Display Generated Objects Issue
Hi,
This is a weird situation. I am unable to view any of the Info sources or Info packages generated through "Generate Export Data source" option in ODS. We are doing a full upload into an ODS and later doing a delta from the ODS into a cube. If I right click on the ODS and manually select the option to update data target, it works fine, but I have to schedule the pack in a process chain.
I have enabled the option "Show Generated Objects" in administrator workbench, still nothing shows up under data marts. I am using 3.0B version.
Any help is appreciated.
With Regards,
Hi Anil,
Thanks. I tried that, but it did not work.
In the root of info sources, I selected "Insert Lost Nodes" option from context menu, which solved the problem.
With Regards,
Similar Messages
-
Display generated objects in BW 7.0
Dear Experts,
I wanted to display generated objects in BW 7.0 In 3.x it was possible to activate this setting via "settings -> display generated objects". I cannot find the setting in the BW 7.0
Can someone give me an advice?
Thanks in advance.
MartinaHi, have you checked if your 8* object is visible when you search for it? If you can check and just let us know, have checked my end and it is visible but see your point re the option from Settings menu
Thanks -
Problem trying to display generated objects
Hi,
I am trying to display generated objects in my Development 3.1 BW, this system does not have enough memory to work with a lot of data o processing.
I need to create an infopackage from an 8 Infosource, but when I select the option "show generated objects" the system show me the following error: STORAGE_PARAMETERS_WRONG_SET
The current program had to be terminated because of an
error when installing the R/3 System.
The program had already requested 390086656 bytes from the operating
system with 'malloc' when the operating system reported after a
further memory request that there was no more memory space
available.
The basis told me Parameters are correct with respect to a SAP note.
I want to know if there is another option to find the specific Infosource and create the Infopackage.
I appreciate your helps.
Regards,
VictoriaHi ,
The only way to create infopackage is after the 8 infosource gets displayed.
The problem is with in the BW system...
this could be due to some temp table spaces..
Moreover chk whether u r able to search the other export datasources in BW.
thanks
Aamer -
If froms the Tools menu I choose to show rather than hide Generated Objects what does this do? Thanks
Hi Niten,
it will show you the datasoures and infosources generated out of ods-objects and cubes starting with the 8....
regards
Siggi -
We are not able to display system generated infosources and infopackages in the Infosource DM (Datamart) application component.
I have tried Settings --> Display Generated Objects, and set to Show, but this does not generate any application components. This feature does work, however, in our other development and QA clients.
Any thoughts?
Thanks
ChadIs the DM Application Component normally transported through to Production, or is it activated in the target client?
After further review of active Business Content in our production client, the Application Component DM is not shown as active. Guess that could be the problem!
Please confirm if we can simply transport up the DM application component.
Thanks! -
Hi All,
When we do a test-outlookconnectivity -protocol:http the result is a success but then we get the following:
ClientAccessServer ServiceEndpoint Scenario
Result Latency
(MS)
xxxxxxxxxxxx... xxxxxxxxxxxxxx Autodiscover: Web service request. Success 46.80
WARNING: An unexpected error has occurred and a Watson dump is being generated: Object reference not set to an instance
of an object.
Object reference not set to an instance of an object.
+ CategoryInfo : NotSpecified: (:) [Test-OutlookConnectivity], NullReferenceException
+ FullyQualifiedErrorId : System.NullReferenceException,Microsoft.Exchange.Monitoring.TestOutlookConnectivityTask
So it looks like it's not completing successfully.
I can't find anything on this in particular, and don't really know how to go about solving it - We are fully up to date, Exchange 2010 Sp2 with Rollup 5-v2
Any help appreciated!hi,
I have the same issue also on Exchange 2010 SP2 RU5v2
I ran your command and get the below
[PS] C:\Installs\report\Activesync>Test-OutlookConnectivity -Protocol:http |FL
RunspaceId : ebd2c626-1634-40ad-a17e-c9a713d1a62b
ServiceEndpoint : autodiscover.domain.com
Id : Autodiscover
ClientAccessServer : CAS01.domain.com
Scenario : Autodiscover: Web service request.
ScenarioDescription :
PerformanceCounterName :
Result : Success
Error :
UserName : Gazpromuk.intra\extest_645e41faa55f4
StartTime : 8/21/2013 4:08:50 PM
Latency : 00:00:00.1250048
EventType : Success
LatencyInMillisecondsString : 125.00
Identity :
IsValid : True
WARNING: An unexpected error has occurred and a Watson dump is being generated: Object reference not set to an instance of an object.
Object reference not set to an instance of an object.
+ CategoryInfo : NotSpecified: (:) [Test-OutlookConnectivity], NullReferenceException
+ FullyQualifiedErrorId : System.NullReferenceException,Microsoft.Exchange.Monitoring.TestOutlookConnectivityTask
Any help would be greatly appreciated, I also get random failures of OWA, EAS and web services, very frustrating
I have no errors in the app event log
thanks
Faisal Saleem Windows Systems Analyst 07595781867 -
How do I display AS3 Object in only one state?
