Display freezes randomly

I've had my laptop for about 3 years.
Lately the display has been freezing up at random times. Then when I go to turn the computer back on, sometimes it won't load properly. What's causing this?

See my other FAQ*:
http://www.macmaps.com/backup.html
In summary, if you can boot it up, attach a Firewire external hard drive to it, and attempt to clone it. If you can't boot it up, attempt to run target disk mode on it, and connect it then to another Firewire capable Mac copying over the essential files. If the drive is invisible when attached via Target Disk Mode, you may need to use Prosoft Data Rescue, Subrosasoft Filesalvage, or Boomerang's Boomerange to salvage files over Target Disk Mode.
If that's not possible, it may need to be sent to a data recovery firm. Once backed up, we can try to see the reasons why the display is freezing and the system isn't always booting up.
Also, is the machine more than 4 years old?
- * Links to my pages may give me compensation.

Similar Messages

  • Watching a Film: Display Freezes randomly.

    Hello,
    I have the Problem, that everytime I watch a film in fullscreen sometimes my Display freezes (Sound continues). When I move the mouse, the film continues.
    This could happen after 5 or 7 minuntes and then after 10 or 3 minutes again.
    I don't know where this can come from. I turned off all energy saving-options / screensavers. I Use OSX Mavericks and iTunes 11.1.3 (8) on my iMac mid 2010.
    I would appreciate any help,
    thanks

    Is this what you are constantly seeing? The grey bars at the top and the bottom with the controls?
    BTW, I see autocorrect turned "volume" into "Blume" in my response to you, but I guess you figured it out.
    I just don't understand why you are even seeing the battery icon. It doesn't make sense. Do you see it in portrait and in landscape and I just now though of this .... Are you seeing this behavior in the built in Videos App or some third party app? Do you see it while streaming a video or with downloaded videos ...or both?
    But like I said, you shouldn't see it anywhere at all.

  • After recent updates, Gnome freezes randomly. Video problem?

