Display driver recovery error for Compaq notebook

I have a compaq notebook - CQ60)-211DX , P/N NBO49UA originally with Windows Vista. I've sinced upgraded to Windows 7, 32 bit. I'm needing to find the right Display driver to upload. I'm getting display recovery errors. I've tried windows fix it and I also tried to extend the registry timer but didn't know which registry to open and save.

Hello Ervinredeye50,
I understand you are looking for an updated display driver, is that correct? I will be happy to help you.
From what shows currently available on the HP.com, site this driver is the most recent one available. I am not sure which one you currently have installed but this the most recent one that HP has released for your make and model.
Please respond back at your earliest convenience.
Thanks
Clicking the White Kudos star on the left is a way to say Thanks!
Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

Similar Messages

Where can i get driver recovery disk for hp 15-d000sia notebook pc.

I bought this pc last two weeks and i have many problems with the drivers and software. I tried downloadig them from hp support assistance but seems that they are not compatible. Your assistance will be highly appreciated.

Kaivilu wrote:
Okay. But i mean i bought this pc without the opoerating system tried to download drivers but many of them are not compatible. Could you please send me the link of the correct driver and software for my pc.
OK.
That depends on the operating system you have installed and the CPU\chipset your notebook has. To install the proper drivers, you will have to identify the devices that the notebook has on your own.. I certainly can't do that from afar. That is the downside of buying a notebook without an operating system. You will have to do the legwork, but we will try to guide you.
This spec sheet shows the base items but does not identify them by brand and model. How to identify unknown devices in a Windows 7 notebook.
The drivers for Windows 8.1 & 7 (64-bit only) are located at the following HP suport portal for your notebook.
http://support.hp.com/us-en/product/HP-15-Notebook-PC-series/6529963/model/6786374/drivers
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Vista Display Driver setup error on Satellite A200 19L

After visit this link, I've finally downloaded the driver setup for my notebook! But when it run to install, I got an error message : "The nVIDIA setup program could not locate any drivers that are compatible with your current hardware.Setup will now exit." and cant install the driver...
Then I manage to install the same model's driver for Windows XP!It's ok without Aero and Fn key...In Display Properties it show that it's nVIDIA GeForve Go 7300 but still havent Aero nor Fn key!So what's wrong???
I install Vista Ultimate in English!
Check please this link
SOMEONE PLS HELP ME...

It's dead link! Try this: http://cdgenp01.csd.toshiba.com/content/support/downloads/driver_video_nvidia_25754A.exe
Its original driver from american web site of toshiba.

How to create recovery discs for HP notebook with preinstalled Windows ?

I Have just bought the HP ProBook 4530s with preinstalled Windows 7 Home Premium 64bit.
The notebook was purchased in the hipermarket so that it has no Windows installation discs.
There is a Windows 7 label sticked to the machine.
When I try to use standard Windows 7 procedure:
Start > Control Panel > Backup Your Computer > Create a system repair disc
it shows the error:
System Repair disc could not be created
the parameter is incorrect 0x80070057
How to create system recovery discs ?
BR
Sylwek

Hi BH,
I have read the link you suggested and tried to find HP Recovery Manager at my notebook.
1) I typed Start > Search > "Recovery" but it was not installed.
2) I ran the HP Software Setup to check recommended and optional HP applications. HP Recovery Manager was not there.
3) I downloaded HP Recovery Manager for Windows 7 and ran the installation
I accepted the default folder.
C:\SWSetup\sp45415
It showed an installation form for a while and then completed with no message.
4) I repeated action (1) but no HP Recovery Manager.
5) I checked uninstall menu but no HP Recovery Manager.
Please let me know what to do next ?
BR
Sylwek

