Display Issues + error connecting​? Yoga 13

Hey, I just sent my laptop in to get repaired after it fell on the ground at a laundromat and the screen shattered, $300 later and two months after, I'm finally using it again, but I've been only using it for about two weeks, and a few days ago I noticed that after I put my laptop on sleep, or walked away from it for a little bit, the screen went to black, and sometimes it would light up like normal, but it's been staying black and not booting out of sleep mode for the display. I've also noticed that my wireless connection will just drop for no reason, and when I try to disconnect or turn airplane mode on and off to reset it, the computer doesn't respond, and it will say "connecting" when airplane mode is on, and not respond in the network sidebar. 
Also, side note, I noticed when loading up my PC the lenovo loading screen is all pixelated vertical lines before it loads (something I see on this new screen, but I didn't see before the repair)..
Any suggestions? Could this be a firmware issue of some kind? Or something?

Hi have few issues when I have upgraded with Windows 10. So I have decided to do a full recovery: SETTINGS=> Update & security (windows update, recovery, backup)=> Recovery / Get started (Reset this PC)=> Remove everything (remove all your personnel files, apps and settings)=> Only the drive where windows is installedThis did a full fresh installation of windows 10 on my C drive, and it kept all my personnel files (docs, pictures, video, etc) on my D drive.now everything is working very good and fast. this may be the final solution for you, but at least this will setup a clean windows 10 on your yoga without any interference with some lenovo previous apps setting. Anyway I have attached my current setting for my display, hopping this will help: 

Similar Messages

  • Bizarre & Random Dashboards Display Issues/Errors

    Hello,
    I am on BI 4.1 SP04 and these dashboards were developed using an equivalent level on the client tool. (4.1 SP04)
    Sometimes we get very strange and often random display issues with our dashboards. I have attached screen shots for examples. Sometime we are missing data points from rendering on the charts, other times a line chart will extend into a bar chart.  Has anyone experienced this or have any idea what could cause this? It is very frustrating...
    Thanks for looking,
    Gary
    Missing data points on yellow line, yet line rendering with proper data (other wise would have 0's in places, etc)
    Green line missing dot on last end point
    In this example there are no dots on the yellow line or green line
    In this example the blue line has turned into massive columns extending across the charts

    This patch should resolve the issue in the last screenshot. I still face the other issues after upgrading to SP3 Patch 4. The dots in line chart take some time to appear. Also, if we use dynamic visibility, the components taking considerable time to appear sometimes. I hope this will also be fixed in later patches. Please share your experience too after applying the patch.

  • Display issue when connecting VGA monitor

    I'm having an isue when my Macbook Pro 13 inch 2011 is connected to my LG monitor via VGA, after a while the monitor does not display the image properly I don't know how best to describe it but it is like when a satellite signal is blocky and scrabled. Sorry for the poor description. This occurs both when the Macbook is connected to a monitor with the lid shut so that the monitor is the main display and with the monitor mirroring. I've had a 2008 Macbook with the same set up and there are no issues, anybody know how to solve this?

    See if what the user did in this thread:
    External Display is pixelated                    
    helps clear up your problems. Your symptoms sound similar to his, and he was able to correct it with video settings.

  • Hi, we are using mac mini's for our developement purpose. connecting the same through using Real VNC. Mac mini's are late 2009 and 2010. Now we have upgraded them to 10.8.5. after upgrading having display issues after launching the simulators

    hi, we are using mac mini's for our developement purpose. connecting the same through using Real VNC. Mac mini's are late 2009 and 2010. Now we have upgraded them to 10.8.5. after upgrading having display issues after launching the simulators, we are unable to view the icons we need to move the simulator (into different places) to view the icons.
    Also we are having Mac book pro's (Late 2009 & 2010) after upgrading them to 10.8.5. Unable to launch the mac, getting only white screen with apple icon.
    Let me know is there any specific Hardware (Graphic Cards) we need to use for the same.
    Please provide me the early solutions.
    Regards,
    Suresh.

    Hi, try this first...
    Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.

  • MDP to HDMI adapter causing issues while connecting Macbook air late 2013 edition to Projector. Projector shows grains on the display.

    MDP to HDMI adapter causing issues while connecting Macbook air late 2013 edition to Projector. Projector shows grains on the display.

    Sounds like you may have been in extended display mode. If so, all you had to do was drag a window to the projector display. Or, if you wanted mirrored mode, in display preferences select check mirror display.

  • Hello.I wanted to upgrade my iPad 1 to iOS 5.1 Over the Air.I was running iOS 5.0.1.It said it had an error connecting to server.It is already 5 hours i cant install this update.I also have an iPhone 4 with iOS 5.0.1 with the same issues.Help please!

    Hello.I wanted to upgrade my iPad 1 to iOS 5.1 Over the Air.I was running iOS 5.0.1.It said it had an error connecting to server.It is already 5 hours i cant install this update.I also have an iPhone 4 with iOS 5.0.1 with the same issues.Help please!

    You're probably running into the servers simply being swamped. Thousands of people are all going for the software update at the same time. Give it a try again and if that doesn't work, then try plugging it into your computer and trying it that way.
    I didn't get a notion of the size, it doesn't seem to be as big as the 700 meg 5.0 update, but it did take me 20+ minutes to download via cable internet so it's a large file. That in and of itself takes a while.
    If you're trying to download it directly to your iPhone, you'll need to be on wifi since I'm sure it's well over the 20 meg file size limit for 3G.

  • I am facing an issue " Denied connection per minute from one ip address" why this error occur and how to resolve it? is it really harmful for my TMG Server or not??

    I am facing an issue " Denied connection per minute from one ip address" why this error occur and how to resolve it? is it really harmful for my TMG Server or not??
    Error Description:
    The number of denied connections from the source IP address 10.0.0.X exceeded the configured limit. This may indicate that the host is infected or is attempting an attack on the Forefront TMG computer. 
    electrifying

    Hi,
    this may be a false/positive log record.
    First check the services and applications on the effecting machine (NETSTAT -ANO) to see which connections the machine has established or tries to establish.
    Check the machine against viruses and spyware.
    if you don't find any viruses / spyware or "mysterious" connections, create a connection exception limit in the flood mitigation settings on your TMG Server:
    http://www.isaserver.org/articles-tutorials/configuration-security/TMG-Firewall-Flood-Mitigation-Part1.html
    regards Marc Grote aka Jens Baier - www.it-training-grote.de - www.forefront-tmg.de - www.galileocomputing.de/3276?GPP=MarcGrote

  • HTTP Error 403 - Customized Error Page Display Issue

    Hi,
    I have included 403 in <error-code> in my web.xml and defined proper security constraints. But when I try to access my JSPs directly on Mozilla I see my error page but I try in Internet, I can't see the same page.
    Can someone help me?

