Display @ interactive Report
Hello All,
In my interactive Report, there is couple column in the “Do Not Display Column”.
I would like to display them as other default column.
Anyone can lead me about this issue ?
EB NY
Hi,
Login to the application, and run the report as developer account. After running the page, click on interactive report Action menu --> select columns. Select the columns which you want to display in report and move them to Display in Report list box, arrange the order of the columns as per your requirement. Now Click on Apply. Now you should be able to see the new columns on the report page.
To make this report setting available for all the users, you have to save this layout as default report setting. To do that, click on Action menu -> Save report . Select default report setting and then click on apply. This will save the current report as default report for all the users and they can see the newly added columns.
Hope this helps.
Regards,
Manish
Similar Messages
-
Internal error when try to display Interactive Report
Hello Gurus
I'm facing problem with displaying Interactive Reports in Web GUI (CRM 2007). When I try to open existing report or new created one, I see on the display area error "Load failed, Internal error" (no other system errors)
I think all configuration is done well, I have checked it by reports: Z_OLTP_CONFIG_CHECK and Z_OLTP_CONFIG_CHECK_BI, and except error DataSource /CRMBW/BOOL_TEXT is not active, everything is ok.
By the way - how can active this data source, while I can't find it anywhere, even in repository (RSA5)?
I thought maybe problem is with my browser or Flash player, but other functionalities uses flash work good (ie. key figures).
Any hints?
Best regards
LukaszHi Łukasz ,
the answer: CRM Interactive Reporting- "Load failed, Internal error"
Pzdr,
Mateusz -
Display interactive report rows based on user role.
Hello,
Can anyone please help me out with this issue. i have an interactive report and now i want to make this report as conditional based on user role. Like i want to dispaly all the report rows for an Admin user role and for a developer I want the report to display only his/her rows. Can anyone please help me how can I resolve this issue.
Do I need to have two separate reports for each role or can we make achieve this with only one report.
thanks,
OrtonHere is a possible answer.. Build your Interactive report off of a collection. And when you build the collection you can build an if statement to either build your select with or without the filtering of user_id..
See this blog entry for how to build a interactive report from a collection: http://www.oracleapplicationexpress.com/tutorials/71-oracle-apex-interactive-report-based-on-plsql-function
Thank you,
Tony Miller
Webster, TX -
Interactive report column filters to display differently than column values
Greetings...
We use images a lot in our interactive reports to provide a visual representation to a status, or something locked for update, or what-have-you. By default, when a user clicks the column heading of a column which contains images, the drop-down list that shows up displays the actual images, which is nice for the user to identify exactly which thing they want to filter on. The problem is when the user selects on of the options in the filtering drop-down, the resulting condition that is displayed under the interactive report search bar is the HTML code of the image. I'd like something else to display there because showing the user the HTML code is atrocious.
I didn't think what I want is possible, but then I came across the Page Locks page within ApEx (page 4000:291 in ApEx 4.0.1) which displays a list of all the pages of an application and whether they are locked or not. It also allows you to bulk lock or bulk unlock a bunch of pages. That page uses an interactive report with a column called "Status" which contains images that represent whether the page is locked or not. When you click the "Status" column heading to filter, instead of seeing the images of an open and closed lock, you see the words "Page Locked" and "Page Unlocked." And even better... when you select on of them, the condition that is displayed to the user is very user-friendly.
Can someone tell me how this is done so I can replicate it in my own apps?
Shane.Why not create the IR using the text you require e.g. 'Lock', 'Unlock' and then use JQuery to replace the text in the report with the image you want. All the filters should then show the plain text and the report will display the image. e.g.
http://apex.oracle.com/pls/apex/f?p=46801:1
Here's what I did:
Firstly make sure the IR has a region template.
Then create a Dynamic Action with the following attributes:
1. Advanced
2. Event: After Refresh
3. Selection Type: Region
4. Region: [select the IR Region]
5. Action: Execute JS Code
6. Fire on page load: [checked]
7. Code:
$('td [headers="TEST"]').each(function(index) {
if ($(this).text() == 'Lock') {
$(this).empty().html('<img src="/i/htmldb/icons/locked_small.gif" alt="Lock" />');
else {
$(this).empty().html('<img src="/i/htmldb/icons/unlocked_small.gif" alt="Unlock" />');
});Where TEST is the column name.
That's it, this may also be of interest:
http://simonhunt.blogspot.com/2011/10/adjusting-interactive-report-column.html
I hope it helps
Shunt -
I Need Interactive Report for displaying vendor information. Based on the s
Interactive Report for displaying vendor information. Based on the selection made by the corresponding Vendor Bank Details are listed such that the line selected in the basic list was visible along with the secondary list.
hi
Hi
Use the Table LFA1 and LFB1 in the basic list
and LFBK table details in the secondary list
see the sample code related to customer Sales orders
modify it with the Vendor tables
REPORT ZTEJ_INTAB1 LINE-SIZE 103 LINE-COUNT 35(5) NO STANDARD PAGE
HEADING.
*TABLES DECLARATION
TABLES : KNA1, VBAK, VBAP.
*SELECT OPTIONS
SELECT-OPTIONS: CUST_NO FOR KNA1-KUNNR.
*INITIALIZATION
INITIALIZATION.
CUST_NO-LOW = '01'.
CUST_NO-HIGH = '5000'.
CUST_NO-SIGN = 'I'.
CUST_NO-OPTION = 'BT'.
APPEND CUST_NO.
*SELECTION SCREEN VALIDATION
AT SELECTION-SCREEN ON CUST_NO.
LOOP AT SCREEN.
IF CUST_NO-LOW < 1 OR CUST_NO-HIGH > 5000.
MESSAGE E001(ZTJ1).
ENDIF.
ENDLOOP.
*BASIC LIST SELECTION
START-OF-SELECTION.
SELECT KUNNR NAME1 ORT01 LAND1 INTO
(KNA1-KUNNR, KNA1-NAME1,KNA1-ORT01,KNA1-LAND1)
FROM KNA1
WHERE KUNNR IN CUST_NO.
WRITE:/1 SY-VLINE,
KNA1-KUNNR UNDER 'CUSTOMER NO.' HOTSPOT ON,
16 SY-VLINE,
KNA1-NAME1 UNDER 'NAME',
61 SY-VLINE,
KNA1-ORT01 UNDER 'CITY',
86 SY-VLINE,
KNA1-LAND1 UNDER 'COUNTRY',
103 SY-VLINE.
HIDE: KNA1-KUNNR.
ENDSELECT.
ULINE.
*SECONDARY LIST ACCESS
AT user-command.
IF SY-UCOMM = 'IONE'.
PERFORM SALES_ORD.
ENDIF.
IF SY-UCOMM = 'ITWO'.
PERFORM ITEM_DET.
ENDIF.
*TOP OF PAGE
TOP-OF-PAGE.
FORMAT COLOR 1.
WRITE : 'CUSTOMER DETAILS'.
FORMAT COLOR 1 OFF.
ULINE.
FORMAT COLOR 3.
WRITE : 1 SY-VLINE,
3 'CUSTOMER NO.',
16 SY-VLINE,
18 'NAME',
61 SY-VLINE,
63 'CITY',
86 SY-VLINE,
88 'COUNTRY',
103 SY-VLINE.
ULINE.
FORMAT COLOR 3 OFF.
*TOP OF PAGE FOR SECONDARY LISTS
TOP-OF-PAGE DURING LINE-SELECTION.
*TOP OF PAGE FOR 1ST SECONDARY LIST
IF SY-UCOMM = 'IONE'.
ULINE.
FORMAT COLOR 1.
WRITE : 'SALES ORDER DETAILS'.
ULINE.
FORMAT COLOR 1 OFF.
FORMAT COLOR 3.
