Display driver problem!

Im trying to open a .psd file and it wont let to open it..It says photoshop encoutnered a problem with the display driver and has disabled the GPU enhancements!
GPU enchancemnts can be enabled in the performance panel of prefences..
If the image opens some how, I get a pop up saying there is a problem photoshop cs4 needsto shut down ..sigh!
what should I do?

Is your video card on the list of cards tested by Adobe?
http://www.adobe.com/go/kb405711
It may not fulfil the system requirements for Photshop CS4.
This is from Adobe:
Photoshop CS4 leverages the graphics display card's GPU*, instead of the computer's main processor (the CPU) to speed its screen redraw. For Photoshop to access the GPU, your display card must contain a GPU that supports OpenGL and has enough RAM to support Photoshop functions--at least 128 MB of RAM--and a display driver that supports OpenGL 2.0 and Shader Model 3.0.
* GPU - Graphics Processing Unit. The computer chip on your graphics display card, that is optimized to display computer graphics to the screen.

Similar Messages

  • Aperture crashes when doing enhancements crashed at thread 35 which i think is a display driver problem any ideas folks

    Aperture keeps crashing every time I try and do some auto enhancements crash log comes up with crashed at thread 35 or 36 which seems to point to a display driver problem imac 2.16 intel core 2 duo 3gb ram os x 10.6.7.
    This is making aperture unusable I might go back to lightroom never had these problems with it.
    Graham

    Hi yes I'm running 3.1.2 I have tried 32 bit mode and it does just the same.
    Graham

  • I'm going nuts with display driver problems!!!!

    Hi everyone,
    I joined the forum some time ago but I can't get back in so I logged in with a new ID.(Pain)
    I have a problem that I hope someone can help with When I place any of my work or a photo into CS5-Ext. I can't do any work on it? No matter what tool other than the paint brush I use, as soon as I click on the picture / work it disappears and will only re-appear if I click on it again. I've tried all sorts and it's driving me nuts, Can anyone help?---PLEASE---
    Thanks.

    That sounds like a display driver problem.
    What OS are you running?
    If Windows, you can often visit the web site of the maker of your video card and download/install an updated driver.
    If OSX, you need to look to Apple and their OS updates to get updated display drivers.
    -Noel

  • Portege 3440 Display driver problems (2nd Screen)

    Hello to the complet comunity.
    I hope you will understand my post and will have not so big problems to understand it. I come from Germany.
    The Toshiba is a very wonderful Notebook. But since I have updated it from Win98Se too Windows 2000 I have a porblem with the display driver. I want to expand my desktop to an external display. This was no Problem under Win98Se. But with Win 2000 Sp3 I did not get it working. I have dry a lot of divernt drivers. Of course also the drivers from the support page. In the displayproperties I can choose S3DuoView, but it doesnt work. The internal and externel display with the same picture is no problem. But I want seperate pictures, for a example with PowerPoint or only to have more place on the desktop.
    Have somebody a woriking 3440 with Win2000 an two Displays.
    Temporaly the actuell version 5.12.01.7048 is "working".
    A new installation does not help. The same problem apears.
    Thank you for reading this long text.
    Greetings Spothuhn

    Hi
    I assume you want enable the extended desktop on your Portege.
    You have suggested that the 5.12.01.7048 graphic driver is working.
    On the Toshiba driver page I have found 2 different drivers for S3.
    One version is 7.31.26 and the other driver is 5.12.1.7009.
    I suggest that the 5.12 version is a little older. In this case try to install the 7.31 driver version. It would be very interesting to know if it will help.
    Which BIOS version did you have installed on the unit? The newest version is 1.6.
    Maybe the newest BIOS will help you.
    Bye

  • Display driver problem - Premiere Elements will not start

    Premiere Elements 10 will not run on my computer unless I downgrade to an old display driver. I would do this but it causes other problems.
    I am using the most recent driver from NVidia (but a pretty old display card).  I get this message: "We have detected an incompatible display driver... driver details: NVidia Geforce GTS 250/pCIe/SSE2 3.0.0"
    On Windows 7
    Can anybody help with this?

    Have you manually gone to the nVidia web site and downloaded the latest driver?
    http://www.nvidia.com/Download/index.aspx?lang=en-us
    This fixes about 95% of these types of issues.
    Also, you definitely do have a BadDriver.txt file on your computer. And you may need to delete it to clear this error.

  • Latest Windows 7 on latest Mac OS X via Boot Camp = display driver problems

    I've just done (with difficulty) a Windows 7 installation via Boot Camp on my hot new Mac Quad. But when I use Photoshop Elements for Windows-- the problem may occur with other Windows applications too but I haven't tried them yet-- I'm getting frequent blackouts and recoveries accompanied by the now slightly infuriating error message, "DISPLAY DRIVER STOPPED RESPONDING AND HAS RECOVERED. Display driver Radeon ATI family stopped responding and has successfully recovered."
    I'm also getting frequent spotty screens which suggest compatability problems. What gives? Are other people troubled by this? Seems to me that this is a problem crying out for an Apple software fix. But other people may have an answer now.