    BalusC wrote:
    Then don't send the HTTP error status code in the headers. It would trigger IE to display friendly error pages.
    Best solution would be to let the error page invoke a redirect to self (or another error page) when the HTTP status code is 403, so that it becomes 200 (or anything in range of 200-399) so that IE won't be triggered to display friendly error pages. Best solution would be to let the error page invoke a redirect to self (or another error page) when the HTTP status code is 403You want to say that I should define a error page in my JSP where, when its called, I need to handle the 403 error. Please correct me if I'm wrong. I have defined *403 error code in my web.xml*.
    Again if possible can you please put down a sample how to do it?

  • Issue with OIDM - Error connecting to database -1

    In oidmon.log - "Error connecting to database -1".
    Config : OID on W2k
    Install created "ODS" user in the database. I can connect to the DB via SQLPLUS.
    Any idea what "-1" implies. Any help would be greatly appreciated

    Is this really a hard one to answer ? I have tried install, de-install, re-install nothing seems to work ?
    I would appreciate any help on this.
    Thx
    -- Geoff

  • Calendar Parameter displays an error when scheduling a report.

    Hello,
    We have Business Objects XI R1 (11.0.0.1282) and Crystal Reports XI (11.0.0.1282) on our Business Objects Server.
    When we run a report with a date parameter in it, in either Crystal Reports Designer on the server or via Business Objects Info View our date parameter prompt displays an error.
    The error shows on the prompt page, it has the word "Business Objects" in it and a red circle with a white X in the middle of it.  Then in two lines below it has the letter "i".  It looks something like the following...
    Business Objects X
    i
    i
    I'm not sure what has changed as we don't use date parameters that much.  On my local PC I have Crystal Reports XI (11.0.0.2495) and when I create a report with a date parameter and run it I don't get this issue. 
    I have previously had Crystal Reports Designer XI (11.0.0.2495) on the server however I repaired my Business Objects XI R1 installation to see if this would fix the issue.  This changed the version of Crystal Reports Designer from 11.0.0.2495 to 11.0.0.1282 but I still have the problem.
    I've had a look around the forums and there are a couple of other people with this question however no answers.  I've compared my local path variable with the server path variable and they are pointing to the same locations. 
    So I guess there is a common file that both Business Objects Info View and Crystal Reports Designer use.  If it's prompt.dll the version I have on my local PC is the same as the version on the server (11.0.0.2478).
    Any thoughts?
    Cheers,
    Chris Rutherford

    Hello,
    Just to let you know we figured this one out.  At some point I'd installed Crystal Reports Designer XI R1 on the server (must have service packed it as well).  This is a good thing as it's helped troubleshoot various connection issues etc.
    However this overwrote the prompt.dll file, the version of the new file was 11.0.0.2478.  I've since installed Business Objects XI R1 on my local machine without Crystal Reports to see what the version of the prompt.dll file would be.  It was 11.0.0.1282 so I replaced the newer prompt.dll with the older one and problem fixed.
    Cheers,
    Chris

  • Error connecting using JCO.Client: null

    Hi,
    I created a WD app which uses  the RFC FM.  I followed How-To-build-webdynpro.pdf document to create the WD and trying to deploy and run, I see the view page but when I trigger the action via button UI element I get following error as exception in the try catch block of execute method
    In the NWA I see
    Could not create JCOClientConnection for logical System: 'WD_MODELDATA_DEST' - Model
    An exception has occurred: Erorr accessing cache [region]='XCM_SESSION_SCOPE'.
    [EXCEPTION]
    com.sap.isa.core.cache.Cache$Exception: Cannot return access for region 'XCM_SESSION_SCOPE'. Cache is not ready
    I'm using following existing JCO definition by configuring them with correct parameters.  Tested them successfully
    WD_RFC_METADATA_DEST
    WD_MODELDATA_DEST
    What am I missing?  In SM04 tcode I see 2 connections are opened with 2 Megabyte not released for a long time.  I think if connections are released correctly it should drop to 1 megabyte.  Is there anything that I need to do just after execute method as shown below (I have replaced function module with <FM> in below code)
    try {
             wdContext.node<FM>_Input().current<FM>_Get_InputElement().modelObject().execute();
         } catch(Exception exception) {
              msgMgr.reportException(exception.getLocalizedMessage(), false);
          wdContext.nodeOutput().invalidate();
          msgMgr.reportSuccess("Success");
    The error is in the catch block which is displayed on the view page.
    Thanks
    Praveen
    I modified the above code and put in finally block to close the connections as follows, please let me know if this is OK.  I still get error message as "Error connecting using JCO.Client: null" but no additional connections in the SM04 after adding finally block.
    try {
             wdContext.node<FM>_Input().current<FM>_Get_InputElement().modelObject().execute();
         } catch(Exception exception) {
              msgMgr.reportException(exception.getLocalizedMessage(), false);
         }finally {
              // disconnect the connection
              wdContext.<FM>_Get_InputElement().modelObject().modelInstance().disconnectIfAlive();     
    Edited by: Praveen11 on Oct 5, 2009 9:06 AM

    Thanks Satish.
    The issue is resolved.  I think it was to do with permission, as I was running directly from NWDS deploy and run the session didn't have proper authorisation or something that was causing this error.
    When I copy pasted the URL in the correct browser session window I got no error and function module was successfully executed.   However the issue now is that values are not showing up in the view may be to do with mapping context or model  I'll review and post back as different thread.
    Thanks
    Praveen

  • PDF Document Display Issue - iPad Mini iOS 8.1

    I use my iPad heavily doing in-home sales. I rely on a combination of Box, PDF Expert, and Notability to retrieve and create information/documents.
    After updating my iPad Mini to iOS 8, I started having a display issue when trying to pull up my pricebook in front of a client from Box, where I've always pulled that document from. It showed me one page, and the rest were blank. I opened it in PDF Expert, thinking it was a Box issue - and this time the document was blurry. Being a good stubborn Irishman, I whipped out my iPhone 4 and opened the document fine in Box.
    Afterwards, I download DROPBOX, opened the file in iBooks, deleted applications and re-installed them - all with varying challenges and 0 results. The same document opens up great in my iPhone, just will no longer work correctly on my iPad Mini.
    Anyone else having this issue?

