Display is not visiable

Hi My new nokia 925 is just 1 month old, and already I am having issues with it. Even though my phone is switched on, display is not up. I can hear calls coming in but can't see any thing. Dont know what to do?

Follow THIS guide if nothing works take it back to point of purchase or a nokia care point,
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Similar Messages

Installed Premiere Pro CS4 but video display does not work?

I just got my copy of CS$. After installing Premiere I found two things that seem very wrong:
1) video display does not work, not even the little playback viewer next to improted film clips located on the project / sequence window. Audio works fine.
2) the UI is way too slow for my big beefy system.
My pc is a dual boot Vista-32 and XP system with 4GB of memory installed and nvidia geforce 280 graphics board with plenty of GPU power. The CS4 is installed on the Vista-32 partition. My windows XP partition on the same PC with Premiere CS2 works great and real fast.
Any ideas how to solve this CS4 install issue?
Ron

I would like to thank Dan, Hunt, and Haram:
The problem is now very clear to me. The problem only shows up with video footage imported into PP CS4 encoded with "MS Video 1" codec. So this seems to be a bug. The codec is very clearly called out and supported within various menues but video with this codec just will not play in any monitor or preview window. In addition the entire product looks horrible with respect to performance while PP CS4 trys its best to play the video. Audio will start playing after about 30 seconds. And once in awhile part of video shows up at the wrong magnification before blanking out again.
My suggestion to the Adobe team: fix the bug and add some sample footage to the next release so new installations can test their systems with known footage.
My PC is brand new with the following "beefy" components:
Motherboard
nForce 790i SLI FTW
Features:
3x PCI Express x16 graphics support
PCI Express 2.0
NVIDIA SLI-Ready (requires multiple NVIDIA GeForce GPUs)
DDR3-2000 SLI-Ready memory w/ ERP 2.0 (requires select third party system memory)
Overclocking tools
NVIDIA MediaSheild w/ 9 SATA 3 Gb/sec ports
ESA Certified
NVIDIA DualNet and FirstPacket Ethernet technology
Registered
CPU: Intel Core 2 Quad Q9550
S-Spec: SLAWQ
Ver: E36105-001
Product Code: BX80569Q9550
Made in Malaysia
Pack Date: 09/04/08
Features:
Freq.: 2.83 GHz
L2 Cache: 12 MHz Cache
FSB: 1333 MHz (MT/s)
Core: 45nm
Code named: Yorkfield
Power:95W
Socket: LGA775
Cooling: Liquid Cooled
NVIDIAGeForce GTX 280 SC graphics card
Features:
1 GB of onboard memory
Full Microsoft DirectX 10
NVIDIA 2-way and 3-way SLI Ready
NVIDIA PureVideo HD technology
NVIDIA PhysX Ready
NVIDI CUDA technology
PCI Express 2.0 support
Dual-link HDCP
OpenGL 2.1 Capaple
Output: DVI (2 dual-link), HDTV
Western Digital
2 WD VelociRaptor 300 GB SATA Hard Drives configured as Raid 0
Features:
10,000 RPM, 3 Gb/sec transfer rate
RAM Memory , Corsair 4 GB (2 x 2 GB) 1333 MHz DDR3
p/n: TW3X4G1333C9DHX G
product: CM3X2048-1333C9DHX
Features:
XMS3 DHX Dual-Path 'heat xchange'
2048 x 2 MB
1333 MHz
Latency 9-9-9-24-2T
1.6V ver3.2

Satellite A210 1AP - The display is not turning on

I had a problem about a mounth ago with my Toshiba Satellite A210-1AP, just once the display did not turn on. Computer was working, all lights were on. That light that shows reading from HDD was blinking, working as normal, but with display still turned off. So I turn it off, and next time I tried it was warking as usual, with display turned on, he asked if i want to start windows normaly, or in safe mode (like when it is restarted unnaturally). Then worked normaly for few days, then it happened again. At that time I couldn't go to the service (computer was on warranty, and how to prove that something happens sometimes if it do not happened there). So I continued to use it, and as time passes by the problem was more often. Then I decided to go to service.
Guy in the service said that the problem is motherboard, so he changed motherboard, and it took about month for him to do it, and then when I called he said me that it isn't working still. And maybe he has to change all parts, display, graphical card is maybe problem, that he didn't saw problem like that...
So my question is do you know what the problem could be? And the second question is can I demand from him, as it passed 30 days to give me new computer instead changeing all parts on it?
Thanks,
Nikola

Thanks for answers.
I have my notebook now back, but there is another question, you said that video card is on board on A210-1AP? Because tehnician said taht he ordered new one, after replacement of mother board...
I also doubt that he lied me with some more things, so I would like to know some things. Is there any toshiba policy that the broken parts have to be send back to toshiba? Because in law there is one paragraphf that sais that he have to give me back also broken parts.
And one more.
Do changed parts have extended waranty? For example I bougth laptor before 1,5 year, so he changed motherboard. Do the motherboard have waranty 2 more years or just half year as other non changed parts.
There is also paragraph about it in serbian law, but tehnician said that I don't have more waranty, and if it dies again (hopefuly not) that I can call inspection...

