Display issue with SAPMMC

Hello,
I got R3 system installed on windows XP system.
I use SAP mmc to bounce the R3 system.
Having said that , i am getting weired display from SAPmmc.
When i goto sapmmc and click on Sap R3 systems --> RAM >All tasks> start
then if i look under the status under "process list" , it says "database started".. it stays there for a while..then i have to stop this service then if i click on start ,R3 system is starting and i can see the progess under "process list".
Whats wrong?Am i dealing with wrong template?if so, how do i fix it?
Thanks for your help.
Thanks
Ranm

No answer

Similar Messages

SAP R/3 4.6 Installation issue with SAPMMC

Hi ALL,
Hi ,
We are installing SAP 4.6 C SR2 on AIX and Window environment.
Both CI and DB Instances are in AIX box and DI is on Windows env.
we completed our SAP R/3 4.6 c sr2 CI and DB Installations with all the Patch levels on AIX 5.3 p570.
Now we are working on SAP Application Server Installation, We Configured SAMBA on AIX Boxes and able to communicate with AIX from Windows application servers.
During the Application Installations , we followed the domain install , we got some minor issues and we fixed those, finally the installation went fine and successfully.
Now we are facing one Issue with SAPMMC- When we try to start the sap from SAPMMC the status remains in "YELLOW" with "Running but dialog Queue info unavailable" Error, Even r3trans -d working fine and we are able to logon to the SAP system through Application Server and run
transactions .
we applied note #72248 . but we still running the same problem.
I would really appreciate If any one provide some sugessions , on this issue.
Thanks in advance
Nara.
[email protected]

Hi.
I've just carried out this architecture. You have to check 2 things:
1- Are your DB software levels the same? (AIX + Windows)
2- Have you checked connectivity from client to DB server?
Regards,
Fatih Erten

Does anyone else have display issues with Intel X3100 graphics and OS X Lion?

I took the screenshot below to demonstrate one issue I have had with graphics since upgrading to OS X Lion. I use a Late 2007 MacBook with 2.0GHz Core 2 Duo and the Intel X3100 graphics chipset. I have 4GB RAM. Had to reboot to get this to correct itself. The problem is the menubar (obvious) and the desktop image is missing, replaced by the grey.
I have an external monitor connected (second image) and everything displays properly there.
Some other issues I've noticed are using Mission Control sometimes yields unpredictable results, graphically speaking, and the fullscreen apps don't always allow me to see the menubar. These all seem graphically related. Is this a hardware or software problem? Any solutions?

Here is another display issue with my machine...perhaps software rather than hardware? The icon for the rtf file "Matt Passages" is missing entirely. There is a faint rectangle present instead. The same file has an icon in the first image posted above. No change to the file since then. And two other RTFs have the icon! Odd things with Lion.

Display Issues with mini (Mid 2010) and LG L246WP

I recently purchased a new mini (Mid 2010 base model) and planned to use it with my 24" LG L246WP monitor, which is about 3 years old. The monitor has VGA, component, and HDMI inputs.
I used an HDMI-to-HDMI cable to connect the mini directly to the monitor, and the output is completely messed up. The mini recognized the monitor (titling the System Preferences > Display dialog with 'L246WP') and set it to the monitor's native resolution of 1920x1200, but on the monitor the image is cropped to what looks like a 4:3 aspect ratio and with part of the image shifted up and left so I cannot view the top menu bar or the left hand side of the desktop. The monitor's on-screen display shows 1080p in this mode.
The Display dialog also gives me an option for 1080p. I can select this and use the Underscan slider to resize the desktop output to fit on the screen, but it is still shifted left and must be resized smaller than the available display space (plus the total image is only 1080 pixels, not using the monitor's full native screen). In this mode, 1080p also shows on the monitor's on-screen display.
I tried 1024x768 to see if I could get a properly-positioned image, but the desktop was shifted just like in the 1920x1200 case and the monitor's on-screen display status still reported 1080p.
The monitor has a menu setting under an HDMI heading with "Video" and "PC" options, but changing this selection does not make a difference.
Since the monitor came out before HDMI was as widespread as it is today, it came with a DVI-to-HDMI cable, so I also tried using that cable with the HDMI-to-DVI adapter that came with the mini, but this did not make a difference either.
To prove it wasn't the HDMI cable, I connected the mini to my Samsung 6300 series 40" LED HDTV and with some tweaking of the Underscan slider the displayed image filled the screen perfectly.
I've searched the Internet and various forum threads (i.e. http://hardforum.com/showthread.php?t=1167222&page=63) seem to indicate this monitor can send a corrupted EDID that causes issues, especially with nVidia graphics drivers. On Windows you can use registry or driver hacks to override the EDID with the correct values, but on OS X this doesn't seem possible (I was hoping for a Terminal one-liner but it seems this doesn't exist). I have seen some mentions of the shareware SwitchResX (http://www.madrau.com), which looks like it gives you the option to override resolution settings, but I haven't tried this yet.
It also appears to me that the monitor is always interpreting the signal (or the mini is always sending the signal) as 1080p, even if I've set 1920x1200 in the Display dialog. I don't know if this is a defect in the monitor where it always assumes the HDMI input is a 1080p source (previous I used it with an Xbox 360 with no issues but that was 1080p HDMI), or if is a bug in the graphics drivers (or at least a lack of flexibility / miscommunication to the user trying to handle a corrupt EDID).
I asked my local Genius Bar for advice today (without bringing any hardware in) but was not told anything I didn't already know.
I'm trying to determine the best way to work through this issue. *My questions are:*
Would it make any difference if I used a Mini DisplayPort-to-DVI adapter (and then my DVI-to-HDMI cable to the monitor's HDMI input)?
What about a Mini DisplayPort-to-VGA adapter? In the past I used a 12" Powerbook (via a mini-DVI-to-VGA adapter) with this monitor and had no display issues like this, but I'd prefer to stick with a digital connection on my brand new mini.
Is SwitchResX the only practical way in OS X to override a corrupt EDID and force the mini to output a certain resolution?
Besides the various adapters and SwitchResX, is there anything else I should try before buying a new monitor?

