Display is not working

I just apologize for my English, I'm from Russia.
My iPod is plays music, wheel is working, clicing of wheel is hearing, but display is a black or white.
As soon as I turn to him, he lit with white light and nothing else happens.
please help!
p.s. all steps at the apple.com/support is not helped me...
null

put a comment in one of the other threads, then we have one thread about the white screen of death. At the moment there are more than four.

Similar Messages

Installed Premiere Pro CS4 but video display does not work?

I just got my copy of CS$. After installing Premiere I found two things that seem very wrong:
1) video display does not work, not even the little playback viewer next to improted film clips located on the project / sequence window. Audio works fine.
2) the UI is way too slow for my big beefy system.
My pc is a dual boot Vista-32 and XP system with 4GB of memory installed and nvidia geforce 280 graphics board with plenty of GPU power. The CS4 is installed on the Vista-32 partition. My windows XP partition on the same PC with Premiere CS2 works great and real fast.
Any ideas how to solve this CS4 install issue?
Ron

I would like to thank Dan, Hunt, and Haram:
The problem is now very clear to me. The problem only shows up with video footage imported into PP CS4 encoded with "MS Video 1" codec. So this seems to be a bug. The codec is very clearly called out and supported within various menues but video with this codec just will not play in any monitor or preview window. In addition the entire product looks horrible with respect to performance while PP CS4 trys its best to play the video. Audio will start playing after about 30 seconds. And once in awhile part of video shows up at the wrong magnification before blanking out again.
My suggestion to the Adobe team: fix the bug and add some sample footage to the next release so new installations can test their systems with known footage.
My PC is brand new with the following "beefy" components:
Motherboard
nForce 790i SLI FTW
Features:
3x PCI Express x16 graphics support
PCI Express 2.0
NVIDIA SLI-Ready (requires multiple NVIDIA GeForce GPUs)
DDR3-2000 SLI-Ready memory w/ ERP 2.0 (requires select third party system memory)
Overclocking tools
NVIDIA MediaSheild w/ 9 SATA 3 Gb/sec ports
ESA Certified
NVIDIA DualNet and FirstPacket Ethernet technology
Registered
CPU: Intel Core 2 Quad Q9550
S-Spec: SLAWQ
Ver: E36105-001
Product Code: BX80569Q9550
Made in Malaysia
Pack Date: 09/04/08
Features:
Freq.: 2.83 GHz
L2 Cache: 12 MHz Cache
FSB: 1333 MHz (MT/s)
Core: 45nm
Code named: Yorkfield
Power:95W
Socket: LGA775
Cooling: Liquid Cooled
NVIDIAGeForce GTX 280 SC graphics card
Features:
1 GB of onboard memory
Full Microsoft DirectX 10
NVIDIA 2-way and 3-way SLI Ready
NVIDIA PureVideo HD technology
NVIDIA PhysX Ready
NVIDI CUDA technology
PCI Express 2.0 support
Dual-link HDCP
OpenGL 2.1 Capaple
Output: DVI (2 dual-link), HDTV
Western Digital
2 WD VelociRaptor 300 GB SATA Hard Drives configured as Raid 0
Features:
10,000 RPM, 3 Gb/sec transfer rate
RAM Memory , Corsair 4 GB (2 x 2 GB) 1333 MHz DDR3
p/n: TW3X4G1333C9DHX G
product: CM3X2048-1333C9DHX
Features:
XMS3 DHX Dual-Path 'heat xchange'
2048 x 2 MB
1333 MHz
Latency 9-9-9-24-2T
1.6V ver3.2

Mac Mini + A1038 Cinema Display does not work

Hi,
I have a 2009 model Mac Mini with mini-dvi and mini-display port's on the rear. I can connect any of my DVI based monitors to the mac mini using either the mini-dvi to dvi cable or the mini-displayport to dvi cable. All monitors except for the A1038 model Apple Cinema Display.
The cinema display works with 3 other computers with DVI ports, turns right on and is detected right away. When plugged into the mini it does nothing. Sometimes I can get it to work with the mini-dvi to dvi adapter but that is sporadic.
This is the same behavior with a 2009 model mac book pro and macbook. Using the mini-displayport to dvi cable the cinema display does not work but 3 other monitors do.
So my question is, why does apple hardware only work with non-apple hardware?

Is the A1038 the old, plastic Cinema Display that doesn't have a power cord or power supply? It only has a video cable with the special ADC on it? If that's the case, it needs this to run from a newer Mac:
http://store.apple.com/us/product/M8661LL/B

My ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix

my ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix, other than take it to apple.
thanks!

The wish list only works on apps you have to pay for. To get it tap the icon of the app you want to save. After it opens at the upper right corner is a box with a arrow. Tap that then tap add to wish list list in the box that opens.

