Display Hierarchy according to levels

Hi All,
I have Hierarchy which is of five levels. At each level their respective description is also there. When i uploaded it in data manager, It is uploaded correctly according to five levels. But at each levels, all the level descriptions are displayed, because the five descriptions are displayed fields in the Hirarchy Table. I want that each level must have its own description.
When i changed the source file accordingly, Their respective levels description are displayed but with four other blank with comma seperated.
How can i diplay level wise description with commas and blank values,
Thanks and Regards,
Devinderpal

hi Shilpi ,
I hope data is not getting displayed is that right ?
wdContext.nodeKey().invalidate(); 
  wdContext.nodeManhour().invalidate();
  wdContext.nodeIncidence().invalidate();
  wdContext.nodeLost_time().invalidate();
  wdContext.nodeLegal().invalidate();
  wdContext.nodeTrainings().invalidate();
  wdContext.nodeInspection().invalidate();
  wdContext.nodeOccupation().invalidate();
  wdContext.nodeEmergency().invalidate();
  wdContext.nodeEnvironment().invalidate();
  wdContext.nodeContract().invalidate();
  IPrivateZcumulative_displayView.IKeyElement key = wdContext.currentKeyElement();
  IPrivateZcumulative_displayView.IManhourElement man = wdContext.currentManhourElement();
  IPrivateZcumulative_displayView.IIncidenceElement inc = wdContext.currentIncidenceElement();
  IPrivateZcumulative_displayView.ILost_timeElement los = wdContext.currentLost_timeElement();
  IPrivateZcumulative_displayView.ILegalElement leg = wdContext.currentLegalElement();
  IPrivateZcumulative_displayView.ITrainingsElement tra = wdContext.currentTrainingsElement();
here you are taking currentelement , is the nodeKey() ,nodeManHour() cardinality is 1...1 or 0...n ?
if it is 1...1 , then try to print the values you are getting from the resultset  so you will come toknow if it is coming from back end or not .
if it is 0..n then you have to create an element i.e wdContext.createKeyElement() etc and then after setting the values add this element to corresponding node.
Regards
Govardan

Similar Messages

  • How to display a Hierarchy node for level 2 without parent and description

    Hi,
    How to display a node at level two at the query the first node is CLASS where hierarchy is maintained and the second node is
    subclass where hierarchy is not maintained, Now I want to display the subclass in the row where it has to display its child node in one column & text in the other.

    Hi,
    I dont think this would be feasible to display in different columns.
    -Vikram