WRITE : 1 SY-VLINE,
3 'CUSTOMER NO.',
16 SY-VLINE,
18 'SALES ORDER NO.',
40 SY-VLINE,
42 'DATE',
60 SY-VLINE,
62 'CREATOR',
85 SY-VLINE,
87 'DOC DATE',
103 SY-VLINE.
ULINE.
ENDIF.
FORMAT COLOR 3 OFF.
*TOP OF PAGE FOR 2ND SECONDARY LIST
IF SY-UCOMM = 'ITWO'.
ULINE.
FORMAT COLOR 1.
WRITE : 'ITEM DETAILS'.
ULINE.
FORMAT COLOR 1 OFF.
FORMAT COLOR 3.
WRITE : 1 SY-VLINE,
3 'SALES ORDER NO.',
40 SY-VLINE,
42 'SALES ITEM NO.',
60 SY-VLINE,
62 'ORDER QUANTITY',
103 SY-VLINE.
ULINE.
ENDIF.
FORMAT COLOR 3 OFF.
*END OF PAGE
END-OF-PAGE.
ULINE.
WRITE :'USER :',SY-UNAME,/,'DATE :', SY-DATUM, 85 'END OF PAGE:',
SY-PAGNO.
SKIP.
*& Form SALES_ORD
*& FIRST SECONDARY LIST FORM
FORM SALES_ORD .
SELECT KUNNR VBELN ERDAT ERNAM AUDAT INTO
(VBAK-KUNNR, VBAK-VBELN, VBAK-ERDAT, VBAK-ERNAM, VBAK-AUDAT)
FROM VBAK
WHERE KUNNR = KNA1-KUNNR.
WRITE:/1 SY-VLINE,
VBAK-KUNNR UNDER 'CUSTOMER NO.' HOTSPOT ON,
16 SY-VLINE,
VBAK-VBELN UNDER 'SALES ORDER NO.' HOTSPOT ON,
40 SY-VLINE,
VBAK-ERDAT UNDER 'DATE',
60 SY-VLINE,
VBAK-ERNAM UNDER 'CREATOR',
85 SY-VLINE,
VBAK-AUDAT UNDER 'DOC DATE',
103 SY-VLINE.
HIDE : VBAK-VBELN.
ENDSELECT.
ULINE.
ENDFORM. " SALES_ORD
*& Form ITEM_DET
*& SECOND SECONDARY LIST FORM
FORM ITEM_DET .
SELECT VBELN POSNR KWMENG INTO
(VBAP-VBELN, VBAP-POSNR, VBAP-KWMENG)
FROM VBAP
WHERE VBELN = VBAK-VBELN.
WRITE : /1 SY-VLINE,
VBAP-VBELN UNDER 'SALES ORDER NO.',
40 SY-VLINE,
VBAP-POSNR UNDER 'SALES ITEM NO.',
60 SY-VLINE,
VBAP-KWMENG UNDER 'ORDER QUANTITY',
103 SY-VLINE.
ENDSELECT.
ULINE.
ENDFORM. " ITEM_DET
REPORT demo_list_at_pf.
START-OF-SELECTION.
WRITE 'Basic List, Press PF5, PF6, PF7, or PF8'.
AT pf5.
PERFORM out.
AT pf6.
PERFORM out.
AT pf7.
PERFORM out.
AT pf8.
PERFORM out.
FORM out.
WRITE: 'Secondary List by PF-Key Selection',
/ 'SY-LSIND =', sy-lsind,
/ 'SY-UCOMM =', sy-ucomm.
ENDFORM.
After executing the program, the system displays the basic list. The user can press the function keys F5 , F6 , F7 , and F8 to create secondary lists. If, for example, the 14th key the user presses is F6 , the output on the displayed secondary list looks as follows:
Secondary List by PF-Key Selection
SY-LSIND = 14
SY-UCOMM = PF06
Example for AT USER-COMMAND.
REPORT demo_list_at_user_command NO STANDARD PAGE HEADING.
START-OF-SELECTION.
WRITE: 'Basic List',
/ 'SY-LSIND:', sy-lsind.
TOP-OF-PAGE.
WRITE 'Top-of-Page'.
ULINE.
TOP-OF-PAGE DURING LINE-SELECTION.
CASE sy-pfkey.
WHEN 'TEST'.
WRITE 'Self-defined GUI for Function Codes'.
ULINE.
ENDCASE.
AT LINE-SELECTION.
SET PF-STATUS 'TEST' EXCLUDING 'PICK'.
PERFORM out.
sy-lsind = sy-lsind - 1.
AT USER-COMMAND.
CASE sy-ucomm.
WHEN 'FC1'.
PERFORM out.
WRITE / 'Button FUN 1 was pressed'.
WHEN 'FC2'.
PERFORM out.
WRITE / 'Button FUN 2 was pressed'.
WHEN 'FC3'.
PERFORM out.
WRITE / 'Button FUN 3 was pressed'.
WHEN 'FC4'.
PERFORM out.
WRITE / 'Button FUN 4 was pressed'.
WHEN 'FC5'.
PERFORM out.
WRITE / 'Button FUN 5 was pressed'.
ENDCASE.
sy-lsind = sy-lsind - 1.
FORM out.
WRITE: 'Secondary List',
/ 'SY-LSIND:', sy-lsind,
/ 'SY-PFKEY:', sy-pfkey.
ENDFORM.
<b>Vendor performance report</b>
See this sample code
*"Table declarations...................................................
TABLES:
EKKO, " Purchasing Document Header
CDHDR, " Change document header
SSCRFIELDS. " Fields on selection screens
*"Selection screen elements............................................
SELECT-OPTIONS:
S_EBELN FOR EKKO-EBELN, " Purchasing Document Number
S_LIFNR FOR EKKO-LIFNR, " Vendor's account number
S_EKGRP FOR EKKO-EKGRP, " Purchasing group
S_BEDAT FOR EKKO-BEDAT, " Purchasing Document Date
S_UDATE FOR CDHDR-UDATE. " Creation date of the change
" document
*" Data declarations...................................................