Hello EPWilson4984.
I have been experiencing the same issues you described. Connecting my brand new Mac Mini to my Westinghouse 24”monitor (L2410NM, 1920x1200 pixel resolution) produces a very fuzzy and washed out image quality. The Mac recognizes the monitor and applies the right resolution (1920x1200), but it looks just awful. The EDID info is definitely not right.
Now, I tried your suggestion (DVI-to-HDMI), and similar suggestions from other threads, but nothing works. Nothing seems to work at all.
The main input for the monitor is HDMI, so whatever cable I use, in the end always has to connect to the monitor via HDMI. I tried all these combinations with zero success:
Mac mini -> HDMI cable -> monitor (result: fuzzy and blurry image)
Mac mini -> displayport –HDMI adapter-> HDMI cable -> monitor (result: fuzzy and blurry image)
Mac mini -> displayport –DVI adapter-> DVI-to-HDMI cable -> monitor (result: it gives me a blank screen, no image at all)
I’m running out of options. Don’t know what to do. The 24” monitor produces beautiful, crisp images when hooked to my Windows 7 PC. It looks horrible when connected to my brand new Mac Mini.
Any alternatives you may have come across? Please let me know, thank you.

LR display issue with Windows 8.1

I installed LR 5 on Windows 8.1. The install went fine. When it launched, it prompted me for my product key and I entered it. After it was complete, I exited out of LR. When I went back to launch LR, it launches but will not display. I can hover over it on the taskbar and see the application running but it will not display. I have restarted both Windows and LR and it does not resolve this. I did not have this issue with LR 3 on Windows 8.1. Has anyone else experienced this?

Hi,
For this problem, in my opinion, it would be better to contact LifeCam Cinema support for further assistance:
http://www.microsoft.com/hardware/en-us/support/contact-us
Roger Lu
TechNet Community Support

RDP Users seeing display issues with SharePoint Online Template

I originally posted this in the SharePoint Online forums, but they referred me to the RDP forums as it appears to be an issue with RDP, not SharePoint Online: Original
Post
I've been able to verify this only happens in RDP when opening a Word Template with embedded Excel table from SharePoint Online within the local Word 2010 application.

Amy,
Thank you for the input. Its rather odd, but it appears the users who are seeing this problem are connecting via RDP on laptops with widescreens, with screen resolution set much higher than the 1290x1084 we use on the terminal servers. Turning
the resolution down on the laptops did keep the table from becoming oversized and most of it running off edge of document.
However, it appears even turning down the resolution of the client machine still affects how the font is displayed in the document. The font size and type are different than the template document, they get saved that way and appear that way to other users
who do have their screen resolution set correctly. It seems there is something else going on here, thoughts?