Monitor Is Flickering - ATI Display Driver Problem Error Message

Hello, for the last few weeks, I have been having a monitor issue. Everytime I turn my computer and monitor on, it is flickering like crazy on my HP 2509B Desktop Monitor, and on the right bottom corner a flag shows up with ATI Display driver, and I am trying to figure out how to repair this monitor issue. I don't know if it is coming from the Monitor itself or its coming from the Mother Board TOWER, I am going crazy with this and its hurting my eyes everytime I turn it.
Sometimes the flickering would just go off by itself, and now its doing it constantly. I don't know what to do with this.
I love my monitor and I hate to see to replace it or something. Please help me with this. I hope it is not a driver hardware issue.
I would greatly appreciate all the help I can get to do this myself if not then I am going to have to take to the store I bought it from and get them to help me out, but I want to do this on my own. If you can help. Thanks

if you have another monitor you can test it to see if if does the same thing and also check the cable and maybe use a different one to see if the cable is not the cause which i doubt
Please provide Kudos to whom has provided answers or
good points or advice..
Aslo if the questions or issues solved please check it
"Accepted"
Thanks and you are welcome _____ Rick

Recovery options for U460 notebook?

I recently got myself a U460 notebook. I didn't even notice it was missing an optical drive - my fault, I missed it in the display unit.
Anyway, in the event of a HDD crash 2-3 years down the road, what kind of recovery options do I have? Can I:
Boot from a USB connected external CD drive?
Perform One Key recovery even with a new HDD?
Others?
I hope NOT to bring it back to the SC....

see the page 54/143 or page 40.
user manual

How do i make a recovery disc for compaq nc 6400

Just recovering from a major crash and learned my leason about not having a clean recovery disc. How do i make one that will have all my correct drivers and be able to do complete reboot if needed again?
I have a compaq nc 6400 using (for now) Windows xp perf.
Thanks

Read the following HP document. There is a description of how to create a recovery disk set. It is unlikely that after all this time you can make a set.
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/setupInstallDisplay/?sp4ts.oid=1...
I did a search online for NC6400 recovery disk set and it appears that aftermarket vendors can probably help you.
Try the following vendor
http://www.computersurgeons.com/
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Recovery Windows for notebook is not working

Dears
I recieved the Recovery Windows for my notebook, but unfortunitly it is useless. I put Disk 1 then asks for Disk 2 them when it try to finish it stops from %12 I have been waiting verry long time but still no progroress. I did same procedure and same thing hapeen. I dont understand HP only care about his money and has sent me useless Disks . I paid nearly 33£ as well as I lost every thing in my laptop that I trusted the recovery CD. I'm writing to you I will send back these useless Disks and HP must refund every thing what I spent
Dashti

Hello dashti,
Call in to HP and speak to a rep about this.
If you live in the US, contact HP Here.
If you are in another part of the world, start Here.
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

System Recovery Kit for dv7-3165dx fails to restore factory image to replacement hd