    Did you uppdate to bootcamp 3.1? To update to 3.1 you need to have installed 3.0 from your Snow Leopard install disc. What version of the display driver are you using.
    See this thread that just started too.
    http://discussions.apple.com/thread.jspa?threadID=2345677
    3.1 solved the "display stopped responding" for me. Of course that introduced other issues.
    Check your driver version and read here for other display issues fun...
    http://discussions.apple.com/thread.jspa?threadID=2328909
    http://discussions.apple.com/thread.jspa?threadID=2307311
    http://discussions.apple.com/thread.jspa?threadID=2315531

  • Downgrading T61 from Vista to XP Display Driver Problem

    Hi, We have recently downgraded a T61 laptop's OS from Windows Vista to Windows XP SP2 using the recovery CDs provided by the vendor. After the downgrade, all the factory default applications and drivers were installed properly, except for the video driver. I have downloaded and installed the available display driver from Lenovo web site (http://www-307.ibm.com/pc/support/site.wss/license.do?filename=mobiles/7ld150ww.exe) but whenever I try to install it, it gives me the following error message:  "This computer does not meet the minimum requirements for installing the software. Setup will now exit."  I am confident that our laptop meets the minimum requirements: It has 2GB RAM, 160GB HDD etc. Any idea how to solve this problem.  Many thanks in advance! - Cris 

    Cris, welcome to the forum,
    it would be helpful if you could post which T61 system you have, even better post the Type and Model Number this will help members to help you. If it ends in CTO please provide some details about it. Please do NOT post your s/n. 
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • Satelite Pro A200 ATI display driver problem

    Hello there,
    Have following problem: Can't install ATI software on my notebook. There is an error message during installation: "Catalyst Install Manager can't initialize Detection Manager".
    OS - Vista Business
    Display adapter - Mobility Radeon HD2600
    Any suggestions?

    Hi
    You could try to use another installation procedure;
    - Unzip the ATI graphic card driver package
    - access the device manager and choose the graphic card
    - choose update the driver and point to the palace where the display driver package was unzipped.
    This should help to renew and to reinstall the graphic driver.

  • Equium A60-155 display driver problem

    I have a problem with my laptop when I use a USB hard dive or run a CD/DVD my display driver crashes
    The display driver is the latest version (ati mobility radeon 7000 igp - 6.14.10.6430
    any ideas

    I had the same problem with my Equium A60-155.Over a period of months the situation got worse and the display driver was crashing every few hours. I tried updates and unistalling and reinstalling the driver without effect. After reading this form I downloaded a BIOS update (1.9b) and one week on the driver has not failed.

  • Satellite 2430-402, Display Driver Problem

    I have a Satellite 2450-201. Very often when the system comes back from Hibernate the system will not re-boot, it gets stuck after the opening logo. I have to shut it off and then then got to safe mode, and then restart. I get a message that the system has recovered from a device failure and it identifies the Nvidia Display Driver as the culprit. I have re-loaded the latest Driver from Toshiba, but if I try ANY update from Microsoft the Display goes crazy, and I have to go throught the re-boot and safe mode thing again. Any ideas on what the problem may be?

    Good evening ! I had this problem with my Satellite 2430-402. Ive updated the Bios and all was fine.
    Did you checked your Bios Version at first ?

  • Lenovo G 560 display driver problem

    The problem that I have: in 5 or 6 days my display goes black and after 2-3 seconds everything is OK again. When that happens I get a message from the system:" DISPLAY DRIVER STOPPED RESPONDING AND HAS RECOVERED"
    "Display driver NVIDIA Windows Kernel Mode Driver, Version 188.38 stopped responding and has successfully recovered."
    I tried with downloading and installing new,fresh drivers from Lenovo and the problem is still there!! Does anybody know what is the problem?
    Solved!
    Go to Solution.

    un-install drivers first, restart your computer and re-install graphic card drivers from here.
    by the way, have you installed any application or made any changes recently?

