Display in sales order

Hello Friends,
Is it possible to see the display of cond type k004 in sales order without maintaining the condition record, if so how.
Thanks
Ganesh

Dear all,
This depends how is configure the pricing procedure in your sap system. Do you use a standard sap pricing procedure or a customized one ?
Cond. type K004 basicaly can be enter manualy in sale order
but depends what type of sale document do you use and how is configure the princing control in you rsystem:
Here are the step for Define And Assign Pricing Procedures:
-Maintain pricing procedures
-Define customer pricing procedure
-Define document pricing procedure
-Assign document pricing procedures to order types
-Define Pricing Procedure Determination
So my advice is to look on the princing customization in your sap system
Best,
Cosmin

Similar Messages

Display Several Sales Orders from Same Business Customer TOGETHER in MD04

Hello
In MD04 is it possible to display several sales orders from same business customer together?
For instance one business customer order bikes for two times.
The Order-No are 12912(50st by 07/08/09) and 12913(100st by 10/08/09).
Normally after runnning of MRP(MD02), the planned orders are displayed seperately in MD04.
I want to display two orders together.
The reason is if some trouble happens in Production(for Ord-no 12912) and it cannot be deliveried on schedule, however Production (for Ord-no 12913) is going without trouble, the final-products for order 12913 should move for 12912.
If you have some good solutions, please share it.
Thank you for your advice.
Regards,

Hi Riyolshibashi,
Lets look at the two main scenarios, MTS and MTO.
In MTS, the general display filters are available in MD04. Standard SAP filters do not filter on 'customer'. I suspect this is because the concept would normally be illogical in a MTS environment. Planned orders do not exist to serve a customer, but to serve 'stock'. But let us not think about SAP and their logic.
SAP allows you to create customized filters, in IMG>Production>MRP>Evaluation>Filter>Define Display filter. Within this definition, under the "Addnl Selections' tab, you can tick 'Define addl selections in the transaction'. When you use this filter in MD04 display, then, one of the options available to you is to enter a specific Customer number, and then the display will only show the requirements from this customer. Since you have excluded all other customer's orders, all orders of a single customer will be displayed consecutively. Next to each other.
In the case of MTO, the 'filter-by-customer' concept makes more sense (although, not for the reason you have stated. You would have to find some manual method to convert a production order from supporting one sales order item, to supporting another sales order item. Possible but difficult). Anyway, the above mentioned customized filter would also work in an MTO environment.
Regards,
DB49

How to display the sales order in the line item in FB03

Hi Experts,
I have a requirement to display the sales order in the line item of t-code FBO3, could anybody suggest an userexit or BADI for the same.
Thanks in advance.
RP.

>
S. Rajesh Paul wrote:
> Hi Experts,
>
> I have a requirement to display the sales order in the line item of t-code FBO3, could anybody suggest an userexit or BADI for the same.
>
> Thanks in advance.
>
> RP.
I assume, you want to display sales order number in accounting document..... .
This is not something you can do it through the BADI..
You will have to change the G/L account field group (if it is already not there). you can then assign sales order number when posting to FI. In the field group, better choose sales order number and item number as optional fields.
If you can see the sales order field (may be empty) - you have to enter the sales order number when you post it.
Good luck

Displaying ERP Sales orders in CRM ISU BOL Tree

Hi,
I need to display ERP Sales orders of a BP in the CRM Web UI ISU BOL Tree.
We are using CRM 7.0 EHP3. The Genil Component for ISU BOL Tree is IUICALL.
Is there any relation/object which can give the list of ERP Sales orders for a BP.
I have tried with Genil Component ERP and query ERPQORDER, but it's not returning any orders for the given BP even the orders are available in ERP.
Can you please suggest whether I need to do any configuration wrt RFC set up to get ERP data ?
Also please suggest what are the prerequisites to be followed to access the ERP Sales Order data from CRM.
Thanks
Jayasri

Hi Jayasri,
Unfortunately there is no relation from BP to the ERP sales orders afaik. So the tree node implementation class is the place where you can execute the query.
The RFC destination stored in CL_CRM_ERP_IL=>GV_RFC is determined in method
CL_CRM_IC_ERP_SERVICE=>CLASS_CONSTRUCTOR(). Here in line 9 the current ERP sales order profile is determined (based on the business role) an in line 12 the profile data is read from the database (and stored in class attribute GS_ERPPROF-RFCDEST). Please set a break-point in this method to check why the destination is not retrieved correctly.
A possible reason is that your business role might not have the correct profile assignment or that the business role profile is not maintained at the point of time where CL_CRM_IC_ERP_SERVICE=>CLASS_CONSTRUCTOR() is invoked (like in the test environment or in BOL browser).
If the RFC connection is not available or the connected system is not valid ERP system (function SLS_LORD_MAINTAIN_EXIT is a prerequisite in ERP), the RFC destination is not considered. You can set break-points in methods CL_CRM_IC_ERP_SERVICE=>GET_RFC_DEST() and CL_CRM_ERP_IL=>CLASS_CONSTRUCTOR() to analyze the validation.
Kind regards,
Christian