    Hey there Haparari,
    Welcome to Apple Support Communities.
    It sounds like your iPad is in recovery mode after running into an issue updating it to the latest version of iOS with iTunes on your computer. Take a look at the article linked below, it provides troubleshooting suggestions that’ll generally resolve that specific alert message that you’re seeing.
    Resolve iOS update and restore errors - Apple Support
    Check your security software
    Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
    Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
    Ciao,
    -Jason

  • Display issue coming out of sleep (w/ external display)

    Hey everyone,
    I've a MacBook Pro with Retina display. running 10.8.2 (and Win7 x64, via Bootcamp).
    I somtimes experience trouble coming out of sleep with no external display connected, if the MacBook was connected to an external display when I sent it to sleep and the integrated display's brightness was turned all the way down. Basically, the MacBook's integrated display won't light up. I then need to hold down the power button until the machine powers off, and start it up again. Only then will the display come on, and the machine start normally.
    I've been observing this with both an external Thunderbolt Display, and a TV connected through the HDMI port. I don't think this is a Mac OS issue, as I've seen similar behavior on this same machine, running Windows, under Bootcamp.
    An example scenario: I'll be using the Thunderbolt Display, or watching a movie on my TV, with the integrated display's brightness turned all the way down, and then, while the display is still connected, I will close the lid - The machine will go to sleep. I will then come the next day, and while the computer is asleep, disconnect the external display, and open the lid. The MacBook's integrated display will not light up, the brightness keys will not respond, and I will need to force-shutdown the machine, and start it again - it will then start up, and usually fall back to the lowest display resolution setting (even though I always use much higher resolutions on both the integrated and external displays).
    I'm guessing this is happening because the computer is expecting the external display that was connected to it, during its last operation, to still be available, and when it's not - it panics!
    Also, I had times where this happened, and a force-shutdown would not do the trick. I had to actually connect back to the external display, wait for the machine to start normally, take the integrated display's brightness back up, and disconnect the external display. The machine would then resume normal operation, and I would be able to disconnect the external display and work on the integrated display.
    Has anyone else experienced this, or anything similar?