Display issue with HTML formatted text in report builder

I am using the FCKeditor in my application to allow endusers
the ability to create formated text on reports. We curently are
experiencing 2 issues: 1. If you copy and paste from MS Word
2003/2007 it will not display the text correclty in the report; 2.
If you use the FCKeditor toolbar to insert bullets or a numeric
list it will not align the text correctly on the report. We are
using Coldfusion 8 with Hotfix 1 and Coldfusion Report Builder's
lastest build release.
Has one experiences this same issue with HTML fields not
printing correctly using the Report Builder? What other HTML
editors besides FCKeditor might we use?
Thanks,
Dan VanWieren

Can you tell me how to use </td> for each values
Give me your example report - using before or after report
Thanks
MT
<BLOCKQUOTE>quote:<HR>Originally posted by fdenis:
Hi Gavin,
If I understand well, your HTML tags are coded directly in your fields in the database, right? Because if it was not the case, you could have use a format trigger checking for which destination you're generating your report...
if UPPER(:DESFORMAT) = 'HTML' or
UPPER(:DESFORMAT) = 'HTMLCSS'
then
-- insert your HTML code in the value
-- of your field. something like...
newValue := '' | | :YOUR_FIELD | | '
srw.set_field_char( 0, newValue );
else
-- when generating to other format,
-- you'd have to add the formatting as
-- you want.
end if
return( true );
Of course, if it's not acceptable to remove the HTML tag from your database fields, you could develop a procedure that would translate your HTML tags to the good formatting (eurk... ;-)
Good luck... :-)
Frederic
<HR></BLOCKQUOTE>
null

Display issue with LiveCycle Designer ES4 for cropped PDF in WIN7

Hi,
I am having issue displaying the cropped PDF file in the LiveCycle Designer ES4. The PDF files are cropped 3 inches from bottom using Adobe Acrobat 8 Professional. It used to display properly when we have a WinXP machine but once we moved to a Win7 machine, it cannot display the top part of the PDF anymore. Can anyone help on how to fix the display issue? Thanks.
Kenny
Environment:
Adobe LiveCycle Designer ES4 V11.0.0.2013.0303.1.892433
Adobe Acrobat 8.0.0
Screenshots
Win 7, LiveCycle Designer does not display properly
Win XP, LiveCycle Designer used to display properly

Thanks vNohria.
I am having same issue with Adobe Acrobat 9. The Acrobat 9 cropped file is displaying properly under WinXP but have the same issue as above in Win7. This issue seems uncommon as I tried to look for similar issue and couldn't find any.
P.S. It's only the Design View in Win7 that has the issue, I can still see the file fine with Preview PDF in both enviornment.
Design View:
Preview PDF:

Display Issues with Mac Pro 1.1 HELP!!

I have a Mac Pro 1,1:
Model Name: Mac Pro
Model Identifier: MacPro1,1
Processor Name: Dual-Core Intel Xeon
Processor Speed: 2.66 GHz
Number Of Processors: 2
Total Number Of Cores: 4
L2 Cache (per processor): 4 MB
Memory: 4 GB
Bus Speed: 1.33 GHz
Boot ROM Version: MP11.005D.B00
SMC Version: 1.7f10
Running OSX 10.6.3
I'm on my second graphics card [ATI Radeon HD 2600] after having issues with the original [NVIDIA GeForce 7300 GT]. The issue with the NVIDIA card was that, at times, it would display digital artifacts, glitches, distortion and freeze up the system forcing me to have to do a hard shut down. I found many reports of similar issues with that card and the Mac Pro 1,1's.
When I replaced it with the ATI the problem went away for 6 months and now IT"S BACK.
So, are there any particular graphics cards that work OK with the Mac Pro 1,1? I don't want to waste my money again only to encounter the same issue!
I'm also contemplating getting a new Mac all together.
Please advise, I've read many threads with this issue and they all seem to point to the same deal: replace the card. I can't afford to keep replacing graphics cards.
Saki

The 2600XT required 10.5.2+ and while it may 'look' like a G5 the Mac Pro is not. G5 refers to IBM PowerPC based, not Intel Xeon EFI based.
You're running 10.6.3, might want to update your profile itself.

Text display issues with htmlText, Embedded Font

Hey All,
I'm having an issue with the display of my hyperlinks in a
textfield that is using embedded fonts. It offsets the hyperlinks
to the left along the line they are on and the underline doesn't
stretch all the way under the text field. The text display normally
when I don't embed the font. For some reason I think this might
have to do with the embedded character range so I opened it up.
Does anyone know if this range is enough or if there are special
characters flash uses that need to be embedded for their width even
though they arn't displayed.
Embedded range:
[Embed(source='MyriadPro-Regular.otf', fontName='Myriad Pro',
unicodeRange='U+0000-U+00fe')]
Here's a link to the related code:
http://pcpnew.privatepaste.com/a7eKaAuCTt

Any ideas?