My thunderbolt display is not working with my MBP retina 13''

Hi,
     I just received both a new macbook pro retina 13'' and a thunderbolt display. Everything was working properly yesterday but today, I have no clue why, the thunderbolt display is not working anymore.
     . the power supplier for my laptop given by the thunderbolt display is still working;
     . when I don't connect my laptop through the thunderbolt connection, I can use the usb sockets as power supplier , for my phone, for instance;
     . as soon as I plug the thunderbolt cable, the usb socket is not feeding any more my phone, whereas the screen is not displaying anything.
     . If I take a look in the system report, in the thunderbolt tab, there is "no device connected"...
I restarted plenty of time my laptop, took care to reinitialise the SMC as well as the PRAM, and nothing changed. I also disconnected the thunderbolt display, waited few minutes (and more), but nothing changed, again the black screen.
Has somebody an idea?
Thanks

which model air do you have?
try both a pram and smc reset
plug the monitor into a different electrical outlet and a different port on your Mac (if you have multiple tb ports)

HT6114 I just updated the last version of OS X Mavericks on my Mac Pro and my Thunderbolt display is not working correctly

I just updated the last version of OSX Mavericks on my MAc Pro and my thunder bolt display is not working correctly. Could you please help

Reset the NVRAM/PRAM and Reset the SMC, then try again.

My iphone 4 fell down from 3 feet height and display is not working now, phone is functioning with calls and messages etc.. except no display :( please advise me a corrective action...

my iphone 4 fell down from 3 feet height and display is not working now, phone is functioning with calls and messages etc.. except no display please advise me a corrective action...

Take it to an Apple Store and see about getting an out of warranty replacement. I believe it will run you about $150.

17" LCD Cinema Display does not work on G4 Tower with ATI 9000

Hi,
I have a G4 Tower with the original AGP ATI Radeon 9000B video card. My friend gave me this unit just recently but not the original monitor. Well after he got his new 30" Cinema Display he gave me the original 17"LCD Cinema Display. I was so happy, plugged it into the card and fired up the CPU but nothing! just blank! It is not getting any power for the USB ports or anything. My buddy says the monitor was checked before I picked it up. I yanked the Video card out and put it back in, inside the CPU was clean as was the card, put it back together and still nothing. The VGA monitor I have is connected via adapter to the other input and works fine. I tried doing display settings and the Cinema is not even detected. Is the Video card fried on the digital side?
Do I need a new one?
Here is the info on the CPU:
Machine Model: Power Mac G4 (AGP graphics)
CPU Type: PowerPC G4 (2.9)
Number Of CPUs: 1
CPU Speed: 400 MHz
L2 Cache (per CPU): 1 MB
Memory: 1.5 GB
Bus Speed: 100 MHz
Boot ROM Version: 4.2.8f1
Serial Number: XB0120xxxxx
Any help wold be appreciated.

Hi MFG,
Welcome to the discussions.
The G4 AGP Graphics model originally shipped with an ATY Rage 128 graphics card. The ATI Radeon 9000 graphics card that is installed in your G4 is not the original card.
The ATI Radeon 9000 comes with a native ADC port (which you are trying to use). This port is only fully functional if the computer is ADC enabled. Your model of G4 is, unfortunately, not ADC enabled.
You can confirm this by opening the computer and having a look at the AGP slot (where the graphics card is installed). In ADC enabled Macs, there is an extra slot at one end of the AGP slot to accomodate an "extra leg" that the ADC graphics cards (such as the ATI 9000) have. This extra leg supplies the power and USB feed. You'll probably find this extra leg with no slot for it to go into.
What this means is that you are not getting power and USB feed through the ADC port to your display.
If you want to get the 17" ADC Apple LCD display working off this card (it's definitely the LCD display and not the CRT display, please confirm), you will need to use a DVI to ADC adaptor such as this one:
http://www.drbott.com/prod/db.lasso?code=0111-DVAD
and run it off the DVI output.
You can run your VGA screen at the same time (if you want to) off the ADC output by using this adaptor:
http://www.drbott.com/prod/db.lasso?code=0117-ADCV
This will work off the ADC port because, although the ADC port is not getting USB or power feed, it's still getting the DVI feed (which is what this adaptor needs).
Cheers!
Karl

Keyboard plugs into the back of my display does not work? but when I plug the keyboard into my MacBook Pro it works fine? is it my display Monitor?

My keyboard plugs into the back of my display monitor it does not work? but when I plug the keyboard into my MacBook Pro it works fine? is it my display Monitor?