    There we go. Here's the complete Console report, up until the reboot, which fixed things. I can't make anything out of this, but perhaps someone else can.
    13/10/12 8:37:29.010 AM loginwindow[535]: ERROR | -[LWScreenLock(Private) screenIsLockedTimeExpired:] | No lock state found, use built in check
    13/10/12 8:37:29.041 AM com.apple.launchd[1]: (com.apple.emond.aslmanager[2845]) Exited with code: 255
    13/10/12 8:37:29.468 AM hidd[540]: MultitouchHID: device bootloaded
    13/10/12 8:37:29.000 AM kernel[0]: Wake reason: EC.LidOpen EHC1 (User)
    13/10/12 8:37:29.000 AM kernel[0]: AirPort_Brcm43xx::powerChange: System Wake - Full Wake/ Dark Wake / Maintenance wake
    13/10/12 8:37:29.000 AM kernel[0]: RTC: PowerByCalendarDate setting ignored
    13/10/12 8:37:29.000 AM kernel[0]: Previous Sleep Cause: 5
    13/10/12 8:37:29.000 AM kernel[0]: The USB device HubDevice (Port 1 of Hub at 0x1d000000) may have caused a wake by issuing a remote wakeup (2)
    13/10/12 8:37:29.000 AM kernel[0]: IOThunderboltSwitch(0x0)::listenerCallbackStatic - Thunderbolt HPD packet for route = 0x0 port = 11 unplug = 0
    13/10/12 8:37:29.000 AM kernel[0]: IOThunderboltSwitch(0x0)::listenerCallbackStatic - Thunderbolt HPD packet for route = 0x0 port = 12 unplug = 0
    13/10/12 8:37:29.000 AM kernel[0]: The USB device HubDevice (Port 8 of Hub at 0x1d100000) may have caused a wake by issuing a remote wakeup (3)
    13/10/12 8:37:29.000 AM kernel[0]: TBT W (2): 0x0100 [x]
    13/10/12 8:37:29.000 AM kernel[0]: The USB device BRCM20702 Hub (Port 1 of Hub at 0x1d180000) may have caused a wake by issuing a remote wakeup (3)
    13/10/12 8:37:29.000 AM kernel[0]: The USB device Bluetooth USB Host Controller (Port 3 of Hub at 0x1d181000) may have caused a wake by issuing a remote wakeup (3)
    13/10/12 8:37:29.000 AM kernel[0]: AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitialized
    13/10/12 8:37:30.000 AM kernel[0]: MacAuthEvent en0   Auth result for: 68:7f:74:a1:24:96  MAC AUTH succeeded
    13/10/12 8:37:30.000 AM kernel[0]: wlEvent: en0 en0 Link UP virtIf = 0
    13/10/12 8:37:30.000 AM kernel[0]: AirPort: Link Up on en0
    13/10/12 8:37:30.000 AM kernel[0]: en0: BSSID changed to 68:7f:74:a1:24:96
    13/10/12 8:37:30.000 AM kernel[0]: en0::IO80211Interface::postMessage bssid changed
    13/10/12 8:37:31.000 AM kernel[0]: AirPort: RSN handshake complete on en0
    13/10/12 8:37:31.982 AM airportd[2838]: _doAutoJoin: Already associated to “w00***”. Bailing on auto-join.
    13/10/12 8:37:32.459 AM configd[17]: network changed: v4(en0+:192.168.1.104) DNS+ Proxy+ SMB
    13/10/12 8:37:32.498 AM UserEventAgent[11]: Captive: en0: Not probing 'w00***' (protected network)
    13/10/12 8:37:32.514 AM configd[17]: network changed: v4(en0!:192.168.1.104) DNS Proxy SMB
    13/10/12 8:37:35.780 AM com.apple.usbmuxd[518]: SCEDeviceSocketCallback USBMuxRecvWithTimeout failed for 0x10020cb90-iTunes/com.apple.iTunes:0->0x3d-192.168.1.101:0:0: 54 - Connection reset by peer
    13/10/12 8:37:35.781 AM iTunes[2272]: _receive_message (thread 0x117992000): Could not securely receive message size: SSL_ERROR_SYSCALL (Early EOF reached)
    13/10/12 8:37:36.284 AM iTunes[2272]: _send_message (thread 0x117992000): Could not securely send message size 406: SSL_ERROR_SYSCALL errno (Broken pipe).
    13/10/12 8:37:36.286 AM iTunes[2272]: AMDeviceStopSession (thread 0x117992000): Could not stop session with device 61: kAMDSendMessageError
    13/10/12 8:37:57.165 AM com.apple.usbmuxd[518]: _handle_timer heartbeat detected detach for device 0x3d-192.168.1.101:0!
    13/10/12 8:38:14.000 AM kernel[0]: NVDA::setPowerState(0xffffff8026183800, 0 -> 2) timed out after 45406 ms
    13/10/12 8:39:25.000 AM bootlog[0]: BOOT_TIME 1350110365 0
    13/10/12 8:39:30.000 AM kernel[0]: PMAP: PCID enabled
    13/10/12 8:39:30.000 AM kernel[0]: PMAP: Supervisor Mode Execute Protection enabled
    13/10/12 8:39:30.000 AM kernel[0]: Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
    13/10/12 8:39:30.000 AM kernel[0]: vm_page_bootstrap: 4043614 free pages and 117922 wired pages
    13/10/12 8:39:30.000 AM kernel[0]: kext submap [0xffffff7f80741000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff8000741000]
    13/10/12 8:39:30.000 AM kernel[0]: zone leak detection enabled
    13/10/12 8:39:30.000 AM kernel[0]: standard timeslicing quantum is 10000 us
    13/10/12 8:39:30.000 AM kernel[0]: standard background quantum is 2500 us
    13/10/12 8:39:30.000 AM kernel[0]: mig_table_max_displ = 74
    13/10/12 8:39:30.000 AM kernel[0]: TSC Deadline Timer supported and enabled
    13/10/12 8:39:30.000 AM kernel[0]: corecrypto kext started!
    13/10/12 8:39:30.000 AM kernel[0]: Running kernel space in FIPS MODE
    13/10/12 8:39:30.000 AM kernel[0]: Plist hmac value is    735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
    13/10/12 8:39:30.000 AM kernel[0]: Computed hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
    13/10/12 8:39:30.000 AM kernel[0]: corecrypto.kext FIPS integrity POST test passed!
    13/10/12 8:39:30.000 AM kernel[0]: corecrypto.kext FIPS AES CBC POST test passed!
    13/10/12 8:39:30.000 AM kernel[0]: corecrypto.kext FIPS TDES CBC POST test passed!
    13/10/12 8:39:30.000 AM kernel[0]: corecrypto.kext FIPS AES ECB AESNI POST test passed!
    13/10/12 8:39:30.000 AM kernel[0]: corecrypto.kext FIPS AES XTS AESNI POST test passed!
    13/10/12 8:39:30.000 AM kernel[0]: corecrypto.kext FIPS SHA POST test passed!
    13/10/12 8:39:28.977 AM com.apple.launchd[1]: *** launchd[1] has started up. ***
    13/10/12 8:39:30.000 AM kernel[0]: corecrypto.kext FIPS HMAC POST test passed!
    13/10/12 8:39:30.000 AM kernel[0]: corecrypto.kext FIPS ECDSA POST test passed!
    13/10/12 8:39:30.000 AM kernel[0]: corecrypto.kext FIPS DRBG POST test passed!
    13/10/12 8:39:30.000 AM kernel[0]: corecrypto.kext FIPS POST passed!
    13/10/12 8:39:30.000 AM kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
    13/10/12 8:39:30.000 AM kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
    13/10/12 8:39:30.000 AM kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled
    13/10/12 8:39:30.000 AM kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled
    13/10/12 8:39:30.000 AM kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=1 Enabled
    13/10/12 8:39:30.000 AM kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=3 Enabled
    13/10/12 8:39:30.000 AM kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=5 Enabled
    13/10/12 8:39:30.000 AM kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=7 Enabled
    13/10/12 8:39:30.000 AM kernel[0]: calling mpo_policy_init for TMSafetyNet
    13/10/12 8:39:30.000 AM kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
    13/10/12 8:39:30.000 AM kernel[0]: calling mpo_policy_init for Sandbox
    13/10/12 8:39:30.000 AM kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
    13/10/12 8:39:30.000 AM kernel[0]: calling mpo_policy_init for Quarantine
    13/10/12 8:39:30.000 AM kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
    13/10/12 8:39:30.000 AM kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
    13/10/12 8:39:30.000 AM kernel[0]: The Regents of the University of California. All rights reserved.
    13/10/12 8:39:30.000 AM kernel[0]: MAC Framework successfully initialized
    13/10/12 8:39:30.000 AM kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
    13/10/12 8:39:30.000 AM kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
    13/10/12 8:39:30.000 AM kernel[0]: ACPI: System State [S0 S3 S4 S5]
    13/10/12 8:39:30.000 AM kernel[0]: AppleIntelCPUPowerManagement: Turbo Ratios 889A
    13/10/12 8:39:30.000 AM kernel[0]: AppleIntelCPUPowerManagement: (built 23:03:24 Jun 24 2012) initialization complete
    13/10/12 8:39:30.000 AM kernel[0]: PFM64 (36 cpu) 0xf80000000, 0x80000000
    13/10/12 8:39:30.000 AM kernel[0]: [ PCI configuration begin ]
    13/10/12 8:39:30.000 AM kernel[0]: Sleep failure code 0x00000002 0x27006c00
    13/10/12 8:39:30.000 AM kernel[0]: console relocated to 0xfd0020000
    13/10/12 8:39:30.000 AM kernel[0]: PCI configuration changed (bridge=17 device=5 cardbus=0)
    13/10/12 8:39:30.000 AM kernel[0]: [ PCI configuration end, bridges 12 devices 16 ]
    13/10/12 8:39:30.000 AM kernel[0]: AppleThunderboltNHIType2::setupPowerSavings - GPE based runtime power management
    13/10/12 8:39:30.000 AM kernel[0]: AppleThunderboltNHIType2::start - type 2 sleep enabled
    13/10/12 8:39:30.000 AM kernel[0]: AppleThunderboltNHIType2::start - SXFP method found
    13/10/12 8:39:30.000 AM kernel[0]: mbinit: done [128 MB total pool size, (85/42) split]
    13/10/12 8:39:30.000 AM kernel[0]: Pthread support ABORTS when sync kernel primitives misused
