Display issues (application placement and background) when waking from lcd sleep

I hve three DVI displays connected to my Mac Pro running Lion.  I regularly put my displays to sleep using a hot corner to lock my workstation.  This was not a problem in Leopard or Snow Leopard; however, in Lion I have noticed several issues upon waking the workstation from sleep.
-One of the LCDs will have a grey backgroud instead of the wall paper set for it.
The lcd with the grey background seems to be determined by which lcd I place the dock in.
The background will come back if I logout, reset, or move the dock to a different screen
-The applications will not be located on the screens they where on when I put the displays to sleep
Sometimes they are all on one display or distributed across two displays (this is most common)
Rarely the applications will not be on the correct displays and they will have been resized.
I'm liking OSX Lion so far, but having to repeatedly fix these problems is becoming a serious pain.  I have updated to the latest patch for OSX 10.7, but that did not change anything reguards to these problems.  Does anyone know how to solve these problems?

Matteo : I guess it is a good sign that only 2 of us have reported this minor glitch here . . . I may experiment with switching to a different desktop pattern and / or screen saver to see if it persists . . . also, since installing SL I have only done Sleep and of course restarts after getting the 10.6.1 update and a few others so I need to do an actual Shut Down and later start up fresh and see what happens.

Similar Messages

  • Monitor Blanks in and Out When Waking From Sleep

    Since getting my Mac Pro (with Apple installed RAM and NVIDIA GeForce 8800 GT), I've noticed that the screen does not immediately turn on when waking from sleep, as my older Macs did. Rather, it turns on for a split second, goes blank for two seconds, turns on again for a split second, goes off again for a second or more, and then comes on permanently.
    This behavior only occurs when waking from sleep; it does not occur when the monitor turns on from the active screen saver.
    Is this normal for the MAC Pro with an NVIDIA GeForce 8800 GT? I have a HP w2408h monitor with a DVI to HDMI cable. Everything else works fine, including all video behavior.
    Thank you.

    Hm. Bluetooth, interesting. Thanks for the idea.
    I just opened the lid to see about the BT setting and the display didn't go off-on. The BT is off, I'm pretty sure I did that when setting it up as I don't use BT for anything.
    I wasn't suspecting anything was seriously wrong, it's just that quick-on feature was highlighted as a selling point and I was curious about the glitch, if it was a setting I could change, for instance like you've highlighted. Annoying when things don't work as advertised.
    And if I show the machine off to colleagues and friends, that will be a bad first impression they will want explained.

  • Problems when waking from long sleep periods

    Suddenly this morning my iMac developed a problem when recovering from a long period of sleep. I'm having trouble finding a solution.
    I have my iMac set to ask for password when it recovers from sleep or screen saver. When I woke my iMac this morning the password dialog box appeared at the top of the screen as a garbled mess. If I put my iMac back to sleep and then wake it again it usually solves the problem.
    I don't want to turn password verification off. Has anyone seen this problem before? Any suggestions on what might be cause?

    funkyblue:
    I usually leave my Pismo on and allow it to sleep. I find that waking from sleep and general functioning of the computer works a lot better if from time to time (I do it at least weekly) I shut down the computer, start up in Safe Mode, log in, empty Trash and reboot normally. The emptying Trash part clears the font caches.
    You should consider doing other maintenance procedures, if you don't already. Gulliver's Mac OS X System Maintenance has good ideas with linked resources.
    Please do not hesitate to post back with further questions or comments.
    Good luck.
    cornelius

  • External display has no menu bar/dock when waking from sleep in clamshell mode

    After Mountian Lion upgrade, external display shows no dock or menu bar when MBP wakes from sleep in clamshell mode.  I have to open and close the lid of the laptop to sort it out.  Any ideas?

    MacBook is connected to AC adapter. My MacBook is almost new, I have it for only few months, connector looks clean.
    I never had problems with AC adapter but I will try different wall outlet.
    It's a shame that I have no other device with display port output so I can not test if the problem is with my display. With dual DVI connected to my desktop computer display works fine... for more than one year now...

  • Why am I losing text and background when exporting from InDesign?

    Hi, I am VERY new to graphic design & working with InDesign for the first time.  When I export... to pdf, the 2nd page of my 3 page indesign document loses several (but not all) text boxes and the background.  Anyone know why this is?? PLEASE HELP!! this is time-sensitive!! Thanks so much in advance!!

    Layer set to not print? Some description of the file and contents as well as the OS and version and the version of ID would be of help.

  • GT70 internet very slow and sluggish when waking from sleep

    My GT70 sometimes is very slow and sluggish to respond when it is awoken from sleep mode. Browsers become unresponsive (hyperlinks don't register as links and require multiple clicks to respond) and internet gets very slow. Speedtest.net reports  .50-3mb/s when it is usually 24mb/s and above.  The hdd also thrashes about and won't calm down for what seems like an eternity.
    This only happens when opening the lid after the machine sits idle for several hours. This is fixed by restarting the machine.
    Does anyone know why this laptop would be behaving like this? it is very frustrating and makes sleep mode pretty much useless.
    cheers,
    -deluxxe

    Quote from: darkhawk on 22-November-13, 13:17:05
    First thing I would do is get CPU-Z and open that after wake-up and seeing if the CPU is running at the speed expected, or if it's stuck at some lower speed.
    thanks for the reply. will try that next time it happens.

