# Display in BW reprts

Hi All,
I have a BW report where my few key figure columns are showing #. My question is in which situation we get # for key figures? How to avoid them?
Regards
Sravani

Hi,
The problem that you have explained generally comes because of two problems.
1. If you do check for zero suppression
2. You don't go for full expansion level of heirarchy.
Any way you mentioned first case is not applicable for you, check for second case. Expand heirarchy upto maximum level. Your problem will be resolved.

Similar Messages

How to display the selection screen fields on reprt output

Hi,
     I would like to know, which function module is use to diplay the selction scrren fields on the report output.
For e.g:
              on selction scren I have two select options.
     1. Company Code : 0000 to 9999
     2. Fiscal Year       : 2005 to 2008
I need to display these fields on the Report ouput, so that I can know that what selection criteria I have entered on selction screen.
Thanks & Regards
Chetan Chauhan.

Hi Chetan,
Lets say u have selection criterion as
*SELECTION SCREEN
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS : pa_werks LIKE vlcvehicle-werks DEFAULT 'XXX' OBLIGATORY,
             pa_date LIKE sy-datum DEFAULT sy-datum.
SELECT-OPTIONS : so_vbeln FOR vbrk-vbeln.
SELECTION-SCREEN END OF BLOCK b1.
Put a selection on that criterion according to selection screen,
Fill in a internal table.
Write itab-field1, field2.
Also use ABAPDOCU a tcode where u can find many demo programmes for all topic.
Reward points if useful.
cheers
Mohinder Singh
Cheers
Mohinder Singh Chauhan

Oops alv report not getting displayed

Hi experts,
I have REQUIREMENT WHERE I NEED TO DISPLAY THREE REPORTS USING ALAV OOPS.
I have maintained a FM to call alv rport.
,I have two validations to make at to different location in report. The report needs to be displayed only after I perform two different validations.
Issue is
I call this ALV reprt Fm once at : AT SELECTION SCREEN OUTPUT
and second time at : START OF SELECTION...
Now I can see the ALV report ( oops with three reports in one container) very well when i call it from : AT SECETION SCREEN OUTPUT( Here I perform one of teh two validations which I have mentioned above...The validation performed here is of Selction screen valiudation).
ButNow when I perform another validation at START OF SELECTIOn...here I cannot see the ALV report...TEH screen appearing is blank...
I am calling teh SAME OOPS ALV Function Module from both the locations...( START of SEL and AT selc O/p)..
I have debugged teh code and checked teh feidcatalogue genration as well s output table .and also structure
parameteers .. all of tehm are getting populated in both the cases ,,, but dont know why thye output doesnot appear in th last call..
please help ., I am stuck up...
TX a ton in adv...
Regards,
KT

Hi Kshitija T,
START-OF-SELECTION is processed in PAI of selection screen - as soon as all processing is done, the program flow will return, initialize your program an all of it's objects and display the selection screen again.
I solved this by disabling the default report status EXECUTE button and used AT-SELECTION-SCREEN events.
Regards,
Clemens

How can i display the presentation variable in my reports

Was facing a problem to display the Presentation variable on my report, however i managed to display it on answers, but when i try to display it on my Publisher report it doesnt shows any data.
I use to Select the Values From my prompt, and it shows the Reflection of Presentation Variable on my Answers Report. but i cannot see the Reflection of data on my Publisher Report Please any One Can help me with this.

