Display in Black after a bunch of update

Hi,
I just did a bunch of update (10.6.8 combo V1.1...Pro stuffs and so on...). Update successfully but when restart, it just a black display on my cinema display! No matter how I Force Shut Down and re-boot, but still the same! Hard disk is working and restart sound from the machine is just fine, but nothing display on cinema.
What happened to it?
Help!

When you change something on your computer, and then it stops working, the most likely problem is not CAUSED BY the changes you made, it IS the changes you made.
So you need to do a few things.
If you can, boot to the Installer/Utilities DVD, either the latest "Full Retail" (not for a different-model Mac) you have or the one that came with your Mac.
"A Mac that cannot boot to an appropriate system DVD had a Hardware problem."
Answer only the "What Language" question and DO NOT press continue. WAIT for the MenuBar to be drawn (a quarter minute) and choose Disk Utility from the Utilities menu.
Select your regualr boot drive. Check the SMART status for "Verified".
Click ( REPAIR Disk ) NOT just repair permissions.
If you get errors that cannot be repaired, write them down and post them here.
Do not change Graphics cards or any other Hardware until you resolve this problem, or your problems will compound and get out of control (and very expensive to fix).

Similar Messages

Mac Pro display remains black after start up.

My 2008 Mac Pro display remains black after start up. It is plugged in properly and the light comes on, but the screen stays black. It first started doing this about a week ago, but after a manual restart or two, it would start up properly with the display working. Today the display has remained black every time I've tried to start up. Any suggestions for troubleshooting would be greatly appreciated! Thanks!

Safe Mode uses a very simple way of talking to the screen -- it does not even load the screen driver, and it uses a very common low resolution.
If it does not work that way, it simply does not work. You need a replacement graphics card.
User Tip: Mac Pro silver tower (2006-2012) Replacement Graphics cards

