Display: family specific matching fails

After previous update my MBP shows BSOD always after installing new SU.
The system.log says:
May 26 03:27:57 localhost kernel[0]: Jettisoning kernel linker.
May 26 03:27:57 localhost kernel[0]: Resetting IOCatalogue.
May 26 03:27:57 localhost kernel[0]: display: family specific matching fails
May 26 03:27:57 localhost kernel[0]: Matching service count = 0
May 26 03:27:57 localhost kernel[0]: Matching service count = 1
May 26 03:27:57 localhost kernel[0]: Matching service count = 1
May 26 03:27:57 localhost kernel[0]: Matching service count = 1
May 26 03:27:57 localhost kernel[0]: Matching service count = 1
May 26 03:27:57 localhost kernel[0]: Matching service count = 1
May 26 03:27:57 localhost kernel[0]: display: family specific matching fails
May 26 03:27:57 localhost kernel[0]: Previous Shutdown Cause: 3
May 26 03:27:57 localhost kernel[0]: mac 10.3 phy 6.1 radio 10.2
May 26 03:27:57 localhost kernel[0]: IPv6 packet filtering initialized,
default to accept, logging disabled
May 26 03:27:57 localhost memberd[41]: memberd starting up
May 26 03:27:57 localhost mDNSResponder-108.5 (May 9 2007 15: 07:55)[34]:
starting
May 26 03:27:57 localhost lookupd[43]: lookupd (version 369.6) starting - Sat
May 26 03:27:57 2007
May 26 03:27:58 localhost configd[38]:
com.apple.SystemConfiguration.DynamicPowerStep load failed
May 26 03:28:00 localhost kernel[0]: yukonosx: Ethernet address
00:16:cb:8d:e7:8c
Do you know what may caouse this? Its not a big deal since after second restart everything works, but it is kind of annoying.
MBP 2Ghz CoreDuo Mac OS X (10.4.9)

My system.log shows:
Jun 4 23:09:24 localhost kernel[0]: Jettisoning kernel linker.
Jun 4 23:09:24 localhost kernel[0]: Resetting IOCatalogue.
Jun 4 23:09:24 localhost kernel[0]: Matching service count = 1
Jun 4 23:09:24 localhost kernel[0]: Matching service count = 2
Jun 4 23:09:24 localhost kernel[0]: Matching service count = 2
Jun 4 23:09:24 localhost kernel[0]: Matching service count = 2
Jun 4 23:09:24 localhost kernel[0]: Matching service count = 2
Jun 4 23:09:24 localhost kernel[0]: Matching service count = 2
Jun 4 23:09:24 localhost kernel[0]: NVDANV10HAL loaded and registered.
Jun 4 23:09:24 localhost kernel[0]: IPv6 packet filtering initialized, default to accept, logging disabled
Jun 4 23:09:24 localhost DirectoryService[51]: Launched version 2.1 (v353.6)
Jun 4 23:09:25 localhost kernel[0]: UniNEnet: Ethernet address 00:30:65:ab:a5:50
Jun 4 23:09:26 localhost kernel[0]: NVDA,Display-B: vram [98000000:08000000]
Jun 4 23:09:29 localhost configd[43]: AppleTalk startup
Jun 4 23:09:29 localhost configd[43]: setting hostname to "localhost.local"
Jun 4 23:09:30 localhost mDNSResponder: Adding browse domain local.
Jun 4 23:09:32 localhost lookupd[138]: lookupd (version 369.5) starting - Mon Jun 4 23:09:32 2007
Jun 4 23:09:34 localhost configd[43]: target=enable-network: disabled
Jun 4 23:09:35 localhost configd[43]: AppleTalk startup complete
Which might be a problem with your video card or display. Since it's a MBP, I'd contact AppleCare or take it into an Apple Store. Good luck

Similar Messages

Literally hundreds of "family specific matching fails"

I have my Mac set to boot up in "verbose". Today I restarted because the My Book firewire locked up (restarting fixed it). As the OS booted, I saw literally hundreds of "family specific matching fails" messages, separated in blocks of 10 or more, for everything from USB ports to the Apple keyboard to stuff I didn't even recognize. I'd say there were more "FSMF" lines than all the other booting lines combined. Is this normal? Is it a sign of something gone wrong?
Thanks in advance.
PS If you need a copy of a log or something, please tell me where to look and/or how to enable logging of the boot text.

