Display error at the time of Tax code selection
Dear All,
I have done config for Tax code, At the time of PO creation system display folliwing error while select tax code.
"Customization for 1005 j_1iindcus missing in table".
Regards,
Mahesh Wagh
Hi,
Please go to SM30 and enter the Table Name J_1IINDCUS. Now click on Maintain. Enter your company Code 1005 and Maintain the all settings which are required.
I hope it should work
Regards,
Jigar
Similar Messages
-
Update termination error at the time of order creation and chamge?
Dear gurus,
Facing an error at the time of creation of order.
system is giving update termination error & when we are going in change mode of that order system is giving an error message " SD document XXXX is not in the database or has been achieved"
please treat on priority
regards,
kraiHi,
Goto ST22 T.Code and analyse the error.The error message why it is terminated will be displayed here.
Or go to SBWP T.Code in the user where you got this error and check the inbox.
It will display why the error is appearing.
Show the same to the ABAPer and ask them to work on it.
I think your server may be slow and it will take some time to update the order created by you.But I am not sure.Check the error message.
Regards,
Krishna. -
Dear All,
Error at the time of MIRO while doing invoice for customs and the error showing as Tax code VO country IN does not exist in procedure ZAXINN
VO i maintained for Non Taxable transactions and Imports PO wont have any tax procedure as pricing procure is defined in MM Route only.
Please suggest me why this error is comming
Thanks,
Tiruhi
check u r tax code rates if ur using tax inj process
or maintain rates in FV11
Create a condition record by T.code FV11 for any of the condition record in your tax procedure TAXINN and check that tax code in header and line item should be same.
Also use T.Code: OBBG and assign ur tax procedure with ur county code and save. Now try ur transaction.
also check
SPRO-LOGISTIC GENERAL - TAX ON GOODS MOVEMENT- INDIA - BASIC SETTINGS - DETERMINATION OF EXCISE DUTY - CONDITION BASED EXCISE DETERMINATION - ASSIGN TAX CODE TO COMPANY CODE.
Check in SPro > materials Management > LIV > default values for tax code > give u r company code and try
reward if helpful
regards
kunal -
Update termination error at the time of order creation
Dear gurus,
Facing an error at the time of creation of order.
system is giving update termination error & when we are going in change mode of that order system is giving an error message " SD document XXXX is not in the database or has been achieved"
please treat on priority
regards,
kraiHello ,
"Update terminated " error has two reasongs.
First is system update was not active and hence terminated
For this to check Goto the transaction code SM13 and check whether the SYSTEM UPDATE is active or not.
If it is active ,
Then click on the Option TOBE updated in the status and execute, then in the next screen you can find some list of documents that are not updated and causing error .
Click on MODULES in the screen and find the erro which causing this error.
Most this kind of error will happen if something in the Funcion Module or USER EXIT is missing.
Please check and revert back if you need further details
Also check the link
http://help.sap.com/saphelp_nw04/helpdata/en/e5/de870535cd11d3acb00000e83539c3/frameset.htm
regards,
santosh -
Error at the time of GR/IR Clearing
Hi,
I am getting the following error at the time of manual clearing-F-03 or automatic clearing F.13
Document splitting: Items for clearing 1000/5000000001/2010/002 not found
Message no. GLT0002
Diagnosis
Document splitting cannot perform clearing because it was not possible to find complete splitting information on the items to be cleared (company code 1000, document number 5000000001, fiscal year 2010, item 002).
System Response
Clearing cannot be performed and the document cannot be posted.
Procedure
Exclude the affected item from clearing.
It may be that this item was not posted with active document splitting. In this case, this item or document would have to be migrated.
Kindly provide the solution.
Regards,
Hansa Chechani
Edited by: Hansachechani on Sep 2, 2010 6:58 AMHi Raheem,
I am running transaction code f.13 GR/IR clearing account. We have maintianed 3 three currencies. 1st AED-co code currency, 2nd usd- parallel currency, 3rd INR- parallel currency. At the time of clearing system is giving above error of account requires an assignment to a co object for GL account of Exchange Gain/Loss account. The exchange rate difference is coming for the 2nd currency ie USD. In the leading ledger there is no problem. We have done the setting in OKB9 and assigned the co object for Gl account of Exchange gain and loss. Hope you have understood the issue. Is there any solution apart from the setting in OKB9.