10.9.3 - Display is black after waking up from sleep

I have a Retina MacBook Pro that I connect to two monitors at work in clamshell mode, 1 via HDMI and 1 via the MiniDP -> DVI adapter. Typically, before leaving work I put the machine to sleep manually before unplugging everything.
Since upgrading to 10.9.3, almost everytime I open the lid of my MacBook, the display is black and will never initialize. It's not off as I can see that the backlight is lit. I can't find any key combination that does anything other than just holding down the power button.
This is a serious issue as it essentially prevents me from being able to continue any work from my desk to home.
I've done the usual, cleared SMC, PRAM.
Below are the logs prior to waking up the machine. It seems that it attempted to wake-up some 10 minutes before I opened the lid and didn't find any displays. It then goes into this weird mode.
The 4:28 event is the "wake up" while it was still in my bag.
At 4:41 is me actually opening the lid and getting the black screen.
Any advice? This did not happen in 10.9.2, even once.
5/21/14 4:28:35.000 PM kernel[0]: AirPort_Brcm43xx::powerChange: System Wake - Full Wake/ Dark Wake / Maintenance wake
5/21/14 4:28:35.000 PM kernel[0]: Previous Sleep Cause: 5
5/21/14 4:28:35.000 PM kernel[0]: AppleThunderboltNHI::prePCIWake - power up complete - took 0 us
5/21/14 4:28:35.000 PM kernel[0]: IOPPF: Sent gpu-external-plimit-notification last value 0 (rounded time weighted average 0)
5/21/14 4:28:35.000 PM kernel[0]: IOPPF: Sent gpu-internal-plimit-notification last value 0 (rounded time weighted average 0)
5/21/14 4:28:35.000 PM kernel[0]: AppleThunderboltHAL::earlyWake - complete - took 1 milliseconds
5/21/14 4:28:35.000 PM kernel[0]: Thunderbolt Self-Reset Count = 0xedefbe00
5/21/14 4:28:35.000 PM kernel[0]: IOThunderboltSwitch<0xffffff802fed0e00>(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 11 unplug = 0
5/21/14 4:28:35.000 PM kernel[0]: TBT W (2): 0x0100 [x]
5/21/14 4:28:35.000 PM kernel[0]: IOThunderboltSwitch<0xffffff802fed0e00>(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 12 unplug = 0
5/21/14 4:28:35.000 PM kernel[0]: en0: 802.11d country code set to 'X0'.
5/21/14 4:28:35.000 PM kernel[0]: en0: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
5/21/14 4:28:35.000 PM kernel[0]: AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitialized
5/21/14 4:28:35.427 PM hidd[68]: MultitouchHID: device bootloaded
5/21/14 4:28:35.932 PM UserEventAgent[11]: Captive: CNPluginHandler en0: Inactive
5/21/14 4:28:35.933 PM configd[18]: network changed: v4(en0-:10.40.3.117) DNS- Proxy- SMB-
5/21/14 4:28:35.933 PM vmnet-bridge[897]: Dynamic store changed
5/21/14 4:28:35.934 PM vmnet-bridge[897]: Failed to read SCproperties for key: State:/Network/Global/IPv4
5/21/14 4:28:35.000 PM kernel[0]: vmnet: VMNetDisconnect called for port 0xffffff80472b8a00
5/21/14 4:28:35.000 PM kernel[0]: vmnet: bridge-en0: filter detached
5/21/14 4:28:35.000 PM kernel[0]: vmnet: bridge-en0: down
5/21/14 4:28:35.000 PM kernel[0]: vmnet: bridge-en0: detached
5/21/14 4:28:35.000 PM kernel[0]: vmnet: Freeing hub at 0xffffff8036465000.
5/21/14 4:28:35.934 PM vmnet-bridge[897]: Stopping bridge for: en0
5/21/14 4:28:35.941 PM netbiosd[14396]: network_reachability_changed : network is not reachable, netbiosd is shutting down
5/21/14 4:28:35.974 PM WindowServer[86]: _CGXHWCaptureWindowList: No capable active display found.
5/21/14 4:28:36.004 PM WindowServer[86]: _CGXHWCaptureWindowList: No capable active display found.
5/21/14 4:28:36.000 PM kernel[0]: en0: 802.11d country code set to 'US'.
5/21/14 4:28:36.000 PM kernel[0]: en0: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
5/21/14 4:28:36.000 PM kernel[0]: vmnet: VMNetSetopt: Set link state DOWN
5/21/14 4:28:36.000 PM kernel[0]: vmnet: VMNetSetopt: Set link state UP
5/21/14 4:28:37.000 PM kernel[0]: AirPort_Brcm43xx::powerChange: System Sleep
5/21/14 4:28:37.000 PM kernel[0]: hibernate image path: /var/vm/sleepimage
5/21/14 4:28:37.000 PM kernel[0]: efi pagecount 63
5/21/14 4:28:37.000 PM kernel[0]: hibernate_page_list_setall(preflight 1) start 0xffffff825350a000, 0xffffff8253a1e000
5/21/14 4:28:37.000 PM kernel[0]: hibernate_page_list_setall time: 443 ms
5/21/14 4:28:37.000 PM kernel[0]: pages 2941765, wire 533839, act 1370647, inact 20672, cleaned 0 spec 4060, zf 242088, throt 0, compr 217633, xpmapped 81119
5/21/14 4:28:37.000 PM kernel[0]: could discard act 93909 inact 189335 purgeable 46214 spec 223368 cleaned 0
5/21/14 4:28:37.000 PM kernel[0]: hibernate_page_list_setall preflight pageCount 533839 est comp 46 setfile 1088506560 min 1073741824
5/21/14 4:28:37.000 PM kernel[0]: VNOP_ALLOCATE(0) 14766080
5/21/14 4:28:37.000 PM kernel[0]: [0x376c8fb000, 0x19000000]
5/21/14 4:28:37.000 PM kernel[0]: [0x37bc8b4000, 0x27e15000]
5/21/14 4:28:37.000 PM kernel[0]: [0x0, 0x0]
5/21/14 4:28:37.000 PM kernel[0]: kern_open_file_for_direct_io(0) took 0 ms
5/21/14 4:28:37.000 PM kernel[0]: Opened file /var/vm/sleepimage, size 1088507904, partition base 0x0, maxio 2000000 ssd 1
5/21/14 4:28:37.000 PM kernel[0]: hibernate image major 1, minor 0, blocksize 4096, pollers 5
5/21/14 4:41:01.000 PM kernel[0]: IOPPF: Sent cpu-plimit-notification last value 24 (rounded time weighted average 24)
5/21/14 4:41:01.000 PM kernel[0]: IOPPF: Sent gpu-external-plimit-notification last value 12 (rounded time weighted average 8)