    I've been having some problems lately that I didn't have before recent updates.
    My desktop will freeze randomly and my only option is to switch to a VT and enter multi-user mode with `systemctl isolate multi-user.service`. X doesn't crash though. My Gnome Desktop just freezes entirely, but the mouse pointer continues to move around just fine. When I enter multi-user mode, Xorg.0.log says that the server exited successfully.
    Below are error messages in dmesg, systemd journal, and Xorg.0.log.
    # dmesg | grep -i error
    [17986.766825] [drm:r100_cs_track_texture_check] *ERROR* Texture of unit 0 needs 245760 bytes but is 139264
    [17986.766827] [drm:r100_cs_track_texture_print] *ERROR* pitch 1280
    [17986.766829] [drm:r100_cs_track_texture_print] *ERROR* use_pitch 1
    [17986.766831] [drm:r100_cs_track_texture_print] *ERROR* width 65
    [17986.766833] [drm:r100_cs_track_texture_print] *ERROR* width_11 2048
    [17986.766834] [drm:r100_cs_track_texture_print] *ERROR* height 48
    [17986.766836] [drm:r100_cs_track_texture_print] *ERROR* height_11 2048
    [17986.766838] [drm:r100_cs_track_texture_print] *ERROR* num levels 0
    [17986.766840] [drm:r100_cs_track_texture_print] *ERROR* depth 0
    [17986.766842] [drm:r100_cs_track_texture_print] *ERROR* bpp 4
    [17986.766844] [drm:r100_cs_track_texture_print] *ERROR* coordinate type 0
    [17986.766845] [drm:r100_cs_track_texture_print] *ERROR* width round to power of 2 0
    [17986.766847] [drm:r100_cs_track_texture_print] *ERROR* height round to power of 2 0
    [17986.766849] [drm:r100_cs_track_texture_print] *ERROR* compress format 0
    [17986.766851] [drm:radeon_cs_ib_chunk] *ERROR* Invalid command stream !
    [22547.870582] plugin-containe[20829]: segfault at 7fcf04225a05 ip 00007fcf1487c9d8 sp 00007fcf0c3a1970 error 4
    # journalctl | grep -i error
    Nov 07 23:22:43 starlancer kernel: [drm:r100_cs_track_texture_print] *ERROR* bpp 4
    Nov 07 23:22:43 starlancer kernel: [drm:r100_cs_track_texture_print] *ERROR* coordinate type 0
    Nov 07 23:22:43 starlancer kernel: [drm:r100_cs_track_texture_print] *ERROR* width round to power of 2 0
    Nov 07 23:22:43 starlancer kernel: [drm:r100_cs_track_texture_print] *ERROR* height round to power of 2 0
    Nov 07 23:22:43 starlancer kernel: [drm:r100_cs_track_texture_print] *ERROR* compress format 0
    Nov 07 23:22:43 starlancer kernel: [drm:radeon_cs_ib_chunk] *ERROR* Invalid command stream !
    Nov 07 23:41:07 starlancer dbus-daemon[275]: dbus[275]: [system] Rejected send message, 2 matched rules; type="method_return", sender=":1.1" (uid=0 pid=273 comm="/usr/lib/systemd/systemd-logind ") interface="(unset)" member="(unset)" error name="(unset)" requested_reply="0" destination=":1.418" (uid=1002 pid=19143 comm="/usr/bin/gnome-session --session=gnome-compiz ")
    Nov 07 23:41:07 starlancer dbus[275]: [system] Rejected send message, 2 matched rules; type="method_return", sender=":1.1" (uid=0 pid=273 comm="/usr/lib/systemd/systemd-logind ") interface="(unset)" member="(unset)" error name="(unset)" requested_reply="0" destination=":1.418" (uid=1002 pid=19143 comm="/usr/bin/gnome-session --session=gnome-compiz ")
    Nov 07 23:42:07 starlancer dbus-daemon[275]: dbus[275]: [system] Rejected send message, 2 matched rules; type="method_return", sender=":1.1" (uid=0 pid=273 comm="/usr/lib/systemd/systemd-logind ") interface="(unset)" member="(unset)" error name="(unset)" requested_reply="0" destination=":1.418" (uid=1002 pid=19143 comm="/usr/bin/gnome-session --session=gnome-compiz ")
    Nov 07 23:42:07 starlancer dbus[275]: [system] Rejected send message, 2 matched rules; type="method_return", sender=":1.1" (uid=0 pid=273 comm="/usr/lib/systemd/systemd-logind ") interface="(unset)" member="(unset)" error name="(unset)" requested_reply="0" destination=":1.418" (uid=1002 pid=19143 comm="/usr/bin/gnome-session --session=gnome-compiz ")
    Nov 07 23:42:16 starlancer gnome-session[19143]: Gdk-WARNING: gnome-session: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
    Nov 07 23:42:20 starlancer dbus-daemon[275]: dbus[275]: [system] Rejected send message, 1 matched rules; type="method_call", sender=":1.438" (uid=0 pid=19658 comm="/usr/sbin/gdm-binary ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.439" (uid=0 pid=19664 comm="/usr/lib/gdm/gdm-simple-slave --display-id /org/gn")
    Nov 07 23:42:20 starlancer dbus[275]: [system] Rejected send message, 1 matched rules; type="method_call", sender=":1.438" (uid=0 pid=19658 comm="/usr/sbin/gdm-binary ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.439" (uid=0 pid=19664 comm="/usr/lib/gdm/gdm-simple-slave --display-id /org/gn")
    Nov 07 23:42:20 starlancer NetworkManager[269]: <error> [1352360540.622789] [nm-system.c:924] add_ip4_route_to_gateway(): (wlan0): failed to add IPv4 route to gateway (-12)
    Nov 08 00:19:41 starlancer dbus-daemon[275]: dbus[275]: [system] Rejected send message, 2 matched rules; type="method_return", sender=":1.1" (uid=0 pid=273 comm="/usr/lib/systemd/systemd-logind ") interface="(unset)" member="(unset)" error name="(unset)" requested_reply="0" destination=":1.487" (uid=1002 pid=19809 comm="/usr/bin/gnome-session --session=gnome-compiz ")
    Nov 08 00:19:41 starlancer dbus[275]: [system] Rejected send message, 2 matched rules; type="method_return", sender=":1.1" (uid=0 pid=273 comm="/usr/lib/systemd/systemd-logind ") interface="(unset)" member="(unset)" error name="(unset)" requested_reply="0" destination=":1.487" (uid=1002 pid=19809 comm="/usr/bin/gnome-session --session=gnome-compiz ")
    Nov 08 00:20:33 starlancer gnome-session[19809]: Gdk-WARNING: gnome-session: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
    Nov 08 00:20:36 starlancer dbus-daemon[275]: dbus[275]: [system] Rejected send message, 1 matched rules; type="method_call", sender=":1.507" (uid=0 pid=20280 comm="/usr/sbin/gdm-binary ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.508" (uid=0 pid=20286 comm="/usr/lib/gdm/gdm-simple-slave --display-id /org/gn")
    Nov 08 00:20:36 starlancer dbus[275]: [system] Rejected send message, 1 matched rules; type="method_call", sender=":1.507" (uid=0 pid=20280 comm="/usr/sbin/gdm-binary ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.508" (uid=0 pid=20286 comm="/usr/lib/gdm/gdm-simple-slave --display-id /org/gn")
    Nov 08 00:20:37 starlancer NetworkManager[269]: <error> [1352362837.36005] [nm-system.c:924] add_ip4_route_to_gateway(): (wlan0): failed to add IPv4 route to gateway (-12)
    # cat /var/log/Xorg.0.log | grep -i -e "(EE)" -e "(WW)"
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 22555.361] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 22555.361] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 22555.361] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 22555.364] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 22555.366] (WW) Warning, couldn't open module vesa
    [ 22555.366] (EE) Failed to load module "vesa" (module does not exist, 0)
    [ 22555.367] (WW) Warning, couldn't open module modesetting
    [ 22555.367] (EE) Failed to load module "modesetting" (module does not exist, 0)
    [ 22555.367] (WW) Warning, couldn't open module fbdev
    [ 22555.367] (EE) Failed to load module "fbdev" (module does not exist, 0)
    EDIT: My desktop is started by systemd using graphical.target and gdm.service to start the GDM display manager on terminal 1 (TTY1). My Gnome desktop runs in Classic (Fallback) mode with Compiz and compiz-decorator-gtk for effect. I
    Any idea what might be causing these freezes or what info I can further provide?
    EDIT: Processes in X are apparently not crashing, only the video output is. For example, if I'm running applications with sound, I continue hearing sound though the graphics are completely frozen. Is there a way to refresh the graphics or video card somehow?
    Last edited by amadar (2012-12-20 10:59:32)