Mahesh -
Coherence Error at the time of Starting weblogic Server
Hi ,
I am getting below error at the time of starting Weblogic OSB managed server
We are using osb_cluster1 (Unicast) for osb_server1 managed server.
When Weblogic server try to start the managed server we get following Coherence errors and startup scripts try to point to Oracle Coherence 3.6.0.4.(its mainly happening in starting osb_server1 managed server, this error is not appearing during soa_server1 managed server start)
We don't want to use the coherence at all, we are trying to disable the coherence feature, but hardly getting any success in it, every time during server start-up following error appears.
Let me know if you have any solution to it.
####<Mar 5, 2012 9:18:55.424 AM > <Warning> <Coherence> <sjsj-idm.kuy.co.wo> <osb_server1> <Logger@406289568 3.6.0.4> <<anonymous>> <> <3976a80e38d52337:-f13ff44:135df5aa8b6:-8000-0000000000000007> <1330892335424> <BEA-000000> <Oracle Coherence 3.6.0.4 (member=n/a): This Member(Id=0, Timestamp=2012-03-05 09:18:23.752, Address=11.49.63.33:7880, MachineId=31265, Location=site:kuy.co.wo,machine:deap-idm01,process:10629, Role=OSB-node) has been attempting to join the cluster using WKA list [sjsj-idm.kuy.co.wo/11.49.63.33:9003] for 31 seconds without success; this could indicate a mis-configured WKA, or it may simply be the result of a busy cluster or active failover.>
####<Mar 5, 2012 9:18:55.425 AM > <Warning> <Coherence> <sjsj-idm.kuy.co.wo> <osb_server1> <Logger@406289568 3.6.0.4> <<anonymous>> <> <3976a80e38d52337:-f13ff44:135df5aa8b6:-8000-0000000000000007> <1330892335425> <BEA-000000> <Oracle Coherence 3.6.0.4 (member=n/a): Delaying formation of a new cluster; waiting for well-known nodes to respond>
####<Mar 5, 2012 9:22:58.769 AM > <Error> <Coherence> <sjsj-idm.kuy.co.wo> <osb_server1> <Logger@406289568 3.6.0.4> <<anonymous>> <> <3976a80e38d52337:-f13ff44:135df5aa8b6:-8000-0000000000000007> <1330892578769> <BEA-000000> <Oracle Coherence 3.6.0.4 (member=n/a): Detected soft timeout) of {WrapperGuardable Guard{Daemon=IpMonitor} Service=ClusterService{Name=Cluster, State=(SERVICE_STARTED, STATE_ANNOUNCE), Id=0, Version=3.6}}>
####<Mar 5, 2012 9:22:58.770 AM > <Warning> <Coherence> <sjsj-idm.kuy.co.wo> <osb_server1> <Logger@406289568 3.6.0.4> <<anonymous>> <> <3976a80e38d52337:-f13ff44:135df5aa8b6:-8000-0000000000000007> <1330892578770> <BEA-000000> <Oracle Coherence 3.6.0.4 (member=n/a): Attempting recovery of Guard{Daemon=IpMonitor}>
####<Mar 5, 2012 9:23:25.530 AM > <Error> <Coherence> <sjsj-idm.kuy.co.wo> <osb_server1> <Logger@406289568 3.6.0.4> <<anonymous>> <> <3976a80e38d52337:-f13ff44:135df5aa8b6:-8000-0000000000000007> <1330892605530> <BEA-000000> <Oracle Coherence 3.6.0.4 (member=n/a): Failure to join a cluster for 301 seconds; stopping cluster service.>
####<Mar 5, 2012 9:23:25.879 AM > <Error> <Coherence> <sjsj-idm.kuy.co.wo> <osb_server1> <Logger@406289568 3.6.0.4> <<anonymous>> <> <3976a80e38d52337:-f13ff44:135df5aa8b6:-8000-0000000000000007> <1330892605879> <BEA-000000> <Oracle Coherence 3.6.0.4 (member=n/a): Error while starting cluster: com.tangosol.net.RequestTimeoutException: Timeout during service start: ServiceInfo(Id=0, Name=Cluster, Type=Cluster
MemberSet=ServiceMemberSet(
OldestMember=n/a
ActualMemberSet=MemberSet(Size=0, BitSetCount=0
MemberId/ServiceVersion/ServiceJoined/MemberState
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onStartupTimeout(Grid.CDB:6)
at com.tangosol.coherence.component.util.daemon.queueProcessor.Service.start(Service.CDB:28)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.start(Grid.CDB:6)
at com.tangosol.coherence.component.net.Cluster.onStart(Cluster.CDB:637)
at com.tangosol.coherence.component.net.Cluster.start(Cluster.CDB:11)
at com.tangosol.coherence.component.util.SafeCluster.startCluster(SafeCluster.CDB:4)
at com.tangosol.coherence.component.util.SafeCluster.restartCluster(SafeCluster.CDB:7)
at com.tangosol.coherence.component.util.SafeCluster.ensureRunningCluster(SafeCluster.CDB:26)
at com.tangosol.coherence.component.util.SafeCluster.start(SafeCluster.CDB:2)