5/21/14 4:41:01.000 PM kernel[0]: IOPPF: Sent gpu-internal-plimit-notification last value 12 (rounded time weighted average 8)
5/21/14 4:41:01.000 PM kernel[0]: IOPPF: Sent gpu-external-plimit-notification last value 15 (rounded time weighted average 15)
5/21/14 4:41:01.000 PM kernel[0]: IOPPF: Sent gpu-internal-plimit-notification last value 14 (rounded time weighted average 14)
5/21/14 4:41:01.000 PM kernel[0]: IOPPF: Sent cpu-plimit-notification last value 29 (rounded time weighted average 29)
5/21/14 4:41:01.000 PM kernel[0]: vm_compressor_flush - starting
5/21/14 4:41:01.000 PM kernel[0]: IOPPF: Sent gpu-external-plimit-notification last value 8 (rounded time weighted average 10)
5/21/14 4:41:01.000 PM kernel[0]: IOPPF: Sent gpu-internal-plimit-notification last value 13 (rounded time weighted average 13)
5/21/14 4:41:01.000 PM kernel[0]: IOPPF: Sent cpu-plimit-notification last value 23 (rounded time weighted average 26)
5/21/14 4:41:01.000 PM kernel[0]: pci pause: SDXC
5/21/14 4:41:01.000 PM kernel[0]: IOPPF: Sent gpu-external-plimit-notification last value 3 (rounded time weighted average 5)
5/21/14 4:41:01.000 PM kernel[0]: IOPPF: Sent gpu-internal-plimit-notification last value 8 (rounded time weighted average 10)
5/21/14 4:41:01.000 PM kernel[0]: IOPPF: Sent cpu-plimit-notification last value 17 (rounded time weighted average 19)
5/21/14 4:41:01.000 PM kernel[0]: vm_compressor_flush completed - took 22525 msecs
5/21/14 4:41:01.000 PM kernel[0]: hibernate_flush_memory: buffer_cache_gc freed up 25099 wired pages
5/21/14 4:41:01.000 PM kernel[0]: hibernate_alloc_pages act 241315, inact 211360, anon 56665, throt 0, spec 227275, wire 533994, wireinit 172255
5/21/14 4:41:01.000 PM kernel[0]: hibernate_setup(0) took 55582 ms
5/21/14 4:29:33.000 PM kernel[0]: AppleThunderboltNHIType2::waitForOk2Go2Sx - retries = 5
5/21/14 4:41:01.000 PM kernel[0]: hibernate_page_list_setall(preflight 0) start 0xffffff825350a000, 0xffffff8253a1e000
5/21/14 4:41:01.000 PM kernel[0]: hibernate_teardown started
5/21/14 4:41:01.000 PM kernel[0]: hibernate_teardown: wired_pages 539094, free_pages 3537922, active_pages 69141, inactive_pages 13763, speculative_pages 5, cleaned_pages 0, compressor_pages 57
5/21/14 4:41:01.000 PM kernel[0]: hibernate_teardown_pmap_structs done: last_valid_compact_indx 443303
5/21/14 4:41:01.000 PM kernel[0]: hibernate_teardown: mark_as_unneeded_pages 8192, 61390, 32867
5/21/14 4:41:01.000 PM kernel[0]: hibernate_teardown completed - discarded 102449
5/21/14 4:41:01.000 PM kernel[0]: hibernate_page_list_setall time: 1108 ms
5/21/14 4:41:01.000 PM kernel[0]: pages 1093183, wire 413176, act 69141, inact 13763, cleaned 0 spec 5, zf 0, throt 0, compr 57, xpmapped 82909
5/21/14 4:41:01.000 PM kernel[0]: did discard act 131384 inact 192173 purgeable 46214 spec 227270 cleaned 0
5/21/14 4:41:01.000 PM kernel[0]: hibernate_page_list_setall found pageCount 496142
5/21/14 4:41:01.000 PM kernel[0]: IOHibernatePollerOpen, ml_get_interrupts_enabled 0
5/21/14 4:41:01.000 PM kernel[0]: IOHibernatePollerOpen(0)
5/21/14 4:41:01.000 PM kernel[0]: encryptStart 14010
5/21/14 4:41:01.000 PM kernel[0]: bitmap_size 0x7f4e0, previewSize 0x0, writing 495805 pages @ 0x934f0
5/21/14 4:41:01.000 PM kernel[0]: hibernate_rebuild started
5/21/14 4:41:01.000 PM kernel[0]: hibernate_rebuild_pmap_structs done: last_valid_compact_indx 443303
5/21/14 4:41:01.000 PM kernel[0]: hibernate_rebuild completed - took 115 msecs
5/21/14 4:41:01.000 PM kernel[0]: booter start at 1283 ms smc 0 ms, [14, 0, 0] total 1743 ms, dsply 392, 0 ms, tramp 1396 ms
5/21/14 4:41:01.000 PM kernel[0]: hibernate_machine_init: state 2, image pages 412973, sum was b3195d19, imageSize 0x3bbec000, image1Size 0x288e3000, conflictCount 7079, nextFree 1960
5/21/14 4:41:01.000 PM kernel[0]: hibernate_newruntime_map time: 0 ms, IOHibernatePollerOpen(), ml_get_interrupts_enabled 0
5/21/14 4:41:01.000 PM kernel[0]: IOHibernatePollerOpen(0) 6 ms
5/21/14 4:41:01.000 PM kernel[0]: hibernate_machine_init reading
5/21/14 4:41:01.000 PM kernel[0]: PMStats: Hibernate read took 659 ms
5/21/14 4:41:01.000 PM kernel[0]: hibernate_machine_init pagesDone 495939 sum2 3e9b893c, time: 659 ms, disk(0x20000) 470 Mb/s, comp bytes: 126795776 time: 113 ms 1061 Mb/s, crypt bytes: 321949696 time: 129 ms 2375 Mb/s
5/21/14 4:41:01.000 PM kernel[0]: Wake reason: EC.LidOpen (User)
5/21/14 4:41:01.000 PM kernel[0]: AirPort_Brcm43xx::powerChange: System Wake - Full Wake/ Dark Wake / Maintenance wake
5/21/14 4:41:01.000 PM kernel[0]: Previous Sleep Cause: 5
5/21/14 4:41:01.000 PM kernel[0]: Previous Shutdown Cause: 0
5/21/14 4:41:01.000 PM kernel[0]: IOPPF: Sent cpu-plimit-notification last value 0 (rounded time weighted average 0)
5/21/14 4:41:01.000 PM kernel[0]: IOPPF: Sent gpu-external-plimit-notification last value 0 (rounded time weighted average 0)
5/21/14 4:41:01.000 PM kernel[0]: IOPPF: Sent gpu-internal-plimit-notification last value 0 (rounded time weighted average 0)
5/21/14 4:41:01.000 PM kernel[0]: AppleThunderboltNHI::prePCIWake - power up complete - took 0 us
5/21/14 4:41:01.000 PM kernel[0]: AppleThunderboltHAL::earlyWake - complete - took 6 milliseconds
5/21/14 4:41:01.000 PM kernel[0]: Thunderbolt Self-Reset Count = 0xedefbe00
5/21/14 4:41:01.000 PM kernel[0]: TBT W (2): 0x0100 [x]
5/21/14 4:41:01.000 PM kernel[0]: IOThunderboltSwitch<0xffffff802fed0e00>(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 11 unplug = 0
5/21/14 4:41:01.000 PM kernel[0]: IOThunderboltSwitch<0xffffff802fed0e00>(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 12 unplug = 0