Try:
- Resetting the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Resetting network settings: Setting>General>Reset>Reset Network Settings

Target Display Mode not working iMac 27(2012) Bootcamp to iMac 27(2013)

Hi All,
I recently purchased an iMac 27" 2013 which replaced my iMac 27" 2010.
===============
PREVIOUS SETUP
===============
(1) iMac 27" 2012 - Running Windows 8.1
(2) iMac 27" 2010 - Running OS X Mavericks
(1)+(2) were connected with a Mini-Display-Port cable.
(1) was using (2) as external display while (2) was set to Target Display Mode using CMD+F2
==============
CURRENT SETUP
==============
(1) iMac 27" 2013 - Running Windows 8.1
(2) iMac 27" 2012 - Running OS X Mavericks
(1)+(2) are connected with Thunderbolt cable.
(1) can't use (2) as external display anymore becuase CMD+F2 has no effect anymore on (2) in this scenario.
If (1) and (2) are both running OS X all works as expected.
I am aware about the support hint from Apple where they state TDM is not working under Bootcamp.
And I agree, while booted into Windows Bootcamp this machine can't serve as external display. Makes sense because TDM is baked into OS X display drivers.
Anyone had the same experience and came to a soltuion?
Thanks,
Martin

"Apple has no plans to implement a client driver for Windows since there is no Thunderbolt SW stack available for Windows like there is for Display Port."
That is a little bit funny since Gigabyte and other big companies have said that 2014 is the year that they are going to implement Thunderbolt in many motherboards.
"GIGABYTE 7 series motherboards are the very first to offer fully certified dual onboard Thunderbolt™ ports. Capable of connecting up to 12 devices plus 3 digital displays simultaneously with breathtaking data transfer speeds that can transfer 1TB of data in only five minutes, GIGABYTE Thunderbolt™ motherboards offer the fastest connection interface on the desktop PC."
Have you asked Apple about that? I dont understand why Apple is crippling Thunderbolt on their devices...

GS70 miniDP/mini Display Port not working

Hi forum,
I recently got a GS70 with 860m graphics that runs win8.1. I can use the HDMI interface with no problems with various monitors. The displays are detected both by the intel software as well as the "change screen resolution" config of windows.
When I plug a monitor into the miniDP ports however the displays are not detected by the system. I tried this with a 27" Samsung as well as a 30" Dell U3011. I used a miniDP2HDMI cable, a miniDP2DP cable and an active miniDP2DVI adapter, none of them works. I am using the latest Nvidia drivers, they have been updated online through the nvidia experience stuff.
I tried to troubleshoot this by using an Ubuntu live CD with the same results. HDMI works out of the box as soon as I plug a cable in. Nothing happens when I use the miniDP cable though.
I also noticed that one cable (miniDP2HDMI) I can put fully into the miniDP port while the other one(miniDp2DP) sticks out 3-4mm and does not seem to go into further even with force. They look alike and the packaging clearly says "miniDP..." though.
How can I fix this?
Thanks.

Quote from: johannes.haase on 09-January-15, 20:16:14
Hi forum,
I recently got a GS70 with 860m graphics that runs win8.1. I can use the HDMI interface with no problems with various monitors. The displays are detected both by the intel software as well as the "change screen resolution" config of windows.
When I plug a monitor into the miniDP ports however the displays are not detected by the system. I tried this with a 27" Samsung as well as a 30" Dell U3011. I used a miniDP2HDMI cable, a miniDP2DP cable and an active miniDP2DVI adapter, none of them works. I am using the latest Nvidia drivers, they have been updated online through the nvidia experience stuff.
I tried to troubleshoot this by using an Ubuntu live CD with the same results. HDMI works out of the box as soon as I plug a cable in. Nothing happens when I use the miniDP cable though.
I also noticed that one cable (miniDP2HDMI) I can put fully into the miniDP port while the other one(miniDp2DP) sticks out 3-4mm and does not seem to go into further even with force. They look alike and the packaging clearly says "miniDP..." though.
How can I fix this?
Thanks.
have you tried to press fn + F2 button? some times some displays wont give signal untill you press that button and then laptop one will either go black or go off then on again and then external monitor will wake up and give picture so try it if you havent and then return back to us if it works or not.

Apple Mini Display Port NOT working at resolutions over 1600X1200!

Problem:
Apple Mini Display Port does NOT work at resolutions over 1600X1200 on NON Apple Cinema Displays.
That means if you own any other brand of monitor such as NEC, Lacie, etc. you will NOT get native resolution on your 24 inch monitor as it is stuck at a maximum resolution of 1600X1200.
This story was mentioned on "Macbreak Weekly" show 4-14-2009. I have since checked with a few people and it would indeed seem to be true at this point.
I REALLY hope a solution from Apple comes soon and this is not some new policy of theirs. If so, it may be the last Mac Pro I will or can ever own. The reason is I do a lot of 3D work with C4D, Vue, Modo and Photoshop CS4 so I MUST have a monitor like the high-end ones from Lacie that have 100% color gamut and Adobe RGB. I can NOT be tied down to an Apple Cinema display due to that work. At this time, it seems this means I would only get 1600X1200 resolution on that 24 inch monitor.
Has anyone else confirmed this too and if so what the heck is Apple thinking or better still going to do about it? I LOVE my Mac Pro but if they start forcing displays on us then I won't be buying another Mac, it's just that simple.