The answer may be in your message:
(A) . . . the My Book firewire locked up;
(B) family specific matching fails
The two are almost certainly related and the matching appears to relate to devices that the system may not be able to find (temporarily, perhaps).
Perhaps some drivers are causing problems: have you installed new hardware recently? I would restart with as little hardware connected as possible and see what happens then. I would also consider some maintenance routines: at least booting with the system disk and running the repair utility; perhaps even buying Disk Warrior (good for a standby anyway -- when you need it, it is to late).
Any logs needed are in Console, in the Applications>Utilities folder.
Why on earth start up in Verbose mode?

IGPU: Family Specific Matching Fails

Dmesg shows this in it:
*IGPU: family specific matching fails*
I personally don't like the sound of the word fails, makes me think something might wrong and I can't find any answers online anywhere to this.
I would greatly appreciate some insight into this...
THANKS

I've heard someone say it's when the OS is booting up and it's looking at the hardware and the graphics isn't ready and the OS doesn't know what it is, so it gives a failure reply, like I don't know what this is, type of a message...

Family specific matching fails......

Hmm, i guess I must have posted this problem to the "admin" forum by mistake. so rather than repost it i summarize briefly:
I have been having a crash problem and it seems to be getting worse.
GEAR--I have a G4 AGP, with 8xxRAM 1.3giggle cpu three firewire devices, Maxtor HD, buffalo HD and lacie dvd burner (multi recorder). I upgraded the internal DVD to a Samsung burner a long while ago. I am using OS 10.4.10
This problem showed up about 3 days ago, and the only thing i have been doing differently is that I recently started to work with some "invisible files" for a web server project. I have been using Text Edit; PageSpinner; various browsers, Safari, IE, Firefox, and all of these apps are up to date. (sept 18)it bit twice: once earlier in the afternoon; Finder froze up when I selected a different HD to open a file. It then crashed after a period of the SBBodeath. Then this evening I was trying to get a path correct to a file with Explorer while I had several safari windows open, and Terminal and PageSpinner. When everything started popping off I tried to open console and it too ditched out.
I have run fsck with single user start up each time after these crashes and I got a bizarre message(s) repeated for 10 or 20 lines: "IOUSB Interface: family specific matching fails". This _family specific matching fails_ part of the message is repeated for +almost every+ peripheral device: hard drives, scanner, mouse and keyboard. Yesterday I had a long session without any crash
the crash log snippets are over at:
http://discussions.apple.com/message.jspa?messageID=5378484#5378484
Yesterday late and first thing this morning I did a "single user" start and fsck and surprise surprise "mr family specific fail" showed up again.
what does this mean?
best regards, vilppu

Have you tried repairing permissions & your disk from your Tiger DVD?
Check for your model G5 iMac to determine if it qualifies for any of the following Apple repair programs.
iMac G5 Repair Extension Program for Video and Power Issues
The 20-inch iMac G5 Repair Extension Program for Power Supply Issues (Rev B)
**WARNING: DUE TO SECURITY REASONS, PLEASE DO NOT POST YOUR COMPUTER'S SERIAL NUMBER ON THESE MESSAGE BOARDS.**

ITunes Match fails to match recently ripped CD. Can I avoid matching this CD?

I have a CD from a band that is not available on iTunes that I've loaded to my MacBook Pro. As expected iTunes Match can't match this album. As a result, iTunes Match fails to proceed past the third step of the matching process and continously loops. How can I stop this album from being part of the match process?