  • CS4 NOT capable of sharp displays at all zoom levels

    I must have been asleep, until now, and missed the significance and importance of what follows.
    In post #11 here:
    http://forums.adobe.com/thread/375478?tstart=30
    on 19 March 2009 Chris Cox (Adobe Photoshop Engineer - his title on the old forums) said this, in a discussion regarding sharpness in CS4:
    "You can't have perfectly sharp images at all zoom levels.". Unfortunately, my experience with CS4 since its release late last year has repeatedly confirmed the correctness of this statement.
    What makes this statement so disturbing is that it contradicts an overwhelming amount of the pre- and post-release promotional advertising of CS4 by Adobe, to the effect that the OpenGL features of CS4 enable it to display sharp images at all zoom levels and magnifications. What is surprising is that this assertion has been picked up and regurgitated in commentary by other, sometimes highly experienced, Ps users (some unconnected with, but also some directly connected with, Adobe). I relied upon these representations when making my decision to purchase the upgrade from CS3 to CS4. In fact, they were my principal reason for upgrading. Without them, I would not have upgraded. Set out in numbered paragraphs 1 to 6 below is a small selection only of this material.  
    1. Watch the video "Photoshop CS4: Buy or Die" by Deke McClelland (inducted into the Photoshop Hall of Fame, according to his bio) on the new features of CS4 in a pre-release commentary to be found here:
    http://fyi.oreilly.com/2008/09/new-dekepod-deke-mcclelland-on.html
    Notice what he says about zooming with Open GL: "every zoom level is a bicubically rendered thing of beauty". That, when viewed with the zooming demonstrated, can only be meant to convey that your image will be "sharp" at all zoom levels. I'm sure he believes it too - Deke is someone who is noted for his outspoken criticism of Photoshop when he believes it to be deserved. It would seem that he must not have experimented and tested to the extent that others posting in this forum have done so.
    2. Here's another Adobe TV video from Deke McClelland:
    http://tv.adobe.com/#vi+f1584v1021
    In this video Deke discusses the "super smooth" and "very smooth" zooming of CS4 at all zoom levels achieved through the use of OpenGL. From the context of his comments about zooming to odd zoom levels like 33.33% and 52.37%, it is beyond doubt that Deke's use of the word "smooth" is intended to convey "sharp". At the conclusion of his discussion on this topic he says that, as a result of CS4's "smooth and accurate" as distinct from "choppy" (quoted words are his) rendering of images at odd zoom levels (example given in this instance was 46.67%), "I can actually soft proof sharpening as it will render for my output device".
    3. In an article by Philip Andrews at photoshopsupport.com entitled 'What's New In Adobe Photoshop CS4 - Photoshop 11 - An overview of all the new features in Adobe Photoshop CS4',
    see: http://www.photoshopsupport.com/photoshop-cs4/what-is-new-in-photoshop-cs4.html
    under the heading 'GPU powered display', this text appears :
    "Smooth Accurate Pan and Zoom functions – Unlike previous versions where certain magnification values produced less than optimal previews on screen, CS4 always presents your image crisply and accurately. Yes, this is irrespective of zoom and rotation settings and available right up to pixel level (3200%)." Now, it would be a brave soul indeed who might try to argue that "crisply and accurately" means anything other than "sharply", and certainly, not even by the wildest stretch of the imagination, could it be taken to mean "slightly blurry but smooth" - to use the further words of Chris Cox also contained in his post #11 mentioned in the initial link at the beginning of this post.