5/21/14 4:41:01.772 PM loginwindow[63]: CoreAnimation: warning, deleted thread with uncommitted CATransaction; set CA_DEBUG_TRANSACTIONS=1 in environment to log backtraces.
5/21/14 4:41:01.798 PM mDNSResponder[60]: 71: Could not write data to clientPID[18](configd) because of error - aborting connection
5/21/14 4:41:01.807 PM mDNSResponder[60]: 71: DNSServiceCreateConnection: 0 registered records, 14 kDNSServiceFlagsShareConnection operations PID[18](configd)
5/21/14 4:41:01.807 PM mDNSResponder[60]: -> DNSServiceGetAddrInfo      v4v6 p03-streams.icloud.com. PID[18]()
5/21/14 4:41:01.807 PM mDNSResponder[60]: -> DNSServiceGetAddrInfo      v4v6 c2s.triu.com.webexconnect.com. PID[18]()
5/21/14 4:41:01.807 PM mDNSResponder[60]: -> DNSServiceGetAddrInfo      v4v6 1-courier.sandbox.push.apple.com. PID[18]()
5/21/14 4:41:01.807 PM mDNSResponder[60]: -> DNSServiceGetAddrInfo      v4v6 www.apple.com. PID[18]()
5/21/14 4:41:01.807 PM mDNSResponder[60]: -> DNSServiceGetAddrInfo      v4v6 www.apple.com. PID[18]()
5/21/14 4:41:01.807 PM mDNSResponder[60]: -> DNSServiceGetAddrInfo      v4v6 talk.l.google.com. PID[18]()
5/21/14 4:41:01.807 PM mDNSResponder[60]: -> DNSServiceGetAddrInfo      v4v6 1-courier.push.apple.com. PID[18]()
5/21/14 4:41:01.808 PM mDNSResponder[60]: -> DNSServiceGetAddrInfo      v4v6 p03-streams.icloud.com. PID[18]()
5/21/14 4:41:01.808 PM mDNSResponder[60]: -> DNSServiceGetAddrInfo      v4v6 c2s.triu.com.webexconnect.com. PID[18]()
5/21/14 4:41:01.808 PM mDNSResponder[60]: -> DNSServiceGetAddrInfo      v4v6 1-courier.sandbox.push.apple.com. PID[18]()
5/21/14 4:41:01.808 PM mDNSResponder[60]: -> DNSServiceGetAddrInfo      v4v6 www.apple.com. PID[18]()
5/21/14 4:41:01.808 PM mDNSResponder[60]: -> DNSServiceGetAddrInfo      v4v6 talk.google.com. PID[18]()
5/21/14 4:41:01.808 PM mDNSResponder[60]: -> DNSServiceGetAddrInfo      v4v6 www.apple.com. PID[18]()
5/21/14 4:41:01.808 PM mDNSResponder[60]: -> DNSServiceGetAddrInfo      v4v6 1-courier.push.apple.com. PID[18]()
5/21/14 4:41:03.649 PM AddressBookSourceSync[16521]: -[ABAddressBook save] failed. (<ABAddressBook: 0x7fb19342b420>)
5/21/14 4:41:03.000 PM kernel[0]: IOBluetoothUSBDFU::probe
5/21/14 4:41:03.000 PM kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x8286 FirmwareVersion - 0x0131
5/21/14 4:41:04.000 PM kernel[0]: IOBluetoothUSBDFU::probe
5/21/14 4:41:04.000 PM kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x8286 FirmwareVersion - 0x0131
5/21/14 4:41:04.000 PM kernel[0]: **** [IOBluetoothHostControllerUSBTransport][start] -- completed -- result = TRUE -- 0xa000 ****
5/21/14 4:41:04.000 PM kernel[0]: **** [BroadcomBluetoothHostControllerUSBTransport][start] -- Completed -- 0xa000 ****
5/21/14 4:41:04.000 PM kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification -- 0xa000
5/21/14 4:41:04.000 PM kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
5/21/14 4:41:04.000 PM kernel[0]: **** [IOBluetoothHCIController][protectedBluetoothHCIControllerTransportShowsUp] -- Connected to the transport successfully -- 0x8a00 -- 0x0800 -- 0xa000 ****
5/21/14 4:41:04.420 PM digest-service[16542]: label: default
5/21/14 4:41:04.420 PM digest-service[16542]:           dbname: od:/Local/Default
5/21/14 4:41:04.420 PM digest-service[16542]:           mkey_file: /var/db/krb5kdc/m-key
5/21/14 4:41:04.420 PM digest-service[16542]:           acl_file: /var/db/krb5kdc/kadmind.acl
5/21/14 4:41:04.000 PM kernel[0]: **** [IOBluetoothHostControllerUSBTransport][SuspendDevice] -- Suspend -- suspendDeviceCallResult = 0x0000 (kIOReturnSuccess) -- 0xa000 ****
5/21/14 4:41:04.508 PM digest-service[16542]: digest-request: uid=0
5/21/14 4:41:04.706 PM digest-service[16542]: digest-request: netr probe 0
5/21/14 4:41:04.707 PM digest-service[16542]: digest-request: init request
5/21/14 4:41:04.710 PM digest-service[16542]: digest-request: init return domain: MACBOOKPRO-D6D5 server: AARONS-MACBOOK-PRO indomain was: <NULL>
5/21/14 4:41:04.000 PM kernel[0]: AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitialized
5/21/14 4:41:04.990 PM digest-service[16542]: digest-request: uid=0
5/21/14 4:41:04.990 PM digest-service[16542]: digest-request: init request
5/21/14 4:41:04.993 PM digest-service[16542]: digest-request: init return domain: MACBOOKPRO-D6D5 server: AARONS-MACBOOK-PRO indomain was: <NULL>
5/21/14 4:41:07.462 PM eapolclient[14386]: en0 STOP
5/21/14 4:41:08.939 PM CalendarAgent[191]: [com.apple.calendar.store.log.caldav.queue] [Account refresh failed with error: Error Domain=NSURLErrorDomain Code=-1009 "The Internet connection appears to be offline." UserInfo=0x7fbb0bf328b0 {NSUnderlyingError=0x7fbb0ef50540 "The Internet connection appears to be offline.", NSErrorFailingURLStringKey=https://longwa%[email protected]/calendar/dav/longwa%40gmail.com/user///longwa%[email protected]/calendar/dav/longwa%40gmail.com/user/, NSErrorFailingURLKey=https://longwa%[email protected]/calendar/dav/longwa%40gmail.com/user///longwa%[email protected]/calendar/dav/longwa%40gmail.com/user/, AccountName=Google, CalDAVErrFromRefresh=YES, NSLocalizedDescription=The Internet connection appears to be offline.}]
5/21/14 4:41:08.940 PM CalendarAgent[191]: [com.apple.calendar.store.log.caldav.queue] [Adding [<CalDAVAccountRefreshQueueableOperation: 0x7fbb09d5fef0; Sequence: 0>] to failed operations.]
