Display issues after downloading Windows 10

After downloading Windows 10, I now have a continuous flashing small black screen like a black command prompt type of screen and I cant get it to stop. I wonder if anyone has this probl`em as well. Would appreciate help with this, thanks.

I also have the same issue, only escalated. I am the IT personell for a small business and have over 35 HP Pavillions running on my network. I have told my employees not to download Windows 10 because some of our Enterprise software has not been tested on it. You can guess what happened. Two machines ran the update and after one of the many restarts, began cycling through the same error. On both machines, after what seems like indefinite restarts, I powered down to try other solutions. After powering down, both machines will not even access the BIOS. If they are you can not tell because I have no video. One thing for sure, they do not complete the POST test because I get no beep codes. I have removed the drives and connected them to different pc's and can read them just fine but both drives are completely empty except the recovery partition. I am also convinced that the update somehow dumped the BIOS chip on these boards rendering my pc's useless. I can not, on any forums get someone to verify my findings but there are rumours.

Similar Messages

I am trying to install itunes after downloading Windows 8.1. I get an Windows Error 2 message-- "Apple Application Support is required to run itunes helper." Any suggestions?

I am trying to install itunes (64 bit) after downloading Windows 8.1 on my HP Laptop. I keep getting an error message Windows Error 2--"Apple App;ication Support is required to run itunes helper" Does anyone have any simple suggestions for a user with limited knowledge of Computers?

With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version):
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, see if iTunes will launch without the error now.
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

HT1296 syncing ipad after downloading windows 8

Help - After downloading Windows 8 and not migrating my settings i cannot sync my ipad music with my computer it only syncs purchased music

What does either of these things have to do with iTunes?
Windows 8 has not been officially released and iTunes is not supported on it.
Take up your issues with Microsoft.

Scan doesn't work after downloading Windows 10

After downloading Windows 10, scanning will not work on my HP Officejet Pro 8620 all in one printer. I used HP Print and Scan Doctor program and it stated that it fixed my scanning problem. However, when I attempt to scan I get a message that says it cannot find the application to support the selection. BTW...I have also unistalled and reinstalled the driver for this printer thinking it might been to "reconnect" in some way with Windows 10. On another note, by DVD drive now doesn't work either after downloading Windows 10. HELP !!

Hey there,
Try the following step's, i believe it will help you overcome the issue.
1.Start by dissconnecting the USB cable.
2.Remove the Printer Driver from the "Devices and printer's" which can be found in the control panel.
3.Download this file (http://ftp.hp.com/pub/softlib/software12/COL48430/al-117537-4/DJ1510_188.exe) which is the full solution for the HP Dj 1510 series.
4.Extract the contents from within the file.
5.Open up the "Utils" Folder and within choose the "x64" folder, Inside you should be able to spot a File called "RemovePreInstalledDrivers" >> After you will open that file a Black screen will open, Wait for it to close then move to the next step.
6. Go back to main folder where you have already extracted the software and Right click on the x64.msi file (Name will most likely consist your printer model) and choose the "Repair" Option. >>Afterwards you will be prompted to preformed a restart. (Incase you will get a Messege saying "This action is only valid for products that are currently installed" Just double click the file instead)
7.After the restart, Head into Local Disk C/ProgramFiles/HP/PrinterModelFolder/bin/USBSetupLuncher and double click it.
8.Follow the steps shown to you and connect the USB cable when you are asked to.
That should add the scanner to Your imaging devices.
Best Of luck~

No sound after download window 8.1 pro

After downloaded window 8.1 pro 64-bit on my hp G60-637CL notebook, I did not get SOUND again. I will apreciate any help please.

i have no audio since after downloading windows 8.1

Hi, we are using mac mini's for our developement purpose. connecting the same through using Real VNC. Mac mini's are late 2009 and 2010. Now we have upgraded them to 10.8.5. after upgrading having display issues after launching the simulators

hi, we are using mac mini's for our developement purpose. connecting the same through using Real VNC. Mac mini's are late 2009 and 2010. Now we have upgraded them to 10.8.5. after upgrading having display issues after launching the simulators, we are unable to view the icons we need to move the simulator (into different places) to view the icons.
Also we are having Mac book pro's (Late 2009 & 2010) after upgrading them to 10.8.5. Unable to launch the mac, getting only white screen with apple icon.
Let me know is there any specific Hardware (Graphic Cards) we need to use for the same.
Please provide me the early solutions.
Regards,
Suresh.