    4. PhotoshopCAFE has several videos on the new features of CS4. One by Chris Smith here:
    http://www.photoshopcafe.com/cs4/vid/CS4Video.htm
    is entitled 'GPU Viewing Options". In it, Chris says, whilst demonstrating zooming an image of a guitar: "as I zoom out or as I zoom in, notice that it looks sharp at any resolution. It used to be in Photoshop we had to be at 25, 50 , 75 (he's wrong about 75) % to get the nice sharp preview but now it shows in every magnification".
    5. Here's another statement about the sharpness of CS4 at odd zoom levels like 33.33%, but inferentially at all zoom levels. It occurs in an Adobe TV video (under the heading 'GPU Accererated Features', starting at 2 min 30 secs into the video) and is made by no less than Bryan O'Neil Hughes, Product Manager on the Photoshop team, found here:
    http://tv.adobe.com/#vi+f1556v1686
    After demonstrating zooming in and out of a bunch of documents on a desk, commenting about the type in the documents which is readily visible, he says : "everything is nice and clean and sharp".
    6. Finally, consider the Ps CS4 pdf Help file itself (both the original released with 11.0 and the revised edition dated 30 March 2009 following upon the release of the 11.0.1 update). Under the heading 'Smoother panning and zooming' on page 5, it has this to say: "Gracefully navigate to any area of an image with smoother panning and zooming. Maintain clarity as you zoom to invididual pixels, and easily edit at the highest magnification with the new Pixel Grid." The use of the word "clarity" can only mean "sharpness" in this context. Additionally, the link towards the top of page 28 of the Help file (topic of Rotate View Tool) takes you to yet another video by Deke McClelland. Remember, this is Adobe itself telling you to watch this video. 5 minutes and 40 seconds into the video he says: "Every single zoom level is fluid and smooth, meaning that Photoshop displays all pixels properly in all views which ensures more accurate still, video and 3D images as well as better painting, text and shapes.". Not much doubt that he is here talking about sharpness.
    So, as you may have concluded, I'm pretty upset about this situation. I have participated in another forum (which raised the lack of sharp rendering by CS4 on several occasions) trying to work with Adobe to overcome what I initially thought may have been only a problem with my aging (but nevertheless, just-complying) system or outdated drivers. But that exercise did not result in any sharpness issue fix, nor was one incorporated in the 11.0.1 update to CS4. And in this forum, I now read that quite a few, perhaps even many, others, with systems whose specifications not only match but well and truly exceed the minimum system requirements for OpenGL compliance with CS4, also continue to experience sharpness problems. It's no surprise, of course, given the admission we now have from Chris Cox. It seems that CS4 is incapable of producing the sharp displays at all zoom levels it was alleged to achieve. Furthermore, it is now abundently clear that, with respect to the issue of sharpness, it is irrelevant whether or not your system meets the advertised minimum OpenGL specifications required for CS4, because the OpenGl features of CS4 simply cannot produce the goods. What makes this state of affairs even more galling is that, unlike CS3 and earlier releases of Photoshop, CS4 with OpenGL activated does not even always produce sharp displays at 12.5, 25, and 50% magnifications (as one example only, see posts #4 and #13 in the initial link at the beginning of this post). It is no answer to say, and it is ridiculous to suggest (as some have done in this forum), that one should turn off OpenGL if one wishes to emulate the sharp display of images formerly available.

