Display IC corrupted
Blank display, connected to tv via hdmi and to monitor via vga still blank. Tried with single ram in both slots alternatively still blank. Reconnected hdd still the same. The fan is running, the caps lock touch pad lock, wifi when toggled the indicator light changes. Consulted with a technician, who tells that it is possibly a IC got corrupted (maybe of the vga or graphic). Is it repairable without replacing motherboard. If so then, where do I find the IC. What is the IC model number and what else do I need to do?
Using: HP Pavilion dv6-3050tx nb India
Product number: XB772PA#ACJ
Hey @Xaphene ,
Welcome to the HP Forums!
I understand you're looking for information on replacement parts for your dv6 notebook.
You'll need to be a bit more specific about which part you're trying to replace. IC could mean Internal Cable, Inverter Cable, Integrated Circuit, or a few other things.
You can find a complete guide of replacement parts for your notebook here: HP Pavilion dv6 Entertainment PC - Maintenance and Service Guide. You can order parts directly from hp at the HP Part Surfer website, or third party sites like Amazon or eBay. If the part you are looking for is not listed in here it would not be available from HP and you would need to depend on third party vendors.
To be honest, in this type of scenario you've described you typically need a motherboard replacement and I would suggest contacting HP Phone Support to set up service. Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the following link to get the support number for your region: Phone Assist Worldwide.
Thanks!
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.
Similar Messages
-
Hp laserjet 1536dnf MFP LCD panel displays "firmware corrupt ready 2 download"
Hi guys
Am new in the forums but i beleive somebody somewhere has a solution for the following: a client tried updating the firmware for the above printer but ended up with the message, "Firmware corrupt Ready 2 download". Is there any combinations of buttons to press to do a cold reset?
Mst2015Hi @Mst2015 ,
I see by your post that after doing a firmware update on the printer, the printer displays "firmware corrupt ready 2 download". I would really like to be able to help you resolve this issue.
Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation.
I can send you that information in a private message.
In the forum beside your handle name just click on the envelope to view it.
You should always do the firmware update by a USB connection.
Please let me know if you require any additional assistance.
Have a fantastic day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP -
Display is corrupted for GDM / Gnome (ATI card)
I've done a clean install of Arch on a Toshiba laptop, but when gdm starts the display is corrupted with lots of strange artefacts (diagonal slashes across the screen, that sort of thing). Previously Gnome/GDM worked fine on this same laptop.
When I try running startx with xorg-twm installed, the screen displays fine, so I don't think it can be an Xorg problem per se.
Any help will be gratefully received!
Not sure what information people will find most useful, but here is the output of lspci:
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD/ATI] RS690 Host Bridge
00:01.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RS690 PCI to PCI Bridge (Internal gfx)
00:04.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] Device 7914
00:05.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RS690 PCI to PCI Bridge (PCI Express Port 1)
00:06.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RS690 PCI to PCI Bridge (PCI Express Port 2)
00:12.0 SATA controller: Advanced Micro Devices, Inc. [AMD/ATI] SB600 Non-Raid-5 SATA
00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB600 USB (OHCI0)
00:13.1 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB600 USB (OHCI1)
00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB600 USB (OHCI2)
00:13.3 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB600 USB (OHCI3)
00:13.4 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB600 USB (OHCI4)
00:13.5 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB600 USB Controller (EHCI)
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller (rev 14)
00:14.1 IDE interface: Advanced Micro Devices, Inc. [AMD/ATI] SB600 IDE
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB600 PCI to LPC Bridge
00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:05.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RS690M [Radeon Xpress 1200/1250/1270]
08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 01)
14:06.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
14:06.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
14:06.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
14:06.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)
Am running the latest 64-bit kernel and have latest xf86-video-ati driver installed. System is generally up to date - though the problem goes back to when I did the install two or three weeks ago, so it's not to do with any new version since then.
Content of /var/log/Xorg.0.log:
[ 12.559]
X.Org X Server 1.14.4
Release Date: 2013-10-31
[ 12.559] X Protocol Version 11, Revision 0
[ 12.559] Build Operating System: Linux 3.11.6-1-ARCH x86_64
[ 12.559] Current Operating System: Linux toshiba-64-laptop 3.11.6-1-ARCH #1 SMP PREEMPT Fri Oct 18 23:22:36 CEST 2013 x86_64
[ 12.559] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=dcfe064f-9439-44c0-aff1-35896be3dc69 rw quiet
[ 12.560] Build Date: 01 November 2013 05:10:48PM
[ 12.560]
[ 12.560] Current version of pixman: 0.30.2
[ 12.560] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 12.560] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 12.560] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Nov 9 11:12:28 2013
[ 12.742] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 12.742] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 12.914] (==) No Layout section. Using the first Screen section.