I'm posting this wall of text here in case someone else has any suggestions before I contact HP Support to see what options they have.
My attempt to recover the factory image to a replacement hard drive in an HP Pavilion dv7-3165dx notebook is failing. An error occurs when SM.exe is trying to merge the WIM files. The SSRD.Log shows an error:
SM, 13, Set reference file fail
after that, SM.exe displays this message when run from a command line:
SM, Failure, Can not load imagex 1 from src WIM file
The following are the symptoms that the Recovery Manager displays on the screen.
The Recovery Manager reads the two DVDs and after a few seconds, it pops up an error message:
Reducer
C:\RM\Image\TempBASE.WIM was not found.
The message has on "OK" button that when clicked on, closes the message window.
After that, nothing happens. No disk or DVD activity for over an hour. The mouse moves, but no key presses have any effect, including CTRL-ALT-DEL. You can use the mouse to move the Recovery Manager window around, and there is nothing hidden behind it. Clicking on the Recovery Manager Back, Next, or Cancel buttons produce no response at all.
The only option at this point is to hold down the power switch until it powers down.
When the power is turned back on, the hard drive boots and Recovery Manager displays a message that incorrectly claims "Recovery is complete" and has a "Click Finish to restart" button. After clicking on "Finish", it reboots but since the System Recovery did not actually complete, all it does is display:
BOOTMGR is missing
Press CTRL+ALT+DEL to restart
Before attempting the recovery, the notebook passed all diagnostic tests.
The 2x2GB memory cards, which still have HP stickers on them, were tested with Memtest86+ V5.01 and completed over six passes in over seven hours with zero errors.
The replacement 500GB HGST Travelstar Z5K500 drive was tested with gsmartcontrol. The SMART status showed no errors in the past with over 400 hours of power-on time. Both of the SMART short self-test and extended self-test tests were run, which it passed without any errors.
The HP System Diagnostics from the Startup Menu were run on the memory and hard drive and they passed those tests without any errors.
While waiting for the HP "System Recovery Kit for Consumer Notebook (3 Disks)" Software Part Number 599357-001 to arrive, both Fedora 21 64bit and Windows Vista 64bit were successfully installed on the harddrive.
Both System Recovery DVDs were read on different machines without any errors. This System Recovery Kit supports the notebook's System Id which is 3638, so they appear to be the correct discs.
Now a list of workaround attempts that were suggested.
After the Recovery Manager failed a few times with the same error message, some googling came up with other users mentioning the "TempBASE.WIM was not found" error message. I tried these suggestions that I read about.
Run KillDisk to fill the HD with zeros.
Running Recovery Manager after that failed with the same error message.
Run the CyberLink Recovery Discs Utility (sp44645.exe).
Running Recovery Manager after that failed with the same error message.
Installed Windows VISTA 64bit again and upgraded the BIOS from F10 to F13.
Running Recovery Manager after that failed with the same error message.
Try only using a single 2GB memory card to see if it was a 64bit problem.
Running Recovery Manager after that failed with the same error message.
The BIOS does not have an option to change from AHCI mode to IDE mode.
I don't have a Windows 7 OEM install disc and am trying to avoid spending $100 to buy one.
That is when I decided that it is not a PC hardware problem, but a problem with the HP System Recovery Kit. Here are the details of what I think the Kit is doing.
After running Recovery Manager and getting the error message, instead of just re-booting and letting the "Recovery is complete" message appear, I re-booted with a Linux USB drive and inspected what was on the hard drive.
fdisk -l shows this:
Disk /dev/sda: 465.8 GiB, 500107862016 bytes, 976773168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Disk identifier: 0xa5dddc41
Device Boot Start End Sectors Size Id Type
/dev/sda1 409600 143013887 142604288 68G 7 HPFS/NTFS/exFAT
/dev/sda2 * 143013888 143833087 819200 400M c W95 FAT32 (LBA)
fsarchiver probe shows this:
[======DISK=] [=============NAME====] [====SIZE==] [MAJ] [MIN]
[sda ] [HGST HTS545050A7    ] [ 465.76 GB] [ 8] [ 0]
[=====DEVICE] [==FILESYS==] [=====LABEL=] [====SIZE==] [MAJ] [MIN]
[sda1 ] [ntfs    ] [<unknown>    ] [    68.00 GB] [    8] [     1]
[sda2                 ] [vfat    ] [SDV ] [ 400.00 MB] [   8] [ 2]
Running gparted shows about 200 MB of unallocated space before the sda1 NTFS partition. The rest of the disk is unallocated after the bootable sda2.
The sda1 NTFS partition has a \SSRD.Log file and an empty \RM\Image directory.
The sda2 FAT32 partition has the Recovery Manager application files in it:
/mnt/sda2:
total 400
-rwxr-xr-x 1 root root 15 Apr 9 23:36 SDV.FLG
drwxr-xr-x 4 root root 4096 Apr 9 23:36 SYSTEM.SAV
drwxr-xr-x 3 root root 4096 Nov 1 2009 BOOT
drwxr-xr-x 3 root root 4096 Nov 1 2009 EFI
drwxr-xr-x 2 root root 4096 Nov 1 2009 SOURCES
drwxr-xr-x 3 root root 4096 Jul 27 2009 TOOL
-rwxr-xr-x 1 root root 383562 Jul 13 2009 bootmgr
The SOURCES directory has boot.wim, and the TOOL directory has all the programs, like Reducer.exe and SM.exe, in it.
After shutting down the Linux system and rebooting, the Recovery Manager then boots from sda2 and displays the "Recovery is complete" message and "Click Finish to restart" button. During this process, it removes the sda2 partition and marks the sda1 NTFS partition as the active bootable partition. When the PC restarts, all that is left is the sda1 NTFS partition with the empty C:\RM\Image directory and the SSRD.Log file, so there is no BOOTMGR to boot with.
The SSRD.Log file logs the tasks that the Recovery Manager performs.
The Recovery Manager runs some initialization tasks and then reads the two System Recovery DVDs. It then calls MergeWimFile which runs SM.exe and starts to merge BASE.WIM with the other BASE*.WIM files. SM.exe merges 20 WIM files with log entries like these:
SM, Success, refName= C:\RM\IMAGE\BASE22.WIM
SM, Success, refName= C:\RM\IMAGE\BASE23.WIM
SM, Success, refName= C:\RM\IMAGE\BASE3.WIM
SM, Success, refName= C:\RM\IMAGE\BASE4.WIM
SM, Success, refName= C:\RM\IMAGE\BASE5.WIM
SM, Success, refName= C:\RM\IMAGE\BASE6.WIM
SM, Success, refName= C:\RM\IMAGE\BASE7.WIM
Then, with only two WIM files left, BASE8.WIM and BASE9.WIM, the log shows:
SM, 13, Set reference file fail
This must be when Recovery Manager pops up the "Reducer C:\RM\Image\TempBASE.WIM was not found" error message.
That narrowed down the problem.
I copied all of the WIM files and the TOOLS directory to a Windows 8.1 system. The two DVDs did not have any errors while being read. Running SM.exe from an admin Command Prompt with the same parameters that were logged in the SSRD.Log produced the same error message. There was an additional error message that appeared in the Command Prompt window:
SM, 13, Set reference file fail
SM, Failure, Can not load imagex 1 from src WIM file
and the TempBASE.WIM was not created.
SM.exe /? did not provide a help message. I could not find any documentation on the SM.exe command.
If I removed three of the WIM files, (BASE7.WIM BASE8.WIM BASE9.WIM) then SM.exe could create the TempBASE.WIM file, but it would fail while merging index 2 of 3 with this message:
SM, 11%, Merge index 2 of 3 Processing
SM, Failed, Export image failed
The TempBASE.WIM is 3,421,518 KB in size after that.
This is where I came to a dead end and cannot think of anything else that I can do. Maybe I'm missing something obvious, but it appears to me that there was some kind of error building this System Recovery Kit and it is not able to perform a factory install on this notebook.
ps
If I can figure out how to add an attachment, I will add the SSRD.Log file. If not, then ask and I will post it as a followup.

