Display getting clipped when using 26" TV as monitor

HELP! I recently connected my Sony LCD TV to my single G5 PowerMac as a monitor with a DVI to DVI cable. The resolution is excellent, but the margins of the desktop are getting clipped. So for instance, the menu bar at the top of the screen is NOT visible!! The dock is also partially clipped. The right and left edges are less noticeable. I've tried playing around with the resolution settings and the color sync utility, but nothing is working. Any suggestions?

I've looked through the TV manual, and there's no mention of turning overscan on/off. I'm also running with the stock NVIDIA 5200 video card, and NVIDIA's TV Tool doesn't seem to work with Macs. Finally, I have the option of turning overscan on/off if I connect my G5 to my TV via s-video, but not with a dvi cable. Does that make any sense??

Similar Messages

  • IPhone4S display unknown symbol when use USSD

    please when i used iPhone4S display unknown symbol when use USSD ???
    NOT : i dont know why cose as same time i have iphone 4 and used same carrier but  its WORK FINE AND show ussd

    iPhones no officially support USSD but I can sure it is support USSD because my friend's iPhone is work with USSD.
    I and my friend using same carrier same iPhone4S same codes,no JB but my friend's iPhone is work with USSD,only my iPhone cannot work with USSD.
    Thank for all answer,no need answer for me already because I just now send to apple store,they check is phone problem,so now claim warranty,need to wait 2 week to get back new iPhone =.="

  • Putting iMac display to sleep, when using TV as a screen.

    I have just connected my iMac to my 42" Panasonic 1080p TV, the connection was easy and is working fine. My questions relates to putting the iMac display to sleep when using the TV as a monitor, if I am watching You Tube, Sky Player or a DVD, I intend to use my TV as the monitor. Is it possible for the iMac to puts its display to sleep, whilst leaving the TV on. I played around with this today, however was unable to manage this.
    Regards Craig

    Hi Craig
    There is no way to independently sleep either the iMac's Display or an attached Display/TV. However if in the Display Arrangement Preferences you set the attached Display or TV to be the Main Display and turn Mirroring Off, then FrontRow and the Full Screen Mode app's like, DVD player, QuickTimePlayer, etc. will black out the unused iMac display.
    Dennis

  • HT201335 I can only get audio when using airplay through sky go on my apple tv on iphone 4

    I cn only get audio when using airplay through sky go on my apple tv on iphone4. Any ideas?

    Sky go is an app that does not support video AirPlay, not all apps do.

  • My iPhone was getting hot when used or charging. Went to Apple in Portland, OR.Phone making random sound. Why??? How do I make it stop????

    My iPhone was getting hot when used or charging. Went to Apple in Portland, OR. I did a reset on the phone. My IPhone is now making a random sound. Why??? How do I make it stop???? I have turned off all notifications. I do not have life360 or Skype. I do have Facebook, WordsFree, ScrabbleFree, Pandora.

    I did the reset. I updated the iPhone to 6.0. The alert sound stopped for a while then started again. I had to go to notifications a few times to turn off some of the alerts and now I have peace, plus I learned more about the notifications. Thanks for your help. I did not need to go to the Apple Store.

  • I pad  get hot when using or charging what's wrong?

    my ipad gets hot when using & charging  - what's wrong/ also, the chrger gets hot enough that i unplug it

    Not normal. Take it to an Apple Store for evaluation.
    Make a Genius Bar Reservation
    http://www.apple.com/retail/geniusbar/
     Cheers, Tom

  • WHY THE IPHONE GETTING HOT WHEN USING 3G PLUS WITH DATa?, WHY THE IPHONE GETTING HOT WHEN USING 3G PLUS WITH DATA?

    why my iphone 4s getting hot when using 3g plus with data?
    then my phone left side speaker didnt work when i list songs?

    It is normal for the phone to get hot when your using data such as YouTube videos, streaming music etc.. And as for the left speaker not working, the left speaker is a microphone, the right one is for sound. Don't worry, everything your iPhone is doing is normal.