  • MacBook Pro freezes when waking from deep sleep

    When I plug in my Mac to charge overnight and go to unplug it in the morning, it will make the sound it does with the CD drive and then it acts like it's coming on. the first time I use it  after I've unplugged it, the screen will come on like normal and show the login screen, when it does I can't move the mouse or type my password in for a minute or two. after about 20 seconds, the screen turns off...however I can turn it back on by clicking the power button but most of the time it still won't let me enter my password or move the mouse around. I'm not sure what the problem is. but it's only been doing this since I've updated to Yosemite.

    Try turning off "Allow Bluetooth devices to wake this computer" under the advanced section of the Bluetooth System Preferences.  Hope this helps.

  • Desktop Wallpaper Screensaver Bug? [When waking from sleep]

    I'm not sure if this topic is in the correct category but it seems to fit.
    I have a new 15.4" MacBook Pro with OS 10.6.3. I have multiple images that I want as a wallpaper and so I decided to select "Change picture" in the preferences pane. I also selected "Random order" and chose "When waking from sleep" as the time for the wallpaper to change.
    However, if I close my lid, and then re-open it, when the computer wakes up, instead of the wallpaper changing, it changes twice.
    Now, this isn't really a problem but it can get annoying sometimes and I was wondering if this problem is due to something I do, rather than the operating system.
    Thanks.

    I just noticed something, perhaps this will help? There appear to be two kinds of sleep, display sleep and computer sleep. I noticed that if my machine is running (playing music, for instance) and the display goes to sleep, when I use the mouse to wake up the screen the background changes. So maybe when I wake up the machine from computer sleep it changes once for waking from computer sleep, and once more for waking from display sleep?

  • Has anyone else noticed that: "The OS X Lion v10.7.3 Update includes Safari 5.1.3 and fixes that: Resolve a Wi-Fi connection issue when waking from sleep" didn't work?

    I installed OS X Lion v10.7.3 because of the following claim.
    The OS X Lion v10.7.3 Update includes Safari 5.1.3 and fixes that:
    Resolve a Wi-Fi connection issue when waking from sleep
    It continues to be a real pain having to reconnect to the network each time I wake my MacBook Air from sleep.
    Does anyone have a suggestion for the resolution to this problem?

    It seems the update fixed old problems for some and caused new problems for others. Sorry to hear you're in the latter group.
    Here are some things to try.
    1. Go to System Preferences > Network, and click the gear icon under the network interfaces like so:
    Whatever service order you have set, drag Wi-Fi either to the top (assuming it's not already there) or someplace else in the list. Click OK and then Apply. Sleep the system then wake it again to observe any changes.
    2. Click Wi-Fi in the above then click Advanced. Select all the networks your computer has ever joined and delete them with the "-" button. OK then Apply again. Select your network under the AirPort icon to re-join it. Sleep and wake again to see if that did anything.
    3. Try creating a new, temporary user account. Log in under that account to see if its behavior is any different.
    You may have done all of these already but perhaps there is something you have not thought of. If nothing helps we may just have to wait a bit longer for Apple to release a fix.

  • Detect display when waking from sleep?

    Is there any way to force the display detection when waking from sleep? I find that if the mini wakes before the monitor is on, i get a blank screen. When the monitor is on before waking, everything is normal.
    I have the DVI-Detective, and the problem is actually worse when using it -- nothing is detected when waking up, no matter if the display is on or not.
    My specs:
    OS 10.5
    C2D, 2Ghz - 2GB RAM
    Sharp Aquos 52inch
    All standard HD resolutions work fine - it's just now a matter if figuring out how to force the mini to detect the display...
    Surely there must be a way to do this?

    Great that you got it working. It seems what is happening when the TV is switched off is that the Mac can no longer see the EDID data. Basically, it's the same as if a hot-unplug event had occurred from OS X's perspective. The mini thinks the TV's video cable has been unplugged, so it thinks it is running headless, which of course it is not. And for some reason not completely clear to me, when the TV's power is restored, a hot-replug event is not triggered and the mini still thinks it's running headless. Maybe you are right that it is removed from the list of connected devices for good. But it isn't supposed to work like that.
    The DVI Detective is the right tool for the job in cases like this, so it's good you have one and it's good you got it working. I agree it would be nice if there was more override control within OS X for times like this when things go wrong. But if more TV and 2nd/3rd tier monitor makers paid more attention to computer plug-and-play, then these things would work right in the first place. Your TV is in violation of the plug-and-play standard because the standard calls for the host (Mac mini in this case) to be able to power the ROM and I2C bus within the TV even if the TV is in a powered down state. Clearly your TV isn't doing this.

  • Missing sound + missing USB power (sometimes) from Thunderbolt Display when waking from sleep

    Hi
    Two problems - one of which is driving med crazy!!
    Have the latest updates, and the display is connected to a MBA (mid 2011).
    The two are almost alwayes connected, and every time I wake the MBA from sleep, the Thunderbold Display does not "support usb sound" - the sound options are only MBA and headphones. Only a restart will give me the option to use Thunderbolt as sound output: WHAT TO DO!?!?!!
    Sometimes when waking from sleep the USB in the Display seems to be "off" - the will not charge my devices (iPhone, iPad etc.). Only reboot seems to fix this... I have seen this in other discussions but not found a permanent solution - any thoughts?