    bmanuel wrote:
    I think i got my problem, but i don't know how to solve it: after much troubles i found out that whenever i have an SMB connection with a machine that then goes down/disconnect from network without me unmounting the share BEFORE it, then BOOM, everything freeze.
    I noticed this only because i was sharing a directory with my brother and noticed i had the froze as soon as he got disconnected from the network: so i asked him to power on that machine and.. magic! My machine unfroze instantly!
    But now, how to fix that?! Is it due to my /etc/fstab? Does this really matter with nemo/nautilus mounted shares? This, however, depicts the machine in question (the one that, disconnecting from the network, caused my own to freeze)
    //themachine.local/shared /home/username/mountpoint/ cifs noauto,guest,username=myname,password=mypassword,uid=1000,gid=100 0 0
    At last I found out what's my problem, hopefully your situation is similar so that we can work out a solution on this one.
    THANKS! I'm quite sure this is the reason gnome shell freezes for me as well. I was mounting my box.com cloud with this entry in /etc/fstab:
    # box.com account
    https://www.box.com/dav /home/abtz/Box davfs rw,user,noauto 0 0
    If anyone has an idea for how to fix this, I'm all ears. For now, I'll just remove the entry from /etc/fstab.
    I'm running vanilla Gnome, with only the Frippery shutdown menu and battery remaining extensions installed.

  • EMac freezes randomly, open window turns into broken up jibber

    My eMac freezes randomly, open window turns into broken up jibber (kinda looks like I put a photoshop filter on it or something). I can't force quit when it does this, no error message, I've repaired permissions. Any ideas?

    This doesn't help. but my first thought on seeing your picture was 'addressing bit failure in the video memory'. Unfortunately, as you already know, the video 'card' on the eMac is a chipset mounted to the logic board, and the only repair I'm aware of is replacement. An Apple Service Provider could give you an estimate but unless your eMac is still within the standard one-year hardware warrenty or you purchased the three-year ApplceCare extended warrenty, that's not an attractice cost-benefit tradeoff.
    On the chance that I'm wrong and it's some unusual system corruption, look again for the Hardware Test disc. It can be tricky figuring out where it is; on early eMacs it was always a separate CD, on recent eMacs it's a partition on the Restore DVD, and on models in between, it depends on whether the OS X Install disc was on a DVD or not. You might try booting from your OS X Install or Restore disc using Startup Manager to see if Hardware Test is on a partition.
    If nothing else, booting off the OS X Install disk (as if you were going to run Disk Utility > Repair Disk to check the drive) should further confirm if the problem is in the video hardware rather than in the hard drive's OS: if the broken display appears when booted from the OS X Install disc, it's pretty certainly the video hardware.