I created a AS3 object from a SWFLoader class as an animation, which I then place in a Flex stage. I need to display the object programmatically in only one state but there is no "includeIn()" method to include it in just one state.
Right now, it is showing up on all of the flex states. I add this object at different times and positions in the state. Everything is fine except it displays in all the states.
How do I display a AS3 object in only one state?
Thank you.When i use visible property as you suggested, it works, but only on one object. I am generating more than one of these objects, so there could be 3 or 4, etc of these objects displaying concurrently at different x y positions in the state.
Is there a way to grab all of the objects created by this AS3 class at once and apply the visible property?
thanx -
Unable to find generated objects in repository - Activating BE
Hi,
I´m trying to migrate MAM from Mobile 7.0 to Mobile 7.1.
I got to import the syncbos as data objects successfully. However, when I try to activate a Backend Adapter, the error: "Unable to find generated objects in repository" comes up.
I applied the note number 1408036, which is to correct the issue, but it didn´t work (I´ve already re-started the server). We working on Mobile 7.1 - SP08.
Anyone has some clue for this problem?
Thanks.Hi,
have you done the [DOE inital setup|http://help.sap.com/saphelp_nwmobile71/helpdata/en/45/17a790d8000064e10000000a1553f7/frameset.htm]?
have you activate the data object?
if dont,please do that,
than try to activate the backend adapter.
regards,
lakshman balanagu
Edited by: lakshman balanagu on Dec 4, 2009 12:13 PM -
The creation of device local data objects - Unable to find generated object
Hi all,
I get an error when I try to generate an ESDMA containing a "Device Local" data object.
I have created a "Device Local" data object containing a very simple node structure. The object is "active" and everything seems to work fine, until I generate the ESDMA. The following error is shown : Unable to find generated objects in repository.
The esdma is generated without problems, when I remove the device local data object.
I hope you have some ideas of what the issue might be.
Best regards,
NimaHi Siva
Actually i am working on this problem together with Nima and the problem is not related to SAP Basis objects.
The problem is in SDOE_WB, with the SWCV. Creating a Data object of type LOCAL DEVICE and a NODE. If you add a field/s and then activate, and look in Generated objects The Table object is not generated (only the structure and the table type). At this point there are no syntax/error messages.
If we try to generate an esdma using the ESDMA design time, using this SWCV, it fails, with the message, Unable to find generated objects, in the repository. That is it is looking for the Table object that was not generated in sdoe_wb. This is only a problem with creating a data object of type DEVICE LOCAL, every other type of DO is fine.. I assume it is an SAP error. -
How can we assign sproxy generated objects to a different package?
Hello Expert,
We need to change the package assigment of sproxy generated DDIC objects. How can we assign sproxy generated objects to a different package?
Regards,
ThulasiAny idea?
-
Middleware:-Getting an error while generating objects
Hi experts,
While generating objects as part of middleware generation in CRM 5.0 i am getting errors in transaction "GENSTATUS" because of which i am not able to perform my initial load and the error message is "TIME LIMIT EXCEEDED". Also i am getting a short dump for that.
Is there anything new in CRM 5.0 which needs to be done that was not there in CRM 4.0.
Can anyone help me on how shall i proceed.
Thanks,
RahulHi Natarajan,
The above mentioned note is for an upgrade and not for new installation and even after doing it my problem is not resolved.
Does anyone know how to remove the error that i am getting in transaction "genstatus".
Regards,
Rahul -
In the metadata repository, display the object detail links don't work
We've upgraded to 7.3 and when we lick on display the object details links we get the following message. I've looked in SICF and everything looks active and is set up
Service cannot be reached
What has happened?
call was terminated because the corresponding service is not available.HI LMM
I have also same Problem . I thing SICF is working fine but SAP BW 7.3 Metadata Repository is not available (Not maintained) the corresponding service is not available that why System shows An error.
Regard's
R.S.Reddy -
Safari doesn't display an object with MIME type video/mp4
So, I've got a little hiccup here. I put together a CV in html with samples you can click to bring up. Now, I don't make any claims to professional geekdom, but I try to be fairly html savvy, and since I'm sending this to the college IT guys, I want to do it right. So I'd like this thing to use valid w3c compliant html. Not too tough, fix some missing quotes and learn how to use the object tag instead of embed. Done.
Well, here's the problem. I loaded it into Safari for testing, and a Quicktime file won't play. Now, it runs fine on Firefox. The obtuse and awkwardly lumped in IE version of the object works fine (tested in IE6, Win2K virtual machine). And the same file ran fine when I had it using an embed tag. Now it just brings up the Quicktime emblem, takes up the specified amount of space, and doesn't do anything.
