Display driver stopped responding when i use the produd "unit wed player" for 3d games

when i downlode something annd when i click it an and it loads then if it is a 3D game like slender man  and on the site kongregate.com it cracks up the this popup says "you display driver has stoped responding restart your computer  so ms can send an error report" i do just tthat then  a messag pops up saying your comp recovred from a serious error how do i fix it?

BeaLura,
You only need your product number.
Here is a link to find the product number
Clicking the White Kudos star on the left is a way to say Thanks!
Let me know how everything goes.
Have a good day.

Similar Messages

  • Satellite A500 - Display driver stopped responding

    Hi,
    3 weeks ago I bought brand new Toshiba A500. I post here because I didn't find any helpful solution.
    Here is specification:
    Processor: intel core i3 M330 2.13GHz
    Graphic: NVIDIA GeForce GT 330M (1024 MB)
    Hard drive: MJA2320BH G2 (320 GB, 5400 RPM, SATA-II)
    RAM: 2X 2 GB DDR3-1066 DDR3 SDRAM (7-7-7-20 @ 533 MHz) (6-6-6-18 @ 457 MHz)
    Audio: Realtek ALC272 @ Intel Ibex Peak PCH
    System: Windows 7 64bit - directed from Toshiba
    The issue is: at random situations, the screen is turn black for a couple of seconds, then the message is pop up saying "Display driver stopped responding and has recovered - display driver NVIDIA Kernel Mode Driver, Version 187.98 stopped responding and has successfully recovered." It happens several times per day.
    Sometimes display driver can't be recovered and than system hangs and must be reset. Problem occur at first day after five minutes of using (when there wasn't install anything without OS).
    Problem occurs always during normal working with applications (MS office, firefox, etc.). It's completely random - there in not two the same situations - so when I watch hd films in youtube on full screen it crashes several times, but when I restart OS and than play the same movie it works correctly.
    Application causes this problem is called TDR (Time-out Detection and Recovery).
    This application reset GPU when didn't get respond during 2 sec. But in Windows7 registry doesn't have entries controlled this application.
    Since than I tried following solutions:
    - BIOS update;
    - System reinstall;
    - Display driver update to version 197.16;
    - Checking temperature on graphic card (when issue occurs temperature on graphic card didn't exceed 47deg, and processor 36deg);
    - Java update (older version of Java can causes some device problems);
    - Adobe update (same as Java);
    - Turn off aero;
    - Windows 7 updates;
    - Turn off audio (realtek card);
    None of them works.
    The problem didn't occur during playing games (i.ex. Witcher). I can play 8 hours and nothing weird happens.
    I notice also that problem occurs during opening some applications or entering new tasks (when energy demand rapidly increases).
    I wondering that is some driver problem or I should return the laptop to the service.
    I suspect that problem can be to big difference in voltage on graphic card but I can't verified that.
    If somebody meet with this problem I will appreciate any help.

    hi,
    i had the same issue with my A500-1dn equipped with GT 230 M, getting the message ,,Display driver stopped responding,,. I updated the card graphic driver from nvidia.com 3 weeks ago and since that time it' s gone ( I hope forever).

  • Adobe CS 5.5 Photoshop error I get the message "display driver stopped responding".

    I just purchased and installed Adobe CS 5.5. I launched Photoshop and when I tried to view an image photoshop crashed and I get the message "display driver stopped responding". I couldn't do anything after that. I have HP elitebook laptop, not sure if that makes a difference. Please advise and what I can do to fix the problem.

