Display Hierarchy in Planning layout

Hi,
I am using a Cost Center Hierarchy in planning area, level & layout. After executing a planning folder, System is asking me the Fiscal Year, Plant, and Cost Center Hierarchy. In Herarchy I have selected the PM4. But in excel layout it display node of this this hierarfhy.
i.e. MILLA -> PM4 -> 220300
I have selected PM4 but in excel planning layout header it display 220300.
Our requirement is PM4 should be display in excel planning layout header.
If anyone have idea how to do this please guide me. Thanx in advance.
Regards
Manu

Hi Niel,
Thanx for your immediate reply.
1. Check into material master data itself whether it has the data (you can check either to master data & master data text). If you have no data, you need to fill it.
Yah I have loaded master data with text. When we go into BI and check maintian master data it shows plenty of records. So the data is there in BI.
2. Go to the corresponding material info-object, then edit it. Go to Business Explorer tab, you will see the setting for Query Def. filter Value Selection, you must set up it into Values in Master Data Table (M).
This setting is I have already done. But still I am facing problem.
When I click on that help button in web-layout. The new screen shows only selection fields but the below are blank.
Regards
Manoj

Similar Messages

Display multiple combination of values all at a time in the planning layout

Hi,
we are on BW 3.0B and SEM 3.1B. We've 2 characteristics "COUNTRY" and "CONTINENT" in planning level and package.
in the planning layout, we had placed "CONTINENT" in the lead columns and "COUNTRY" in the header are and COUNTRY is hidden.
Now, when we execute the layout for CONTINENT values "EUROPE and AFRICA" and COUNTRY values "GERMANY and SAFRICA".
output of the layout is as follows for country GERMANY
CONTINENT Value
EUROPE 123
EUROPE 234
EUROPE 456
as COUNTRY is in header, we need to scroll down (use down and upper arrows) to get values for next country SAFRICA combination of CONTINENT "AFRICA" in the layout as follows
CONTINENT value
AFRICA 342
AFRICA 267
AFRICA 768
How do we get the layout to display both AFRICA and EUROPE in the same page without a need to use arrows as follows
CONTINENT Value
EUROPE 123
EUROPE 234
EUROPE 456
AFRICA 342
AFRICA 267
AFRICA 768
the only solution, i can think of is move COUNTRY from header to lead columns. But, we have a need to keep COUNTRY in the header area. I doubt if we can achieve this, but i have some hope as COUNTRY is a hidden field in the header area which we can take advantage of.
any help is greatly appreciated.
thanks

Hi Marc,
yes. there u go. my name is hari.
thanks for your reply. sorry to confuse you. earlier, I just took a random example. Now, I am giving my problem in a more realistic way.
we have cube data as follows
Code Area Group Price
ABCD EUR 111 20USD
ABCD USA 222 30USD
Code, Area, Group are not attributes of each other.
we have a planning folder with variables for "Code" and "Area" with an input layout that has "Code and Group" in the header and "Area" in the lead columns.
after we execute folder, if we enter values "ABCD" for variable "Code" and variable range "EUR to USA" for "Area", current layout is as follows
======
Header
======
Code : ABCD
Group: 111 (not visible as Group is hidden in the header area of layout)
======
Layout
======
Area Price
EUR 20USD
for next combination, if we use down arrow to scroll down to Group 222, layout is as follows
======
Header
======
Code : ABCD
Group: 222 (not visible as Group is hidden in the header area of layout)
======
Layout
======
Area Price
USA 30USD
we are interested to see all "areas" for Code ABCD irrespective of "Group" as follows.
if we enter "ABCD" for Code and "EUR to USA" for "Area" variables, we need to have layout
======
Header
======
Code : ABCD
======
Layout
======
Area Price
EUR 20USD
USA 30USD
this might also work out for us.
======
Header
======
Code : ABCD
======
Layout
======
Area Price Group
EUR 20USD 111
USA 30USD 222
How do i achive this? we have a need to keep Group in the header area of the layout to get data from other source.
hope it is clear.
Message was edited by: hari143

Planning layout can no longer be displayed after transport

Hello everybody,
I have transported a planning area with all levels and so on.
I have several Manual Planning Layouts with key figures in data columns and rows defined individually.
I am using defined values of G/L Account characteristics in Lead column, each row is defined by a G/L Account number of a specific Chart of accounts predefined in the Header.
I load my G/L Account numbers with the same flat file in Development system and in Production system but after transport the layout cannot be displayed.
If I maintained G/L account characteristic in RSA1 on production system, I find all the account numbers for my Chart of accounts but if I try to define a value of G/L Account in my planning package, I do not find any values on my Chart of Account???
Could you help me??
Regards,
RaMa

Switch cube Load <> Planning solves the problem...
Thanks !
RaMa

Displaying a document in Excel planning layout

Hi,
I have attached a document in ALV Planning layout. Then I changed the format of the layout to Excel. In ALV I could see the cell as highlighted when a document is attached to it but in excel I can´t see the highlighted cell or icon to mention that this cell is having some document attached with it.
Can anyone tell what setting are required to display the icon or highlight the cell in the excel when a document is attached to it.
thanks

Hi Ravi,
Thank for answer me. But , yes.. I have set "display document". I can see the icon for Open Document, Delete Document and Create a Document in the header. But I still not see the icon over the cell where I can distinguist if exist or not document attatch.