    Thanks, Andrew, for bringing this up.  I have seen comments and questions in different forums from several CS4 users who have had doubts about the new OpenGL display functionality and how it affects apparent sharpness at different zoom levels.  I think part of the interest/doubt has been created by the over-the-top hype that has been associated with the feature as you documented very well.
    I have been curious about it myself and honestly I didn't notice it at first but then as I read people's comments I looked a little closer and there is indeed a difference at different zoom levels.  After studying the situation a bit, here are some preliminary conclusions (and I look forward to comments and corrections):
    The "old", non-OpenGL way of display was using nearest-neighbor interpolation.
    I am using observation to come to this conclusion, using comparison of images down-sampled with nearest-neighbor and comparing them to what I see in PS with OpenGL turned off.  They look similar, if not the same.
    The "new", OpenGL way of display is using bilinear interpolation.
    I am using observation as well as some inference: The PS OpenGL preferences have an option to "force" bilinear interpolation because some graphics cards need to be told to force the use of shaders to perform the required interpolation.  This infers that the interpolation is bilinear.
    Nothing is truly "accurate" at less than 100%, regardless of the interpolation used.
    Thomas Knoll, Jeff Schewe, and others have been telling us that for a long time, particularly as a reason for not showing sharpening at less than 100% in ACR (We still want it though ).  It is just the nature of the beast of re-sampling an image from discrete pixels to discrete pixels.
    The "rule of thumb" commonly used for the "old", non-OpenGL display method to use 25%, 50%, etc. for "accurate" display was not really accurate.
    Those zoom percentages just turned out to be less bad than some of the other percentages and provided a way to achieve a sort of standard for comparing things.  Example: "If my output sharpening looks like "this" at 50% then it will look close to "that" in the actual print.
    The "new", OpenGL interpolation is certainly different and arguably better than the old interpolation method.
    This is mainly because the more sophisticated interpolation prevents drop-outs that occurred from the old nearest-neighbor approach (see my grid samples below).  With nearest-neighbor, certain details that fall into "bad" areas of the interpolated image will be eliminated.  With bilinear, those details will still be visible but with less sharpness than other details.  Accuracy with both the nearest-neighbor and bilinear interpolations will vary with zoom percentage and where the detail falls within the image.
    Since the OpenGL interpolation is different, users may need to develop new "rules of thumb" for zoom percentages they prefer when making certain judgements about an image (sharpening, for example).
    Note that anything below 100% is still not "accurate", just as it was not "accurate" before.
    As Andrew pointed out, the hype around the new OpenGL bilinear interpolation went a little overboard in a few cases and has probably led to some incorrect expectations from users.
    The reason that some users seem to notice the sharpness differences with different zooms using OpenGL and some do not (or are not bothered by it) I believe is related to the different ways that users are accustomed to using Photoshop and the resolution/size of their monitors.
    Those people who regularly work with images with fine details (pine tree needles, for example) and/or fine/extreme levels of sharpening are going to see the differences more than people who don't.  To some extent, I see this similar to people who battle with moire: they are going to have this problem more frequently if they regularly shoot screen doors and people in fine-lined shirts.   Resolution of the monitor used may also be a factor.  The size of the monitor in itself is not a factor directly but it may influence how the user uses the zoom and that may in turn have an impact on whether they notice the difference in sharpness or not.  CRT vs LCD may also play a role in noticeability.
    The notion that the new OpenGL/bilinear interpolation is sharp except at integer zoom percentages is incorrect.
    I mention this because I have seen at last one thread implying this and an Adobe employee participated who seemed to back it up.  I do not believe this is correct.  There are some integer zoom percentages that will appear less sharp than others.  It doesn't have anything to do with integers - it has to do with the interaction of the interpolation, the size of the detail, and how that detail falls into the new, interpolated pixel grid.
    Overall conclusion:
    The bilinear interpolation used in the new OpenGL display is better than the old, non-OpenGL nearest-neighbor method but it is not perfect.  I suspect actually, that there is no "perfect" way of "accurately" producing discrete pixels at less than 100%.  It is just a matter of using more sophisticated interpolation techniques as computer processing power allows and adapting higher-resolution displays as that technology allows.  When I think about it, that appears to be just what Adobe is doing.
    Some sample comparisons:
    I am attaching some sample comparisons of nearest-neighbor and bilinear interpolation.  One is of a simple grid made up of 1 pixel wide lines.  The other is of an image of a squirrel.  You might find them interesting.  In particular, check out the following:
    Make sure you are viewing the Jpegs at 100%, otherwise you are applying interpolation onto interpolation.
    Notice how in the grid, a 50% down-sample using nearest-neighbor produces no grid at all!
    Notice how the 66.67% drops out some lines altogether in the nearest-neighbor version and these same lines appear less sharp than others in the bilinear version.
    Notice how nearest-neighbor favors sharp edges.  It isn't accurate but it's sharp.
    On the squirrel image, note how the image is generally more consistent between zooms for the bilinear versions.  There are differences in sharpness though at different zoom percentages for bilinear, though.  I just didn't include enough samples to show that clearly here.  You can see this yourself by comparing results of zooms a few percentages apart.
    Well, I hope that was somewhat helpful.  Comments and corrections are welcomed.

