on the basis of new reports. Still no word from Lenovo. I called Lenovo's customer service in the Netherlands and was promised to receive a callback. Though, so far they didn't (want to) get back to me.
    - 2009-01-08: Updated workaround description on the basis of new reports.
    - 2009-01-10: Updated executive summary on the basis of new reports.
    - 2009-01-14: Updated problem description on the basis of new reports (movie).
    - 2009-01-19: Updated workaround section.
    - 2009-01-21: Happy birthday MIGR-70490! It's now 4 months. Updated workaround section. I called Lenovo's customer service in the Netherlands again.
    - 2009-01-22: Added section "User opinions"
    - 2009-01-23: Updated problem description on the basis of new reports.
    - 2009-01-24: Small updates.
    - 2009-02-02: Small updates.
    - 2009-02-03: Changes to section "Executive summary". Added section "Important information for affected users".
    - 2009-02-04: Update to section "Credits".
    - 2009-02-19: Update to section "Credits".
    - 2009-02-27: Quick update to "Executive summary" and "Workarounds".
    - 2009-03-10: Quick updates to section "Executive summary" and "Important information for affected users".
    - 2009-03-21: Quick update to "Executive summary"
    Credits
    Workaround "Aero off": Bubbi, TonyK
    Workaround "Modded ATI drivers": jtull89,  zilla
    Thanks to Mark_Lenovo and Confederate for their work behind the scenes 
    Thanks to feedback from: ajgiordano, Andy_7575, ben2e, brettgri, bri0831, Brimstar, Bubbi, CodeNameSly, cpueschner, dandill, diablo2man, ewilansky, gaccounts, gan, gandalf7, golffreaksi, Homer, hubertlam, Jiraiya, johnsonjf, jordan_moss, jmark, jtull89, kbarina, lenardg, lukest, misitmichaelf, mlb, MMetts, ojisan, pendaluent, Qot, rmccallen, sarnil, shaofengsd, Snakecharmed, StephanK, tarzan23, Texas1040, TheNewNumber2, TonyK, trickyDick, vedman, Vitalus, Waschbecken, xpnet, xrafx, zilla, ZPrime
     (Please don't expect that this list is complete. I am not paid to keep it accurate and complete and, actually, I have a life besides writing about Lenovo's problems. )
    Original post
    Hi there!
    I have major troubles using a Dell 2709W monitor with my T400. 
    The notebook is attached to a Advanced Mini Dock to which the monitor is connected via DVI.
     The problems are as follows.
    A. Activating the external monitor often fails
    Steps to reproduce:
    1. Attach a Dell 2709W via DVI to an Advanced Mini Dock which is connected to a T40
    2. Start Windows and make sure that the T400 is running on the ATI card.
    => Dell monitor enters power saving mode because no signal is coming.
    3. In Windows use either the Presentation Director, Windows, or the ATI tools to activate the Dell monitor.
    Expected result: The Dell monitor is activated and the Windows desktop is shown on it.
    Actual result: It takes 1-3 seconds for the Dell monitor to display something. The monitor shows the Windows desktop for a short period. Then it's black again and the monitor returns to the power saving mode .
    Analysis: It seems that the Presentation Director, Windows, or the ATI tools (or more aptly, I guess, the ATI driver) expect a quick response from the DVI-port that a monitor is present. If they do not receive the response, the DVI-port is deactivated again. Since the monitor is too slow to respond and enters the power saving mode too quickly, the monitor can hardly ever be activated.
    Suggested change: Change these tools (or the ATI driver) so that they wait longer for a response on the DVI-port.
    B. Resuming from monitor sleep causes Windows to fall back to a low resolution if the Dell monitor was activated before
    Steps to reproduce:
    1. Attach a Dell 2709W via DVI to an Advanced Mini Dock which is connected to a T400
    2. Start Windows and make sure that the T400 is running on the ATI card.
    3. Select the Energy Star profile
    4. Activate the Dell monitor
    5. Don't use Windows until the notebook display and the Dell monitor are set to sleep by Windows.
    6. Wake up the displays (e.g. by pressing some keys)
    Expected result: Both displays are run in the display mode as before.
    Actual result: The Dell monitor still sleeps. The notebook displays is run at a lower resolution (I guess 800x600). The Windows login prompt is not visible and it has to be guessed that it is shown. Though the typical Windows login background is visible. If the password is entered, then Windows can be used again. Though, the resolution is still low and the Dell monitor still sleeps.
    Analysis: It seems that by sending the Dell monitor to sleep, the monitor deactivates the DVI-interface or enters a low-power interface mode. This seems to disturb some component in Windows (the Presentation Director, Windows, the ATI tools, the ATI driver) in a way that Windows only activates the notebook display when it resumes from "monitor sleep".
    Suggested change: Change these tools (or the ATI driver) so that they can cope with the situation that the DVI-interface is deactivated and wait longer for the interface to be in a useable state. Reactivate an external monitor even if it "sleeps very deeply".
    Relevant system information
    - T400 2767-CTO (T9400, 2x2GB RAM, ATI, WXGA+ LED)
    - Advanced Mini Dock
    - Vista 32 Business (German) - fully updated
    - All Lenovo updates via System Update are installed- Dell 2709W
    - The system runs the ATI graphic card in the described scenarios
    Message Edited by Izmi on 05-21-2009 10:34 AM
    Message Edited by Izmi on 06-29-2009 03:13 PM
    Solved!
    Go to Solution.