Key figure flag in the planning layout

Hi,
Can anyone explain the importance of the key figure flag in the planning layout?
Regds
Pavan.

Hi Arun and Zegion,
Thank you for your responses.
Arun, I do not have any aggregates on the cube. I changed the aggregate properties of the Key Figure from SUM to Minimum. this has solved my problem temporarily.
the reason I am saying temporarily because this is a SAP delivered InfoObject. This is for the datasource 0CO_PC_PCP_01. When I read through the documents, it said, SUMMation for Aggregation and Last value for "Exception Aggregation" will display the value of KF as the last value and does not add them up.
Since this wasn't the happening in my query, I changed the Aggregation from SUM to Minimum.
Regards,
S.P

Issue with order or sequence of wbs elements appearance in planning layout

Hi Experts
we have an issue with order or sequence of wbs elements appearance in BPS planning layout.
In BW - 0wbs element - hierarchy order is as below
1
2
3
4
5
6
7
8
but when we check the same wbs element in BPS planning layout, it appears as below
1
2
3
4
6
7
5
8
Request you to advice how to correct the order.
Best Regards
krishna

Hi,
I came across a similar situation once. I dont remember exactly.
We have two different DataSources on wbs hierarchy. The hiearchy was loaded using the two datasources.
By mistake we were trying to use the hierarchy created by Datasource2, instead of hier created by datasource1.
Can you check that.

PCA planning layout

Hi,
we have to crate a profit center planning layout with users go from top most hierarchy level to the PC level. How can we get all the hierarchy by every level to be available to reach up to profit center level. How can we define the profit center hierachy level.
I am trying to create the same layout in PCA as the report painter but all the characteristics that are in the report painter are not available at planning layout. Is there any option to get all the characterstics into PCA.
Thanks,
Nivi

Hi Rajiv,
Thanks for your reply. I can't understand you explanation.
I cannot understand from this website although it has some explanation in length.
http://allian.uclv.net/saphelp/helpdata/EN/e9/f02c7dd435d1118b3f0060b03ca329/frameset.htm
The question is, I tested:
One layout with coloumn distribution key and one without distribution key; but the result of the report is same ...
What are the distribution key or other attrubute values actually for? Any solid examples?
Under teh DK columns, there are some selectable values, like the following:
0     Manual distribution
1     Equal distribution
2     Distribution as before
3     Distribution by percentage
4     Distribute values to following no-value periods
5     Copy values to following no-value periods
7     Distribute according to number of days in period

Error message when I calling planning layout in the STS

Dear
I'm trying to use Status and Tracking System with BPS ( SEM 4.0 SP10, BW 3.5 SP14 ).
But I got some error messages when I calling planning layout in the STS screen..
I designed 2 lower unit(A,B) and 1 upper unit(C) for the test. and using Bottom-up work-flow.
I did
1. Create Planning Area in the BPS0 ( also Level, Package, Layout ..)
2. Created Web Interface in the Web Interface Builder using the upper BPS Layout .
3. Customizing STS
    - Create Sub Plan & Session
    - Asssign Hierarchy to Sub Plan
    - Determine attribute for created planning session ( Bottom-up, Auto mail )
    - Define Header characteristics for planning session to contains the planning package completely.
    - Determine Date, Person Responsible and Layout.
4. Send Start mail
5. Open STS Web Start Screen ( using B Unit responsible user .)
When he click "Open Planning" icon in the screen the following error messages were happened...
I've no idea for that because I didn't use any variables or offset settings.
I guess that comes from header settings for the planning session because when I deleted the header settings for the planning sessions, I could see the planning layout.
but I could not use lock processing in the STS.
Could you tell me what's happening to me?
[ Following error message ]
Correct the data on variables and offset in character string "?
Message Number UPC_FW092
Long Text Diagnosis
Character string "", which contains data on the variables and offset, has an invalid format, and cannot be converted.
Procedure
Correct the character string, so that it has the correct format. A correct entry on variable and offset has the following form:
<VARIABLE_NAME> [{ + | - } OFFSET]
Examples:
VAR0
VAR1+1
VAR2 - 2.
Also check whether the variable, that you want to use is available in the planning area.