Mac Mini + A1038 Cinema Display does not work

Hi,
I have a 2009 model Mac Mini with mini-dvi and mini-display port's on the rear. I can connect any of my DVI based monitors to the mac mini using either the mini-dvi to dvi cable or the mini-displayport to dvi cable. All monitors except for the A1038 model Apple Cinema Display.
The cinema display works with 3 other computers with DVI ports, turns right on and is detected right away. When plugged into the mini it does nothing. Sometimes I can get it to work with the mini-dvi to dvi adapter but that is sporadic.
This is the same behavior with a 2009 model mac book pro and macbook. Using the mini-displayport to dvi cable the cinema display does not work but 3 other monitors do.
So my question is, why does apple hardware only work with non-apple hardware?

Is the A1038 the old, plastic Cinema Display that doesn't have a power cord or power supply? It only has a video cable with the special ADC on it? If that's the case, it needs this to run from a newer Mac:
http://store.apple.com/us/product/M8661LL/B

17" LCD Cinema Display does not work on G4 Tower with ATI 9000

Hi,
I have a G4 Tower with the original AGP ATI Radeon 9000B video card. My friend gave me this unit just recently but not the original monitor. Well after he got his new 30" Cinema Display he gave me the original 17"LCD Cinema Display. I was so happy, plugged it into the card and fired up the CPU but nothing! just blank! It is not getting any power for the USB ports or anything. My buddy says the monitor was checked before I picked it up. I yanked the Video card out and put it back in, inside the CPU was clean as was the card, put it back together and still nothing. The VGA monitor I have is connected via adapter to the other input and works fine. I tried doing display settings and the Cinema is not even detected. Is the Video card fried on the digital side?
Do I need a new one?
Here is the info on the CPU:
Machine Model: Power Mac G4 (AGP graphics)
CPU Type: PowerPC G4 (2.9)
Number Of CPUs: 1
CPU Speed: 400 MHz
L2 Cache (per CPU): 1 MB
Memory: 1.5 GB
Bus Speed: 100 MHz
Boot ROM Version: 4.2.8f1
Serial Number: XB0120xxxxx
Any help wold be appreciated.

Hi MFG,
Welcome to the discussions.
The G4 AGP Graphics model originally shipped with an ATY Rage 128 graphics card. The ATI Radeon 9000 graphics card that is installed in your G4 is not the original card.
The ATI Radeon 9000 comes with a native ADC port (which you are trying to use). This port is only fully functional if the computer is ADC enabled. Your model of G4 is, unfortunately, not ADC enabled.
You can confirm this by opening the computer and having a look at the AGP slot (where the graphics card is installed). In ADC enabled Macs, there is an extra slot at one end of the AGP slot to accomodate an "extra leg" that the ADC graphics cards (such as the ATI 9000) have. This extra leg supplies the power and USB feed. You'll probably find this extra leg with no slot for it to go into.
What this means is that you are not getting power and USB feed through the ADC port to your display.
If you want to get the 17" ADC Apple LCD display working off this card (it's definitely the LCD display and not the CRT display, please confirm), you will need to use a DVI to ADC adaptor such as this one:
http://www.drbott.com/prod/db.lasso?code=0111-DVAD
and run it off the DVI output.
You can run your VGA screen at the same time (if you want to) off the ADC output by using this adaptor:
http://www.drbott.com/prod/db.lasso?code=0117-ADCV
This will work off the ADC port because, although the ADC port is not getting USB or power feed, it's still getting the DVI feed (which is what this adaptor needs).
Cheers!
Karl

DVI to ADC adapter STudio display will not power on when used with Mac mini

I have a Mac mini and I just purchased a used apple 17" CRT studio display. I bought the DVI to ADC Adapter as recommended by my Apple store. When I hook everything up (I have checked and redone this two times) The power light will come on for about a second when presses. When the mini powers up there is a blank dark screen. I would appreciate any ideas on this. thanks!
Mac mini Mac OS X (10.4.1)

Hi
unfortunately I think the Apple store have sold you the wrong item.
I'm almost certain the DVI to ADC adapter only works with ADC based flat panel displays. DVI ports can output digital or analogue signals (or a combination of the two). The adapter seems to provide digital, which is why it works with the LCD displays, but not analogue, which is why it doesn't work with the CRT displays.
Confusingly Apple did a 17" Studio display both as a CRT and LCD.
Dr. Bott do a similar adapter but they explicitly state it's not compatible with the 17" CRT.
Unfortunately I'm not sure there's a solution, as the display has an ADC connector yet I'm not aware of any adapters available that will work.