    Lenovo support made me reinstall presentation director to rule out this component as a factor. After the reinstallation, the amdkmdap-problem is still present. Letting Windows go to standby and waking the system up afterwards, is a reliable method in my case to reproduce the problem on condition that an external monitor was active. The problem does not occur if no external monitor is present.
    A web search for "amdkmdap", "atikmpag","BSOD" with one of the ThinkPad-series names (like "T400") shows that other persons also have this problem with R400s, T400s, T500s, and W500s:
    - t400: Display driver crashes
    - W500 Display Driver
    - My W500
    - T400 Display driver stopped working...
    - T500 Video/Video Driver Issues (2056-4SU)
    - NUS T400 issues
    - T400 Display Driver Issue
    - Vista64 + 4GB RAM + External Display = BSOD
    - R400 problem report (in Chinese)
    - T500 problem report (in Chinese)
    - Bioshock keeps crashing (seems related)
    -  Vista x64, ATI graphics, dock + external LCD = bluescreens? (a report by a W500 user)
    - many problems with lenovo w500
    - another R400 problem report (in Chinese)
    -  Vista BSOD on Lenovo T500 with new Switchable Graphics
    - switchable graphics and external monitor through port replic
    - Problem with Lenovo T500 notebook & external LCD
    - Lenovo ThinkPad T400 - some impressions.
    - T400 freezes with graphics Intense programes
    - Standard Laptop mit ein paar Macken (in German)
    Some possibly related Non-Lenovo cases: 
    - Why Vista crashes so often when dual display is enabled?
    - Vista and 7.3 Display driver atikmdag stopped responding error
    - 4870 vista x64 multi-mon = atikdmag BOOM
    In the cases in which people observe the "amdkmdap"-problem and describe the circumstances, the use of an external monitor is always a factor. These other reports also indicate that it is likely not an issue with the hardware of my notebook (or then a general problem for many batches of these machine types). For it happens a) on many systems and b) on different kinds of systems.
    If others want to contribute to the problem solution, then we should provide Lenovo and ATI a good problem description. So, please add your description.
    Message Edited by Izmi on 02-03-2009 11:53 AM

  • Help! My display driver is no longer compatible with Adobe software!

    Help!  I rely on Adobe CC and my iMac to earn my living. My display driver is no longer compatible with Adobe software! What should I do? (most affordably because I dont have enough money for even basic living expenses right now.) Detailed notes are below but in a nutshell, I have a NVIDIA GeForce 8800 GS display driver. Adobe no longer supports it and disables the software functions depending on the graphics hardware. It recommends I check the manufacturer's website for the latest software. I did but only found firmware update for a different type of display driver for my early 2008 iMac. What should I do??! Please help me solve this!
    Note from Adobe:
    http://helpx.adobe.com/photoshop/kb/photoshop-cs6-gpu-faq1.html
    Adobe: “Note: AMD/ATI 1000, 2000, 3000, 4000 series, nVidia GeForce 7000, 8000, 9000, 100, 200, 300 series and Intel HD Graphics (First generation) cards/GPUs are no longer being tested and are not officially supported in Photoshop CC and CC 2014. Some GL functionality is available for these cards, but it's possible that newer features don't work.”
    I have an early 2008 iMac:
    Hardware Overview:
    Model Name: iMac
      Model Identifier: iMac8,1
      Processor Name: Intel Core 2 Duo
      Processor Speed: 3.06 GHz
      Number of Processors: 1
      Total Number of Cores: 2
      L2 Cache: 6 MB
      Memory: 4 GB
      Bus Speed: 1.07 GHz
      Boot ROM Version: IM81.00C1.B00
      SMC Version (system): 1.30f1
      Serial Number (system): YD*****N4
      Hardware UUID: D42002AC-A757-51C0-8D5D-333AD24D3DF9
    My display driver:
    NVIDIA GeForce 8800 GS:
      Chipset Model: NVIDIA GeForce 8800 GS
      Type: GPU
      Bus: PCIe
      PCIe Lane Width: x16
      VRAM (Total): 512 MB
      Vendor: NVIDIA (0x10de)
      Device ID: 0x0609
      Revision ID: 0x00a2
      ROM Revision: 3234
      Displays:
    iMac:
      Display Type: LCD
      Resolution: 1920 x 1200
      Pixel Depth: 32-Bit Color (ARGB8888)
      Main Display: Yes
      Mirror: Off
      Online: Yes
      Built-In: Yes
    Note from Adobe:
    http://helpx.adobe.com/photoshop/kb/photoshop-cs6-gpu-faq1.html
    Adobe: “Note: AMD/ATI 1000, 2000, 3000, 4000 series, nVidia GeForce 7000, 8000, 9000, 100, 200, 300 series and Intel HD Graphics (First generation) cards/GPUs are no longer being tested and are not officially supported in Photoshop CC and CC 2014. Some GL functionality is available for these cards, but it's possible that newer features don't work.”
    <edited by host>

