Display is dark. Its is turned all the way up in settings? how do I fix it?

After the latest update. My daughters Ipod nano won't light up. In the settings, its turned up all the way. How can I fix it without a factory reset. She will loss all her music and movies.

Try resetting it and check for solutions in the "More Like This" section over in the right column.
It would be helpful if you would tell us which model iPod Nano you have?

Similar Messages

  • HT201210 the screen on my ipod touch will only show the apple icon it will not turn all the way on

    the screen on my ipod touch only shows the apple logo.it will not shut off or turn all the way on and when plugged into itunes it will not allow the newest update

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • I can't hear any sound from my macbook. It's not on mute and the volume is turned all the way up, I can't hear any sound from my macbook. It's not on mute and the volume is turned all the way up

    I can't hear any sound from my macbook. It's not on mute and the volume is turned all the way up, I can't hear any sound from my macbook. It's not on mute and the volume is turned all the way up. Any ideas?

    Go step by step and test.
    1. System Preference > Sound > Output > Internal Speakers
        Highlight  Internal Speakers.
        Make sure that Mute is not enabled.
    2.Plug in and  remove the headphone.
        If you see red light in the headphone port, plug the headphone
        in and out of the port 5 or 6 times to flip the microswitch inside.
        Sound output may be stuck in the digital mode.
    3. Reset PRAM.  http://support.apple.com/kb/PH4405
    4. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    5. Applications > Utilities > Audio MIDI Setup
        Audio Devices window
        Side Bar
        Click the Built-in Output.
        Under Mute any of the boxes checked? If so, uncheck it.

  • IPad air keyboard  makes sound when volume is turned all the way down

    My iPad air's keyboard makes noise, even when the volume is turned all the way down. Is this normal? If so how can I turn off the keyboard typing noise without disabling entirely.

    Aloha Raptorcheese, Good news, if you have you have change with buttons turned on you can control the keyboard volume with the normal volume control. No need to go back to settings all the time.

  • HT1937 my receiver volume (5s) is very low even when turned all the way up. is there a setting to correct?

    my receiver volume (5s) is very low even when turned all the way up. is there a setting to correct?

    Hello dreuer
    Try out some of the troubleshooting steps in the article below, it will go into checking Bluetooth connections as well as restarting your iPhone.
    iPhone: Receiver and call audio quality issues
    http://support.apple.com/kb/ts5196
    Regards,
    -Norm G.

  • Why is my iTunes volume turned all the way down every time I launch the program?

    Everytime I launch iTunes I get a warning and my iTunes volume is volume is turned all the way down. How do I fix this?

    This worked for me:
    Close iTunes
    Open Finder and navigateto: Users>YourAccountName>Library>Preferences>com.apple.iTunes.plist
    Move that file to the desktop
    Launch iTunes (which will create a new prefs file)
    If the problem is now fixed, move that prefs file from the desktop to the Trash. There might be some personal settings in iTunes you will need to re-do.

  • My iPad 1 does not make any of the sounds (key clicking, etc) I have directed it to despite having volume turned all the way up...any thoughts?

    my iPad 1 does not make any of the sounds (key clicking, etc) I have directed it to despite having volume turned all the way up...any thoughts?

    Check to see if the "silent" switch is turned on. This is either the hardware switch next to the volume control or a software switch on the "recent apps" tray depending on how you have your iPad configured (Settings > General).
    Too see the software switch on the "recent apps" tray double-click the Home button and swipe the tray to the right.

  • ITunes crashes upon opening after telling me the volume is turned all the way down....

    After updating to iTunes 11.1.3, everything was fine initially. Suddenly though, as of yesterday, my iTunes decided that it was going to turn off it's own program-controlled volume. It was kind enough to alert me to this, and I closed the warning about it and set about raising the volume, wondering why I had turned it down in the first place. At this point though, iTunes had stopped responding at all. So, I forced it to quit, reopened it, and once again it alerted me to the fact that the volume was turned all the way off. Okay, I said, told it not to warn me again, closed the warning and then there was a new alert about the fact that my previous forced closure of iTunes resulted in extra windows being closed that it was now asking me if I wanted to reopen. I can't even click on the "Don't Reopen" button, as the program itself once again stops responding after I acknowledge the first warning about the lack of volume. Anytime I open iTunes it does this (repeated without fail, several dozen times now...). Once iTunes is open, none of the options in the Help or Edit or File or any of those buttons in the taskbar are actually clickable, since I can't do anything before acknowledging the alert about the volume, after which it inevitably stops responding. Tried restarting the Mac to no avail. Tried downloading and installing a fresh iTunes hoping it might repair the damaged files, to no avail. I can't actually remove the current iTunes from the computer since apparently it is 'essential to OS X'. Not really sure how to go about fixing this issue.....could anybody shed some light on this?
    Thanks!

    In that case I would reinstall your itunes. It will just install over the top of the existing program. As a precaution it is usually wise to make a copy(Backup) of your itunes folder when installing itunes. It should not affect anything but you never know
    You can find the install package for itunes 11 here
    http://www.apple.com/itunes/download/

  • HT1386 my phone will no longer turn all the way on or sinc... It just says activation required.

    My I phone will no longer turn on all the way or conect with my computer all the way to sinc.... keeps saying "activation required"? How do I activate?

    The only time I have ever seen that is when my SIM card is out of my phone. Try opening the sim card tray and then replacing it after a minute. Use a paperclip to pop the door open on the side of the phone (if it is a 4 or 4s) or on top (if 3GS) and see if that changes the alert message. Check back with status if that doesn't help. You can also trying a full restore by plugging it into your computer and opening iTunes. When it recognizes the phone click on the phone name in the left menu and hit restore. This will erase the phone but if you have a backup you can restore from that after it resets the phone or you can set it up as a new phone and start from scratch. Good luck, let me know if this helps.

