Display filters in report BeX Analyzer 3.5 X 7.0

Hi,
we used fronted for version 3.5, where after executing query in BEX 3.5 you can see information about filters, which is used in query or which we used in selection screen, in after 1st executing query in Excel sheet.
In BEX 7.0 - when we look to button Filter you can see only empty fields after 1st executing query, not filters which we used in selection screen or in definition query, as in BEX 3.5.
Do you know if is it possible change this feature?
Thanks
Petr

Hi Anita,
If you open a 3.x query in 7.0 it does NOT change the query technical name.
But yes if you have opened the query once in 7.0 you cannot open it in 3.x later. If you want to reopen 7.0 BEx queries back in 3.x BEx follow the below steps.
1) Goto se38.
2) put program name COMPONENT_RESTORE
3) Click "Display"
4) Click "Direct Processing" button from set of buttons available above the program.
5) It wil ask for "Info Provider" & "Comp. Type"
6) Put your concerned "Info Provider" and "Comp. Type" is "REP".
Hope this helps,
Thanks,
Mihir

Similar Messages

Report bex analyzer

Hi
I have a standard liquidity forecast report, said report has row-level cash coin concept integration level treasury and nem.cta code, and column level have the expected amount and the calendar day, is input parameter "data management box" that is the date, but when the report runs as the natural evolution has shown me all such amounts provided since 1950, and also shows a future date, which is required is to show me if I say for example in the input parameter dated current day show me the amounts provided for the evolution of accumulated and future, and not display backward by date but the show accumulated.
Someone who can help me with this
Greetings.
Nando.

hi
Thanks for the reply.
We checked the connectivity and it was oki..
The problem arise when executing reports in development client. production reports are working fine.
BEx installation check is also performed and found no errors.
Trace file indicates as follows :
Trace Started as: 4/3/2009 11:40:14 AM*
ListSeparator: ,
ExcelVersion: 11.0
AddinVersion: 7100.1.602.1292
BExCheckFrontend.CheckFrontend: No Check performed (20090402) 0
Conflicting workbook ids: iWBid: , Property: 7B2UOAYFBA2MLMWMBSDZJDSF0
4/3/2009 11:44:02 AM----
com.sap.bi.et.analyzer.api.BExApplication+BExConnectionLostException: Function module "RSR_NET_RESULTSET_GET_S" not found.
   at com.sap.bi.et.analyzer.api.BExApplication.FrontendUpdate(Boolean iNewThread, Boolean iDoNotReadData)
   at com.sap.bi.et.analyzer.addin.BExExcelApplication.FrontendUpdate(Boolean iNewThread, Boolean iDoNotReadData)
Function module "RSR_NET_RESULTSET_GET_S" not found.
   at com.sap.bi.et.analyzer.api.BExApplication.FrontendUpdate(Boolean iNewThread, Boolean iDoNotReadData)
   at com.sap.bi.et.analyzer.addin.BExExcelApplication.FrontendUpdate(Boolean iNewThread, Boolean iDoNotReadData)
Please let us know a solution ..
Thanks!

Display Blank Column in Bex Analyzer without Error

Hi Experts,
i have created a report with several columns.
To display the coorect descrition i use a new selecion and insert the required infoobject or Key Figure" it is ok.
Whe want to display two blank columns.
The problem i have is that there are some errors saying i should define thoses columns.
How to define a blank cloumn which is displaying the description but empty?
Thank you for your Input.
Gilo

Inside the query designer there should be a "columns" section. Formulas can be configured either by:
- creating a structure (dragging a structure from the left or creating a new structure)...or....
- dragging a key figure from the left window pane over to the "columns" section.
- you could create a new calculated key figure or restricted key figure, but this is not necessary in our example.
Right click on the structure or Key Figures. There should be 2 options: New Selection or New Formula. We chose new formula, add appropriate text/heading/description and put a =0 in the formula box, prior to clicking OK. The wider the heading text, the wider the new blank column will look.
Then right click on the column you just created to change it's properties to = suppress result for both the "calculate result as" and the "calculate single values as"....