Customer material info records are not getting displayed in Sales order

Hi ,
We are upgrading our client sap system from ECC 5.0 to ECC 6.0 .We are now in the testing phase .An issue came up regarding customer material info records .
When we are creating a sales order using VA01, after entering Material number and order quantity for an item if we press the ordering party tab(before saving the sales order) the customer material info records (value in cutomer material number) are gettting displayed.But if we save the sales order we are not able to see the customer material info records.
kindly guide me in this issue .
Thanks in advance .
Nikhil

hi nikhil,
check the tick box in vov8 "read info record",and when you create sales order(va01),dont enter the material number enter the "customer material number" and see whether you are getting the material number.
and also go to (va02) and check whether you are getting the CMIR details.
pls explain me the problem in detail for my better understanding
regards
senya

Items are not getting displayed in Sales Order Lines 'Ordered Item' field

Hi All,
Ordered Item field in Sales Order lines is not getting values When trying to create a Manual Sales Order.
When clicked on Ordered Item LOV, no values are getting displayed.
Thanks,
Chandra.

879035 wrote:
Hi,
I was unable to select any item (nothing is getting displayed in Ordered Item field when the LOV is clicked) in Sales Order Lines.
The Sales Order header information i was able to enter & generate the Order Number.
R12.1.3 is the version i am using.
Thanks,
Chandra.Have you done all the required setup in OM??
Like system parameters...Imp one would be Item Validation Organization
Make sure item is also available in the price list which you are using in order
Mahendra

Header condition type value not displayed in sales order output

Hi gurus,
I have observed a strange issue regarding a header condition in a sales order.
we have a set up like following:
1. If the Header condition XXXX is used in sales Order then this value should be printed on sales order output.
2. If the Header condition mentioned in above point is not maintained in sales order it should print the total price of all line items.
Though i have maintained the header condition value in Sales Order Header its not displayed in SO output.
That is , I have a sales order and it has one HEADER condition type entered with 3500 USD.
In fact this value is used for some business purpose and is being printed on the sales order output for a specific output type.
But where as in a sales order this header condition value is not getting printed on the output though I am using same data as of the sales order which is having the header condition value printed on its output.
According to business,we must have the header condition value printed on sales Order output.
Please suggest how to proceed.
Thanks in advance.

Not sure if you are using costom smartform to print invoice, if yes then ask developer to debug and find the root cause and fix it.
You might need to give him condition when it shuld be printed and when not.
You can take reference of another output type for which it is printing

Credit card number display in sales order

Hi,
I would like to know in which transaction the configuration needs to be done, to display partial credit card number as *. Eg. it should be displayed as ************7654
Thanks in advance.
Meenakshi

Hi,
The sales order is created using the Idoc information sent from a website.
E1EDK36 segment has that credit card details.
Menu Goto->Header->Payment card will display the details in the sales order after creation.
Thanks
Meenakshi

Condition value is not displaying in sales order

Hi Friends,
when i am creating sales order, condition type(JEXP,JECP,JA1X..) is displaying in cond.type column and percentage(14%,2%,1%) is displaying in amount column and
the condition value is not displaying in cond. value column in conitions tab of sales order.
In analysis it is showing as condition record found...
please help me...
with regards

Hi,
can it be that you have a problem with units of measure? Often, if there is no value in Condition value, the problem is in the master data of material. Did you use standard schema? If you not, have you tried it with standard schema? What is your value under "per" and "UoM"?
Regards Thomas

Help needed on the logic used to display ERP Sales order in CRM WEB UI

Hi,
I have a requirement where i need to trigger an activity/workflow in CRM for orders that are created through ERP Salesorder functionality. In the workflow list, we need to give the order description and provide an hyperlink to the order number. on selection of order number, it should display the ERP sales order. To achive this in workflow, i am trying to understand the as-is standard functionality which is available in Agent Inbox search on ERP sales order.This search is getting the ERP orders and on selecting the order it is opening the ERO sales order page. I tried debugging the method GET_MAINCATAEGORY available in the component iccmp_inbox and in the view Inboxsearch.But couldnt really able to crack the logic how it is retrieving the ERP sales order from inbox search. Any pointers on how this is achieved will be of great help.
Thanks,
Udaya

