Display iMac 27" with gray bar

Why Apple continues to deliver iMac 27 "with the defect in the gray band at the bottom of the monitor?????????
Why not try them before sending them to customers???????????

Yes, the 10,1 is a late 2009 model. If it will work depends on whether the pc graphics card will supply Mini DisplayPort compliant signals.
Here is some information on using the 27" iMac in Target Display mode:
http://support.apple.com/kb/HT3924
Hope this helps.
Message was edited by: captfred

Similar Messages

My Mac Book Pro starts up with gray bars and instructs me to restart the sy

I started having problems with my Mac Book Pro last night. It crashed, and instructed me to restart the computer. I've tried the following with the install CD inside the CD ROM Drive:
1) Restarted it with the OPTION key pressed down
2) Restarted it with the C key pressed down
3) Restarted it with the D key pressed down
The extensive Hard Drive test did not detect any problems. I cannot boot from the main HD or the Install CD. I cannot enter safe mode.
On a regular boot up the computer starts up with gray bars and the gray bars fill the screen, the spinning gear appears and more gray bars on the screen. The screen then turns black and then I get the restart message.
Any suggestions would be appreciated.

Like BSteely, I am curious as to how you ran hard drive tests if you can't boot from the Installer disc? Do you have another bootable hard drive attached?
You might want to try pulling and reseating the RAM and hard drive along with performing an SMC reset. Disconnect any external USB and FireWire devices. You're getting kernel panics during startup which usually indicate a hardware issue.
-Douggo

Display Adjustment Utility or Gray Bar test pattern, where is it?

I am trying to adjust the focus and screen voltage on an older CRT iMac. The Service manual references a "Display Adjustment Utility" in OS 9. I am not an OS9 person so I don't know how to find it. I tried help in OS9 but could not find it. What I'm looking for is a gray bar test pattern to adjust the screen voltage (make the display lighter).
Thanks,
Alfredo

Just an update... I found the utility at the following site:
http://home.earthlink.net/~strahm_s/manuals.html
Alfredo

Imac freezes with gray screen after mavericks update

I was updating my imac system and it is frozen in a gray screen, like it is restarting.
It's been twenty minutes and it didn't restarted.
What can i do if it don't restart anymore?
All my work data is on that imac.

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
     a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

No Charge? Display shows battery with 1 bar and lightning

I have had no problems since my purchase of my 4 gig nano.
I've only charged it once, waiting for the battey to fully discharge. No problem until yesterday.
Upon charging my nano (which againg was fully discharged) i plugged my nano into my Powerbook 550 via USB, to charge and create some new playlists. To my surprise itunes did not detect my ipod, and my ipod would not turn on while connected to my powerbook.
I figured the battery was not fully charged. Last night i left the nano plugged into my comp, to be charged over night. The display showed 1 bar on the battery and a lightning bolt over the display.
After 14 hours of charging overnight, the display still shows 1 bar on the battery and the lightning bolt. Now when I unplug the nano from the charger, the display shuts off and it is unable to turn on manually: pressing the select, play, holding down play, or even the reset menu + select button. All i get is the Apple screen then it goes to the batter - but only if the nano is plugged in.
I have updated my itunes, and the ipod nano drivers. I have downloaded songs onto my nano without any problems. The nano isn't detected on the system profiler also.
any help would be appreciated!
nelly

So I took my nano to the apple store. It turns out that the battery on my nano was completely discharged that the USB port on my Mac was unable to recharge it. The store tried the wall adapter to charge my nano...and wa laa! it started charging.
The store offered to replace my nano for a new one. But since the new iPod video came out, I asked for an upgrade to the new iPod.
Now I have an iPod video.
So, i guess the best way to fix a busted nano is to replace it with a new iPod.

HT4623 iphone 5 shows apple with gray bar below for over 30 minutes... itunes shows iphone is updated to iOS 7?

Tried to install ios 7 from itunes, and phone appears to be dead?

if it doesn't seem to be doing anything, or seems stuck, you'll want to restore it with itunes again using recovery mode:
http://support.apple.com/kb/HT1808

Problenm is not the gray bar, but bottom 1/3 of screen.

Problem with bottom 1/3 of screen, and not with gray bar.

Can you attach a [http://en.wikipedia.org/wiki/Screenshot screenshot]?
Use a compressed image type like PNG or JPG to save the screenshot and make sure that you do not exceed the maximum file size (200 KB) and do not click Preview after you have attached the image.
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the ''Safe mode'' start window.
You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")

IMac display problems with gray to white gradients

My early 2006 iMac 20 has problems displaying gradients going from pure white to light gray. The web colors are #000000 to #EEEEEE (RGB 238 238 238 and 255 255 255)
My cheaper Acer and Fijutsu Siemens displays can handle this very well, but my iMac cuts the gradient prematurely and makes the gray darker. It looks as if the gradient on my iMac is a dark gray bar and a white bar, instead of a smooth gradient compared on the two other monitors.
I know the iMac doesn't have the best display for a designers need, but it can't be that 'cheap' or can it? I have tried to calibrate the display with both manual expert mode and using ColorSpyder. The latter gave me a blue/magenta colormode with beige gamma each time, so I gave that up.
The frustration is that I have use my iMac as secondary display and one of the other primary. It is not the optimal arrangement for an office environment.
Does anyone have the same problem or do they have any good advice for me as of what to do?

