Display Ethernet not working

My display Ethernet is not working properly

Have you tried just 'resetting' the display by unplugging it from mains for a few minutes? I had a similar problem with my USB ports awhile back - unpluging teh display and waiting 4-5 minutes before plugging it back into pwer 'fixed' my problem.
Clinton

Similar Messages

Installed Premiere Pro CS4 but video display does not work?

I just got my copy of CS$. After installing Premiere I found two things that seem very wrong:
1) video display does not work, not even the little playback viewer next to improted film clips located on the project / sequence window. Audio works fine.
2) the UI is way too slow for my big beefy system.
My pc is a dual boot Vista-32 and XP system with 4GB of memory installed and nvidia geforce 280 graphics board with plenty of GPU power. The CS4 is installed on the Vista-32 partition. My windows XP partition on the same PC with Premiere CS2 works great and real fast.
Any ideas how to solve this CS4 install issue?
Ron

I would like to thank Dan, Hunt, and Haram:
The problem is now very clear to me. The problem only shows up with video footage imported into PP CS4 encoded with "MS Video 1" codec. So this seems to be a bug. The codec is very clearly called out and supported within various menues but video with this codec just will not play in any monitor or preview window. In addition the entire product looks horrible with respect to performance while PP CS4 trys its best to play the video. Audio will start playing after about 30 seconds. And once in awhile part of video shows up at the wrong magnification before blanking out again.
My suggestion to the Adobe team: fix the bug and add some sample footage to the next release so new installations can test their systems with known footage.
My PC is brand new with the following "beefy" components:
Motherboard
nForce 790i SLI FTW
Features:
3x PCI Express x16 graphics support
PCI Express 2.0
NVIDIA SLI-Ready (requires multiple NVIDIA GeForce GPUs)
DDR3-2000 SLI-Ready memory w/ ERP 2.0 (requires select third party system memory)
Overclocking tools
NVIDIA MediaSheild w/ 9 SATA 3 Gb/sec ports
ESA Certified
NVIDIA DualNet and FirstPacket Ethernet technology
Registered
CPU: Intel Core 2 Quad Q9550
S-Spec: SLAWQ
Ver: E36105-001
Product Code: BX80569Q9550
Made in Malaysia
Pack Date: 09/04/08
Features:
Freq.: 2.83 GHz
L2 Cache: 12 MHz Cache
FSB: 1333 MHz (MT/s)
Core: 45nm
Code named: Yorkfield
Power:95W
Socket: LGA775
Cooling: Liquid Cooled
NVIDIAGeForce GTX 280 SC graphics card
Features:
1 GB of onboard memory
Full Microsoft DirectX 10
NVIDIA 2-way and 3-way SLI Ready
NVIDIA PureVideo HD technology
NVIDIA PhysX Ready
NVIDI CUDA technology
PCI Express 2.0 support
Dual-link HDCP
OpenGL 2.1 Capaple
Output: DVI (2 dual-link), HDTV
Western Digital
2 WD VelociRaptor 300 GB SATA Hard Drives configured as Raid 0
Features:
10,000 RPM, 3 Gb/sec transfer rate
RAM Memory , Corsair 4 GB (2 x 2 GB) 1333 MHz DDR3
p/n: TW3X4G1333C9DHX G
product: CM3X2048-1333C9DHX
Features:
XMS3 DHX Dual-Path 'heat xchange'
2048 x 2 MB
1333 MHz
Latency 9-9-9-24-2T
1.6V ver3.2

Mac Mini + A1038 Cinema Display does not work

Hi,
I have a 2009 model Mac Mini with mini-dvi and mini-display port's on the rear. I can connect any of my DVI based monitors to the mac mini using either the mini-dvi to dvi cable or the mini-displayport to dvi cable. All monitors except for the A1038 model Apple Cinema Display.
The cinema display works with 3 other computers with DVI ports, turns right on and is detected right away. When plugged into the mini it does nothing. Sometimes I can get it to work with the mini-dvi to dvi adapter but that is sporadic.
This is the same behavior with a 2009 model mac book pro and macbook. Using the mini-displayport to dvi cable the cinema display does not work but 3 other monitors do.
So my question is, why does apple hardware only work with non-apple hardware?

