Display Issues for Yogapad 13

Recentluy I upgraded my windows version to 8.1. Mine is Yogapad 13 Inch. From then on all the games that used to work on a full screen before the update are now displayed in a small portion which is the size of 1/4th of the screen size at the center of screen. I tried to install the drivers again but the problem is not yet fixed. I am facing this problem with all most every games like AOE, Counter Strike, NFS Most Wanted etc., I had also tried the game settings also to change screen resolution etc., but none worked. Plz help me how to solve this issue.
Thanks in advance

Sort of same issue:
All day events scheduled from Entourage display incorrectly on iPhone/iPad as non-all-day events (which block out entire day/multiple days)
All day events scheduled from iPhone/iPad show up correctly in Entourage as all-day events, but incorrectly with an *extra day* added.

Similar Messages

How to display Issues for the projects which user can view in the Project Center View

Hello All,
In the project center view, at the bottom, we need to add one table, which can show the Issues for the projects that are displayed in the project center view.(Projects visible to the current user).
Example: A resource 1 can see the Projects Project 1, Project 2,Project 3 in the project center view. So resource 1 should be able to see all the issues that are entered against the Project 1, Project 2, Project 3, irrespective of the issue that has
been assigned to any resource.
Please help.

Hi,
You could simply edit the page and add the risks and issues webparts. This will display risks and issues assigned to the user.
Click on edit page, then add webpart. In the Project We App section, pick up the risk webpart and then the issue webpart. Finally drag them to the bottom of the page and close the page.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

Payslip display issue for retro periods of a wage type

Hi,
we have an issue with payslip display for the rate field of an wage type.
we are genaearting the amount of a wage type 2000 using T511K constant. and we have changed the Rate of this constant in the mid of pay period.
if we have split in WPBP then we are getting payslip display for old and new rate. which is fine.
however if we don't have WPBP split for retro periods then payslip is clubbing the old and new rates hence the diaplay is wrong.
ex: wrong dispaly for retro periods (08/2009 one record with RTE as 6 and for 09,2009 another record with RTE as 6)
wage type          rate             number      amonut
2000                   12                2                12      (rate should be 6 however it is diaplaying 12 as taking rate of 08 & 09,2009         periods where it is comg as 6+6=12 which is wrong)
right dispaly should be
wage type          rate             number      amonut
2000                    6                   2                12      (rate should be 6, i.e 6*2=12)
Thanks
Gayathri

Hi Gayatri,
First check the values in payroll log or RT table. If its displaying correctly in RT table and if its problem with Payslip, then ask the abaper to debug the program.
Also check the WPBP table in RT table, because as you told that if there are any changes in the mid of the month, then the amount may split.
And if you have written any PCR for this, then check the PCR, whether its overwriting with any values.
Just check the above points.
Thanks & Regards
Bharathi

Display issue for xRPM CAPACITY MANAGEMENT report on EP

Experts,
I am using xRPM 4.2 version. My BW is on release 700 with patch level 15 & EP on 7.0
I am tring to view the various reports uder capacity management on EP.
These reports are viewable correctly in BIW system but not able to display the same on EP.
I am new to this and seeking for proper guidance to resolve the issue.
Thanks,
xRPM consultant

Resolved

Calendar display issues for "All Day Events" coming from Exchange Server

My problem is with the display of All Day events. I'm running a 3gs, Outlook 2007 on winxp, connected to a Exchange 2007 server. When an all day event is put in for multiple days the phone calendar displays it as starting at midnight going to midnight, and sometimes wont display the event on the list view on the phone. I can correct the display by editing it on the phone and making it all day there, but then the category I assigned the event in outlook goes away in outlook. All day single day events work just fine. Any suggestions?

Sort of same issue:
All day events scheduled from Entourage display incorrectly on iPhone/iPad as non-all-day events (which block out entire day/multiple days)
All day events scheduled from iPhone/iPad show up correctly in Entourage as all-day events, but incorrectly with an *extra day* added.

