Display hyperlinks in Preview 6.0

I use the standard Preview 6.0 that comes with Mountain Lion to view my pdf documents, and these contain many hyperlinks within. In the past versions of Preview, hyperlinks used to be highlighted with a red box round about them, hence clearly visible whilst reading. In the new versions of Preview (beginning with Snow Leopard, I believe), hyperlinks are no longer highlighted: the hyperlinked text is now indistinguishable from the rest of the text, and one only recognise a hyperlink when the pointer changes to the usual fist with a pointed index finger when one runs his mouse over it. Here are two images to illustrate what I'm talking about.
Good:
Bad:
I'd like to bring that good feature back.
Question 1: How can I make my hyperlinks clearly visible again in Preview 6.0?
Question 2: If this is possible, are there additional options? For example, instead of a red box round the hyperlinked text, the text is highlighted instead, perhaps with a different colour.
Cheers!

http://www.apple.com/feedback/macosx.html
https://discussions.apple.com/thread/4146481?tstart=0

Similar Messages

Preview app doesn't display hyperlinks

PDFs when opened in Apple's Preview App do not work with hyperlinks (including mailto:s). We've tried with various work flows from both windows apps, Apple's 'print pdf', Acrobat Pro. Other apps work fine: e.g. Adobe Reader, Safari.
I'm surprised not to see more discussion about this, is it a well known issue?
CM

Hyperlinks in PDFs that I create in Adobe InDesign work fine in Preview, assuming they were actually created as hyperlinks (versus text strings even with link-like formatting).
Some other apps try harder to interpret text strings as hyperlinks than Preview does.

Vendor Ref. no. not displayed in print preview in vendor aging report

Dear SAP team,
Vendor reference number is not displayed in print preview/print on vendor liabliteis aging report,
but this vendor reference number actually show in report,We are taking report by journal postings,
vendor reference entered in NumAtCard in AP invoice get copied to Ref2 in Journal Entry,then
why it is not showing in print preview/print.
Whether this is an application error / missing functionality ?
We are using SAP Business One 2005 B (7.40.252) SP: 00 PL: 36.
Whether upgrade to latest patch 2005B PL46 will solve this issue ?
Jeyakanthan

Hello Jeyakanthan,
I would like to draw your attention to the enhancements we delivered within Aging Report in 2007 version and plan for 8.8 release.
The primary enhancement in 2007 version is reflecting new concept of Internal Reconciliation with more convenient backward reporting.
Within the 8.8 release ...
- when you generate the aging report you can group the report by customer or sales employee in the customer receivables aging report, and by vendor or buyer in the vendor liabilities aging report;
- when the aging report has been generated, you can view multicustomer/multivendor detailed information in the aging report window. There is no need to double-click each customer/vendor row to view the details.
We would strongly to recommend you to upgrade to 2007 version or join the ramp-up of 8.8 release soon.
Peter Dominik
B1 Solution Management

How do I add a hyperlink in Preview 8.0 (Yosemite)?

How do I add a hyperlink in Preview 8.0 (Yosemite)?

Can't I just click on the link and have it go top the site?
The presentation must be in play for the link to be active.
I get the window shown here.
Your link doesnt work as it is an address for a file on your computer. Use the camera button in the menu bar of a reply to a post to show images.

Will not display images in preview in browse

Hello:
I am new to fireworks and am attempting to make a simple pop up menu but am having trouble viewing the image. First, I converted a .jpeg image to a button. I then put menu pop-up functions on this button. When I displayed it in preview with browser, the pop-up images displayed, but there was an "x'd" out image where the original should have been.
I was curious about why this was, figured that there was a problem with the file that I imported, and so I decided to just use one of the library's buttons. Again - the original button was "x'd" out but the pup-up functions displayed.
I therefore decided to go even more basic and simply painted an image gray and attempted to preview in browser. Again, "x'd" out image.
Can someone please tell me how to fix this?? It is driving me INSANE!!!!
The crazy thing is that earlier this morning, everything was working just fine. The images would display perfectly. Now, they are gone and I am at witt's end trying to figure out what the heck is going on.
If ANYONE could please help me, I would be in such gratitude.
Thanks
Ben (noob to web design)