[ 12.914] (==) No screen section available. Using defaults.
[ 12.914] (**) |-->Screen "Default Screen Section" (0)
[ 12.914] (**) | |-->Monitor "<default monitor>"
[ 12.914] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 12.915] (**) | |-->Device "Radeon"
[ 12.915] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 12.915] (==) Automatically adding devices
[ 12.915] (==) Automatically enabling devices
[ 12.915] (==) Automatically adding GPU devices
[ 12.958] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 12.958] Entry deleted from font path.
[ 12.998] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 12.998] Entry deleted from font path.
[ 12.998] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 12.998] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 12.998] Entry deleted from font path.
[ 12.998] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 12.998] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 12.998] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 12.998] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 12.998] (II) Loader magic: 0x7fdc20
[ 12.998] (II) Module ABI versions:
[ 12.998] X.Org ANSI C Emulation: 0.4
[ 12.999] X.Org Video Driver: 14.1
[ 12.999] X.Org XInput driver : 19.1
[ 12.999] X.Org Server Extension : 7.0
[ 13.000] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 13.005] (--) PCI:*(0:1:5:0) 1002:791f:1179:ff1a rev 0, Mem @ 0xf0000000/134217728, 0xf8100000/65536, 0xf8000000/1048576, I/O @ 0x00009000/256
[ 13.034] Initializing built-in extension Generic Event Extension
[ 13.034] Initializing built-in extension SHAPE
[ 13.034] Initializing built-in extension MIT-SHM
[ 13.034] Initializing built-in extension XInputExtension
[ 13.034] Initializing built-in extension XTEST
[ 13.034] Initializing built-in extension BIG-REQUESTS
[ 13.034] Initializing built-in extension SYNC
[ 13.034] Initializing built-in extension XKEYBOARD
[ 13.034] Initializing built-in extension XC-MISC
[ 13.034] Initializing built-in extension SECURITY
[ 13.034] Initializing built-in extension XINERAMA
[ 13.034] Initializing built-in extension XFIXES
[ 13.034] Initializing built-in extension RENDER
[ 13.035] Initializing built-in extension RANDR
[ 13.035] Initializing built-in extension COMPOSITE
[ 13.035] Initializing built-in extension DAMAGE
[ 13.035] Initializing built-in extension MIT-SCREEN-SAVER
[ 13.035] Initializing built-in extension DOUBLE-BUFFER
[ 13.035] Initializing built-in extension RECORD
[ 13.035] Initializing built-in extension DPMS
[ 13.035] Initializing built-in extension X-Resource
[ 13.035] Initializing built-in extension XVideo
[ 13.035] Initializing built-in extension XVideo-MotionCompensation
[ 13.035] Initializing built-in extension XFree86-VidModeExtension
[ 13.035] Initializing built-in extension XFree86-DGA
[ 13.035] Initializing built-in extension XFree86-DRI
[ 13.035] Initializing built-in extension DRI2
[ 13.035] (II) "glx" will be loaded by default.
[ 13.035] (II) LoadModule: "dri2"
[ 13.036] (II) Module "dri2" already built-in
[ 13.036] (II) LoadModule: "glamoregl"
[ 13.106] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 13.582] (II) Module glamoregl: vendor="X.Org Foundation"
[ 13.582] compiled for 1.14.2, module version = 0.5.1
[ 13.582] ABI class: X.Org ANSI C Emulation, version 0.4
[ 13.582] (II) LoadModule: "glx"
[ 13.583] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 13.662] (II) Module glx: vendor="X.Org Foundation"
[ 13.662] compiled for 1.14.4, module version = 1.0.0
[ 13.662] ABI class: X.Org Server Extension, version 7.0
[ 13.662] (==) AIGLX enabled
[ 13.663] Loading extension GLX
[ 13.663] (II) LoadModule: "radeon"
[ 13.663] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 13.700] (II) Module radeon: vendor="X.Org Foundation"
[ 13.700] compiled for 1.14.2, module version = 7.2.0
[ 13.700] Module class: X.Org Video Driver
[ 13.700] ABI class: X.Org Video Driver, version 14.1
[ 13.700] (II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
ATI Mobility Radeon HD 4670, ATI FirePro M5750,
ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6300 Series Graphics,
AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
ATI Mobility Radeon Graphics, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
BARTS, BARTS, Mobility Radeon HD 6000 Series,
Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, TAHITI, TAHITI, TAHITI, TAHITI,
TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI,
TAHITI, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND,
OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, HAINAN, HAINAN, HAINAN,
HAINAN, HAINAN, HAINAN, BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE,
BONAIRE, BONAIRE, BONAIRE, KABINI, KABINI, KABINI, KABINI, KABINI,
KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI,
KABINI, KABINI, KABINI
[ 13.748] (++) using VT number 1
[ 13.755] (II) [KMS] Kernel modesetting enabled.