at com.tangosol.net.CacheFactory.ensureCluster(CacheFactory.java:998)
at com.bea.alsb.coherence.impl.CoherenceProvider.<init>(CoherenceProvider.java:45)
at com.bea.alsb.coherence.impl.CoherenceProviderFactory.newInstance(CoherenceProviderFactory.java:21)
at com.bea.alsb.coherence.init.CoherenceAppListener.preStart(CoherenceAppListener.java:45)
at weblogic.application.internal.flow.BaseLifecycleFlow$PreStartAction.run(BaseLifecycleFlow.java:282)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.application.internal.flow.BaseLifecycleFlow$LifecycleListenerAction.invoke(BaseLifecycleFlow.java:199)
at weblogic.application.internal.flow.BaseLifecycleFlow.preStart(BaseLifecycleFlow.java:62)
at weblogic.application.internal.flow.HeadLifecycleFlow.prepare(HeadLifecycleFlow.java:284)
at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:614)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:54)
at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:184)
at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:58)
at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:141)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:39)
at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:191)
at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:22)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:166)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)>
Edited by: 858026 on Mar 4, 2012 6:21 PM
Edited by: 858026 on Mar 4, 2012 6:23 PMHi NJ,
In WL console while setting up cluster I have given Messaging
Mode to Unicast,
By default Multicast address and ports comes up
Multicast Address - 239.192.0.0,
Multicast Port- 7001
I have modified the override file but still getting given error logs while server startup and its trying to look for override file in Oracle Coherence 3.6.0.4/coherence.jar
<!DOCTYPE coherence SYSTEM ""coherence.dtd"">
<coherence>
<cluster-config>
<!-- By default, this is using a multicast listener for cluster discovery, etc.
If you wish to use a unicast listener:
- update the entries in /coherence/unicast-listener/well-known-addresses/socket for each member of the cluster
(or specify the corresponding system properties)
- set the /coherence/unicast-listener/address to the host name of this machine
See http://coherence.oracle.com/display/COH35UG/well-known-addresses for more details. -->
<unicast-listener>
<well-known-addresses>
<socket-address id=""1"">
<address system-property=""OSB.coherence.wka1""></address>
<port system-property=""OSB.coherence.wka1.port""></port>
</socket-address>
<socket-address id=""2"">
<address system-property=""OSB.coherence.wka2""></address>
<port system-property=""OSB.coherence.wka2.port""></port>
</socket-address>
<socket-address id=""3"">
<address system-property=""OSB.coherence.wka3""></address>
<port system-property=""OSB.coherence.wka3.port""></port>
</socket-address>
<socket-address id=""4"">
<address system-property=""OSB.coherence.wka4""></address>
<port system-property=""OSB.coherence.wka4.port""></port>
</socket-address>
<socket-address id=""5"">
<address system-property=""OSB.coherence.wka5""></address>
<port system-property=""OSB.coherence.wka5.port""></port>
</socket-address>
<socket-address id=""6"">
<address system-property=""OSB.coherence.wka6""></address>
<port system-property=""OSB.coherence.wka6.port""></port>
</socket-address>
<socket-address id=""7"">
<address system-property=""OSB.coherence.wka7""></address>
<port system-property=""OSB.coherence.wka7.port""></port>
</socket-address>
<socket-address id=""8"">
<address system-property=""OSB.coherence.wka8""></address>
<port system-property=""OSB.coherence.wka8.port""></port>
</socket-address>
<socket-address id=""9"">
<address system-property=""OSB.coherence.wka9""></address>
<port system-property=""OSB.coherence.wka9.port""></port>
</socket-address>
</well-known-addresses>
<address system-property=""OSB.coherence.localhost"">127.0.0.1</address>
<port system-property=""OSB.coherence.localport"">7890</port>
</unicast-listener>
<multicast-listener>
<address system-property=""OSB.coherence.clusteraddress"">239.192.0.0</address>