Field String to hold Purchase Document Number *
DATA:
BEGIN OF FS_EBELN,
EBELN(90) TYPE C, " Purchase Document Number
ERNAM TYPE EKKO-ERNAM, " Name of Person who Created
" the Object
LIFNR TYPE EKKO-LIFNR, " Vendor's account number
EKGRP TYPE EKKO-EKGRP, " Purchasing group
BEDAT TYPE EKKO-BEDAT, " Purchasing Document Date
END OF FS_EBELN,
Field String to hold Purchase Document Header *
BEGIN OF FS_EKKO,
EBELN TYPE EKKO-EBELN, " Purchasing Document Number
ERNAM TYPE EKKO-ERNAM, " Name of Person who Created the
" Object
LIFNR TYPE EKKO-LIFNR, " Vendor's account number
EKGRP TYPE EKKO-EKGRP, " Purchasing group
BEDAT TYPE EKKO-BEDAT, " Purchasing Document Date
END OF FS_EKKO,
Field String to hold Account Number and name of the Vendor *
BEGIN OF FS_LFA1,
LIFNR TYPE LFA1-LIFNR, " Account Number of Vendor
NAME1 TYPE LFA1-NAME1, " Name1
END OF FS_LFA1,
Field String to hold Change date and the name of the user *
BEGIN OF FS_CDHDR,
OBJECTCLAS TYPE CDHDR-OBJECTCLAS, " Object Class
OBJECTID TYPE CDHDR-OBJECTID, " Object value
CHANGENR TYPE CDHDR-CHANGENR, " Document change number
USERNAME TYPE CDHDR-USERNAME, " User name
UDATE TYPE CDHDR-UDATE, " Creation date of the change
" document
END OF FS_CDHDR,
Field String to hold Change document items *
BEGIN OF FS_CDPOS,
OBJECTCLAS TYPE CDPOS-OBJECTCLAS," Object class
OBJECTID(10) TYPE C, " Object Value
CHANGENR TYPE CDPOS-CHANGENR, " Document change number
TABNAME TYPE CDPOS-TABNAME, " Table Name
FNAME TYPE CDPOS-FNAME, " Field Name
VALUE_NEW TYPE CDPOS-VALUE_NEW, " New contents of changed field
VALUE_OLD TYPE CDPOS-VALUE_OLD, " Old contents of changed field
END OF FS_CDPOS,
Field String to hold Date Element Name *
BEGIN OF FS_DATAELE,
TABNAME TYPE DD03L-TABNAME, " Table Name
FIELDNAME TYPE DD03L-FIELDNAME, " Field Name
ROLLNAME TYPE DD03L-ROLLNAME, " Data element (semantic domain)
END OF FS_DATAELE,
Field String to hold Short Text of the Date Element *
BEGIN OF FS_TEXT,
ROLLNAME TYPE DD04T-ROLLNAME, " Data element (semantic domain)
DDTEXT TYPE DD04T-DDTEXT, " Short Text Describing R/3
" Repository Objects
END OF FS_TEXT,
Field String to hold data to be displayed on the ALV grid *
BEGIN OF FS_OUTTAB,
EBELN TYPE EKKO-EBELN, " Purchasing Document Number
ERNAM TYPE EKKO-ERNAM, " Name of Person who Created the
" Object
LIFNR TYPE EKKO-LIFNR, " Vendor's account number
EKGRP TYPE EKKO-EKGRP, " Purchasing group
BEDAT TYPE EKKO-BEDAT, " Purchasing Document Date
WERKS TYPE LFA1-WERKS, " Plant
NAME1 TYPE LFA1-NAME1, " Name1
USERNAME TYPE CDHDR-USERNAME, " User name
UDATE TYPE CDHDR-UDATE, " Creation date of the change
" document
DDTEXT TYPE DD04T-DDTEXT, " Short Text Describing R/3
" Repository Objects
VALUE_NEW TYPE CDPOS-VALUE_NEW, " New contents of changed field
VALUE_OLD TYPE CDPOS-VALUE_OLD, " Old contents of changed field
END OF FS_OUTTAB,
Internal table to hold Purchase Document Number *
T_EBELN LIKE STANDARD TABLE
OF FS_EBELN,
Internal table to hold Purchase Document Header *
T_EKKO LIKE STANDARD TABLE
OF FS_EKKO,
Temp Internal table to hold Purchase Document Header *
T_EKKO_TEMP LIKE STANDARD TABLE
OF FS_EKKO,
Internal table to hold Account number and Name of the Vendor *
T_LFA1 LIKE STANDARD TABLE
OF FS_LFA1,
Internal Table to hold Change date and the name of the user *
T_CDHDR LIKE STANDARD TABLE
OF FS_CDHDR,
Internal Table to hold Change document items *
T_CDPOS LIKE STANDARD TABLE
OF FS_CDPOS,
Temp. Internal Table to hold Change document items *
T_CDPOS_TEMP LIKE STANDARD TABLE
OF FS_CDPOS,
Internal Table to hold Data Element Name *
T_DATAELE LIKE STANDARD TABLE
OF FS_DATAELE,
Temp. Internal Table to hold Data Element Name *
T_DATAELE_TEMP LIKE STANDARD TABLE
OF FS_DATAELE,
Internal Table to hold Short Text of the Date Element *
T_TEXT LIKE STANDARD TABLE
OF FS_TEXT,
Internal Table to hold data to be displayed on the ALV grid *
T_OUTTAB LIKE STANDARD TABLE
OF FS_OUTTAB.
C L A S S D E F I N I T I O N *
CLASS LCL_EVENT_HANDLER DEFINITION DEFERRED.
*" Data declarations...................................................
Work variables *
DATA:
W_EBELN TYPE EKKO-EBELN, " Purchasing Document Number
W_LIFNR TYPE EKKO-LIFNR, " Vendor's account number
W_EKGRP TYPE EKKO-EKGRP, " Purchasing group
W_VALUE TYPE EKKO-EBELN, " Reflected Value
W_SPACE VALUE ' ', " Space
W_FLAG TYPE I, " Flag Variable
W_VARIANT TYPE DISVARIANT, " Variant
*--- ALV Grid
W_GRID TYPE REF TO CL_GUI_ALV_GRID,
*--- Event Handler
W_EVENT_CLICK TYPE REF TO LCL_EVENT_HANDLER,
*--- Field catalog table
T_FIELDCAT TYPE LVC_T_FCAT.
AT SELECTION-SCREEN EVENT *
AT SELECTION-SCREEN ON S_EBELN.
Subroutine to validate Purchase Document Number.
PERFORM VALIDATE_PD_NUM.
AT SELECTION-SCREEN ON S_LIFNR.
Subroutine to validate Vendor Number.
PERFORM VALIDATE_VEN_NUM.
AT SELECTION-SCREEN ON S_EKGRP.
Subroutine to validate Purchase Group.
PERFORM VALIDATE_PUR_GRP.
START-OF-SELECTION EVENT *
START-OF-SELECTION.
Subroutine to select all Purchase orders.
PERFORM SELECT_PO.
CHECK W_FLAG EQ 0.
Subroutine to select Object values.
PERFORM SELECT_OBJ_ID.
CHECK W_FLAG EQ 0.
Subroutine to select Changed values.
PERFORM SELECT_CHANGED_VALUE.
CHECK W_FLAG EQ 0.
Subroutine to Select Purchase Orders.
PERFORM SELECT_PUR_DOC.
Subroutine to select Vendor Details.
PERFORM SELECT_VENDOR.
Subroutine to select Text for the Changed values.
PERFORM DESCRIPTION.
END-OF-SELECTION EVENT *
END-OF-SELECTION.
IF NOT T_EKKO IS INITIAL.
Subroutine to populate the Output Table.
PERFORM FILL_OUTTAB.
Subroutine to build Field Catalog.
PERFORM PREPARE_FIELD_CATALOG CHANGING T_FIELDCAT.
CALL SCREEN 100.
ENDIF. " IF NOT T_EKKO...
CLASS LCL_EVENT_HANDLER DEFINITION
Defining Class which handles events
CLASS LCL_EVENT_HANDLER DEFINITION .
PUBLIC SECTION .
METHODS:
HANDLE_HOTSPOT_CLICK
FOR EVENT HOTSPOT_CLICK OF CL_GUI_ALV_GRID
IMPORTING E_ROW_ID E_COLUMN_ID.
ENDCLASS. " LCL_EVENT_HANDLER DEFINITION
CLASS LCL_EVENT_HANDLER IMPLEMENTATION
Implementing the Class which can handle events
CLASS LCL_EVENT_HANDLER IMPLEMENTATION .
*---Handle Double Click
METHOD HANDLE_HOTSPOT_CLICK .
Subroutine to get the HotSpot Cell information.
PERFORM GET_CELL_INFO.
SET PARAMETER ID 'BES' FIELD W_VALUE.
CALL TRANSACTION 'ME23N'.
ENDMETHOD. " HANDLE_HOTSPOT_CLICK
ENDCLASS. " LCL_EVENT_HANDLER
*& Module STATUS_0100 OUTPUT
PBO Event
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'OOPS'.
SET TITLEBAR 'TIT'.
Subroutine to fill the Variant Structure
PERFORM FILL_VARIANT.
IF W_GRID IS INITIAL.