5/21/14 4:41:08.942 PM CalendarAgent[191]: [com.apple.calendar.store.log.caldav.queue] [Account refresh failed with error: Error Domain=NSURLErrorDomain Code=-1009 "The Internet connection appears to be offline." UserInfo=0x7fbb09e229d0 {NSUnderlyingError=0x7fbb09c27a70 "The Internet connection appears to be offline.", NSErrorFailingURLStringKey=https://longwa%[email protected]/90451300/principal///longwa%[email protected]/90451300/principal/, NSErrorFailingURLKey=https://longwa%[email protected]/90451300/principal///longwa%[email protected]/90451300/principal/, AccountName=iCloud, CalDAVErrFromRefresh=YES, NSLocalizedDescription=The Internet connection appears to be offline.}]
5/21/14 4:41:08.947 PM CalendarAgent[191]: [com.apple.calendar.store.log.caldav.queue] [Adding [<CalDAVAccountRefreshQueueableOperation: 0x7fbb0b9a0ba0; Sequence: 0>] to failed operations.]
5/21/14 4:41:09.327 PM Calendar[16019]: [com.apple.calendar.ui.log] [An error exists on principal: [iCloud]]
5/21/14 4:41:09.330 PM Calendar[16019]: [com.apple.calendar.ui.log] [An error exists on principal: [Google]]
5/21/14 4:41:10.000 PM kernel[0]: MacAuthEvent en0   Auth result for: 90:84:0d:d6:3a:d2 MAC AUTH succeeded
5/21/14 4:41:10.000 PM kernel[0]: wlEvent: en0 en0 Link UP virtIf = 0
5/21/14 4:41:10.000 PM kernel[0]: AirPort: Link Up on en0
5/21/14 4:41:10.000 PM kernel[0]: en0: BSSID changed to 90:84:0d:d6:3a:d2
5/21/14 4:41:10.000 PM kernel[0]: AirPort: RSN handshake complete on en0
5/21/14 4:41:11.083 PM vmnet-bridge[897]: Preferences changed called
5/21/14 4:41:11.000 PM kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
5/21/14 4:41:11.547 PM airportd[82]: _doAutoJoin: Already associated to “silver_arrow”. Bailing on auto-join.
5/21/14 4:41:16.518 PM configd[18]: network changed: DNS* Proxy
5/21/14 4:41:16.523 PM UserEventAgent[11]: Captive: [CNInfoNetworkActive:1655] en0: SSID 'silver_arrow' making interface primary (cache indicates network not captive)
5/21/14 4:41:16.524 PM UserEventAgent[11]: Captive: CNPluginHandler en0: Evaluating
5/21/14 4:41:16.526 PM UserEventAgent[11]: Captive: en0: Not probing 'silver_arrow' (cache indicates not captive)
5/21/14 4:41:16.526 PM UserEventAgent[11]: Captive: CNPluginHandler en0: Authenticated
5/21/14 4:41:16.528 PM configd[18]: network changed: v4(en0!:192.168.200.109) DNS+ Proxy+ SMB
5/21/14 4:41:16.529 PM vmnet-bridge[897]: Dynamic store changed
5/21/14 4:41:16.000 PM kernel[0]: vmnet: VNetUserIf_Create: created userIf at 0xffffff805131e000.
5/21/14 4:41:16.000 PM kernel[0]: vmnet: VMNetConnect: returning port 0xffffff805131e000
5/21/14 4:41:16.000 PM kernel[0]: vmnet: Hub 0 does not exist, allocating memory.
5/21/14 4:41:16.000 PM kernel[0]: vmnet: Allocated hub 0xffffff8031954000 for hubNum 0.
5/21/14 4:41:16.000 PM kernel[0]: vmnet: VMNET_SO_BINDTOHUB: port: paddr 00:50:56:f2:af:bd
5/21/14 4:41:16.000 PM kernel[0]: vmnet: Hub 0
5/21/14 4:41:16.000 PM kernel[0]: vmnet:           Port 0
5/21/14 4:41:16.000 PM kernel[0]: vmnet: bridge-en0: media 80 dev 0xffffff8030aa6558 family 2
5/21/14 4:41:16.000 PM kernel[0]: vmnet: bridge-en0: wireless interface detected.
5/21/14 4:41:16.000 PM kernel[0]: vmnet: bridge-en0: up
5/21/14 4:41:16.000 PM kernel[0]: vmnet: bridge-en0: attached
5/21/14 4:41:16.000 PM kernel[0]: vmnet: VNetUserIfFree: freeing userIf at 0xffffff805131e000.
5/21/14 4:41:16.547 PM vmnet-bridge[897]: Started bridge for 0, en0
5/21/14 4:41:16.000 PM kernel[0]: vmnet: VMNetSetopt: Set link state DOWN
5/21/14 4:41:16.000 PM kernel[0]: vmnet: VMNetSetopt: Set link state UP
5/21/14 4:41:18.087 PM apsd[80]: Unrecognized leaf certificate
5/21/14 4:41:19.254 PM ntpd[92]: ntpd: wake time set -0.423353 s
5/21/14 4:41:19.267 PM com.apple.time[157]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
5/21/14 4:41:19.270 PM com.apple.time[157]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
5/21/14 4:41:19.654 PM com.apple.time[157]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
5/21/14 4:41:20.239 PM Calendar[16019]: CoreData: warning: An NSManagedObjectContext delegate overrode fault handling behavior to silently delete the object with ID '0x60800020d810 <x-coredata://023D0C8A-A6F8-4E29-93C2-B88F12740C96/CalDAVError/p34>' and substitute nil/0 for all property values instead of throwing.
5/21/14 4:41:20.240 PM Calendar[16019]: [com.apple.calendar.ui.log] [An error exists on principal: [Google]]
5/21/14 4:41:22.799 PM com.apple.SecurityServer[14]: Session 100033 created
5/21/14 4:41:45.000 PM kernel[0]: pci pause: SDXC
5/21/14 4:41:46.000 PM kernel[0]: NVDA::setPowerState(0xe810a8351ab1fe07, 0 -> 2) timed out after 45415 ms
5/21/14 4:42:17.000 PM kernel[0]: MacAuthEvent en0   Auth result for: 00:1b:63:2a:e8:f3 MAC AUTH succeeded
5/21/14 4:42:17.000 PM kernel[0]: wlEvent: en0 en0 Link UP virtIf = 0
5/21/14 4:42:17.000 PM kernel[0]: AirPort: RSN handshake complete on en0
5/21/14 4:42:17.000 PM kernel[0]: wl0: Roamed or switched channel, reason #1, bssid 00:1b:63:2a:e8:f3
5/21/14 4:42:17.000 PM kernel[0]: en0: BSSID changed to 00:1b:63:2a:e8:f3
5/21/14 4:42:20.000 PM kernel[0]: MacAuthEvent en0   Auth result for: 00:1b:63:2a:e8:f3 MAC AUTH succeeded
5/21/14 4:42:20.000 PM kernel[0]: wlEvent: en0 en0 Link UP virtIf = 0
5/21/14 4:42:20.000 PM kernel[0]: AirPort: RSN handshake complete on en0
5/21/14 4:42:20.000 PM kernel[0]: wl0: Roamed or switched channel, reason #8, bssid 00:1b:63:2a:e8:f3
5/21/14 4:42:20.000 PM kernel[0]: en0: BSSID changed to 00:1b:63:2a:e8:f3
5/21/14 4:43:50.000 PM bootlog[0]: BOOT_TIME 1400705030 0