If you think you're insane now, try maintaining those pop up menus.
As far as I know, these menus have not been updated since FW 8, so
they are at least two versions old.
Save yourself a lot of grief by avoiding those menus. There are many
other products on the market which do a much better job of creating
and maintaining this type of navigation structure.
Read this link before you climb any higher on this slippery slope:
http://apptools.com/rants/jsmenu.php
There was another blog post by the fellow who originally wrote the pop
up menu feature, but I can't seem to locate it. Even he says stay away
from them.
Not the answer you probably want, but I hope it helps, nonetheless.
Jim Babbage

Pdf not displayed correctly in preview

We have a new A) scanner (colortrac Ci40) and when we scan a pdf it is displayed in preview as if it is all wrinkled up.
Only in prewiew and if imorted in vectorworks. (on both OSX 10.5 and 10.6)
The same problem appears on a iPad.
It is not displayed correctly.
In all other programms I tried it is displayed properly.
We also have a small a4/a3 scanner from konica minolta and these scans display corectly in preview.
Is this only a preview problem and should I ignore it?

Hi there,
I have a very similar problem: a number of pdf files that I can see perfectly well in Safari/GoogleChrome do NOT show correctly in Preview or ANY iPad app I have (Notability, Adobe, PDF Expertm iAnnotate, Dropbox etc.).
The problem is that punctuation -- with the expection of periods or bolded text -- does not show properly. For example, commas and quotation marks to not show, and some numbers to not show.
Moreover, once I have annotated/viewed the problematic file on the IPad and resync to dropbox to view on Mac vis Adobe (which I do with most pdf files with no problems), I get an error message upon reopening the pdf file saying "Cannot extract the embedded font 'FAFWQV+--unknown-2--'. Some characters may not display or print correctly." (the 'quoted' text changes each time). When opening in Preview, no error message appears, though the fole is still lacking punctuation etc.
Here is a link to one problematic pdf:http://niis.cass.cn/upload/2012/12/d20121201200145301.pdf
NB: the file is in Mandarin, however I can successfully open/edit/annotate/sync other pdfs using Mandarin font so I'm not sure if the language is related to the problem.
I would be extremely grateful for some help with this please!
Thanks!

Subreport totals are not displayed correctly in Preview

I'm using Crystal Reports 2008. I have a subreport that sorts hiearchically. It is placed in the Report Header of the main report. Within the subreport, it has calculated totals for each hiearchy grouping. When ran, those totals are incorrectly displayed in the Preview; however, when I click on the subreport, those totals are displayed correctly in the preview of the subreport. Also, if I go to the subreport design, pretending I'm editing the subreport, then go back to the main report preview, those totals are correct.
Has anyone experienced this issue? Please provide help/advise. Thanks.

Shwu, The subreport does not process any value based on the main report. I also observed that if the group extends to next page, the totals are incorrectly displayed. I have both 'Keep Group Together' and section 'Keep Together' selected, but still the data extends to next page. The subreport is sorted with 'Hierarchical Grouping'. For example, below 2 lines are printed at bottom of a page:
North America
    Sales department
then Crystal prints the rest of departments belong to North America onto next page as:
     Marketing
     Consumer
         Government
         etc.
I was hoping if I could get Crystal to not print the group if there's not enough space on the page, but rather print on next new page, the incorrect totals would go away. Any idea how I would do page break for hierarchical groupings?

Bridge displays incorrect image previews! (Bridge 2.1.1.9)

Hello,
I am running Bridge CS3 2.1.1.9 on Windows XP SP2 fully patched. I intermittently see a problem where when browsing directories containing Nikon Raw files (NEF) from the D300, Bridge displays the wrong preview image for the file I select. For example, if I click on an image icon in one directory, the preview displayed is for a file in a different directory.
I've tried clearing the cache, etc, and nothing seems to change this.
Is this a known bug and/or is there a workaround I can use?
Thanks
-Bill
p.s. this is in addition to the fact that Bridge crashes every few minutes when I run it, so I find myself needing to restart it routinely during each working session.

Check out these 2 posts to see if they help.
http://www.adobeforums.com/webx/.59b516f6/4
http://www.adobeforums.com/webx/.59b51375/1

Took photos with iphone 4s. Pic displays in picture preview, but not in camera roll. Any advice? Pic should be on phone somewhere.

Took photo with iphone 4s. Picture displays in picture preview on bottom left, but is not in camera roll. Pic should be in phone somewhere since it's in preview. Any advice?