    Go to the HP site and update your graphics driver:
    HP Support, Drivers, Contact and Help Forums | HP® Support

  • SLI GTX 970 Nvlddmkm "Display driver stopped responding and has recovered" Error

    Hi everyone,
    I'm having an issue with driver crashes and was hoping someone on here would be able to help. The error I am getting is: Nvlddmkm "Display driver stopped responding and has recovered".
    My PC specs are:
    Windows 8.1 Pro
    i7 4770k with Corsair H100i
    2x 8GB HyperX RAM
    Asus Maximus VII Ranger Mobo
    2x MSI GTX 970's
    750w Superflower Leadex PSU
    I've noticed that the error usually happens while the cards are cooling down after playing a game, although it has been known to occasionally happen while gaming. I am have MSI Afterburner running and have noticed that the GPU usage spikes up to 100% then the power usage drops completely just before the crash.
    This problem has persisted through 3 clean OS installs so I do not believe it is a driver issue.
    My initial thoughts were that the PSU could be insufficient, but after some reading online my system really shouldn't draw anywhere near 750w. What do you think? I am not totally clued up on PSU's, so not sure if my wiring could also be causing the issue - here's a pic:
    The cards use a single cable that joins both cards for both 8-pins, then two other power cables for the 6-pin. Would this be a problem?
    It's also worth noting that the issue doesn't seem to occur when SLI is disabled. I never had any problems with the original card prior to adding a second card though so I do not think it needs RMA'ing.
    Any advice would be greatly appreciate. Thanks in advance.

    Quote from: Svet on 08-June-15, 17:36:36
    oki remove the second card[your old one] and test the newest card only
    I will try this tomorrow, thanks.
    A bit more info, it crashes with SLI disabled. Just found out tonight for definite.
    Here is a screenshot of what MSI Afterburner shows when it crashes.

  • Msi GT683R "Display driver stopped responding and has recovered" error.

    I bought a laptop before 6 months, installd windows 7 x64 and everything works fine. Suddenly, five days before I got this eror " Display driver stopped responding and has recovered ... "but the laptop operates normally, when not connected to the charger, the only difference is that the graphics card works only on P8 state 203/606/324. I've tried everything, install new windows, tried all the video drivers back 6 version, tried two different chargers, raised the voltage in the video card, flash the latest BIOS, flash latest EC driver, changed several types of RAM memory, installed win xp x64, all drivers are from MSI's website, tested temperatures (everything is fine, no overheating), blew video card out of the dust, new thermal paste, tried to change the regedit key (Microsoft recommend), the last windows update, etc, etc. I tried to OC video card with MSI Afterburner, but does not want to accept the clock (last nvidia driver version 314.07) ... On various forums I saw that a lot of people have a similar problem, but not the one topic has a problem with the charger. I tried all sorts of modifications to the 3D nvidia utility. Currently I run out of ideas, I thank you in advance for your help!!!   

    Quote from: starlink on 25-April-13, 16:33:38
    Hi "I have an MSI G683R and the problem started a month ago, but sometimes pc freezes, crashes or restarts, mainly for running games; temperature problems've never had as constantly monitoring GPU and CPU and never exceed 80 degrees, I have the latest drivers for all devices, besides that I have always been maintained by removing all traces of dust inside the pc.
    I have tested the RAM, hard drive, CPU and passed without any problems, including stress testing the GPU and everything ok ", but as soon as the pc game freezes.
    The funny thing is that this never happens while I play with the battery without direct current is connected, but it is annoying the fact the battery only play for an hour.
    Please start your own topic/thread, and do not use someone elses. This is in the FAQ for the forums.

  • Display driver stopped responding and has recovered successfully

    Hi everyone!
    I  sometimes have recently  been encountering this error 'Display driver stopped responding and has recovered successfully' .
    This is the version of ATI RADEON Graphics adapter.
    This problem is happening recently (let me say about five months ago)
    I really don't know what may be causing this problem. However, I have created a virtual machine before about only 3 days with these settings:
    Host machine has Windows 7 home premium (64Bit), and the mount of memory available is as follows:
    Physical Memory
    Memory Usage 34 %
    Total Physical 5.95 GB
    Available Physical 3.89 GB
    Total Virtual 12 GB
    Available Virtual 9.43 GB
    Guest machine has Windows 7 home prmium 64bit, and the mount of memory available is as shown below,  I really  needed to this RAM memory size because the Windows  7 got very slow with less than this size.
     Host machine has Graphic adapter with memory size of 6GB
    guest machine hat his video adapter settings below, because I really needed to this video memory size.
    But, as I said I have been facing this error for about five months before VM was created.  Thus, I don't think that the problem is related with VM's video display.
    Also, sometime when visiting some sites containing  video files needing Adobe Flash player, I was faced with that error and the browser got non-responding and then, it got closed.
    It would be highly appreciated if you could help me with this.