  • Trouble with my ipod getting hot when useing instagram app and also problems with my ipod closeing and returning to home screen unexpectedly?

    when i'm useing my ipod and i'm useing the instagram app. I feel my ipod starting to get really hot. i am also having problems useing app and them all a sudden closing on me and ipod will return to the home screen

    It is not unusual for the to get worm when using some apps.
    For the app problem see:
    iOS: Troubleshooting applications purchased from the App Store

  • Getting dump when using do_sum in alv field cat in the output of the report

    Dear Freinds,
                 Iam getting the alv report when i click on the segma field (Sum) on my salary
    field iam getting dump. and also if i try to print my alv output iam getting dump , only
    happening to my custom report.
    i have used the following code pleae correct me .
    This perform is used for Layout settings
      perform st_layout_build  using gs_layout.
    form st_layout_build  using  st_ls_layout type slis_layout_alv.
       st_ls_layout-no_input          = 'X'.
      st_ls_layout-colwidth_optimize = 'X'.
    st_ls_layout-zebra             = 'X'.
    st_ls_layout-detail_popup      = 'X'.
    endform.                    " st_layout_build
    Field Catalog details
    perform st_fieldcat_init changing gt_fieldcat.
    form st_fieldcat_init  changing  fp_i_fieldcat type slis_t_fieldcat_alv.
      clear ls_fieldcat.
      ls_fieldcat-col_pos      = 1.
      ls_fieldcat-fieldname    = 'ORGUNIT'.
      ls_fieldcat-seltext_l    = 'Orgunit'.
    ls_fieldcat-no_out       = 'X'.
      append ls_fieldcat to fp_i_fieldcat.
      clear ls_fieldcat.
      ls_fieldcat-col_pos      = 2.
      ls_fieldcat-fieldname    = 'ORGTEXT'.
      ls_fieldcat-seltext_l    = 'Orgdesc'.
    ls_fieldcat-no_out       = 'X'.
      append ls_fieldcat to fp_i_fieldcat.
      clear ls_fieldcat.
      ls_fieldcat-fieldname    = 'SALARY'.
      ls_fieldcat-seltext_l    = 'Salary'.
      ls_fieldcat-col_pos      = 3.
      ls_fieldcat-outputlen   = 15.
      ls_fieldcat-do_sum       = 'X'.
      ls_fieldcat-datatype     = 'CURR'.    "CURR
      append ls_fieldcat to fp_i_fieldcat.
    endform.
    Variant
      perform st_variant_init  using gs_variant g_repid.
    form st_variant_init   using  st_gs_variant type disvariant
                                 st_repid      like sy-repid.
      clear st_gs_variant.
      st_gs_variant-report = st_repid.
    endform.                    " st_variant_init
      g_repid = sy-repid.
      perform st_comment_build  using gt_list_top_of_page[].
    form st_comment_build  using   st_lt_top_of_page type slis_t_listheader.
      data: ls_line type slis_listheader.
    Listenüberschrift: Typ H
      clear ls_line.
      ls_line-typ  = 'H'.
    LS_LINE-KEY:  not used for this type
      ls_line-info = text-000.
      append ls_line to st_lt_top_of_page.
    endform.                    " st_comment_build
         call function 'REUSE_ALV_GRID_DISPLAY'
          exporting
             i_buffer_active        = 'X'
            i_callback_top_of_page = 'TOP_OF_PAGE'
            i_callback_program     = g_repid
            is_layout              = gs_layout
            it_fieldcat            = gt_fieldcat[]
           i_structure_name       = 'i_final'   "c_i_final "'objec'
           i_save                 = g_save
            is_variant             = gs_variant
          tables
            t_outtab               = fp_i_pyrol_final
          exceptions
            program_error          = 1
            others                 = 2.
        if sy-subrc ne 0.
          message e018. " Displaying the ALV GRID has failed
        endif.
    Please could any  one let me know why iam getting dump when iam clicking for total
    on my salary field.
    Regards
    latha