Ok try this kennylebouef,
Open multitasking by double tapping the home button (at the bottom), a row of apps you've recently used should appear, tap and hold the photos app until it wiggles and displays an x, tap the x to close and then reopen the camera roll app. Let me know if it works. It's odd and frustrating, I know.

Menu bar not displaying in browser preview.

After inserting my menu bar it doesn't display when I preview it in my browser. I have a rectangle sectioned for my main navigation menu and the menu bar sits on top of it...could this be causing it to not be seen? Also, it showed only once after pinning it...but that isn't what I want because when the page scrolls up and down the menu sits stationary...but it allows it to show??
Anyone have this issue or have a fix?
Thanks,
Lee

<header> and <footer> are html5 semantic tags. Old non-html5 browsers (like IE8) don't know how to handle them without a little help.
Add this code to your <head>

Or better yet, download the .js file and add it to your site, then link to it, that way you won't depend on third party servers keeping the file in the same location...
http://code.google.com/p/html5shiv/

Why do my work item display only in Preview pane

Hi,
I am trying to display my workitem in a full window but when I double click or execute it, it always displays in a preview pane. Is there a trick to make it display full screen.
Regards
Kasi

Hi Arghadip,
Thanks for your quick response. It is not general setting for sure. It displays in a full window with other already existing workflows in the system. It doesnt happend with the WF's that I just developed.
I checked every aspect with existing stuff but could not figure out what is happening.
Regards
Kasi

Does anyone know why all of a sudden any new parent divs I add won't display in browser preview?

Does anyone know why all of a sudden any new parent divs I add won't display in browser preview?

yes styles are applied. What does not show up are the container divs - they all have the thin purple borders.
The "Blog Lovers" image shows up but it is inside the #blogindex div - which seems to be invisible because the elements inside #blogindex div are just piled on top of each other. (see below html) This is now happening on all the pages of this site.
(I test a different site in DW and I was able to add divs and borders and content inside divs just fine.)

     <div id="blogindex">
        <div id="blog_image1"><img src="images/bloglovers.gif" alt="Blog Lovers" /></div>
         <div id="blog_image2"><img src="images/gcblogheader350x70.jpg" alt="Gina Charles Blog" /></div>
      <div id="blogindex_text">
      <p class="blackbolditalic">Visit the blog for happenings, highlights and conversation! </p></div>
      </div>
   
http://www.newworldapparel.com/tests/ -scroll 1/2 way down page to see the "Blog Lovers" pile up!

In my smart form why main's content din't display in print preview?Plz help

In my smart form why main's content din't display in print preview?Plz help me.
Regards
Indu
Moderator message: too vague, help not possible, please describe problems in all technical detail when posting again.
Edited by: Thomas Zloch on Jan 5, 2011 3:27 PM

make sure u've specified da style in output options of text element as
TIMES 10 in style field and select da desired paragraph and charcter format in general attributes tab of da text element.activaTE AND CHECK.
if problem still persists u can ask again.
reward points if it helps.

Condition type freight is not getting displayed in print preview

Hi,
I created PO, and while seeing its print preview:
Condition type freight is not getting displayed.
Where i missed?
Uts

hi,
Inddition to M/08...(As given above)...
Also do check the smart form or SAP script...used for the output...check it with the ABAPer...whether the field is liable for o/p or not??
Smart form is attached at message type of message determination..
Regards
Priyanka.P

SQL Report--NEED to display HYPERLINK

Hi. I need to display a hyperlink for one of the columns in a SQL Report. Here are my columns url, name, type.
I want the name column to be hyperlinks to the corresponding entry in the url column.
Here's the sql that I was trying to get to work based on what someone else helped me with:
select type, ''| |name| |''web
from interop.links
Here is the results when I run the report:
<#''.LABEL#>
<#''.FIELD#>
<#''.FIELD#>
<#''.FIELD#>
<#''.FIELD#>
<#''.FIELD#> ...etc, etc.
Does anyone have suggestions for what I am doing wrong or another solution? I really need to figure out how to do this. Thanks!
Michelle
null

Hi,
Here is what I understand from your question.
You have 3 columns
URL
NAME
TYPE
Say you have url=> www[dot]oracle[dot]com
name=>Uncle Larry is always right
you want name to have a href which points to
the value in column url
so you need
select url as the_url,''| |name| |'' as the_name,type from the table
null

Display hyperlinks in Preview 6.0

Similar Messages

Maybe you are looking for