Display flipped after installing FB 4.5

I'm sorry to report something so deeply weird, but yesterday I installed the FB 4.5 trial and afterward my application, which is built in FB 4.0, got flipped horizontally. Here's a screenshot in case you don't believe me.
I uninstalled Flash Builder 4.5 and the problem remains. Any ideas?
Thanks,
Adam

In case any of Adobe's other customers find this through Google, before you get frustrated by Adobe's awful customer support for sending you to Google instead of providing a direct link to the answer, here is the answer:
Add the following as the first child element to your <s:Application>:
    <fx:Style>
        @namespace s "library://ns.adobe.com/flex/spark";
        @namespace mx "library://ns.adobe.com/flex/mx";
        global {
            layoutDirection: "ltr";
    </fx:Style>
I think the link that the support professional wanted to provide is http://stackoverflow.com/questions/5019870/intermittent-right-to-left-mirroring-of-ui-and- text .
Cheers!
Adam

Similar Messages

Display problems after installing 10.5.2 and the leopard graphics update

Shortly after installing the leopard graphics update, my display started exhibiting problems.
The next day, the powerbook wouldn't even boot, just leaving me at a blue screen.
I tried verifying permissions and verifying disk, reinstalling leopard and eventually did a fresh install of Tiger, which boots, but crashes frequently and has graphics corruption as visible in this screenshot:
http://pics.livejournal.com/dorukai/pic/000fw0hw
The same corruption is visible on a second monitor if I connect one.
The timing (being right after installing the graphics update) suggests that the update somehow caused this problem (flashing the video card firmware maybe?) but any ideas at all are very welcome at this point!
Unfortunately after installing Tiger I kept getting updates, and one has broken the ability to boot normally, I can only boot in safe mode

I have the same problem. It happened right after I installed the graphics update. When the computer restarted, my screen went crazy. I couldn't see anything, just a screen full of horizontal lines. After restarting a couple of times it seemed to go away, but it has begun to happen again recently. although not as bad yet. I am not saying it's not a logic board issue, but it does seem funny that more than one person is experiencing the same type of problem after the graphics update. I guess it's time to take a trip to the apple store.

Display error after installing OSX Mountain Lion

after installing the new OS X 10.8 a rectangle appears around the cursor : how do i get rid of this ?

Look in System Preferences > Accessibility > Zoom on left > More Options... button > uncheck Show preview rectangle when zoomed out.

Macbook Air Late 2010 display flickers after installing Yosemite

Hi !
I'm from Germany.
i have upgraded my Macbook Air, Late 2010 from Mountain Lion to Yosemite last Saturday.
The Installation works fine. At the first Time i have no problems, but:
One Day later i start my Macbook Air normally. Now the left side of the screen is flickering.
There are vertical lines to see. The right side of the integrated screen is ok.
i have resetted the SMC and the Power Management.
Please help, what can i do ?
Greetings
iRoGo

I noticed a similar issue with my MBA 2012 after installing Yosemite. The screen flickers slightly most of the time now. It's more noticeable with dark backgrounds. It almost 'vibrates' and is very annoying. Reminds me of an old monitor with a low refresh rate. I reset the SMC, PRAM, etc. and contacted Apple, who had me go through the same steps. The flickering is still present when booted into Recovery Mode. When I boot into Safe Mode the issue gets dramatically worse and I see screen artifacts like iRoGo describes -- parts of the screen blanking out, whole screen/parts of the screen flickering on and off, lines appearing, etc. It's basically unusable in Safe Mode.
At this point the issue seems to be hardware-related (i.e. issue persists in even in Recovery Mode), but I'm suspicious seeing that it manifested right after installing Yosemite. I will be bringing my MBA to Apple for service later this week...

Display issues after installing Mavericks

Have an iMac mid 2007 and installed Mavericks. However am noticing areas on the screen where there are moving diagonal lines (the best way I can describe it) and also on certain background colours like light grey there is a horizontal pin stripping effect.
I have reinstalled a clean copy of Mavericks twice and also reinstalled a clean copy of Mountain Lion to check for this issue but no sign of it in Mountain Lion at all.
Have been on to AppleCare and they have had me reset the SMC and PRAM and also repair permissions and repair disk as general troubleshooting but the problem still persists. They have said to try downloading the installer again for Mavericks, which I am currently doing, incase there is something wrong the first copy although installed and works fine on my MacBook.
Just wondered if anyone else had had this issue either using an iMac Mid 2007 with the ATI Radeon HD 2600 Pro 256mb or later model?
I am wondering if it may be something to do with the driver included with Mavericks for my graphics card?
Thanks for any help anyone can give.

