Display going off on linux terminals and session ends when kept ideal

Hi,
When I have logged onto linux server using tarantella.If the terminal is inactive for some time it is terminating my session automatically and i have all of my terminals as blank. I do not get any display in terminals opened. Could you please help me with this.
The following error message i am getting:
"Connection to Secure Global Desktop server has been terminated"
Thank you
Sudhir

What I found out is, when a proxy Service is between client and SGD I had to reduce the keep alives to 30s.
tarantella config edit --sessions-aipkeepalive 30
/opt/tarantella/var/docroot/resources/login/sco/tta/boot # grep AsadKeepAlive *
autostrap.html: <param name=\"AsadKeepAlive\" value=\"30\">
strap.html: <param name=\"AsadKeepAlive\" value=\"30\">

Similar Messages

Display goes off and comes back only when Satellite A210 is restarted

Hi,
Satellite A210 displays goes off now and then and comes back only when the machine is restarted.
Usual runtime runtime 30 or 45 mins
Please advice
# Is this a hardware problem or software?
# Does some one else faced same problem do advice?
Machine is year and a half old runs windows vista basic that comes with it.
I have reinstalled the display adapter drivers also the problem remains same

Hello
Have you tested an external monitor on the notebook?
If the external monitor works fine it seems to be an internal display issue and must be replaced.
Are you running the factory settings on your notebook or have you installed your own Windows version? Before you go to an authorized service provider you should restore the factory settings to determine if its a hardware or software problem. With the factory settings all should work properly and if not in my opinion its a hardware problem.
Check this!!!

Sattelite 1800-752S - the display goes off

Hi everybody.
I have a satellite 1800-752S.
SInce a ew months ithas a wierd problem: the display goes off. If i press and quickly release the lid button it comes back on, but after that goes off again. SOmetimes ot goes off immediately, sometimes after a few minutes, or even hours. SOmetimes it keeps being on when I am running from battery, and annoys me on AC, sometimes the versus. It works quite well, after I turn it to standby or hibernate a few times, and after a restart it annoys me.I have updated its BIOS to the lates from this site, that wouldn't help. I assume it is a hardware problem, because it is the same problem under Linux, and I have tried to install different verisons of drivers and Windows (not only the one from the Recovery CD). Did anyone have the same problem before. Any help will be appreciated.
Thanks a lot
Roman

Hi,
I think you are right, it's a hardware problem. But to be sure, try to connect an external monitor. If it works without problems while the notebooks display goes off, then it must be a hardware fault.
I assume it's a problem with the FL-inverter. You have to give your mashine to a Toshiba service partner for repair.
Bye

My display goes off when Battery being charged on Acer E5-511 after upgrading to Windows 10

I upgraded my window 8.1 to Window 10 on Acer E5-511 machine yesterday. I notice that when I switch on power to charge its battery, a beep sounds and display goes off. when power is again switched off the display comes back with a beep again. However, when the machine battery is allowed to charge for some time, either it goes to hibernation mode or stops working since display does not come back even after switching off the power supply. This peculiar problem did not existed when I had used this Notebook with windows 8.1 for past eight months. Can any one help me to solve this problem as i am being forced to charge the battery only when Notebook is not powered on.

A BIOS update fixed Grey Bat's (a.k.a. Myotis grisescens) problem. http://community.acer.com/t5/Windows-10/Restart-problems-with-Acer-E5-511-P8C8-laptop/m-p/370322#M24 http://us.acer.com/ac/en/US/content/drivers Edit: Acer also said that "Your system may require additional software, firmware, and/or a BIOS update to install and run Windows 10." http://us.acer.com/ac/en/US/content/windows10-eligible-models

Satellite A200 - Display goes off for no reason

I've a Satellite A200-E530D running Windows Vista Home Premium. For the past month, i've had something strange happening to my computer, soon after boot up, the display goes off. for no good reason! the only option i have is to hard boot the system and everythings fine...though a couple of times after restarting it again went off.
I've tried updating to the latest display drivers (I have a Nvidia Geforce 7300 Go graphics with a 128 MB of VRAM)
Another strange thing, Vista SP1 doesn't install on my machine. tried uninstalling my Anti virus, but that hasnt helped either.
Can anybody shed some light on my dark display?

im hoping its not a failing inverter board. hardware support where i come from (India) costs a bomb, and for a laptop, its a hell of a lot more than a bomb.
i dont think its a failing inverter board though...shouldnt the board fail regularly while im using it then? the fact that my display switches off (and dude, it switches OFF completely, no backlight at all. my laptop responds only to a hard boot in the @$$) right after i switch on my computer points to a software malfunction. because, afterwards, my PC works just fine for the the next seven or eight hours that i use it for.
im guessing there something wrong with the way the drivers are loading up...or something.
maybe i should change the power options? i've configured the screen to switch off after a period of 1 min of no activity. and my laptops start up time (from the time i log in, to the time the little windows hourglass sign disappears) can be a little longer than a minute. is it possible that theres something wrong going on there?
like i said, im at my wits' end!