Strange display issues for previously healthy SWFs

Many months ago I published SWFs via Xcelsius 2008 that were carefully tested and worked well. This week, it came to my attention that these SWFs are now displaying strangely under a variety of browsers and Flash Player versions (latest version tested was FP 9).
Symptoms of the problem include, as far as I can tell from just looking at the SWF, dynamic visibility not being respected and transparent objects losing their transparency. Hence, objects that are supposed to be hidden behind other objects, or objects that are not supposed to display, are doing the opposite.
The SWFs worked exactly as designed from last September up until this month, at some point. Has anyone else noticed anything like this?
I'm still trying to work out how I should go about root-causing this issue.

Hi,
I have this sort of issue not with swf but With XLF i have lost Complete Data in my XLF .The data tabs that were used to map the components were completly lost.So i always mantain backups at multiple locations which saved Me.
My suggestion would be here is Generate a new swf which was wokrking propelry last time.I think this will be fine..But the Symptons you are talking about it Quite strange and needs to look at it...
Can really understand what would be the reason for this.

Unit display issue for MDX

Hi,
Following is the issue what I face.
I issue a MDX query against an infocube. There is a calculated measure in the MDX query whose calculation is in the MDX statement itself(e.g. sales value/sales quantity). The result shows the unit of the calculated measure as "EUR KG" rather than "EUR/KG".
If I issue the MDX query against the query built on the same cube(the calculation of the keyfigure is in the bex query this time and not in the MDX statement) I get the proper unit as EUR/KG.
Can anybody suggest how the units can properly be displayed when queried directly against the cube?
Thanks,
Anurag.

Resolved

Issue for Production Query

Hi,
I'm having a situation when I print "Issue for Production" for an item, sometimes the batch issued printed out wrongly. I'm wondering is there a way to write a query to display issue for production (item code, item description, quantity, batch) based on production number? Please advise. Thank you for your help and time.
Cheers,
serene

Try the code below. You will have to replace the XXXXXXXXX with Document Number of the Production Order.
SELECT     dbo.OIGE.DocEntry,dbo.OIGE.DocNum, dbo.IGE1.ItemCode, dbo.IGE1.Dscription,
dbo.IBT1.BatchNum,dbo.IBT1.Quantity, dbo.IGE1.LineNum
FROM         dbo.OIGE INNER JOIN
                      dbo.IGE1 ON dbo.OIGE.DocEntry = dbo.IGE1.DocEntry
INNER JOIN dbo.IBT1 ON dbo.IGE1.ObjType = dbo.IBT1.BaseType
and dbo.OIGE.DocEntry = dbo.IBT1.BaseEntry and dbo.OIGE.DocNum = dbo.IBT1.BaseNum
and dbo.IGE1.LineNum = dbo.IBT1.BaseLinNum
and dbo.IGE1.ItemCode = dbo.IBT1.ItemCode
where dbo.IGE1.BaseType = 202
and dbo.OIGE.DocNum = XXXXXXXXX
order by dbo.IGE1.LineNum
Krishnan

Hi, we are using mac mini's for our developement purpose. connecting the same through using Real VNC. Mac mini's are late 2009 and 2010. Now we have upgraded them to 10.8.5. after upgrading having display issues after launching the simulators

hi, we are using mac mini's for our developement purpose. connecting the same through using Real VNC. Mac mini's are late 2009 and 2010. Now we have upgraded them to 10.8.5. after upgrading having display issues after launching the simulators, we are unable to view the icons we need to move the simulator (into different places) to view the icons.
Also we are having Mac book pro's (Late 2009 & 2010) after upgrading them to 10.8.5. Unable to launch the mac, getting only white screen with apple icon.
Let me know is there any specific Hardware (Graphic Cards) we need to use for the same.
Please provide me the early solutions.
Regards,
Suresh.

Hi, try this first...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.