Wrong Currency shown in Bex Analyzer / SFr. Symbole in Excel

Hi Experts,
Hi have a question regarding the display of currency in Bex Analyzer.
I have a report showing Euro in the most of columns and one column should shown usd. The conversion is done in the backend.
By running the report the column which should show USD show SFr. (Not a currency).
In Excel i checked in format cell--currency. There SFr. is define as Symbole. It is a general problem. How to solve it?
Thanks
Gilo

Hi Andrey,
thank you for replying.
Have you added IO currency to rows ?
-- Other Columns with Euro are showing the correct currency.
Does your conversion work correct ?
-- Yes
If you execute the report in bex query designer (via web) do you get correct results ? i can not execute via web.
I execute in rsrt and the column is showing the result with $. I expected to see USD.
1. why is bex showing the wrong currency?
2. why is the result under rsrt with $ instead of USD?
Thanks
gilo

Variable window not showing through BEx analyzer

HI Experts,
I am facing a weired situation with one of the variable.
I have a Customer Exit variable which is Input Ready and entry is Mandatory, i wrote some code in CMOD to fetch default values through I_STEP=1 and my requirement is that user should able to change the values if needed.
now, the problem is, I can able to get the variable input screen when i execute the query through RSRT with Query display mode as HTML. But when i execute the same query in BEx analyzer or through RSRT with different Query Display modes like List/Bex Analyzer am not getting the variable input screen.
The variable is taking the default value generated through CMOD code and the same values are being used in determining the query output..
Please suggest me what do i need to do inorder to view the Variable input screen in BEx analyzer.
I am using BEx Analyzer 3.x for the queries and working with
SAP Version   -
   SAP EHP 1 for SAP NetWeaver 7.0
DB:                  -
   ORACLE 11.2.0.2.0
OS                   -
    AIX

I found the solution in one of the SAP notes and the issue is resolved.
We used Note: "1609237" to resolve the issue. Hope this might help anyone who faces this same problem..

Text characters displayed as # on Bex analyzer (excel)

Hi all,
I am having issues with Turkish Charaters displayed on the report output on Bex analyser.
The Turkish text characters in the fields like Name 1, Name 2, city are displayed in # format.
This is happening only when the report is executed on Bex analyzer (excel). In BW system I can see the turkish characters properly. There is no # symbol anywhere when i check in cube or master data.
The # sign is not shown when the query is executed on internet explorer(web report). This issue is only with Bex analyzer(excel).
Some sample data is as below.
Correct data in BW cube or master data: ÜCRETLI ÜRETICISI TÜ
The same is displayed when executed the report over web.
But when executed on BEX analyzer(Excel) it shows as: #CRETLI #RETICISI T#
This was not happening last month. I was able to see the turkish characters last month properly on BEX analyzer.
Now we are having this # issue.
Can anyone suggest what could be the problem with? and how we can rectify this?
Thanks in advance

Hi Maddy,
I also think it is a front-end issue.
The texts look fine in RSA1 and in Web Analyzer.
The problem with the codepage variable is that as far as i know it can have only one value.
On my report I have a list of purchase orders with the vendors.
The vendors come form different countries and are maintained by the country's affiliate in their native language.
The user needs to see the texts for all displayed vendors regardless the language and alphabet.
Right now I have probelms with Greek, Bulgarian and Serbian.
But next month the report may contain the vendors from other countries.
Therefore I would have to add all languages to codepage variable.
In fact in my system it doesn't even work for one value.
I also added other languages to windows regional settings but it didn't help.
Do you have any tips on that?
Thanks,
Marek

Create report on hierarchies using Bex Analyzer

Hi sir/mam,
can any one tell me how to create report on hierarchy in BEx Analyzer .
Basically i have an info object which is kept under Rows.what i did wasi simply dragged from Dimensions and dropped that info Object into Rows in Rows/Column pane.But that info object has hierarchy in Dimensions. when i dragged and dropped i only get that info object not with the Hierarchy.Now i have to create a report on that info object with the same Hierarchy as it is in the dimensions .
please tell me the steps how to create hierarchy .