  • V570 Nvidia display driver problem

    Hi,
    I just bought a laptop Lenovo V570 with the serial nr.: 59-3157502y. When i try to instal the nvidia display driver i get the message: "This graphics driver could not find compatible graphics hardware".
    Please give a solution how to fix this problem. I had high expectations for this product....
    Tks

    In the drop down list you're picking Geforce 500 series, you should be picking Geforce 500M series (notebook)

  • T61 Display Driver Problem

    Starting today I have been having some rather severe problems with my laptop's display driver it seems. I am using Vista, and whenever I run my computer in normal mode every 10-15 seconds the screen freezes up, goes black, and then recovers telling me that the display driver has crashed and then recovered. These freezes continue at this rate for maybe a few minutes until the computer completely freezes up and can only be shut down by holding the power button. Currently I'm running in safe mode, and everything is going smoothly. Is this a hardware problem or a software problem, and is there anything I can do to fix it or does it need to be taken in for service?
    Thanks,
    Ethan

    Ethan1, welcome to the forum,
    if you have updated the system try rolling back to the original driver, this can be found in C:\SWTOOLS\DRIVERS\VIDEO if you have a factory installation. Otherwise go to this site and download the appropriate driver for your ThinkPad, it maybe you have received an unsuitable video driver through windows update, Lenovo drivers are adapted for the system and the windows update drivers are generic which can sometimes cause a problems.
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • T410: display driver problem // display does not turn on again after turned of by e.g. (fn+F3)

    Hello,
    I have a problem with my T410 (model: 25223FG)with Nvidia NVS 3100M  (driver version 8.17.12.5738  (27.06.2010) ) .
    The Fn+F3 Key-Command is configured to turn of the display.
    In almost 50% of the cases where I use the Key-Command (fn+F3), the display turns off but does not turn on again on mouse movement or key-press or touch-pad action. The faulty behaviour occures always when the T410 is connected to the AC adapter. And the chance of the display not turning on again seems to become higher with increase of the duration between Key-Command and mouse movement.
    In these test cases my energy manager configuration was set to not turn of anything, when connected to AC.
    If I configure it to turn of the display after some time I am experiencing the same problem.
    So my question is:
    Does anyone have a suggestion where to start? (display driver, bios,...)
    Regards
    Jonny

    Hello,
    I have a problem with my T410 (model: 25223FG)with Nvidia NVS 3100M  (driver version 8.17.12.5738  (27.06.2010) ) .
    The Fn+F3 Key-Command is configured to turn of the display.
    In almost 50% of the cases where I use the Key-Command (fn+F3), the display turns off but does not turn on again on mouse movement or key-press or touch-pad action. The faulty behaviour occures always when the T410 is connected to the AC adapter. And the chance of the display not turning on again seems to become higher with increase of the duration between Key-Command and mouse movement.
    In these test cases my energy manager configuration was set to not turn of anything, when connected to AC.
    If I configure it to turn of the display after some time I am experiencing the same problem.
    So my question is:
    Does anyone have a suggestion where to start? (display driver, bios,...)
    Regards
    Jonny

  • Is there a good fix for iTunes crashing on start up on the itunes store for Windows 8.1 tried the ones on here bust still get display driver problems

    I recently purchased a new PC and it came with Windows 8.1 and tried to install itunes as i had it installed on windows Vista and XP but for some reason now on windows 8.1 every time I open itunes is takes me to the take a tour page of the new itunes and when i try to go to the itunes store it allows me to brows for like 30 seconds before i get the Error Display Driver.

    What is your exact brand/model graphics adapter (ATI or nVidia or ???)
    What is your exact graphics adapter driver version?
    Have you gone to the vendor web site to check for a newer driver?
    For Windows, do NOT rely on Windows Update to have current driver information
    -you need to go direct to the vendor web site and check updates for yourself
    ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
    nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
    Do you have dual graphics adapters?
    Go to the Windows Control Panel and select Hardware and Sound and then select Device Manager... In Device manager you click the + sign to the left of Display Adapters... and see if 2 are listed
    IF YES, read below
    -http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
    -http://forums.adobe.com/thread/1001579
    -Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
    -link to why http://forums.adobe.com/message/4685328
    -http://www.anandtech.com/show/4839/mobile-gpu-faceoff-amd-dynamic-switchable-graphics-vs-n vidia-optimus-technology/2

Maybe you are looking for

  • Loud fan and hot macbook

    Hi Just in the last week or so I've noticed my Macbook gets really warm after about half an hour or so and the fan (I think) gets really loud. I'm not normally running much maybe itunes and safari and thats it. Does anyone know what the problem might

  • Purchase requisition created through plant maintenance order

    Hi Dear Experts, Is there report where  i can see purchase requsitions (thats are created from PM order) with PM order number? Regards, Aktolga

  • Function Module 'Save_text' in update task of Vl01n

    Hi Friends, My requirement is, when i save a delivery document, the 'Material Sales text' in delivery has to be updated with custom details. It is good that we can code the function module 'Save_text' in update task in the exit provided for VL01n - D

  • Accounts receivable in PA reporting

    Hello everyone, I am trying to bring account receivable as one of the key figurs in PA reporting. Is there a keyfigure already defined in SAP or do I need to create one? Also can anyone tell me how do I multiply the currency convertor for a specific

  • Consolidation....Urgent Please.......

    Hi Experts, We have 3 co.codes within india. each one is seperate legal entity and prepare seperate B/S and P & L a/c. here my question is..... How to consolidate these 3 co.codes and finally gets only one B/S & P&L ? How...Pl explain me...? i will a