CREATE OBJECT W_GRID
EXPORTING
I_SHELLSTYLE = 0
I_LIFETIME =
I_PARENT = CL_GUI_CONTAINER=>SCREEN0
I_APPL_EVENTS =
I_PARENTDBG =
I_APPLOGPARENT =
I_GRAPHICSPARENT =
I_NAME =
I_FCAT_COMPLETE = SPACE
EXCEPTIONS
ERROR_CNTL_CREATE = 1
ERROR_CNTL_INIT = 2
ERROR_CNTL_LINK = 3
ERROR_DP_CREATE = 4
OTHERS = 5.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. " IF SY-SUBRC <> 0
CALL METHOD W_GRID->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
I_BUFFER_ACTIVE =
I_BYPASSING_BUFFER =
I_CONSISTENCY_CHECK =
I_STRUCTURE_NAME =
IS_VARIANT = W_VARIANT
I_SAVE = 'A'
I_DEFAULT = 'X'
IS_LAYOUT =
IS_PRINT =
IT_SPECIAL_GROUPS =
IT_TOOLBAR_EXCLUDING =
IT_HYPERLINK =
IT_ALV_GRAPHICS =
IT_EXCEPT_QINFO =
IR_SALV_ADAPTER =
CHANGING
IT_OUTTAB = T_OUTTAB
IT_FIELDCATALOG = T_FIELDCAT
IT_SORT =
IT_FILTER =
EXCEPTIONS
INVALID_PARAMETER_COMBINATION = 1
PROGRAM_ERROR = 2
TOO_MANY_LINES = 3
OTHERS = 4
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. " IF SY-SUBRC <> 0.
ENDIF. " IF W_GRID IS INITIAL
CREATE OBJECT W_EVENT_CLICK.
SET HANDLER W_EVENT_CLICK->HANDLE_HOTSPOT_CLICK FOR W_GRID.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
PAI Event
MODULE USER_COMMAND_0100 INPUT.
CASE SY-UCOMM.
WHEN 'BACK'.
LEAVE TO SCREEN 0.
WHEN 'EXIT'.
LEAVE PROGRAM.
WHEN 'CANCEL'.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Form PREPARE_FIELD_CATALOG
Subroutine to build the Field catalog
<--P_T_FIELDCAT Field Catalog Table
FORM PREPARE_FIELD_CATALOG CHANGING PT_FIELDCAT TYPE LVC_T_FCAT .
DATA LS_FCAT TYPE LVC_S_FCAT.
Purchasing group...
LS_FCAT-FIELDNAME = 'EKGRP'.
LS_FCAT-REF_TABLE = 'EKKO'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Purchasing Document Number...
LS_FCAT-FIELDNAME = 'EBELN'.
LS_FCAT-REF_TABLE = 'EKKO' .
LS_FCAT-EMPHASIZE = 'C411'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
LS_FCAT-HOTSPOT = 'X'.
APPEND LS_FCAT TO PT_FIELDCAT .
CLEAR LS_FCAT .
Name of Person who Created the Object...
LS_FCAT-FIELDNAME = 'ERNAM'.
LS_FCAT-REF_TABLE = 'EKKO'.
LS_FCAT-OUTPUTLEN = '15' .
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Purchasing Document Date...
LS_FCAT-FIELDNAME = 'BEDAT'.
LS_FCAT-REF_TABLE = 'EKKO'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Vendor's account number...
LS_FCAT-FIELDNAME = 'LIFNR'.
LS_FCAT-REF_TABLE = 'EKKO'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Account Number of Vendor or Creditor...
LS_FCAT-FIELDNAME = 'NAME1'.
LS_FCAT-REF_TABLE = 'LFA1'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
LS_FCAT-COLTEXT = 'Vendor Name'(001).
LS_FCAT-SELTEXT = 'Vendor Name'(001).
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Creation date of the change document...
LS_FCAT-FIELDNAME = 'UDATE'.
LS_FCAT-REF_TABLE = 'CDHDR'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
LS_FCAT-COLTEXT = 'Change Date'(002).
LS_FCAT-SELTEXT = 'Change Date'(002).
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
User name of the person responsible in change document...
LS_FCAT-FIELDNAME = 'USERNAME'.
LS_FCAT-REF_TABLE = 'CDHDR'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
LS_FCAT-COLTEXT = 'Modified by'(003).
LS_FCAT-SELTEXT = 'Modified by'(003).
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Short Text Describing R/3 Repository Objects...
LS_FCAT-FIELDNAME = 'DDTEXT'.
LS_FCAT-REF_TABLE = 'DD04T'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '15'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Old contents of changed field...
LS_FCAT-FIELDNAME = 'VALUE_OLD'.
LS_FCAT-REF_TABLE = 'CDPOS'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '12'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
New contents of changed field...
LS_FCAT-FIELDNAME = 'VALUE_NEW'.
LS_FCAT-REF_TABLE = 'CDPOS'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '12'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
ENDFORM. " PREPARE_FIELD_CATALOG
*& Form SELECT_PO
Subroutine to select all the Purchase Orders
There are no interface parameters to be passed to this subroutine.
FORM SELECT_PO .
SELECT EBELN " Purchasing Document Number
ERNAM " Name of Person who Created
" the Object
LIFNR " Vendor's account number
EKGRP " Purchasing group
BEDAT " Purchasing Document Date
FROM EKKO
PACKAGE SIZE 10000
APPENDING TABLE T_EBELN
WHERE EBELN IN S_EBELN
AND BEDAT IN S_BEDAT.
ENDSELECT.
IF SY-SUBRC NE 0.
W_FLAG = 1.
MESSAGE S401(M8).
ENDIF. " IF SY-SUBRC NE 0
ENDFORM. " SELECT_PO
*& Form SELECT_OBJ_ID
Subroutine to select Object ID
There are no interface parameters to be passed to this subroutine.
FORM SELECT_OBJ_ID .
IF NOT T_EBELN IS INITIAL.
SELECT OBJECTCLAS " Object Class
OBJECTID " Object value
CHANGENR " Document change number
USERNAME " User name
UDATE " Creation date
FROM CDHDR
INTO TABLE T_CDHDR
FOR ALL ENTRIES IN T_EBELN
WHERE OBJECTID EQ T_EBELN-EBELN
AND UDATE IN S_UDATE
AND TCODE IN ('ME21N','ME22N','ME23N').
ENDSELECT.
IF SY-SUBRC NE 0.
W_FLAG = 1.
MESSAGE S833(M8) WITH 'Header Not Found'(031).
ENDIF. " IF SY-SUBRC NE 0.
ENDIF. " IF NOT T_EBELN IS INITIAL
ENDFORM. " SELECT_OBJ_ID
*& Form SELECT_CHANGED_VALUE
Subroutine to select Changed Values
There are no interface parameters to be passed to this subroutine.
FORM SELECT_CHANGED_VALUE .
IF NOT T_CDHDR IS INITIAL.
SELECT OBJECTCLAS " Object class
OBJECTID " Object value
CHANGENR " Document change number
TABNAME " Table Name
FNAME " Field Name
VALUE_NEW " New contents of changed field
VALUE_OLD " Old contents of changed field
FROM CDPOS
PACKAGE SIZE 10000
APPENDING TABLE T_CDPOS
FOR ALL ENTRIES IN T_CDHDR
WHERE OBJECTCLAS EQ T_CDHDR-OBJECTCLAS
AND OBJECTID EQ T_CDHDR-OBJECTID
AND CHANGENR EQ T_CDHDR-CHANGENR.
ENDSELECT.
IF SY-SUBRC NE 0.
W_FLAG = 1.
MESSAGE S833(M8) WITH 'Item Not Found'(032).
ENDIF. " IF SY-SUBRC NE 0.
ENDIF. " IF NOT T_CDHDR IS INITIAL
T_CDPOS_TEMP[] = T_CDPOS[].
ENDFORM. " SELECT_CHANGED_VALUE
*& Form SELECT_PUR_DOC
Subroutine to select Purchase Order Details
There are no interface parameters to be passed to this subroutine.
FORM SELECT_PUR_DOC .