Dolly, welcome to developing in BW.
A hierarchy is considered a 'Property' of a characteristic. You can just right-click on the characteristic and select the hierarchy from the tab titled "Hierarchy" in the properties section. Select "Activate Hierarchy Display" and choose the hierarchy you want to show. You can also use a variable to allow the user to select from all available hierarchies for that characteristic.
(Note that this is for BI 7. BW 3.x involves a similar process, but the interface is a bit different.

Problem with the display sequence of free characteristics in Bex Analyzer

Hello,
I want to display free characteristics in particular sequence in Bex Analyzer.
I have arranged free characteristics in particular sequence in bex designer but while executing the report from analyzer
free characteristics are not getting displayed in the sequence in which i wanted to display it in query output.
Could you please let me know what setting needs to be done in order to display free characteristics in required sequence in bex analyzer.
Regards,
Sanjay

Hi Sanjay:
Please observe that the sequence of Characteristics in BEx Analyzer is Alphabetic (in ascending order), I faced a similar situation once and I solved it by adding a prefix to the Characteristic Name at the query level, for example.
Customer
Distribution Channel
Division
Month
Sales Organization
Year
Could be sorted this way.
A01. Year
A02. Month
B01. Sales Organization
B02. Distribution Channel
B03. Division
C01. Customer
Regards,
Francisco Milán.

Wrong message while running report in bex analyzer

Hi Experts,
I have created an authorization object based on compnay code. I use the option RSECADMIN => Analysis => Execute As, to test this authorization object. When I give incorrect company code value, it displays correct message that is 'No authorization'.
But when I test in bex analyzer for same report, with same incorrect company code value instead of showing 'No authorization' message, it shows 'No applicable data found' message. Is there anything wrong here?
How can I show the correct authorization message 'No authorization' in bex analyzer, when incorrect company code is supplied?
Thanks,
Purvang

Hi Pratap,
thanks for reply.
I also thought that way initially but then was skeptical of different message received while testing in RSECADMIN. If SAP is going to show 'No applicable data found' message then how will a user have any idea that actually he is not authorized for the supplied value of company code.
does anyone know if this is bug or is there any workaround to show right message i.e. no authorization.
Thanks,
Purvang
Edited by: Purvang on Oct 19, 2011 3:18 AM

Crystal Report for Enterprise not displaying Long Text from BEx

Hello,
I am creating a report using SAP Crystal Report for Enterprise 4.0 (Version 14.0.2) and the source of data is BEx query via OLAP connection created using IDT. I am using SAP BusinessObjects BI platform 4.0.
The Characteristic (which is hierarchy) in the Rows section of the BEx Query is set to display long text and as such, it displays long text when the query is executed in the BEx Analyzer. However, when it comes to Crystal Report, the short text is displayed in the report. Can I display long text in the Crystal Report? How?
Thanks,
KP

Venkat,
Thanks for your response. Please note, however, the transaction RAD1 does not exist. Let me provide more details about the current settings of the InfoObject.
The Characteristic is 'Item' (0CS_ITEM) and upon going to RSA1 > Modeling > InfoObjects > Item (0CS_ITEM) > Right Click > Display > Business Explorer (tab) > Text Type is set to 'Long Text' and BEx description is set to 'Long description' already.
When I run/execute the query with this Item characteristic, the results in BEx Analyzer is showing appropriate long text, however, Crystal Report for Enterprise shows short text only
K
Edited by: Kumar Pathak on Feb 3, 2012 6:18 PM

Error when trying to run web report from BEx analyzer

Hi Gurus,
I am getting this error "STOP: System error in program SAPLRRS2 and form SELOPT_ASSIGN-01", when I am trying to run the report from the 4th button "Display report on Web" on BEx Analyzer. Can anybody tell me what this and how we can resolve it.
Thanks and I will assign points.

I coudn't properly understand solution provided herein:
"Solution
Note that you must generate the query again after you have implemented the correction (Transaction RSRT1 > Generate report).
SAP NetWeaver 2004s BI
Import Support Package 07 for SAP NetWeaver 2004s BI (BI Patch 07 or SAPKW70007) into your BI system. The Support Package is available when Note 0872279 "SAPBINews BI 7.0 Support Package 07", which describes this Support Package in more detail, is released for customers.
In urgent cases, you can use the correction instructions.
To provide advance information, the note mentioned above may be available before the Support Package is released. In this case, the short text of the note still contains the words "Preliminary version"."

