"Display driver stopped responding and has recovered" error

Hi, I recently upgraded my laptop to Windows 8.1 and now from time to time, I am receiving the error above on the right side of the screen and my photoshop files won't open. Instead it just freezes and becomes unresponsive so I have to close Photoshop from going to 'End Task'. I don't know whether it was the Windows upgrade that caused this because it has never happened before. Is there any way to fix this issue because I am not even able to use the program. By the way, I am using CS6.

I have two different ones:  Intel  (the one that's causing the problem) and NVIDIA. However when I tried uninstalling and deleting the Intel, I noticed it was back in the 'Display Adapters'. I never had this problem until now.

Similar Messages

  • SLI GTX 970 Nvlddmkm "Display driver stopped responding and has recovered" Error

    Hi everyone,
    I'm having an issue with driver crashes and was hoping someone on here would be able to help. The error I am getting is: Nvlddmkm "Display driver stopped responding and has recovered".
    My PC specs are:
    Windows 8.1 Pro
    i7 4770k with Corsair H100i
    2x 8GB HyperX RAM
    Asus Maximus VII Ranger Mobo
    2x MSI GTX 970's
    750w Superflower Leadex PSU
    I've noticed that the error usually happens while the cards are cooling down after playing a game, although it has been known to occasionally happen while gaming. I am have MSI Afterburner running and have noticed that the GPU usage spikes up to 100% then the power usage drops completely just before the crash.
    This problem has persisted through 3 clean OS installs so I do not believe it is a driver issue.
    My initial thoughts were that the PSU could be insufficient, but after some reading online my system really shouldn't draw anywhere near 750w. What do you think? I am not totally clued up on PSU's, so not sure if my wiring could also be causing the issue - here's a pic:
    The cards use a single cable that joins both cards for both 8-pins, then two other power cables for the 6-pin. Would this be a problem?
    It's also worth noting that the issue doesn't seem to occur when SLI is disabled. I never had any problems with the original card prior to adding a second card though so I do not think it needs RMA'ing.
    Any advice would be greatly appreciate. Thanks in advance.

    Quote from: Svet on 08-June-15, 17:36:36
    oki remove the second card[your old one] and test the newest card only
    I will try this tomorrow, thanks.
    A bit more info, it crashes with SLI disabled. Just found out tonight for definite.
    Here is a screenshot of what MSI Afterburner shows when it crashes.

  • Msi GT683R "Display driver stopped responding and has recovered" error.

    I bought a laptop before 6 months, installd windows 7 x64 and everything works fine. Suddenly, five days before I got this eror " Display driver stopped responding and has recovered ... "but the laptop operates normally, when not connected to the charger, the only difference is that the graphics card works only on P8 state 203/606/324. I've tried everything, install new windows, tried all the video drivers back 6 version, tried two different chargers, raised the voltage in the video card, flash the latest BIOS, flash latest EC driver, changed several types of RAM memory, installed win xp x64, all drivers are from MSI's website, tested temperatures (everything is fine, no overheating), blew video card out of the dust, new thermal paste, tried to change the regedit key (Microsoft recommend), the last windows update, etc, etc. I tried to OC video card with MSI Afterburner, but does not want to accept the clock (last nvidia driver version 314.07) ... On various forums I saw that a lot of people have a similar problem, but not the one topic has a problem with the charger. I tried all sorts of modifications to the 3D nvidia utility. Currently I run out of ideas, I thank you in advance for your help!!!   

    Quote from: starlink on 25-April-13, 16:33:38
    Hi "I have an MSI G683R and the problem started a month ago, but sometimes pc freezes, crashes or restarts, mainly for running games; temperature problems've never had as constantly monitoring GPU and CPU and never exceed 80 degrees, I have the latest drivers for all devices, besides that I have always been maintained by removing all traces of dust inside the pc.
    I have tested the RAM, hard drive, CPU and passed without any problems, including stress testing the GPU and everything ok ", but as soon as the pc game freezes.
    The funny thing is that this never happens while I play with the battery without direct current is connected, but it is annoying the fact the battery only play for an hour.
    Please start your own topic/thread, and do not use someone elses. This is in the FAQ for the forums.