    dindin wrote:
    Hi Cooperator ,
    As I see , your catalyst is from 2011.You can use AMD Driver Autodetect Tool.The AMD Driver Autodetect Tool is designed to detect the model of the AMD graphics card and the version of the Microsoft® Windows operating system installed in your computer. If a new driver is available, the tool is designed to help you download it. After a successful download of the driver, the tool will provide you an option to install it.
    Download page:
    http://support.amd.com/en-us/download/auto-detect-tool
    After that ,open Catalyst control center, and set your programs to  performance that you want to run.
    It should solve your problem , this error comes when graphic card need more time that win register alow (about 2sec) , and with right drivers , it shoul fix it.
    Wish you good luck and all the best!!!
    <<<-------***
    **Click the KUDOS star on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
    Thanks a lot,
    When I tried downloading the tool from that link you provided as circled in this screen shot below 
    After amddriverdownload_installer was downloaded, I run it, then another wndows showed me
    Then after download completed, 
    this show me.
    I found the tool cannot be downloaded due to incompatible hardware/software on my computer,
    Although tool couldn not be downloaded, there are some files in this locatin after clicking install.
    As aside, this window below showed me while downloading the tool, then I don't know what let it show me.
    Is it OK or should I uninstall it if it were installed
    Also, AMD Gaming evolved was installed without asking my permission.  
    It is installed as 'Raptr.exe' in this location  'C:\Program Files (x86)\Raptr'
    Also, whenever my Windows 7 got started, this windows showed me, although I didn't set any account for this, there is accont longins as you see in this screen shot belw.
    This raises another question which is what created this account shown above?

  • [W500 and Windows 7] ati display driver stopped responding and has recovered

    Hi,
    I installed Windows 7 64bit on my W500 (almost 3 weeks old). It installed a driver for the ATI display card from Windows Update. However, since yesterday, I regularly get a driver crash (I assume...).
    It's happening when I'm scrolling in a webpage, suddenly the page hangs, the mouse and Windows itself hangs seconds later and after that, after 5 seconds, my screen goes black, the machine beeps and it's back. In the tray, I get an error: ati display driver stopped responding and has recovered.
    In the details of the driver, the following can be seen:
    Driver Date: 28/04/2009
    Driver Version: 8.612.0.0
    The card is recognized as a 3650.
    Am I doing something wrong here? Can I test with another driver (I tried installing the Windows Vista 64bit, but it doesn't seem to be willing to install...)?
    Thanks in advance,
    gill

    I have the exact same hardware and software (Win7 64) and I'm getting precisely the same symptoms, screen blanks out when I am scrolling a web page vertically using the trackpoint and the center blue trackpoint scroll button. 
    It's really annoying.
    It also never happens when the laptop is in the dock, or when the integrated graphics are engaged, this only happens when the ATI chip is running and only since ATI released the new Windows 7 drivers.
    Previously I'd ran this box on on Win7 64 but used the Vista 64 bit graphics drivers from ATI and didn't have the problem, but installation was a pain.

  • HP Pavilion DV6-6077er Display driver stopped responding and has recovered

    Hello!
    I am using this laptop for 3rd year already. OS is Windows 7, every standard driver is downloaded from the official page and installed.
    I have a problem, which sometimes occurs while using web browser, graphic-editing software and some games.
    The screen starts flickering and then recovers with a message: "Display driver stopped responding and has recovered".
    I am usind official AMD drivers from 2011.
    Before I have tried to install unofficial drivers or drivers from AMD web site, but all of them had random BSODs and errors. Only the official driver works stable, but sometimes causes this error.
    Is there any possible fix for it?

    Hi Kakofonn,
    At this point I would recommend doing either a System Restore to when it worked or if you don't use restore points do a full System Recovery. If you go this route make sure that you back up your information you don't want to lose.  If you don't want to do that then I would recommend calling HP as they will be able to remotely login to your computer. You can reach HP Total Care at 1-800-474-6836 or start here if you live outside of North America.
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • Toshiba Satellite P500 "Display Driver stopped responding and has recovered."

