Display full length of vendor name in report !

Dear all,
as i know, we can enter up to 50 chars into Vendor name field in Vendor maintain screen (FK01).
But, when i check in Vendor balance (FK10N), Line item display (FBL1N) only 35 chars of Vendor name is displayed.
please help to show me how to show full length (50 chars) on those reports or which report should i use to see full length of Vendor name !?
many thanks !

As per my knowledge you can enter only upto 40 characters in name field in Vendor maintain screen (FK01).
The same will also show up in FK10N and FBL1N

Similar Messages

FI Report to display Profit center and Vendor name

Hi,
We are using 6.0 version.
Can you please suggest a Standard report which can give me the Actual line items with GL line item detail with Vendor name & Profit center.
FAGLL03, is not giving me Vendor name.
Please advise.
Thanks,
Pavan.

Hi,
This FAGLL03 for GL account line item display.
Here you can see all the GL account for example if you are looking Salary accout how you will expect th vendor name over there.
Vendor display is different area right
FBL1N
If you want add vendor in the FAGLL03, the go to SHD0 added vendor name there and complete the steps
Warm
Shiv

Display full length

Hi All,
In my report i given selection-screen as
SELECT-OPTIONS: S_PSPNR FOR PRPS-PSPNR. " WBS ELEMENT
But when i use 'F4' i will get data with legth 18 .Actually some of data having WEB element length as 24.
example :while f4 i am getting following WEB element
'CL-00002-FROFR05TP' lentg(18) instead of 'CL-00002-FROFR05TPT01001' having lenght (24).Actually WBS element length as 18 with visible lenght as 24.
I need to display total 24 charcter length in selection screen instead of 18.I tried statments as
SELECT-OPTIONS: S_PSPNR FOR PRPS-PSPNR VISIBLE length 24.
can anybody tell me how to try this one.I heard that we can try in dialough module program.Is there any option to solve my issue.Please do needful help ASAP.
Abhi.....

Hi Shaik,
I think it is not possible to display the full length.
But you can do the following create a variale of length 24 & use it in the selection screen declaration. There you can provide Serach help for the selection screen by using At Selection-Screen Event.
e.g.:
DATA: c(24) TYPE c.
SELECT-OPTIONS: s_pspnr FOR c.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_sno-low.
Select Satatement.....
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_sno-high
Select Satatement.....
Reward points if helpful answer.
Ashven

Fbl1n and fbl5n line item wise display the cutomer and vendor name

Hi,
My user is asking report for fbl5n and fbl1n line itemwise dispaly vendor and customer.See the report for one time vendor and customer name displaythe line item wise display in FBL!N/FBL5N. but not the display the regular vendors/customer.So one time table name BSEC
Please advise
Regards.
Edited by: yps y on Nov 13, 2008 1:26 PM

Hi,
line item reports FBL1N/FBL5N are reading the line items (wow, what a big surpise ) and displaying information on line item level.
As the vendor/customer name is NOT stored in the line items, you cannot display this in the lines (along with other item level information., like amount, posting key, doc.type, etc.). You may find a field called "Name 1) in the field catalog when configuring the ALV layout but this is empty for normal customers/vendors. It is only filled in for one time (Cpd) customers - the reason is as explained above: for these special accounts, the name IS stored on line item level (it varies from item to item),, that's why it can be read and displayed in the items.
Now how about normal customers/vendors?
You have to activate Business Transaction Event 1650 and implement a simple code so that depending on the account type (D = customer, K = vendor), you get the business partners name from table KNA1 / LFA1 and put it into field Name1.
Hope that helps, points welcome
Csaba

ITunes 8.1 Cover Flow - Won't Display Full Album Titles/Artist Names

I don't understand why Apple would change Cover Flow to display less characters than before, but many, many artists/albums aren't showing complete titles, with an elipse marking where it gives up. There doesn't seem to be a universal character limit either, as, bizarrely, a few short titles like 'Come On Pilgrim' aren't showing either.
Does anybody else suffer from this problem? Is it fixable? If not, I think I'll be rolling back.