  • "display driver stopped responding and has recovered" error message

    This message has been appearing recently after I open up my laptop from sleep. The effect I notice most is on Chrome, which becomes very very laggy when typing in the omnibox address bar or using a drop down menu or switching tabs, and the computer seems to be a bit slower overall. Only way I've found to temporarily fix it is by restarting.
    I have a U530 Touch with Windows 8.1 64 bit. I think I have integrated Intel graphics? I followed Lenovo instructions to update the driver to the most current version (10.18.10.3277) which did not solve the problem.
    Wondering what I should try next, and whether this is a bug that can be resolved or actual hardware issue. My computer is still undrer warranty. 
    Thanks

    Dear Ojibway
    Welcome in lenovo community
    Have you tried to reset the power plan , 
    Please you can reset the power plan and then give a restart to the machine , once you get back in you can adjust the you power plan again according to your preferable setting 
    Let me know
    Thanks
    Alaa
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • ENVY17 3D - Display Driver stopped responding and has recovered

    hi everybody....
    plz i need help .. i have Hp Envy17 3D  , corei7 with graphic card ATI Radeon HD 5850
    when i play any game its work for 5-10sec and then it give me this message >
                     ( Display Driver stopped responding and has recovered )
    i tried to recovery system n change thermal paste , it dosnt help , could any one help plz n tell me how can i slove it
     this what i get when play game >>>>

    Hi,
    Try this fixit and check if it helps (if you havent done it yet):
    Display driver stopped responding and has recovered" error
    If problem continues then try updating or reinstalling drivers for Graphics,Chipset and BIOS updates..I'll need the exact product number to give you the link...or you can get it from this link by entering your product number:
    http://www8.hp.com/us/en/drivers.html
    Here is another link that should give you few more steps that might fix the issue if the above didnt:
    Display driver stopped responding and has recovered”, ATIKMDAG.sys type errors
    Note:
    If you have HP Support Assistant installed on the computer(The Blue Question Mark) then open it ==> Complete all pending Updates & Tuneups==> Restart and Check. It may solve your problem
    Although I am an HP employee, I am speaking for myself and not for HP.
    **Click on “Kudos” Star if you think this reply helped** Or Mark it as "Solved" if issue got fixed.

  • Display driver stopped responding and has recovered. display driver amd driver s

    Hello
    I have a problem with my graphics card: R7850 twinforce. It was working very good.(i have windows 8, 64 bits)
    But now i get this error when i play a game(after 1 min already):
    Display driver stopped responding and has recovered. display driver amd driver stopped responding and has recovered.
    Who can help me please?
    Kind regard

    Quote
    PSU:   
      What psu?
    Quote
    MEM: 8,00GB Dual-Channel DDR3 @ 799MHz (11-11-11-28)
    Model? Specs? Matched kit?
    Quote
    OC
    ? Oc yes or no?

  • Display driver stopped responding and has recovered successfully

    Hi everyone!
    I  sometimes have recently  been encountering this error 'Display driver stopped responding and has recovered successfully' .
    This is the version of ATI RADEON Graphics adapter.
    This problem is happening recently (let me say about five months ago)
    I really don't know what may be causing this problem. However, I have created a virtual machine before about only 3 days with these settings:
    Host machine has Windows 7 home premium (64Bit), and the mount of memory available is as follows:
    Physical Memory
    Memory Usage 34 %
    Total Physical 5.95 GB
    Available Physical 3.89 GB
    Total Virtual 12 GB
    Available Virtual 9.43 GB
    Guest machine has Windows 7 home prmium 64bit, and the mount of memory available is as shown below,  I really  needed to this RAM memory size because the Windows  7 got very slow with less than this size.
     Host machine has Graphic adapter with memory size of 6GB
    guest machine hat his video adapter settings below, because I really needed to this video memory size.
    But, as I said I have been facing this error for about five months before VM was created.  Thus, I don't think that the problem is related with VM's video display.
    Also, sometime when visiting some sites containing  video files needing Adobe Flash player, I was faced with that error and the browser got non-responding and then, it got closed.
    It would be highly appreciated if you could help me with this.