    I have a Toshiba Satellite P500/XEO PSPGSA - 1XE08L Windows 7 Home Premium (64bit) system.  I’ve received the following random message Since I bought the computer back in 2011--- “Display Driver stopped responding and has recovered.” Since I have bought the computer I have returned it to Harvey Norman where I purchased it from for them to fix the issue. They have reformatted and whiped the computer a couple times aswell as going to the toshiba website and installing the latest drivers. I also have done the same steps as Harvey Norman.
    The computer has been sent back to Toshiba also, It was overheating so Toshiba has put a new CPU into the computer to fix that issue and also the hard drive had a fault sector so Toshiba installed a new hard drive. When Toshiba had the laptop they tried to fix this issue with no result. 
    This issue is more annoying then anything because it happens often (a few times a day) and some of the time when the driver fails and the screen stays black, the only way you can fix this is a hard shut down by holding the off button. 
    I have looked at all the threads and have seen a lot of people having this problem. I have tried all the ideas and people's ways to fix this issue but nothing has worked. 
    This problem needs to be solved and I don't want to hear that I need to reformat my computer or restore it to factory settings like tech support have told me to do because both myself and Harvey Norman has done this and IT HASN'T Fixed the issue. This issue can't be good for the computer..
    I am very dissapointed, after nearly 2 years of having this laptop the problem hasn't been fixed and Toshiba has no idea how to fix this issue. This laptop cost me over 2500 dollars and I have had more problems then I would have had with a 500 dollar computer. 

    No reply from Toshiba yet? Great customer service. 
    Anyways this is a snapshot of my screen going black and then coming back with a message popping up stating that the Display Driver has stopped responding and has recovered. 
    As you can see the window that I am in turns fully black after the driver recovers, I have to close the window and re open it. This happens many times a day.
    I also am getting the display Driver crashing and the whole screen turns black and stays black, no matter what you do the screen stays black. I hit Cntrl + Alt + Del and nothing works making me shut it down by holding the on/off key
    I do a lot of business on this computer and use it for all purposes. Due to this issue, every time the screen goes black and I have to hard restart the computer I lose all my work. Due to not knowing when this will happen I am having to lose a lot of work and start all over again. 
    This is ridiculous and Needs to be fixed. I am a Toshiba Customer and I have spent my money for the best of your products and I am very disappointed with the outcome. There has been no help, I have had nothing but issues and the customer service and support for your company is atrocious. 
    In future I will no longer be buying Toshiba and I know a lot of other people who have seen this issue and had the same problems with Toshiba support that they won't be using Toshiba either.

  • MSI GT70 0ND : Display driver stopped responding and has recovered

    Hi,
    I just bought a MSI GT70 0ND 1212xfr :
    CPU : i7-3630QM
    GPU : Nvidia GTX 675MX
    RAM : 8 Go
    HDD : 750 Go  7200 trs/min
    OS : Windows 8.1 (installed by myself)
    I tried several drivers but i always get this error message when the laptop has to switch on the GTX 675MX instead of the Intel HD4000 :
    Quote
    Display driver stopped responding and has recovered.
    But finally the GTX 675MX is not enabled so i can't use my graphic card.

    Already done and it didn't change anything but i found a temporary solution : i set the nvidia parameters to start my game with the GTX, the message still appears but next the game is running with the GTX. I didn't try with another game. I hope it will works too.