  • Urgent Error in Displaying Hierarchy in Bex- like not assigned Material

    Hi Gurus,
    plz  solve my problem like displaying Hierarchy in Bex ,
    I loaded hierarchy from R/3 system into Bw 0Mterial.
    In Bex 0material Properties I Selected heirachy on Material , this heirarchy having 8 levels,
    but in the out put it showing only one level displayng
    like Not Assigned Material.
    i did all the bex setting well, but i dnot know why i am getting this ...
    plz any one help..
    Thanks in advance
    Anil

    hi,
    Is your heirarchy uploaded properly for 0Material ?? If yes juct check out if your transcational data is in sync with the hierarchy master ? If it is not then it wuill display as Not Assigned..
    Regards,

  • Can we achieve a functionality to display content according to customizable

    Hi,
    I am new to UCM and have following queries . I tried searching on net but didnt get specific answers. Please guide me if possible?
    1. Does UCM support streaming content. i.e. multimedia combination of video, sound and accompanying slides. And i need to know if it supports SMIL format files (Synchronized Multimedia Integration Language ). Do we need to buy any component for that or it is supported by default.
    2. Can we achieve a functionality to display content according to customizable rules. For example to display a
    list of pages in the "ABC" branch modified within the last 12 days?
    3.Can we provide search/replace property in the WYSWYG editor, I didnt find the same there? Is there any ootb for that?
    4.Can we have Distributed content authoring, in order to have multiple content owners working on the same set of pages?
    5.Can UCM automatically generate a site map. Optionally certain pages should be able to be excluded from the map manually?
    6. Can we create and manage micro sites (or country versions of specific branches) ?
    Ideally content can be in the form of symbolic links - meaning unless the microsite "overwrites" content it takes content maintained in a global site.
    7. Does UCM have capability to do page assembly (reusable components)? ie. Could it be possible to create components that can be selected by users and inserted into content for standard functionalities, e.g., video players, registration forms, zoom tools?
    8. Does UCM have ability to upload multiple attachments/images at once?
    9. Can we hide an existing content without deleting it and later showing it again?
    10. Can we publish content directly to intranet, mobile format, e-Mail or need we to write any custom component for that?
    11. Can we publish multiple content types at once?
    12. Can web images (PNG, GIF, JPG) be easily managed by users with an interface that allows browsing by thumbnail, not just file name?
    Thanks a lot in advance.

    1. The Weblayout editor applet can be used to create virtual folders (not related to the Folders component) which are simply queries based on any metadata you like. So users can click on Browse Content/library folders to get to that section of the GUI then they will be presented with a base Page (think of it as a little UCM contained website) with links to reports, queries, and other pages even outside links like to Google. The number of pages you can create is not limited so you could create a large hierarchy of pages for reports and lists and search results. You can also secure sections of this internal website by security groups to keep some people from seeing those links on the pages (they simply do not show for you unless you have access to the group).
    So all out of the box, and all based on metadata including security. This is the very oldest version of Folders and unlike the folders_g component is not limited in number of folders or items per folder and does not change system performance like Folders_g.
    They are not truly folders and do not exist for external WebDav or DIS.
    Custom code may be needed if you want to generate reports of more complex kind than are provided as default.
    2. I am not a WCM expert but I think all of what you specify is possible as you ask. But again I am not WCM expert. As I remember it from 6 and 7.x Site Studio you can create multiple websites and link them into each other dynamically and even display the same content in the different look and feel context of a different site. Site studio is simply pulling fragments and content dynamically from the CS behind it. And different sites can call the same content in different ways. Your code in the webpages should be able to determine if and when you display things in your micro sites. That is not a standard Term in WCM as I understand it (microsite) but the concept works.
    3. I may not understand the question, but my assumption of what you want is:
    Site studio websites can use many types of content (text, html, worddocs, openoffice docs,code fragments, multi media) all checked in individually, to build up one page for display.

  • Combine presentation hierarchy and display hierarchy

    Hi,
    We have a query with GL account and cost center in the rows.  We have a custom-built hierarchy on GL account and next to that we want to display our rows as a display hierarchy.  So far so good.
    But next we would like to show our GL account hierarchy upside down, meaning with the lower-level nodes above.  This setting however is not working in combination with the display hierarchy.  I guess the solution would be to also mark the display hierarchy as being "upside down", however as far as I know this is not possible.
    Anybody has a solution for this?
    Thanks!
    Veerle

    Hi,
    1: To add a new char, add the info object as external chars in the Info object maitainance scree --> hierarchy tab. Then go to create hierarcy option. Now it will add you to insert the info object as a node.
    2: Here you are mixing the Units in calculation.So you are getting the error as defined in TCODE RSCUSTV4. So as others given the idea, you can use the Data Function in a Formula (NO Dim).
    Happy Tony

  • Display records according month

    hi all.
    i want to display records according months.
    i created view something like this.
    create or replace view month_timer (item1, amount,item_date) as
    select item1,sum(amount),item_date
    from table
    where trunc(item_date) between to_date('01-jan-2010') and trunc(sysdate)
    AND item_TYPE!=4
    group by item1,item_date
    ORDER BY item_dateany suggestions?
    sarah

    create or replace view month_timer (item1, amount,item_date) as here in this statement you are using item1 and only tree columns.
    select pcd_plt_id,pcd_cbr_id ,sum(amount),item_date And here in this statement there are four columns. So which column is for item1
    group by item1,item_dateHere you can use only selected columns in group by. But you are using item1 which you used above for view.
    And in select there are three columns without aggregate function. And you are using only two here.
    If you could post the table data and desired output. Then it will be easier to find better way.
    -Ammad