[ 13.755] (II) RADEON(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 13.755] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[ 13.756] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 13.756] (==) RADEON(0): Default visual is TrueColor
[ 13.756] (**) RADEON(0): Option "EXAPixmaps" "off"
[ 13.756] (==) RADEON(0): RGB weight 888
[ 13.756] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[ 13.756] (--) RADEON(0): Chipset: "ATI Radeon X1200" (ChipID = 0x791f)
[ 13.756] (II) Loading sub module "dri2"
[ 13.756] (II) LoadModule: "dri2"
[ 13.756] (II) Module "dri2" already built-in
[ 13.756] (II) Loading sub module "exa"
[ 13.757] (II) LoadModule: "exa"
[ 13.757] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 13.764] (II) Module exa: vendor="X.Org Foundation"
[ 13.764] compiled for 1.14.4, module version = 2.6.0
[ 13.764] ABI class: X.Org Video Driver, version 14.1
[ 13.765] (II) RADEON(0): KMS Color Tiling: enabled
[ 13.765] (II) RADEON(0): KMS Color Tiling 2D: disabled
[ 13.765] (II) RADEON(0): KMS Pageflipping: enabled
[ 13.765] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[ 13.930] (II) RADEON(0): Output VGA-0 has no monitor section
[ 13.930] (II) RADEON(0): Output LVDS has no monitor section
[ 14.096] (II) RADEON(0): Output S-video has no monitor section
[ 14.263] (II) RADEON(0): EDID for output VGA-0
[ 14.263] (II) RADEON(0): EDID for output LVDS
[ 14.263] (II) RADEON(0): Manufacturer: SEC Model: 3645 Serial#: 0
[ 14.263] (II) RADEON(0): Year: 2005 Week: 0
[ 14.264] (II) RADEON(0): EDID Version: 1.3
[ 14.264] (II) RADEON(0): Digital Display Input
[ 14.264] (II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
[ 14.264] (II) RADEON(0): Gamma: 2.20
[ 14.264] (II) RADEON(0): No DPMS capabilities specified
[ 14.264] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 14.264] (II) RADEON(0): First detailed timing is preferred mode
[ 14.264] (II) RADEON(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550
[ 14.264] (II) RADEON(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
[ 14.264] (II) RADEON(0): Manufacturer's mask: 0
[ 14.264] (II) RADEON(0): Supported detailed timing:
[ 14.264] (II) RADEON(0): clock: 68.9 MHz Image Size: 331 x 207 mm
[ 14.264] (II) RADEON(0): h_active: 1280 h_sync: 1296 h_sync_end 1344 h_blank_end 1408 h_border: 0
[ 14.264] (II) RADEON(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 816 v_border: 0
[ 14.265] (II) RADEON(0): Unknown vendor-specific block f
[ 14.265] (II) RADEON(0): SAMSUNG
[ 14.265] (II) RADEON(0): LTN154X3-L05
[ 14.265] (II) RADEON(0): EDID (in hex):
[ 14.265] (II) RADEON(0): 00ffffffffffff004ca3453600000000
[ 14.265] (II) RADEON(0): 000f0103802115780a87f594574f8c27
[ 14.265] (II) RADEON(0): 27505400000001010101010101010101
[ 14.265] (II) RADEON(0): 010101010101ee1a0080502010301030
[ 14.265] (II) RADEON(0): 13004bcf100000190000000f00000000
[ 14.265] (II) RADEON(0): 00000000002387026400000000fe0053
[ 14.265] (II) RADEON(0): 414d53554e470a2020202020000000fe