Just to add, when the album is selected on my ATV, all track names are shown so they're obviously in the system. It's only when they start playing that most of the time I just get 'Track 4' etc.

Vendor Name in FBL1N report

Hello,
How can we add vendor name in report layout of FBL1N (vendor line item display)? I tried to do define it in additional fields for line item display in customization.
But the table LFA1 is not defined in table T021S. Is it possible to add tables apart from BSEG, BKPF which are already there.
Regards,
TP

Hello TP,
If you want to append additional columns like LFA1-NAME1 to FBL*N report, please refer OSS note below.
Note 984305 - Line item: Definition of special fields (T021S)
Regards,
Burak

Names in report painter

Hi,
Can anyone explain where & how the vendor name is mapped in report painter?
I want to derive the vendor name in report S_AC0_52000888 (report:8A4-0012) from Name 3 & Name 4 which is updated in Vendor master.
I have checked this report it has been given the characterisitic as Vendor with variable from table GLPCOP-LIFNR (Account Number of Vendor or Cr)
I am surprised to see that it has been given vendor account number field but still report output is displayed with vendor name (Name1).
Regards
SMP

Hi ,
Please Execute the Transacrion S_AC0_52000888 and then see below Screen
Now click on lead column and see below screen
Many Thanks

Display the Customer/Vendor Name in the General Ledger Report

**I have Questions about General Ledger Report in SAP Business One. How can Display the Customer/Vendor Name in the General Ledger Report.**
*Just would like to ask if its possible to display the Customer/Vendor Name in the General Ledger Report? The format simply have the Customer/Vendor Code on the said report. Is there a work around on this?*

If ur selection creteria by g/l account,u can display customer/vendor name by including
offset account from form settings.

Display the Customer/Vendor Name in the Check Register Report

Just would like to ask if its possible to display the Customer/Vendor Name in the Check Register Report? The format simply have the Customer/Vendor Code on the said report. Is there a work around on this?
Thanks...

Llowen,
You may develop a Query like this
SELECT T0.CheckNum, T0.PmntNum, T0.VendorCode, T0.VendorName, T0.TaxDate, T0.CreateDate, T0.PrnConfrm, T0.CHECKSUM FROM OCHO T0
WHERE T0.Canceled = 'N' AND (T0.CheckDate BETWEEN '[[%0]]' AND '[[%1]]') OR (T0.CheckNum BETWEEN '[[%2]]' AND '[[%3]]')
Suda

Display Vendor name in vendinvoice Report

hi expert i have little query , in ax 2012 R3 there is report vend-invoice Report, actually i want to display vendor name on that report,by default there is no vendor name,for this i just added vendor name(extended data type) in vendinvoice temp table,and
then just reference that field in class of vendinvoice,rebuild the ax,and in vs2012 add that field in report design ,and depolye ,but still the vendor name not does not showed in report...plz guide me..
Regards.

Hi Munsifuv,
Is this a question about Power Query? If not, I'd recommend directing your question to a Dynamics Ax forum.
Ehren

Supress Vendor name in std report S_ALR_87012103 - Vendors: Items

Hi ,
I am using report 'S_ALR_87012103 - Vendors: Items -> List of Vendor Line Items' to list the vendor open items and in the output the vendor name with address is displayed, I want to supress name and address so that when I download to excel it will easier for me to change the columns.
Than

Try using FBL1N instead of this report, which does not show address.
Regards,
SDNer

In Payment Order Vendor Name Display

Hi All,
Is it Possible to view the Vendor name in the Payment order, as now we able to see the vendor code only.
We required vendor name in the payment order(F110).
Anyone have idea pls update me.
Regards,

hi,
If you are talking about report output then Open your query in query designer, click on vendor, on the right hand side you will see display tab and in display as list box choose key and text. This will display your vendor name as well with its code.
Hope this helps
regards,
ray