Downloaded Windows Assessment and Deployment Kit which contains the latest imagex program.
Running imagex.exe on the BASE7.WIM file on the second System Recovery DVD:
imagex.exe /info K:\PRELOAD\BASE7.WIM
ImageX Tool for Windows
Version: 6.2.9200.16384
Error opening file [K:\PRELOAD\BASE7.WIM].
The data is invalid.
The same error message is shown for BASE7.WIM, BASE8.WIM, and BASE9.WIM.
The other WIM files in the PRELOAD directory, BASE5.WIM, BASE6.WIM, BASE10.WIM, BASE13.WIM, BASE15.WIM, BASE17.WIM and BASE23.WIM, could be read by imagex without any errors.

How can I download or buy recovery disk for my hp pavilion dv2500s/n 2CE727216L

product name and number : hp pavilion dv2500s/n 2CE727216L
operating system windows vista
my wife try to repare a small problem
she format all the hard disk including recovery partition

You can call HP @ 1-800-474-6836 and order a set of recovery media for your notebook. Make sure to include the HP Product Number (P/N) for your notebook.

Satellite Pro M30, Is it recommended to install the new display driver from nVIDIA?

I own a Satellite Pro M30 notebook, which includes a GeForce FX Go5200 GPU made by nVIDIA. On July 27, nVIDIA released a new driver and related software (version 61.77) which, as stated by nVIDIA, fits all its GPUs.
I tried to install this new driver on my notebook (after removing the old driver as instructed by nVIDIA) but it does not install. Does somebody have any idea why?
Why isn't the new driver posted on Toshiba's driver support site for this notebook?