    Dear Chandu,
    my code iam giving in details
    types : begin of ty_output_data,
            staffno     type pernr_d,
            staffname   type emnam,
            grade       type stell,
            orgunit     type orgeh,
            orgtext     type hr_mcstext,
            psgroup     type trfgr,      " Pay Scale Group
            salary      type maxbt,       "PAD_AMT7S,
            rrefunded   type pad_amt7s,
            leavepay    type pad_amt7s,
            mshortfal   type pad_amt7s,   " Medical Shortfall
            echkshfal   type pad_amt7s,   " Execute checkup shortfall
            ofindeduc   type pad_amt7s,   " Other Finance Deduction
            mtyprem     type pad_amt7s,   " maternity premium
            vpbonus     type pad_amt7s,   " VP/Bonus
            gratuity    type pad_amt7s,   " Gratuity
            vpay        type pad_amt7s,   " Variable pay
            mallowance  type pad_amt7s,   " Meal Allowance
            overtime    type pad_amt7s,   " overtime
            other       type  pad_amt7s,  "  OTHER
            pfundeecon  type pad_amt7s,   " PFund Employee's Contribution
            banktrnsfer type pad_amt7s,   " Bank Transfer
            count       type i,
            end of ty_output_data.
    data : i_final         type standard table of ty_output_data.
    iam getting all my data in the internal table  I_FINAL.
    perform get_final_alv  using  i_final.
    form get_final_alv  using   fp_i_pyrol_final type ty_t_output_data.
    *local variable declarations
      data : l_v_idx      type sy-tabix.
    *local work areas
      data : l_wa_final type ty_output_data.
      g_save = 'A'.
    This perform is used for Layout settings
      perform st_layout_build  using gs_layout.
    Field Catalog details
      perform st_fieldcat_init changing gt_fieldcat.
    Variant
      perform st_variant_init  using gs_variant g_repid.
      g_repid = sy-repid.
      perform st_comment_build  using gt_list_top_of_page[].
      if not fp_i_pyrol_final is initial.
        delete adjacent duplicates from fp_i_pyrol_final comparing all fields.
        call function 'REUSE_ALV_GRID_DISPLAY'
          exporting
             i_buffer_active        = 'X'
            i_callback_top_of_page = 'TOP_OF_PAGE'
            i_callback_program     = g_repid
            is_layout              = gs_layout
            it_fieldcat            = gt_fieldcat[]
           i_structure_name       = 'i_final'   "c_i_final "'objec'
           i_save                 = g_save
            is_variant             = gs_variant
          tables
            t_outtab               = fp_i_pyrol_final
          exceptions
            program_error          = 1
            others                 = 2.
        if sy-subrc ne 0.
          message e018. " Displaying the ALV GRID has failed
        endif.
      endif.
    endform.                    " get_final_alv
    form st_layout_build  using  st_ls_layout type slis_layout_alv.
       st_ls_layout-no_input          = 'X'.
      st_ls_layout-colwidth_optimize = 'X'.
    st_ls_layout-zebra             = 'X'.
    st_ls_layout-detail_popup      = 'X'.
    endform.                    " st_layout_build
    form st_fieldcat_init  changing  fp_i_fieldcat type slis_t_fieldcat_alv.
      data: ls_fieldcat type slis_fieldcat_alv.
      clear ls_fieldcat.
      ls_fieldcat-col_pos      = 1.
      ls_fieldcat-fieldname    = 'ORGUNIT'.
      ls_fieldcat-seltext_l    = 'Orgunit'.
    ls_fieldcat-no_out       = 'X'.
      append ls_fieldcat to fp_i_fieldcat.
      clear ls_fieldcat.
      ls_fieldcat-col_pos      = 2.
      ls_fieldcat-fieldname    = 'ORGTEXT'.
      ls_fieldcat-seltext_l    = 'Orgdesc'.