    dindin wrote:
    Hi Cooperator ,
    As I see , your catalyst is from 2011.You can use AMD Driver Autodetect Tool.The AMD Driver Autodetect Tool is designed to detect the model of the AMD graphics card and the version of the Microsoft® Windows operating system installed in your computer. If a new driver is available, the tool is designed to help you download it. After a successful download of the driver, the tool will provide you an option to install it.
    Download page:
    http://support.amd.com/en-us/download/auto-detect-tool
    After that ,open Catalyst control center, and set your programs to  performance that you want to run.
    It should solve your problem , this error comes when graphic card need more time that win register alow (about 2sec) , and with right drivers , it shoul fix it.
    Wish you good luck and all the best!!!
    <<<-------***
    **Click the KUDOS star on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
    Thanks a lot,
    When I tried downloading the tool from that link you provided as circled in this screen shot below 
    After amddriverdownload_installer was downloaded, I run it, then another wndows showed me
    Then after download completed, 
    this show me.
    I found the tool cannot be downloaded due to incompatible hardware/software on my computer,
    Although tool couldn not be downloaded, there are some files in this locatin after clicking install.
    As aside, this window below showed me while downloading the tool, then I don't know what let it show me.
    Is it OK or should I uninstall it if it were installed
    Also, AMD Gaming evolved was installed without asking my permission.  
    It is installed as 'Raptr.exe' in this location  'C:\Program Files (x86)\Raptr'
    Also, whenever my Windows 7 got started, this windows showed me, although I didn't set any account for this, there is accont longins as you see in this screen shot belw.
    This raises another question which is what created this account shown above?

  • [W500 and Windows 7] ati display driver stopped responding and has recovered

    Hi,
    I installed Windows 7 64bit on my W500 (almost 3 weeks old). It installed a driver for the ATI display card from Windows Update. However, since yesterday, I regularly get a driver crash (I assume...).
    It's happening when I'm scrolling in a webpage, suddenly the page hangs, the mouse and Windows itself hangs seconds later and after that, after 5 seconds, my screen goes black, the machine beeps and it's back. In the tray, I get an error: ati display driver stopped responding and has recovered.
    In the details of the driver, the following can be seen:
    Driver Date: 28/04/2009
    Driver Version: 8.612.0.0
    The card is recognized as a 3650.
    Am I doing something wrong here? Can I test with another driver (I tried installing the Windows Vista 64bit, but it doesn't seem to be willing to install...)?
    Thanks in advance,
    gill

    I have the exact same hardware and software (Win7 64) and I'm getting precisely the same symptoms, screen blanks out when I am scrolling a web page vertically using the trackpoint and the center blue trackpoint scroll button. 
    It's really annoying.
    It also never happens when the laptop is in the dock, or when the integrated graphics are engaged, this only happens when the ATI chip is running and only since ATI released the new Windows 7 drivers.
    Previously I'd ran this box on on Win7 64 but used the Vista 64 bit graphics drivers from ATI and didn't have the problem, but installation was a pain.

  • Re: Qosmio X500-11Z - display driver stopped responding and has recovered

    PN: PQX33E-02J00TCZ
    Hello i got this problem:
    my friend bought new Qosmio for gaming ... and problem is with graphic card Nvidia GT 360M
    graphic card says this: display driver stopped responding and has recovered.. screen flashes twice and its ok.
    its when i start windows (windows 7 HP 64bit) or when i click in device manager on graphic card, on interner when I surfing ... ordinary work, nothing heavy for notebook like this :-)
    i changed driver - standard uninstall, then cleaned pc with cc cleaner and install new driver
    error still continues saying that ...
    i tried nvidia drivers and official from toshiba support. both same. problem stayed.
    can anyone help ?

    > can you upload driver somewhere ? I mean graphic driver the mentioned version
    You can find it HERE .

  • HP Pavilion DV6-6077er Display driver stopped responding and has recovered

    Hello!
    I am using this laptop for 3rd year already. OS is Windows 7, every standard driver is downloaded from the official page and installed.
    I have a problem, which sometimes occurs while using web browser, graphic-editing software and some games.
    The screen starts flickering and then recovers with a message: "Display driver stopped responding and has recovered".
    I am usind official AMD drivers from 2011.
    Before I have tried to install unofficial drivers or drivers from AMD web site, but all of them had random BSODs and errors. Only the official driver works stable, but sometimes causes this error.
    Is there any possible fix for it?