Display going off

My display goes off after starting the pc, sometimes after 5 mins and sometimes at the BIOS setup, and even during Windows startup repair. RAM and PSU are fine as I am using them on a different motherboard and they are working fine. Also when the display goes off, sound doesn't go off immediately, I can hear background music and then there is some noise and sound also goes off, HDD led stops blinking afterwards. Sometimes, HDD goes off along with display. So is the culprit graphics card or motherboard or something else( The other motherboard which I tried, (Nvidia 630i) had onboard VGA and it worked fine)
My specifications:
Motherboard: MSI P45 Neo-F (601-7519-010) no OC
RAM: 2X2GB Corsair DDR2
HDD: WD Caviar Green WS6400AACS, 640GB
PSU: Corsair VX450, 450W
GFX Card: ATI Radeon 4850, 512MB DDR3
Operating System: Windows 7
Processor: Intel E6750, 2.66Ghz

It is highly recommended to use identical modules. Using non-identical but similar modules either works properly or it doesn't. The answer depends highly on what specific memory combination is going to be used on what system. So, basically, if you can avoid mixed configurations, avoid them. If you already have the modules there in front of you, go ahead and simply test it. There is no risk of damaging anthing (well, at least not in general).
Quote
but since pc is booting properly, motherboard should be fine right?
Probably --> which means that I personally believe that a problem with the video card is more likely to be the cause. That is why it makes a lot of sense to start testing on that front first. However, the mainboard is not necessarely out of the equation. It is not very likely, but still not totally impossible that the mainboard is the cause for your problem.

How do I remove an alert for a calendar item that has long since been deleted? and yet goes off mysteriously, un-deletably, and un-editably every single ****** week !!

How do I remove an alert for a calendar item that has long since been deleted? and yet goes off mysteriously, un-deletably, and un-editably every single ****** week !!

I have the same problem with my iPhone. I set up a recurring calendar event for every Thursday. That event is no longer happening during the summer, so I went in and chose one from the current month and selected Delete. Then it gve me two choices, one of which was to Delete All Future Events of this one, and that's what I chose. I figured, this way, I'll still be able to see the ones from the past, but won't have to see (or hear the alert) for the future ones.
The following week, my phone alerted me to the appointment, and even showed it on the initial screen, even though it wasn't in the calendar. I went in to the calendar and NOTHING was scheduled for that day. So why is this happening?
So I set up a new recurring event, for in the past, then went in and deleted all furture occurances, and it did the same thing... still alerted to an event that was no longer in the calendar.
I hope somebody else has found a fix, or at least a reason for why this is happening.

My phone displays "Network search". Current time and date. When the SIM is inserted and when there is no sim

My phone displays "Network search". Current time and date. When the SIM is inserted and when there is no sim.

Hi, AlexKot.
Thank you for visiting Apple Support Communities.
It sounds like you are experiencing an issue with your iPhone searching for service. If you have not resolved this issue, I would recommend trying the troubleshooting steps in the article below.
If you see No Service or Searching in the status bar of your iPhone or iPad
http://support.apple.com/kb/ts4429
Cheers,
Jason H.

My phone displays "Network search". Current time and date. When sim sim svtavlena and when there is no

My phone displays "Network search". Current time and date. When sim sim svtavlena and when there is no.
Мой айффон постоянно пишет поиск сети, даже если достать сим карту. Дата и время тоят правильно, сброс сети я пробовал, не помогает.

Hi, AlexKot.
Thank you for visiting Apple Support Communities.
It sounds like you are experiencing an issue with your iPhone searching for service. If you have not resolved this issue, I would recommend trying the troubleshooting steps in the article below.
If you see No Service or Searching in the status bar of your iPhone or iPad
http://support.apple.com/kb/ts4429
Cheers,
Jason H.