  • T500 freezes randomly, often by hdd working applications

    My T500 freezes randomly, but i could repeat this status by using e.g. a anti-vir application or by a defragment software.
    I checked the ram and the hdd, no errors.
    I have installed all newest drivers vor vista 32.
    At the windows event manager are some error logs: 
    - <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    - <System>
    <Provider Name="Microsoft-Windows-WMI" Guid="{1edeee53-0afe-4609-b846-d8c0b2075b1f}" EventSourceName="WinMgmt" />
    <EventID Qualifiers="49152">10</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2009-02-21T17:26:08.000Z" />
    <EventRecordID>4712</EventRecordID>
    <Correlation />
    <Execution ProcessID="0" ThreadID="0" />
    <Channel>Application</Channel>
    <Computer>waenger</Computer>
    <Security />
    </System>
    - <EventData>
    <Data>//./root/CIMV2</Data>
    <Data>SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 99</Data>
    <Data>0x80041003</Data>
    </EventData>
    </Event>
     The next Error ist this (i hope the xml structure meets your requirements)
    - <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    - <System>
    <Provider Name="ACPI" />
    <EventID Qualifiers="49157">13</EventID>
    <Level>2</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2009-02-21T16:49:03.475Z" />
    <EventRecordID>121467</EventRecordID>
    <Channel>System</Channel>
    <Computer>waenger</Computer>
    <Security />
    </System>
    - <EventData>
    <Data />
    <Binary>0000680001000000000000000D0005C0000000000000000000000000000000000000000000000000647ADA001300FFFF9300FFFF73000F0013003A0083001C05A3094C1213008F0163000B0053002F127300130013085B0083008A0213086B42A32AFFFF1318190263000A0053003B0C7300130013085D0083004105A308051113084500130A780033820B0015002C00</Binary>
    </EventData>
    </Event>
     This Error appears often and i dont know what is this. After that the notebook freezes randomly.
    Do you have an idea what kind of problem is that?
    //edit some informations in english:
    Event id 13 http://www.eventid.net/display.asp?eventid=13&eventno=9778&phase=1
    Event id 10 http://www.eventid.net/display.asp?eventid=10&eventno=10041&phase=1
    Message Edited by waenger on 02-21-2009 07:36 PM
    Thinkpad T500 2082-52g
    HDD changed into SAMSUNG HM500LI
    Microsoft Windows 6.1 Built 7600 - Windows 7

    I have no solution for this problem, but i have reinstalled my system and now it works great. The error doesn't exist anymore.
    Thinkpad T500 2082-52g
    HDD changed into SAMSUNG HM500LI
    Microsoft Windows 6.1 Built 7600 - Windows 7

  • Satellite A660-18N freezes randomly

    My Satellite A660-18N freezes randomly mostly when I'm playing games or watching video.
    Also sometimes when I'm just moving the mouse. It does it about 1-2 times a week/2weeks. When it happens the display freezes but the audio plays on for a while and doesn't react to any keypress so I have to manually turn it off and on.
    I don't think it's a graphic card overheating issue as it sometimes happens just a few minutes after I turn on my laptop plus I use a cooler pad as well.

    Hi
    This happens sometimes this means that you cannot replicate this and this means that its really difficult to say what could cause this.
    Theoretically it could be just a software issue. Maybe only the registry is corrupt.
    In such case the new OS installation should be done.
    Of course it could be also related to memory: so test the RAM using some tools like mem86+ or similar.
    Check also the HDD; for that you can use the tool called Drive Fitness Test.
    Greets

  • 1 month Toshiba satellite A505 s6033 freezing randomly and blank screen on startup

    Hi,
    My Toshiba satellite A505 s6033 start freezing last night when I was surfing the internet. After pressing 5 seconds or more the power button the computer turned off.  After that I start it back on but all the lights on body worked except the display.
    After few more attempts I pushed arrow down and the power button the display turned on, but the freezing problem is back. So I thought that is a windows problem and I used the recovery partition to restore the state out of the box state. But the display is randomly blank when I push the start button except the other lights, and after restoring the laptop still freezing randomly in or during the windows is loading.
    When I turn it on in safe mode, it works perfectly fine. When I turn it on normally, it freezes almost right away.
    I bought this computer from bestbuy, but I am an Romanian citizen (sorry for my English), my question is : I can use the International Limited Warranty in my country ? Or what should I do to fix my laptop.
    Kind regard,
    Valentin