    If you decide to use up to the minute applications, you will have to accept that the computer and operating system will eventually be incompatible with your chosen application as the features in the latest application rely on new hardware and operating systems to support them.
    Your options are to either use a newer Mac or use a version of Photoshop that will run on your Mac.

  • Premier Elements 12- Display driver error message

    Hi, I have just downloaded PE12 and have been unable to open the program. When I click on New Project, the following message appears, then it hangs up and wont open...."We have detected an incompatible display driver. To get a better and faster playback performance, please update your display driver".
    I am running Windows 7, 32 bit. I am sure that I have updated all the relevant windows drivers as per the Windows website and instructions. Still no help. Would appreciate any assistance and advice.
    Many thanks

    >updated all the relevant windows drivers as per the Windows
    Windows Update is NOT always accurate for device drivers
    -you need to go direct to the vendor web site and check updates for yourself
    ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
    nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
    After you can start the program, The Tutorial Links Page http://forums.adobe.com/thread/1275830 may also help
    Plus
    Premiere Elements FAQ List (2 pages of FAQ as of September 2013) http://forums.adobe.com/community/premiere_elements/premiere_elements_faq?view=all
    Premiere Elements TIPS List (6 pages of Tips as of September 2013) http://forums.adobe.com/community/premiere_elements/premiere_elements_tips?view=all

  • Cannot install Display Driver on Satellite L500D-14W

    Hey,
    I have a big problem with the Display Driver. I reinstalled the Windows now i cant install the Toshiba or any other modified driver. I cant use the old Display resolution 1366x768, only 1024x768.
    Windows Device Manager shows only Standard VGA Graphic Card
    I tried so many ways to fix this problem.

    Hi
    If you are using Win 7 then it should not be a big problem to get the right driver for this unit I installed Win 7 on my notebook and Win 7 was able to pick up the driver automatically.
    Go to device manager and select the graphic card. Now choose driver update and lets Win 7 searching for the driver automatically
    Usually this should work
    By the way: Toshiba European driver page provides Win XP and Win 7 drivers for this notebook model L500D PSLT6E

  • Can't install XP display driver on Satellite A200-27N

    Hi,
    i did install xp on my a200-27n, but when i try to install the dispaly diver http://support1.toshiba-tro.de/tedd-files2/0/display-20070809122620.zip, it give an message error that the ware is not validated for my computer
    pls i need help

    Have you read the installation instructions?
    You can find it also on the Toshiba website and list you should use as recommended installation order.
    Before you can install the display driver you must install:
    1 Windows XP
    2 Windows Updates
    3 Sun Java 2 Runtime Environment
    4 Intel ICH8M Chipset Utility
    5 Intel 965GM VGA Driver
    If you did do this and cant install the driver, install it manually. Go to the device manager => right click on the graphic card => update driver

  • Better Display Driver under Windows 8 than Windows 7 for MacBook Pro Retina?

    Anyone happen to know if the display support for a MacBook Pro Retina is better under Windows 8 than it is under Windows 7?
    Ideally, I would like to be able to run 2880x1800 at True Color as well as have the HDMI out fuction as a second display (maching the behaviour while booted under Max OS X 10.8).
    Under Windows 7, the highest resolution that supports True Color is 1600x1200.  This would be okay if that setting did not distort the picture (everything is slightly squeezed).  At 2880x1800, the highest color depth is High Color (16-bit) which is, well, not something one can actually use if doing graphics work.  On my 27" iMac, 2680x1600 supports True Color as expected.
    Also under Windows 7, the display connected via HDMI is not recognized.
    I've contected both Apple care support and Microsoft support about this, but Apple referred me to Microsoft and Microsoft referrred me back to Apple.
    Thanks,
    Warren
    P.S. Personally, I think it's rediculous to even attempt to do graphics work under Windows, but tell that to the Windwows based corporate world that I freelance in.