    Same here but reinstalling OSX is a bit drastic. I solved the problem by deleting a preference.
    Go to Macintosh HD then System then Library then Preference panes then Sound.prefPane
    Delete Sound.prefPane (you need to type your password).
    Logout or restart.
    This has happend twice this week so WHY is this suddenly occurring?
    Hi,
    I found this solution in the forum, but I can't find it again. I had cut and pasted it into a text file, because it solved my problem. I just don't want to take any credit for it. It did work for me. I had no problems for 3-4 weeks with the monitor, I have had the sound problem since last Friday. Very frustrating.
    BSGINC

  • Resolve a Wi-Fi connection issue when waking from sleep

    Hi,
    In the recent release for Mac OS X Lion 10.7.3 "Resolving a Wi-Fi connection issue when waking from sleep" was supposed to be resolved, not so at my end. Has anyone else encountered the same issue and if so will there be a resolve.
    Thank you

    Hello BGreg and thank you for your answer,
    I have alreadty read about this solution, and tried it.
    I downloaded the 1.2 Go file, and applied it. And repaired permissions.
    Everything went fine.
    Unfortunately, it didn't solve the problem.
    Meaning that when iMac wakes up, it doen't join my WiFi network.
    I have to do it manually.
    I don't know what to do : it is very strange because I never had that problem with OS 10.7.2 !
    And my network setup has never changed.
    another info :
    I noticed that in the network setup screen, when I want to close the little lock to restrain further modifications, it won't close. Weird !
    Do you think I should call Apple Assistance ?

  • Can i display My application iview and transaction iview in single page ?

    Hi,
    I am new in web dynpro and portal. i am doing one approval application through web dynpro. Now i need to attache sap inbox to application. For that some budy suggested me about transaction view. So my questions are as folloes.
    1.> How i attached my application to iview ?
    2.> How i created Transaction  iview ?
    3.> Can i attache my application iview with transaction iview if it is possible then how ?
    4.> Can i display My application iview and transaction iview in single page ?
    Please guide me in this procesure.
    Regards,
    Gurprit Bhatia

    Hi Gurprit,
    1.> How i attached my application to iview ?
           You can attach your application to web Dynpro IView, for this login into portal, in the Content Management tab right click on a folder, then New --> IView. Select WD java Application. Select your application and create an Iview.
    2.> How i created Transaction iview ?
           Similarly, instead of selecting WD java Application, select iView template, you will get a list of available templates, and in this you will find template for Transaction Iview, in this template define the Tx for which you want to create the template.
    3.> Can i attache my application iview with transaction iview if it is possible then how ?
          No, I dont think you can attach your application to transaction Iview. but, you can attach both IViews on single page.
    4.> Can i display My application iview and transaction iview in single page ?
          Yes, you can attach  both IViews on single page. Again in Content Management tab, crate a PAGE; Then right click on created IViews and select  add IView to Page ßß: Delta Link.
    Hope this helps.
    Regards,
    Amit

  • When waking from "sleep" screen turns grey under the pointer and the computer is effectively dead. Have to hold power 'off' for five seconds to regain computer.

    When waking from "sleep" the screen appears normal but, the pointer leaves a trail of grey as it moves and the whole screen will turn grey if I keep moving the pointer. The computer is effectively dead. Have to shut down by using power off for six seconds and then re-starting. I know little about computers!

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem(s)?
    After testing, reboot as usual (i.e., not in safe mode.)

  • Keychain is read-only when waking from sleep

    So, when waking from sleep my keychain becomes read-only and I'm forced to restart since many of the applications I tend to use (itunes, safari, skype. messages and disk utility) start giving me error messages or are unresponsive. I've tried repairing the keychain, deleting and creating a new keychain, reinstalling the OS (10.8), resetting the ACLs using the recovery partition, repairing permissions using the recovery partition. The only thing I haven't tried is wiping out the drive and installing the OS anew which I would like to avoid . I am on a 2010 13" macbook pro using 10.8.3. I don't think it started after an update. I did recently install a new hard drive since the previous hard drive died. I used time machine to restore my apps and user account. Advice anyone? Thanks