Thanks for all the speedy replies.
Barbara:
This was reassuring news, I have been using Spyder2express with both the bundled calibration software and another professional (and high revered) software, which name is completely lost to me right now.
In both cases, with blinds shut, lights turned off and no other interference, I got a beige/dark result from both. With a bit of flicking with the settings, I managed to produce only a sick magenta result.
Your post reassures me that it can be done, so I am going to borrow the Spyder2 again and try all over, even read myself to death on the instructions once more.

Does anyone know why or what is the reason when starting a new iMac with Lion a gray bar sometimes appears when loading software?

Does anyone know why or what is the reason when starting a new iMac with Lion, sometimes a gray bar appears under the Apple that begins to shade to dark as it loads OS? It does this on occasion. One time the system loaded was VERY slow and terrible colors. Pulled the plug, re-started the computer and it did not do this. As I say, its only on occasion, not every time. I noticed in the discussion page there were problems listed for 10.6 nothing for Lion.
Please advise, if possible.

You should see this 4 option menu. Click on Disk Utility:
In Disk Utility, Select FIRST AID and then VERIFY and then REPAIR the disk.
Ciao.

My Imac is showing gray screen with red line when booting and restarts again

My Imac is showing gray screen with red line when booting and restart again, I can load it in windows 7 safe mode with red lines across the display, pls help

The graphic card is damaged. You can't do anything more than taking your computer to an Apple Store or reseller and getting your graphic card replaced.
Sometimes, when the graphic card is damaged, operating systems can't start. That's caused because the drivers that make the graphic card work detect an error, telling the operating system that the graphic card is unusable, so the operating system can't start and it restarts. However, you can start in safe mode because operating systems use a basic driver in this startup mode

When turning on my mac book pro it displays a screen with apple logo and begins loading a loading bar, after this continues to show loading circle however has been like this all day still no different. Tried turning it on and off however still same!

When turning on my mac book pro it displays a screen with apple logo and begins loading a loading bar, after this continues to show loading circle however has been like this all day still no different. Tried turning it on and off however still same!

... then run Disk Utility, Repair Disk.
Also:
Resolve startup issues and perform disk maintenance with Disk ...
Mac troubleshooting FAQ: start-up woes
How To Fix Common Mac Startup Problems
Mac Stalls on Gray Screen at Startup - Troubleshooting Mac Startup ...

Gray bar under Apple logo during startup with 10.7.2

Hi everyone,
first-time iMac owner since May 2011, I'm experiencing exactky the same problem described in the article Mac OS X v10.6: Gray progress bar appears under Apple logo during startup, but with two important differences:
it never happened with the original the 10.6 factory-installed, and started to appear after upgrading to 10.7 at the beginning of August
my iMac, included in the HD replacement program announed by Apple in July 2011, had the HD replaced with a new one in October 2011
In addition to the behavious described in the KB article, it's worth noting that, when one finally manages to log in (and the gray bar may take one good minute to disappear, which happens after filling up to approx. 60-70% of its length), the iMac is barely unusable, as the graphic interface is suddenly **** slow and there's a lot of flickering.
Since seeing is believing, please have allok at the YouTube video I made on this "false start", as I named it: see iMac_falsa_partenza / iMac_false_start.
I had already reported the problem to the local assistance, and they had told me it was an evidence of the HD problem indicated by Apple. Then they replaced the HD (...did they, actually? Probably yes, as the HD now installed is far noisier than the old one), but the very same day I brought it back from the assistance, at the second start... bam, here's the nasty gray bar again.
I didn't further report the problem to the assistance because my faith in their capability has cracked and because the simple replacement of the HD took them three full weeks. But this "false start" issue really, really bothers me a lot, as it happens every other day.
How can I have some good Apple expert technicians take this problem seriously and help me solving it?
As a first-time owner of a Mac, I have onestly to say I'm much, much disappointed by this story... Thanks anyone for any help.

If you can't eject a CD or DVD or open the drive tray
How do I eject a defective DVD?: Apple Support Communities
http://www.faqforge.com/macosx/how-to-eject-a-cd-in-a-mac-mini-with-pc-keyboard- and-mouse/

Two crashes: one OS crash with gray screen and loading bar- help? (Stuck overseas, so you guys are it!)