    Yes, there is a better display driver for the MacBook Pro Retina while running Windows 7 Pro.
    And, the answer is so obvious, that I feel a little silly having started this thread in the first place!
    The Windows 7 Professional NVIDIA drivers for the NVIDIA GeForce GT 650M card need to be installed manually by downloading them from NVIDIA directly.
    If you need to do this on your MBPr Boot Camp volume, use this link:
    http://www.nvidia.com/Download/index.aspx?lang=en-us
    Then, set the pop-up menus based on your MBPr. [Mine were as follows: GeForce; GeForce 600M Series (Notbooks); GeForce GT 650M; Windows 7 64-bit: English (US)]
    What tipped me off to this is that the CUDA drivers need to be downloaded manually on the Mac OS X side to take full advantage of raytracing in Adobe After Effects CS6 and CC.  As soon as I started to run that installer it dawned on me, "Hey, you probably need to install the drivers on the Boot Camp side as well."  And sure enough after doing so, I am able select all of the expected resolutions as well as run 2880 x 1800 at Millions of Colors (32-bit).
    I guess I'm showing my nearly three decades worth of being a Mac user where I'm accustomed to having about everything needed included with the OS.
    -Warren

  • "GPU enhancements/display driver" error with NVidia GeForce 8600 GTS

    I am currently evaluating a demo of Adobe Photoshop CS4 Extended. I am using a NVidia GeForce 8600 GTS video card. When I open the application, I get this error:
    Photoshop has encountered a problem with the display driver, and has temporarily disables GPU enhancements. Check the video card manufacturer's website for the latest software.
    GPU enhancements can be enabled in the Performance panel of Preferences.
    Here's the thing - the NVidia graphics driver I'm using is current! It's version 195.62. And here are the specifications of my video card (which is about a few years old).
    I am using Windows XP Home 32-bit SP3 with 2GB of DDR2 memory. Processor is AMD Athlon 64 X2 6000+.
    I've read over the functionality that this error message affects, and I'm not sure I understand it. If my video card is using its most current driver, what the heck am I to do? How badly will this handicap my Adobe Photoshop experience? (For reference, I plan on not doing that much using the 3D capabilities of Photoshop - but it may be interesting one day.)
    Also, one bug I'm experiencing is that the Layers window is present, but its contents don't appear unless I click on it.
    I'm not sure if I'm open to buying a new video card just to satisfy my Photoshop needs. Any help is much appreciated in overcoming this error and enabling FULLY-operational functionality of Photoshop CS4. Thanks!

    Here is a link that may help with old GPU's. Also ensure before you update the drivers that opengl is turned off otherwise PS will use the old drivers.
    http://kb2.adobe.com/cps/405/kb405064.html

  • Satellite M30 (PSM33C-00100E) - Display driver for Windows 7?

    I had no difficulty installing Windows 7 Home Premium on this computer. The only changes I had to make were installing the XP drivers for nVIDIA GeForce FX Go5200 and SD Host Controller.
    Granted I'm only getting performance level 1 due to my old video driver, but I'm still satisfied with my computer's performance using this operating system. Are there any Vista drivers for the nVIDIA GeForce Go5200 that will work on an M30?

    Hi
    I have a little bit searched using Google and I founded out that your model is listed on the Toshiba Canada website:
    http://www.toshiba.ca
    I have checked it and I can only find drivers for Windows XP It seems that your model supports only this OS.
    Is Windows XP not an option for you on this oldie? I think this would be better choice for this notebook.
    Otherwise you have to search on external websites for display drivers or you try a display driver from another notebook series Maybe it works.

Maybe you are looking for

  • External drive for iTunes library and backing up via time machine

    Hi, I currently have an 320gb external drive plugged into usb port of my imac for time machine back up, but my itunes library is 500gb and currently excluded from time machine back up, I would like to buy a 2 or 3tb external drive and then move my it

  • SAP_FI_AP_VENDOR_MASTER_DATA

    We require an authorisation / activity group to allow postings to one-time vendors ie. only allow a user with this access the ability to post to OTVs. Is there an authorisation object that allows postings to particular vendor master records or prefer

  • Ouput a string in a calculated column(Sqlscript)

    Hi there. I am having issues with something that appears to be really simple. I just want to add a calculated column in a projection and print a string in this row. Like the example below:                          var_sales = CE_PROJECTION(:var_in,  

  • First Impressions of iPad 2

    Just received my iPad 2 - WiFi, Black, 64GB. I upgraded from an iPad 1 (3G, Black, 64GB). First, I went for WiFi only this time around. I found that with my original iPad, I just didn't have the need for 3G. In my area, WiFi hotspots are plentiful. A

  • Reader 8.1.2 update

    Using Windows XP SP2. Have Acrobat 6 standard installed. Had Reader 8.1.1 installed Auto update tried to update to Reader 8.1.2- install failed. Tried deleting Reader 8.1.1 and then reinstalling 8.1.2 - installation failed with error message:- Error1