Display is too big using my apple TV first generation

The display is too big for my screen. For instance I can't see the left most column of the keyboard.

Check you TV aspect ratio or zoom settings via the TV remote.

Similar Messages

  • How to restore an Apple TV first generation if it does not factory restore in recovery mode?

    The other day, while watching a movie, my Apple TV 1st gen just froze and became unresponsive to any remote control inputs. My intital attempts to just remove power and startup again failed and resulted in repeated crashes and renewed startups. On the discussions here ( Re: Apple TV 1st gen Factory Restore Problems ) I found out how to force restart by holding down the 'menu' key and the ' - ' key simultaneously. This brought me to the Recovery Menu.
    Restart from there didn't work, only resulted in coming back to the recovery menu.
    Diagnostics showed my Apple TV to be working normally.
    Factory Restore immediately brought up a failure message that factory restore was not possible!
    I tried this several times but always the same result. My trusted Apple TV first generation had mysteriously turned itself into a brick.
    After searching the web and trying all kinds of things, I figured out how to save it. Here's how:
    for reference, have a look at this webpage, but keep reading below: http://www.tweaking4all.com/home-theatre/appletv/restore-appletv-os-after-erasin g-disk/
    you need a good size USB stick, mine was 4GB
    the first method described didn't work for me, is time consuming, and you need an ethernet internet connection
    however the second method described (no network needed) worked, but not with the file posted on the website (had wrong size)
    download the disk image with the Apple OS from here: http://wiki.openelec.tv/index.php?title=Restoring_the_Apple_OS
    I downloaded the Apple OS v3.0.2 file, this proved to be working
    If you're on a Mac, download and install the ApplePi-Baker application from here: http://www.tweaking4all.com/hardware/raspberry-pi/macosx-apple-pi-baker/
    If you're not on a Mac, follow the instructions in the thread posted in 1.
    Using the ApplePi-Baker, or the other methods, restore the disk image to the USB stick; be patient, this may take a while
    Unpower your Apple TV, plug in the USB stick, power up your Apple TV
    Your Apple TV will now boot up from the USB stick and will install the latest OS on its harddrive
    When completed, remove power, remove USB stick, power up and hold down the 'menu' and ' - ' keys simulatenously, this will bring your Apple TV into Recovery mode
    Select Factory Restore
    Your Apple TV will now factory restore to OS v 3.0.2
    Note: This worked for me right away, but if not you may want to try the earlier OS version, see notes on the OpenElec Wiki page.
    Good luck, and keep enjoying your Apple TV first gen!

    Based on your suggestions, I've posted an additional article on how to do this ...
    http://www.tweaking4all.com/home-theatre/appletv/restore-appletv-os-offline-1stg en/
    Also note that I fixed the issue with the corrupted IMG files .... the files on Tweaking4All.com now work as they are supposed to.
    Thanks again James!

  • Move music to apple tv first generation?

    I have an apple tv first generation, where I'd like to move all my music to; and use it as a stand alone juke box. How do I do that?
    I've been looking forever with no clue.
    Please help

    http://www.gartside.co.uk/WinstonsTips/Remove_Content.html

  • How to config a new remote on apple tv (first generation). I have lost my remote which came with the apple tv

    How to config a new remote on apple tv (first generation). I have lost my remote which came with the apple tv.

    Do you mean you've replaced your remote and it wont work because your AppleTV is paired to your lost remote?
    If so, http://support.apple.com/kb/HT1555 has you covered.

  • My main menu does not appear when I turn on my apple tv first generation.  How do I restore my main menu?

    My main menu does not appear when I turn on my apple TV first generation, how do I restore my main menu screen?

    When I turn on, it asks for language choice, then it asks for 1080i, then it asks for network choices.  I choose my network, then it asks for my network password.  I enter the password, then it say it does not connect to network, and if I hit menu on remote, it goes back to network selection.  I can not get to main menu to see my setting for the network, because there is no menu. 

  • TS1447 I'm still receiving this error message and my Apple TV first generation still won't sync!!

    For some reason my Apple TV (first generation) won't sync with my Mac (lion os). It did it in the past and I haven't changed a thing. I also did all the trouble shooting and making sure that the Firewall was disabled, but I still get the same message. Could someone please tell me if I should be doing something else instead??

    I've only rarely seen this, but last time it was cured by restarting a combination of AppleTV, iTunes and router.
    I suspect you've tried these steps though.
    I've not had an AppleTV 1 plugged in for some weeks but my 2nd/3rd genertion units keep losing the iTunes library connection (or at least I get a spinning wheel when I try to ccess them).  Like you I don't know what's really changed (iTunes 10.6.3 maybe but I see the same with 10.6.1 on another computer).

  • HT1595 When watching a movie on Apple TV first generation, a black triangle will appear in the lower middle of the screen.   Anyone know how to resolve?

    When watching a movie on Apple TV first generation, a black triangle will appear in the lower middle of the screen.   Anyone know how to resolve?

    Hi there,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    Apple TV: Basic troubleshooting
    http://support.apple.com/kb/ht1551
    -Griff W.

  • Display is too big

    When I came in the plug on my monitor was loose and the screen was getting no power. I got the plug to power the monitor, but now the display is larger than before. Whereas a website used to fit on the screen, now it is too big and I have to scroll over to read the whole page and get the tool bar. Zoom was not activated and is set at the lowest level. How can I get the computer to go back to its compact display?

    Just out of curiosity....
    Did you ever figure this out?
    I am having a similar problem all of a sudden....
    (My daughter played a game & she must have changed my settings somehow because everything on my computer is now huge! I really have no clue how to reset it, either....)
    -Olivia-
    eMac   Mac OS X (10.4.3)  

  • Will an Infra-Red Adapter work with a macbook pro retina display so I can use the apple TV remote for presentations?