  • GX740 computer - Display driver stopped responding and has recovered

    GX740 computer - Display driver stopped responding and has recovered
    hi,
    As I told in the title I am experiencing this message: "Display driver stopped responding and has recovered" only when I am playing games. The symptoms are a freeze of the screen (but I can still see pointer of the mouse moving) for 10 seconds, then the screen become black, and the game recover. Frequency of this depends of the game, but it can be really often.
    To be more precise about the situation: I just sent my laptop to Rma services (for a totally different problem), they said that they updated the vBios of my graphic card.
    before sending my laptop, I never experienced this kind of message before. Even if sometimes I used to have GSOD or BSOD screen on certain games.
    Moreover, my Graphic drivers are up to date (using driver sweeper and ccleaner ), I tried several stuff to fix this problem, but nothing worked so far. (reinstalling system, try different ATI drivers, all of my drivers are up to date besides, try to set different options in windows, act on registry  ... and other stuff).
    So I do not know what causes that, maybe the new vBios is not compatible with something ? Ram memory issues ? power issues ?
    According to what I read , it is quite a very common message, and it does not seem to be hardware related.
    But we never know. Could you please help me on this, because I am running out of ideas to fix this issue.
    Thank you for helping
    Geoffrey

    Quote from: ricor on 26-January-12, 22:43:59
    Svet,
    Don't you think that the new bios from the 3D card bring some bugs that could be resolved by flashing the motherboard bios ?
    Thanks
    Rik
    Quote from: ricor on 26-January-12, 22:43:59
    Svet,
    Don't you think that the new bios from the 3D card bring some bugs
    Could be, but there is no such reports until now.
    Quote
    that could be resolved by flashing the motherboard bios ?
    The latest vbios should be used with complect with latest EC version.
    Quote
    nevermind... I also contacted the custumer service, and since Friday no answer. Hopefully, here Svet tried to help greatly thx man.
    Too bad, we could not fix it.
    contact to repair person again and tell them that the notebook which is suppose to be repaired don't work properly..

  • T61 model 8898 Display driver stopped responding

    Hi,
    I own a Lenovo T61 notebook running Windows 7 (RTM). Very frequently when the computer resumes from standby, the screen will start flashing black and Windows shows "Display driver stopped responding and has recovered."
    Sometimes it will never recover and just freeze or BSOD. The minidump shows GRAPHICS_DRIVER_TDR_FAULT.
    The graphics board on this machine is Intel 965 Express and I'm using the latest version of the driver downloaded from Intel's site (8.15.10.1930).
    This issue has been driving me crazy for quite some time and although I've been sticking to Thinkpads for years this is the first time I'm considering ditching them. I should also mention this happened when I was running Vista as well.
    Has anyone experienced this? What should I do? The machine is under warranty but I'm pretty sure dropping it at the service center will do nothing but waste my time since this issue is not always reproducible and they'll probably just run some tests which will all pass and I'll end up with a re-imaged machine and the same problem.
    Regards,
    Danny

    Just a thought, not sure if it will help.  But see if you can install the most recent Lenovo driver instead of one from Intel.
    I haven't tested used this particular display you mentioned, but with some other display drivers I have found that manufacturer's drivers are not as trouble free as the ones from Lenovo.
    Don Mannino

  • Display driver stopped responding W510

    On my W510 with Windows 7 x64, the screen will go suddenly blank for couple of seconds, then I get the message "Display driver stopped responding and has successfully recovered".  My suspicion is that it happens most often when I am running a program that uses Windows Presentation Foundation (WPF), but I am not sure. Is there any fix for this? It worries me that the system is going to lock up and lose data at some point.
    There is a new NVIDIA display driver (http://www.nvidia.com/object/notebook_winvista_win7_x64_197.16_whql.html) as of March 29, 2010. Does anyone know if this would fix it and if it is safe to use this with the W510?

    Hi,
    I have the exactly same problem on a W510 64bit with Windows 7.  I have the latest drivers installed released by Lenovo on 15 June.
    From my reading on this and other on-line forums this is a common problem with Lenovos, especially W500, W510.
    I have been onto Lenovo Support (it is called "Support" because we are supporting them fix their faulty products ) and they say if you have the latest drivers then it is likely a hardware problem.  Forums say the same thing: apparently there is an huge issue with quality of the system boards.
    However, I checked my laptop directly at the NVIDIA web site and that scan says my drivers are out of date and should be replaced by an AutoCad driver instead.  Curiously their AutoCad driver is dated May which is older than the release date of the driver Lenovo have released but there can be many reasons for this mismatch in dates.
    So I don't know if this is a driver or hardware issue.  Not do Lenovo Support.
    I suggest you should log the problem with Lenovo Support and return the laptop for repair or, if they are really serious about customer service, a new replacement.
    Sorry, I understand that this is a "head in hands" moment, but they have your money and you have their faulty product so what else can you do?