    Hello-
    Well I spoke to soon. The problem started a few weeks later. Since then I have installed the OS on to a new hard drive. I did import my user account from a time machine backup but did not import the Apps and System settings. I created a new account and moved my media and documents from my old account to the new account. I then deleted the old account. After all that I am still getting the read-only problem with Keychain. It now happens while I am using my laptop, not just when it wakes from sleep. As I mentioned before the issue is intermittent, about once or twice a week. The last occurrence happened a few minutes after I booted up. I have pasted the log below. I have taken it in to Apple and they ran a check-up and everything came back ok. I'm concerned because my apple care ends in about a week. Any advice you can give would be greatly appreciated. Thanks.
    7/10/13 6:52:39.000 AM bootlog[0]: BOOT_TIME 1373464359 0
    7/10/13 6:53:06.000 AM kernel[0]: Darwin Kernel Version 12.4.0: Wed May  1 17:57:12 PDT 2013; root:xnu-2050.24.15~1/RELEASE_X86_64
    7/10/13 6:53:06.000 AM kernel[0]: vm_page_bootstrap: 1944529 free pages and 70703 wired pages
    7/10/13 6:53:06.000 AM kernel[0]: kext submap [0xffffff7f80737000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff8000737000]
    7/10/13 6:53:06.000 AM kernel[0]: zone leak detection enabled
    7/10/13 6:53:06.000 AM kernel[0]: standard timeslicing quantum is 10000 us
    7/10/13 6:53:06.000 AM kernel[0]: standard background quantum is 2500 us
    7/10/13 6:53:06.000 AM kernel[0]: mig_table_max_displ = 74
    7/10/13 6:53:06.000 AM kernel[0]: corecrypto kext started!
    7/10/13 6:53:06.000 AM kernel[0]: Running kernel space in FIPS MODE
    7/10/13 6:53:06.000 AM kernel[0]: Plist hmac value is    735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
    7/10/13 6:53:06.000 AM kernel[0]: Computed hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
    7/10/13 6:53:06.000 AM kernel[0]: corecrypto.kext FIPS integrity POST test passed!
    7/10/13 6:53:06.000 AM kernel[0]: corecrypto.kext FIPS AES CBC POST test passed!
    7/10/13 6:53:06.000 AM kernel[0]: corecrypto.kext FIPS TDES CBC POST test passed!
    7/10/13 6:53:06.000 AM kernel[0]: corecrypto.kext FIPS SHA POST test passed!
    7/10/13 6:53:06.000 AM kernel[0]: corecrypto.kext FIPS HMAC POST test passed!
    7/10/13 6:53:06.000 AM kernel[0]: corecrypto.kext FIPS ECDSA POST test passed!
    7/10/13 6:53:06.000 AM kernel[0]: corecrypto.kext FIPS DRBG POST test passed!
    7/10/13 6:53:06.000 AM kernel[0]: corecrypto.kext FIPS POST passed!
    7/10/13 6:53:06.000 AM kernel[0]: AppleACPICPU: ProcessorId=0 LocalApicId=0 Enabled
    7/10/13 6:53:06.000 AM kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=1 Enabled
    7/10/13 6:53:06.000 AM kernel[0]: calling mpo_policy_init for TMSafetyNet
    7/10/13 6:53:06.000 AM kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
    7/10/13 6:53:06.000 AM kernel[0]: calling mpo_policy_init for Sandbox
    7/10/13 6:53:06.000 AM kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
    7/10/13 6:53:06.000 AM kernel[0]: calling mpo_policy_init for Quarantine
    7/10/13 6:53:06.000 AM kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
    7/10/13 6:53:06.000 AM kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
    7/10/13 6:53:06.000 AM kernel[0]: The Regents of the University of California. All rights reserved.
    7/10/13 6:53:06.000 AM kernel[0]: MAC Framework successfully initialized
    7/10/13 6:53:06.000 AM kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
    7/10/13 6:53:06.000 AM kernel[0]: IOAPIC: Version 0x11 Vectors 64:87
    7/10/13 6:53:06.000 AM kernel[0]: ACPI: System State [S0 S3 S4 S5]
    7/10/13 6:53:06.000 AM kernel[0]: PFM64 (36 cpu) 0xf80000000, 0x80000000
    7/10/13 6:53:06.000 AM kernel[0]: [ PCI configuration begin ]
    7/10/13 6:53:06.000 AM kernel[0]: console relocated to 0xf80010000
    7/10/13 6:53:06.000 AM kernel[0]: PCI configuration changed (bridge=1 device=1 cardbus=0)
    7/10/13 6:53:06.000 AM kernel[0]: [ PCI configuration end, bridges 5 devices 24 ]
    7/10/13 6:53:06.000 AM kernel[0]: AppleIntelCPUPowerManagement: (built 18:11:47 May  1 2013) initialization complete
    7/10/13 6:53:06.000 AM kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID 78ca39fffe131078; max speed s800.
    7/10/13 6:53:06.000 AM kernel[0]: USBMSC Identifier (non-unique): 000000009833 0x5ac 0x8403 0x9833