  • How to display the value of  level axis in a scattered graph

    hi All,
    I have created a scatterd graph and i am able to show the X-axis and Y-axis values as tool tip. my requirement is to display the value of level axis also within the tool tip.
    please help me to configure the value of level axis as tooltip.
    thanks in advance

    Hi,
    Thanks for the reply. i was able to configure the tool tip for X and Y axis, but i was not able to shoe the third or level axis value in the tool tip.
    please help me in configuring the third or level axis value in tool tip.
    thanks in advance.

  • Change display language according to the user programmatically

    How to change the site displaying language according to the user ? Let say I've drop-down to select language in a web page according to that whole site display language change and also user's language in user profile need to change. How to do that in using
    server object model programmatically.

    Hi,
    According to your post, my understanding is that you wanted to display language according to the user.
    First, we can find out the current culture of the logged in user based on
    LCID.
    System.Threading.Thread.CurrentThread.CurrentUICulture.LCID
    Then you can set the language based on the LCID.
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/0e5d36e1-ec06-404a-ab2c-0e0ff475abec/how-to-change-the-language-based-on-log-in-user-programmatically-in-sharepoint-2013-how-to-change?forum=sharepointdevelopment
    http://sharepoint.stackexchange.com/questions/104140/change-site-display-language-according-to-the-user
    Thanks & Regards,
    Jason
    Jason Guo
    TechNet Community Support

  • IBE: Items Per Page for Display profile at Responsibility level

    Hi,
    we would like to have different number of items per page for different sites. We thought we would achieve it by setting profile "IBE: Items Per Page for Display" at the responsibility level and have unique responsibilities to access different sites.
    However, I saw that by default profile "IBE: Items Per Page for Display" is not visible at the responsibility level. Can I alter it to be visible at responsibility level in the profile definition and then set it at the responsibility level?
    Kindly help.
    Regards
    Harsha.

    I tried to change at SERV level and still the profile never gets updated. Kindly help.

  • Want to flatten my parent-child hierarchy into an level-based hierarchy.

    Hi Expert,
    Can anyone let me know how I can convert my parent-child hierarchy into an LEVEL-based hierarchy.
    Thanks in Advance
    S

    If you have an Oracle DB have a look on the CONNECT BY PRIOR functionality.
    regards
    John
    http://obiee101.blogspot.com

  • Ragged Hierarchy and Skip Level Hierarchy

    Hi all,
    I am confused with ragged and skip level hierarchy, as i read some documents related to obiee 11g.
    Will you please explain with an example the difference between ragged hierarchy and skip level hierarchy and also when to use these hierarchies?
    regards
    chandra kanth.

    Chandra Kanth,
    Hope this helps you
    http://blogs.simba.com/.a/6a00e3932f172e88340133f4d758b5970b-800wi
    Thanks,
    Saichand.v

  • How to display Hierarchy in WDA Search help

    Hello Experts,
    Please let me know if i can display hierarchy (tree like structure) in WD ABAP search help,i am quite new to WD ABAP.
    Any suggestions and inputs would be very helpful.
    Thanks & Regards,
    Siddharth

    I think tree UI element will be useful to you. Pls refer following links for more help:
    [Link1|http://help.sap.com/saphelp_nw70/helpdata/en/21/ad884118aa1709e10000000a155106/content.htm]
    [Link2|http://help.sap.com/saphelp_nw70/helpdata/en/59/a98b411fb4b05fe10000000a1550b0/frameset.htm]
    [Link3|http://help.sap.com/saphelp_nw70/helpdata/en/5a/088b41b4b3b25fe10000000a1550b0/frameset.htm]
    I had similar requirement of search help in my project. I had created component with tree ui element and called it using component usage in another component on click of button. I hope this will help you.
    Regards,
    Saket.