  • Display driver stopped responding and has recoverd!!!

     i keep getting display driver stopped responding and has recoverd, when i watch a video or play a game i have brand new 
    hp compaq 100 - 002eb Desktop PC 
    (serial no.) {Private Information Removed}
    (product no.) E6Q45EA#UUG
    im using windows 8 
    can some one help me
    Phet

    Hi Phet, the link that I sent you will work for windows 8.  I was also wondering if you did the free upgrade to windows 8.1 ? 
    If you decide that you want to call HP Total care, here is a link that will give you the calling information for your area.
    http://goo.gl/qHlWX
    Thank you
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Re: Satellite U500-PSU9ME - display driver stopped responding

    Since I purchased the laptop I had a problem with the display driver.
    The screen keeps blackout and comes back after a second with the massage display driver stopped responding and has recovered, I wish I can attach a screenshot. The laptop have nVidia card on it.
    The dealer replaced it for me but even with the new one, it comes each day once or twice
    This is my 1st Toshiba, I always heard they are good but now I am kind of confused!
    Anyone had this problem and could solve it? Please help.
    Note: i updated all drivers.

    > {quote:title=MasterG wrote:}{quote}
    > +@Ai1dRo0kNotBot+
    > It seems you did read any other solution suggestions from other users who have experienced a similar issue with a graphic driver.
    >
    > In my personal opinion the failing of the video driver has nothing to do with a gpu overheating.
    >
    > As other guys already suggested, an display driver updated has helped!
    > The others said that disabling of Win 7 aero theme could be helpful too!
    >
    > As you see there are different reasons for such issue and its not matter of notebook manufacturer but in my opinion ATI and nVidia are still developing the drivers for Win 7 and there are different hardware and software configurations which could affect the driver functionality!
    Why not? Driver stops responding only when cpu cooler runs on minimal rpm, seems to me, that fan rpm basically depend on cpu heat (_not_ gpu).
    Very good solution, but I have a question: would you buy a server that works only when you disable lan card? would you buy a car which can turn only left?
    No matter. Never the less, I'm satisfied with how the Intel i3 and Nvidia 310m works.
    The thing i DO NOT like and which concerns manufacturer directly is keyboard. I don't know who designed flat buttons, but it's the worst keyboard I seen EVER. You can realize my disappointment, changing eeepc to u500 expecting better and getting THIS. They could at least have upgrade for keyboard replacement, the part that cost $50 spoils $1100, wonderful...
    :( I imagined my fist toshiba as much happier thing...
    Message was edited by: Ai1dRo0kNotBot

Maybe you are looking for

  • OWB - Installation Architecture and Infrastructure configuration

    I thought it is a good idea to throw this out to the OWB community to see what your thinking is. This is my first project; we are currently on detail design. The Client requests a document that covers the following details. Architecture and Infrastru

  • Severe screen flickering in Warcraft 3

    I installed it, renamed the movies folder as well. However, when I run the game, I get severe screen flickering, to the extent that the game menu is visible once every 4-5 seconds. Any thoughts on how to solve this? Since I cannot use the menu becaus

  • InDesign vs. Quark in regards to image file paths

    The small daily newspaper for which I work is transitioning from Quark 7.5 to InDesign 8 (the one that comes with CS6). We're using Markzware's Q2ID to convert some of our Quark documents to InDesign but ID doesn't update the images within a document

  • Watch Folder Returned an error message(Elements 10)

    I recently upgraded from elements 8 to version 10, and am having nothing but trouble in one area. When I start Elements, the box will come up saying "updating", and will take sometimes 18 hours to go to 100%, even if there have been no photos to add.

  • Will import from camera but not HD???

    I have a samsung TL34HD digital camera, and it takes movies in h.264. If i import movies straight from the camera it will import it fine, but if i copy to the hd THEN import, it will show up blank in the library. Thoughts?