    7/10/13 6:53:06.000 AM kernel[0]: mbinit: done [64 MB total pool size, (42/21) split]
    7/10/13 6:53:06.000 AM kernel[0]: Pthread support ABORTS when sync kernel primitives misused
    7/10/13 6:53:06.000 AM kernel[0]: rooting via boot-uuid from /chosen: F24E7B60-8654-3521-9DC6-9CA2F1979476
    7/10/13 6:53:06.000 AM kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
    7/10/13 6:53:06.000 AM kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
    7/10/13 6:53:06.000 AM kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
    7/10/13 6:53:06.000 AM kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
    7/10/13 6:53:06.000 AM kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
    7/10/13 6:53:06.000 AM kernel[0]: AppleIntelCPUPowerManagementClient: ready
    7/10/13 6:53:06.000 AM kernel[0]: BTCOEXIST off
    7/10/13 6:53:06.000 AM kernel[0]: BRCM tunables:
    7/10/13 6:53:06.000 AM kernel[0]: pullmode[1] txringsize[  256] txsendqsize[1024] reapmin[   32] reapcount[  128]
    7/10/13 6:53:06.000 AM kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@A/AppleMCP89AHCI/PR T0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageD river/ST9750420AS Media/IOGUIDPartitionScheme/Untitled 1@2
    7/10/13 6:53:06.000 AM kernel[0]: BSD root: disk0s2, major 1, minor 2
    7/10/13 6:53:06.000 AM kernel[0]: Kernel is LP64
    7/10/13 6:52:40.694 AM com.apple.launchd[1]: *** launchd[1] has started up. ***
    7/10/13 6:52:40.694 AM com.apple.launchd[1]: *** Shutdown logging is enabled. ***
    7/10/13 6:53:06.879 AM com.apple.launchd[1]: (com.apple.automountd) Unknown key for boolean: NSSupportsSuddenTermination
    7/10/13 6:53:08.000 AM kernel[0]: BCM5701Enet: Ethernet address c4:2c:03:34:56:ec
    7/10/13 6:53:08.000 AM kernel[0]: AirPort_Brcm4331: Ethernet address f8:1e:df:ea:54:f5
    7/10/13 6:53:08.000 AM kernel[0]: IO80211Controller::dataLinkLayerAttachComplete():  adding AppleEFINVRAM notification
    7/10/13 6:53:08.000 AM kernel[0]: IO80211Interface::efiNVRAMPublished(): 
    7/10/13 6:53:09.000 AM kernel[0]: IOBluetoothUSBDFU::probe
    7/10/13 6:53:09.000 AM kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x8213 FirmwareVersion - 0x0201
    7/10/13 6:53:09.000 AM kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
    7/10/13 6:53:09.000 AM kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
    7/10/13 6:53:09.000 AM kernel[0]: [IOBluetoothHCIController][start] -- completed
    7/10/13 6:53:09.000 AM kernel[0]: Previous Shutdown Cause: 5
    7/10/13 6:53:09.000 AM kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
    7/10/13 6:53:09.000 AM kernel[0]: NVDAStartup: Official
    7/10/13 6:53:09.000 AM kernel[0]: NVDANV50HAL loaded and registered
    7/10/13 6:53:09.519 AM com.apple.SecurityServer[15]: Session 100000 created
    7/10/13 6:53:10.000 AM kernel[0]: DSMOS has arrived
    7/10/13 6:53:11.454 AM airportd[27]: _processDLILEvent: en1 attached (down)
    7/10/13 6:53:11.000 AM kernel[0]: createVirtIf(): ifRole = 1
    7/10/13 6:53:11.000 AM kernel[0]: in func createVirtualInterface ifRole = 1
    7/10/13 6:53:11.000 AM kernel[0]: AirPort_Brcm4331_P2PInterface::init name <p2p0> role 1 this 0xffffff8017662400
    7/10/13 6:53:11.000 AM kernel[0]: AirPort_Brcm4331_P2PInterface::init() <p2p> role 1
    7/10/13 6:53:11.000 AM kernel[0]: Created virtif 0xffffff8017662400 p2p0
    7/10/13 6:53:11.941 AM hidd[56]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
    7/10/13 6:53:13.000 AM kernel[0]: macx_swapon SUCCESS
    7/10/13 6:53:14.349 AM configd[18]: setting hostname to "Pluto.local"
    7/10/13 6:53:14.000 AM kernel[0]: AirPort: Link Down on en1. Reason 1 (Unspecified).
    7/10/13 6:53:14.000 AM kernel[0]: en1::IO80211Interface::postMessage bssid changed
    7/10/13 6:53:14.354 AM configd[18]: network changed.
    7/10/13 6:53:18.272 AM com.apple.SecurityServer[15]: Entering service
    7/10/13 6:53:18.519 AM blued[65]: Read the UHE Info
    7/10/13 6:53:18.519 AM blued[65]: Read version 2 info.  Number of devices:2
    7/10/13 6:53:18.519 AM blued[65]: Class of device:     0x2580
    7/10/13 6:53:18.519 AM blued[65]: Device name: 'ervin's' length:8
    7/10/13 6:53:18.519 AM blued[65]: Finished reading the HID data
    7/10/13 6:53:18.519 AM blued[65]: Found a device with PID:0x030d VID:0x05ac
    7/10/13 6:53:18.520 AM blued[65]: Class of device:     0x2540
    7/10/13 6:53:18.520 AM blued[65]: Device name: 'ervinsiax’s Keyboard' length:23
    7/10/13 6:53:18.520 AM blued[65]: Finished reading the HID data