Is the A1038 the old, plastic Cinema Display that doesn't have a power cord or power supply? It only has a video cable with the special ADC on it? If that's the case, it needs this to run from a newer Mac:
http://store.apple.com/us/product/M8661LL/B

My ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix

my ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix, other than take it to apple.
thanks!

The wish list only works on apps you have to pay for. To get it tap the icon of the app you want to save. After it opens at the upper right corner is a box with a arrow. Tap that then tap add to wish list list in the box that opens.

Ethernet not working on brand new portable

Ethernet not working. This is a new portable.
Troubleshooting message: The realtek PCIe GBE family controller adapter is experiencing driver or hardware related problems.
Reinstalled the driver multiple times .
Reinstalled the portable to factory default.
Only one ethernet controller driver available for this portable on the HP site so i used that one.

Hi:
The only suggestion I can offer would be to try the driver directly from Realtek. Fourth file on the list.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=13&PFid=5&Level=5&Conn=4&DownTy...
If that fails to do the job, I recommend you either return the PC if you can, or contact HP technical support and submit a support case under the warranty.

My thunderbolt display is not working with my MBP retina 13''

Hi,
     I just received both a new macbook pro retina 13'' and a thunderbolt display. Everything was working properly yesterday but today, I have no clue why, the thunderbolt display is not working anymore.
     . the power supplier for my laptop given by the thunderbolt display is still working;
     . when I don't connect my laptop through the thunderbolt connection, I can use the usb sockets as power supplier , for my phone, for instance;
     . as soon as I plug the thunderbolt cable, the usb socket is not feeding any more my phone, whereas the screen is not displaying anything.
     . If I take a look in the system report, in the thunderbolt tab, there is "no device connected"...
I restarted plenty of time my laptop, took care to reinitialise the SMC as well as the PRAM, and nothing changed. I also disconnected the thunderbolt display, waited few minutes (and more), but nothing changed, again the black screen.
Has somebody an idea?
Thanks

which model air do you have?
try both a pram and smc reset
plug the monitor into a different electrical outlet and a different port on your Mac (if you have multiple tb ports)

HT6114 I just updated the last version of OS X Mavericks on my Mac Pro and my Thunderbolt display is not working correctly

I just updated the last version of OSX Mavericks on my MAc Pro and my thunder bolt display is not working correctly. Could you please help

Reset the NVRAM/PRAM and Reset the SMC, then try again.

Thunderbolt ethernet not working when computer wake up from sleep.

thunderbolt ethernet not working when computer wake up from sleep.
it will not happen in Mountain loin.

I had this problem on SL and on Lion as well, and it occures for WiFi and Ethernet connections.
In fact the internet connection was not broken as I could ping the destination usin the IP (not DNS name).
In this case the problem was related to mDNSResponder task which handles all dns queries.
It was the most frequent problem in my day to day work with SL and now Lion. It was never fixed by any patch from Apple. I tried almost all voodoo including fresh install, all possible config changes - no solution.
The only version with no problems related to network was 10.5.8. All the other versions had issues of different kind (WiFi instability (lost signal), DNS problems (for wireless and wired connection) sometimes associated with machine sleep and wake up and sometimes with no reason.
QUESTION: Is your problem independent of the access point / router you connect to.
I must say networking was (and still is) the weakest part, besides the other OS X weaknesses I experienced during 4 years of OS X usage.
No problems in the same network with Linux or Windows beeing ran natively on my iMac So hardware is OK.
Software is of poor quality. Not much more to say in this matter.
I found a very interesting article dated 1996 about programming which I think is still valid.
Link to the article: http://www.fastcompany.com/magazine/06/writestuff.html
Below the fragment (with some connection to Apple)
Software is everything. It also s***s.
"It's like pre-Sumerian civilization," says Brad Cox, who wrote the software for Steve Jobs NeXT computer and is a professor at George Mason University. "The way we build software is in the hunter-gatherer stage."