Hi Denis,
very good idea. I thougt myself about that workaround, but it is not really that for what I searched.
I mean the "SAP Query" is a really good standard tool, that are used by many customers. That is why think there must be a standard way to display the SAP Query in the Web UI without using Transaction Launcher.
But it seems that there is no way, except of the transaction launcher or by using an additional analyse system like SAP BI.
By the way do you know a Web UI compoment which enable the user to start reports like SE38?
Regards
Fabian

VF04 display also sales order number in case of delivery based billing

Hi,
for delivery related billing VF04 displays the delivery number in column 'sales document'.
Does anyone know, if possible to display also the sales order number additonally?
thanks
MG

Hello,
it is necessary to modify the strcuture VKDFIF used to show the billing due list.
The include VKDFIZ is reversed for custom development.
You should add the field for sales order.
Then you have to fill the added field by userexit.
The SAP note [69519|https://bosap-support.wdf.sap.corp/sap/support/notes/69519] gives an idea about it (it is for another field, you have to adapt it).
Best regards,
Ivano.

Inactive Material Display from Sales Order screen

Hi Everyone,
In Continuation to my previous thread,
[Suppress Cost Feild in Sales Order;
I want to inactive "Material Display (F8)" from Menu: Enviornment, in Sales Order Screen.
The requirement is that user must not display material related details, mainly cost, from Sales Order screen, itself.
Thanks,
-Sumi.

Hi,
To prevent user from displaying MAterial information from Menu bar refer to the following link form SAP. It has the complete answer to your question although it is for a different module.
http://wiki.sdn.sap.com/wiki/display/Snippets/TransactionVariant-AStepbyStepGuidefor+Creation
The procedure would be same, except that in SHd0 transaction code you would be giving VA02 as T.Code instead.
You can feel free to raise your queries if any after going through this link.
Regards,
Rohan Gudavalli

Display all sales order's smartform output in one spool request

Hi,
If suppose user has given sales order number from 01 to 14 then the output of all sales order should come in one print priview of spool request. How to do it?
Please help.
Thanks in advance,
Rgds,
Madhuri

Hi Madhuri,
Call open form write form and close form in loop so that till sales order remains in the loop the form will continue to print. In this way all sales order in internal table will print in the same spool.
Hope this will help you.
Regards,
Vijay

CO46 report not displaying all sales orders

Dear all
We are not able to get details of all sales orders in CO46..(All item categories and different sales order types).Screen remains blank while executing..It doesn't show line items-Overview screen..
can u please tell us the reason for the same
Is it to do with sales order type or item category...How do we bring all sales orders in this report
Regards
sudha

Hi
I think this report only shows the sales order that have diract relation to a Production Order. The other Sales Order are not showed
If you want a report for all sales order, try VA05 or SD01
Hope this helps
Roger

VA88 - Error list of settlement run displays irrelevant sales orders

Hi All,
This is a problem relating to transaction VA88 for settlement of sales orders into COPA. The error list of the settlement run is unnecessarily long since it also includes old, irrelevant sales orders that have no postings since the last VA88 run.
'Old' sales orders without recent postings on them are considered in the settlement run despite having the indicator "check trans. data" switched on in the VA88 selection screen.
What could be the reason???
Ideally, system should ignore the irrelevant sales orders (those without any transactional postings since the last settlement) if we select the "check transactional data" option in the VA88 selection screen
Any suggestions, thoughts, solutions would be highly appreciated.
Regards,
Soumya
Edited by: Soumya Bhattacharya on Mar 17, 2009 10:42 AM

Hi Soumya
Please see below. Transaction data checks are not made in the following situations, even
if the indicator is set:
1. The sender has a results analysis key, and an accrual calculation
    was already executed. In Customizing for accrual calculation, line
    item updates are not active for a version relevant for settlement.
2. The sender has a variance key and variances have already been
    determined.
3. The sender is a capital investment measure and has the technically
    completed status. Alternatively, the sender is an investment measur
    and the settlement was started with processing type 3.
4. The settlement rule was changed since the last settlement.
5. There is a valid distribution rule for fixed amounts.
6. Both a periodic distribution rule and an overall distribution rule
    have been defined for the settlement of costs with the same origin,
    and only the periodic distribution rule was used for the last
    settlement.
Basically you should see if any of these scenarios exist in your case. Item no. 6 looks like the most probable cause. Please check them again.
Hope this helps. Let me know.
Karthik

Display in sales order

Similar Messages

Maybe you are looking for