[ 14.265] (II) RADEON(0): 004c544e31353458332d4c30350a0061
[ 14.265] (II) RADEON(0): Printing probed modes for output LVDS
[ 14.265] (II) RADEON(0): Modeline "1280x800"x60.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz eP)
[ 14.265] (II) RADEON(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz)
[ 14.266] (II) RADEON(0): Modeline "1152x768"x59.8 71.75 1152 1216 1328 1504 768 771 781 798 -hsync +vsync (47.7 kHz)
[ 14.266] (II) RADEON(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz)
[ 14.266] (II) RADEON(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz)
[ 14.266] (II) RADEON(0): Modeline "848x480"x59.7 31.50 848 872 952 1056 480 483 493 500 -hsync +vsync (29.8 kHz)
[ 14.266] (II) RADEON(0): Modeline "720x480"x59.7 26.75 720 744 808 896 480 483 493 500 -hsync +vsync (29.9 kHz)
[ 14.266] (II) RADEON(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz)
[ 14.430] (II) RADEON(0): EDID for output S-video
[ 14.430] (II) RADEON(0): Output VGA-0 disconnected
[ 14.430] (II) RADEON(0): Output LVDS connected
[ 14.430] (II) RADEON(0): Output S-video disconnected
[ 14.430] (II) RADEON(0): Using exact sizes for initial modes
[ 14.430] (II) RADEON(0): Output LVDS using initial mode 1280x800
[ 14.430] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 14.430] (II) RADEON(0): mem size init: gart size :1fdff000 vram size: s:8000000 visible:7bd8000
[ 14.430] (II) RADEON(0): EXA: Driver will not allow EXA pixmaps in VRAM
[ 14.430] (==) RADEON(0): DPI set to (96, 96)
[ 14.430] (II) Loading sub module "fb"
[ 14.430] (II) LoadModule: "fb"
[ 14.431] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 14.443] (II) Module fb: vendor="X.Org Foundation"
[ 14.444] compiled for 1.14.4, module version = 1.0.0
[ 14.444] ABI class: X.Org ANSI C Emulation, version 0.4
[ 14.444] (II) Loading sub module "ramdac"
[ 14.444] (II) LoadModule: "ramdac"
[ 14.444] (II) Module "ramdac" already built-in
[ 14.444] (--) Depth 24 pixmap format is 32 bpp
[ 14.445] (II) RADEON(0): [DRI2] Setup complete
[ 14.445] (II) RADEON(0): [DRI2] DRI driver: r300
[ 14.445] (II) RADEON(0): [DRI2] VDPAU driver: r300
[ 14.446] (II) RADEON(0): Front buffer size: 4000K
[ 14.446] (II) RADEON(0): VRAM usage limit set to 110505K
[ 14.447] (==) RADEON(0): Backing store disabled
[ 14.448] (II) RADEON(0): Direct rendering enabled
[ 14.448] (II) RADEON(0): Render acceleration enabled for R300/R400/R500 type cards.
[ 14.448] (II) EXA(0): Driver allocated offscreen pixmaps
[ 14.448] (II) EXA(0): Driver registered support for the following operations:
[ 14.448] (II) Solid
[ 14.448] (II) Copy
[ 14.448] (II) Composite (RENDER acceleration)
[ 14.448] (II) UploadToScreen
[ 14.448] (II) DownloadFromScreen
[ 14.448] (II) RADEON(0): Acceleration enabled
[ 14.448] (==) RADEON(0): DPMS enabled
[ 14.448] (==) RADEON(0): Silken mouse enabled
[ 14.449] (II) RADEON(0): Set up textured video
[ 14.449] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
[ 14.449] (II) RADEON(0): [XvMC] Extension initialized.