New Problem, Old Issue. Ethernet not Working

You may recall this thread: http://forums.verizon.com/t5/FiOS-Internet/FIOS-Ethernet-not-working-Wireless-works-fine/td-p/203838
If you do, well, I have the same issue once more. It's driving me a bit nuts, to be perfectly honest.
About 10 days ago I finally had a stable ethernet connection on my Desktop machine to the internet. 8 days ago I marked the other thread as solved as it was still working and thought that my problems had been solved. Unfortunately, here I am 10 days later and suddenly, without warning, the ethernet connection on my Desktop loses internet connectivity.
I tried turning the router off and then turning it back on, but none of that worked.
Right now it switches between two different states without little indication as to why it switches between them except that it tends to only do it as a I unplug the cable and then plug it back in. The two states are simply connecting to an "Unidentified Network" which is much the same as the problem I had before, and connecting to an "Unidentified Network" with "Internet Access", except, none of the applications that use internet on the computer actually have Internet access even in this state. The Unidentified Network is the key to knowing I still don't truly have internet access.
Windows Firewall is off. It's actually been off for awhile now because I forgot to turn it back on after I initially shut it off trying to get it to connect before. Windows 7 (64-bit) is up-to-date, so that's not the issue either. But something is at issue here and I'm not sure what it is. Since the Wireless works, and the Desktop downstairs works on the ethernet, I can only assume it's something with this Desktop. But I'm not sure what it is or why it's doing this.
Any help with isolating the problem so I can actually fix it and not wait almost two weeks for it to magically work again would be immensely appreciated. Thank you.

Hello there Viafax and Spacedebris!
Apologies for not responding sooner. I decided to take a look at a Windows 7 support forum to see if the issue was something specific to that. After explaining in detail, I got this post and I followed the steps. I posted the information I got and then tried the duplex thing.
The default setting it seems is "Auto Negotiation" which obviously wasnt working.
I tried 100 Mbps Half Duplex and suddenly I had a connection. I can connect to the internet on my Desktop! So I tried 100 Mbps Full Duplex and.... no connection.
So, right now it's set to Half Duplex. But I don't even understand why it would need to be Half instead of Full, or the benefits or disadvantages to either. Right now it's working, but I wish I understood more.
The 192.168.1.25 may have been a typo, since I set the device to run off a static IP of 192.168.1.125, to my knowledge no device on the network has 192.168.1.25
But other than that brief typo, I do believe the rest of the information is as accurate as I could make it. I typed it as I looked for it, so even if it seems odd, that's what it was.

My iphone 4 fell down from 3 feet height and display is not working now, phone is functioning with calls and messages etc.. except no display :( please advise me a corrective action...

my iphone 4 fell down from 3 feet height and display is not working now, phone is functioning with calls and messages etc.. except no display please advise me a corrective action...

Take it to an Apple Store and see about getting an out of warranty replacement. I believe it will run you about $150.

Ethernet not working with 10.10.1

Just upgraded to 10.10.1 with my iMac. The ethernet port is unavailable. Wireless works. Tried a PRAM reset and deleting the network configuration. Still Ethernet not working. Ideas?

I suggest you ask this in the Yosemite Forum

The ethernet port on the thunderbolt display is not working

The ethernet is working when the cable is connected directly to my mac laptop but when connected the thunderbolt display there is no connection. Is there some type of set up for the ethernet connection or can this port just be broken?
Thanks for the help!

Afterthought on an older post: it isn't immediately clear that the Ethernet port on the Thunderbolt Display works through the "Display Ethernet" interface, rather than through the "Thunderbolt Ethernet" interface. The latter was already present in the list of network interfaces in Network Preferences, while the former had to be added via the + button --- at least that was the case when I installed the TB display to work with my 15-inch MacBook Pro Retina this week.
The AppleCare rep didn't know the difference either and agreed with me that it was puzzling that using the Thunderbolt Ethernet adapter on the Thunderbolt port of the display did work, wheras using the Ethernet port directly didn't (even though there were lights flashing on the Ethernet port of that other computer I tried to connect to in Internet Sharing mode). Close reading of the above posts made me go look for that mysterious "Display Ethernet" interface... thank you Clinton!