Screen display issue with InDesign CS4 (Windows)

I just upgraded from CS2 to CS4. I can open and use InDesign with no problems, until I try to switch to another application. Then, when I try to go back to InDesign, all I can see is the portion of the bar at the top of the screen that shows the link to Bridge, the view options and a bit of the outline of a palette or two. I have a two monitor setup. Most of the palettes are on the auxillary monitor and they show up just fine. The main display is where I'm having the issue. I can toggle in and out of Photoshop with no display issues. I haven't tried working with anything else from the CS4 package besides InD and Photoshop. This was not an issue with any CS2 product (Dreamweaver, Fireworks, InDesign, Photoshop, Flash). Nor has it been an issue with any of the other software I am running (so far).
When the display vanishes, I can see the "data" from the program I was trying to toggle out of. For example, if I try to toggle between this page and InD right now, I can see most of this page except for the part of the page obscured by the outline of the control palette (that one reminiscent of pagemaker) and the little bits at the top. I can't see the project I'm working on. I can't see the File/Edit/etc. bar at the top of the page. A Control/Shift/Save will lock up the program completely. Then, I see the "save as" menu box (in addition to the browser screen around it) but the program is locked up. I can close everything on the computer and reboot and open InDesign to resume work--that is until I need to do something like edit a photo to drop into a layout. Then the issue occurs all over again.
Windows machine; XP Pro, service pack 3 build 2600; NVidea GeForce 9600 GT graphics card.

Bob, thanks for the info about the 6.0.2 patch. I'll try grabbing that today. This morning, on the first boot, I can't even see the program when I open it--just the snip of the command palette and part of the very top bar. Very irritating.
Peter, I have tried maximizing, closing, reopening, etc. everything else I can think of. Same issue. I finally just bit the bullet and went back to CS2, rebuilding the current project so I can get the work done by deadline. I'll look for new video drivers this afternoon after I get back on track timewise on this newsletter. Weird that this display issue should just affect the one Adobe program though, and not the others if it is a video driver problem. I didn't do a lot of work in Dreamweaver--just enough to see if it displayed the same weird behaviour. Nope. Nor does Photoshop. Nor does Bridge. Nor does Acrobat. nor does any other software on the machine.

Screen/Display Issues with Aperture 3.6 & iPhoto 9.6 on Yosemite

When I open Aperture or iPhoto, my screen goes all wonky. I have an early 2011 MacBook Pro with 8 GB Ram with the Intel HD Graphics 3000 512 MB. What is it doing this? How can I fix it?

Hello there, tehat17.
The following Knowledge Base article offers up some great recommendations for troubleshooting issues with the display on your MacBook Pro:
Apple computers: Troubleshooting issues with video on internal or external displays
Start with these:
Reset the system
You can reset the Mac's parameter RAM and SMC.
Reset the resolution
Start by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
Start up in Safe Mode.
From the Apple () menu, choose System Preferences.
Choose Displays from the View menu to open the preferences pane.
Select any resolution and refresh rate that your display supports.
Restart your computer.
If you tried all of these steps for your display and the video issues persist, contact Apple technical supportor take your Apple computer to the nearest Apple Store or Apple Authorized Service Provider (AASP) for diagnosis. If you plan to visit an Apple Retail Store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).
Note: Diagnostic fees may apply for issues not covered under warranty or the AppleCare Protection Plan (APP).
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Apple 27'' Cinema display issue with nvidia quadro 1800 - Win 7 64bit

Hello,
I'm trying to help out a buddy of mine with his cinema monitor.
He has a Windows 7 x64 machine, with a Nvidia Quadro 1800 - monitor hooked in via DVI port.
Basically when you boot the PC up with the Apple monitor, the monitor turns on and backlit but no display, no options for BIOS or anything like that, just lit up and black screen.
I can boot up the PC with a Dell monitor and it boots up fine - and if I take the DVI out of the Dell monitor and plug it in to the Apple monitor while the machine is up and running, the Apple monitor comes on and works without issue - however, if you were to reboot it, or if it goes to sleep - I lose the Apple monitor, and have to start the process over.
The Windows machine recognizes the Apple monitor, it displays as Cinema monitor - all the video card drivers are up to date - also had the same issue with a previous video card (I swapped the video cards out thinking initally it was a bad video card)
What am I missing?
Thanks!