Hey everyone.
When firefox crashed last night, I figured it was just firefox being difficult, but when while using firefox my entire computer crashed this afternoon and rebooted with a gray screen, the spinny wait symbol, and a loading bar, I started to get concerned. After looking through console, I'm not sure what's caused it to crash like this so I'm hoping one of you bright people here can tell me what exactly happened. I'm running a mac book pro with 10.6.8, have no real addons on firefox aside from adblock plus, divx, memory restart, a french dictionary, and a skin I've been using forever and have also spoken to the developer in the past about. I'm also using Firefox 17.0.1. After trying to google some of the more unfamiliar/suspicious lines (mostly relating to launch agents), I typed into terminal the command to list all launch agents and received 3 replies naming adobe, divx, and google. I used terminal to delete them all just for safe measure (plus the adobe update window has been irritating me to no end so maybe it'll go away now, haha). I did three things when I tried to boot up again after the crash and the weird launch screen with loading bar came up: 1) I held down the power button again because a) the screen was weirding me out and b) I thought it got hung up again (bar seemed to stall for an unusually long time), 2) I tried to boot again and when the same gray screen came back I just figured I had no choice and had to sit through it. 3) when the bar was at about half way I pulled out my ethernet cord for safe measure in case something shady was going on. These three things are also reflected in the log below.
I currently live overseas and the nearest Apple store is over two hours away with no guarantee of a native english speaker working, so if anyone can let me know what caused the crash and if there's anything I can do about it, I would be extremely grateful. The following is my current console log in its entirety from today, including my attempted system update to see if that would improve things (which also resulted in a gray screen with loading bar later), and a really weird bit at the end that is also confusing (but possibly caused by me tinkering in terminal- not sure).
NAME is replacing my HD name, and my screen name here (caithris) has replaced my computer user name. NUMBER has replaced anything that looks like a serial number of some kind.
Thanks so much ahead of time-- please let me know if there's anything else I can share.
Mar 31 00:30:01 NAME newsyslog[9228]: logfile turned over
Mar 31 01:03:25 NAME firefox[8993]: Mozilla has caught an Obj-C exception [NSRangeException: *** -[NSCFArray objectAtIndex:]: index (1) beyond bounds (1)]
Mar 31 01:03:25 NAME [0x0-0x10010].org.mozilla.firefox[0]: 2013-03-31 01:03:25.193 firefox[8993:903] Mozilla has caught an Obj-C exception [NSRangeException: *** -[NSCFArray objectAtIndex:]: index (1) beyond bounds (1)]
Mar 31 01:04:06 NAME [0x0-0x10010].org.mozilla.firefox[0]: pure virtual method called
Mar 31 01:04:06 NAME [0x0-0x10010].org.mozilla.firefox[0]: terminate called without an active exception
Mar 31 01:04:20 NAME ReportCrash[9260]: Saved crash report for firefox[8993] version 17.0.1 (1712.11.28) to /Users/Caithris/Library/Logs/DiagnosticReports/firefox_2013-03-31-010420_NAME.c rash
Mar 31 01:05:35 NAME SubmitDiagInfo[9280]: Submitted crash report: /Users/Caithris/Library/Logs/DiagnosticReports/firefox_2013-03-31-010420_NAME.c rash
Mar 31 03:00:27 NAME loginwindow[31]: loginwindow SleepWakeCallback WILL sleep
Mar 31 03:00:28 NAME configd[13]: PMConnection IPConfiguration com.apple.powermanagement.applicationresponse.slowresponse 1120 ms
Mar 31 11:22:53 NAME configd[13]: Sleep: Success - AC 97 - Idle Sleep
Mar 31 11:22:53 NAME configd[13]: Wake: Success - AC 97 - OHC2
Mar 31 11:22:53 NAME configd[13]: Hibernate Statistics
Mar 31 11:22:53 NAME loginwindow[31]: loginwindow SleepWakeCallback will power on, Currenttime:3/31/2013 11:22:53.195 AM - Waketime:3/31/2013 11:22:43.930 AM = Deltatime:9.265338957
Mar 31 11:22:53 NAME loginwindow[31]: askForPasswordBuiltIn after makekey, Currenttime:3/31/2013 11:22:53.212 AM - Waketime:3/31/2013 11:22:43.930 AM = Deltatime:9.281565964
Mar 31 11:22:53 NAME loginwindow[31]: builtInAuthWindowBecameKey, Currenttime:3/31/2013 11:22:53.243 AM - Waketime:3/31/2013 11:22:43.930 AM = Deltatime:9.312892973
Mar 31 11:22:53 NAME configd[13]: network configuration changed.
Mar 31 11:22:54 NAME configd[13]: PMConnection AirPort configd plug-in com.apple.powermanagement.applicationresponse.slowresponse 9839 ms
Mar 31 11:22:54 NAME configd[13]: PMConnection IPConfiguration com.apple.powermanagement.applicationresponse.slowresponse 9849 ms
Mar 31 11:22:57 NAME configd[13]: network configuration changed.
Mar 31 11:22:57 NAME ntpd[20]: sendto(17.171.4.13) (fd=24): Network is unreachable
Mar 31 11:23:02 NAME loginwindow[31]: in pam_sm_authenticate(): Failed to determine Kerberos principal name.
Mar 31 11:23:02 NAME loginwindow[31]: builtInAuthWindowDidResignKey
Mar 31 11:23:02 NAME loginwindow[31]: handleUnlockResult, Currenttime:3/31/2013 11:23:02.536 AM - Waketime:3/31/2013 11:22:43.930 AM = Deltatime:18.606058955
Mar 31 11:23:32 NAME loginwindow[31]: no spins reported for this wake
Mar 31 11:27:31 NAME SubmitDiagInfo[9444]: Cleaning up expired diagnostic messages database at path: /var/log/DiagnosticMessages/2013.03.01.asl
Mar 31 11:33:29 NAME [0x0-0x3b63b6].org.mozilla.firefox[9264]: NOTE: child process received `Goodbye', closing down
Mar 31 11:36:14 NAME ntpd[20]: time reset -4.060579 s