Hi,
What format have you ripped the CD? There are problems with some ALAC and AIFF files.
If the cd is in your iTunes library, there is no way of stopping match process. Once cd has been uploaded there is a workaround to make remove the tracks from the cloud and not your library.
However, to resolve your current problem you may need to delete the tracks.
Jim

During an update of the applications on the BlackBerry smartphone an error message may be displayed "BlackBerry Desktop Software failed to validate your BlackBerry device update - Aborting install due to validation failure. Some packages contained unsatis

I have reset both my torch and playbook back to original only thing that I kept was my contact. And still problems I am a few min away from leave my loved blackberry and going android !! Or heaven help us Phone
Issues 1) playbook wont connect to desktop manager anymore
2) Play book has 2 calendar icons with two different settings on them ??? I have one that is currently working with my yahoo email and calendar account.
3) my Phone when connected to desk top software shows the calendar as read only
4) Unable to update my phone says During an update of the applications on the BlackBerry® smartphone an error message may be displayed "BlackBerry Desktop Software failed to validate your BlackBerry device update - Aborting install due to validation failure. Some packages contained unsatisfactory dependencies."
I just want my email and Calendars to work I am tried of spending nights trying to get these deices working !!!
someone please help me. !!
I know you are going to ask I have updated everything last time and it is all as update as it can get.
As for now as I wait I am going to wipe my phone again and just set everything up again !! If I have to even my contacts AHHHH Help I am starting to think crazy thoughts

Did you try to eboot the your PC or laptop where your device is connected ?
I experienced this with my windows laptop, after a failed to do an update, I restart the laptop and my Torch, then retried, and it's worked

How to capture the DB Errors to display more specific error on the screen

HI,
How to capture the DB Errors to display more specific error on the screen?
Can any one suggest on this please.
Thanks

hi,
in your db package or procedure write this in ur exception handler
as
excpetion when others
FND_MSG_PUB.ADD_EXEC_MSG (pkg_name, proc_name,
substr(sqlerrm, 1, 240))
now in your java code you can catch and throw this excpetion by using
OAExceptionHelper.checkErrors (Tx, messageCount, returnStatus, messageData);

How to display records that match user input date

hi all,
i need to display records that match user input date (i.e., for example if the difference between user input date and record date is less than 5 years then display those records) , this is for hr bw. any exit is there to check for validation for records to be displayed based on some abap coding.
vijay

I just see getApplication method but "Retrieves a list of all the deployed applications."
My scenario is: I get user, end i want to discorver how application this user i enable to see.

Query to display the exact match product at top or increase the nearness

Hello All,
I am using the iStore search and it is returning results for Part Number and Description search. If I am searching a particular Part Number , it is displaying the particular product and its related products. I need the exact matched product in the first row (topmost).
When I checked the back-end query, It is using contains for powerful search.
How can I display the exact match product at top or increase the nearness in search.
Please help.
I have seen a similar thread in the forum.
Contains: exactly match
Thanks in advance,
Muhammed Aslam
Edited by: tpmuhammedaslam on Jan 10, 2013 3:48 AM