My alarm goes off one hour early and this is a nuisance. How can I solve it

Every morning I wake up an hour early because my iphone 3GS alarm goes off an hour early. Please tell me how to sort this out.
Thanks

Welcome to Apple Support Communities.
To cause Mail to display outgoing attachments as icons instead of in-line, you can open Terminal.app and insert this command:
defaults write com.apple.mail DisableInlineAttachmentViewing 1
To enable in-line attachments again once disabled (so attachments again appear as documents displayed in-line, not icons):
defaults write com.apple.mail DisableInlineAttachmentViewing 0

T43P display goes off

The computer has been great, no problems, until a few weeks ago I was using it for GPS duty while driving. Suddenly the display went off, rebooting would bring it back for a few seconds but would shut off. I let it rest overnight and has been fine for two weeks. Today it shut off again. My external larger flat panel still works, but the computer's display is off. Any common failures, where to start looking, etc? Thanks for any advice...
Karl

What he was referring to is GPU, the graphic card, and that's why I asked you to run PC-Doctor and see what shape the video adapter (another way of saying GPU) is...
This is a known problem on T4x and R5x ThinkPads with ATi GPU, although T43/p had better soldering techniques applied and is generally less prone to this failure, but it does happen on occassion.
Assuming that this indeed is the problem, if your machine is out of warranty, your choices are re-balling/re-flowing the solder in the GPU area, or motherboard replacement. I can direct you to a place that does this type of work (re-balling) for me, and they provide warranty on their repairs, I have been nothing but pleased so far, PM me if you need to.
Good luck.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Display goes off when close lid and open it again [Lenovo G580]

Hi everybody,
I have a problem due a new update, when I close laptop lid and open it again, there's nothing on screen (like power off laptop) and webcam's light is on! when turning on my laptop it would be on for a second, but it freeze on this state, I think the problem is with kernel but i'm not sure cause i've updated everything.
And this problem occur in both X and other tty.
I'm not sure it should belong here or I should move it Hardware/Kernel section.
Kernel: Linux GNU 3.14.0-4-ARCH
Xorg-server: 1.15.0-5
Nvidia: 334.21-4
everything is updated.

MadTux wrote:Did you notice anything related to the problem in the systemd log or in /var/log/pm-suspend.log?
oh, "pm-suspend" make the log file:
/usr/lib/pm-utils/sleep.d/00logging suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave suspend suspend:
/usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01grub suspend suspend:
/usr/lib/pm-utils/sleep.d/01grub suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend:
/usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/75modules suspend suspend:
Unloading kernel module uhci_hd...Done.
Unloading kernel module button...modprobe: FATAL: Module i915 is in use.
/usr/lib/pm-utils/functions: line 89: log: command not found
Failed.
Unloading kernel module ehci_hd...Done.
Unloading kernel module wl...Done.
/usr/lib/pm-utils/sleep.d/75modules suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/90clock suspend suspend:
/usr/lib/pm-utils/sleep.d/90clock suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend:
/usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95led suspend suspend:
/usr/lib/pm-utils/sleep.d/95led suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend:
Kernel modesetting video driver detected, not using quirks.
/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/99video suspend suspend:
kernel.acpi_video_flags = 0
/usr/lib/pm-utils/sleep.d/99video suspend suspend: success.
Sun Apr 13 01:00:01 IRDT 2014: performing suspend
that "FATAL: Module i915 is in use." seems suspicious, but i have no idea how to trace it down and solve it.
Last edited by Bersam (2014-04-12 20:38:55)

Display goes off in car

I have recently changed my phone from a 6230i to a 6680. I have a CK-7W kit so I changed the cradle to suit. My problem is, on the old phone when in the car kit the display stayed on all the time (it did not need to power save as it was connected to the car). On the new phone the screen darkens after a time and then goes into screen saver no matter what I seem to try. The car symblom shows on the screen and all functions seem to work fine, but I would like the screen to stay on. Can anyone help?
Regards Old Sparkie.

There are many models of Nokia phones that I got hold to, & I experienced that some, the screen savers are still active even if on charger & no way one can disable it, only change the time to max of 60secs. Putting a phone on cradle is like putting it in charger.
The only solution( I stand to be corrected) is a third party software, to have it always on.
Knowledge not shared is knowledge wasted!
If you find it helpfull, it's not hard to click the STAR..

Cinema display goes off when USB cable plugged in

WhenI plug my USB/firewire cable into the computer the screen goes black.
I have used this display for years and never had any problems.
The computer is about a year old but both have worked together since they first met!
Any ideas?
I see similar questions online but no reponse from Apple??!!??

What kind of computer is it connected to? Is there anything else connectted to usb? If so try disconnecting them.
Try smc reset.

TS3406 My apple icon keeps coming on and going off. Can call and talk only with speaker. Can't get phone to shut down

Trouble with phone today. Can't power off. Can call but I can't hear caller unless I put on speaker. Apple icon keepd going on and off.

Trouble with phone today. Can't power off. Can call but I can't hear caller unless I put on speaker. Apple icon keepd going on and off.

Display going off on linux terminals and session ends when kept ideal

Similar Messages

Maybe you are looking for