    First, sorry because of my English, it is not my language and it's been a while since I had to used it.
    This is happening to me, when I bought the laptop I had a few times that it froze but I thought it was something I did, and it happened once or twice in 3 months, for 9 months, maybe 4 times in the last month, it began to increase.
    Then I thought it could be the temperature, and after a while, 2 months, I didn't had time, I bought a external cooler, but it didn't work... By this time my warranty expired... And thinking it could be dirt, I opened the back, but just by removing it I saw it was clean and put it back, I did nothing but opening... And again started looking for what it could be... Yes, I tried looking here, but I didn't find this topic that time, and now that I don't have the warranty I found it...
    Any one here could help me? What should I do? Is there any way to fix it without buying a new video card? 
    I live in Brazil so its difficult for me to buy parts, I bought the laptop in the states when there, here the hardware are expensive... But if I have, I'll buy... If I have to buy a new one, could you tell me if there is a new one that I can buy that has little difference in price for the one I have and it's better?
    PS: Toshiba from Brazil didn't helped me, I just spoke with then...
    I thank you for any help!!

  • I've been using Firefox for quite a long time now and recently it has started giving some problems. It freezes randomly and doesn't respond to any clicks.

    I am a proud user of Firefox. I started experiencing the freezing problem since i updated to Firefox 18 and now I am facing the same problem with Firefox 19. Firefox does not respond to any of my clicks and then I have to close it using Task Manager. This is happening frequently and randomly. It does not freeze on a particular site or anything else. It just freezes randomly. Please do reply if anyone has a solution to this problem.

    see this:
    [[Reset Firefox preferences to troubleshoot and fix problems|Reset Firefox preferences to troubleshoot and fix problems]]

  • Macbook pro 15" mid 2009 model display "freeze", please help!!!

    I have a Macbook pro 15" mid 2009 model which all of a sudden startet "freezing" everytime i restart it, opens spesific programs, etc, and it is really starting to bug me! Sometimes it takes me 15 minutes to start the computer, and then freezes for another 5 minutes when i try to start i.e word.
    I currently have the Mac OS X 10.6.8 (snow leopard).
    Could this be fixed by a software update of some sort? If not, how can i fix it (if possible at all)?
    Thanks!

    You have provided some good basic information, but I'll need more in order to address our question.
    1. When did you notice this problem? Relatively recently, or have you been having this problem for a while?
    2. Can you correlate the problem with the installation of new software? Which software?
    3. How much RAM do you have? If it's 2gb, that's probably not enough - 4gb is ideal for your unit.
    4. Do you update your MBP with software update? Have you updated your browser and plugins?
    5. Have you cleaned your MBP? Recently, an increasing amount of users have seen improvement by getting dust from your unit.
    6. What programs cause you to freeze, or this happen with all applications? What happens when you notice the freeze? Do you see a spinning wheel? Does the display freeze? Be as specfic as possible.
    I realize this is a detailed homework assignment, but answer as completely as you can. This is an answer to your issue - it's just a matter of narrowing things down.
    Post in this thread!

  • Fresh Install of Windows 8.1 on HP Pavilion a4313w freezes randomly

    I've done four fresh installs of Windows 8.1 on the HP Pavilion a4313 Desktop PC in our home and it always freezes randomly. Even in safe mode, it freezes. I've done hardware tests with BurnIn Test 8.0 and everything including the hardware memory is fine. Antivirus is installed and it's completely updated with Windows Updates. Once I installed the 32-bit version of Windows 8.1 and it still froze. I performed a fresh install, because it would hang sometimes with Windows 7.
    Anyways, I am more then ready and willing to post more information or test results upon request. Anyone have suggestions?

    Hello @buddhapunk36,
    I understand that your computer running Windows 8.1 keeps freezing and you have run the hardware tests and it comes back okay. I would suggest that you try installing the original Windows 7 that came with your computer and see if the freezing continues. If it does continue the the issue appears to be a physical issue. Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html.
    If the issue does not continue then your system may not be compatible with Windows 8.1.
    I would like to thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Macbook Pro (mid 2007) freezes randomly