Vendor name not showing correctly in TDS GL line item display fbl3n

Hi Gurus,
I am facing an issue in regards to TDS. As you know that normally we make a cheque payment to a vendor, we issue one cheque for one vendor.
But my client follows a slightly different practice. Suppose they have to pay an amount of 30000 to three vendor A B C equally 10000 each. They right a self cheque to the SBI bank and also send them the list of these 3 vendors who are also having their account in the same bank. They instruct the bank to take money from their account and then credit in the respective vendors account.
Now the transaction goes like this:
Vendor A   10000
Vendor B    10000
Vendor C   10000
    To Bank                 29700
    To TDS on A              100
    To TDS on B              100
    To TDS on C              100
Now when the user will go to FBL3N and check the TDS GL 100020196 and see the line items it should show like as per the client:
Vendor A       100
Vendor B       100
Vendor C       100
But it shows the below result:
Vendor A   100
Vendor A   100   ( should be vendor B)
Vendor A   100   (should be vendor C)
I believe that is the standard behavior of the system to show the vendor line. They do not want to change the way of their posting and their concern is if it shows like the same at the time of return filing how will know vendor wise tds.
Now either I need to resolve this situation in FBL3N or give them a report which should give them Vendor wise TDS information for the TDS filing.
J1INMIS report is there but it shows only the TDS and the vendor number, it does not give the vendor name. I either want a solution of this issue in FBL3N or a report which shows vendor wise TDS with vendor number and name. Please let me know if there is a solution to this issue.
Kindly consider this very urgent. I am attaching the relevant screenshots.
Thanks
Urmila

Hi
Unfortunately there is no report in SAP other than J1INMIS which caters to Indian reporting requirements. You can think of enhancing the same.
Also check your enhancement for FBL3N as to why it is not working as it should with the help of your ABAP Colleagues. It is not displaying the name correctly.
Thanks & regards
Sanil Bhandari

Cost center report with Vendor name

Hi All,
I need a cost center report which shows Vendor name and number.
I tried with report S_ALR_87013611 but it is not displaying Vendor name for the expenses which is posted in MIGO.
It is showing the offset A/c as GR/IR clearing a/c.
Any other report or query I can make this.
Thanks in Advance.
Regards
Shanu

Hi Shanu
There is a workaround
When you post expense Dr to Vendor Cr - Use substitution exit RGGBS000 and populate Vendor no / name in a Text Field like SGTXT/.. You need to write FI Substitution in OBBH for this
After this, implement the exit COOMEP01 to fetch SGTXT in CO Line item reports KSB1... It will also be visible in S_ALR reports
Include SGTXT in the Structure CI_RKPOS
Sample code of COOMEP01 is as below
The code is written in include ZXKAEPU01 of EXIT_SAPLKAEP_001
SELECT SINGLE vbel2 SGTXT FROM bseg
INTO (cs_record-vbel2, cs_record-SGTXT)
             WHERE bukrs = cs_record-refbk
               AND belnr = cs_record-refbn
               AND gjahr = cs_record-refgj
               AND buzei = cs_record-refbz.
br, Ajay M

Problem related to display column's full length as default in table control

Hi Experts,
I have a screen in report program. In that a table control has been designed.
Now the issue is that when report program has been executed and the table control screen is called on a particular action then the table columns full length is not visible as default however when i checked the screen layout the default and visible length of colum header and column field is as per required.
For example - We have a Period field with default length as 6 and visible length as 15. Its column header is Period with both default length as 15 and visible length as 15.
The period field has an internal table field reference and its format is NUMC.
While column header Period is Text field created of type CHAR.
Please suggest. Any help or inputs will be highly appreciated.
Thanks,
Akash

Hi
set cursor field 'WA_CODFOD-C_NOTE_NO' line mline.
The value of MLINE can be from 1 and N, where N is the number of the lines shown in the table control, so if your table control can display 5 line, MLINE will be from 1 to 5.
Now you need to create the link between the line of the table control and the line of internal table, the rule is:
Internal Table Line = <table control>-TOP_LINE + <table control line> - 1.
Max

Display full length of vendor name in report !

Similar Messages

Maybe you are looking for