Mar 31 12:11:05 NAME firefox[9264]: -deltaZ is deprecated for NSEventTypeMagnify. Please use -magnification.
Mar 31 15:19:22 NAME kernel[0]:
Mar 31 15:28:23 NAME kernel[0]:
Mar 31 15:28:53: --- last message repeated 7 times ---
Mar 31 15:28:23 NAME kernel[0]:
Mar 31 15:30:22 NAME kernel[0]:
Mar 31 15:56:08 NAME kernel[0]:
Mar 31 15:56:13: --- last message repeated 1 time ---
Mar 31 15:56:13 NAME loginwindow[31]: in pam_sm_authenticate(): Failed to determine Kerberos principal name.
Mar 31 15:56:16 NAME kernel[0]:
Mar 31 15:56:46: --- last message repeated 8 times ---
Mar 31 16:00:10 NAME kernel[0]:
Mar 31 16:00:40: --- last message repeated 3 times ---
Mar 31 16:00:44 NAME kernel[0]:
Mar 31 16:01:14: --- last message repeated 5 times ---
Mar 31 16:02:36 NAME kernel[0]:
Mar 31 16:03:06: --- last message repeated 9 times ---
Mar 31 16:03:22 NAME kernel[0]:
Mar 31 16:10:31 localhost com.apple.launchd[1]: *** launchd[1] has started up. ***
Mar 31 16:17:50 localhost DirectoryService[15]: Improper shutdown detected
Mar 31 16:17:54 localhost fseventsd[33]: event logs in /.fseventsd out of sync with volume. destroying old logs. (707133 444 707763)
Mar 31 16:17:54 localhost bootlog[41]: BOOT_TIME: 1364713830 0
Mar 31 16:17:58 localhost fseventsd[33]: log dir: /.fseventsd getting new uuid: NUMBER
Mar 31 16:17:58 localhost blued[42]: Apple Bluetooth daemon started
Mar 31 16:18:02 localhost mDNSResponder[28]: mDNSResponder mDNSResponder-258.21 (May 26 2011 14:40:13) starting
Mar 31 16:18:03 localhost com.apple.usbmuxd[21]: usbmuxd-296.4 on Dec 21 2012 at 16:11:14, running 64 bit
Mar 31 16:18:04 localhost configd[13]: bootp_session_transmit: bpf_write(en1) failed: Network is down (50)
Mar 31 16:18:04 localhost configd[13]: DHCP en1: INIT transmit failed
Mar 31 16:18:04 localhost configd[13]: network configuration changed.
Mar 31 16:18:04 NAME configd[13]: setting hostname to "NAME.local"
Mar 31 16:18:04 NAME /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[29]: Login Window Application Started
Mar 31 16:18:04 NAME configd[13]: network configuration changed.
Mar 31 16:18:04 NAME mDNSResponder[28]: mDNSPlatformSetDNSConfig: Error: dns_configuration_copy returned NULL
Mar 31 16:18:04 NAME configd[13]: network configuration changed.
Mar 31 16:18:11 NAME mds[27]: (Normal) DiskStore: Creating index for /
Mar 31 16:18:17 NAME loginwindow[29]: Login Window Started Security Agent
Mar 31 16:18:18 NAME WindowServer[71]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Mar 31 16:18:18 NAME com.apple.WindowServer[71]: Sun Mar 31 16:18:18 NAME.local WindowServer[71] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Mar 31 16:18:29 NAME SecurityAgent[92]: NSSecureTextFieldCell detected a field editor ((null)) that is not a NSTextView subclass designed to work with the cell. Ignoring...
Mar 31 16:18:30 NAME loginwindow[29]: Login Window - Returned from Security Agent
Mar 31 16:18:30 NAME loginwindow[29]: USER_PROCESS: 29 console
Mar 31 16:18:30 NAME com.apple.launchd.peruser.501[96] (com.divx.agent.postinstall): Unknown key: LimitToSessionType
Mar 31 16:18:30 NAME com.apple.launchd.peruser.501[96] (com.apple.ReportCrash): Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
Mar 31 16:18:36 NAME root[113]: /usr/libexec/ntpd-wrapper: scutil key State:/Network/Global/DNS not present after 30 seconds
Mar 31 16:18:37 NAME root[130]: sntp options: a=2 v=1 e=0.100 E=5.000 P=2147483647.000
Mar 31 16:18:37 NAME root[130]: d=15 c=5 x=0 op=1 l=/var/run/sntp.pid f= time.apple.com
Mar 31 16:18:37 NAME root[130]: sntp: getaddrinfo(hostname, ntp) failed with nodename nor servname provided, or not known
Mar 31 16:18:38 NAME-2 com.apple.launchd.peruser.501[96] (com.apple.mrt.uiagent[123]): Exited with exit code: 255
Mar 31 16:18:38 NAME-2 com.apple.launchd.peruser.501[96] (com.apple.Kerberos.renew.plist[124]): Exited with exit code: 1
Mar 31 16:19:55 NAME-2 XProtectUpdater[19]: NSURLConnection error: Error Domain=NSURLErrorDomain Code=-1009 UserInfo=0x100174890 "This computer’s Internet connection appears to be offline." Underlying Error=(Error Domain=kCFErrorDomainCFNetwork Code=-1009 UserInfo=0x1001744e0 "This computer’s Internet connection appears to be offline.")
Mar 31 16:19:55 NAME com.apple.launchd[1] (com.apple.xprotectupdater[19]): Exited with exit code: 255
Mar 31 16:22:04 NAME kextd[10]: updated kernel boot caches
Mar 31 16:25:04 NAME Software Update[178]: SWU: scan found 0 products:
Mar 31 16:25:05 NAME Software Update[178]: Error Domain=NSURLErrorDomain Code=-1009 UserInfo=0x10052e600 "This computer’s Internet connection appears to be offline." Underlying Error=(Error Domain=kCFErrorDomainCFNetwork Code=-1009 UserInfo=0x10052f760 "This computer’s Internet connection appears to be offline.")
Mar 31 16:25:14 NAME com.apple.launchd[1] (com.apple.suhelperd[181]): Exited with exit code: 2
Mar 31 16:25:18 NAME configd[13]: network configuration changed.
Mar 31 16:26:17 NAME Software Update[188]: SWU: scan found 1 products:\n041-9605
Mar 31 16:26:30 NAME ntpd[18]: time reset +1.140167 s
Mar 31 16:26:57 NAME com.apple.launchd[1] (com.apple.suhelperd[190]): Exited with exit code: 2
Mar 31 16:26:57 NAME com.apple.launchd.peruser.501[96] ([0x0-0xf00f].com.apple.Console[142]): Exited: Killed
Mar 31 16:26:57 NAME com.apple.launchd.peruser.501[96] ([0x0-0x15015].com.apple.SoftwareUpdate[188]): Exited: Killed
Mar 31 16:26:57 NAME com.apple.launchd.peruser.501[96] (com.apple.AirPortBaseStationAgent[126]): Exited: Killed
Mar 31 16:26:57 NAME loginwindow[29]: DEAD_PROCESS: 29 console