<port system-property=""OSB.coherence.clusterport"">7001</port>
</multicast-listener>
</cluster-config>
</coherence>
####<Mar 6, 2012 3:00:44.050 PM NZDT> <Notice> <StdErr> <dete-idm01.hnz.co.nz> <osb_server1> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1330999244050> <BEA-000000> <2012-03-06 15:00:44.015 Oracle Coherence 3.6.0.4 <Info> (thread=[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'): Loaded operational configuration from "zip:/u01/app/oracle/product/OSB11.1.1.4/oracle_common/modules/oracle.coherence_3.6/coherence.jar!/tangosol-coherence.xml">
####<Mar 6, 2012 3:00:44.053 PM NZDT> <Notice> <StdErr> <dete-idm01.hnz.co.nz> <osb_server1> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1330999244053> <BEA-000000> <2012-03-06 15:00:44.029 Oracle Coherence 3.6.0.4 <Info> (thread=[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'): Loaded operational overrides from "zip:/u01/app/oracle/product/OSB11.1.1.4/oracle_common/modules/oracle.coherence_3.6/coherence.jar!/tangosol-coherence-override-dev.xml">
####<Mar 6, 2012 3:00:44.053 PM NZDT> <Notice> <StdErr> <dete-idm01.hnz.co.nz> <osb_server1> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1330999244053> <BEA-000000> <2012-03-06 15:00:44.030 Oracle Coherence 3.6.0.4 <Info> (thread=[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'): Loaded operational overrides from "zip:/u01/app/oracle/product/OSB11.1.1.4/user_projects/domains/OSBD/servers/osb_server1/tmp/_WL_user/ALSB Coherence Cache Provider/yannht/APP-INF/lib/com.bea.alsb.coherence-impl.jar!/tangosol-coherence-override.xml">
####<Mar 6, 2012 3:00:44.073 PM NZDT> <Error> <OSB Coherence WebLogic> <dete-idm01.hnz.co.nz> <osb_server1> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0ed5cc20267507d3:a44cfd4:135e5bc3642:-8000-0000000000000003> <1330999244073> <BEA-2032481> <Unable to initialize OSB Coherence Cache Provider because there was an error starting Coherence:
com.bea.alsb.coherence.impl.ConfigurationException: Error starting Coherence from cache configuration file /coherence/osb-coherence-cache-config.xml:
(Wrapped) java.lang.reflect.InvocationTargetException
at com.tangosol.util.Base.ensureRuntimeException(Base.java:293)
at com.tangosol.util.Base.ensureRuntimeException(Base.java:269)
at com.tangosol.net.CacheFactory.getServiceConfig(CacheFactory.java:1355)
at com.tangosol.net.CacheFactory.getCacheFactoryBuilderConfig(CacheFactory.java:1231)
at com.tangosol.net.CacheFactory.getCacheFactoryBuilder(CacheFactory.java:593)
at com.bea.alsb.coherence.impl.CoherenceProvider.<init>(CoherenceProvider.java:42)
at com.bea.alsb.coherence.impl.CoherenceProviderFactory.newInstance(CoherenceProviderFactory.java:21)
at com.bea.alsb.coherence.init.CoherenceAppListener.preStart(CoherenceAppListener.java:45)
at weblogic.application.internal.flow.BaseLifecycleFlow$PreStartAction.run(BaseLifecycleFlow.java:282)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.application.internal.flow.BaseLifecycleFlow$LifecycleListenerAction.invoke(BaseLifecycleFlow.java:199)
at weblogic.application.internal.flow.BaseLifecycleFlow.preStart(BaseLifecycleFlow.java:62)
at weblogic.application.internal.flow.HeadLifecycleFlow.prepare(HeadLifecycleFlow.java:283)
at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:613)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:184)
at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:58)
at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:141)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:39)
at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:191)
at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:21)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:165)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
Caused by: java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.tangosol.net.CacheFactory.getServiceConfig(CacheFactory.java:1350)
... 29 more