  • No unique display hierarchy - ERROR

    Hi,
    I get his below error for my profit center IO in my report.
    E025(R9E) Errors: No or no unique display hierarchy for 'Drill down characteristic' 'Profit Center'.
    Profit Center has a restriction on a hierarchy variable.
    Please let me know what this error means and how to rectify.
    Thanks,
    Arun KK

    Hi,
    I also have this problem.  I think this is caused because I want do make a selection on a characteristic using a hierarchy node variable.  However, I do not want this characteristic to display in the report using the hierarchy.
    This is the first time I try to do that with BI 7.0.  However, in previous versions, it was working fine...
    I couldn't find any notes.  Will let you know if I find something.
    Regards,
    Francine

  • RFX Response Header : Fill Display Fields on Header Level

    Hi Gurus,
    There is a requirement at the client place to add the Display only field for RFx Response Header. Based on this required I have done the following activities.
    1. From 'Define Customer Display Fields on Header Level' in  SPRO i have appended the ZFIELD in the Response header structure.
    2. From 'Configure Control for Fields on Header Level' in SPRO i have made it visible true.
    3. From 'Fill Display Fields on Header Level' SPRO i have Enhanced the /SAPSRM/BD_PDO_FE_FILL_HEADER with implementation. And have given required filter criteria. In the implementation Class it has the return parameter as CS_HEADER_DATA. Where i could fill the my ZFIELD.
    The field is now displaying in the SRM portal. But the problem is that the ZFIELD is not being filled with any value, even though i supplied it.
    Is there any step that is missing to set the value?
    Regards,
    Hobs

    Hi,
    The main technique is to do your calculations in PAI of the screen for additional data B for the line item but as you said it is accessed only when you goto-> item -> additional dataB
    So you can do one more thing...do the calculation in PAI/PBO of the screen first and in userexit_save_document_prepare recalculate again and overwrite the old ones(or calculate for only the ones which are initial in the item) ..so if he goes to additional data B screen you give the user what he wants and if he doesn't userexit_save_document_prepare takes care of it
    user can go to additional dataB only a line item at a time so the chance that he takes all the line items one by one is less(for huge number of line items)..so you just calculate and overwrite the fields in the in the userexit if the field value is empty...or you can recalculate for all the cases and overwrite just in case there may be a problem....
    in the screen of the additional dataB
    Write logic for calculating the field values
    so in the userexit you write like
    if the fields are initial..
    calculate
    else
    *already calculated from the screen because user has viewed it
    endif.
    So you are safe that user can see what he wants and you can reassure that the value will be calculated and stored on the SAVE from user exit
    Please check,revert
    Reward if helpful
    Regards
    Byju

Maybe you are looking for

  • Create Follow-up document from Service Contract automatically while saving

    Hi, In CRM 4.0, under the Service secnario, Service Data for Service Contract is related to -- 1. Interval value 2. Period Based on these parameter values how to generate the corresponding follow up documents automatically while saving the parent dou

  • Can you transfer data from one iPad to another iPad

    Can you transfer data, books and music from one iPad to another .

  • How to create new field while upgrading from CRM 4.0 to 7.0

    Hi , How do we create new field on UI and store data into existing field in database? Is there any option in AET to skip the creation of new field in the database table ? Custom field is already created in GUI and database table while using CRM 4.0 N

  • Cable Needed To Connect To HDTV?

    I have a Macbook and would like to hook it up to my new Vizio HDTV. What cable do I need to accomplish this? Here is a link to what the connection on the Vizio TV looks like in the back: http://img.photobucket.com/albums/v370/WhammX/0805081307.jpg No

  • Issues since iOS 8.3

    Hi Everyone - has anyone else had to endure the following since iOS 8.3? iPhone 5 1) Since the update, my iPhone 5 sometimes tries a reboot mid charge but locks up and I have to hold down the home and sleep button to coax it back into life. 2) Since