    13/10/12 8:39:30.000 AM kernel[0]: rooting via boot-uuid from /chosen: D6807041-7128-30C2-9A2D-BFEEC3331CEE
    13/10/12 8:39:30.000 AM kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
    13/10/12 8:39:30.000 AM kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
    13/10/12 8:39:30.000 AM kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
    13/10/12 8:39:30.000 AM kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
    13/10/12 8:39:30.000 AM kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
    13/10/12 8:39:30.000 AM kernel[0]: AppleIntelCPUPowerManagementClient: ready
    13/10/12 8:39:30.000 AM kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/APPLE SSD SM768E Media/IOGUIDPartitionScheme/Customer@2
    13/10/12 8:39:30.000 AM kernel[0]: BSD root: disk0s2, major 1, minor 3
    13/10/12 8:39:30.000 AM kernel[0]: jnl: unknown-dev: replay_journal: from: 4020736 to: 10443264 (joffset 0x12ada000)
    13/10/12 8:39:30.000 AM kernel[0]: BTCOEXIST off
    13/10/12 8:39:30.000 AM kernel[0]: BRCM tunables:
    13/10/12 8:39:30.000 AM kernel[0]: pullmode[1] txringsize[  256] reapmin[   32] reapcount[  128]
    13/10/12 8:39:30.000 AM kernel[0]: highWaterMark: VO[  192]  VI[  192]  BE[  192]  BK[  192]
    13/10/12 8:39:30.000 AM kernel[0]: jnl: unknown-dev: examining extra transactions starting @ 10443264 / 0x9f5a00
    13/10/12 8:39:30.000 AM kernel[0]: jnl: unknown-dev: Extra txn replay stopped @ 11364864 / 0xad6a00
    13/10/12 8:39:30.000 AM kernel[0]: IOThunderboltSwitch(0x0)::listenerCallbackStatic - Thunderbolt HPD packet for route = 0x0 port = 11 unplug = 0
    13/10/12 8:39:30.000 AM kernel[0]: IOThunderboltSwitch(0x0)::listenerCallbackStatic - Thunderbolt HPD packet for route = 0x0 port = 12 unplug = 0
    13/10/12 8:39:30.000 AM kernel[0]: AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitialized
    13/10/12 8:39:30.000 AM kernel[0]: jnl: unknown-dev: journal replay done.
    13/10/12 8:39:30.000 AM kernel[0]: Kernel is LP64
    13/10/12 8:39:30.000 AM kernel[0]: hfs: Removed 27 orphaned / unlinked files and 2233 directories
    13/10/12 8:39:28.977 AM com.apple.launchd[1]: *** Shutdown logging is enabled. ***
    13/10/12 8:39:30.783 AM com.apple.launchd[1]: (com.apple.automountd) Unknown key for boolean: NSSupportsSuddenTermination
    13/10/12 8:39:31.000 AM kernel[0]: AirPort_Brcm4331: Ethernet address 20:c9:d0:48:ea:41
    13/10/12 8:39:31.000 AM kernel[0]: IO80211Controller::dataLinkLayerAttachComplete():  adding AppleEFINVRAM notification
    13/10/12 8:39:31.000 AM kernel[0]: IO80211Interface::efiNVRAMPublished(): 
    13/10/12 8:39:32.037 AM airportd[25]: _processDLILEvent: en0 attached (down)
    13/10/12 8:39:32.000 AM kernel[0]: createVirtIf(): ifRole = 1
    13/10/12 8:39:32.000 AM kernel[0]: in func createVirtualInterface ifRole = 1
    13/10/12 8:39:32.000 AM kernel[0]: AirPort_Brcm4331_P2PInterface::init name <p2p0> role 1 this 0xffffff802247e400
    13/10/12 8:39:32.000 AM kernel[0]: AirPort_Brcm4331_P2PInterface::init() <p2p> role 1
    13/10/12 8:39:32.000 AM kernel[0]: Created virtif 0xffffff802247e400 p2p0
    13/10/12 8:39:32.080 AM com.apple.SecurityServer[15]: Session 100000 created
    13/10/12 8:39:32.000 AM kernel[0]: AirPort: Link Down on en0. Reason 1 (Unspecified).
    13/10/12 8:39:32.000 AM kernel[0]: en0::IO80211Interface::postMessage bssid changed
    13/10/12 8:39:32.101 AM configd[17]: network changed.
    13/10/12 8:39:32.103 AM configd[17]: setting hostname to "w00fa.local"
    13/10/12 8:39:32.112 AM com.apple.SecurityServer[15]: Entering service
    13/10/12 8:39:32.193 AM UserEventAgent[11]: Captive: [HandleNetworkInformationChanged:2435] nwi_state_copy returned NULL
    13/10/12 8:39:32.000 AM kernel[0]: Previous Shutdown Cause: 3
    13/10/12 8:39:32.000 AM kernel[0]: IOBluetoothUSBDFU::probe
    13/10/12 8:39:32.000 AM kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x8286 FirmwareVersion - 0x0097
    13/10/12 8:39:32.000 AM kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
    13/10/12 8:39:32.000 AM kernel[0]: AGC: 3.2.11, HW version=3.2.19 [3.2.8], flags:0, features:20600
    13/10/12 8:39:32.000 AM kernel[0]: NVDAGK100HAL loaded and registered.
    13/10/12 8:39:32.586 AM fseventsd[144]: event logs in /.fseventsd out of sync with volume.  destroying old logs. (87566 7 87588)
    13/10/12 8:39:32.586 AM fseventsd[144]: log dir: /.fseventsd getting new uuid: A93F6A97-D1D4-4728-9B86-3AB73E58340C
    13/10/12 8:39:32.599 AM mDNSResponder[146]: mDNSResponder mDNSResponder-379.32.1 (Aug 31 2012 19:05:06) starting OSXVers 12
    13/10/12 8:39:32.645 AM systemkeychain[148]: done file: /var/run/systemkeychaincheck.done
    13/10/12 8:39:32.652 AM configd[17]: network changed: DNS*
    13/10/12 8:39:32.654 AM mDNSResponder[146]: D2D_IPC: Loaded
    13/10/12 8:39:32.654 AM mDNSResponder[146]: D2DInitialize succeeded
    13/10/12 8:39:33.245 AM tuxera_ntfs[509]: Version 2012.3.3 (Jul 26 2012 08:57:03) external FUSE 27
    13/10/12 8:39:33.245 AM tuxera_ntfs[509]: Mounted /dev/rdisk0s4 (Read-Write, label "BOOTCAMP", NTFS 3.1)
    13/10/12 8:39:33.245 AM tuxera_ntfs[509]: Cmdline options: recover,cbcio,sfmconv,streams_interface=openxattr,native_xattr,nfconv,aligned_i o,fstypename=txantfs,fssubtype=0,iosize=1048576,local,adaptiveuid,adaptivegid
    13/10/12 8:39:33.246 AM tuxera_ntfs[509]: Mount options: native_xattr,fstypename=txantfs,fssubtype=0,iosize=1048576,local,allow_other,no nempty,relatime,fsname=/dev/disk0s4,volname=BOOTCAMP
    13/10/12 8:39:33.000 AM kernel[0]: DSMOS has arrived
    13/10/12 8:39:33.000 AM kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
    13/10/12 8:39:33.000 AM kernel[0]: [IOBluetoothHCIController][start] -- completed
    13/10/12 8:39:33.000 AM kernel[0]: Universal Audio Apollo - 4.0.0.13440 (x86_64) Mar 12 2012 20:19:07
    13/10/12 8:39:33.000 AM kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
    13/10/12 8:39:33.000 AM kernel[0]: TUFS: starting (version 2012.4.17, x86_64 (10.6+), built Apr 17 2012, 11:40:41)
    13/10/12 8:39:33.246 AM tuxera_ntfs[509]: License: Valid.
    13/10/12 8:39:33.246 AM tuxera_ntfs[509]: Ownership and permissions disabled, configuration type 1
    13/10/12 8:39:33.301 AM fseventsd[144]: check_vol_last_mod_time:XXX failed to get mount time (22; &mount_time == 0x10ee45528)
    13/10/12 8:39:33.301 AM fseventsd[144]: log dir: /Volumes/BOOTCAMP/.fseventsd getting new uuid: C0009105-8F61-43E9-8563-1BB388632E71
    13/10/12 8:39:33.393 AM hidd[540]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
    13/10/12 8:39:33.409 AM kdc[538]: label: default
    13/10/12 8:39:33.409 AM kdc[538]:           dbname: od:/Local/Default
    13/10/12 8:39:33.409 AM kdc[538]:           mkey_file: /var/db/krb5kdc/m-key
    13/10/12 8:39:33.409 AM kdc[538]:           acl_file: /var/db/krb5kdc/kadmind.acl
    13/10/12 8:39:33.432 AM appleeventsd[545]: main: Starting up
    13/10/12 8:39:33.435 AM kdc[538]: WARNING Found KDC certificate (O=System Identity,CN=com.apple.kerberos.kdc)is missing the PK-INIT KDC EKU, this is bad for interoperability.
    13/10/12 8:39:33.451 AM com.apple.usbmuxd[518]: usbmuxd-296.3 on Jul 25 2012 at 00:28:37, running 64 bit
    13/10/12 8:39:33.507 AM loginwindow[535]: Login Window Application Started
    13/10/12 8:39:33.508 AM kdc[538]: KDC started
    13/10/12 8:39:33.510 AM awacsd[549]: Starting awacsd connectivity-78 (Jul 26 2012 14:37:46)
    13/10/12 8:39:33.512 AM apsd[551]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    13/10/12 8:39:33.513 AM apsd[551]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    13/10/12 8:39:33.000 AM kernel[0]: macx_swapon SUCCESS
    13/10/12 8:39:33.513 AM awacsd[549]: InnerStore CopyAllZones: no info in Dynamic Store
    13/10/12 8:39:33.520 AM aosnotifyd[552]: bootstrap_look_up failed (44e)
    13/10/12 8:39:33.539 AM locationd[536]: NOTICE,Location icon should now be in state 0
    13/10/12 8:39:33.539 AM locationd[536]: locationd was started after an unclean shutdown
    13/10/12 8:39:33.611 AM apsd[551]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    13/10/12 8:39:33.613 AM coreservicesd[27]: FindBestLSSession(), no match for inSessionID 0xfffffffffffffffc auditTokenInfo( uid=0 euid=0 auSessionID=100000 create=false
    13/10/12 8:39:33.615 AM mds[532]: (Normal) FMW: FMW 0 0
    13/10/12 8:39:33.619 AM WindowServer[567]: Server is starting up
    13/10/12 8:39:33.624 AM WindowServer[567]: Session 256 retained (2 references)
    13/10/12 8:39:33.624 AM WindowServer[567]: Session 256 released (1 references)
    13/10/12 8:39:33.635 AM WindowServer[567]: Session 256 retained (2 references)
    13/10/12 8:39:33.636 AM WindowServer[567]: init_page_flip: page flip mode is on