Hi, try this first...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.

Display Issue after 10.9.2 update

After updating my Macbook Pro with Retina to 10.9.2 -- My display flickers for a second after sleep and or blank screen and then goes back to normal. Has anyone else been having display issues after updating?

Yes similar problem here: I have a MacBook Pro, 15 inch Retina, Mid 2012, and when I connect a secondary display via HDMI (and also HDMI-to-Thunderbolt) then the external monitor becomes the main display.
I have not figured out on how to switch back to former settings. My guess: it's a bug. A quick search confirms that many others have secondary display issues since 10.9.2
(Steve would have fired those lazy punks, who failed to do sincere testing before release …)

My sound is not working after downloading windows 10

My sound is not working after downloading windows 10 please can you help me?

right click start then select device manager see if there are any yellow ! in triagle symbols next to any device if there is you may need to reinstall the audio driver

Weird OSX display issues after going to webpage, only thing that fixes is Perm repair

I have a bizarre issue that i'd love some input on. Late 2009 iMac, Mountain Lion (then Mavericks).
I use Firefox to utilize a real estate website (Fusion MLS) for several months now. A couple of days ago, after i would log into the website and use it for a little bit, the rest of my tabs, apps, windows, would all start appearing as black boxes, or have glitched out (generally black) screen display issues. To be clear, other tabs inside the browser would be black, or partially black, and also the right half of my taskbar icons would be black silhouettes of the icon. BUT, the Fusion MLS website would still work fine. Closing the page, etc, would not fix the problem, it would be stuck like that no matter what i closed or opened, computer would function fine except for the display, but i couldnt see hardly any of the apps so I'd have to shutdown, but a simple reboot didnt fix it. After an hour of troubleshooting, I started off in Mountain Lion when the problem appeared, and in the process of troubleshooting I decided to upgrade to Mavericks to see if that would fix the problem, it didnt. Ultimately I discovered the only thing that fixes the problem is to boot into Safe Mode and Repair Permissions, then i can come back in as normal and everything is normal again (a standard reboot doesnt fix it, when logging back into OSX it would still have black silhouettes and all the app windows would be black).
So after the above I decided to just start using a different browser to go to this Fusion MLS website (Safari). Which worked fine for a day, but now when i go to the website, i have no problems, but when i put the computer to sleep, and bring it back, the windows are blacked out and icons silhouetted. So back to safe mode, repair perms, and then it works again. When i do the repair perms, there are usually no verbose things that it says it repairs, sometimes it says something about the PrinterList being 0 instead of 80, but thats it.
Any help or insight would be greatly appreciated, I'm completely dumbfounded....

Now regular Repair Perms doesnt fix it, it has to be Diskwarriors Repair Perms. Also it happens anytime the computer is put to sleep for a length of time and brought back, regardless of whether the Fusion MLS website was gone to.

HP Envy dvd drive issues after the Windows 8.1 update

I have a HP Envy and after the Windows 8.1 update the dvd drive is not working. I can see the drve but it is difficult to get the drive to open or recognise there is a disc in it. What can I do?

Hello @Jenino,
I understand that you are having issues with the Optical Drive on your HP ENVY 7 PC. I would be happy to assist you, but first I would encourage you to post your product number for your computer. I am linking an HP Support document below that will show you how to find your product number. As with this I can provide you with accurate information.
How Do I Find My Model Number or Product Number?
Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