    Hi all,
    Last week my Macbook pro (2007) started to freeze randomly. 2-3 years ago I added an SSD (64 gb crucial M4) and replaced the dvd drive for an 500 gb HDD. The configuration worked perfectly until last week. My macbook sometimes works for a couple hours and sometimes it freezes just after 30 minutes from startup. Sometimes during an freeze I can use the programs that were open. For example when reading an PDF I can scroll 1-2 pages down/up. When I scroll more than 1-2 pages Preview freezes as well.
    I have done the following things to exclude some frequent problems.
    Set my fan speed to 6000 rpm to exclude an heat problem. The system freezes also with 'normal' temperatures.
    Checked my SDD & HDD on file consistency and repaired the disks with disk utility (booted from Mac Os X install cd). Disk utility reports that the disks are okay. I also checked with Techtool pro on bad blocks and smart status. All seems to be all right.
    Checked my RAM with tech tool
    Reset NVRAM
    Checked console for error messages. There are no messages at all between a couple of minutes before a freeze and a forced turn off/on.
    I haven't installed new software recently.
    Last time when my macbook froze, I had an terminal window open. In this window I could execute some commands, only the most basic. Top, sudo, shutdown etc. didn't work. I could navigate to all folders on both SDD & HDD. But I couldn't see any files, only folders. That is strange right?   
    I think the next step is to change the hard drives for an other (new) one, to exclude hard drive problems. But before I open my Macbook I was wondering if anyone has other ideas to solve this problem. 
    Thanks for any help.
    Bauke

    Back up all data immediately as your boot drive may be failing.
    If you have more than one user account, these instructions must be carried out as an administrator.
    Triple-click anywhere in the line below on this page to select it:
    syslog -k Sender kernel -k Message CSeq "I/O error" | tail | open -f -a TextEdit
    Copy the selected text to the Clipboard (command-C).
    Launch the Terminal application. Paste into the Terminal window (command-V).
    The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
    A TextEdit window will open with the output of the command. Normally the window will be empty. If you get output like this:
    kernel[0] <Debug>: disk0s2: I/O error
    the boot drive is failing, or there's some other hardware fault in the storage subsystem.

  • X freezes randomly, screen turning black or flickering

    Hey everyone,
    I'm having this annoying issue where X freezes randomly, I can't tell exactly when it happens. But when it happens, the following occurs:
    - Screen is frozen, sometimes turns black, sometimes turns black and reappears, but still frozen.
    - Cursor and sound (e.g. music) still works
    - When switching to a new tty (CTRL-ALT-F6), I can log in and restart gdm using
    sudo systemctl restart gdm
    - When I'm in the other tty and trying to switch back to the graphical view, I get stuck completely, not even switching consoles works now.Reset is the only option from there
    - Blindly restarting gnome-shell doesn't work
    I somehow have the feeling, it happens more often when I physically move my laptop, but thats just a gut feeling. It also happens often when my screen is locked and I try to log back in.
    I found this bug report, but its quite old and that doesn't help me: https://bugs.archlinux.org/task/14594
    Any help would be very appreciated, its really annoying to lose my work so often.
    My specs:
    $ lspci | grep VGA
    01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Chelsea XT GL [FirePro M4000]
    Gallium 0.4 on AMD CAPE VERDE
    Last edited by freijon (2014-04-12 10:33:22)

    I can't tell whether they're relevant, but there are some errors:
    journalctl -n 100 wrote:$ journalctl -n 100 | grep ERROR
    Apr 14 22:51:11 arch kernel: [drm:si_dpm_set_power_state] *ERROR* si_set_sw_state failed
    Apr 14 22:51:22 arch kernel: [drm:r600_ib_test] *ERROR* radeon: fence wait failed (-35).
    Apr 14 22:51:22 arch kernel: [drm:radeon_ib_ring_tests] *ERROR* radeon: failed testing IB on GFX ring (-35).
    Apr 14 22:51:24 arch kernel: [drm:si_dpm_set_power_state] *ERROR* si_set_sw_state failed
    Apr 14 22:51:25 arch kernel: [drm:r600_ib_test] *ERROR* radeon: fence wait failed (-35).
    Apr 14 22:51:25 arch kernel: [drm:radeon_ib_ring_tests] *ERROR* radeon: failed testing IB on GFX ring (-35).
    Apr 14 22:51:25 arch kernel: [drm:radeon_pm_resume_dpm] *ERROR* radeon: dpm resume failed
    I uploaded the full logs here: https://www.dropbox.com/s/0x3xed11zr13x … ogs.tar.gz in case anyone would like to check it out.

  • System freezes randomly in Mac OS X Leopard

    I have a problem with my system which freezing randomly. When it freezes, I can still move the mouse pointer around, but I can’t move or open any object on the screen.
    It doesn’t seem to be connected to a particular program since it might occur in various programs. I checked the hardware and also catalogue structures, authentication and so forth with disc warrior. Another odd thing is that I can’t seem to beable to boot from the installation DVD. I’ve looked in the various logs (for example the crash logs), but there doesn’t seem to be any notation of the freezes on any of the logs. Another thing is that I sometime have trouble starting the computer, pushing the on-button doesn’t result in anything. Is there anything else I might try before reinstalling the system?