    13/10/12 8:39:33.000 AM kernel[0]: en0: 802.11d country code set to 'US'.
    13/10/12 8:39:33.000 AM kernel[0]: en0: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
    13/10/12 8:39:33.898 AM fseventsd[144]: Logging disabled completely for device:1: /Volumes/Recovery HD
    13/10/12 8:39:34.000 AM kernel[0]: nspace-handler-set-snapshot-time: 1350110375
    13/10/12 8:39:34.000 AM kernel[0]: MacAuthEvent en0   Auth result for: 68:7f:74:a1:24:96  MAC AUTH succeeded
    13/10/12 8:39:34.831 AM WindowServer[567]: mux_initialize: Mode is dynamic
    13/10/12 8:39:34.847 AM WindowServer[567]: GLCompositor enabled for tile size [256 x 256]
    13/10/12 8:39:34.847 AM WindowServer[567]: CGXGLInitMipMap: mip map mode is on
    13/10/12 8:39:34.933 AM WindowServer[567]: WSMachineUsesNewStyleMirroring: true
    13/10/12 8:39:34.933 AM WindowServer[567]: Display 0x042803c0: GL mask 0x11; bounds (0, 0)[840 x 525], 54 modes available
    Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model a00f, S/N 0, Unit 0, Rotation 0
    UUID 0x000006100000a00f00000000042803c0
    13/10/12 8:39:34.933 AM WindowServer[567]: Display 0x003f003f: GL mask 0x8; bounds (0, 0)[0 x 0], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
    UUID 0xffffffffffffffffffffffff003f003f
    13/10/12 8:39:34.933 AM WindowServer[567]: Display 0x003f003e: GL mask 0x4; bounds (0, 0)[0 x 0], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
    UUID 0xffffffffffffffffffffffff003f003e
    13/10/12 8:39:34.933 AM WindowServer[567]: Display 0x003f003d: GL mask 0x2; bounds (0, 0)[0 x 0], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
    UUID 0xffffffffffffffffffffffff003f003d
    13/10/12 8:39:34.934 AM WindowServer[567]: Created shield window 0x5 for display 0x042803c0
    13/10/12 8:39:34.934 AM WindowServer[567]: Created shield window 0x6 for display 0x003f003f
    13/10/12 8:39:34.934 AM WindowServer[567]: Created shield window 0x7 for display 0x003f003e
    13/10/12 8:39:34.934 AM WindowServer[567]: Created shield window 0x8 for display 0x003f003d
    13/10/12 8:39:34.936 AM WindowServer[567]: Display 0x042803c0: GL mask 0x11; bounds (0, 0)[840 x 525], 54 modes available
    Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model a00f, S/N 0, Unit 0, Rotation 0
    UUID 0x000006100000a00f00000000042803c0
    13/10/12 8:39:34.936 AM WindowServer[567]: Display 0x003f003f: GL mask 0x8; bounds (1864, 0)[1 x 1], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
    UUID 0xffffffffffffffffffffffff003f003f
    13/10/12 8:39:34.936 AM WindowServer[567]: Display 0x003f003e: GL mask 0x4; bounds (1865, 0)[1 x 1], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
    UUID 0xffffffffffffffffffffffff003f003e
    13/10/12 8:39:34.936 AM WindowServer[567]: Display 0x003f003d: GL mask 0x2; bounds (1866, 0)[1 x 1], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
    UUID 0xffffffffffffffffffffffff003f003d
    13/10/12 8:39:34.936 AM WindowServer[567]: CGXPerformInitialDisplayConfiguration
    13/10/12 8:39:34.936 AM WindowServer[567]:   Display 0x042803c0: MappedDisplay Unit 0; Alias(0, 0x11); Vendor 0x610 Model 0xa00f S/N 0 Dimensions 13.03 x 8.15; online enabled built-in, Bounds (0,0)[840 x 525], Rotation 0, Resolution 2
    13/10/12 8:39:34.936 AM WindowServer[567]:   Display 0x003f003f: MappedDisplay Unit 3; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (1864,0)[1 x 1], Rotation 0, Resolution 1
    13/10/12 8:39:34.936 AM WindowServer[567]:   Display 0x003f003e: MappedDisplay Unit 2; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (1865,0)[1 x 1], Rotation 0, Resolution 1
    13/10/12 8:39:34.936 AM WindowServer[567]:   Display 0x003f003d: MappedDisplay Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (1866,0)[1 x 1], Rotation 0, Resolution 1
    13/10/12 8:39:34.936 AM WindowServer[567]: CGXMuxBoot: Boot normal
    13/10/12 8:39:34.998 AM WindowServer[567]: GLCompositor: GL renderer id 0x01022647, GL mask 0x0000000f, accelerator 0x00004733, unit 0, caps QEX|QGL|MIPMAP, vram 1024 MB
    13/10/12 8:39:35.001 AM WindowServer[567]: GLCompositor: GL renderer id 0x01022647, GL mask 0x0000000f, texture units 8, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
    13/10/12 8:39:35.001 AM WindowServer[567]: GLCompositor: GL renderer id 0x01024400, GL mask 0x00000010, accelerator 0x00004d23, unit 4, caps QEX|QGL|MIPMAP, vram 580 MB
    13/10/12 8:39:35.003 AM WindowServer[567]: GLCompositor: GL renderer id 0x01024400, GL mask 0x00000010, texture units 8, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
    13/10/12 8:39:35.006 AM loginwindow[535]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
    13/10/12 8:39:35.014 AM hidd[540]: void __IOHIDLoadBundles(): Loaded 0 HID plugins
    13/10/12 8:39:35.050 AM WindowServer[567]: Unable to open IOHIDSystem (e00002bd)
    13/10/12 8:39:35.092 AM WindowServer[567]: Created shield window 0x9 for display 0x042803c0
    13/10/12 8:39:35.092 AM WindowServer[567]: Display 0x042803c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferFormula (1.000000, 1.000000, 1.000000)
    13/10/12 8:39:35.108 AM launchctl[585]: com.apple.findmymacmessenger: Already loaded
    13/10/12 8:39:35.124 AM com.apple.SecurityServer[15]: Session 100005 created
    13/10/12 8:39:35.146 AM hidd[540]: CGSShutdownServerConnections: Detaching application from window server
    13/10/12 8:39:35.146 AM hidd[540]: CGSDisplayServerShutdown: Detaching display subsystem from window server
    13/10/12 8:39:35.163 AM loginwindow[535]: Login Window Started Security Agent
    13/10/12 8:39:35.223 AM SecurityAgent[594]: This is the first run
    13/10/12 8:39:35.223 AM SecurityAgent[594]: MacBuddy was run = 0
    13/10/12 8:39:35.249 AM WindowServer[567]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x042803c0 device: 0x10158a320  isBackBuffered: 1 numComp: 3 numDisp: 3
    13/10/12 8:39:35.281 AM coreaudiod[592]: 2012-10-13 08:39:35.280987 AM [AirPlay] Started browsing for _airplay._tcp.
    13/10/12 8:39:35.281 AM coreaudiod[592]: 2012-10-13 08:39:35.281405 AM [AirPlay] Started browsing for _raop._tcp.
    13/10/12 8:39:35.000 AM kernel[0]: virtual bool IOHIDEventSystemUserClient::initWithTask(task_t, void *, UInt32): Client task not privileged to open IOHIDSystem for mapping memory (e00002c1)
    13/10/12 8:39:35.965 AM UserEventAgent[587]: cannot find useragent 1102
    13/10/12 8:39:36.935 AM WindowServer[567]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
    13/10/12 8:39:36.955 AM WindowServer[567]: Display 0x042803c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferFormula (1.000000, 1.000000, 1.000000)
    13/10/12 8:39:36.965 AM WindowServer[567]: Display 0x042803c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferFormula (1.000000, 1.000000, 1.000000)
    13/10/12 8:39:37.000 AM kernel[0]: directed SSID scan fail
    13/10/12 8:39:39.274 AM SecurityAgent[594]: User info context values set for w00fa
    13/10/12 8:39:39.000 AM kernel[0]: MacAuthEvent en0   Auth result for: 68:7f:74:a1:24:96  MAC AUTH succeeded
    13/10/12 8:39:39.432 AM SecurityAgent[594]: Login Window login proceeding
    13/10/12 8:39:39.618 AM loginwindow[535]: Login Window - Returned from Security Agent
    13/10/12 8:39:39.631 AM loginwindow[535]: ERROR | ScreensharingLoginNotification | Failed sending message to screen sharing GetScreensharingPort, err: 1102
    13/10/12 8:39:39.657 AM loginwindow[535]: USER_PROCESS: 535 console
    13/10/12 8:39:39.000 AM kernel[0]: wlEvent: en0 en0 Link UP virtIf = 0
    13/10/12 8:39:39.000 AM kernel[0]: AirPort: Link Up on en0
    13/10/12 8:39:39.000 AM kernel[0]: en0: BSSID changed to 68:7f:74:a1:24:96
    13/10/12 8:39:39.000 AM kernel[0]: en0::IO80211Interface::postMessage bssid changed
    13/10/12 8:39:39.706 AM com.apple.launchd.peruser.501[610]: (com.apple.gamed) Ignored this key: UserName
    13/10/12 8:39:39.706 AM com.apple.launchd.peruser.501[610]: (com.apple.gamed) Ignored this key: GroupName
    13/10/12 8:39:39.708 AM com.apple.launchd.peruser.501[610]: (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
    13/10/12 8:39:39.712 AM loginwindow[535]: Connection with distnoted server was invalidated
    13/10/12 8:39:39.717 AM distnoted[615]: # distnote server agent  absolute time: 15.385943220   civil time: Sat Oct 13 08:39:39 2012   pid: 615 uid: 501  root: no
    13/10/12 8:39:39.000 AM kernel[0]: AirPort: RSN handshake complete on en0
    13/10/12 8:39:39.967 AM WindowServer[567]: Received display connect changed for display 0x42803c0
    13/10/12 8:39:39.998 AM WindowServer[567]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x042803c0 device: 0x10158a320  isBackBuffered: 1 numComp: 3 numDisp: 3
    Thanks!
    -w00f