GS70 miniDP/mini Display Port not working

Hi forum,
I recently got a GS70 with 860m graphics that runs win8.1. I can use the HDMI interface with no problems with various monitors. The displays are detected both by the intel software as well as the "change screen resolution" config of windows.
When I plug a monitor into the miniDP ports however the displays are not detected by the system. I tried this with a 27" Samsung as well as a 30" Dell U3011. I used a miniDP2HDMI cable, a miniDP2DP cable and an active miniDP2DVI adapter, none of them works. I am using the latest Nvidia drivers, they have been updated online through the nvidia experience stuff.
I tried to troubleshoot this by using an Ubuntu live CD with the same results. HDMI works out of the box as soon as I plug a cable in. Nothing happens when I use the miniDP cable though.
I also noticed that one cable (miniDP2HDMI) I can put fully into the miniDP port while the other one(miniDp2DP) sticks out 3-4mm and does not seem to go into further even with force. They look alike and the packaging clearly says "miniDP..." though.
How can I fix this?
Thanks.

Quote from: johannes.haase on 09-January-15, 20:16:14
Hi forum,
I recently got a GS70 with 860m graphics that runs win8.1. I can use the HDMI interface with no problems with various monitors. The displays are detected both by the intel software as well as the "change screen resolution" config of windows.
When I plug a monitor into the miniDP ports however the displays are not detected by the system. I tried this with a 27" Samsung as well as a 30" Dell U3011. I used a miniDP2HDMI cable, a miniDP2DP cable and an active miniDP2DVI adapter, none of them works. I am using the latest Nvidia drivers, they have been updated online through the nvidia experience stuff.
I tried to troubleshoot this by using an Ubuntu live CD with the same results. HDMI works out of the box as soon as I plug a cable in. Nothing happens when I use the miniDP cable though.
I also noticed that one cable (miniDP2HDMI) I can put fully into the miniDP port while the other one(miniDp2DP) sticks out 3-4mm and does not seem to go into further even with force. They look alike and the packaging clearly says "miniDP..." though.
How can I fix this?
Thanks.
have you tried to press fn + F2 button? some times some displays wont give signal untill you press that button and then laptop one will either go black or go off then on again and then external monitor will wake up and give picture so try it if you havent and then return back to us if it works or not.

Multi-touch display is not functioning as normal

multi-touch display is not functioning as normal on the right half of the screen....

Hi James,
Thx for the quick reply...
I have already tried most of these troubleshooting steps but no go....
Also, when you tap or use only the right half of the screen, the touch display is inconsistent and makes a wierd sound [ like a hollow tub or something ] and it's not a cosmetic issue...
----Apple store / Authorized Service Center is still working on this ongoing issue with no results and still not confirming for the iphone replacement...Thnx..

My ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix

my ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix, other than take it to apple.
thanks!

The wish list only works on apps you have to pay for. To get it tap the icon of the app you want to save. After it opens at the upper right corner is a box with a arrow. Tap that then tap add to wish list list in the box that opens.

Display name not getting generated When creating user thorugh GTC

We are using GTC flat file as a trusted source. We see that display name not getting generated. And same thing happening when creating a new GTC mapping.
previously when we ran with few test user got created with display name through GTC flat file , Suddenly we see this issue display name not getting generated through flat file recon.
Manually user creation has no issues.
Please let me know if you have any idea about this issue.

Don't use GTC... GTC is inflexible and buggy technology... Nothing guaranteed... Rather create your own custom trusted recon code...
For more details
26 Known Issues of Generic Technology Connectors
http://docs.oracle.com/cd/E10391_01/doc.910/e10360/issues.htm

HT1338 my MAc Book PRO 13" Retina display will not update. It crashes every time I try to do an update. I have sent in the information on each update but so far nothing back from Apple.

my MAc Book PRO 13" Retina display will not update. It crashes every time I try to do an update. I have sent in the information on each update but so far nothing back from Apple. Also it does not matter what I am trying to update, the operating system, and application, each caused the same crash. This mac book is less than a month old.

That is the highest you will be able to go with 3g. You need 3gs or 4 to go any higher (multi processors and more memory needed). Version 4.2.1 marks the end of your updates for that device.

TS5148 When I try to play a movie on Netflix from my IPad, I get a pop up saying: Cannot play video. "The connected display is not supported".

When I try to play a movie on Netflix from my IPad, I get a pop up saying: Cannot play video. "The connected display is not supported". I have updated my Apple TV, tried restarting it, and have tried using my IPod Touch all without any luck. This display has worked in the past. This just happen a couple days ago.
Any ideas out there?