IF NOT T_CDPOS IS INITIAL.
SORT T_EBELN BY EBELN.
LOOP AT T_CDPOS INTO FS_CDPOS.
READ TABLE T_EBELN INTO FS_EBELN WITH KEY EBELN =
FS_CDPOS-OBJECTID BINARY SEARCH.
IF SY-SUBRC NE 0.
DELETE TABLE T_EBELN FROM FS_EBELN.
ENDIF. " IF SY-SUBRC NE 0.
ENDLOOP. " LOOP AT T_CDPOS...
LOOP AT T_EBELN INTO FS_EBELN.
MOVE FS_EBELN-EBELN TO FS_EKKO-EBELN.
MOVE FS_EBELN-ERNAM TO FS_EKKO-ERNAM.
MOVE FS_EBELN-LIFNR TO FS_EKKO-LIFNR.
MOVE FS_EBELN-EKGRP TO FS_EKKO-EKGRP.
MOVE FS_EBELN-BEDAT TO FS_EKKO-BEDAT.
APPEND FS_EKKO TO T_EKKO.
ENDLOOP. " LOOP AT T_EBELN...
T_EKKO_TEMP[] = T_EKKO[].
ENDIF. " IF NOT T_CDPOS IS INITIAL
ENDFORM. " SELECT_PUR_DOC
*& Form SELECT_VENDOR
Subroutine to select Vendor details
There are no interface parameters to be passed to this subroutine.
FORM SELECT_VENDOR .
IF NOT T_EKKO IS INITIAL.
SORT T_EKKO_TEMP BY LIFNR.
DELETE ADJACENT DUPLICATES FROM T_EKKO_TEMP COMPARING LIFNR.
SELECT LIFNR " Account Number of Vendor or
" Creditor
NAME1 " Name 1
FROM LFA1
INTO TABLE T_LFA1
FOR ALL ENTRIES IN T_EKKO_TEMP
WHERE LIFNR EQ T_EKKO_TEMP-LIFNR.
IF SY-SUBRC NE 0.
MESSAGE S002(M8) WITH 'Master Details'(033).
ENDIF. " IF SY-SUBRC NE 0.
ENDIF. " IF NOT T_EKKO IS INITIAL
ENDFORM. " SELECT_VENDOR
*& Form DESCRIPTION
Subroutine to get the description
There are no interface parameters to be passed to this subroutine.
FORM DESCRIPTION .
IF NOT T_CDPOS IS INITIAL.
SORT T_CDPOS_TEMP BY TABNAME FNAME.
DELETE ADJACENT DUPLICATES FROM T_CDPOS_TEMP COMPARING TABNAME FNAME
SELECT TABNAME " Table Name
FIELDNAME " Field Name
ROLLNAME " Data element
FROM DD03L
INTO TABLE T_DATAELE
FOR ALL ENTRIES IN T_CDPOS_TEMP
WHERE TABNAME EQ T_CDPOS_TEMP-TABNAME
AND FIELDNAME EQ T_CDPOS_TEMP-FNAME.
IF NOT T_DATAELE IS INITIAL.
T_DATAELE_TEMP[] = T_DATAELE[].
SORT T_DATAELE_TEMP BY ROLLNAME.
DELETE ADJACENT DUPLICATES FROM T_DATAELE_TEMP COMPARING ROLLNAME.
SELECT ROLLNAME " Data element
DDTEXT " Short Text Describing R/3
" Repository Objects
FROM DD04T
INTO TABLE T_TEXT
FOR ALL ENTRIES IN T_DATAELE_TEMP
WHERE ROLLNAME EQ T_DATAELE_TEMP-ROLLNAME
AND DDLANGUAGE EQ SY-LANGU.
IF SY-SUBRC NE 0.
EXIT.
ENDIF. " IF SY-SUBRC NE 0.
ENDIF. " IF NOT T_DATAELE IS INITIAL.
ENDIF. " IF NOT T_CDPOS IS INITIAL.
ENDFORM. " DESCRIPTION
*& Form FILL_OUTTAB
Subroutine to populate the Outtab
There are no interface parameters to be passed to this subroutine.
FORM FILL_OUTTAB .
SORT T_CDHDR BY OBJECTCLAS OBJECTID CHANGENR.
SORT T_EKKO BY EBELN.
SORT T_LFA1 BY LIFNR.
SORT T_DATAELE BY TABNAME FIELDNAME.
SORT T_TEXT BY ROLLNAME.
LOOP AT T_CDPOS INTO FS_CDPOS.
READ TABLE T_CDHDR INTO FS_CDHDR WITH KEY
OBJECTCLAS = FS_CDPOS-OBJECTCLAS
OBJECTID = FS_CDPOS-OBJECTID
CHANGENR = FS_CDPOS-CHANGENR
BINARY SEARCH.
IF SY-SUBRC EQ 0.
MOVE FS_CDHDR-USERNAME TO FS_OUTTAB-USERNAME.
MOVE FS_CDHDR-UDATE TO FS_OUTTAB-UDATE.
READ TABLE T_EKKO INTO FS_EKKO WITH KEY
EBELN = FS_CDHDR-OBJECTID
BINARY SEARCH.
IF SY-SUBRC EQ 0.
MOVE FS_EKKO-EBELN TO FS_OUTTAB-EBELN.
MOVE FS_EKKO-ERNAM TO FS_OUTTAB-ERNAM.
MOVE FS_EKKO-LIFNR TO FS_OUTTAB-LIFNR.
MOVE FS_EKKO-EKGRP TO FS_OUTTAB-EKGRP.
MOVE FS_EKKO-BEDAT TO FS_OUTTAB-BEDAT.
READ TABLE T_LFA1 INTO FS_LFA1 WITH KEY
LIFNR = FS_EKKO-LIFNR
BINARY SEARCH.
IF SY-SUBRC EQ 0.
MOVE FS_LFA1-NAME1 TO FS_OUTTAB-NAME1.
ENDIF. " IF SY-SUBRC EQ 0.
ENDIF. " IF SY-SUBRC EQ 0.
ENDIF. " IF SY-SUBRC EQ 0.
MOVE FS_CDPOS-VALUE_NEW TO FS_OUTTAB-VALUE_NEW.
MOVE FS_CDPOS-VALUE_OLD TO FS_OUTTAB-VALUE_OLD.
READ TABLE T_DATAELE INTO FS_DATAELE WITH KEY
TABNAME = FS_CDPOS-TABNAME
FIELDNAME = FS_CDPOS-FNAME
BINARY SEARCH.
IF SY-SUBRC EQ 0.
READ TABLE T_TEXT INTO FS_TEXT WITH KEY
ROLLNAME = FS_DATAELE-ROLLNAME
BINARY SEARCH.
IF SY-SUBRC EQ 0.
MOVE FS_TEXT-DDTEXT TO FS_OUTTAB-DDTEXT.
ENDIF. " IF SY-SUBRC EQ 0.
ENDIF. " IF SY-SUBRC EQ 0.
APPEND FS_OUTTAB TO T_OUTTAB.
CLEAR FS_OUTTAB.
ENDLOOP.
ENDFORM. " FILL_OUTTAB
*& Form GET_CELL_INFO
Subroutine to get the Cell Information
--> W_VALUE Holds the value of Hotspot clicked
FORM GET_CELL_INFO .
CALL METHOD W_GRID->GET_CURRENT_CELL
IMPORTING
E_ROW =
E_VALUE = W_VALUE
E_COL =
ES_ROW_ID =
ES_COL_ID =
ES_ROW_NO =
ENDFORM. " GET_CELL_INFO
*& Form VALIDATE_PD_NUM
Subroutine to validate Purchase Document Number
There are no interface parameters to be passed to this subroutine.
FORM VALIDATE_PD_NUM .
IF NOT S_EBELN[] IS INITIAL.