Hello,
this seems to be a bug. The error message should include a variable name between ''. Since there is none, the function that raises the error was not called correctly.
It's not likely that this is related to STS since STS does not use variables at all. It's probably a problem with the layout. If you can't resolve it, please open a message to SAP Support.
Regards
Marc
SAP NetWeaver RIG

Changing attribute order in a planning layout

Hi all,
I have a planning layout with one characteristic in lead column and 4 others attributes to be displayed with. The attributes appear with the following order:
-standard infoobject (sort by technical name).
-all other custom infoobjects /(sort by technical name too).
Is it possible to change this order?
Thanks for help
Vincent

No
I dont think that is possible.
Chirag S

Planning layout - If all KFs are Zero in Actual Cube

I have created two cubes, actuals and planning cubes. Created a planning layout in Multi planning area.
In the layout settings, i have selected , select from transactional Data option.
There are lot of entries in Actuals cube, for which all the Key figure values are zero.
However, i would like to show records also in the layout, so that users can enter the plan values.
Lets say, if the last year sales are zero ( from actual cube), still users would like to do the planning for future.
Is there any workaround to display those records from actuals cube for which all the key figure values are zero ?

I know, where to make the setting. Since we have 200000 products and 5000 customers, we would not want to select all possible combinations.
I would be interested writing a FOX formula ( 2nd part of Andrey's solution).
Anyway, i have figured out the workaround. I have just increased the number of decimal places in one KF. If all the KFs are Zero, in the cube transformation, i am changing the zero to 0,0001.
In the layout, i am displaying only 2 decimals.
It is working as expected.
Thanks a lot.....

Planning layout TEST cannot be used here

Hi,
When creating planning level in KEPM the following message displayed.
"Planning layout 0-GEN01 cannot be used here".
Thanks and regards
Murugesan

pl post this query in Controlling
thx, JK

Planning Layout Function

Hi Guys,
In the Manual planning Layout selection, Is it possible to have a range selection as you have in BW User Entry Variable in queries??
Or have a default setting that uses the last used value in the selection field????
K

Hi Koffi,
it is not possible to create variable with select options in BPS like in BW. The trick from Filip is good when you want to use a range. But often the entries are not well sorted and a range is not suitable.
In some cases it may be possible to use a hierarchy and a hierachy variable as a workaround. The hierarchy can be used as a kind of "predefined select options".
In a planning session you can choose a node of the hierarchy in the BPS-variable and get all entries of this node.
This solution is not very flexible but sometimes useful.
Regards
Thomas

Create User-Defined Planning Layouts for Detailed Planning

Dear All
I would like to change layout of Tcode CJR2.
I must copy planning layout "1-702" because I would like see:
sender cost center definition
sender activity type definition
alloc. cost definition.
what do I do?
Thanks
salvo50

Eli
I know what is already there. I would like to change layout of Tcode CJR2. I must add 3 following columns (display only) to those already there:
1. sender Cost Center Description LTEXT (new column - display only)
2. sender Activity Type Description LTEXT (new column - display only)
3. sender Cost Element Description LTEXT (new column - display only)
So my layout will appear:
sender Cost Center KOSTL
sender Cost Center Description LTEXT (new column - display only)
sender Activity Type LSTAR
sender Activity Type Description LTEXT (new column - display only)
total quantity MEG
sender Cost Element KSTAR
sender Cost Element Description LTEXT (new column - display only)
Is it possible ?
thanks
Salvo50

Multiple values for Time Characteristics (Ex: 0CALMONTH) in planning layout

Hello,
We are on BW - BPS 3.5v
We have a realtime infocube with only time characteristic 0CALMONTH.
There is a requirement that in my Planning layout I have to display the Keyfigures for:
(CURRENT MONTH) (CUMULATIVE 4 MONTHS FROM CURRENT MONTH) (CUMULATIVE 7 MONTHS FROM CUR MONTH)
I defined 3 exit variables on 0CALMONTH , one for Current Month, one for All 4 months from Current Month and another for All 7 months from Current Month.
In my planning layout when I use these variables for 0CALMONTH, I don't get the values for 4 months & 7 months.
I checked the variables are being populated with correct values. But when they get passed to the layout it doesn't read the Cube.
I got the basic doubt if we can give multiple values for the time characteristics in planning layout..??
Thanks for any suggestions.
Vish

Hi.
Did you created 3 restricted KF: one with KF amount and variable current month, second with amount and variable 4 monthes, third with amount and variable 7 monthes ?
Did you have match records in you cube ?
Regards.

Constant selection in IP planning layout

Hi everyone,
I have a budget planning layout where I'd like to give the user the opportunity to display various planning versions side-by-side. I also want to include the previous year figures (pry).
Since reference data might not exist at the time of displaying the layout, I have preselected 0VERSION and set its access type to "Master data". In the colums, I have a structure for the pry and the budget values. Underneath, there is a drilldown on 0VERSION.
Since there isn't really a planning version for pry figures, I wanted to restrict the pry column to 0VERSION=# and set a constant selection. This way I was hoping to prevent the drilldown of the preselected versions for the pry column, but it's displaying everything I preselected. # is not even displayed.
Is there a way around this?
Thanks and regards,
Tilman

Hi Tilman Budde ,
How are you ? I'm very new to intergated Planning ,But my client is planning to implement Captial Budget Planning and STS .Could you share any online help or input . ..
Thanks & Regards,
unath

Display Hierarchy in Planning layout

Similar Messages

Maybe you are looking for