[ 14.449] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 14.450] (WW) RADEON(0): Option "AccelDFS" is not used
[ 14.450] (--) RandR disabled
[ 15.236] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 15.236] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 15.236] (II) AIGLX: enabled GLX_ARB_create_context
[ 15.236] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 15.236] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 15.236] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 15.236] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 15.238] (II) AIGLX: Loaded and initialized r300
[ 15.238] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 15.254] (II) RADEON(0): Setting screen physical size to 338 x 211
[ 15.775] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 15.776] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 15.776] (II) LoadModule: "evdev"
[ 15.776] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 15.788] (II) Module evdev: vendor="X.Org Foundation"
[ 15.788] compiled for 1.14.3, module version = 2.8.2
[ 15.788] Module class: X.Org XInput Driver
[ 15.788] ABI class: X.Org XInput driver, version 19.1
[ 15.788] (II) Using input driver 'evdev' for 'Power Button'
[ 15.789] (**) Power Button: always reports core events
[ 15.789] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 15.789] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 15.789] (--) evdev: Power Button: Found keys
[ 15.789] (II) evdev: Power Button: Configuring as keyboard
[ 15.789] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 15.789] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 15.789] (**) Option "xkb_rules" "evdev"
[ 15.789] (**) Option "xkb_model" "pc104"
[ 15.789] (**) Option "xkb_layout" "us"
[ 15.905] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 15.906] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 15.906] (II) Using input driver 'evdev' for 'Video Bus'
[ 15.906] (**) Video Bus: always reports core events
[ 15.906] (**) evdev: Video Bus: Device: "/dev/input/event4"
[ 15.906] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 15.906] (--) evdev: Video Bus: Found keys
[ 15.906] (II) evdev: Video Bus: Configuring as keyboard
[ 15.906] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:1d/LNXVIDEO:00/input/input4/event4"
[ 15.906] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 15.906] (**) Option "xkb_rules" "evdev"
[ 15.906] (**) Option "xkb_model" "pc104"
[ 15.906] (**) Option "xkb_layout" "us"
[ 15.908] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 15.908] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 15.908] (II) Using input driver 'evdev' for 'Power Button'
[ 15.908] (**) Power Button: always reports core events
[ 15.908] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 15.909] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 15.909] (--) evdev: Power Button: Found keys
[ 15.909] (II) evdev: Power Button: Configuring as keyboard
[ 15.909] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
[ 15.909] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 15.909] (**) Option "xkb_rules" "evdev"
[ 15.909] (**) Option "xkb_model" "pc104"
[ 15.909] (**) Option "xkb_layout" "us"
[ 15.911] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 15.911] (II) No input driver specified, ignoring this device.
[ 15.911] (II) This device may have been added with another device file.
[ 15.911] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 15.912] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[ 15.913] (II) No input driver specified, ignoring this device.
[ 15.913] (II) This device may have been added with another device file.
[ 15.913] (II) config/udev: Adding input device HDA ATI SB Front Headphone (/dev/input/event8)
[ 15.914] (II) No input driver specified, ignoring this device.
[ 15.914] (II) This device may have been added with another device file.
[ 15.914] (II) config/udev: Adding input device HDA ATI SB Mic (/dev/input/event9)
[ 15.914] (II) No input driver specified, ignoring this device.
[ 15.915] (II) This device may have been added with another device file.
[ 15.915] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 15.915] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 15.916] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 15.916] (**) AT Translated Set 2 keyboard: always reports core events
[ 15.916] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 15.916] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 15.916] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 15.916] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 15.916] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 15.916] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 15.916] (**) Option "xkb_rules" "evdev"
[ 15.916] (**) Option "xkb_model" "pc104"
[ 15.916] (**) Option "xkb_layout" "us"
[ 15.918] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event10)
[ 15.918] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 15.918] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 15.918] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 15.918] (II) LoadModule: "synaptics"
[ 15.919] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 16.021] (II) Module synaptics: vendor="X.Org Foundation"
[ 16.021] compiled for 1.14.1, module version = 1.7.1
[ 16.021] Module class: X.Org XInput Driver
[ 16.021] ABI class: X.Org XInput driver, version 19.1
[ 16.021] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 16.022] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 16.022] (**) Option "Device" "/dev/input/event10"
[ 16.093] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472 (res 61)
[ 16.093] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448 (res 81)
[ 16.093] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 16.093] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 16.093] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple scroll-buttons
[ 16.094] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 16.094] (**) Option "TapButton1" "1"
[ 16.094] (**) Option "TapButton2" "2"
[ 16.094] (**) Option "TapButton3" "3"
[ 16.094] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 16.094] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 16.126] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input10/event10"
[ 16.126] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 10)
[ 16.127] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 16.127] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 16.127] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.040
[ 16.128] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 16.128] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 16.128] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 16.128] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 16.128] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 16.129] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 16.129] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 16.130] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 16.130] (II) No input driver specified, ignoring this device.