We are experiencing the same problems here. One iMac 2007 has the ATI Radeon HD 2600 Pro 256 MB and it seems even worse on the iMac early 2008 with ATI Radeon HD 2400 XT 128 MB.
After a bit of research, I first thought this had to do with the massive changes affecting color management and color profiles in Mavericks - but saturation and contrast seem to be another subject, as no one mentioned the moving lines/moiree/stripes in those discussions (i. e. https://discussions.apple.com/message/23530727#23530727).
Calibrating the monitor with advanced settings at least helped reduce the moiree and stripes in the majority of cases for me. I went to System Preferences > Displays > Color > Calibrate and enabled the checkbox to see all advanced settings. Choosing a "gamma correction" of 1,94 reduced a lot of the noise, although I am considering switching back to Lion until a proper fix is delivered. What a nuisance!

Display Problems After Installing Graphics Card Drivers

Hi, I was wondering if anyone can help with a problem that's got me stumped?
I've just upgraded my pc (CPU, Motherboard, Memory, Hard Drive, Sound Card, Monitor) - the only things that haven't changed are my graphics card and PSU.
I've built the system, installed windows and the motherboard drivers, which all work correctly. But after I install the graphics card drivers and reboot, the display becomes all scrambled when it loads into windows. The display is fine with the initial boot and up until the Windows XP screen, with the moving bar comes up.
The graphics card was fine in my previous system and I have tried my old monitor, but neither works. I've updated the BIOS, using the MSI Live Update program and have also tried various versions of the nVidia drivers (including the latest).
Any help would be appreciated.
Thanks in advance.
****UPDATE****
I've now managed to install the nVidia drivers and now windows loads normally, but after a short amount of time the screen scrambles again.

I have the same problem. It happened right after I installed the graphics update. When the computer restarted, my screen went crazy. I couldn't see anything, just a screen full of horizontal lines. After restarting a couple of times it seemed to go away, but it has begun to happen again recently. although not as bad yet. I am not saying it's not a logic board issue, but it does seem funny that more than one person is experiencing the same type of problem after the graphics update. I guess it's time to take a trip to the apple store.

MBP retina: can't switch display resolution after installed switchresx

Hi all,
I installed switchresx 4.3.1 to try native resolution 2880x1800.
After that, I uninstalled switchresx, but now I can't change resolution from displays preferences pane in Lion: it' stuck on "more space", and preference pane says "Looks like 1440 x 900" instead of 1920x1200, as shown in image.
If i try to press other buttons nothing happens.
Is there any file that has been modified or deleted installing switchresx?
Any suggestion how to get it work again?
Best regards,
Alessandro

I managed to find the issue:
the file /System/Library/Displays/Overrides/DisplayVendorID-610/DisplayProductID-a00 was deleted.
Here is a copy of the original one: created it and the problem was fixed.
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
        <key>IOGFlags</key>
        <integer>4</integer>
        <key>scale-resolutions</key>
        <array>
        
        
        
                <data>AAAPAAAACWAAAAAB</data>                           
                <data>AAANIAAACDQAAAAB</data>                           
                <data>AAAKAAAABkAAAAAB</data>                           
                <data>AAAIAAAABQAAAAAB</data>                           
                <data>AAAEAAAAAwAAAAAB</data>                           
                <data>AAADIAAAAlgAAAAB</data>                           
                <data>AAACgAAAAeAAAAAB</data>                           
        
                                          
                <data>AAAKAAAABaAAAAABACAAAA==</data>           
                <data>AAAHgAAABLAAAAABACAAAA==</data>           
                <data>AAAHgAAABDgAAAABACAAAA==</data>           
                <data>AAAFAAAAAtAAAAABACAAAA==</data>           
        
                                          
                <data>AAAGkAAABBoAAAAB</data>                           
                <data>AAAFoAAAA4QAAAAB</data>                           
                <data>AAAFAAAAAyAAAAAB</data>                           
        
                <data>AAAPAAAACWAAAAAJAKAAAA==</data>           
                <data>AAANIAAACDQAAAAJAKAAAA==</data>           
                <data>AAALQAAABwgAAAAJAKAAAA==</data>           
                <data>AAAKAAAABkAAAAAJAKAAAA==</data>           
                <data>AAAHgAAABLAAAAAJAKAAAA==</data>           
                <data>AAAHgAAABDgAAAAJACAAAA==</data>           
                <data>AAAFAAAAAtAAAAAJACAAAA==</data>           
        </array>
</dict>
</plist>