Mar 31 16:26:57 NAME /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[200]: Login Window Application Started
Mar 31 16:26:58 NAME loginwindow[200]: USER_PROCESS: 200 console
Mar 31 16:26:58 NAME WindowServer[203]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Mar 31 16:26:58 NAME com.apple.WindowServer[203]: Sun Mar 31 16:26:58 NAME.local WindowServer[203] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Mar 31 16:26:59 NAME Software Update[209]: Looking for products to install
Mar 31 16:27:02 NAME Software Update[209]: Performing preflight
Mar 31 16:27:02 NAME Software Update[209]: Preparing session
Mar 31 16:27:02 NAME Software Update[209]: Starting session
Mar 31 16:27:03 NAME Software Update[209]: PKG: extracting "com.apple.pkg.MacBookProSMCUpdate"
Mar 31 16:27:03 NAME Software Update[209]: PKG: pre-flight scripts for "com.apple.pkg.MacBookProSMCUpdate"
Mar 31 16:27:03 NAME Software Update[209]: PKG: pre-install scripts for "com.apple.pkg.MacBookProSMCUpdate"
Mar 31 16:27:16 NAME Software Update[209]: REQ: moving files into place with shove
Mar 31 16:27:17 NAME Software Update[209]: PKG: post-install scripts for "com.apple.pkg.MacBookProSMCUpdate"
Mar 31 16:27:17 NAME Software Update[209]: PKG: post-flight scripts for "com.apple.pkg.MacBookProSMCUpdate"
Mar 31 16:27:17 NAME Software Update[209]: PKG: writing receipt for "com.apple.pkg.MacBookProSMCUpdate"
Mar 31 16:27:17 NAME Software Update[209]: REQ: install succeeded
Mar 31 16:27:18 NAME Software Update[209]: SWU: installing "MacBook Pro SMC Firmware Update, 1.6"
Mar 31 16:27:20 NAME [0x0-0x1a01a].com.apple.SoftwareUpdate[209]: /: no supported helper partitions to update.
Mar 31 16:27:20 NAME kextd[10]: updated kernel boot caches
Mar 31 16:27:20 NAME Software Update[209]: kextcache returned 0
Mar 31 16:27:20 NAME Software Update[209]: Running /sbin/reboot
Mar 31 16:27:20 NAME reboot[242]: rebooted by Caithris
Mar 31 16:27:20 NAME reboot[242]: BOOT_TIME: 1364714840 524942
Mar 31 16:27:20 NAME mDNSResponder[28]: mDNSResponder mDNSResponder-258.21 (May 26 2011 14:40:13) stopping
Mar 31 16:27:20 NAME DirectoryService[15]: BUG in libdispatch: 10K549 - 1960 - 0x10004004
Mar 31 16:27:20 NAME WindowServer[203]: hidd died. Reestablishing connection.
Mar 31 16:27:20 NAME WindowServer[203]: Unable to create event queue via hidd: (0x10000003)
Mar 31 16:28:03 localhost com.apple.launchd[1]: *** launchd[1] has started up. ***
Mar 31 16:29:52 localhost bootlog[47]: BOOT_TIME: 1364714882 0
Mar 31 16:29:53 localhost mDNSResponder[34]: mDNSResponder mDNSResponder-258.21 (May 26 2011 14:40:13) starting
Mar 31 16:29:54 localhost configd[13]: network configuration changed.
Mar 31 16:29:54 NAME configd[13]: setting hostname to "NAME.local"
Mar 31 16:29:54 NAME com.apple.usbmuxd[27]: usbmuxd-296.4 on Dec 21 2012 at 16:11:14, running 64 bit
Mar 31 16:29:56 NAME blued[17]: Apple Bluetooth daemon started
Mar 31 16:29:57 NAME /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[35]: Login Window Application Started
Mar 31 16:29:59 NAME configd[13]: network configuration changed.
Mar 31 16:30:12: --- last message repeated 2 times ---
Mar 31 16:30:12 NAME ntpd[24]: time reset +0.227711 s
Mar 31 16:30:13 NAME loginwindow[35]: Login Window Started Security Agent
Mar 31 16:30:14 NAME WindowServer[61]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Mar 31 16:30:14 NAME com.apple.WindowServer[61]: Sun Mar 31 16:30:14 NAME.local WindowServer[61] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Mar 31 16:30:21 NAME SecurityAgent[96]: NSSecureTextFieldCell detected a field editor ((null)) that is not a NSTextView subclass designed to work with the cell. Ignoring...
Mar 31 16:30:22 NAME loginwindow[35]: Login Window - Returned from Security Agent
Mar 31 16:30:22 NAME loginwindow[35]: USER_PROCESS: 35 console
Mar 31 16:30:22 NAME com.apple.launchd.peruser.501[99] (com.divx.agent.postinstall): Unknown key: LimitToSessionType
Mar 31 16:30:22 NAME com.apple.launchd.peruser.501[99] (com.apple.ReportCrash): Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
Mar 31 16:30:32 NAME com.apple.launchd.peruser.501[99] (com.apple.mrt.uiagent[124]): Exited with exit code: 255
Mar 31 16:30:35 NAME com.apple.launchd.peruser.501[99] (com.apple.Kerberos.renew.plist[125]): Exited with exit code: 1
Mar 31 16:30:47 NAME mdworker[81]: (Error) SyncInfo: Catalog changed during searchfs too many times -- falling back to fsw search /
Mar 31 16:36:05 NAME mdworker32[158]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Mar 31 16:36:22 NAME mdworker32[161]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Mar 31 16:36:29 NAME [0x0-0x10010].org.mozilla.firefox[149]: NOTE: child process received `Goodbye', closing down
Mar 31 16:39:07 NAME mdworker[157]: Warning: unknown JFIF revision number 0.01
Mar 31 16:39:22 NAME login[182]: USER_PROCESS: 182 ttys000
Mar 31 16:40:34 NAME /System/Library/CoreServices/CCacheServer.app/Contents/MacOS/CCacheServer[132]: No valid tickets, timing out
Mar 31 16:40:35 NAME mdworker[157]: Error, could not create MachMessagePort for com.apple.AddressBook.abd
Mar 31 16:40:37 NAME mdworker[157]: Unable to parse date (<XHTML-STRIPONREPLY>
</XHTML-STRIPONREPLY>)
Mar 31 16:40:38 NAME mdworker[157]: Unable to parse date ( S<XHTML-STRIPONREPLY>
</XHTML-STRIPONREPLY>him to any)
Mar 31 16:40:41: --- last message repeated 1 time ---
Mar 31 16:40:41 NAME mdworker[157]: Invalid char \n for PropertyName in line 1
Mar 31 16:40:41 NAME mdworker[157]: Invalid char \n for PropertyName in line 2
Mar 31 16:40:41 NAME mdworker[157]: Invalid char \n for PropertyName in line 3