Hi
All drivers are designed and tested for the notebooks and Tom is right about depending on notebook producer. That means that you can find all necessary drivers on Toshiba download page.
As far as I know Toshiba supports the drivers delivered with the unit and updates drivers if needed.

Order for recovery disk for windows 8-64bit

Hello..i bought my note book before 3 months..
The model no is D1C14UA/g6 and i have windows 8 64bit os..before some days i had a problem in usb device so i gave it to solve in hp care and they changed modem so they reset it fully..and problem is that i dont have recovery disk so they havent give me solution for that..they told that you have to order from hp car by online..so i want to get recovery disk for my notebook..

Hi: Please click on the link below, and then click on the line labeled Order Recovery Media. http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4132&lc=en&cc=us&dlc=en&sw_lang=&product=5363785

Photoshop CC 2014 for Mac Error With Display Driver

I keep receiving this error and then Photoshop crashes. Has anyone encountered this issue and if so how did you resolve it? I am using a Targus docking station and I had to download this driver: Driver Name: Video, Audio, and Ethernet Software for Mac OS X Yosemite 10.10, Mavericks 10.9, Mountain Lion 10.8/10.7 (R2.3) – January 2015
As long as this driver is installed on my mac pro, Photoshop continues to crash. If I uninstall the driver, Photoshop works fine.
Error Message:
Photoshop CC 2014 for Mac has encountered a problem with the display driver, and has temporarity disablesd enhancements which use the graphics hardware. Check the manufacturer’s website for the latest software. Graphics hardware enhancements can be enabled in the performance panel of preferences.
for more information, visit:
http://www.adobe.com/go/photoshop apu cc en

VHail wrote:
…All drivers and programs are up to date.
You need to update your video driver from the website of the manufacturer of your video card. You cannot rely on Windows Update or Microsoft, which typically have outdated drivers.

I am getting an error encountered problem with the display driver for my Photoshop CS5 extended

I have Windows 7 and have used CS5 extended with no problems for quite a while now.
Last week I started up CS5 and received the error:
"Photoshop has encountered a problem with the display driver and has temporarily disabled GPU enhancements. Check the video card manufacturers website for the latest software. GPU enhancements can be enabled in the Performance panel of Preferences."
"Please close program and uninstall and re-install if problem persists"
I was able to edit, however when I went to save my work it would not do so. The following error came up.
"Could not complete the command because the extension could not be loaded"
"Could not save a copy as .....because of a program error"
I checked to make sure I have the latest driver, I also uninstalled and re-installed the program and I am still getting the errors.
Can anyone help with this?

Error 1402 | Error 1406 | Acrobat, Reader

Audio Driver for Compaq Presario C700 Notebook

Hi,
I have a " Compaq Presario C700" notebook.
Recently i have formatted it and after that Audio feature is not working.
I assume i need to install audio driver for the same.
Please tell me from where i can download the driver?
Also tell me the location to download bluetooth driver download.
Thanks in advance,
Ritesh A.

Please make sure MS-UAA has been installed properly
How?
Go to Device Manager under System Devices to see if MS UAA installed properly.
There should be a listing for Microsoft UAA Bus Driver for High Definition Audio.
If not, you should have a PCI with yellow!
Right click it and Update Driver,
No to Connect, No to Search and last Install Automatically.
Use driver below and if it fail try to force install it
Conexant High-Definition SmartAudio 221 Driver (C700 series, Vx5xx and dvx5xx and ABOVE models)
Driver modded by silver here
Unzip to a folder..use Device Manager,right click "Audio Device on HD",choose Update driver,
No to connect, Install from a list or specific location,
Select Don't Search, I will choose the driver to install,
For the Hardware Type select 'Show All Devices'
Remove the check from "Show Compatible Hardware" and click on "Have Disk".
Next...browse to the unzipped folder and choose the "WiSVHe5.inf".
Ignore XP when it complains, Reboot.
Pavilion DV2922TX, XP-SP3 32bit, Intel T5750 2.0Ghz, Nvidia Geforce 8400M GS with 128MB, 4GB 667 DDR2, 250GB HDD

Display driver recovery error for Compaq notebook

Similar Messages

Maybe you are looking for