  • HT3576 Can you get sound notifications for mail and iMessage with the new iPad. Under general sounds I have a sound selected for both of those. My volume is turned all the way up but I still don't get sound notifications with these apps. Suggestions?

    I have sound turned on under general> sounds. The volume is all the way up and I can hear it when i adjust it. However under notifications sound is not an option for mail or iMessage. Just badges and alerts. Both of which are on. I would really like to hear my notifications. Any suggestions.

    1. Double-click the Home button and swipe Task Bar to the right
    2. Check the volume and mute settings
    http://i1224.photobucket.com/albums/ee374/Diavonex/6d3191ba.jpg

  • I recently got a used macbook pro, and the backlight on the keyboard doesn't light up all the way, I was wondering how much it would cost to get it fixed..

    MacBook pro keyboard doesn't light up all the way, I don't know why and I was wondering how much it could cost for repairs.

    If there is Warranty or AppleCare it will be covered at Apple Store. If no coverage, Apple does not repair iPhone 4 Power/Lock Button, for $149 they will give you a perfect replacement iPhone 4 exactly like yours with a 90 day Warranty. For the time being or as a permanent solution you can use perfect Virtual Lock Button. Tap Settings App > General > Accessibility > Assistive Touch > ON > tap the new small white screen button > Device > Lock. You can even use this button to turn the iPhone OFF. To turn iPhone ON, connect to power, ie charger or USB port of computer.

  • I bought a usb microphone (blue snowball). I can't hear any sound from it. The MIDI master volume is turned all the way down, and I can't turn it up because it's frozen/locked. Please help!!! Not very tech savvy, been at this for hours and desperate :(

    I've been trying to fix this problem, seems like it would be simple, but apparently it is not. I just want to turn up the master volume control under my input tab in MIDI audio devices so I can use my blueball microphone.
    This image above is what I'm currently dealing with. I put a red box around the volume control I want to use. That is the one I can't turn up because it is locked/frozen.
    Please make steps as simple as possible!
    Thanks

    You should have gotten a user manual.  If the manual is of no help, contact the manufacturer. 

  • I just sync'd my iPod Nano for the first time. All the audiobooks appear to have been loaded but I cannot hear anything during playback. The volume is turned all the way up. My headphones work when plugged into a different unit. What's next?

    I just sync'd my brand new ipod Nano with my laptop PC running Windows 7, and loaded all my audiobooks. They show up on the Nano's screen, but when I select one I hear nothing. The earphones work fine when connected to another unit. What's next?

    I'm ok with having to resync everything once she gets home but it concerned me when you said it would, again, wipe everything once I plugged it in here. I don't care about having to reload music, contacts, & apps from here, but I would rather not lose all the pictures that she took while she was gone. If we did decide to go the whole start-over-from-scratch route on her end while she is there, could the loss of pictures be adverted if she created a backup of her phone, copied the backup to a USB drive, & brought the backup file home with her so I could restore it from here? When I plug my phone into another computer, I can open it through My Computer & copy the pictures; could I do that when she gets home before I allow iTunes to open & wipe everything again?
    I guess the other option would be to just have her just copy all of the pictures onto a USB drive before she comes home, I'm just curious if it's possible to restore everything if she just brings the backup file home.
    Thanks again for taking the time to helping me.

  • HT4110 my brightness on screen is fading even though turned all the way up

    does anyne know how I can fix this or do I need to take to a service dept.?
    Thanks

    Hello dreuer
    Try out some of the troubleshooting steps in the article below, it will go into checking Bluetooth connections as well as restarting your iPhone.
    iPhone: Receiver and call audio quality issues
    http://support.apple.com/kb/ts5196
    Regards,
    -Norm G.

  • Just did a sync and update after about a year and a half...all my contacts from the last 2 yrs are gone as well as texts. and an old email account and all the contacts are showing up. how can i fix this?

    Just did a sync on my phone after 2yrs. all my contacts are gone and so are the texts. also old contacts from a former email address are in there now. how can i fix this?

    you can't fix this bcz after 2 year u sync your mob now everything gone before and after the sync

Maybe you are looking for

  • How to look at my bill on a closed account?

    I left verizon to anothercarrier last month. i called o close my service and asked what my bill would be. they said they would calulate it and send me the bill. i tried to go online or into the app to see the bill but everything was closed. to my sur

  • Bt as a whole are a disgrace to humanity

    every single day i check here to see the latest developments in the ongoing hh5 problem. so many people with the exact same problem that has nothing to do with their personal settings. every day the same response: it's not our fault we fixed everythi

  • [solved] Can't get TLP to work

    I set up TLP, I enabled and run the service, but it has no effect at all, even though checking service status tells me it is running fine. EDIT: Turns out I didn't have pm-utils, which for some strange reason is not a dependency of this package. Last

  • Importing a csv file into addressbook

    So I did a search & found this question has come up quite often, but with the person having a slightly different problem, so here goes. I am trying to import a csv file into address book, when I go import -> text tile it comes up like it should do an

  • Data Modeler - can't create a spatial indexes

    Good day, colleagues! I have a 584 release of Dala Modeler. Here is the cite from Oracle SQL Developer Data Modeler Guide: "3.82 Spatial Definition Properties Coordinate System ID: Oracle Spatial SRID value. ... +Create Spatial Index: Controls whethe