Ok, more information for anyone that might care. The wake-up seems to be the familiar dark wake in order to go into hibernate mode. Except now, it's a death wake. Looking at the logs, I see that it happens exactly 70 minutes after sleeping, even though hibernatemode = 0 (which shouldn't hibernate at all!)
So my power settings look like this:
Currently in use:
standbydelay         4200
standby              1
halfdim              1
hibernatefile        /var/vm/sleepimage
darkwakes            0
gpuswitch            2
disksleep            10
sleep                10
autopoweroffdelay    14400
hibernatemode        0
autopoweroff         1
ttyskeepawake        1
displaysleep         2
acwake               0
lidwake              1
standbymode is 70 minutes, what a coincidence. I'm going to try setting it to 0 and see what that does.

27" Cinema Display Stays Black after cold boot or sleep

I'm wondering if I'm alone here. After applying the LED firmware update, I am unable to get my Apple 27" LED or Dell u2711 to recognize the connection to my radeon 5870 after a wake from sleep or cold boot.
To get either monitor to work, I have to unplug both of them and plug in a DVI monitor to the radeon and cold boot with that, once the machine is booted, I am able to plugin the 2 minidisplay port connections and both monitors work fine.
Once I shutdown though, I have to do the same song and dance the next morning to get the displays to work.
The interesting part is once the radeon and display port monitors stop talking, The process I listed above is the only thing that works to get them "talking" again - I cannot even just plug a DVI monitor in when the machine is already on, or use the keyboard shortcut for detect displays.
My console logs report 2 different things.
1. The Dock is reporting breakpoints and errors to CGSGetDisplayBounds
2. THere are lots of errors relating to the AppleHDAController.cpp

For a lot of people the trick seems to be to reset the pram a certain amount of times. Yesterday I gave it one more try, reset it 5 times in a row and hoped it helped. Started the machine today after shutting it down the evening before, black screen. Resetting pram once again and everything works.
There's a threat (http://discussions.apple.com/thread.jspa?threadID=559906) running parallel to this one concerning the same problem. For the original poster of the question the solution was to run Disk Utility, check for problems and repair disk permissions.
Neither of this works for me.
MacBook 1.83 (#2) 4H624 / 512MB / 60GB Mac OS X (10.4.7)

Adobe Bridge 1.0.3 displays white boxs after 10.4.6 update

After the update Bridge displays white boxes in the window. I have done all the standard stuff like delete prefs, rebuild caches, I even reinstalled it. I also ran the Adobe security update that was mentioned on another thread no luck. I have posted this problem at Adobe also. Anyone know of a fix?
Patrick

Turns out it was bad ram causing some of the trouble and trying to fix it only caused more of a mess.