    Version:1.0StartHTML:0000000179EndHTML:0000016596StartFragment:0000002577EndFrag ment:0000016560SourceURL:file://localhost/Users/svantekarlsson/Desktop/LaunchDea mon.rtf
    Unfortunately, my computer won’t boot from DVD either. I’ve triedlocating the files you mentioned. I cannot find the one in/private/var/run/StartupItems
    Otherwise, they are as follows:
    System/Library/StartupItems     [empty]
    Lib/LaunchDaemons
    com.aladdin.aksusbd.plist
    com.aladdin.hasplmd.plist
    com.paceap.eden.licensed.plist
    PACESupport.plist
    System/Lib/LaunchDaemons
    bootps.plist
    com.apple.airport.wps
    com.apple.airportd.plist
    com.apple.airportPrefsUpdater.plist
    com.apple.alf.agent.plist
    com.apple.AppleFileServer.plist
    com.apple.aslmanager.plist
    com.apple.atrun.plist
    com.apple.ATSServer.plist
    com.apple.audio.coreaudiod.plist
    com.apple.autofsd.plist
    com.apple.automountd.plist
    com.apple.backupd-attach.plist
    com.apple.backupd-auto.plist
    com.apple.backupd-wake.plist
    com.apple.backupd.plist
    com.apple.blued.plist
    com.apple.bootlog.plist
    com.apple.bsd.dirhelper.plist
    com.apple.configd.plist
    com.apple.configureLocalKDC.plist
    com.apple.CoreRAID.plist
    com.apple.coreservicesd.plist
    com.apple.dashboard.advisory.fetch.plist
    com.apple.DirectoryServices.plist
    com.apple.DirectoryServicesLocal.plist
    com.apple.diskarbitrationd.plist
    com.apple.distnoted.plist
    com.apple.dnsextd.plist
    com.apple.docsetinstalld.plist
    com.apple.DumpPanic.plist
    com.apple.dyld.plist
    com.apple.dynamic_pager.plist
    com.apple.efax.plist
    com.apple.familycontrols.plist
    com.apple.FileSyncAgent.sshd.plist
    com.apple.firmwaresyncd.plist
    com.apple.fseventsd.plist
    com.apple.gssd.plist
    com.apple.hdiejectd.plist
    com.apple.hidd.plist
    com.apple.IFCStart.plist
    com.apple.IIDCAssistant.plist
    com.apple.installdb.system.plist
    com.apple.InternetSharing.plist
    com.apple.kdcmond.plist
    com.apple.kdumpd.plist
    com.apple.KerberosAutoConfig.plist
    com.apple.KernelEventAgent.plist
    com.apple.kextd.plist
    com.apple.kuncd.plist
    com.apple.lockd.plist
    com.apple.loginwindow.plist
    com.apple.mDNSResponder.plist
    com.apple.mDNSResponderHelper.plist
    com.apple.metadata.mds.plist
    com.apple.netauth.sysagent.plist
    com.apple.newsyslog.plist
    com.apple.nfsd.plist
    com.apple.nis.rpc.yppasswdd.plist
    com.apple.nis.ypbind.plist
    com.apple.nis.ypserv.plist
    com.apple.notifyd.plist
    com.apple.ocspd.plist
    com.apple.ODSAgent.plist
    com.apple.pcastagentd.plist
    com.apple.PCIELaneConfigTool.plist
    com.apple.periodic-daily.plist
    com.apple.periodic-monthly.plist
    com.apple.periodic-weekly.plist
    com.apple.portmap.plist
    com.apple.RemoteDesktop.PrivilegeProxy.plist
    com.apple.ReportCrash.DirectoryService.plist
    com.apple.ReportCrash.plist
    com.apple.ReportCrash.SafetyNet.plist
    com.apple.RFBEventHelper.plist
    com.apple.RFBRegisterMDNS_RemoteManagement.plist
    com.apple.RFBRegisterMDNS_ScreenSharing.plist
    com.apple.scsid.plist
    com.apple.seatbelt.compilerd.plist
    com.apple.securityd.plist
    com.apple.service_helper.plist
    com.apple.smb.server.preferences.plist
    com.apple.smbfs_load_kext.plist
    com.apple.spindump.plist
    com.apple.stackshot.plist
    com.apple.statd.notify.plist
    com.apple.syslogd.plist
    com.apple.systemkeychain.plist
    com.apple.SystemStarter.plist
    com.apple.taskgated.plist
    com.apple.update.plist
    com.apple.usbmuxd.plist
    com.apple.UserNotificationCenter.plist
    com.apple.uucp.plist
    com.apple.webfilter.plist
    com.apple.WindowServer.plist
    com.apple.xgridagentd.plist
    com.apple.xgridcontrollerd.plist
    com.vix.cron.plist
    comsat.plist
    eppc.plist
    exec.plist
    finger.plist
    ftp.plist
    login.plist
    nmbd.plist
    ntalk.plist
    org.amavis.amavisd_cleanup.plist
    org.amavis.amavisd.plist
    org.apache.httpd.plist
    org.cups.cups-lpd.plist
    org.cups.cupsd.plist
    org.isc.named.plist
    org.net-snmp.snmpd.plist
    org.ntp.ntpd.plist
    org.postfix.master.plist
    org.samba.winbindd.plist
    org.x.privileged_startx.plist
    shell.plist
    smbd.plist
    ssh.plist
    telnet.plist
    tftp.plist