    7/10/13 6:53:18.521 AM blued[65]: Found a device with PID:0x0255 VID:0x05ac
    7/10/13 6:53:18.987 AM UserEventAgent[11]: Captive: [HandleNetworkInformationChanged:2435] nwi_state_copy returned NULL
    7/10/13 6:53:18.993 AM loginwindow[51]: Login Window Application Started
    7/10/13 6:53:20.506 AM awacsd[66]: Starting awacsd connectivity-78.3 (Apr 25 2013 19:22:44)
    7/10/13 6:53:20.510 AM awacsd[66]: InnerStore CopyAllZones: no info in Dynamic Store
    7/10/13 6:53:20.635 AM kdc[54]: label: default
    7/10/13 6:53:20.635 AM kdc[54]: dbname: od:/Local/Default
    7/10/13 6:53:20.635 AM kdc[54]: mkey_file: /var/db/krb5kdc/m-key
    7/10/13 6:53:20.635 AM kdc[54]: acl_file: /var/db/krb5kdc/kadmind.acl
    7/10/13 6:53:20.673 AM mDNSResponder[48]: mDNSResponder mDNSResponder-379.38.1 (Apr 25 2013 19:19:56) starting OSXVers 12
    7/10/13 6:53:21.537 AM coreservicesd[70]: FindBestLSSession(), no match for inSessionID 0xfffffffffffffffc auditTokenInfo( uid=0 euid=0 auSessionID=100000 create=false
    7/10/13 6:53:21.539 AM mds[47]: (Normal) FMW: FMW 0 0
    7/10/13 6:53:21.836 AM appleeventsd[62]: main: Starting up
    7/10/13 6:53:21.865 AM com.apple.usbmuxd[36]: usbmuxd-296.4 on Dec 21 2012 at 16:11:14, running 64 bit
    7/10/13 6:53:23.268 AM aosnotifyd[85]: bootstrap_look_up failed (44e)
    7/10/13 6:53:24.487 AM netbiosd[69]: Unable to start NetBIOS name service:
    7/10/13 6:53:24.499 AM digest-service[87]: label: default
    7/10/13 6:53:24.499 AM digest-service[87]: dbname: od:/Local/Default
    7/10/13 6:53:24.499 AM digest-service[87]: mkey_file: /var/db/krb5kdc/m-key
    7/10/13 6:53:24.499 AM digest-service[87]: acl_file: /var/db/krb5kdc/kadmind.acl
    7/10/13 6:53:24.501 AM digest-service[87]: digest-request: uid=0
    7/10/13 6:53:24.532 AM rpcsvchost[88]: sandbox_init: com.apple.msrpc.netlogon.sb succeeded
    7/10/13 6:53:24.538 AM digest-service[87]: digest-request: init request
    7/10/13 6:53:24.544 AM digest-service[87]: digest-request: init return domain: BUILTIN server: PLUTO
    7/10/13 6:53:25.353 AM systemkeychain[75]: done file: /var/run/systemkeychaincheck.done
    7/10/13 6:53:25.374 AM kdc[54]: WARNING Found KDC certificate (O=System Identity,CN=com.apple.kerberos.kdc)is missing the PK-INIT KDC EKU, this is bad for interoperability.
    7/10/13 6:53:25.387 AM configd[18]: network changed: DNS*
    7/10/13 6:53:25.393 AM mDNSResponder[48]: D2D_IPC: Loaded
    7/10/13 6:53:25.393 AM mDNSResponder[48]: D2DInitialize succeeded
    7/10/13 6:53:25.396 AM configd[18]: network changed: DNS*
    7/10/13 6:53:25.398 AM mDNSResponder[48]: Adding registration domain 40041775.members.btmm.icloud.com.
    7/10/13 6:53:25.671 AM kdc[54]: KDC started
    7/10/13 6:53:26.235 AM WindowServer[71]: Server is starting up
    7/10/13 6:53:26.652 AM locationd[52]: NOTICE,Location icon should now be in state 0
    7/10/13 6:53:27.102 AM awacsd[66]: Configuring lazy AWACS client: 40041775.p03.members.btmm.icloud.com.
    7/10/13 6:53:28.499 AM apsd[68]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    7/10/13 6:53:28.500 AM apsd[68]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    7/10/13 6:53:28.598 AM apsd[68]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    7/10/13 6:53:28.599 AM apsd[68]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    7/10/13 6:53:28.618 AM awacsd[66]: KV HTTP 0
    7/10/13 6:53:28.908 AM WindowServer[71]: Session 256 retained (2 references)
    7/10/13 6:53:28.908 AM WindowServer[71]: Session 256 released (1 references)
    7/10/13 6:53:30.969 AM WindowServer[71]: Session 256 retained (2 references)
    7/10/13 6:53:30.970 AM WindowServer[71]: init_page_flip: page flip mode is on
    7/10/13 6:53:31.409 AM WindowServer[71]: mux_initialize: Couldn't find any matches
    7/10/13 6:53:31.426 AM WindowServer[71]: GLCompositor enabled for tile size [256 x 256]
    7/10/13 6:53:31.426 AM WindowServer[71]: CGXGLInitMipMap: mip map mode is on
    7/10/13 6:53:33.627 AM awacsd[66]: KV HTTP 0
    7/10/13 6:53:34.283 AM WindowServer[71]: WSMachineUsesNewStyleMirroring: false
    7/10/13 6:53:34.283 AM WindowServer[71]: Display 0x003f003d: GL mask 0x2; bounds (0, 0)[0 x 0], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
    UUID 0xffffffffffffffffffffffff003f003d
    7/10/13 6:53:34.283 AM WindowServer[71]: Display 0x042730c0: GL mask 0x1; bounds (0, 0)[1280 x 800], 27 modes available
    Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9cc3, S/N 0, Unit 0, Rotation 0
    UUID 0x0000061000009cc300000000042730c0