Display stay black after wake up

Hi,
I hope there is someone who could help me, I have Macbook 2011 Early running Yosemite 10.10.2 and I have problem with my display turning back on after the sleep mode.
When I open the lid my display stay's black but everything is actually working, I'm able to login but everything is still black. This only happens when I close the lid, if my macbook is still open in the sleep mode than is everything absolutely fine. I had also blue screen two times, any idea what it could be please ?
I have tried to completely reinstall Yosemite, reset PRAM and SMC but none of this worked.
Any advise please ? Is it something with the hardware ?
I pretty much desperate and out of ideas how to fix that.
I will be really happy for any advise.
Thank you !
Best Regards,
Michal

If you have not already, reset PRAM
http://support.apple.com/kb/HT1379
and if that does not help, reset SMC
http://support.apple.com/kb/HT3964
which is unplugging the iMac and reconnecting using a precise procedure. You should disconnect ALL cables when you do this. If you have been using power strip, connect the iMac's power cord directly to a wall power outlet for this test. Power up with nothing connected except for the power cord. Once startup completes, add just your keyboard/mouse. I don't know how often this problem occurred, but try running the iMac that way (before connecting any other peripheral devices) to see if you can get it to recur. If you cannot, add back your peripherals (one at a time if possible), and again see if you can get the problem to recur.

HT203040 Iphone 5 camera only shows black after 8.1.3 update

Yesterday I updated my Iphone 5 with the new iOS 8.1.3
Unfortuntely now my camera shows only black. Also I am unable to switch from Picture mode to any other.
Front Camera works once every 10 attemps. Camera system is very unstable (Freezing Picture, slow,..)
Tried reset. Not successful.
Need help urgently please. Want to take pics of my babies :-(
Contacted Apple support 4x and asked for a call back. They wrote back that they cant rech me under my number.. Others can..

Hello mrjanek1,
Thanks for the question. I understand you are experiencing issues with you iPhone 5 camera after updating. It looks like you are on the right track, as you have come from the most relevant article for this issue:
Get help with the camera on your iPhone, iPad, or iPod touch - Apple Support
http://support.apple.com/en-us/HT203040
You see a closed lens or black screen
If you see a closed lens or black screen when you open the Camera app, try these steps:
Make sure that there’s nothing blocking the camera lens. If you’re using a case, try removing it.
Force the app to close, then open the Camera app again.
Restart your device, then open the Camera app again.
If your device has a front and rear camera, try both cameras by tapping camera swap icon. If you see the closed lens or black screen on only one camera, take your device to an Apple Retail Store or Authorized Service Provider for more help.
If your issue persists, please follow the last step to take the device to an Apple Store or Authorized Service Provider for inspection and additional diagnosis.
Thanks,
Matt M.

'prohibited' sign displayed on startup after 10.6.2 update (MacBook 2006)

Hello all,
I just updated my MacBook to 10.6.2 using Software Update. When it restarted, the Apple logo displayed as normal, but after about 10 seconds of the progress indicator being displayed, it showed a 'prohibited' sign -something like this, but monochrome:
http://static.bigstockphoto.com/thumbs/0/6/4/large/460205.jpg
It continues to show a grey screen with the prohibited sign, and a continuous progress indicator. I have restarted (by using the power button on the MacBook) several times, but I cannot get it to get past the 'prohibited' sign.
I have also tried holding down 'option' on startup, which allows me to see the MacBook's HD listed as a startup volume, but clicking on this to select it results in the same progress-indicator & prohibited sign loop, which never ends.
I would be grateful for any assistance in diagnosing what has happened.
The only unusual circumstance I can think of is that during the initial restart, I happened to pull out the VGA adaptor which normally connects the MacBook to an external display. I can't see how this would have affected the system update though.

You have a driver that didn't get moved, a device that is connected but lacks drivers or isn't compatible.
One reason I always favor recommend a clean install after backup and clone so you know you are just using the new OS, and that the hard drive was formatted and tested with latest version before install.
http://docs.info.apple.com/article.html?artnum=106805
http://reviews.cnet.com/8301-13727_7-10444282-263.html

Video playback suddenly black after ATI video driver update?

Totally bizarre - I updated to the latest drivers using RadarSync. Now videos from my flip (mpeg4) all play back as all black, unless I move the "Display Properties/Settings/Advanced/Troubleshoot/Hardware acceleration" slider to "Disable all DirectDraw and Direct3d" or lower.
Anyone else encountered this issue where videos start playing as all black? It seems to be independent of the decoder (xvid or ffmpeg) or video player (Microsoft Video player, VLC) application that I use.
Thinkpad T42p WinXP SP3
ATI MOBILITY FIRE GL T2/T2e 8.453.0.0
Xvid MPEG-4 Video codec (reinstalled with latest)
Solved!
Go to Solution.

I replaced all the ATI drivers with the ones directly from the website, which down-graded me to the 2007 version of the "ATI MOBILITY FIRE GL T2" 6.14.10.6547
Works great!

Display turns black after every 30-40 seconds

my display suddenly turns black during work! It happens about every 30-40 seconds. Then I have to press to lower the F1 Botton 2 or 3 times and then the F3 Buttonn several times until the light comes back. What happened? How can I fix this problem, which came after several days pause/standby?

Hey lubr,
Thanks for the question. I understand that you are experiencing issues with your internal display. The following resource may provide a solution:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Thanks,
Matt M.