    Hi Kakofonn,
    At this point I would recommend doing either a System Restore to when it worked or if you don't use restore points do a full System Recovery. If you go this route make sure that you back up your information you don't want to lose.  If you don't want to do that then I would recommend calling HP as they will be able to remotely login to your computer. You can reach HP Total Care at 1-800-474-6836 or start here if you live outside of North America.
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • MSI GT70 0ND : Display driver stopped responding and has recovered

    Hi,
    I just bought a MSI GT70 0ND 1212xfr :
    CPU : i7-3630QM
    GPU : Nvidia GTX 675MX
    RAM : 8 Go
    HDD : 750 Go  7200 trs/min
    OS : Windows 8.1 (installed by myself)
    I tried several drivers but i always get this error message when the laptop has to switch on the GTX 675MX instead of the Intel HD4000 :
    Quote
    Display driver stopped responding and has recovered.
    But finally the GTX 675MX is not enabled so i can't use my graphic card.

    Already done and it didn't change anything but i found a temporary solution : i set the nvidia parameters to start my game with the GTX, the message still appears but next the game is running with the GTX. I didn't try with another game. I hope it will works too.

  • Satellite L500 - display driver stopped responding and has recovered

    hi
    i have a concern regarding an error in my pc ......
    the error is "display driver stopped responding and has recovered"
    i had been reinstelled the windows as well as search for apdated inter display driver
    but i didnt work .....
    i appreciate for any advice and instruction regarding this problem....
    thank you very much

    In most cases such error message is caused by graphic card driver.
    Not quite sure why the graphic card driver stops responding but I think an simple GPU driver reinstallation should be helpful to sort out such issues.
    In my case such message appeared in the past for one time. It happened while gaming.
    I guess there was an problem between the driver and game or maybe the GPU temperature was too high however, it was an temporal issue.

  • Far Cry 4 - Display driver stopped responding and has recovered

    After several hours of play without driver crash i get today first driver crash in Far Cry 4.. Application stopped. Then i saw on events: Nvlddmkm Display driver stopped responding and has recovered. Its very random , sometimes i can play even 24 hours without driver crash and sometimes like today its crashed driver after 5 minutes of started game.
    Its problem with driver or my its just my card? ( i am using stock Gtx 980 ). I am using the newest drivers. All other games runs without even single crash. I tested Unigine Heaven for 10 hours, without crash. I tested Metro Last Light for few hours without crash too.
    Only Far Cry 4 sometimes crash after 5 minutes,but mostly often i can play 24 hours without driver crash.
    Using 347.88 WHQL.
    All my pc is stock, cpu is 4790k stock. GPU is on stock too.
    From what i know,crashing display driver Nvlddmkm its always graphic card ( hardware ) failure? Rma graphic card?
    TDR's are always happening because of "bad/broken" hardware?Or it can be software too?

    Well add proper specs: >>Posting Guide<<

  • Toshiba Satellite P500 "Display Driver stopped responding and has recovered."

    I have a Toshiba Satellite P500/XEO PSPGSA - 1XE08L Windows 7 Home Premium (64bit) system.  I’ve received the following random message Since I bought the computer back in 2011--- “Display Driver stopped responding and has recovered.” Since I have bought the computer I have returned it to Harvey Norman where I purchased it from for them to fix the issue. They have reformatted and whiped the computer a couple times aswell as going to the toshiba website and installing the latest drivers. I also have done the same steps as Harvey Norman.
    The computer has been sent back to Toshiba also, It was overheating so Toshiba has put a new CPU into the computer to fix that issue and also the hard drive had a fault sector so Toshiba installed a new hard drive. When Toshiba had the laptop they tried to fix this issue with no result. 
    This issue is more annoying then anything because it happens often (a few times a day) and some of the time when the driver fails and the screen stays black, the only way you can fix this is a hard shut down by holding the off button. 
    I have looked at all the threads and have seen a lot of people having this problem. I have tried all the ideas and people's ways to fix this issue but nothing has worked. 
    This problem needs to be solved and I don't want to hear that I need to reformat my computer or restore it to factory settings like tech support have told me to do because both myself and Harvey Norman has done this and IT HASN'T Fixed the issue. This issue can't be good for the computer..
    I am very dissapointed, after nearly 2 years of having this laptop the problem hasn't been fixed and Toshiba has no idea how to fix this issue. This laptop cost me over 2500 dollars and I have had more problems then I would have had with a 500 dollar computer. 