  • TS3694 My iPhone 3gs got an update today ios 6.1.6 but when i press install update my phone shutdown and shows connect to itunes display, after i connect to itunes it shows unknown erro (306).....whats is happening and what should i do ?

    My iPhone 3gs got an update today ios 6.1.6 but when i press install update my phone shutdown and shows connect to itunes display, after i connect to itunes it shows unknown erro (306).....whats is happening and what should i do ?

    Take a look at this post: https://discussions.apple.com/thread/5036467?tstart=0
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    iTunes Store loads partially or returns "Error 306" or "Error 10054"
    Proxies, parental control settings and software, security or filtering software, or a bad iTunes Store cache can cause this.
    To address proxies, Remove Internet Options proxy settings and connect to the Internet without a proxy.
    To reset iTunes Store cache:
    In iTunes, choose iTunes > Preferences (Mac) or Edit > Preferences(PC).
    Click the Advanced tab.
    Click the "Reset cache" button.
    Click OK and see if the issue is resolved.
    Adjust Parental Controls in iTunes:
    Open iTunes.
    Access iTunes preferences:
    On a Mac: From the iTunes menu, choose Preferences.
    On a Windows PC: From the Edit menu, choose Preferences.
    Click the Parental Controls tab.
    Remove restrictions on Parental Controls.
    For more information on parental controls or content filtering software, seeiTunes 10.5 for Windows: May see performance issues and blank iTunes Store.
    For more information on other security software, see iTunes: Troubleshooting security software issues.