Hello Muhammed Aslam,
If fuzzy search is enabled, then cannot search by part number.
The seeded query for iStore product search is based on the description as follows:
Product Search (Section Search - R12)
select * from
(select T.*, RowNum as row_num
from (select inv_item_id INVENTORY_ITEM_ID
,description DESCRIPTION
,0 CATEGORY_ID
,nearness NEARNESS
,concatenated_segments CONCATENATED_SEGMENTS
,primary_uom_code PRIMARY_UOM_CODE
,primary_unit_of_measure PRIMARY_UNIT_OF_MEASURE
from (SELECT * FROM (select /*+ FIRST_ROWS leading(i) INDEX (x,IBE_SECTION_SEARCH_U1) */
distinct i.inventory_item_id, i.description, 0
,x.inventory_item_id inv_item_id, score(100) nearness
,mtl_system_items_b_kfv.concatenated_segments,
mtl_system_items_b_kfv.primary_uom_code,
mtl_system_items_b_kfv.primary_unit_of_measure
from ibe_ct_imedia_search i,ibe_section_search x
,mtl_system_items_b_kfv
where contains (i.indexed_search, :1 , 100) > 0
and i.language = userenv('LANG')
and i.organization_id = :2
and i.web_status='PUBLISHED'
and x.inventory_item_id = i.inventory_item_id
and i.inventory_item_id = mtl_system_items_b_kfv.inventory_item_id
and i.organization_id = mtl_system_items_b_kfv.organization_id
and x.minisite_id = :4
and x.organization_id =:5
order by nearness desc ) WHERE rownum < :6
))T
where rownum where row_num >= :8
Product Search (Category Search - R12)
select * from
(select T.*, RowNum as row_num
from (select inventory_item_id INVENTORY_ITEM_ID
,description DESCRIPTION
,category_id CATEGORY_ID
,nearness NEARNESS
,concatenated_segments CONCATENATED_SEGMENTS
,primary_uom_code PRIMARY_UOM_CODE
,primary_unit_of_measure PRIMARY_UNIT_OF_MEASURE
from (select i.inventory_item_id, i.description, i.category_id
,score(100) nearness
,mtl_system_items_b_kfv.concatenated_segments
,mtl_system_items_b_kfv.primary_uom_code
,mtl_system_items_b_kfv.primary_unit_of_measure
from ibe_ct_imedia_search i,
mtl_system_items_b_kfv
where contains (i.indexed_search, :1 , 100) > 0
and i.language = userenv('LANG')
and i.web_status='PUBLISHED'
and i.organization_id = :3
and exists (select 1
from ibe_dsp_section_items s,ibe_dsp_msite_sct_items b
where s.section_item_id = b.section_item_id
and b.mini_site_id = :4
and s.inventory_item_id = i.inventory_item_id
and (s.end_date_active > sysdate or s.end_date_active is null)
and s.start_date_active < sysdate)
and rownum < :5
and i.inventory_item_id = mtl_system_items_b_kfv.inventory_item_id
and i.organization_id = mtl_system_items_b_kfv.organization_id
order by nearness desc ))T
where rownum where row_num >= :7
Regards,
Debbie

Gatekeeper tech/zone match failed

Hi
Im a little rusty on gk's hence my post. Basically we have a few h323 endpoints registered to our gatekeeper, the registration is active and all is well for external pstn and IP calling...The problem is receiving external pstn calls to the endpoint. It doesnt connect to the device and forwards the call to our mcu unit. The endpoints do not have isdn connectivity directly, this happens through a dedicated video gateway with a range configured.
I can see the fault, I ran the command gatekeeper main 10 (see below)
Feb 14 13:55:10.114: gk_process: SOCKET_EVENT fd (1) event (1)
Feb 14 13:55:10.114: gk_process_read_event: Recd event from altgk
Feb 14 13:55:12.746: gk_process: QUEUE_EVENT (minor 0) wakeup
Feb 14 13:55:12.746: gk_rassrv_arq: arqp=0x45E076F0, crv=0x5F8E, answerCall=0
Feb 14 13:55:12.746: gk_rassrv_sep_arq: ARQ Didn't use GK_AAA_PROC
Feb 14 13:55:12.746: gk_dns_query: No Name servers
Feb 14 13:55:12.746: rassrv_get_addrinfo: (706) Tech-prefix match failed.
Feb 14 13:55:12.746: rassrv_get_addrinfo: (706) unresolved zone prefix
Feb 14 13:55:12.746: gk_rassrv_sep_arq: rassrv_get_addrinfo() failed (return code = 0x103)
Feb 14 13:55:12.750: gk_process: QUEUE_EVENT (minor 0) wakeup
Feb 14 13:55:12.750: gk_rassrv_arq: arqp=0x473ECF64, crv=0x14A5, answerCall=0
Feb 14 13:55:12.750: gk_rassrv_sep_arq: ARQ Didn't use GK_AAA_PROC
Feb 14 13:55:12.754: gk_dns_query: No Name servers
Feb 14 13:55:12.754: rassrv_get_addrinfo: (706) Tech-prefix match failed.
Feb 14 13:55:12.754: rassrv_get_addrinfo: (706) unresolved zone prefix
Feb 14 13:55:12.754: gk_rassrv_sep_arq: rassrv_get_addrinfo() failed (return code = 0x103)
Feb 14 13:55:16.658: gk_process: QUEUE_EVENT (minor 0) wakeup
conf
The get addrinfo does not match the tech-preifx and has a unresolved zone prefix. I changed the e164 to 706 number quickly to test incoming pstn calls and it connected ok, i cant keep the e164 at 706 ( it actually needs to be 3768) - what do i need to change so incoming calls can be handed off direct to the endpoint thus establishing a call?
Summary with example...e1 with range 6357XX to 6357XX plugged directly into 3526 Cisco gateways which is registered to gatekeeper for call handling. incoming call made to endpoint is 635706 doesnt get matched in gk and hands off to MCU. how do i change this!!!!
Thanks guys!!!