Thanks, but I think two things may be different in that setup.
1. If I understood correctly, it's a first gen without a "Mini Display Port" and
2. It was a laptop not a Mac Pro with a video card.
I think it has specifically to do with either one or both of the above combos. In particular I think it's the video card they are putting in them.
I am not sure if a new 2009 Apple laptop with a Mini Display Port connected to a NON Apple display would have an issue or work like yours does now. It would be interesting to get to the bottom of this for sure because it REALLY hurts people like myself that are into 3D design.
I will try to get back on this once I continue to find out more details.

My MBP display is not working. Need to move data to new MBP Retina.

Hello.
My 3 yr old MBP display failed (display just showing vertical and horizontal lines).
I bought a new MBP Retina today.
Genius Bar told me to simply attach FireWire, then press "T" on old MBP to boot in Target Mode.
Then, look for old MBP HD icon on new MBP Retina desktop.
I cannot find old MBP icon on desktop.
I cannot transfer data from old MBP to new MBP Retina.
Any help would be appreciated?
Ken

Genius bar told you right - you need to start your old MBP up into target mode (booting while hold down the T key) but you need to have the right FireWire cable hooked up to the machines before you boot either. What year is your old model? Does it hve FW400 or FW800?
Here are the instructions from Apple - http://support.apple.com/kb/HT1661. Take a look at it and see if it helps. Also make sure that you have the Finder set so that external and remote disks will show up on your Desktop. When the disk mounts you can either just copy over files or, if you want to transfer accounts and associated directories, use Migration Assistant in your Utilities folder to copy over the info.
Good luck - call back if it's not working.
Clinton

SSAS Display Folders not working properly after using Translations

Hi
I have a Cube with many fact tables and each having many measures.So for user convience i have created display folder for measures inside measure groups and everything was working fine.
But now i have created Translation (English(United States)) for measures,Calculated member and Dimensions and Processed.I observed that the display folders are working for calculated measures but weirdly the other measures display folder property is not
getting applied.
Please let me know if anybody came cross this and fixed.

Hi Hrehaan,
According to your description, your display folders in not working after using translation. Right?
In Analysis Services, this is a known bug. However, we have workaround for this issue.
Solution:
1. Locate your cube in Solution Explorer
2. Right click on it and choose 'View code'
3. Find the corresponding <Translation> tag - look for the Foreign name of your Calculated member
4. Below the <Caption> tag place a line with <DisplayFolder> tag. The properties within Translation tag should look like:
 <Language>1001</Language>
 <Caption>Foreign name of Calculated member</Caption>
 <DisplayFolder>Foreign name for the display folder</DisplayFolder>
5. Repeat for all your calculated members.
Please refer to the link below:
No display folder translations on the calculated members
If you have any question, please feel free to ask.
Simon Hou
TechNet Community Support

Dim Display feature not working properly

When I first got my 8330 a few days ago, the display dimming feature worked just fine. Now, with Backlight Brightness set to 100 and Backlight Timeout set to 30 seconds, when I toggle "Automatically Dim Backlight" to ON, the display dims as soon as I save the configuration. It stays dimmed continuously from that point on. To get back to normal I have to toggle the "Automatically Dim Backlight" to OFF, but then it just stays on full brightness for the 30 seconds.
Larry

Cool, thanks for the tip. I never thought of that. Ithink that should work, I'll let you know if theres anyproblems. Along a similar line of thought why is it that when I insert aUDA using a load rule, and the option for 'Allow UDA Changes' ischecked in dDimension Build Settings, why does it not overwrite theprevious UDA, instead it creates duplicates, or three or fourcopies of the UDA I'm trying to load. However if I uncheck"Allow UDA Changes" and have "Allow PropertyChanges" it will overwrite the UDA? Is that a known bugin the system?

Hcm forms : Update display button not working

Hi experts
the update display button in my form is not working . i have changed the script coding , still its not working
Regards
Priya

Hi,
Update display button is not working means is it not triggerring the back end means you are not able to see any server roundtrip,
if so check whether you have inserted webdynpro script.
if not go to your form in sfp
then goto menu select Utilities->Insert Webdynpro Script.
then you will see one script generated automatically and you can check in Hierarchy Pallete with the name ContainerFoundation_JS under Variables.
save the form and activate and then click on Update Button.
Thanks,
Madhu.

Display is not working

Similar Messages

Maybe you are looking for