Caused by: (Wrapped: Failed to apply the element override: /tangosol-coherence-override-dev.xml) (Wrapped: Failed to apply the element override: /tangosol-coherence-override.xml) (Wrapped: Failed to apply the element override: /coherence/osb-coherence-override.xml) (Wrapped) java.io.IOException: Exception occurred during parsing: looking for id=10, found id=1((0,29,13) Name coherence.dtd)
at com.tangosol.util.Base.ensureRuntimeException(Base.java:293)
at com.tangosol.coherence.component.application.console.Coherence.loadOverrides(Coherence.CDB:83)
at com.tangosol.coherence.component.application.console.Coherence.loadConfiguration(Coherence.CDB:46)
at com.tangosol.coherence.component.application.console.Coherence.getServiceConfig(Coherence.CDB:14)
at com.tangosol.coherence.component.application.console.Coherence.ensureRunningLogger(Coherence.CDB:10)
at com.tangosol.coherence.component.application.console.Coherence.getSafeCluster(Coherence.CDB:14)
at com.tangosol.coherence.component.application.console.Coherence.getServiceConfig(Coherence.CDB:8)
... 34 more
Caused by: (Wrapped: Failed to apply the element override: /tangosol-coherence-override.xml) (Wrapped: Failed to apply the element override: /coherence/osb-coherence-override.xml) (Wrapped) java.io.IOException: Exception occurred during parsing: looking for id=10, found id=1((0,29,13) Name coherence.dtd)
at com.tangosol.util.Base.ensureRuntimeException(Base.java:293)
at com.tangosol.coherence.component.application.console.Coherence.loadOverrides(Coherence.CDB:83)
at com.tangosol.coherence.component.application.console.Coherence.loadOverrides(Coherence.CDB:64)
... 39 more
Caused by: (Wrapped: Failed to apply the element override: /coherence/osb-coherence-override.xml) (Wrapped) java.io.IOException: Exception occurred during parsing: looking for id=10, found id=1((0,29,13) Name coherence.dtd)
at com.tangosol.util.Base.ensureRuntimeException(Base.java:293)
at com.tangosol.coherence.component.application.console.Coherence.loadOverrides(Coherence.CDB:83)
at com.tangosol.coherence.component.application.console.Coherence.loadOverrides(Coherence.CDB:64)
... 40 more
Caused by: (Wrapped) java.io.IOException: Exception occurred during parsing: looking for id=10, found id=1((0,29,13) Name coherence.dtd)
at com.tangosol.run.xml.XmlHelper.loadXml(XmlHelper.java:120)
at com.tangosol.run.xml.XmlHelper.loadXml(XmlHelper.java:155)
at com.tangosol.coherence.component.application.console.Coherence.loadOverrides(Coherence.CDB:41)
at com.tangosol.coherence.component.application.console.Coherence.loadOverrides(Coherence.CDB:64)
at com.tangosol.coherence.component.application.console.Coherence.loadOverrides(Coherence.CDB:64)
at com.tangosol.coherence.component.application.console.Coherence.loadConfiguration(Coherence.CDB:46)
at com.tangosol.coherence.component.application.console.Coherence.getServiceConfig(Coherence.CDB:14)
at com.tangosol.coherence.component.application.console.Coherence.ensureRunningLogger(Coherence.CDB:10)
at com.tangosol.coherence.component.application.console.Coherence.getSafeCluster(Coherence.CDB:16)
at com.tangosol.coherence.component.application.console.Coherence.getServiceConfig(Coherence.CDB:8)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.tangosol.net.CacheFactory.getServiceConfig(CacheFactory.java:1350)
at com.tangosol.net.CacheFactory.getCacheFactoryBuilderConfig(CacheFactory.java:1231)
at com.tangosol.net.CacheFactory.getCacheFactoryBuilder(CacheFactory.java:593)
at com.bea.alsb.coherence.impl.CoherenceProvider.<init>(CoherenceProvider.java:42)
at com.bea.alsb.coherence.impl.CoherenceProviderFactory.newInstance(CoherenceProviderFactory.java:21)
at com.bea.alsb.coherence.init.CoherenceAppListener.preStart(CoherenceAppListener.java:45)
at weblogic.application.internal.flow.BaseLifecycleFlow$PreStartAction.run(BaseLifecycleFlow.java:282)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.application.internal.flow.BaseLifecycleFlow$LifecycleListenerAction.invoke(BaseLifecycleFlow.java:199)
at weblogic.application.internal.flow.BaseLifecycleFlow.preStart(BaseLifecycleFlow.java:62)
at weblogic.application.internal.flow.HeadLifecycleFlow.prepare(HeadLifecycleFlow.java:284)
at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:614)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:54)