Mar 31 16:40:41 NAME mdworker[157]: Invalid char \n for PropertyName in line 4
Mar 31 16:40:41 NAME mdworker[157]: Invalid char \n for PropertyName in line 5
Mar 31 16:40:41 NAME mdworker[157]: Invalid char \n for PropertyName in line 6
Mar 31 16:40:41 NAME mdworker[157]: Invalid char \n for PropertyName in line 7
Mar 31 16:40:41 NAME mdworker[157]: Invalid char \n for PropertyName in line 8
Mar 31 16:40:41 NAME mdworker[157]: Invalid char \n for PropertyName in line 9
Mar 31 16:40:41 NAME mdworker[157]: Invalid char \n for PropertyName in line 10
Mar 31 16:40:41 NAME mdworker[157]: Invalid char \n for PropertyName in line 11
Mar 31 16:40:41 NAME mdworker[157]: Invalid char \n for PropertyName in line 12
Mar 31 16:40:41 NAME mdworker[157]: Invalid char \n for PropertyName in line 13
Mar 31 16:40:41 NAME mdworker[157]: Invalid char \n for PropertyName in line 14
Mar 31 16:40:41 NAME mdworker[157]: Invalid char \n for PropertyName in line 15
Mar 31 16:40:41 NAME mdworker[157]: Invalid char \n for PropertyName in line 16
Mar 31 16:40:41 NAME mdworker[157]: Invalid char \n for PropertyName in line 17
Mar 31 16:40:41 NAME mdworker[157]: Invalid char \n for PropertyName in line 18
Mar 31 16:40:41 NAME mdworker[157]: Invalid char \n for PropertyName in line 19
Mar 31 16:40:41 NAME mdworker[157]: Invalid char \n for PropertyName in line 20
Mar 31 16:40:41 NAME mdworker[157]: Invalid char \n for PropertyName in line 21
Mar 31 16:40:41 NAME mdworker[157]: Invalid char \n for PropertyName in line 22
Mar 31 16:40:41 NAME mdworker[157]: Invalid char \n for PropertyName in line 23
Mar 31 16:40:41 NAME mdworker[157]: Invalid char \n for PropertyName in line 24
Mar 31 16:40:41 NAME mdworker[157]: Invalid char \n for PropertyName in line 25
Mar 31 16:40:41 NAME mdworker[157]: Invalid char \n for PropertyName in line 26
Mar 31 16:40:41 NAME mdworker[157]: Invalid char ^M for PropertyName in line 26
Mar 31 16:40:41 NAME mdworker[157]: Invalid char \n for PropertyName in line 26
Mar 31 16:40:41 NAME mdworker[157]: Invalid char ^M for PropertyName in line 26
Mar 31 16:40:41 NAME mdworker[157]: Invalid char \n for PropertyName in line 26
Mar 31 16:40:43 NAME mdworker[157]: Invalid char \n for PropertyName in line 1
Mar 31 16:40:43 NAME mdworker[157]: Invalid char \n for PropertyName in line 2
Mar 31 16:40:43 NAME mdworker[157]: Invalid char \n for PropertyName in line 3
Mar 31 16:40:43 NAME mdworker[157]: Invalid char \n for PropertyName in line 4
Mar 31 16:40:43 NAME mdworker[157]: Invalid char \n for PropertyName in line 5
Mar 31 16:40:43 NAME mdworker[157]: Invalid char \n for PropertyName in line 6
Mar 31 16:40:43 NAME mdworker[157]: Invalid char \n for PropertyName in line 7
Mar 31 16:40:43 NAME mdworker[157]: Invalid char \n for PropertyName in line 8
Mar 31 16:40:43 NAME mdworker[157]: Invalid char \n for PropertyName in line 9
Mar 31 16:40:43 NAME mdworker[157]: Invalid char \n for PropertyName in line 10
Mar 31 16:40:43 NAME mdworker[157]: Invalid char \n for PropertyName in line 11
Mar 31 16:40:43 NAME mdworker[157]: Invalid char \n for PropertyName in line 12
Mar 31 16:40:43 NAME mdworker[157]: Invalid char \n for PropertyName in line 13
Mar 31 16:40:43 NAME mdworker[157]: Invalid char \n for PropertyName in line 14
Mar 31 16:40:43 NAME mdworker[157]: Invalid char \n for PropertyName in line 15
Mar 31 16:40:43 NAME mdworker[157]: Invalid char \n for PropertyName in line 16
Mar 31 16:40:43 NAME mdworker[157]: Invalid char \n for PropertyName in line 17
Mar 31 16:40:43 NAME mdworker[157]: Invalid char \n for PropertyName in line 18
Mar 31 16:40:43 NAME mdworker[157]: Invalid char \n for PropertyName in line 19
Mar 31 16:40:43 NAME mdworker[157]: Invalid char \n for PropertyName in line 20
Mar 31 16:40:43 NAME mdworker[157]: Invalid char \n for PropertyName in line 21
Mar 31 16:40:43 NAME mdworker[157]: Invalid char \n for PropertyName in line 22
Mar 31 16:40:43 NAME mdworker[157]: Invalid char \n for PropertyName in line 23
Mar 31 16:40:43 NAME mdworker[157]: Invalid char \n for PropertyName in line 24
Mar 31 16:40:43 NAME mdworker[157]: Invalid char \n for PropertyName in line 25
Mar 31 16:40:43 NAME mdworker[157]: Invalid char \n for PropertyName in line 26
Mar 31 16:40:43 NAME mdworker[157]: Invalid char ^M for PropertyName in line 26
Mar 31 16:40:43 NAME mdworker[157]: Invalid char \n for PropertyName in line 26
Mar 31 16:40:43 NAME mdworker[157]: Invalid char ^M for PropertyName in line 26
Mar 31 16:40:43 NAME mdworker[157]: Invalid char \n for PropertyName in line 26
Mar 31 16:40:43 NAME mdworker[157]: Invalid char ^M for PropertyName in line 26
Mar 31 16:40:43 NAME mdworker[157]: Invalid char \n for PropertyName in line 26
Mar 31 16:41:27 NAME mdworker[157]: Corrupt JPEG data: 1 extraneous bytes before marker 0xd9
Mar 31 16:41:27 NAME mdworker[157]: JPEG datastream contains no image
Mar 31 16:41:33: --- last message repeated 1 time ---
Mar 31 16:41:33 NAME login[182]: DEAD_PROCESS: 182 ttys000
Mar 31 16:41:50 NAME mdworker[156]: iCal.mdimporter: could not parse ICS file: /Applications/Microsoft Office 2011/Office/OutlookCore.framework/Versions/14/Resources/en.lproj/Timezones.ics
Mar 31 16:41:51 NAME mdworker32[204]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Mar 31 16:43:41 NAME [0x0-0x10010].org.mozilla.firefox[149]: NOTE: child process received `Goodbye', closing down
Mar 31 17:07:10 NAME firefox[149]: -deltaZ is deprecated for NSEventTypeMagnify. Please use -magnification.
Thanks again- I mean it. It's lousy being stuck away from home when crazy thing happen to your main line of communication!
-Caithris