17" LCD Cinema Display does not work on G4 Tower with ATI 9000

Hi,
I have a G4 Tower with the original AGP ATI Radeon 9000B video card. My friend gave me this unit just recently but not the original monitor. Well after he got his new 30" Cinema Display he gave me the original 17"LCD Cinema Display. I was so happy, plugged it into the card and fired up the CPU but nothing! just blank! It is not getting any power for the USB ports or anything. My buddy says the monitor was checked before I picked it up. I yanked the Video card out and put it back in, inside the CPU was clean as was the card, put it back together and still nothing. The VGA monitor I have is connected via adapter to the other input and works fine. I tried doing display settings and the Cinema is not even detected. Is the Video card fried on the digital side?
Do I need a new one?
Here is the info on the CPU:
Machine Model: Power Mac G4 (AGP graphics)
CPU Type: PowerPC G4 (2.9)
Number Of CPUs: 1
CPU Speed: 400 MHz
L2 Cache (per CPU): 1 MB
Memory: 1.5 GB
Bus Speed: 100 MHz
Boot ROM Version: 4.2.8f1
Serial Number: XB0120xxxxx
Any help wold be appreciated.

Hi MFG,
Welcome to the discussions.
The G4 AGP Graphics model originally shipped with an ATY Rage 128 graphics card. The ATI Radeon 9000 graphics card that is installed in your G4 is not the original card.
The ATI Radeon 9000 comes with a native ADC port (which you are trying to use). This port is only fully functional if the computer is ADC enabled. Your model of G4 is, unfortunately, not ADC enabled.
You can confirm this by opening the computer and having a look at the AGP slot (where the graphics card is installed). In ADC enabled Macs, there is an extra slot at one end of the AGP slot to accomodate an "extra leg" that the ADC graphics cards (such as the ATI 9000) have. This extra leg supplies the power and USB feed. You'll probably find this extra leg with no slot for it to go into.
What this means is that you are not getting power and USB feed through the ADC port to your display.
If you want to get the 17" ADC Apple LCD display working off this card (it's definitely the LCD display and not the CRT display, please confirm), you will need to use a DVI to ADC adaptor such as this one:
http://www.drbott.com/prod/db.lasso?code=0111-DVAD
and run it off the DVI output.
You can run your VGA screen at the same time (if you want to) off the ADC output by using this adaptor:
http://www.drbott.com/prod/db.lasso?code=0117-ADCV
This will work off the ADC port because, although the ADC port is not getting USB or power feed, it's still getting the DVI feed (which is what this adaptor needs).
Cheers!
Karl

Keyboard plugs into the back of my display does not work? but when I plug the keyboard into my MacBook Pro it works fine? is it my display Monitor?

My keyboard plugs into the back of my display monitor it does not work? but when I plug the keyboard into my MacBook Pro it works fine? is it my display Monitor?

Try:
- Resetting the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Resetting network settings: Setting>General>Reset>Reset Network Settings

Target Display Mode not working iMac 27(2012) Bootcamp to iMac 27(2013)

Hi All,
I recently purchased an iMac 27" 2013 which replaced my iMac 27" 2010.
===============
PREVIOUS SETUP
===============
(1) iMac 27" 2012 - Running Windows 8.1
(2) iMac 27" 2010 - Running OS X Mavericks
(1)+(2) were connected with a Mini-Display-Port cable.
(1) was using (2) as external display while (2) was set to Target Display Mode using CMD+F2
==============
CURRENT SETUP
==============
(1) iMac 27" 2013 - Running Windows 8.1
(2) iMac 27" 2012 - Running OS X Mavericks
(1)+(2) are connected with Thunderbolt cable.
(1) can't use (2) as external display anymore becuase CMD+F2 has no effect anymore on (2) in this scenario.
If (1) and (2) are both running OS X all works as expected.
I am aware about the support hint from Apple where they state TDM is not working under Bootcamp.
And I agree, while booted into Windows Bootcamp this machine can't serve as external display. Makes sense because TDM is baked into OS X display drivers.
Anyone had the same experience and came to a soltuion?
Thanks,
Martin

"Apple has no plans to implement a client driver for Windows since there is no Thunderbolt SW stack available for Windows like there is for Display Port."
That is a little bit funny since Gigabyte and other big companies have said that 2014 is the year that they are going to implement Thunderbolt in many motherboards.
"GIGABYTE 7 series motherboards are the very first to offer fully certified dual onboard Thunderbolt™ ports. Capable of connecting up to 12 devices plus 3 digital displays simultaneously with breathtaking data transfer speeds that can transfer 1TB of data in only five minutes, GIGABYTE Thunderbolt™ motherboards offer the fastest connection interface on the desktop PC."
Have you asked Apple about that? I dont understand why Apple is crippling Thunderbolt on their devices...

Display Ethernet not working

Similar Messages

Maybe you are looking for