Thanks for your Reply!
I tried to enable the publisher. But i get the following error
root@sol208:~# pkg set-publisher -e solaris
pkg set-publisher: Could not refresh the catalog for solaris
Unable to contact valid package repository
Encountered the following error(s):
Unable to contact any configured publishers.
This is likely a network configuration problem.
Framework error: code: 7 reason: Failed connect to 172.26.4.174:80; Connection refused
URL: 'http://172.26.4.174:80'. (happened 4 times)
root@sol208:~#
Please help to resolve this.
Thanks,
Girish

MMS - Search MMS term - Getting Error- "Get Matches Failed"

Hi,
When i search for a MMS term in the termstore manager i am getting an error saying "The Server method 'Get Matches' failed"
What could be reason?
Any one can help on this issue
Smile Always

Hi,The issue could be of many reasons,please check the link below that provides more information on the issue and the solution of this.
1.Ensure that the IIS Admin service is running in services.msc
2.Ensure that the ApppPool related to the service is running
3.Ensure that the DB server that application is located is running and have enough space.
4.Ensure that the Apppool is set with the correct credentials and password
http://expertsharepoint.blogspot.de/2014/08/managed-metadata-service-or-connection.html
Anil Avula[Partner,MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/

ITunes MATCH fails to load on iPhone4 after updating to IOS 6

iTunes MATCH is failing to fully load (display) on 1 of my 2 iPhone4 telephones after updating both to IOS 6. (My wife and I share the iTunes MATCH library using the same ID).
I have tried Signing Out and back In to iTunes, plus I have tried turning iTunes MATCH On & Off for this one iPhone 4 device, but the iTunes MATCH still fails to load.
The furtherest it ever gets is to display my previous Playlists and my Artists, Albums, etc that are in the cloud ...but the actual songs that are in the MATCH cloud never ever appear at all ...even after waiting hours!
The IOS 6 update seemed to work fine for both of our iPhone version 4 phones, but like I said above, only 1 of the phones is able to play music from iTunes MATCH now. This previous worked fine under IOS 5.1 for almost a year.
We also own an Apple TV 2nd generation and an iMAC with OS X 10.6.x, ...and those 2 device are also able play music that we have stored in the iTunes MATCH cloud with No Problem.
The issue seems to be with only this one phone.
Has anyone else experienced this? Does anyone have a suggested fix for this?

This helped me my repair my iPhone4's locally corrupted iTunes library (which calls my iTunes Match account) for all my music and music-video collection! It took all of 5 minutes to repair.
1. Google/download/install iExplorer (free program).
2. Plug in iPad or iPhone first, then open iExplorer.
3. Delete the iPad\Media\iTunes_Control folder's 3 Media SQL files.
4. Turn on iCloud/match in iPhone's (iPad's) iOS settings, which replaced the iPads music library with iCloud
A big THANK YOU to Michael Allbritton for pointing my in the direction of this solution!
Finally a note to Apple:
You will have to incorporate a way for users to view and self-repair the inner workings of their appliances if you wish to continue to sucessfully compete in this market ...remember what happened to Nokia for not forseeing the touch screen display many years ago! I would never expect my Mother, my young wife or even my teenage son to download something like "iExplorer" and use it to delete 3 corrupted database files; therefore, dear Apple, please incorporate the self-diagnosis and repair functionality offered by an iPhone Explorer type system into your iTunes software ...or something similar to that! Get with the program!