Hello,
I'm trying to help out a buddy of mine with his cinema monitor.
He has a Windows 7 x64 machine, with a Nvidia Quadro 1800 - monitor hooked in via DVI port.
Basically when you boot the PC up with the Apple monitor, the monitor turns on and backlit but no display, no options for BIOS or anything like that, just lit up and black screen.
I can boot up the PC with a Dell monitor and it boots up fine - and if I take the DVI out of the Dell monitor and plug it in to the Apple monitor while the machine is up and running, the Apple monitor comes on and works without issue - however, if you were to reboot it, or if it goes to sleep - I lose the Apple monitor, and have to start the process over.
The Windows machine recognizes the Apple monitor, it displays as Cinema monitor - all the video card drivers are up to date - also had the same issue with a previous video card (I swapped the video cards out thinking initally it was a bad video card)
What am I missing?
Thanks!

Snow Leopard 10.6.3 display issues with Autodesk Combustion 2008

Hi!!
Recently i do a update to 10.6.3 and my combustion got some glitches and display issues trying to browse thumbnail folders... even frozing combustion (I know, the software its old, and I know about the incompatibility since 10.6, footage issue, and others, but my boss doesnt care about it)
(Autodesk Maya '10 too, but theres a post for that)
So, in 10.6.2 I can browse previews of folders, but with 10.6.3 combustion comes unstable (yea.. more, hahaha). Apple has posted a new 10.6.3 v1.1 revision today 14th april...
http://support.apple.com/kb/DL1017
and they said: *"address compatibility issues with OpenGL-based applications"*
Anyone has yet combustion and tested with the new 10.6.3 revision 1.1??? I cant loose a day of job updating, and if its the case, downgrading and resintalling all again... with my boss eyes over me..
Thanks!

Nutshell is to download and install the 64-bit version of MySQL, then try again. If you're still stuck try force re-installing the DBD modules, e.g. cpan -fi DBD::mysql (The perl installed in 10.6.x is 64-bit and doesn't like playing with the 32-bit database.)

Macbook Pro w/ Retina Display Issues with Wifi with Bluetooth.

I have a Macbook Pro with Retina Display, 2.3 Ghz model. I've noticed that while on wifi, when I use a bluetooth mouse or even turn on bluetooth on my computer, the wifi performance severely decreases for a short period of time. While using a bluetooth mouse the wifi intermittently fails and I need to shut off wifi and turn it back on to correct the issue.
Using the ping utility on terminal I have confirmed this in that when bluetooth is turned on, a large number of packets are lost for about ten seconds.
Has anyone else been experiencing this problem and is this an issue I can correct myself or should I contact Apple?
Thanks

I have the same issue with my macbook pro with retina display. I have 2 macbook pros. I never would of thought that a bluetooth signal was interfering with both of them. I had a gateway wireless router that only had 2.4 Ghz 802.11 b/g, which is the same frequency of bluetooth. I know that bluetooth bounces from channel to channel, whereas wifi sticks to one constant channel (normally). I have reinstalled my mac twice, thinking that somehow my drivers were corrupted. This was false becuase everytime I reinstalled it did the same thing, Act fine for 5-10 minutes and randomly the internet connection would freeze up all together for 10-20 seconds. I have also tried contacting apple multiple times and they tried to do a smc and pram reset. They also tried to get rid of my chaches in my computer. It all seemed to be fine, and then when I got off the phone it would act us once more.
     I have read numerous articles to try and fix the situation; one of them was to try change the location of the network and change the MTU size. No help. I called At&T (my internet provider) and got a new router and that did work for a while. But eventually acted up again. The router was still 2.4 GHz 802.11 b/g. I read this article and found out that my Magic Mouse might be causing the issue. Turns out to be true. Everytime I would browser the internet or browse the itunes store and it would freeze, i would immediatly turn the bluetooth off and what do you know, it works!!! This is a huge dissapointment in apple however. It seems to be only a macbook pro w/ retina display issue. My other macbook pro only acts up when i'm using my newer one (something is wrong with the bluetooth and wifi in the retina for the 2.4 ghz frequencies.
     I just got a Airport express, and have not experienced this issue what so ever. This is due to the fact that it is a dual band wireless router. It supports 2.4Ghz and 5 Ghz both at 802.11 a/b/g/n which is a major improvement compared to what I had. I use the 5Ghz frequency and have no issues still.
     This is still an issue however because if I want to go out and use anothers persons wifi, I can't control their frequency. So I will still have this issue.

Display issue with SAPMMC

Similar Messages

Maybe you are looking for