at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:184)
at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:58)
at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:141)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:39)
at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:191)
at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:22)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:166)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)
... 3 more
Caused by: java.io.IOException: Exception occurred during parsing: looking for id=10, found id=1((0,29,13) Name coherence.dtd)
at com.tangosol.run.xml.SimpleParser.parseXml(SimpleParser.java:134)
at com.tangosol.run.xml.SimpleParser.parseXml(SimpleParser.java:71)
at com.tangosol.run.xml.SimpleParser.parseXml(SimpleParser.java:84)
at com.tangosol.run.xml.XmlHelper.loadXml(XmlHelper.java:116)
... 43 more
The error can be caused by one of the following:
1) The operational configuration file is invalid (see $DOMAIN_DIR$/config/osb/coherence/osb-coherence-override.xml)
2) The cache configuration file is invalid (see $DOMAIN_DIR$/config/osb/coherence/osb-coherence-cache-config.xml)> -
Budget Error at the time of Release of Purchase order
Hi,
We are using former budgeting and getting budget payment budget exceeding error at the time of releasing a carry forward PO.
PO has been successfully carried forward to next year and we are not making any changes in the PO. While releasing the same via ME28, system is giving budget exceeding error.
Screens shot is attached herewith for reference.
Thanks in advance.Hi Mar,
The root cause of the issue is incorrect updation of taxes value in EKPO table for that PO, which causes the system to consume less budget at the time of saving of PO.
Now while releasing the PO, system is checking for whole tax amount and sufficient budget is not available in the budget address.
Hope you able to connect the issue.....:P
Regards
Rohit Chopra -
Abap run time error at the time of GR
I am facing a ABAP run time error at the time of GR of STO through MIGO_GR, then abap run time error is generated, details are given as per the Tcode:- ST22;
Runtime Error MESSAGE_TYPE_X
ShrtText
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
Transaction
Transaction......... "MIGO "
Program............. "SAPLMBWL"
Screen.............. "SAPLMIGO 0001"
Screen line......... 15
Information on where terminated
The termination occurred in the ABAP program "SAPLMBWL" in
"MB_POST_GOODS_MOVEMENT".
The main program was "SAPLMIGO ".
The termination occurred in line 56 of the source code of the (Include)
program "LMBWLU21"
of the source code of program "LMBWLU21" (when calling the editor 560).
Source Code Extract
55 IF NOT sy-subrc IS INITIAL.
>>>>> MESSAGE ID sy-msgid TYPE x NUMBER sy-msgno WITH "385830
57 sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.Hi Tiwari,
The error seems to be triggered by note 385830. Pls refer to 'Note 556000 - Short dump due to note 385830' in www.service.sap.com
Btw, which version are you in?
Best Regards
Sathees Gopalan -
Error at the time of Release of Cost Estimate
Hi All,
During the relase of Costing Run, we encountered with below error:
Valuation data for material X190191302 is locked by the user SOOKKWANC
Message no. M3024
We are getting the same error at the time of CK24..also checked the log in of this user ID:SOOKKWANC but found that this user is not accessing any t-code.
Please help.
Thanks..
Regards,
VivekDear Vivek,
When releasing same material might be used in another transction by another user
At this point of time material gets locked
Kindly un-lock ( Delete ) the entries in SM12
Then proceed you issue will be solved
Regards
Madhu -
Error at the time of Terminating Service Contract
Getting the following error at the time of terminating the contract in Oracle Service Contracts Module.
OKC_CONTRACTS_REQUIRED_VALUE(COL_NAME=QP CALL FAILURE Routine"QP_PREQ_GRP.INSERT_LINE_ATTRS2 ORA-01400: cannot insert
NULL into ("QP".QP_PREQ_LINE_ATTRS_TMP_T"."VALUE_FROM"))
Thanks in advance.