MANY issues after installing Windows XP Home Edition with Boot Camp

I have been having a lot of problems after installing Windows XP Home Edition (2002).
For one, after installing Windows using Boot Camp with Mac OS X 10.5.1, I opened Windows on my Mac Book, inserted the Mac OS X Disk 1 as in the instructions and got the message: "This package requires a newer version of the Windows installer. Do you want to update the version of the Windows Installer on your system?" When I clicked Yes (I had NO idea what it meant at the time), I got the message: "The required resource 'UPDATE' is missing" and the Installer quit.
How do I fix this problem?
Another problem I have is that there is no sound on the Windows XP, yet it works perfectly on Mac OS X. Is there any way to fix this problem?
A third problem I have is that I can't wirelessly connect to the internet using Window XP, yet I can on Mac OS X. I have no idea on how to fix this, and it's really messing with me. D:<
D: Some of these problems may not be specifically "Application" related, but the top one mainly is. (in my views)
~Twilight

Twilight:
Is it possible that you installed Windows XPSP1 instead of the required SP2? If yes then that is cause of all of your issues listed in your post. You have no sound and you cannot connect wirelessly because you still have been unable to install the boot camp drivers when you inserted the leopard disk.
Please double check to see which version of windows XP did you install. Remember, you need windows XPSP2 for all this to work.
Now, in the event that you installed XPSP1 then you will need to get to the microsoft windows site on a different computer and burn the Service Pack 2 for windows XP on a CD. After that boot your apple mac to XP side and insert the Service Pack 2 disk and install the pack. After that, it will ask you to restart the computer which you must and then once fully booted into XP then insert the leopard CD again and see if takes and installs all the necessary drivers.
Axel F.

Video Playback Issues after Downloading iTunes 10.4.1 & Quicktime

After downloading v. 10.4.1, video playback framerate is terrible. Voices are choppy & out of sync with dialogue. The music wasn't necessarily affected but, can here slight distortion. This hasn't been an issue until downloading the latest software version. Then iTunes crashes. Am I the only one this is happening to?

You may consider updating your iTunes to the latest version to fix bugs.
Download iTunes

Display issue with vertical windows start menu and dual screen

Hello everyone
I never reported it and I didn't find any information on google or mozilla support about this so here it is :
I am on windows 7 and I set up my windows start menu vertically. I also have 2 screens. These both points are important. If I put the start menu horizontally I do not have the issue anymore, and If I turn off one screen to have the display only on one screen, I do not have the issue anymore, which is a rare setup I guess so it could explain why this bug has never been detected.
HERE IS THE ISSUE
I have display issues on website with a big width, even the default add-ons Manager firefox page doesn't display correctly. Here is a screen shot:
http://img15.hostingpics.net/pics/368172bugFirefoxDisplay.png
So as you can see the disable and remove button on the right are not displayed, and at the bottom there isn't any scroll bar to scroll ! So I have no way to display the information on the right of the page, and it happens on a lot of other website (gmail, etc)
It is not such a big issue because my start menu is on my left screen and I can move firefox on the right screen to have a correct display.
I still think this is worth reporting this bug. I hope it is clear, feel free to ask questions if you didn't understand.

You can try to disable hardware acceleration in Firefox (you need to close and restart Firefox).
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration

Major computer issues after downloading Adobe CC

Hi There,
I have an Alienware 14 and I started having major issues following the downloading of Adobe CC. After downloading I started getting blue screens, restarts and application errors unrelated to Adobe. I have no idea what the problem is but since downloading I cannot update my Norton security or my Nvidia updates. PLEASE HELP ME!!
My Computer:
Alienware 14
Intel i7 4900mq
16gb ram
256gb ssd
750gb 7500rpm drive
Nvidia 765m w/ 2gb ram

Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

TS5183 Bluetooth hands free issues after downloading ios7

After downloading ios7 on my iPhone 4s, I the audio features on my iPhone are muted when connected to the Bluetooth handsfree link in my 2012 Acura 2012. Text notifications, map navigation prompts and music are all muted. Phone calls can be recieved via the Bluetooth. These features worked previously. Is anyone else experiencing this issue?

After downloading ios7 on my iPhone 4s, I the audio features on my iPhone are muted when connected to the Bluetooth handsfree link in my 2012 Acura 2012. Text notifications, map navigation prompts and music are all muted. Phone calls can be recieved via the Bluetooth. These features worked previously. Is anyone else experiencing this issue?

Display issues after downloading Windows 10

Similar Messages

Maybe you are looking for