SELECT EBELN " Purchase Document Number
FROM EKKO
INTO W_EBELN
UP TO 1 ROWS
WHERE EBELN IN S_EBELN.
ENDSELECT.
IF SY-SUBRC NE 0.
CLEAR SSCRFIELDS-UCOMM.
MESSAGE E717(M8).
ENDIF. " IF SY-SUBRC NE 0
ENDIF. " IF NOT S_EBELN[]...
ENDFORM. " VALIDATE_PD_NUM
*& Form VALIDATE_VEN_NUM
Subroutine to validate Vendor Number
There are no interface parameters to be passed to this subroutine.
FORM VALIDATE_VEN_NUM .
IF NOT S_LIFNR[] IS INITIAL.
SELECT LIFNR " Vendor Number
FROM LFA1
INTO W_LIFNR
UP TO 1 ROWS
WHERE LIFNR IN S_LIFNR.
ENDSELECT.
IF SY-SUBRC NE 0.
CLEAR SSCRFIELDS-UCOMM.
MESSAGE E002(M8) WITH W_SPACE.
ENDIF. " IF SY-SUBRC NE 0
ENDIF. " IF NOT S_LIFNR[]...
ENDFORM. " VALIDATE_VEN_NUM
*& Form VALIDATE_PUR_GRP
Subroutine to validate the Purchase Group
There are no interface parameters to be passed to this subroutine.
FORM VALIDATE_PUR_GRP .
IF NOT S_EKGRP[] IS INITIAL.
SELECT EKGRP " Purchase Group
FROM T024
INTO W_EKGRP
UP TO 1 ROWS
WHERE EKGRP IN S_EKGRP.
ENDSELECT.
IF SY-SUBRC NE 0.
CLEAR SSCRFIELDS-UCOMM.
MESSAGE E622(M8) WITH W_SPACE.
ENDIF. " IF SY-SUBRC NE 0
ENDIF. " IF NOT S_EKFRP[]...
ENDFORM. " VALIDATE_PUR_GRP
*& Form FILL_VARIANT
Subroutine to fill the Variant Structure
There are no interface parameters to be passed to this subroutine
FORM FILL_VARIANT .
Filling the Variant structure
W_VARIANT-REPORT = SY-REPID.
W_VARIANT-USERNAME = SY-UNAME.
ENDFORM. " FILL_VARIANT
<b>Reward if usefull</b> -
Interactive report for displaying customer information
hi,
how to create an interactive report for displaying customer information based on selection smade ,and corresponding bank details.pls check the sample code
Use the tables Kna1 and knbk to get the customer details.
***extract the data into internal table
select * from dbtab into itab.
*In the loop hide the field you want to trigger the interactive list.
loop at itab.
write: / itab-kunnr, itab-name1.
Hide itab-kunnr.
endloop.
use at line selecton to get desired output based on the condition
at line-selection.
select * fro dbab into itab where field = itab-kunnr.
awards points if help ful. -
Interactive report: third screen not displaying
Hi Experts,
I am doing a interactive report in ALV grid...and my requirement is
when the user clicks on SPMON which is displayed on the initial screen the first screen
should display and in first screen when the user clicks LIFNR second screen should display..
I am able to display initial and first screen but second screen is not displaying...I am
pasting a pinch of my code please have a look and advice me..
FORM USER_COMM USING P_UCOMM LIKE SY-UCOMM
R_SELFIELD TYPE SLIS_SELFIELD.
DATA : OK_CODE TYPE SY-UCOMM.
OK_CODE = P_UCOMM.
CASE OK_CODE.
WHEN '&IC1'.
IF R_SELFIELD-FIELDNAME = 'SPMON'.
READ TABLE IT_TAB INDEX R_SELFIELD-TABINDEX.
REFRESH IT_TAB_1[].
CLEAR IT_TAB_1.
LOOP AT IT_FIRST WHERE WERK EQ IT_TAB-WERK AND SPMON EQ IT_TAB-SPMON
AND ART = IT_TAB-ART.
MOVE IT_FIRST-WERK TO IT_TAB_1-WERK.
MOVE IT_FIRST-LIFNR TO IT_TAB_1-LIFNR.
MOVE IT_FIRST-MEANQ TO IT_TAB_1-MEANQ.
MOVE IT_FIRST-BASME_QM TO IT_TAB_1-BASME_QM.
APPEND IT_TAB_1.
CLEAR: IT_FIRST, IT_TAB_1.
ENDLOOP.
REFRESH IT_FIELDCAT1[].
S_LAYOUT-ZEBRA = 'X' .
S_LAYOUT-COLWIDTH_OPTIMIZE = 'X' .
PERFORM FIELD_CATALOG1 TABLES IT_FIELDCAT1
USING:
'IT_TAB_1' 'WERK' ' ' 'PLANT' ' ' ' ',
'IT_TAB_1' 'LIFNR' ' ' 'VENDOR NUMBER' ' ' ' ',
'IT_TAB_1' 'MEANQ' ' ' 'MEANQSCORE' ' ' ' ',
'IT_TAB_1' 'BASME_QM' ' ' 'BuM' ' ' ' ',
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-CPROG
I_CALLBACK_USER_COMMAND = 'USER_COMM_1'
IS_LAYOUT = S_LAYOUT
IT_FIELDCAT = IT_FIELDCAT1[]
TABLES
T_OUTTAB = IT_TAB_1[]
ENDIF.
ENDCASE.
ENDFORM. "USER_COMM
For second screen : which is not working
FORM USER_COMM_1 USING P_UCOMM LIKE SY-UCOMM
R_SELFIELD TYPE SLIS_SELFIELD.
DATA : OK_CODE TYPE SY-UCOMM.
OK_CODE = P_UCOMM.
CASE OK_CODE.
WHEN '&IC2'.
IF R_SELFIELD-FIELDNAME = 'LIFNR'.
READ TABLE IT_TAB_1 INDEX R_SELFIELD-TABINDEX.
REFRESH IT_TAB_2[].
CLEAR IT_TAB_2.
LOOP AT IT_SECOND WHERE WERK EQ IT_TAB_1-WERK AND
SPMON EQ IT_TAB_1-SPMON AND ART = IT_TAB_1-ART AND LIFNR = IT_TAB_1-LIFNR.
MOVE IT_SECOND-ART TO IT_TAB_2-ART.
MOVE IT_SECOND-SPMON TO IT_TAB_2-SPMON.
MOVE IT_SECOND-MATNR TO IT_TAB_2-MATNR.
APPEND IT_TAB_2.
CLEAR: IT_SECOND, IT_TAB_2.
ENDLOOP.
REFRESH IT_FIELDCAT2[].
S_LAYOUT-ZEBRA = 'X' .
S_LAYOUT-COLWIDTH_OPTIMIZE = 'X' .
PERFORM FIELD_CATALOG1 TABLES IT_FIELDCAT2
USING:
'IT_TAB_2' 'MATNR' ' ' 'MATERIAL NUMBER' ' ' ' ',
'IT_TAB_2' 'MEANQ' ' ' 'MEANQSCORE' ' ' ' ',
'IT_TAB_2' 'BASME_QM' ' ' 'BuM' ' ' ' ',
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-CPROG
IS_LAYOUT = S_LAYOUT
IT_FIELDCAT = IT_FIELDCAT2[]
TABLES
T_OUTTAB = IT_TAB_2[]
ENDIF.
ENDCASE.
ENDFORM. "USER_COMM_1
Please advice
Karthik
Edited by: Karthik R on Apr 29, 2009 12:22 PMUse both conditions in USER_COMM.
FORM USER_COMM USING P_UCOMM LIKE SY-UCOMM
R_SELFIELD TYPE SLIS_SELFIELD.
DATA : OK_CODE TYPE SY-UCOMM.
OK_CODE = P_UCOMM.