    7/10/13 6:53:34.284 AM WindowServer[71]: Created shield window 0x5 for display 0x003f003d
    7/10/13 6:53:34.288 AM WindowServer[71]: Created shield window 0x6 for display 0x042730c0
    7/10/13 6:53:35.073 AM WindowServer[71]: Display 0x042730c0: GL mask 0x1; bounds (0, 0)[1280 x 800], 27 modes available
    Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9cc3, S/N 0, Unit 0, Rotation 0
    UUID 0x0000061000009cc300000000042730c0
    7/10/13 6:53:35.073 AM WindowServer[71]: Display 0x003f003d: GL mask 0x2; bounds (2304, 0)[1 x 1], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
    UUID 0xffffffffffffffffffffffff003f003d
    7/10/13 6:53:35.073 AM WindowServer[71]: CGXPerformInitialDisplayConfiguration
    7/10/13 6:53:35.073 AM WindowServer[71]:   Display 0x042730c0: MappedDisplay Unit 0; Vendor 0x610 Model 0x9cc3 S/N 0 Dimensions 11.26 x 7.05; online enabled built-in, Bounds (0,0)[1280 x 800], Rotation 0, Resolution 1
    7/10/13 6:53:35.073 AM WindowServer[71]:   Display 0x003f003d: MappedDisplay Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2304,0)[1 x 1], Rotation 0, Resolution 1
    7/10/13 6:53:36.423 AM WindowServer[71]: GLCompositor: GL renderer id 0x0102261a, GL mask 0x00000003, accelerator 0x00003c8b, unit 0, caps QEX|QGL|MIPMAP, vram 256 MB
    7/10/13 6:53:36.433 AM WindowServer[71]: GLCompositor: GL renderer id 0x0102261a, GL mask 0x00000003, texture units 8, texture max 8192, viewport max {8192, 8192}, extensions FPRG|NPOT|GLSL|FLOAT
    7/10/13 6:53:36.436 AM loginwindow[51]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
    7/10/13 6:53:36.454 AM hidd[56]: void __IOHIDLoadBundles(): Loaded 0 HID plugins
    7/10/13 6:53:36.607 AM WindowServer[71]: Unable to open IOHIDSystem (e00002bd)
    7/10/13 6:53:36.000 AM kernel[0]: virtual bool IOHIDEventSystemUserClient::initWithTask(task_t, void *, UInt32): Client task not privileged to open IOHIDSystem for mapping memory (e00002c1)
    7/10/13 6:53:37.536 AM WindowServer[71]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
    7/10/13 6:53:39.901 AM fseventsd[57]: Logging disabled completely for device:1: /Volumes/Recovery HD
    7/10/13 6:53:43.565 AM WindowServer[71]: Created shield window 0x7 for display 0x042730c0
    7/10/13 6:53:43.566 AM WindowServer[71]: Display 0x042730c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 3)
    7/10/13 6:53:43.586 AM WindowServer[71]: Display 0x042730c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 3)
    7/10/13 6:53:43.635 AM awacsd[66]: KV HTTP 0
    7/10/13 6:53:43.927 AM WindowServer[71]: Display 0x042730c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 3)
    7/10/13 6:53:43.979 AM launchctl[124]: com.apple.findmymacmessenger: Already loaded
    7/10/13 6:53:44.003 AM com.apple.SecurityServer[15]: Session 100004 created
    7/10/13 6:53:44.146 AM hidd[56]: CGSShutdownServerConnections: Detaching application from window server
    7/10/13 6:53:44.147 AM hidd[56]: CGSDisplayServerShutdown: Detaching display subsystem from window server
    7/10/13 6:53:44.186 AM loginwindow[51]: Login Window Started Security Agent
    7/10/13 6:53:44.361 AM SecurityAgent[133]: This is the first run
    7/10/13 6:53:44.362 AM SecurityAgent[133]: MacBuddy was run = 0
    7/10/13 6:53:44.367 AM coreaudiod[134]: Enabled automatic stack shots because audio IO is inactive
    7/10/13 6:53:45.276 AM UserEventAgent[125]: cannot find useragent 1102
    7/10/13 6:53:46.754 AM SecurityAgent[133]: spawn_via_launchd() failed, errno=5 label=[0x0-0x7007].com.apple.AppleSpell path=/System/Library/Services/AppleSpell.service/Contents/MacOS/AppleSpell flags=0
    7/10/13 6:53:46.754 AM SecurityAgent[133]: spawn_via_launchd() failed, errno=5 label=[0x0-0x7007].com.apple.AppleSpell path=/System/Library/Services/AppleSpell.service/Contents/MacOS/AppleSpell flags=0
    7/10/13 6:53:50.000 AM kernel[0]: USBMSC Identifier (non-unique): 20080718000003 0x928 0xa 0x0
    7/10/13 6:53:53.435 AM _netbios[143]: /usr/libexec/ntpd-wrapper: scutil key State:/Network/Global/DNS not present after 30 seconds
    7/10/13 6:53:53.790 AM _netbios[146]: Unable to resolve hostname(s)
    7/10/13 6:53:53.808 AM ntpd[81]: proto: precision = 1.000 usec
    7/10/13 6:54:02.217 AM SecurityAgent[133]: User info context values set for ervin
    7/10/13 6:54:02.657 AM SecurityAgent[133]: Login Window login proceeding
    7/10/13 6:54:03.085 AM loginwindow[51]: Login Window - Returned from Security Agent