Removing '' does not work it given the following error
"State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 27002] Near <@>: Syntax error [nQSError: 26012] . (HY000)"
and by adding space you mean that I use it as '@{ BbranchCode}'?
What I am doing at the moment is
1. Write the given query in oracle BI Answers.
2. Made a dashboard prompt in Answers.
3. Made a report in dashboard using the Answers report and the dashboard prompt.
Up till this step it works perfectly fine and the data displayed in manipulated on the basis of the values selected in the prompt.
4. Now what I want is to display this report in Dashboards using oracle BI publisher. For that I use the template builder provided for microsoft word.
5. I login to that add-on, open the answers report where I can see the field in the rowset. I select that field and save the template.
6. I open the oracle BI publisher and make a new reprt with data model of the answer's report and Layout of the one I just created.
7. I open the dashboard and put in the BI publisher report in the same page in which the asnwers report and the prompt was.
8. Upon changing the values of the prompt the report in the answers is still getting manipulated but I am not able to see its reflection of the BI publisher report.
The thing is that I am currently using this presentation variable to manipulate my reports in dashbords using dashboard prompts. The report is built in oracle BI Answers and it is working perfectly fine with it. Now when I use the template builder for Microsoft Word and open the template with the answers's report of this query I see the field in the row set but when I display the template in the dason the bases of this presentation variable the report in the oracle BI Answers is getting updated when I change values but when I use the template builder for microsoft word the the field is being shown in the row set.

Vendor 1099 reprting issue

Hi
When i run the 1099 vendor reprt. It just shows the vendor and his Tax id. How ever when i lcik the line items it doesnt show the witholding tax amout and other deails. I have maintained the tax number nadthe witholding tax code in vendor master. I did check the witholding tax account(fs10n) , where i see the amount
, but not when i run the report. Am i missing something
thanks
sapsri

Sapsri,
What transaction are you using to run this "1099 vendor report" that you mention?
Is it S_PL0_09000314 (program RFW1099M)
If yes, then you can check the following:
- on the selection screen, under the section for "Output Control", you have selected at least "Vendors" and "Payment Document Single Item".
- when you see the output, you must be seeing lots of icons in a bar near the top of the screen. Here's what pressing each of them will mean to you:
-- V_O - List of Vendors with correct TIN
-- V_E - List of Vendors with wrong TIN
-- L_I - Line Items (selected for output)
More icons will appear depending on whether you've chosen to create a file, and asked for it to be displayed on the output screen.
For your primary query, to see line items, press the button that says L_I on it.
Remember to assign points if found useful.
Regards
Gulshan

Re: Column is not getting displayed in the BI report

Hello Gurus,
I have developed a BI report with more number of parameters.
Case 1:
When i run my report , I am able to see data for particular condition but one column doesn't show any thing. All the rows in the column are blank.
Case 2
I tried to put the blank column as parameter, The Program works with out displaying that column data.
I am not sure where it is going wrong. I tried running the code in toad and i am able to see the data.
I have checked the code, Parameter description, length, Template and data definition.
Please help.
Thanks,
Sreekanth

Hi ,
For that column did u changed any alias name in the query...
check ur template once by loading the xml data...
check that column form field that matches with the xml tag or not..
Thanks,
Ananth

Using mini-DVI to VGA adapter to Samsung display

I have 2009 late model of mac mini, The text on display looks washed out, not clear or sharp at all from day one, I thought it was the old model of monitor, tried the same cable to another monitor on another computer, SAME. so I thought the problem could be the cable or adapter.
It's hard for me to believe is the signal from computer. I'm using VGA adapter made by Dynex bought from Best Buy.
Anybody has suggestions?? Thanks

Yeah, My old Samsung is lcd synmaster 17", bought many years ago at around $1000. Crazy, crazy price looked back. It's fine when I used it on the retired old Dell. It must be the adapter, trying not to buy another VGA adapter, could not image my next lcd will use one, anyway.
This cable has only 14 pins vs 15 pins on the other cable, not sure if it matters?? Or if Safari has anything to do with it??
Thank for you reply...

Mini-dvi to video adapter changing display on macbook?

I recently purchased a mini-dvi to video adapter for my macbook to be able to view photos and video on my tv. I'm having trouble with the display on my computer when I use the adapter. As soon as I plug in the mini-dvi video adapter into the computer the display on my computer switches from 1280 X 800 to 640 X 480. Attached to the adapter I have an s-video cable to my tv. The display shows the same on the tv but in black and white.
Any ideas? Thanks!