[solved]display problems after installing nvidia driver

hi
i have nvidia geforce 8400 gs card, after i uninstalled all other drivers, installed nvidia,nvidia-utils, then nvidia-config,then installed vpdau-video,then restart
i noticed that hardware and deamon checks screen after boot became huge letters as if no driver installed yet, and when i run lxterminal i noticed black window on the top left of the screen exactly the same size as the terminal window, and when i browse using chromium and the page contains flash video, the video window image stays on the screen.
Last edited by shalaby (2011-05-02 15:33:41)

I think current nvidia driver is broken - I have these black windows at some rare situations also (under KDE without effects; no under OpenBox). IIRC, nvidia developers mentioned somewhere in Arch bugs system they are aware of the problem.

Font selections displayed wrong after installing Infinality

Not sure where I went wrong but now when I choose a font in some apps (hexchat and xfce4-terminal at the moment), the font that I selected will not be the one that the app shows I selected. It appears that the correct font is being used after the selection however.
Here are the contents of /etc/fonts/fonts.conf if that helps:
<?xml version="1.0"?>
<!DOCTYPE fontconfig SYSTEM "fonts.dtd">

<fontconfig>





<dir>/usr/share/fonts</dir>
<dir>/usr/share/fonts</dir>
<dir prefix="xdg">fonts</dir>

<dir>~/.fonts</dir>

<match target="pattern">
<test qual="any" name="family">
<string>mono</string>
</test>
<edit name="family" mode="assign" binding="same">
<string>monospace</string>
</edit>
</match>

<match target="pattern">
<test qual="any" name="family">
<string>sans serif</string>
</test>
<edit name="family" mode="assign" binding="same">
<string>sans-serif</string>
</edit>
</match>

<match target="pattern">
<test qual="any" name="family">
<string>sans</string>
</test>
<edit name="family" mode="assign" binding="same">
<string>sans-serif</string>
</edit>
</match>

<include ignore_missing="yes">conf.d</include>

<cachedir>/var/cache/fontconfig</cachedir>
<cachedir prefix="xdg">fontconfig</cachedir>

<cachedir>~/.fontconfig</cachedir>
<config>

<blank>
<int>0x0020</int> 
<int>0x00A0</int> 
<int>0x00AD</int> 
<int>0x034F</int> 
<int>0x0600</int> 
<int>0x0601</int> 
<int>0x0602</int> 
<int>0x0603</int> 
<int>0x06DD</int> 
<int>0x070F</int> 
<int>0x115F</int> 
<int>0x1160</int> 
<int>0x1680</int> 
<int>0x17B4</int> 
<int>0x17B5</int> 
<int>0x180E</int> 
<int>0x2000</int> 
<int>0x2001</int> 
<int>0x2002</int> 
<int>0x2003</int> 
<int>0x2004</int> 
<int>0x2005</int> 
<int>0x2006</int> 
<int>0x2007</int> 
<int>0x2008</int> 
<int>0x2009</int> 
<int>0x200A</int> 
<int>0x200B</int> 
<int>0x200C</int> 
<int>0x200D</int> 
<int>0x200E</int> 
<int>0x200F</int> 
<int>0x2028</int> 
<int>0x2029</int> 
<int>0x202A</int> 
<int>0x202B</int> 
<int>0x202C</int> 
<int>0x202D</int> 
<int>0x202E</int> 
<int>0x202F</int> 
<int>0x205F</int> 
<int>0x2060</int> 
<int>0x2061</int> 
<int>0x2062</int> 
<int>0x2063</int> 
<int>0x206A</int> 
<int>0x206B</int> 
<int>0x206C</int> 
<int>0x206D</int> 
<int>0x206E</int> 
<int>0x206F</int> 
<int>0x2800</int> 
<int>0x3000</int> 
<int>0x3164</int> 
<int>0xFEFF</int> 
<int>0xFFA0</int> 
<int>0xFFF9</int> 
<int>0xFFFA</int> 
<int>0xFFFB</int> 
</blank>

<rescan>
<int>30</int>
</rescan>
</config>
</fontconfig>

Running
fc-cache -fr
seemed to fix it. Solved.