I have been successfully using my Apple TV with my iPad2 to access Netflix through airplay (mirroring) and suddenly it won't work. It says "the connected display is not supported" What's up?
Also when I try to stream Netflix through my Apple TV menu on my television it says "An error occurred loading this content. Try again later. But trying again later doesn't work any better.
Now the only way I can watch Netflix is using my small iPad screen. It appears the problem is with streaming Netflix through my Apple TV

TS3999 ipad calendar: events synch from mac to ipad in month display but not week display

ipad calendar: events synch from mac to ipad in month display but not week display

finger trouble - it's all there. tx

"Cannot play video - The Connected display is not supported" error message using Netflix 5.0.2 on my iPad

I'm running iOS 7.0.3 on my iPhone 4S and iPad (3rd gen) and have just upgraded to the current version of the Neflix app available in the Canadian App Store (5.0.2).
Although all other apps I've tried (e.g. Podcast, VLC) are able to properly output video & audio directly to my TV using the HDMI adapter (i.e. NOT via an Apple TV), the Netflix app pops up the error message "Cannot play video - The connected display is not supported". If I start a video and then plug the HDMI cable in, it will play for a few seconds and then halt with the same error message.
Netflix & Apple were supposed to have been working together to fix the previous issue with this scenario which was causing audio to be output but no video. The current Netflix app update was released yesterday and seems to have taken a step backward.
When I contacted Netflix support, they indicated that they have done whatever can be done from their side and this is now Apple's issue.
Any ideas?
Thanks!
Kiron

Hello all,
I have an iPad 2 16GB with iOS 7.0.3 and Netflix version 5.0.2. I cannot watch netflix on an External LCD monitor that I have through VGA out. I use bluetooth speakers, so the AirPlay is going to that for Audio. Before this update, this combo worked without an issue.
So as of Friday Nov. 8/2013, I contacted Netflix support, and they said they fixed the problem on their end, and the fix is on the Apple side of things, and to contact Apple support.
So, I contacted Apple support, and the first person I spoke to said I would have to agree to pay a $35 fee for 30 days of support to this problem since my unit is out of warranty. I said this isn't a hardware issue, it's a software issue, and I'm not willing to pay to fix a problem you created. So I got a Senior Level advisor on the line, and she was helpful, and she's looking into the issue for me and said she'll contact me sometime on Tuesday or Wednesday (Nov. 12 or 13) to let me know of the issue.
Here's the thing: this is a combination of Netflix and iOS not working correctly with any of the Apple Authorized Dongles. This is truly a code error that some hot shot programmer had major oversight on, and their management didn't catch it either. There was no reason for Netflix to rush to get this Netflix update going until Apple sorted out the bugs in iOS 7.
Anyway, if I hear anything from Donna (the advisor), I'll post it and let you guys know. In the mean time, good luck!

Slimline s3321p display does not turn on after sleep (Win 7)

Upgraded from Vista 32 bit system to Win 7 32 bit because of lots of Vista issues. Win 7 resolved most problems but then recently, after a couple of months, display would not turn on following sleep or hibernation. Couldn't fix so did clean install of win 7 64 bit (custom instead of update) to resolve the problem. But same thing in Win 7 64. Installed the multiple MS updates. MS''s Nvidia display driver install always failed and a couple others I downloaded elsewhere failed as well. Did finally get a recent driver from nvidia's website that installed (9.18.13.697), but it didn't solve the problem. Ran the same as the older driver.
Also tried the following:
-all kinds of power setting changes
-different monitor (flatscreen TV is the normal one I use because this is my dvr/media machine)
-different RGB cable
-ran win 7 install disk to fix any OS problems
-inactivating hibernate
-checking voltage output of all power supply leads following instructions (all within normal tolerance)
-reconnecting all motherboard leads
-swapping around the two 2GB memory modules
-various system checks
-tried to install various Vista 64 bit fixes/updates from HP website, but they don't install ("don't meet minimum requirements")
-and more things I can't remember
HP doesn't seem to have any Win 7 support for this computer, so now I'm at a loss. At the moment I'm leaving the machine on all the time, but don't want to do this forever. I suppose it could be a faulty motherboard, but short of replacement, anything else to try?

Hi,
A couple of suggestions:
Check you have the latest BIOS update - 5.18 - search for sp40834.exe - often these updates improve these functions
If you are game, try just one RAM stick installed as a test, try slot 0 and 1
Lastly, try a different video cable - It's a long shot, but it could be key to the issue
Hope that these suggestions assist
regards davida
"Although I am an HP employee, I am speaking for myself and not for HP"

Display is not visiable

Similar Messages

Maybe you are looking for