    7/10/13 6:54:03.132 AM loginwindow[51]: ERROR | ScreensharingLoginNotification | Failed sending message to screen sharing GetScreensharingPort, err: 1102
    7/10/13 6:54:03.148 AM loginwindow[51]: USER_PROCESS: 51 console
    7/10/13 6:54:03.329 AM com.apple.launchd.peruser.503[149]: (com.apple.gamed) Ignored this key: UserName
    7/10/13 6:54:03.329 AM com.apple.launchd.peruser.503[149]: (com.apple.gamed) Ignored this key: GroupName
    7/10/13 6:54:03.330 AM com.apple.launchd.peruser.503[149]: (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
    7/10/13 6:54:03.337 AM loginwindow[51]: Connection with distnoted server was invalidated
    7/10/13 6:54:03.375 AM distnoted[153]: # distnote server agent  absolute time: 85.254455240   civil time: Wed Jul 10 06:54:03 2013   pid: 153 uid: 503  root: no
    7/10/13 6:54:03.640 AM awacsd[66]: KV HTTP 0
    7/10/13 6:54:04.135 AM blued[65]: kBTXPCUpdateUserPreferences gConsoleUserUID = 503
    7/10/13 6:54:04.868 AM com.apple.SecurityServer[15]: Session 100007 created
    7/10/13 6:54:07.730 AM WindowServer[71]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
    7/10/13 6:54:07.934 AM WindowServer[71]: Display 0x042730c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 3)
    7/10/13 6:54:08.208 AM NetworkBrowserAgent[184]: Starting NetworkBrowserAgent
    7/10/13 6:54:08.867 AM talagent[177]: _LSSetApplicationInformationItem(kLSDefaultSessionID, asn, _kLSApplicationIsHiddenKey, hidden ? kCFBooleanTrue : kCFBooleanFalse, NULL) produced OSStatus -50 on line 623 in TCApplication.m
    7/10/13 6:54:08.868 AM talagent[177]: _LSSetApplicationInformationItem(kLSDefaultSessionID, asn, TAL_kLSIsProxiedForTALKey, kCFBooleanTrue, NULL) produced OSStatus -50 on line 626 in TCApplication.m
    7/10/13 6:54:09.311 AM WindowServer[71]: kCGErrorNotImplemented: receive_notification: CPXSetEventFilter failed
    7/10/13 6:54:09.357 AM coreservicesd[70]: Can't change an application into stopped state for app App:"iTunes" [ 0x0/0xa00a]  @ 0x0x7fe8b9e31660 because it's already been started.
    7/10/13 6:54:09.521 AM WindowServer[71]: kCGErrorNotImplemented: receive_notification: CPXSetEventFilter failed
    7/10/13 6:54:09.000 AM kernel[0]: NTFS driver 3.10 [Flags: R/W].
    7/10/13 6:54:09.000 AM kernel[0]: NTFS volume name , version 3.1.
    7/10/13 6:54:09.000 AM kernel[0]: NTFS-fs warning (device /dev/disk1s1, pid 188): ntfs_system_inodes_get(): $LogFile is not clean.  Will not be able to remount read-write.  Mount in Windows.
    7/10/13 6:54:12.043 AM WindowServer[71]: kCGErrorNotImplemented: receive_notification: CPXSetEventFilter failed
    7/10/13 6:54:16.235 AM WindowServer[71]: CGXDisableUpdate: UI updates were forcibly disabled by application "Finder" for over 1.00 seconds. Server has re-enabled them.
    7/10/13 6:54:16.249 AM WindowServer[71]: reenable_update_for_connection: UI updates were finally reenabled by application "Finder" after 1.01 seconds (server forcibly re-enabled them after 1.00 seconds)
    7/10/13 6:54:17.067 AM SystemUIServer[178]: *** WARNING: -[NSImage compositeToPoint:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
    7/10/13 6:54:17.067 AM SystemUIServer[178]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
    7/10/13 6:54:24.396 AM CalendarAgent[190]: [com.apple.calendar.store.log.caldav.queue] [Got error on refresh, but not rectifying principal because it was manually configured: Error Domain=NSURLErrorDomain Code=-1009 "The Internet connection appears to be offline." UserInfo=0x7f9c328d8100 {NSUnderlyingError=0x7f9c32891880 "The Internet connection appears to be offline.", NSErrorFailingURLStringKey=https://ervin.siax%[email protected]/calendar/dav/ervin.siax%40gma il.com/user///ervin.siax%[email protected]/calendar/dav/ervin.siax%40gmail.com/user/, NSErrorFailingURLKey=https://ervin.siax%[email protected]/calendar/dav/ervin.siax%40gma il.com/user///ervin.siax%[email protected]/calendar/dav/ervin.siax%40gmail.com/user/, NSLocalizedDescription=The Internet connection appears to be offline.}]
    7/10/13 6:54:24.426 AM CalendarAgent[190]: [com.apple.calendar.store.log.caldav.queue] [Account refresh failed with error: Error Domain=NSURLErrorDomain Code=-1009 "The Internet connection appears to be offline." UserInfo=0x7f9c328da810 {NSUnderlyingError=0x7f9c32891880 "The Internet connection appears to be offline.", NSErrorFailingURLStringKey=https://ervin.siax%[email protected]/calendar/dav/ervin.siax%40gma il.com/user///ervin.siax%[email protected]/calendar/dav/ervin.siax%40gmail.com/user/, NSErrorFailingURLKey=

Maybe you are looking for