Turn mirroring off. That way the two displays can run independently from one another. The mirroring check box is in Displays Preferences under the Arrangement tab.

Display problems using mini-dvi to video adapter

I recently purchased the mini-dvi to video adapter for my powerbook to use my TV as a monitor and to play pictures and videos from the laptop to the TV. I am getting a full color display on the TV, but it's only the screen saver. None of my files, text, or any other desktop folders or menus appear when I open them up on the laptop. The only screen that opens is the display preferences when I open that up, but it's a different set of preferences than what's in my computer's display preferences, as it's header is "NTSC/PAL". But other than that 1 menu, nothing is appearing but the screen saver.

OK, I discovered that I didn't know what I was doing. With the Mini-DVI to video adapter, you need to use an S-Video cable that plugs into an S-video jack on the TV, and then you need a separate cable to plug into the audio out jack on the MacBook to plug into the TV.
I think you could also use an S-video to RCA component cable if you have a TV with component video input, but I couldn't get that to work so I went to the s-video to s-video cable.

View the .rtf file not display the data in BI Publisher Enterprise.

Hi,
Platform: OBIEE 10g in NT XPsp2
View the .rtf file not display the data in BI Publisher Enterprise.
Step 1, I created Answer-request, create .rtf file with Word and add the request name, Add bar chart and table, preview PDF is working fine with data, Upload this template to Answers, View Template from Answer is working fine with data.
Step 2, Answers – More Products > BI Publisher > My Folders > Create a new report > Edit > Data Model > New > Type: SQL Query > Data Source: Oracle BI EE > Query Builder > from SupplierSales assign Customer, Periods, Sales Facts (select Region, state, Year, Units Shipped) > Results > Save > Save
Click Layouts > New > enter Name ….. > Click Layouts > borrows .rtf file in Manage T file > Upload > Save > Click View
It is showing only the .rtf file without data. Why there is no data?
Please guide me to solve this issue.
Thanks,
Jo

Thanks for you reply,
Our scenario is this report is basically a dissconnected mode report... we are developing these reports for mobile clients.
We dint face this kind of issue while developing other reports.
So please let us know if you have any idea on why we are facing this issue.
Regards,
Maneesh

View not displaying the data in some of the clients

Hi,
Apps - 12.1.3
DB 11gr1
OS- RHEL 5.6, 64 bit
We have an application which is built using .net , but the database is 11gR1 we are connecting vis ODAC ... it was working good.
But when we treid to move to other server, we created a user B , created a VIEW.
But we are facing one strange problem that - when i query its showing data in client PC , but when i ran it from Windows Server 2008 R2 edtion no data is displaying?
Any hints y?
Thanks

Hi;
Is there any error message in alert and also tns,listener log? If no than I suggest rise SR
Regard
Helios

Can not properly view cover flow in full screen in external display

My mac is the new Mac book pro 15.4 inch screen and I connect my mac pro to external display e.g. Samsung LCD monitor 24 inches.
The bug is that I can not PROPERLY view full screen (in external display) for some application e.g. iTunes, and Front Row.
- When I use iTunes, I can not properly view Cover Flow view in full screen (in the external display screen) except the case of mirror display.
- For Front Row, I can not view full screen in external display but only my mac display.
However, for other DVD or VDO players, I can view movie on external display in full screen and I still be able to do other works on my mac screen.
Please let me know how to solve it.

found the likely issue! are you participating in youtube's html5 trial? go here and it will tell you if you are:
http://www.youtube.com/html5
exit the trial and it should fix the issue. it worked for me!