Preview app and retina display problem after installing Maverick

Hi everyone, i upgraded to Maverick yesterday and i now have a problem with the software "Preview 7.0". I've got a macbook pro 13" retina.
Before Maverick i could visualise image in high resolution using Preview, and the 100% view was showing the image full quality. Now my Preview software acts like i'm not on retina and i can only visualise my images with the resolution of a standard monitor.
Does it make sense ? Please help !!!

I'm having the same issue with Preview not displaying images at the correct resolution. If you also look at the info in Preview, there are metadata issues showing up. Under "Creator's Contact Info" this is the info displayed.
Creator's Contact Info: , CiAdrCtry, CiAdrExtadr, CiTelWork, CiUrlWork, CiAdrPcode, CiAdrRegion, CiAdrCity, CiEmailWork
Something is broken with the program.
Macbook pro retina 15" (late 2012)

HT4356 Mavric doesn't support my 5 years old Big Screen Display, OR? Tried to connect my Mac Book Pro after installing Mavric, The Screen didn't work as before. I could only see the Desktop but not the movies for example. What can I do?

Mavric doesn't support my 5 years old Big Screen Display, OR? Tried to connect my Mac Book Pro after installing Mavric, The Screen didn't work as before. I could only see the Desktop but not the movies for example.
<E-mail Edited by Host>

It appears what happened is the installer though it was looking at a empty drive and just went ahead and installed.
I of course am assuming here you didn't use Disk Utility to format the drive first before installing, that would wipe out your files and programs for sure.
So what to do, what to do.
Well there is hope for you as long as the drive wasn't Filevaulted.
I'll explain. When a hard drive writes data for the first time to a drive, it starts at the very top and works it's way down.
When OS X was installed the first time, it was at the top of the drive, unless you upgraded then the upgraded OS X could have been written elsewhere.
Now when you just reinstalled OS X, the new OS went on the top of the drive, overwriting any data that was there previously, so what was there you have lost forever which is about 8GB or so. If it was the previous OS there, then your more in luck because only the old OS X was overwritten.
The remaining space on the drive still can have a copy of your files, provided it's not overwritten yet.
It's because when a hard drive deletes data or reformats, it doesn't remove the data off the drive or overwrites it immediately, it's just made so it's SPACE is available for new files to be written there.
So technically one can recover the deleted data off a non-encrypted/scrubbed hard drive with special software.
The way it does this is it reads the 1's and 0's of the files themselves, and through a lot of figuring out, can tell what that file is and what it belongs too.
So what you will have to do is this:
Create a data recovery/undelete external boot drive
or if you don't have the skills, then take it to a local PC/Mac tech and they can do a direct image of the drive and then you can run Data Rescue on it to rebuild your files.

After installing ilife '11 when i opened iPhoto its display a message"You can't open your current photo library using this version of iPhoto, what can i do sir??

i buy apple mac book on 12.04.2012, mac osx 10.7.2, 500gb hdd,4gb ram, i installed ilife '11 in it, after installing ilife '11 when i opened iPhoto its display a message"You can’t open your current photo library using this version of iPhoto,You have made changes to your photo library using a newer version of iPhoto. Do you want to quit and use the latest version of iPhoto, or do you want to create a new photo library? but option coming only quit, when i check for software update it shows ur software is up to date, waht can i do sir, how can i use my iphoto???

Make sure you are updated to the latest version - 9.2.1
LN

ITunes no longer displays CDs after latest install

I've seen similar older questions, but I haven't seen an answer that works yet.
I Just installed latest iTunes SW (12.1.x?) on 2/28/15. Now iTunes does not display (or ask to display/import) a CD when I insert one (or have one inserted). (My preferences are still set to ask to import a CD when inserted.) iTunes has the same issue with both of my drives. Windows Media Player can play CDs from either drive just fine - so its not a problem with the drives. When I run iTunes diagnostics, iTunes recognizes my drives and gives them both 'green' status... however - they still don't show up in iTunes (when CDs are in them). iTunes seems to be working fine other than this. (I'm able to sync to my devices, play songs, etc.)
There's an articles I found on trying to repair 'missing drives' (iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install - …) And I tried the steps here even though its not exactly the same issue. (I removed than 'reinstalled' the latest Gear driver; I verified I don't have either of the afs.sy, afs2k.sys conflicting drivers.)
I'm running Windows-7 64-bit.
I have not tried to uninstall/reinstall iTunes... [yet].
Anyone having the same issue?