    ls_fieldcat-no_out       = 'X'.
      append ls_fieldcat to fp_i_fieldcat.
      clear ls_fieldcat.
      ls_fieldcat-col_pos      = 5.
      ls_fieldcat-fieldname    = 'STAFFNAME'.
    ls_fieldcat-no_out       = 'X'.
      ls_fieldcat-seltext_l    = 'StaffName'.
      append ls_fieldcat to fp_i_fieldcat.
       clear ls_fieldcat.
      ls_fieldcat-col_pos      = 4.
      ls_fieldcat-fieldname    = 'STAFFNO'.
    ls_fieldcat-no_out       = 'X'.
      ls_fieldcat-seltext_l    = 'StaffNo.'.
      append ls_fieldcat to fp_i_fieldcat.
      clear ls_fieldcat.
      ls_fieldcat-col_pos      = 6.
      ls_fieldcat-fieldname    = 'GRADE'.
      ls_fieldcat-seltext_l    = 'Grade'.
      append ls_fieldcat to fp_i_fieldcat.
      clear ls_fieldcat.
      ls_fieldcat-col_pos      = 3.
      ls_fieldcat-fieldname    = 'COUNT'.
      ls_fieldcat-seltext_l    = 'Headcount'.
      append ls_fieldcat to fp_i_fieldcat.
    if the field name is 'Salary' then do a sum on this field.
    IF  fp_fname = c_betrg.
        l_wa_fieldcat-do_sum    = c_x.
    ENDIF.
    NOTE : IAM GETTING PROBLEM IN THE BELOW SALARY.
    IAM JUST CHECKING ITSELF NOT ALLOWING ME TO EXECUTE
      clear ls_fieldcat.
      ls_fieldcat-fieldname    = 'SALARY'.
      ls_fieldcat-seltext_l    = 'Salary'.
      ls_fieldcat-col_pos      = 7.
      ls_fieldcat-outputlen   = 20.
      ls_fieldcat-do_sum       = 'X'.
      ls_fieldcat-datatype     = 'CURR'.    "CURR
      append ls_fieldcat to fp_i_fieldcat.
      clear ls_fieldcat.
      ls_fieldcat-col_pos      = 9.
      ls_fieldcat-fieldname    = 'LEAVEPAY'.
      ls_fieldcat-seltext_l    = 'Leave Pay'.
      append ls_fieldcat to fp_i_fieldcat.
      clear ls_fieldcat.
      ls_fieldcat-col_pos      = 10.
      ls_fieldcat-fieldname    = 'MSHORTFAL'.
      ls_fieldcat-seltext_l    = 'Med.Sfall'.
      append ls_fieldcat to fp_i_fieldcat.
      clear ls_fieldcat.
      ls_fieldcat-col_pos      = 11.
      ls_fieldcat-fieldname    = 'ECHKSHFAL'.
      ls_fieldcat-seltext_l    = 'EX.Chckup.Sfall'.
      append ls_fieldcat to fp_i_fieldcat.
      clear ls_fieldcat.
      ls_fieldcat-col_pos      = 12.
      ls_fieldcat-fieldname    = 'OFINDEDUC'.
      ls_fieldcat-seltext_l    = 'Oth.Fin.Deduction'.
      append ls_fieldcat to fp_i_fieldcat.
      clear ls_fieldcat.
      ls_fieldcat-col_pos      = 13.
      ls_fieldcat-fieldname    = 'MTYPREM'.
      ls_fieldcat-seltext_l    = 'Mat.Premium'.
      append ls_fieldcat to fp_i_fieldcat.
      clear ls_fieldcat.
      ls_fieldcat-col_pos      = 14.
      ls_fieldcat-fieldname    = 'VPBONUS'.
      ls_fieldcat-seltext_l    = 'VP/Bonus'.
      append ls_fieldcat to fp_i_fieldcat.
      clear ls_fieldcat.
      ls_fieldcat-col_pos      = 15.
      ls_fieldcat-fieldname    = 'GRATUITY'.
      ls_fieldcat-seltext_l    = 'Gratuity'.
      append ls_fieldcat to fp_i_fieldcat.
      clear ls_fieldcat.
      ls_fieldcat-col_pos      = 16.
      ls_fieldcat-fieldname    = 'VPAY'.
      ls_fieldcat-seltext_l    = 'Variable Pay'.
      append ls_fieldcat to fp_i_fieldcat.
      clear ls_fieldcat.
      ls_fieldcat-col_pos      = 17.
      ls_fieldcat-fieldname    = 'MALLOWANCE'.
      ls_fieldcat-seltext_l    = 'Meal.Allowance'.
      append ls_fieldcat to fp_i_fieldcat.
      clear ls_fieldcat.
      ls_fieldcat-col_pos      = 18.
      ls_fieldcat-fieldname    = 'OVERTIME'.
      ls_fieldcat-seltext_l    = 'Overtime'.
      append ls_fieldcat to fp_i_fieldcat.
        clear ls_fieldcat.
      ls_fieldcat-col_pos      = 19.
      ls_fieldcat-fieldname    = 'OTHER'.
      ls_fieldcat-seltext_l    = 'Other'.
      append ls_fieldcat to fp_i_fieldcat.