CASE OK_CODE.
WHEN '&IC1'.
IF R_SELFIELD-FIELDNAME = 'SPMON'. " Field name SPMON
READ TABLE IT_TAB INDEX R_SELFIELD-TABINDEX.
REFRESH IT_TAB_1[].
CLEAR IT_TAB_1.
LOOP AT IT_FIRST WHERE WERK EQ IT_TAB-WERK AND SPMON EQ IT_TAB-SPMON
AND ART = IT_TAB-ART.
MOVE IT_FIRST-WERK TO IT_TAB_1-WERK.
MOVE IT_FIRST-LIFNR TO IT_TAB_1-LIFNR.
MOVE IT_FIRST-MEANQ TO IT_TAB_1-MEANQ.
MOVE IT_FIRST-BASME_QM TO IT_TAB_1-BASME_QM.
APPEND IT_TAB_1.
CLEAR: IT_FIRST, IT_TAB_1.
ENDLOOP.
REFRESH IT_FIELDCAT1[].
S_LAYOUT-ZEBRA = 'X' .
S_LAYOUT-COLWIDTH_OPTIMIZE = 'X' .
PERFORM FIELD_CATALOG1 TABLES IT_FIELDCAT1
USING:
'IT_TAB_1' 'WERK' ' ' 'PLANT' ' ' ' ',
'IT_TAB_1' 'LIFNR' ' ' 'VENDOR NUMBER' ' ' ' ',
'IT_TAB_1' 'MEANQ' ' ' 'MEANQSCORE' ' ' ' ',
'IT_TAB_1' 'BASME_QM' ' ' 'BuM' ' ' ' ',
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-CPROG
I_CALLBACK_USER_COMMAND = 'USER_COMM_1'
IS_LAYOUT = S_LAYOUT
IT_FIELDCAT = IT_FIELDCAT1[]
TABLES
T_OUTTAB = IT_TAB_1[]
ELSEIF R_SELFIELD-FIELDNAME = 'LIFNR'. " ELSE FIELDNAME LIFNR
READ TABLE IT_TAB_1 INDEX R_SELFIELD-TABINDEX.
REFRESH IT_TAB_2[].
CLEAR IT_TAB_2.
LOOP AT IT_SECOND WHERE WERK EQ IT_TAB_1-WERK AND
SPMON EQ IT_TAB_1-SPMON AND ART = IT_TAB_1-ART AND LIFNR = IT_TAB_1-LIFNR.
MOVE IT_SECOND-ART TO IT_TAB_2-ART.
MOVE IT_SECOND-SPMON TO IT_TAB_2-SPMON.
MOVE IT_SECOND-MATNR TO IT_TAB_2-MATNR.
APPEND IT_TAB_2.
CLEAR: IT_SECOND, IT_TAB_2.
ENDLOOP.
REFRESH IT_FIELDCAT2[].
S_LAYOUT-ZEBRA = 'X' .
S_LAYOUT-COLWIDTH_OPTIMIZE = 'X' .
PERFORM FIELD_CATALOG1 TABLES IT_FIELDCAT2
USING:
'IT_TAB_2' 'MATNR' ' ' 'MATERIAL NUMBER' ' ' ' ',
'IT_TAB_2' 'MEANQ' ' ' 'MEANQSCORE' ' ' ' ',
'IT_TAB_2' 'BASME_QM' ' ' 'BuM' ' ' ' ',
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-CPROG
IS_LAYOUT = S_LAYOUT
IT_FIELDCAT = IT_FIELDCAT2[]
TABLES
T_OUTTAB = IT_TAB_2[]
ENDIF.
ENDCASE.
ENDFORM. "USER_COMM
Regards,
Gurpreet -
Display VK18 in interactive report
hi,
i want to write a interactive report to display vk18 if the customer part number is double clicked. any one tell me how to set paramete id for the field KOTABNR with paramete id 'KON'.
bcoz it only display the firat screen or the key combination screen. it shpuld directly go to the display screen.
please advice.
thanksHello Madhu,
We can set the parameter id just folow the below example
AT LINE-SELECTION.
SET PARAMETER ID: 'KON' Field KOTABNR ie (Vlaue of the KOTABNR)
CALL TRANSACTION 'VK18' .
Try this it will work definetly... ....................... -
Display page in Interactive Report
Hello everyone,
I was trying to figure out how to display a new page in the main page when a link is clicked (link is in the main page)
To explain it better:
I have page 900 which is an interactive report
when we click on the first link of of the report it opens a new page say page 2
How can I make page 2 display in page 900 when the link is clicked, rather than completely changing from page 900 to page 2
Hope I could make this understandable, please let me know if u have question
also, this was a part of a question answered in a previous thread: Itnteractive Report: Links
Itnteractive Report: Links
Thanks you for your help
appreciate it
SamHi,
I just think if you use iFrame.
I did create sample to your app. Page 910.
It not look nice, but you can modify it , and maybe get better solution
Br,Jari -
Displaying title on Interactive Report
Folks, there should be an easy solution to this, but I can't find it. I'd like to be able to display a title on my interactive reports. I'm using the "IRR Region Template," and using another one isn't an option (b/c the other ones don't properly display wide reports).
I'm guessing the IRR Region Template doesn't include the #TITLE# substitution string, but can it? Can #TITLE# be added? Or can I accomplish this simple requirement via some other fashion?
Thanks
RobQuestion: Where do you want the title to appear on the page?
I'm not familar with this IRR Region Template. Is it borderless or does it have a title "area"? If it has a title area, it ought to have a #TITLE# substitution string for that area? You say "I'm guessing ..." Can you take a look at the template and tell us what's there? Do you know how to look at the templates?
I added a simple title as a display-only page item on a report. But that's pretty limited as there is only so much display room between the page tabs and the search box. You could also concatenate an application item to the application title and set it to the report title you want when the page displays.
Howard -
Control on Interactive Report Data displaying
Hi All,
We are using APEX 4.0.
Here are the few things that I am trying to accomplish -
I have created a few interactive reports in different tabs. Each report takes 4 parameters from the screen, and the values get to carry to the next report.
1. When users first come in to the tab, I don't want the report to be displayed until the SUBMIT button is clicked.
Currently, we have created an item (dis_flag) and use 1 or 0 to control the display. But, the page always get requery after the users browsing to other tabs and come back. Any other methods that you can advise?
2. Once the submit button is clickeded, the data should be kept on this page even after the users browsing around the application. No data should be change, until the SUBMIT button is been clicked again. Any ideas on this one?
The reason that we don't want the report to be displayed first is because the data is huge, and if this is running at the first, some users maybe thinking that something is wrong on the page. That's why we want them to click on submit, so, they know they need to wait. Also, since the report can be huge, we don't want this to be re-query again and again while users are browsing around the application.
Thank you for any advises that you can give!
LC
Edited by: LC on Sep 9, 2011 1:51 PM
rephase the question1 . Put a condition on the interactive report to stop it running when you first display the page - I think you have done this already.
2. Enable caching for that page (go to the Server Cache tab on Edit Page) - this will also need a condition so that you can actually refresh the report when you need to.
This should make the browser use the cached version of the report (i.e. the one you ran originally) until you tell it not to. -
Interactive Report, Image display on download.
hi all
I have an interactive report with an image column displayed with a case statement (below)
CASE
WHEN APP.RENEWAL_DATE < SYSDATE
THEN <--img src="#IMAGE_PREFIX#FNDCANCE.gif"-->
WHEN APP.RENEWAL_DATE > SYSDATE
THEN <--img src="#IMAGE_PREFIX#Fndokay1.gif"-->
ELSE <--img src="#IMAGE_PREFIX#wwv_small_help.gif"-->
END CRB_Valid,
when i download this for printing (as pdf / xls / rtf) i just get the <--img src="#IMAGE_PREFIX#FNDCANCE.gif"--> text in the report column. i assume this is to do with the URL being outside of an APEX app but im no HTML boffin can anyone tell me how i reference the image so it shows up on the reports? or is there a better way of acheiving the above?