    I have always used the apple TV remote for my presentations.  I bought a retina display last year for the betterment of my presentations and now I have to stand near my computer and hit a button to change my slides where as before I used my remote.  Will a infra-red adapter work with the apple TV remote in the macbook pro retina display?  Love my computer, but very disappointed not to have a remote for presentations that does not need the internet.  Does anyone have any ideas?

    Yes, I used that and it works great if you have wireless connection.  Im looking for  a remote that worked like the apple TV remote.  My questions is, "Is there a USB infra-red remote that works with mac.  I have found this one: Keyspan EZ1 easy presenter.  It claims with works with PC and Mac and the reviews are good.  Does anyone know anything about it or if it works with retina display macs?

  • Display is too big, can't see the menu bar.

    I have a 32" tv that i connected it to my mac pro. I see te display, but it is too big. I can't see the menu bar. I've tried changing the resolution, holding control and scrolling, and changing the display size on the tv settings. Any suggestions?

    If there are no size settings on the TV that work (some TVs don't have the correct settings) see if there are Overscan or Underscan settings in the Mac's Displays system preference.

  • Backup file too big using Disk Utility

    I need to back up my 160GB Mackintosh HD on my imac OSX 10.6.3 (Snow Leopard) using disk utility. After a short period of the imaging process I get a message saying 'file too big'. What can I do to resolve the problem? My external drive is 1TB with 500GB available.
    I've tried using Time Machine but this seems to want to wipe my external disk.

    You may or may not be able to use the Disk Utility in the /Applications/Utilities/ folder to shrink the single partition and create a new one in the free space.
    (76132)

  • Display is too big for screen on start up

    When I turn on my macbook, the disply is too big, and I can't see the right 3 inches of my screen.  When I put it to sleep and bring it back up, it correctly fits on the disply.  Any ideas why this does this, and how to correct it? It has been doing this several months now.
    -Thanks!

    Ha, figured it out myself from another discussion forum finally. Thoght I'd share in case anyone else runs into this. They must have hit "Zoom" by htting the "Control" and scroll buttons at the same time..
    Resolution:
    You can zoom out by holding down the Option and Command buttons on the keyboard and, while you hold them down, pressing the - key. 

  • When firefox is loaded the display is too big for the screen & blocks out controls

    When I load Firefox Home, the display is too large to fit into the screen making it impossible to see the controls (Toolbar and log-out cross etc) This has only just happened, everything was working perfectly until about an hour ago

    Open the system menu via Alt+Space and see if you can resize that window.
    If that works then close Firefox (File > Exit/Quit) to save that setting.
    See also:
    * http://kb.mozillazine.org/Resizing_oversize_window
    If the above didn't help then see:
    * http://kb.mozillazine.org/Corrupt_localstore.rdf

  • HT1600 Turned on apple tv first generation - - -no sound

    Just started up the Apple TV to play a movie.   Had not used it in about 3 weeks - - - today - - -no audio whatsoever.
    What is the solution?   If I reset will I lose items stored on the Apple TV which is first generation.

    that is unplugged the power - - -it worked.

  • I cant move my rented movie to my apple tv first generation, i cant move my rented movie to my apple tv first generation

    i cant move my rented movie to my apple tv 1st generation. keeps saying something about firewall but i dont have any security turned on... helppp

    Kelly - If you just opened the AppleTV1, go to Settings>About and check the software version.
    Last software made was 3.02 (one of the better ones).
    If lower, update it to that, but make a note of what it shipped with in case you ever factory restore it.
    Have you configured ATV1 for LAN/internet access (ethernet by simply plugging in, wi-fi by adding wi-fi details in settings).?  If connected to internet you should be able to access YouTube on it.
    ATV1 does not use Home Sharing.  iTunes computer and AppleTV1 need to be on the same LAN.
    To set it up for itunes use you must 'register' it with iTunes with a numeric code.  Ideally the main computer used with it should be registered for 'syncing'.  Have you added a computer iTunes library under the AppleTV's Settings>Computers menu?
    You need to highlight the top entry on this page, press select which should give a numeric code.  You then go to itunes on the computer and look for an AppleTV under Devices on the left, select and enter the code.  You can then configure auto or custom syncing.
    Once configured, locate the rental in iTunes and choose to 'move it' to the AppleTV.
    AC

Maybe you are looking for

  • TV series episodes won't download

    I purchased a TV series and two of the episodes only downloaded about 30 seconds and will not complete.  Is there anyway to re-download these episodes without having to purchase them again?

  • Acrobat 7 Serial

    I need to install a copy of Acrobat 7 Pro on a different machine and don't have the case with the product key anymore. Before I uninstall it from my machine, does anyone know where I can find the full product key? The Help>About only gives 20 of the

  • 1Z1-514 Oracle Database 11g Essentials for Implementors

    Hi Guys What shall i study in order to prepare the exam 1Z1-514 Oracle Database 11g Essentials for Implementors that is in Beta? My manager have no budget to training courses.' Please help me...

  • 6822 number pad lights on all the time

    On the front number pad of my 6822 are two vertical bars. These stay lit up all the time which is killing the battery life. Its only recently started and I think maybe as a result of a mate putting in a keycode. Can you help please Thanks

  • Trying to roll back OAF-extension

    Hi! I get this stack trace when trying to run ICX-module of iProcurement. I'm trying to start from scratch, rolling back my extensions. Now it seems that the AM is looking for an old file (TeReceiveItemsTxnVO) which it should no longer need. I have d