  • Nokia 5310 - Display freeze problem

    Hi,
    I got a new Nokia 5310 last week and its doing great and i like it a lot, except for the following problem..
    Problem description:
    I find the phone display freezed and become grey and stopped responding to any keys..
    this happened first time (on day two) with low battery and then started observing it frequently now (once in two days), when the phone is left with screen saver..,
    at this state, when a call is made to phone, caller can hear the phone is ringing, but the phone is still dead..,
    the only way to correct this is, remove the battery and reboot the phone.,
    Query:
    before going to nokia care centre, will this be a firmware bug (based on reported problems) or hardware bug(specific to my handset)??
    thanks in advance for the help.
    regards
    deva

    please check this version is available version 3.63 if not u need to update.any body has any suggestion for this issue.
    tongue is too confused on what to speak

  • Re: Tecra S10 and S11 freeze randomly

    We have several Tecra S10's and S11's. They freeze randomly during the day. Some even twice within half an hour, others spread it out through the day.
    The Tecra's are all Windows 7. Some have 64 bit, others a 32 bit installation. After the Windows 7 installation we removed additional software we don't need, like McAfee, Toshiba goodies (Assist, Tempro, etc), Ebay, etc. After that we activatie Office 2007 and we Microsoft-update the the laptops. So far so good.
    However, after a week or two just simply working in Word causes the Tecra to freeze. Even ctrl+alt+del is not working. The Tecra has to be forced to shut off by holding the power button down.
    Does anybody recognize these 'frozen moments'. It's very anoying.

    > All notebooks are in an Active Directory domain Windows 2008.
    Thats the reason why I asked if notebooks are connected to some company LAN.
    I saw somewhere on this forum that similar issues were noticed in the same situation. Notebook was somehow blocked when was part of domain.
    Probably some data exchange between notebook and server was responsible for this blocking and freezing issue.
    I really don't know what to say. If you have several notebooks with the same problem I recommend you to contact nearest authorized Toshiba service provider and ask for help. You know they have contact with Toshiba people and if there is something serious they can help you with this.
    I really don't believe some long discussion here will help you much.
    If your local administrator cannot find out what the problem can be than you need professional help.
    Do you agree with me?

Maybe you are looking for

  • Run_report_object is giving error

    I am tryimg to run report. In Form Builder i have a report obgect 'report_numb1' In my procedure i am using pl_id paramlist; report_job_id VARCHAR2(100); BEGIN I have some parameters passed to the report Add_Parameter (pl_id, report_job_id := RUN_REP

  • FDM 9312 Variance Analysis report and columns 1 off in xls

    Hi, I have a variance analysis report in FDM and when i run in HTML and PDF, all the columns are aligned/formatted fine. But when i run it in xls, the columns are one off. Has anyone seen this before or experienced this. Thanks, Azmat Bhatti

  • CC Installation Issue

    How do I grant Administrator Privileges (on my computer) to allow the installation of CC programs?

  • How to get list of approved MSU for specified target group

    Hello guys, I have question about WSUS on windows server 2008 r2 sp1. I need to get list of approved MSU for specified target group only for windows server 2008 r2 sp1, but I don't know whole syntax. I can get list of approved updates for w2k8r2sp1:

  • Errors in my temperature converter

    Today I am playing with a class that converts Fahrenheit to Celsius. I understand that the formula for Fahrenheit to Celsius is: (5/9)*(deg F-32) Here is my class: import javax.swing.JOptionPane; public class TConverter {      public static void main