    pfundeecon
      clear ls_fieldcat.
      ls_fieldcat-col_pos      = 20.
      ls_fieldcat-fieldname    = 'P FUND EMPLOYEES CONTRIBUTION'.
      ls_fieldcat-seltext_l    = 'P.Fund.Emp.Contrib'.
      append ls_fieldcat to fp_i_fieldcat.
      clear ls_fieldcat.
      ls_fieldcat-col_pos      = 21.
      ls_fieldcat-fieldname    = 'BANKTRNSFER'.
      ls_fieldcat-seltext_l    = 'Payment'.
      append ls_fieldcat to fp_i_fieldcat.
    endform.                    " st_fieldcat_init
    form st_variant_init   using  st_gs_variant type disvariant
                                 st_repid      like sy-repid.
      clear st_gs_variant.
      st_gs_variant-report = st_repid.
    endform.                    " st_variant_init
    form st_comment_build  using   st_lt_top_of_page type slis_t_listheader.
      data: ls_line type slis_listheader.
    Listenüberschrift: Typ H
      clear ls_line.
      ls_line-typ  = 'H'.
    LS_LINE-KEY:  not used for this type
      ls_line-info = text-000.
      append ls_line to st_lt_top_of_page.
    endform.                    " st_comment_build
          FORM TOP_OF_PAGE                                              *
    form top_of_page.
      data: l_i_detailheader type slis_t_listheader.
    To get the header for ALV
      perform detail_header changing l_i_detailheader.
      call function 'REUSE_ALV_COMMENTARY_WRITE'
        exporting
          it_list_commentary = l_i_detailheader.
    endform.                    "top_of_page
    form detail_header  changing fp_i_detailheader type slis_t_listheader.
      data: l_wa_header       type slis_listheader,
            l_v_time         type slis_edit_mask,
            l_v_date         type slis_edit_mask,
            l_v_abkrs        type char5,
            l_v_pabrj        type char8,
            l_v_pagno        type char10.
    Local Constants
      constants: l_c_h type char1 value 'H',
                 l_c_1  type i     value '1',
                 l_c_edit type char10 value '__.__.____',
                 l_c_slash  type c value '/'. " constant for slash
    To display the report Header
      l_wa_header-typ = l_c_h.
    WRITE sy-repid TO l_wa_header-info LEFT-JUSTIFIED.
      write text-014  to l_wa_header-info left-justified.
      append l_wa_header to fp_i_detailheader.
      clear l_wa_header.
    To display the Page no
      l_v_pagno =   sy-pagno + l_c_1.
      l_wa_header-typ = c_s.
      l_wa_header-key = text-008. " Page No:
      l_wa_header-info =  l_v_pagno.
      append l_wa_header to fp_i_detailheader.
      clear l_wa_header.
    To Display the User ID
      l_wa_header-typ = c_s.
      l_wa_header-key = text-009. " User ID
      l_wa_header-info = sy-uname.
      append l_wa_header to fp_i_detailheader.
      clear l_wa_header.
    To Display the Date/Time
      l_wa_header-typ = c_s.
      l_wa_header-key = text-010. " Date/Time:
      l_v_time = sy-uzeit.
      l_v_date = sy-datum.
      write: sy-uzeit to l_v_time.
      write sy-datum to l_v_date using edit mask l_c_edit.
      concatenate l_v_date
                  l_c_slash
                  l_v_time into l_wa_header-info+0(25) separated by space.
      append l_wa_header to fp_i_detailheader.
      clear: l_wa_header, l_v_date.
    To Display the Report Description
      l_wa_header-typ = c_s.
      l_wa_header-key = text-011.                " Report Description
      l_wa_header-info = text-012.
      append l_wa_header to fp_i_detailheader.
      clear l_wa_header.
      append l_wa_header to fp_i_detailheader.
    endform.                    " detail_header
    I will be greatful if any one can please help me in removing me the dump.
    REGARDS
    LATHA.