    No reply from Toshiba yet? Great customer service. 
    Anyways this is a snapshot of my screen going black and then coming back with a message popping up stating that the Display Driver has stopped responding and has recovered. 
    As you can see the window that I am in turns fully black after the driver recovers, I have to close the window and re open it. This happens many times a day.
    I also am getting the display Driver crashing and the whole screen turns black and stays black, no matter what you do the screen stays black. I hit Cntrl + Alt + Del and nothing works making me shut it down by holding the on/off key
    I do a lot of business on this computer and use it for all purposes. Due to this issue, every time the screen goes black and I have to hard restart the computer I lose all my work. Due to not knowing when this will happen I am having to lose a lot of work and start all over again. 
    This is ridiculous and Needs to be fixed. I am a Toshiba Customer and I have spent my money for the best of your products and I am very disappointed with the outcome. There has been no help, I have had nothing but issues and the customer service and support for your company is atrocious. 
    In future I will no longer be buying Toshiba and I know a lot of other people who have seen this issue and had the same problems with Toshiba support that they won't be using Toshiba either.

  • Prob. - ATI 4850: "Display driver stopped responding and has recovered"

    Hey all!
    I finally got my new iMac last week.
    After installing BootCamp my graphics card driver always crashes just after starting Windows (Windows 7 Pro 64bit). I do not need to run any software but the screen shows some "glitches" => black screen => windows recovers and the message "Display driver stopped responding and has recovered" appears.
    The process reiterates.... just a few seconds later it happens again. Sometimes Windows crashes down completely.
    I removed the driver to let Windows install it again. Nothing changend.
    Does anybody know the problem and a way to fix it?
    I was searching online for the mistakes and i do not know whether its a problem with Windows or the graphics driver.

    I did a little bid of research:
    I guess the problem is a problem known and there are a few solutions...
    http://www.microsoft.com/whdc/device/display/wddm_timeout.mspx
    The solution might be to enter windows registry and change the time windows is starting to stop and restart the display driver:
    Go to HKLM\System\CurrentControlSet\Control\GraphicsDrivers and add a new entry (DWord) "TdrDelay" with the number of seconds u want windows to restart the dislay driver. Standard seems to be 2 seconds. I found article giving advice that mentioned 4-8 seconds.
    I will give it a try tonight.
    Some other people mentioned that it is a problem with a combination of motherboard, cpu, graphics card and main memory. I think this cannot be a problem caused by the OS in generell. Otherwise more people would be confronted. Without a proper solution i will ask Apple for a new one or just send it back...
    Others just deactivated Windows Aero and fixed it...

Maybe you are looking for

  • Planned delivery cost for the scheduling agreement

    Hi Experts 1. I have an requirement to post Invoice ver. for the Planned delivery cost (freight,customs duty,CVD etc) against the Scheduling Agreement just like Import Purchases with checking off the GR Based IV Indicator before doing the GR I tried

  • Outlook 2007 not updating from ical feed

    I have removed and re-added the iCal feed multiple times. When I click on a link to the feed it downloads and can open in outlook 2007 (SP3 MSO) but this does not automatically update I have run; 1) Scanpst, 2) The original Install CD Office repair t

  • Show cfdiv and cfinput in the same row

    Hi, I have some probloms on the layout when using "ColdFusion.navigate". For example, I use function checkClosingDate() {      ColdFusion.navigate('cfc/value_validation.cfc?method=checkDate&date='+document.getElement ById('inputdate').value,'dateErro

  • Users prompted for username and password after sharing removed from servers

    Hello Community     On Sharepoint 2010 Server using the UI in a 2 server farm with an intranet running on it and everything functions as it should.  However it was noticed that from a users computer when in "Windows Explorer" if "Network" is clicked

  • How to save the credentials in windows security when opening a report?

    How to save the credentials in windows security when opening a report? in Silverlight program, user click a link to SQL server report services link, it pops up a new IE window and ask for windows security. Type the user name password in and check sav