Strange scenario,Oracle can not display the data in mysql correctly

I use Heterogeneous Service+ODBC to achieve "oracle access mysql"(any other method?),and now i find Oracle can not display the data in mysql correctly:
-------mysql------------
mysql> create table tst(id int,name varchar(10));
Query OK, 0 rows affected (0.00 sec)
mysql> insert into tst values(1,'a');
Query OK, 1 row affected (0.00 sec)
mysql> select * from tst;
------------+
| id | name |
------------+
| 1 | a |
------------+
1 row in set (0.00 sec)
mysql> show create table tst\G
*************************** 1. row ***************************
Table: tst
Create Table: CREATE TABLE `tst` (
`id` int(11) DEFAULT NULL,
`name` varchar(10) DEFAULT NULL
) ENGINE=MyISAM DEFAULT CHARSET=utf8
1 row in set (0.00 sec)
-------------oracle ------------------
SQL> select count(*) from "tst"@mysql;
COUNT(*)
49
SQL> select * from "tst"@mysql;
id
1
SQL> desc "tst"@mysql;
Name Null? Type
id NUMBER(10)

You can make the following query on the result page:
"select * from the_table where movietitle = ? and cinema = ?"
then you set movietitle and cinema to those which the user selected. If the resultset contains more than 0 rows, that means the movie is available.
Below is the sample code, it assumes you have a connection to the database:
PreparedStatement stat = myConnection.prepareStatement("select * from the_table where movietitle = ? and cinema = ?");
stat.setString(1, usersMovieTitleSelection);
stat.setString(2, usersCinemaSelection);
ResultSet res = stat.executeQuery();
if (res.next()) {
out.print("The movie is available");
} else {
out.print("The movie is not available");
}Now just add that to your JSP page. Enjoy ! =)

Unable to capture value inside parameter T_LFBK of FK03 in display mode

Hi Experts,
I have to trigger a mail whenever there is a change in fields that are captured in parameter t_ffbk.
However i am unable to capture the the screen values for this parameter as FK03 is in display mode.Please tell me how can i capture the screen field values in parameter T_LFBK.
<Point offer removed by moderator>
Thanks in advance.
Edited by: Vinod Kumar on Jul 28, 2011 5:48 PM

Hi Experts,
I have to trigger a mail whenever there is a change in fields that are captured in parameter t_ffbk.
However i am unable to capture the the screen values for this parameter as FK03 is in display mode.Please tell me how can i capture the screen field values in parameter T_LFBK.
<Point offer removed by moderator>
Thanks in advance.
Edited by: Vinod Kumar on Jul 28, 2011 5:48 PM

Total is not getting displayed in the ALV output.

Hi,
Total is not getting displayed in the ALV output.
I m using :REUSE_ALV_BLOCK_LIST_APPEND & REUSE_ALV_BLOCK_LIST_DISPLAY
Are there any issues with it as the same settings are working fine with REUSE_ALV_LIST_DISPLAY
source code:
DATA: layout TYPE slis_layout_alv,
      IT_eventS TYPE slis_t_event,
      fcat   TYPE slis_t_fieldcat_alv WITH HEADER LINE,
      rec_fcat TYPE slis_t_fieldcat_alv WITH HEADER LINE.
TYPES: BEGIN OF ty_tab,
      belnr TYPE dberchz-belnr,
      belzart TYPE dberchz-belzart,
      net TYPE dberchz-nettobtr,
      END OF ty_tab.
DATA: lt_tab TYPE STANDARD TABLE OF ty_tab.
SELECT belnr belzart nettobtr
FROM dberchz
INTO TABLE lt_tab[]
WHERE belnr eq '000000000001'.
if sy-subrc ne 0.
ENDIF.
* defining layout
layout-colwidth_optimize = 'X'.
layout-def_status = 'X'.
*defning event
*event
*defining field catalog
fcat-col_pos = 1.
fcat-fieldname = 'BELNR'.
fcat-tabname = 'LT_TAB'.
APPEND fcat.
fcat-col_pos = 2.
fcat-fieldname = 'BELZART'.
fcat-tabname = 'LT_TAB'.
APPEND fcat.
fcat-col_pos = 3.
fcat-fieldname = 'NET'.
fcat-tabname = 'LT_TAB'.
fcat-do_sum = 'X'.
APPEND fcat.
*calling alv
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
EXPORTING
    i_callback_program             = 'YZ_PLR'
*   I_CALLBACK_PF_STATUS_SET       = ' '
*   I_CALLBACK_USER_COMMAND        = ' '
*   IT_EXCLUDING                   =
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
    is_layout                        = layout
    it_fieldcat                      = fcat[]
    i_tabname                        = 'LT_TAB'
    it_events                        = IT_EVENTS[]
*   IT_SORT                          =
*   I_TEXT                           = ' '
tables
    t_outtab                         = lt_tab[]
* EXCEPTIONS
*   PROGRAM_ERROR                    = 1
*   MAXIMUM_OF_APPENDS_REACHED       = 2
*   OTHERS                           = 3
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'
Thanks,
Gaurav