Thank you so much for your responses. I greatly appreciate it. I wish Apple was as responsive as you. I also wish it was easier to find out how to actually file a bug report with them.
My first PC was back in the 80's. I made sure to have a 5.25" floppy drive since 3.5" was still new. It was a fancy PC back then, with the 3.5" on my A: drive and 5.25" on B:.... Styling. The PC I run iTunes on now is about 4-5 years old, (about 25 years newer than my first one) and has up-to-date BIOS, Windows 7, etc. I built it myself with whatever was pretty much top-of-the-line at the time.
I don't doubt that even Windows 7 still has some ancient A;/B: drive issues lurking about. I was nervous about that when I changed my optical drive letters to use them a month ago. No other software, including Windows Media Player, had any issue, so there didn't seem to be a problem. I feel like I'd ripped a CD into iTunes since I changed the drive letters, but I must not have. Unfortunately I updated iTunes right before trying to import a new CD I just bought, which led me to believe the update was bad... especially after seeing several 'similar' issues from other users who updated to iTunes 12.1.1.4 (including your original comment). I suppose my bad, for not fully checking out using the old reserved drive letters when I changed them.
I still consider this an Apple iTunes bug (even though I'm sure there's plenty of blame to share with Windows). Since ALL my other software is fine with the drive letters there's no reason iTunes - as big as it is - shouldn't also be. AND there's no reason iTunes shouldn't warn about this when Run Diagnostics is run from iTunes. Run Diagnostics DOES recognize the A:/B: drives, but does NOT report any error on it. This would have been no issue at all if their diagnostics software identified that iTunes still has an issue with the historic drive letters instead of just reporting that everything is OK.
Hopefully Apple browses through these forums. I 'think' I found a place to report the BUG to them last night, but they don't make it easy to find that through their contact pages that kept bringing me back to the phone number web page. (Sorry for the rant... I'm just frustrated cause I wasted so much time on this, and even more time on my previous issue with iTunes stealing some music from me that I had purchased and saying i didn't own it any more even though I still have all the receipts... I'm really about to give up Apple completely - I already moved to Amazon for digital downloads due to Apple's music theft.)
Anyway I'll consider this issue closed when Apple fixes it (either by accepting the old reserved drive letters, or by updating their Run Diagnostics)... in the meantime, I have an easy, though undesirable, workaround in using alternate drive letters.
Again. Thank you for your help. Your responses helped push me to find the real issue and a workaround. I truly appreciate it.

After installing CF10, I get this error msg,"This page can't be displayed"

After installing CF10, I get this error msg when I try to access the Administrator page,"This page can't be displayed"
I'm running Window Server 2003, 64 bit version with IIS 6.0.
Before I installed CF10, I uninstalled CF8.

@Len said, “ BTW, there is no 64 Bit entry under Application Pools.”.
I suspect @Anit was assuming you were using IIS 7, in which case you could check the IIS app pool (advanced settings, for the app pool used by the site you are browsing) to see if it was set to “enable 32-bit applications: false”, assuming CF is configured as 64-bit, or if CF is configured 32-bit, then you would want that to be set to “enable 32 bit applications: true”.
It seems you’re using IIS 6, and there is no GUI means in the IIS 6 control panel to change the bitness of the app pool. There are various means discussing how to do that on the web, as well as a blog entry from Ben Forta, from back when people were deploying CF 7 (which was 32-bit only) 64-bit Windows and IIS:
http://www.forta.com/blog/index.cfm/2006/2/6/connecting-coldfusion-mx-7-to-64bit-iis-6
For those on IIS 7, here is at least one page showing how to configure it in IIS 7 (has no reference to CF, but I had a hard time finding any existing blog entry that showed screenshots of configuring this feature):
https://help.webcontrolcenter.com/KB/a1114/how-to-enable-32-bit-application-pool-iis-7-ded icatedvps.aspx
But back to your error, @Len, if setting the bitness of the IIS app pool is not the solution, I’ll note that there can be many other reasons that you get that error. What are you seeing in the Windows Event log (using “event viewer”), or the IIS logs (especially httperr.log), or the CF logs (\coldfusion10\cfusion\logs)?
/charlie

After installing IOS6: after erasing the history of Safari, the next time I fire up Safari, I see a split-second of the last displayed screen of Safari. Not a big issue but it should not be that way.

After installing IOS6:
After erasing the history of Safari, the next time I fire up Safari, I see a split-second of the last displayed screen of Safari.
Not a big issue but it should not be that way.

Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
Trash the current Firefox application to do a clean reinstall.
Install the new version that you have downloaded.
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

Display flipped after installing FB 4.5

Similar Messages

Maybe you are looking for