The gray screen with loading bar issue is a at boot fsck (file system check) that has discovered something wrong with your boot drive/partition and was attempting to fix it.
OS X is booting but can't complete, so that means your hard drive is good, just likely has been either subjected to shock which damaged data on the platters, or bad sectors (the drive is dying if after fixing it, problems occurs again), or something messed something up in the file structure.
Firefox is currently at 19.02, so it appears your background auto-update has not been occurring, which makes me suspect the machine's data is broken in some manner or you have malware on the machine blocking the updates.
Your problems are multiple, in your case I advise a complete erase and install.
1: If you have a backup of your user data on a external storage drive (not TimeMachine as it might be corrupted and compromised with malware it's just going to restore back) then your good, else you have to do this.
Create a data recovery/undelete external boot drive
Copy your data to a blank plain jane external storage drive as you want no executable files on it when you connect to the cleaned machine later.
2: Once your data is safely copied (copy visible files manually and what you know is good, not folders that can contain invisible malware programs!) then disconnect the drive(s)
3: Next assume all writeable media is contaminated with malware and treat as so. Even if you erased it.
4: Stick in your 10.6 install disk and reboot holding the c or option key down. You want Disk Utility and you want to select the ENTIRE internal drive and MUST USE the Security Option > Zero All Data (unless your in the military then use 7x erase, do not use 35x as it will take weeks and is unnecessary)
The Zero/7x erase will do two things, do a low level format and erradicate everything (including hidden stuff and deleted files) also will map off any failing sectors on the hard drive.
5: Follow the procedure here to install 10.6
How to erase and install Snow Leopard 10.6
6: Reboot the machine twice, then once you set up the machine (using a alias of course and not allowing registration), use a secured network and IMMEDIATLY Software update to 10.6.8, if you can download the 10.6.8 Combo update on another secure machine to a (new) USB thumb drive and install it on the clean Mac, do that instead.
WiFi security issues, at home and WiFi hotspots
https://support.apple.com/kb/DL1399
Still run Software update afterwards as Apple might not have fully updated the combo update yet.
7: Once you machine is secure, download the free ClamXav and run a scan on the external storage drive with just your files, perhaps one or more PDF's or other files are not what they seem to be.
8: Make sure to install fresh copies of software from original sources and not from rewriteable media, update them to be current. Malware can be hidden in copies of programs.
9: Trash all your rewritable media, or use a Linux PC or Linux Mint in a virtual machine (VirtualBox) on another computer like Windows to scrub and reformat all the rewritable media before attaching them to the clean Mac. You have to make sure it's getting the entire media.
10: Once your machine is set back up, then make clones and time and date them.
Most commonly used backup methods
If your still having problems with the machine, it's likley a failing hard drive and you will have to replace it and repeat the steps above pretty much.
Really it's best to replace the drive in the interest of security.
Install/upgrade RAM or storage drive in Mac's
For performance of Snow Leopard, check out this tip
For Snow Leopard Speed Freaks
Your overseas, if your in a foriegn country you have to assume FinSpy is being installed on your machine (uses a older iTunes verison "update" to get on) or there is other tricks via the ISP to install something on your machine. So mix things up and don't stick any old USB you see laying around into your Mac.
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents#/