Hi
No I don't think, this is my code (based on your code) and it works fine:
TYPE-POOLS SLIS.
DATA: BEGIN OF LT_TAB OCCURS 0,
       BELNR LIKE BSEG-BELNR,
       GJAHR LIKE BSEG-GJAHR,
       WRBTR LIKE BSEG-WRBTR,
       WAERS LIKE BKPF-WAERS,
      END OF LT_TAB.
DATA: LAYOUT     TYPE SLIS_LAYOUT_ALV,
      IT_EVENTS TYPE SLIS_T_EVENT,
      FCAT       TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE,
      REC_FCAT   TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE.
START-OF-SELECTION.
FCAT-COL_POS       = 1.
FCAT-FIELDNAME     = 'BELNR'.
FCAT-TABNAME       = 'LT_TAB'.
FCAT-REF_FIELDNAME = 'BELNR'.
FCAT-REF_TABNAME   = 'BSEG'.
APPEND FCAT.
FCAT-COL_POS       = 2.
FCAT-FIELDNAME     = 'GJAHR'.
FCAT-TABNAME       = 'LT_TAB'.
FCAT-REF_FIELDNAME = 'GJAHR'.
FCAT-REF_TABNAME   = 'BSEG'.
APPEND FCAT.
FCAT-COL_POS       = 3.
FCAT-FIELDNAME     = 'WRBTR'.
FCAT-TABNAME       = 'LT_TAB'.
FCAT-CFIELDNAME    = 'WAERS'.
FCAT-REF_FIELDNAME = 'WRBTR'.
FCAT-REF_TABNAME   = 'BSEG'.
FCAT-DO_SUM        = 'X'.
APPEND FCAT.
FCAT-COL_POS       = 4.
FCAT-FIELDNAME     = 'WAERS'.
FCAT-TABNAME       = 'LT_TAB'.
FCAT-REF_FIELDNAME = 'WAERS'.
FCAT-REF_TABNAME   = 'BKPF'.
FCAT-DO_SUM        = SPACE.
APPEND FCAT.
SELECT * FROM BSEG INTO CORRESPONDING FIELDS OF TABLE LT_TAB
    WHERE BUKRS = 'MAAB'
      AND BELNR = '0000000001'.
LT_TAB-WAERS = 'EUR'.
MODIFY LT_TAB FROM LT_TAB TRANSPORTING WAERS WHERE WAERS = SPACE.
*CALLING ALV
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
    EXPORTING
      I_CALLBACK_PROGRAM = 'ZPROVAMAX5'.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
    EXPORTING
      IS_LAYOUT   = LAYOUT
      IT_FIELDCAT = FCAT[]
      I_TABNAME   = 'LT_TAB'
      IT_EVENTS   = IT_EVENTS[]
    TABLES
      T_OUTTAB    = LT_TAB[].
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'.
I've also inserted a currency field
Max

# Display in BW reprts

Similar Messages

Maybe you are looking for