- SolHi,
You can use v('IMAGE_PREFIX') in your SQL statement:
CASE
WHEN APP.RENEWAL_DATE < SYSDATE
THEN '<img src="' || v('IMAGE_PREFIX') || 'FNDCANCE.gif">'
WHEN APP.RENEWAL_DATE > SYSDATE
THEN '<img src="' || v('IMAGE_PREFIX') || 'Fndokay1.gif">'
ELSE '<img src="' || v('IMAGE_PREFIX') || 'wwv_small_help.gif">'
END CRB_Valid,Andy -
Display BLOB (image) column in (interactive) report
Hi,
I have a field called "picture" in my table "details" which is of type BLOB. i also have a field for "MIMETYPE" and "filename"
i additionally have a "name" and "description" columns which i need to display along with the picture as columns in a report (preferably interactive).
i have also modified the BLOB display format as per
http://www.oracle.com/webfolder/technetwork/tutorials/obe/db/apex/r31/apex31nf/apex31blob.htm
what i am missing is the correct query. if possible, i would like to control the size of the picture rendered within the report like say 40*50.
I have also referred to the thread
APEX 3.1 Display BLOB Image
But i don't know how to place the
dbms_lob.getlength("BLOB_CONTENT") as "BLOB_CONTENT"
in my query.
The above also makes the report column as of type "number". is this expected?
Any help would be much appreciated.
Regards,
RamakrishnanYou haven't actually said what the problem is?
>
I have a field called "picture" in my table "details" which is of type BLOB. i also have a field for "MIMETYPE" and "filename"
i additionally have a "name" and "description" columns which i need to display along with the picture as columns in a report (preferably interactive).
i have also modified the BLOB display format as per
http://www.oracle.com/webfolder/technetwork/tutorials/obe/db/apex/r31/apex31nf/apex31blob.htm
what i am missing is the correct query.
I have also referred to the thread
APEX 3.1 Display BLOB Image
But i don't know how to place the
dbms_lob.getlength("BLOB_CONTENT") as "BLOB_CONTENT"
>
Something like:
select
name
, description
, dbms_lob.getlength(picture) picture
from
details
if possible, i would like to control the size of the picture rendered within the report like say 40*50.For images close to this size it's easy to do this for declarative BLOB images in interactive reports using CSS. Add a style sheet with:
.apexir_WORKSHEET_DATA td[headers="PICTURE"] img {
display: block;
width: 40px;
border: 1px solid #999;
padding: 4px;
background: #f6f6f6;
}where the <tt>PICTURE</tt> value in the attribute selector is the table header ID of the image column. Setting only one dimension (in this case the width) scales the image with the correct aspect ratio. (The border, padding and background properties are just eye candy...)
However, scaling large images in the browser this way is a huge waste of bandwidth and produces poorer quality images than creating proper scaled down versions using image tools. For improved performance and image quality, and where you require image-specific scaling you can use the database ORDImage object to produce thumbnail and preview versions automatically, as described in this blog post. -
Interactive Report - Display New/Changed Columns
Hi,
when I add or change a column in Interactive Reports, APEX doesn't show me the new column automatically.
Everytime the user log in, he has to go on "Actions" and "Select Columns" manually, otherwise the new/changed column won't be displayed.
How can I do that the column is displayed automatically after login?
I am using APEX 4.0.2.00.07.
Regards,
MarcEither you, as a Developer, can save the report as Public.
Or an aithorized user can save the report as a General/Shared Report.
Or the user can save the report as a Private one.
Pick the columns you/user wants to see. Then [Action -> Save] -
Interactive report conditional display of link column - apex 4
I create an interactive report
select object_id,
object_name,
case
when mod(rownum, 2) = 0
then 'block'
else 'none'
end display_link
from user_objects
where rownum <= 10in the Link Column for the report I selected one of the edit icons and put the following in the link attributes
style="display:#DISPLAY_LINK#"I also edited the object_id and set the Column Link and selected an edit icon and put the same style in the link attributes.
The link under the column displays correctly but the link for the report does not seem to substitute the #DISPLAY_LINK# from the report. Any Ideas?Here's how I've done this:
SELECT ORG_ID,
CLEARER_NAME,
LEGAL_NAME,
MARGINING_ACCOUNT,
RULE_GROUP_DESCR,
VIOLATION_COLOR,
VIOLATION_LEVEL,
CASE MARGIN_IND
WHEN 'Y' THEN ' '
ELSE '<a href="#" title="Ignore This Alert"><img src="/i/ice/images/hide.png" alt="Ignore"></a>'
END AS IGNORE_LINK,
....This takes care of either showing (or not showing) the link.
IN order to process when it is present, not that the address is "#" This will cause your cursor to change to a hand (or whatever your pointer is) when the mouse floats over the link. The actual transfer to the next page, I handle with jQuery/JavaScript.
Create a Dynamic Action.
Event: Click
Selector Type: jQuery Selector
jQuery Selector: 'aalt'
Event Scope: Live
(note that the jQuery Selector is finding the alt attribute that I set on my link in the SELECT above . Tweak as needed.
This "Action" for this DA will be to "execute JavaScript code"
Normally, I would set some values into Page Items and then create a branch to pass this values to the next page. I am doing the same thing in the following code. I am getting the values off of the row wherein the user clicked on the link. I am setting these values from the row into the page item values. Then, I am submitting the page. All the "htmldb_Get" business is just stuff that I have to do to get the page item values into the session (so that I can pass them to the next page).
var clickedRow = this.triggeringElement.parentNode.parentNode.parentNode;
var ruleGroupDescr = $(clickedRow).children('td[headers="RULE_GROUP_DESCR"]').html();
var ajaxRequest = new htmldb_Get(null, $x('pFlowId').value, null, 0);
gReturn = ajaxRequest.get();
$s('P31_RULE_GROUP_DESCR', ruleGroupDescr );
ajaxRequest = null;
var clearerName = $(clickedRow).children('td[headers="CLEARER_NAME"]').html();
var ajaxRequest = new htmldb_Get(null, $x('pFlowId').value, null, 0);
gReturn = ajaxRequest.get();
$s('P31_CLEARER_NAME', clearerName );
ajaxRequest = null;
apex.submit("IGNORE");Finally, just create a branch to the next page and set the items on the next page to the ones on this page that are being set in the above script. Note that in my example, I have set the request to "Ignore" when I submitted; so, I set the condition of my branch to be Request = IGNORE.
Hope this helps,
-Joe
Maybe you are looking for
-
None is not shown as payment option
I work for a business and when one of our users get a new iPhone we set them up with it and help them create an Apple ID so they can use the App Store. Lately, I tried creating the ID for someone on the Apple ID website instead of through the iPhone
-
HP LaserJet P1102w & Mountain Lion Wireless
I just bought a brand new HP LaserJet P1102w and cannot connect it via wireless to my Mac at all. I'm running Mac OS 10.8 with the latest software updates. I have already downloaded and installed the latest software and firmware directly from the HP
-
I am unable to use an external microphone on my MacBook Pro (17-inch Late 2008)
I have a dilemma. I wanted to use Skype on my MacBook Pro as I have before (successfully) but I have a new headset so I decided to plug it in and use it. I plugged the green headphone jack into the headphone jack on the side of the computer and did
-
HT2470 I need to transfer my photo folder to my external drive?
Mark this discussion as a Question - this encourages people to answer for points and helps you track ans
-
Is it possible to create a planned order without profit center?
Dear All, We would like to create a dummy planned order which is not converted to production order. So, we don't want to register material master fields as much as possible. When we select work scheduling view in a material master, the error occurs.