Display issue with LiveCycle Designer ES4 for cropped PDF in WIN7

Hi,
I am having issue displaying the cropped PDF file in the LiveCycle Designer ES4. The PDF files are cropped 3 inches from bottom using Adobe Acrobat 8 Professional. It used to display properly when we have a WinXP machine but once we moved to a Win7 machine, it cannot display the top part of the PDF anymore. Can anyone help on how to fix the display issue? Thanks.
Kenny
Environment:
Adobe LiveCycle Designer ES4 V11.0.0.2013.0303.1.892433
Adobe Acrobat 8.0.0
Screenshots
Win 7, LiveCycle Designer does not display properly
Win XP, LiveCycle Designer used to display properly

Thanks vNohria.
I am having same issue with Adobe Acrobat 9. The Acrobat 9 cropped file is displaying properly under WinXP but have the same issue as above in Win7. This issue seems uncommon as I tried to look for similar issue and couldn't find any.
P.S. It's only the Design View in Win7 that has the issue, I can still see the file fine with Preview PDF in both enviornment.
Design View:
Preview PDF:

Display Components for issuing

Dear All,
How to display issuing components for which planned quantities has been fully issued:
System throws an alert message as : "Cannot display components for issuing; planned quantities have been fully issued"

Thanks for your reply..
but the scenario is
whether i can do any number of issue of production if planned qty and issued qty are equal for the same production order.
If i trying to do such scenario system throws an alert message as "Cannot display components for issuing;planned qty have been fully issued"
Please do the needful

I have an iphone 4s that is having display issues. If I turn the phone on, it vibrates to acknowledge it successfully turned on but the screen stays solid black. I can plug the phone into my computer and itunes will recognize the phone as well.

I have an iphone 4s that is having display issues. If I turn the phone on, it vibrates to acknowledge it successfully turned on but the screen stays solid black. I can plug the phone into my computer and itunes will recognize the phone as well. However, itunes can not do anything with the phone because the phone is locked and I can not unlock the phone because the screen is black.
>CURVEBALL!!!<
The screen does work though! Through trial and error along side a little troubleshooting, I was able to figure out that the screen will cut on after the phone dies completely. The phone has to die completely with no battery power left. Then if I plug the phone into a charge and wait a while for it to charge, the phone will turn on like nothing was ever even wrong with it. I charge the phone up to like 30% and turn it off then bam the phone turns on but the screen is solid black again.
I am currently in the process of waiting for the phone to die and when I turn the phone back on I am going to completely remove the auto-lock and lock code off of the phone for the time being.
Any other suggestions? Please help!

Sounds like the device was dropped at some point and damaged as a result.
Take it to Apple for evaluation and a replacement.

Display issue on brand new 2014 X1 Carbon Touch

So I was about to start raving about my X1C that I just received. Loving the display, the keyboard, build quality, etc. I had no gripes and was just browsing away when suddenly the screen did the full glitch. I recognize this as what happens when something's messed with the motherboard/display adapter. So I gave it a reset. All was normal and then it happened again. I was able to replicate it 3-4 times and it keeps happening. I never dropped it or anything. It was always just stationary.
I can't believe this. I had problems with the first gen non-touch and touch. I was hoping by now they have improved.
Link to image 1
Link to image 2
Link to image 3
Moderator note: images totalling more than 50k converted to links per forum rules: Lenovo Community Participation Rules

Hi,
Welcome to Lenovo Community Forums!
I’m sorry to hear that you have display issues in your brand new Lenovo X1 carbon.
From the snapshots, it seems like a cable/LCD issue. Is the display working fine when you connect it to an external monitor?
Since it’s a brand new machine, I strongly recommend you to contact our technical support for assistance.
Click here to open a link where you can select the country and get the exact contact support number. I’m sure they will be a great help.
Best Regards,
Mithun.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Display Issues with mini (Mid 2010) and LG L246WP