RamHi Friends,
Is it that we can only have one no. range for service entry sheet even if there are 2 different company code in the same client.
Regards,
Wasim. -
I am getting the below dump error at the time of posting F-02.
Hi ,
Can any body help on the below issue .
I am getting the below dump error at the time of posting F-02.
Runtime Errors RAISE_EXCEPTION
Date and Time 26.08.2009 13:12:09
Short text
Exception condition "WRONG_PARAMETERS" raised.
What happened?
The current ABAP/4 program encountered an unexpected
situation.
Error analysis
A RAISE statement in the program "SAPLGLT2" raised the exception
condition "WRONG_PARAMETERS".
Since the exception was not intercepted by a superior
program, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
Trigger Location of Runtime Error
Program SAPLGLT2
Include LGLT2F07
Row 52
Module type (FUNCTION)Line SourceCde
22 E_SPLIT+000016(000010) = I_ACCIT-KOSTL .
23 ENDIF.
24 ENDIF.
25 IF NOT i_accit-PRCTR IS INITIAL.
26 E_SPLIT+000026(000010) = I_ACCIT-PRCTR .
27 ENDIF.
28 IF I_BS_FIELDS IS INITIAL.
29 IF NOT i_accit-PS_PSP_PNR IS INITIAL.
30 E_SPLIT+000036(000008) = I_ACCIT-PS_PSP_PNR .
31 ENDIF.
32 ENDIF.
33 IF NOT i_accit-SEGMENT IS INITIAL.
34 E_SPLIT+000044(000010) = I_ACCIT-SEGMENT .
35 ENDIF.
36 IF NOT i_accit-PARGB IS INITIAL.
37 E_PARTNER+000000(000004) = I_ACCIT-PARGB .
38 ENDIF.
39 IF NOT i_accit-PPRCTR IS INITIAL.
40 E_PARTNER+000004(000010) = I_ACCIT-PPRCTR .
41 ENDIF.
42 IF NOT i_accit-PSEGMENT IS INITIAL.
43 E_PARTNER+000014(000010) = I_ACCIT-PSEGMENT .
44 ENDIF.
45 E_BALANCE+000000(000004) = I_ACCIT-GSBER .
46 E_BALANCE+000004(000010) = I_ACCIT-PRCTR .
47 E_BALANCE+000014(000010) = I_ACCIT-SEGMENT .
48 E_SPL_PAR+000000(000004) = I_ACCIT-GSBER .
49 E_SPL_PAR+000004(000010) = I_ACCIT-PRCTR .
50 E_SPL_PAR+000014(000010) = I_ACCIT-SEGMENT .
51 ELSE.
>>>>> RAISE WRONG_PARAMETERS.
53 ENDIF.Hello,
I guess, you activated document splitting.
Please refer OSS note below,
Note 1295877 - RAISE_EXCEPTION when navigating to Cust. for doc. splitting
Note 985672 - Subsequently posting FI docs: Runtime error WRONG_PARAMETERS
Regards,
Burak -
Hi,
Windows 7 or Windows Server 2008 R2 domain join displays error "Changing the Primary Domain DNS name of this computer to "" failed...."
DC:windows Server 2008 R2
Domain functional level:Windows Server 2003
When Winxp join domain, have no this error message.
I checked http://support.microsoft.com/kb/2018583?wa=wsignin1.0 does't work.
There have 3 suggestion in this article:
1.The "Disable NetBIOS over TCP/IP" checkbox has been disabled in the IPv4 properties of the computer being joined.
Doesnt's work.
2.Connectivity over UDP port 137 is blocked between client and the helper DC servicing the join operation in the target domain.
On my DC, I run netstat -an, reslut as below:
UDP 192.168.20.3:137 *:*
3.The TCP/IPv4 protocol has been disabled so that the client being joined or the DC in the destination domain targeted by the LDAP BIND is running TCP/IPv6 only.
We are not using IPV6.
This server recently updated from Windows Server 2003 to Windows Server 2008 R2. Before upgrade, when Win7 and Win2008 join this domain, also have the same error message.
Please help to check this issue.
Thank you very much.
BR
Guo YingHuiHi Guo Ying,
I have faced this critical error which makes over-writes the host names in the domain when you join.