How to display a specific tab in a screen after a popup message

Hi all,
        I've a rewuirement where in i need to display a secific tab in a screen after popping up a warning message. To be specific, when i choose 'Yes' in the popup window, it shoud take me to a tab which is not active while displaying the warning popup.
Thanks in advance....
Anil Kumar Japa

Hi
U need to active the tab you want to show:
So you should set the ok_code (of the tab) value to field ACTIVETAB
<TABSTRIP>-activetab = <OK_CODE>.
And transfer the value of subscreen number to the subscreen area:
CALL SUBSCREEN SUBSCREEN1
             INCLUDING G_CTRL_TABSTRIP-PROG
                       G_CTRL_TABSTRIP-SUBSCREEN.
Max

ITunes Match fails to upload songs in Step 3

This is an update to my earlier post on this problem.
During Step 3, when iTunes Match is supposed to upload non-iTunes Store music and artwork, it fails for an unknown reason and repatedly attemps the process all over again. This continues until aborted by the user.
After several months of frustrated tinkering, one of the iTunes Senior Advisors, suggested a solution that did solve the probelm. The solution is to limit the upload speed of the router to something less than 3 Mbps. Apparently, with high speed uploads either the iTunes Match server or iTunes itself cannot cope with the data flow and the upload process crashes with no indication to the user. While this solved my problem and my approximately 1,500 songs eventually uploaded, it did take more than 10 hours. But its done and my compete library is now on iTunes Match.
I pointed out to Apple that this solution was, in my opinion, a serious flaw in the iTunes Match offering and that Apple needs to address the problem.
My ISP provider is Comcast and I typically get download speeds of 28 Mbps and upload speeds of 5 Mbps. Obviously the 5 Mbps is too fast for the iTunes Match ecosystem. I was able to adjust the upload speed by changing the QoS settings of my Linksys router and giving iTunes a priority over other apps.
Hopefully this post helps out others with the saem problem.

The -2114 error, typically occurs when trying to download / stream an uploaded Song file. The error tends to be intermittant and may simply indicate a failing server in the Apple infrastructure.
Local action, wait for a period and re-try - usually successful - once working, ensure you download and backup a secure local version - or simply restore a good version from existing local backup.

ITunes Match fails to upload songs

I am posting this as information for other hapless iTunes Match users with the same problem.
When I first subscribed to iTunes Match it successfully completed Steps 1 and 2 but failed to complete Step 3, where it uploads songs and artwork not found in the iTunes Store. The failure mechanism is that the screen "dims" and the process starts all over again. Cycling like this indefintely and never uploading any songs. However, those songs that could be matched were, and made available in iCloud for my iOS devices and Apple TV.
I have spent 4 weeks trading emails with an iTunes Senior Advisor, who reports that the engineers have told her that the issue is with Match and not my computer or songs (library). During this time my Match account was refunded so that I could try again, however, the results were the same and I have requested a second refund and will not use Match.
One of the experiments that I conducted was to create a new, and clean, iTunes Library and populate it with only six albums (to reduce testing time). Three albums were iTunes Store purchases and three were known to not be in the Store, thus had to be uploaded. Match completed its process with only the purchased albums but failed, in the manner described above, with the ones to be uploaded. Deleting iTunes preference files and having iTunes rebuild its XML library file had no effect on the problem.
Since Match obviously works for some people (but not for me) there must be an obscure issue with my libray or the Match servers, or both. Hopefully someone smarter than myself has some ideas.

The -2114 error, typically occurs when trying to download / stream an uploaded Song file. The error tends to be intermittant and may simply indicate a failing server in the Apple infrastructure.
Local action, wait for a period and re-try - usually successful - once working, ensure you download and backup a secure local version - or simply restore a good version from existing local backup.

Display: family specific matching fails

Similar Messages

Maybe you are looking for