How can I get a video signal using IMAC 27 with only mini display port. I like to send the signal wireless to a TV using a TV/audio transmit system.

I have an IMAC 27 with a mini display port ( only this). I also have all the adapters ( mini display port to VGA, HDMI...).
Since I moved to UAE I like to transmit the signal frm my IMAC ( where I also look German TV on) to my TV. I will do so by using a wireless Transmit receive system with theree cinch inputs ( transmit system ( video, 2x voice).
The distance to the TV IS ABOUT 10m and one wall. I don`t want to use a cable.
Is there any solution for example mini display to VGA + VGA adapter to cinch so I can use the transmit system?
HDMI would also be an optiekn, bat then I have to by another Transmit receive system.
If somebody made already the experience I would appreciate to share the information
Is there may be any store in UAE where to get support. It is very diificult to get good advice here. They sell everything bat can not reaaly explain and have very often no technical knowledge. With this problem nobody until now can help me.
Hans
<Email Edited by Host>

I don't know what AppleTV can handle as far as bit rate is concerned, but increase the bit rate as high as it will let you. You are taking DV which is 25Mb/s and compressing it. If you're making an H.264, you should get great results needing no more than 6Mb/s. Bear in mind, the higher the bit rate, the larger the file size.

How do I turn off the auto-scrolling Icon (gray bar with arrow at top and bottom)

When reading and scrolling this gray bar with arrows on top and bottom shows uunder my curser, the next thing I know I am at the bottom of the page, it is driving me nuts please help. Playing games is almost impossible. Hate it.

What mouse/drivers do you have? and what browser are you using?
laptops- ex satillite l755-s5353 inspiron e1505 desktop dimension 400/300

Display iMac 27" with gray bar

Similar Messages

Maybe you are looking for