I recently purchased a new mini (Mid 2010 base model) and planned to use it with my 24" LG L246WP monitor, which is about 3 years old. The monitor has VGA, component, and HDMI inputs.
I used an HDMI-to-HDMI cable to connect the mini directly to the monitor, and the output is completely messed up. The mini recognized the monitor (titling the System Preferences > Display dialog with 'L246WP') and set it to the monitor's native resolution of 1920x1200, but on the monitor the image is cropped to what looks like a 4:3 aspect ratio and with part of the image shifted up and left so I cannot view the top menu bar or the left hand side of the desktop. The monitor's on-screen display shows 1080p in this mode.
The Display dialog also gives me an option for 1080p. I can select this and use the Underscan slider to resize the desktop output to fit on the screen, but it is still shifted left and must be resized smaller than the available display space (plus the total image is only 1080 pixels, not using the monitor's full native screen). In this mode, 1080p also shows on the monitor's on-screen display.
I tried 1024x768 to see if I could get a properly-positioned image, but the desktop was shifted just like in the 1920x1200 case and the monitor's on-screen display status still reported 1080p.
The monitor has a menu setting under an HDMI heading with "Video" and "PC" options, but changing this selection does not make a difference.
Since the monitor came out before HDMI was as widespread as it is today, it came with a DVI-to-HDMI cable, so I also tried using that cable with the HDMI-to-DVI adapter that came with the mini, but this did not make a difference either.
To prove it wasn't the HDMI cable, I connected the mini to my Samsung 6300 series 40" LED HDTV and with some tweaking of the Underscan slider the displayed image filled the screen perfectly.
I've searched the Internet and various forum threads (i.e. http://hardforum.com/showthread.php?t=1167222&page=63) seem to indicate this monitor can send a corrupted EDID that causes issues, especially with nVidia graphics drivers. On Windows you can use registry or driver hacks to override the EDID with the correct values, but on OS X this doesn't seem possible (I was hoping for a Terminal one-liner but it seems this doesn't exist). I have seen some mentions of the shareware SwitchResX (http://www.madrau.com), which looks like it gives you the option to override resolution settings, but I haven't tried this yet.
It also appears to me that the monitor is always interpreting the signal (or the mini is always sending the signal) as 1080p, even if I've set 1920x1200 in the Display dialog. I don't know if this is a defect in the monitor where it always assumes the HDMI input is a 1080p source (previous I used it with an Xbox 360 with no issues but that was 1080p HDMI), or if is a bug in the graphics drivers (or at least a lack of flexibility / miscommunication to the user trying to handle a corrupt EDID).
I asked my local Genius Bar for advice today (without bringing any hardware in) but was not told anything I didn't already know.
I'm trying to determine the best way to work through this issue. *My questions are:*
Would it make any difference if I used a Mini DisplayPort-to-DVI adapter (and then my DVI-to-HDMI cable to the monitor's HDMI input)?
What about a Mini DisplayPort-to-VGA adapter? In the past I used a 12" Powerbook (via a mini-DVI-to-VGA adapter) with this monitor and had no display issues like this, but I'd prefer to stick with a digital connection on my brand new mini.
Is SwitchResX the only practical way in OS X to override a corrupt EDID and force the mini to output a certain resolution?
Besides the various adapters and SwitchResX, is there anything else I should try before buying a new monitor?

Hello EPWilson4984.
I have been experiencing the same issues you described. Connecting my brand new Mac Mini to my Westinghouse 24”monitor (L2410NM, 1920x1200 pixel resolution) produces a very fuzzy and washed out image quality. The Mac recognizes the monitor and applies the right resolution (1920x1200), but it looks just awful. The EDID info is definitely not right.
Now, I tried your suggestion (DVI-to-HDMI), and similar suggestions from other threads, but nothing works. Nothing seems to work at all.
The main input for the monitor is HDMI, so whatever cable I use, in the end always has to connect to the monitor via HDMI. I tried all these combinations with zero success:
Mac mini -> HDMI cable -> monitor (result: fuzzy and blurry image)
Mac mini -> displayport –HDMI adapter-> HDMI cable -> monitor (result: fuzzy and blurry image)
Mac mini -> displayport –DVI adapter-> DVI-to-HDMI cable -> monitor (result: it gives me a blank screen, no image at all)
I’m running out of options. Don’t know what to do. The 24” monitor produces beautiful, crisp images when hooked to my Windows 7 PC. It looks horrible when connected to my brand new Mac Mini.
Any alternatives you may have come across? Please let me know, thank you.

0calweek issue for report output

0calweek issue for report output
I have loaded 0calweek in my infosource.0calweek format is displaying differently
in the report
File : 12005
PSA :12005
ODS : 012005
Cube : 012005
Report: 05/0120
I am loading first to PSA -> Process Manually to ODS -> Cube
I am using 0calweek is SAP Provided object.I am not doing anything in the 0calweek
Please advise on this.
Advance Thanks

I solved this issue. I changed the layout everything seems to working now.

Display Issues for Yogapad 13

Similar Messages

Maybe you are looking for