  • XML not displaying in Safari when using a XSL.

    Hi, has anyone encountered this issue where Safari, and all Mac browsers for that matter, don't display XML when using an XSL? When I use a XML file with an XSL stylesheet I get a "Document is Empty" error. It displays correctly when a CSS is used and also works just fine on a PC.

    My goof.  In the Safari preferences area I turned on Developer mode out of curiosity and then by accident turned off pictures.  All is well now.

  • Displays switch around when using dual view on Satellite P100

    I have a Satellite P100-434 (PSPADE). I am trying to use the laptop as the primary display and an LCD screen as a secondary monitor. I have found that no matter how I configure this, using either the Vista display properties or through the Nvidea control panel I am getting a problem where the monitors periodically swap over.
    I am not bothered which device is the primary but getting the system to make it's mind up would be really usefull.
    This seems to happen when I am typing, making me wonder if there is a keypress that I am inadvertantly triggering which is causing this to happen. Ideas anyone?

    Hi,
    you should do the following things:
    - update your bios to the latest available version
    - update your display drivers and any other remaining drivers in your system to the latest available version
    - maybe, if the driver updates dont really help you out, recover your machine with the recovery media and check if the error re-appears.
    IF all these steps didnt worked for you, then come back and we will discuss it further. :)
    Greets

  • Display Item cleared when using 'Enter-Query'

    Hi all,
    i am going to develop a multilanguage application with very
    special heading texts using display items for these headings.
    BUT- if I press EnterQuery, they are cleared also.
    How can I restrict cleanup of these display items used as
    headings ?
    I was looking in the properties, but no idea.
    Thanks for help,
    udo

    I'm showing how to do it when switching modes. I'm
    not suggesting this is the best way to do a query.We need to look at this in the context of the original probelm in the thread linked to above. For most cases the when-timer-expired etc is just a huge detour around using the pre-query trigger but it's an interesting approach to the specific problem in the earlier thread. The OP there wanted to be able to type '>5000' into a number field in a non-database block, which we can do in a database block in enter-query mode, and use it as a query parameter in the database block. Perhaps if we enter this into a character field in the non-database block and populate the numeric field in the database block whilst in enter-query mode then we can do searches on ranges of data? Unfortunately it doesn't work - you get an ora-06502 error just like you do when using the pre-query trigger. For the situation in the original thread you would have to use a 'default where'.

  • MBP with retina display always crash when using Final cut pro x and iMovie. Plz l need help

    HI, My MBP with retina display always crash when l am using Final cut pro x and iMovie and come up with gray screen. Plz l need help

    Take it back and get a refund. What are you waiting for, your new Mac does not work correctly.

  • Dim display apert from when using FW target disck mode

    This is strange.
    iBook g4 1.2 Ghz. On startup the screen is completly dark. You can just about see that it is displaying something but no real image. So far so failed backlight but...
    If I start the machine up in target disk mode, I get an image. Not quite as bright as normal but around 50% of normal brightness. As the machine starts the screen flicks onto full brightness for a second before reverting to 50%.
    I've just finished putting a new 160GB drive in the machine and it's doing this after a clean install of Leopard onto the new drive.
    As said I'd normally guess a failed back light but for the fact that I can get an image using FW TD and it can't be software since it's a brand new drive and OS.
    Works fine when connected to an external monitor too.
    Any ideas?

    Hey Andrew,
    Try resetting PMU first, it's responsible for the backlight:
    http://support.apple.com/kb/HT1431
    Theoretically you could have a GPU problem if that doesn't work.
    Richard

  • Display "blank-out" when using Maya with a GF 7800?

    I have a problem where my LCD display occasionally blinks off for about 5-10 seconds when using Maya with a scene displaying about 100,000 polys. Has anyone else encountered this? This only seems to happen when I am quickly rotating the camera in a grey shaded perspective panel?
    My LCD is a Dell 20" LCD (set at 1600x1200) connected to a Geforce 7800 in a Quad G5 with 4.5GB of ram.
    I have never seen this issue before in Maya (I have been using Maya for years, on other machines), so I suspect it is hardware or driver related?

    OK, have completed several tests. I definately seems that the my Geforce 7800 has problems when running some applications. I wonder if anyone else has encountered this problem?
    The easiest way to cause the display to momentarily shut off is to use Maya in the full screen perspective camera window in shaded mode. Proceed to rapidly move a 20,000 poly model (or greater) both zooming and rotating (the polys need to fill the entire screen and shake the mouse).My display (Dell 20" 2001fp) will blink-off for a few seconds. Of course, this in not "normal" work flow, but I have this issue happening when working normally, it can sometimes take time to occur.
    I have tried the Geforce 6600 (256mb ver) and this does not occur with that video card. I have tried several mice both wired and wireless, plus changed the Energy Saver options for Processor performance (from comments I read on Macintouch.com). The problem is consistent to my Geforce 7800. This problem will also occur in Photoshop CS, by moving images and resizing, but I found it much harder to induce.

Maybe you are looking for