For example: Already you had a host name called as PC.domain.com in the domain.com Domain.
When you try to add the another host name called as PC in the domain.com Domain, it doesn't give you the duplicate name error on the network it does over-write the existing host name called as PC.domain.com & it will add the new host name into the domain.
Host name which got over-written will get removed from the domain. I faced this issue in my project. My DPM host name got removed from the Domain & new host name got joined into the domain which halted my backups for one day.
Final Resolution is as follows:
You need to start the dns console on the DC & drop down the domain name.
Select the _msdcs when you click on _msdcs it will show the Name Server's list on the right hand side.
You need to add the Domain Naming Master under the _msdcs or add all the domain controllers which you had.
After you add the Name server's try joining the PC OR Laptop to the domain which is successfully joins it.
Regards
Anand S
Thanks & Regards Anand Sunka MCSA+CCNA+MCTS -
Funds Mangement - Fund center derivation error at the time of PO/MIGO
Hello -
Generally ,If FM account assignements are available in purchase requisition , same should be carried to purchase order and to the good receipts. But I am getting an error at the time of PO or MIGO that " Fund center not derived'. Why this happening ? What can I do to avoid this problem. can I create a step in the derivation to keep the original FM assignments from the previous documents....is there something to do with field status??
Thanks in Advance
ChrisHi
Please read carefully tye warehouse concept
Excample warehouse concept II
>At PR no FM update
>At PO no FM update
>AT GR no FM update
>AT consumption on Cost center, WBS or Internal order FM is updated and AVC is checked
Read the release note of ERP 6 or ERP5 the customising of Warehouse concept is well explained
In sumary:
Create a stock commitment item statistically
Create a warehouse funds center
Create a funds
Create a derivation rule for warehouse concept 2
Create a derivation rule where you have plant, valuation class and warehouse funds center
Cretae a derivation rule fund>warehouse funds center>stock commitment item
Go in customising integration to make field status for assignement FM account asignments
Select PO and PR and make optional the funds, funds cenbter, commitment item
And when you will create a PR or PO FM data will come automatically
ciao
Salvator
PSM-FM Consultant
BXL -
Error at the time of PR creation
I am facing a Error at the time of PR creation:-
Status "Material Inactive" of material 30001668 does not allow external procurement
Message no. ME053
how to active the material.you have a material status in your material master, either at plant level or at general level.
Just remove the status.
Plant level status can be found in almost any plant view,
general level in general data view -
How to change the percentage of tax code on ftxp
i have wrongly enter the percentage of tax code while creating tax code in FTXP so plz suggest me how i can change it
Dear Saumya,
Reverse the accouting document which is already craeted for your invoice no., you FI consultant will help in doing so. After reversing the accouting entries update the Tax condition type with respective rate applicable and use update funcionality in VF02 and save the Invoice. This will solve your problem.
I would like to suggest to use posting block funcionality to minimize this issue if it occuring repeatitly.
If the solution proposed is helpfull please reward points and close.
Thanks.
Sumeet Sah
Maybe you are looking for
-
Can I install Windows 7 and Windows 8 to my MBA using Parallels and Bootcamp?
I have a Macbook Air (latest model, 11", i7, 256gb, 8gb ram, Mavericks). I need to have access to Windows 7 and 8 and have been toying with the idea of getting a cheap laptop but the problem is most new machines are Windows 8 and they won't allow you
-
Mail Will Not Receive After 10.6.2 Update
I just updated to 10.6.2 and now my mail program will not receive any incoming emails. I seem to be able to send however. I'm sorry for another one of these "me too" postings about the mail program not working post update but I'm hoping Apple will se
-
I get this error after updating ONONE premium edition 8 to 8.1 been to their site no luck in resoving error. I click ok to error PS cs6 still launches, just annoying. ONCoreFoundation7.dll is part of ONONE 7
-
Help decoding ByteArray from file
Hi guys, I was wondering if anybody could help me. I have a file that I am trying to parse, it is produced by an external piece of software that I have no control over, and the company that creates the software aren't been very helpful with giving me
-
Hi I have procured some material as ROH, but it has not been used for a long time so quality is reduced. I want to sell this material instead of sending back to vender or put into scrap. Is it possible to sell a raw material to some other customer. i