Variable hierarchy display not changed (BEx analyzer)

Hi
We have a BEx query, in which a drilldown characteristic is displayed as an hierarchy
Hierarchy display is active
Selected hierarchy:
Name - constant
Version - customer exit variable
Customer exit calculates version from manual input variable.
We need to view the report in BEx Analyzer.
When the query is opened, we select manual input variables and the hierarcy's version is set correctly.
The issue is that when we change manual input variables at runtime, the data is refreshed,
but hierarchy display is not changed. The selected hierarchy's version remains unchanged.
In order to change hierarchy display, we need to open characteristic properties and change the selected hierarchy manually
or we need to reopen the query and provide another manual input variables.
Our system version is 7.01 patch level 9
Is there any way to fix this problem
Or some workaroud?
Any help will be appreciated.
Thanks

Michael, thank you for reply.
But I don't see how these notes may help me with my problem.
1753959 - I don't get a short dump
1745472, 1751321 - system displays all queried nodes, the problem is that if I input another variable, hierarchy version variable is calculated via user-exit properly (I see it in ABAP debugger), but displayed hierarchy has version, which was set when I opened query initially.
1717433 - nodes are returned with non-empty result. I can see that data is refreshed, hierarchy version is requested correctly, but is displayed incorrectly. We can see, for example, new hierarchy leaves, but in "n/a" node.
I tried to run the same report on system with version 7.01, patch level 12 and get the same behaviour.
My problem is similar to that described in notes 993151, 957219, but our system patch level is already higher.

Chinese characters not displayed in Bex Analyzer

Chinese characters in a BI report display fine in Bex Web, but not in Bex Analyzer (Excel). Not sure if this is a NW2004s issue, or just an excel config issue. Is this a known issue?

The problem is fonts. Are you setting a specific font for your dialog? If not, this is a JRE bug. Regardless, you can display the Chinese if you set the font for the dialog using a font that you know contains Chinese glyphs.
John O'Conner

Issue with status of data information in Bex analyzer report

Hi BI gurus,
One of the queries showing older date for the "status of data" information in the report of Bex Analyzer. I have tried to correct it in Bex analyzer by removing existing Text information element and adding a new Text element in the Bex Analyzer designer for the query. But it doesn't worked out as the changes made to the query through Bex Analyzer are only being saved as a local work book rather than reflecting to the query. Please suggest me with some options to resolve this issue and give any Idea to correct the "Status of data" in the Bex Query designer.

Hi Aditya
This is a common problem faced by users when reporting on Multi-Provider.
In my project what I did to overcome this is to run a Fake DTP to the cube whose status is creating problem.
Like , if under MultiPro I have a planning cube which is only updated monthly but all the actual cubes updated daily. In this case create a DTP under Plan cube with some impossible selection condition ( like fiscal year 2099). This will bring 0 records to planning cube ( and thereby not impacting the data) but will update the last loading time.
Regards
Anindya

No data in Portal Report but have data in Bex Analyzer

Hi experts,
I have problem regarding portal reports. When you view the report using the bex analyzer, there is data. But when you view the report in the portal from iview, there is no data.
Please help experts.
Thanks

Hi Emmanuel (that's weird, I am an Emmanuel too! and we both have Filo origins),
There can be heaps of reasons for this.
1) Please try to run the query in transaction RSRT by entering the query name and clicking "Java Web". See if that gives you results. If that gives your results, then the iView that was saved in the portal might need some reconfiguration. Check it out.
2) Check the logic of your user exit variables. The sequence of the I_STEP calls is a bit different if you run a query in the Portal. For example, if you don't have a mandatory variable in your query, then the olap engine will call I_STEP=1 to 3 before it shows the variable screen. This behaviour is not documented in help.sap.com. However, it does work that way.
3) Try to check the caching settings for your iView. It might be caching the result. You can change this in Content Administration in the portal.
Try the above and see if it helps. Otherwise, post another message.
Cheers.

Display filters in report BeX Analyzer 3.5 X 7.0

Similar Messages

Maybe you are looking for