[ 16.130] (II) This device may have been added with another device file.
[ 16.132] (II) config/udev: Adding input device Toshiba input device (/dev/input/event5)
[ 16.132] (**) Toshiba input device: Applying InputClass "evdev keyboard catchall"
[ 16.132] (II) Using input driver 'evdev' for 'Toshiba input device'
[ 16.132] (**) Toshiba input device: always reports core events
[ 16.132] (**) evdev: Toshiba input device: Device: "/dev/input/event5"
[ 16.132] (--) evdev: Toshiba input device: Vendor 0 Product 0
[ 16.132] (--) evdev: Toshiba input device: Found keys
[ 16.133] (II) evdev: Toshiba input device: Configuring as keyboard
[ 16.133] (**) Option "config_info" "udev:/sys/devices/virtual/input/input5/event5"
[ 16.133] (II) XINPUT: Adding extended input device "Toshiba input device" (type: KEYBOARD, id 11)
[ 16.133] (**) Option "xkb_rules" "evdev"
[ 16.133] (**) Option "xkb_model" "pc104"
[ 16.133] (**) Option "xkb_layout" "us"
[ 24.913] (II) RADEON(0): EDID vendor "SEC", prod id 13893
[ 24.913] (II) RADEON(0): Printing DDC gathered Modelines:
[ 24.913] (II) RADEON(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz eP)
[ 27.980] (II) RADEON(0): EDID vendor "SEC", prod id 13893
[ 27.980] (II) RADEON(0): Printing DDC gathered Modelines:
[ 27.980] (II) RADEON(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz eP)
[ 57.993] (II) AIGLX: Suspending AIGLX clients for VT switch
If any other information would be useful, please let me know.Supposed to mean a lack of good/clean +12VDC at the molex connector or could be flaky components in the DC-DC conversion on the board( ie bad voltage regulator or capacitors ).
-
I just replaced my old iPod with an 80GB, which has been great for the 11 days I have had it, but suddenly the display became corrupted. At first it seemed like the contrast was too high (basically a white screen), but then the menu came on, but with poor resolution and some flickering on the screen. Has anyone else had this? I tried a hard reset and drained then charged the battery.
I am in China (Shanghai), but the service website for China is in Chinese (which I don't read), so I cannot locate a service center. Advice?
PowerbookSee:
* http://kb.mozillazine.org/Website_colors_are_wrong
* [[Websites look wrong]] -
High Quality Display -appears corrupted
Hello,
I have a problem with High Quality display of placed TIF files (InDesign CS3 5.0.4). When viewed at high magnification the image is replaced by a solid black with diagonal black & white lines across the top section.
I've read through the archives of display performance issues and tried the suggestions, but have been unsuccessful in resolving the issue:
1) Restored preferences
Ensured the following options are selected:
2) Object Display Performance > High Quality
3) View > Display Performance > Allow Object Level Display Settings
Placement of the image is critical with what I do, so because the issue is normally associated with CMYK TIFs I can usually use a Gray TIF to position correctly, then replace this with the CMYK version. However, the more complex the layout becomes, the Gray TIF too becomes "corrupted" at a high zoom factor. Of course, the exported PDF is always true, but I really need to view truly at high magnification in InDesign.
I close all other applications to ensure it is not a RAM problem, but to no avail. Any suggestions would be greatly appreciated.
Thank you.
MacBook Pro 2.33 GHz Intel Core Duo
3GB 667 MHz DDR2 SDRAM
Mac OS X 10.4.11Marvin,
The TIF file in this example consists of a repeating sequence of adjacent columns in the following configuration: 8 white pixel, 7 black pixels.
This pattern repeats across the width of the file.
I've attached one of these files below. Please try to view it at 4000% when placed in InDesign.
(Please note that this problem also occurs with photographic images as well).
If I then crop the attached file in Photoshop, re-save and place in InDesign it will preview correctly at 4000%.
If I leave it at its original dimensions, but convert to a Gray TIF, it will preview correctly -for a while, but eventually also become "corrupted". As I mentioned in my initial post, I've had to use a Grey TIF to get the placement correct, then replace with the CMYK TIF version. Saving with and without LZW compression makes no difference. The fact that the Grey version works temporarily has got me confused. As it happens, for the moment anyway, a narrow width file in CMYK is previewing okay, but then in the past I've used TIFs just ~100 mm wide and had the same problem. -
2/3rds of all versions are displayed totally corrupted
Bizarre time.