What did I do wrong? I've got the latest Quicktime and Safari, and I know it's standards compliant. Do I have to feed it some more specific type for an h.264 encoded mp4?
Here's the code I used. The embed tag is the one that works, the object tag is the compliant one that doesn't. I'm guessing I'm missing a parameter or something. Any advice?
<embed scale="1" src="files/Sabres.mp4" pluginspage="http://www.apple.com/quicktime/download/" autoplay="FALSE" volume="100" cache="TRUE" height="496" width="640">
<object type="video/mp4" data="files/Sabres.mp4" height="496" width="640">
<param name="controller" value="true">
<param name="autoplay" value="false">
Your browser cannot display this content. Click here to download it.
</object>Tom and Kirk, thanks for your time. That would work, but since <embed> is a non-standard tag, I want to avoid it.
Andy, I actually stopped by that site last night, and I did use it for the object code.
My problem is that for some reason, what looks like a legitimate implementation of <object> isn't displaying in Safari. I know Firefox is a bit more forgiving of sloppy code, so I don't blame Safari for that one. I know Safari can display the file because it displayed it properly when I called it with embed. I'm just not sure what's wrong with the code that's making Safari not bring up the video. It knows it's Quicktime and loads the file, I know that, because it brings up the emblem and starts hoarding RAM when I bring it up in Safari, but it just holds there. I've tried a couple MIME types, including video/quicktime and video/mp4, both worked in Firefox, and video/h264 just as a shot in the dark, and both Safari and Firefox showed the alternate content.
By the way, here's the full code I used to display the object, using Castro's cloaking technique for IE compatibility. I omitted it earlier because when I isolated the non-IE section alone in the body of the document it behaved the same as it did with the cloaking (working in FF, broken in Safari).
<!--[if IE]>
<object classid="clsid:02BF25D5-8C17-4B23-BC80-D3488ABDDC6B" codebase="http://www.apple.com/qtactivex/qtplugin.cab" height="496" width="640">
<param name="src" value="files/Sabres.mp4" >
<param name="controller" value="true">
<param name="autoplay" value="false">
</object>
<![endif]-->
<!--[if !IE]> <!-->
<object type="video/mp4" data="files/Sabres.mp4" height="496" width="640">
<param name="controller" value="true">
<param name="autoplay" value="false">
Your browser cannot display this content. Click here to download it.
</object>
<!--<![endif]-->
Message was edited by: The Spine -
BB Flip External Display Caller Notification Issue
Hello-
I have owned this phone for approximately two weeks; and until today it was working perfectly. As of today the external display is no longer working for "caller ID" or incoming call notification. The temporary fix was to disable the "auto answer" function for convenience, although this does not truly solve the problem.
The question is how can I restore the external display as it was working prior to today with the display of "caller ID" incoming call notification? Incoming emails, SMS previews; continue to work properly on the external display, and the issue appears to be isolated to incoming call notification.
Is this a bug with the device, or is their a fix to the problem?
Any help or guidance greatly appreciated.
Message Edited by skilltel on 11-03-2008 09:05 PM
Message Edited by skilltel on 11-03-2008 09:06 PM
Message Edited by skilltel on 11-03-2008 09:06 PM
Solved!
Go to Solution.Hi and welcome to the forums!
Did you try the battery pull we talked about?
Thanks,
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure. -
Display all objects used in a program
Hi guys,
i want to create a Zprogram to Display all objects used in a program.
is there any class that can help me plzzz.
CL_WB_PGEDITOR
CL_WB_TBEDITOR.
CL_WB_EDITOR.....
thksHi Oubaha,
You can use SE80 to display objects used by a program.
Regards,
Chester
Maybe you are looking for
-
Missing Authorizations Scenario (SU53) in GRC AC 10
Hello Gurus, Good evening !! I was wondering how can GRC AC 10 system help when an end user has missing authorizations ?? General scenario is if an end user hits a transaction and gets "Not Authorized" , he will send a SU53 screenshot and depending o
-
Manually deleted a java application - now getting errors
Hello I mistakenly started deleting an application manually instead of going through Enterprise Manager, now I'm getting error messages whenever I try to manage any of my oc4j instances and deploying ear files. We are running Oracle 10g Application S
-
How to get Swings output in HTML?
HI, I am very new to Swings Technology. I know how to display an applet in HTML page. But the Swing I am using is a stand-alone program which displays the Tree Stucture of a selected Directory. I am able to run my Swing program as a stand-alone progr
-
Hello freinds, What is the purpose of Valuation class? Can we assign n no. of gl accounts to the same valuation class and can we create n no. of valuation classess and can we assign no of valuation classess to the same material master. 1. We have 5 g
-
hi , i am trying to run an applet which retrieves data from a database server, I am getting the following exception in Internet Explorer com.ms.security.SecurityExceptionEx [oracle/net/nt/TcpNTAdapter.connect]: cannot access "host":port in Netscape N