  • Device keep turning plain and displaying App error 602

    Dear Sirs,
    My BlackBerry  Curve 9300 is not functioning properly any more after i made BlackBerry ID on my PC to connect the device with the PC.  The device turning plain and displaying App error 602
    Could you please help me
    Thank You in advance
    Abdi Halim Musa

    Hi Abdi Halim
    This Knowledge Based will guide you to solve that problem: "App Error 602" appears on the BlackBerry smartphone or "App Error 602" appears on the BlackBerry smartphone running BlackBerry 7
    Good luck.
    • Click Likes to appreciate those who helps you
    • If your issue solved, mark the best post in your thread as Solution

Maybe you are looking for

  • Business Rule Repository has not been configured?

    Hi, In EAS trying to open Business Rules, I get "Repository has not been configured or you are not authorized to use Business Rules" (I get this with the admin creds) In details, "Error loading objects from Data Source", "SQLSyntaxExceptionError: ORA

  • SelectManyCheckbox item font

    I'm having a problem making the item text bold in a selectManyCheckbox. I have defined a css style: af|selectManyCheckbox::item-text.debtProvidercheckbox font-weight:bold; In my jspx, I set the checkbox sytle as: <af:panelGroupLayout layout="horizont

  • How do I reduce the font size in the blue browser header at top of page?

    The font in the browser page header is too large. I would like to change the size of the font.

  • IP1800 printer problem

    iP1800 printer isn't printing solid / dark black anymore. Anything that's supposed to be black is coming out light gray on white paper. Cartridge (#40) is half full, but a brand new cartridge does same thing. I've run all the deep cleaning and testin

  • Cannot receive goods in a prior period

    Hello, We are trying to receive goods against a PO, in period 12/2010. We were able to successfully do this until Jan 31. Feb 1 onwards, we are getting error message # M7053, saying that u201CPosting only possible in periods 2011/02 and 2011/01 in co