I may need to reinstall Aperture (just ran a rebuild to no effect). Here's what's happening:
- When I first open a library, the versions are displayed correctly. After reviewing a few versions, the histogram goes moves to the right like a rolling wave and the image gets blown out.
- Close and re-open and the same.
- Open a different library and again the versions look OK, but after a few mins., these corrupt also.
- The RAW master images display fine despite the version being blown out
- The version levels histogram remains consistent with a valid image despite the topmost histogram being pushed to the right.
Anyone else seen something/anything like this? Only just put 10.5.5 up so maybe ....
PMG5 Quad w/ATI x1900G5 and OS X 10.5.5
GHi Don,
Yes its 10.5.5 and graphics card combo. I'm not sure it is levels as I tweak almost all of them but you may well be on to something.
I blew Aperture away (completely down to items in System/Library) and reinstalled from 2.0 with 2.1.1 update. No joy.
I copied the library and ref. master images to a MBPro and a MBAir, both running 10.5.5 and Ap 2.1.1 ..... all OK. So my next task is to remove the ATI graphics card and reinstall the boat anchor nVidia 6600. -
ATI Displays rotate corrupted screen display
I'm running Mac OS Tiger and running AT Displays 4.5.6 and I tried to use the rotate command. I am not running an external monitor. Now the screen is rotated but totally garbled except for the mouse pointer. Even if I restart the PowerBook the screen gets messed up just before the log-in so I can't change the preference back. The computer is unusable in this condition.
I am able to start-up the computer via an eDrive I had created on a separate partition so I know the PowerBook still works fine and I can access the hard drive, but what files do I remove to get rid of this problem? Or is there some other way to get around this?mine did this too. It used to not be a problem under 10.4.2, but the one time I tried it after upgrading to 10.4.3 it did it, I ain't trying it again.
I paniced a bit too, however, all you have to do is start up without the extensions loading (cmd shift at login). At that point my display became usuable again. I tried narrowing the pref file down, but didn't nail it - after removing all the prefs, then slowly adding them back 50% at a time through restarts I couldn't reestablish it, so I presume that one of the prefs file was remade for a standard orientation, and slipped through my net.
I repeat though, it does NOT require a reinstall, but until it's resolved, I shan't be trying to rotate the screen for better bedtime movie watching
cheers -
Hi I hope someone could help me on this
I have a mac mini and today after I installed an software update(Missing Sync for Palm), after rebooting, the display resolution has changed, the symptoms are:
1. the screen becomes larger than the actual display, so it is like My monitor can only view a portion of the whole desktop, and when I move my mouse cursor to a certain direction, the screen will move to that part correspondingly.
2. the overall display quality is worse, texts and images are not as sharp as before, this is quite noticeable.
So i have tried the following , but none helped
1. remove the causing software using appzap
2. clear PRAM NRAM
3. adjust display resolution and freq( no matter what resolution I use, the problem still exists)
4. repair disk permissions
Please HELP, thanks a lot in advance.Press Command-Option-8 once or twice.
-
My display is corrupted when using the admin account
I have like 16 bit color when I am using my admin account. When I use any other account the display is fine.
Open the Universal Access pane of System Preferences, click on Seeing, set the display to use Black & White, turn off all the checkboxes except for the one relating to assistive devices, which doesn't matter, and move the contrast slider all the way to the left.
(20928) -
Played fruit ninja and now my display is corrupted.
Played fruit ninja (free version) on iPhone 5 running iOS 6.0.1 and now my display is reverse-video in all apps--even the camera! Deleted app, restarted phone but no good. Ideas?
Got my answer: somehow it changed my system setting to inverse for the display (also happened on a friend's iPod), so I was able to set it back.
-
JSP - Encoding problem? Euro currency values display become corrupted
Hi
We are having problem on our web application when trying to displaying euro currency.
A expected string such as "229 810,00 € " is displayed as "229 810,00 €".
Note that the page encoding is UTF-8, the line "<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />" is present in the header. Manually changing encoding to UTF-8 in browser did not fix the problem.
We have also noticed that when we deploy the same application in tomcat, we do not have this problem. The Euro currency is displayed correctly.