Display stays black after waking due to USB plug-in/out

hi,
i forget to unplug the external mouse at times after shutting thsi pup down. when i unplug it AFTER sleep it wakes up again...but the screen stays dark (eventhough at night i see a phantom image very very faintly)
inow i have the mouse coming in through a hub (kesington 4 port, no external power)..soemtimes i can unplug the mouse no prob from that...sometime it still makes the comp awake...with the darkened screen...
a solution often is closing, waiting for sleep, opening...
is there an easier way? (increase brightness? stay alert and unplug BEFORE closing?)
at times i have also had to reboot...
any info would be grrrrreat...thanks!
pedro

i have this exact same problem. it happens with anything usb i plug in, or at least it does it with my old usb mouse, printer, and external hard drive. its done it ever since i had the machine about 2 and a bit years ago. ive also noticed it does it with my bluetooth apple mouse. when the pb is asleep with the mains power connected, if i press the mouse button by accident with the display closed it wakes the computer and then if i open the display it sometimes has issues bringing the display back on.
I don't know what causes this whether its a fault or just a design flaw in hardware or software, but i've just learned to live with it and try and remember not to unplug anything usb whilst its asleep.
Your phantom image in the background is caused because the actual display is on and the lcd is making the image, but the backlight isn't turning on so unless ur in the right light you wont see the image, you'll get the same if you just turn the brightness down to the bottom on ur display. the image is still there just without the backlight.
hope that helps a little.

Viewer Screen Black after Mavericks and Apertutre updates

Hello All, I have updated to Mavericks on my home iMac that is a few years old, and a new one at work that is 6 months old. Everything was fine and then I updated to Aperture 3.5. Now on BOTH machines, I am able to see all of my images in browser view fine. In split view the images in the filmstrip at the bottom of the screen are still fine, but the main image being viewed is black. In full viewer the image is completely black. It will indicate loading, show all photo info at the bottom of the viewer, but load as a black image.I can use an external editor PS5 without issue. I have completed the three step for the library first aid. When opening Aperture, the image may flash on the screen for a split second, and then show as black.
Apple support only seemed interested in having me sign up for Apple Care, even though this is a software bug, so this left me a bit unhappy. As a photographer that really needs Aperture running correctly, I'm at a standstill and may need to move to Adobe as an emergency solution.

Weird it is happening on two separate machines. Was the library from one machine copied to the other? What camera and are the originals Raw?
Try making a new empty library and import a few images into it, what happens? If it still fails there try running as a new user or from the Guest account if you have that enabled. Start Aperture and add a few images to a new library, what happens?
Also try looking at one of the original files in Preview, is it OK there?

Laptops do not display On Screen Display volume bar after Hotkeys Features Integration update

Hi,
I have also included most of the following information in response to a post, on the same subject, for T series machines.
I have 2 machines that are also affected by this problem, an R61 (8932-CTO XP-Pro-SP3 32-bit) and an R500 (2714-CTO XP-Pro-SP3 32-bit).
System update recently presented me with Hotkeys version 3.87.0000 on both of these machines, and I let System Update update the drivers in the vain hope that Lenovo had fixed this problem that has been previously reported as affecting many other series and models.
No such luck.
The only difference that I would like to report is that, for me, the last version of the Hotkey Features Integration package that displays the volume bar on my Windows XP machines is: 3.84.5000. I have all versions of the Hotkeys drivers saved on my machine and was therefore able to try them all out to verify which one was the last one that worked for me.
On both of the above mentioned systems, the version of Access Connections that is running is version 5.97.
On the R61, the version of Power Manager that is running is version 5.20.
On the R500, the version of Power Manager that is running is version 5.13. (System Update does not show version 5.20 as an available update on this machine.)
It would be really nice if Lenovo could finally fix this problem.
ThinkPad R61 8932-CTO T8300 2.40 Ghz 3GB RAM Win XP
ThinkPad R500 2714-CTO P8600 2.40 Ghz 3GB RAM Win XP; Two ThinkPad R500's 2714-CTO T9600 2.80 Ghz 4GB RAM Win 7
ThinkPad T500 2241-DB9 T9600 2.80 Ghz 4GB RAM Win 7
ThinkCenter A63 5237-CTO 3GB Ram Win XP; A21m and a pair of 380XD's

try to reinstall the OSD software. Uninstall the current OSD software that you have, and download the latest version from below.
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS000949
Edit note: Wrong link. See below for the correct link.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

MBP Display turns black after login

Hi,
When I wake up my MBP (15'' 10.4.10, Core duo, ATI Radeon), login, the screen
sometimes (may be every 4th time) turns black, but the MBP seems to be awake.
When I put it to sleep and wake it up again, it works fine. This seems to happen
more often after using a video projector.
May be the password was entered incorrectly, may be not. But it did not turn back
to the login screen either.
I don't have this issue with my iMac (different use though).
Any advise?
Thanks,
Dirk

Your issue sounds like the same issue i have on my 17" MBP. Are you waking then having to log in to wake from a screensaver?
I have my computer set to ask for authentication after it wakes and every once in a while, i'll wake my computer, and the authentication window immediately pops up, i proceed to put my password in then it goes back to black, although sometimes, it will the show the mouse cursor.
I dunno what happens, but I have noticed that when I do wake it up, the optical drive (i think) makes a noise as if it were reading, and that's usually when i get the black screen.
Anyone have any fixes? Could this be a video driver or hardware issue?

Photo Display being Black after Changing Exposure

Hello,
lately, when i change image adjustments the preview image shows up as black, whats going on?

Any ideas? It works fine but each time i change Exposure for example, the image becomes black, but when i resize it it comes back up, its really annoying!

Display in Black after a bunch of update

Similar Messages

Maybe you are looking for