Are we missing some settings in our WebLogic Application Server that causes this problem?
thanks
PeterAnother really strange thing happened after i did a urlrewrite!!!
here is the two link:
link1: http://www3t2.irelandin1.com/AboutIreland/Meath/index.jsp
link2: http://www3t2.irelandin1.com/about_ireland.jsp?county=Meath
Actually, link 1 will be redirected to link2. It means the actual code executed for two links are the same. And the server is the one obviously.
But, you can find the difference: B?inne shown on link2 and B�inne shown on link 1
WTXXXX
Forget �, which i am using ú
Any helps??
Thanks -
Menu/Toolbar Display Corruption Upon Resizing Window
We're experiencing an issue with one of our workstations where when the Adobe Reader X (10.1.3) window is resized, the Menu/Toolbar displays become corrupt and garbled on the screen (see the attached picture). The Toolbar appears on the top, the frame around the application disappears, and the menubar has to be hovered across for items to appear.
I have uninstalled and reinstalled Adobe Reader, updated the video card drivers, and ensured all Adobe/Microsoft updates have been applied to this workstation.
Dell Precision T3500
Intel Xeon W3530 (2.80 GHz)
6.00GB of Memory
NVIDIA Quadro FX 580
Windows 7 Ultimate x64Was curious to how you were able to change the display resolution - I am unable to even see anything on my desktop... I have connected my power book to another monitor but have the same result.
-
FC5700 VTD 256 with KT4V Corrupt Display at boot up
Hi,
I wounder if people can help.
I have just bought a FX5700VTD 256 for my system.
550 Antec TruePower
Athlon XP2200
1Gig PC2700
KT4V Mother board.
Swapped it out for an ATI9500 as I wanted the video capture.
However, on first time power up the display is corrupt and the system does boot.
I do a hard reset and everything is fine.
Latest Vid drivers, patches, etc.
Any ideas?
Thanks,
Robert NashRobertNash,
Which one is giving the corruption? The 5700 or the 9500?
You are not really clear on this. Also what happens when you put it in the other comp?
Take Care,
Richard -
Corrupted Display of Ovi Map Guides - N8
When I open any of the Online Services (city guides, Qype, weather, etc.) in Ovi maps on my N8, the information displayed is corrupted with big graphic blocks and the text formatted in odd ways. I'm on version 3.06. This was raised on another thread and solved by installing PR 1.1 but I've done this and it's not made any difference. Has anybody got another solution?
Sorry for any confusion over this, you do have the latest available version of OVI Maps installed and unfortunately don't know best way forward to resolve this issue.
Is N8 running PR1.0 or PR1.1 as might be opportunity to re-install device firmware?
Happy to have helped forum with a Support Ratio = 42.5 -
LabVIEW 7 for Linux can not display non English character
Hello,
Unsing LabVIEW 7 under SUSE Linux 10, I find that when input Chinese character to a string control , it just can displays a corrupt strings. Anyone knowing how to resolve the problem ? Thanks.
DavidHello David,
I had the same kind of trouble with polish characters... more informations on that thread :
http://forums.ni.com/ni/board/message?board.id=170&message.id=141107#M141107
Let me just point out that it did not solve all my problems but it helped me. Besides, I don't know if that will work on Linux ... Good luck
When my feet touch the ground each morning the devil thinks "bloody hell... He's up again!"
Maybe you are looking for
-
Can the iphone maps display more than one pin at the same time?
For example, on a recent trip to New York I preloaded bookmarks of all the places I wanted to visit into the iPhone Maps. I then wanted to see where they all were in relation to one another so I could decide which one to go to next (MOMA, Guggenheim,
-
How do I change a serial number for FCP Studio entered in error
I recently had to reinstall everything and I used the serial number for a co-worker's software by mistake. I have the right serial number, but when I try to re-install, the pane for entering the serial number never comes up and I end up with the same
-
Forcing odd-sized PDF into letter-sized pages
I am merging several PDF files into a single document. They were originally scanned from books, so they are all sorts of different sizes. I'd like to somehow crop the pages so they best-fit a consistent, standard letter-sized page (i.e. so each page
-
Install printer to toshiba laptop ?
install printer to toshiba laptop
-
Slide "ON" button for I Phone 4S
When I slide the button to turn on the phone; it goes to the end but does not turn on the phone . I can hear a delayed teletale "click" but the phone does not come on. If I try to shut it off; that doesn't work either. After a whille it comes back