Display issues in Menu

Hi,
I have one iview, In the ivew, we have some options like "Menu". If you click on Menu, it will give dropdown of 5 options.
But the problem is, the last options in the dropdowns is not visible.
Pls suggest.
Jay.

Hi Jay...
The iview with 5 options of Dropdown means either ita a Web Dynpro Application Of Tree Structure or Customised Jsp Page..
If its a Web dynpro application then error could be in Coding...
Check out its preview after Deploying in NWDS..
Is it showing there 5th option of Dropdown..??
Thanks...

Similar Messages

Display issue with vertical windows start menu and dual screen

Hello everyone
I never reported it and I didn't find any information on google or mozilla support about this so here it is :
I am on windows 7 and I set up my windows start menu vertically. I also have 2 screens. These both points are important. If I put the start menu horizontally I do not have the issue anymore, and If I turn off one screen to have the display only on one screen, I do not have the issue anymore, which is a rare setup I guess so it could explain why this bug has never been detected.
HERE IS THE ISSUE
I have display issues on website with a big width, even the default add-ons Manager firefox page doesn't display correctly. Here is a screen shot:
http://img15.hostingpics.net/pics/368172bugFirefoxDisplay.png
So as you can see the disable and remove button on the right are not displayed, and at the bottom there isn't any scroll bar to scroll ! So I have no way to display the information on the right of the page, and it happens on a lot of other website (gmail, etc)
It is not such a big issue because my start menu is on my left screen and I can move firefox on the right screen to have a correct display.
I still think this is worth reporting this bug. I hope it is clear, feel free to ask questions if you didn't understand.

You can try to disable hardware acceleration in Firefox (you need to close and restart Firefox).
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration

Display Issues with mini (Mid 2010) and LG L246WP

I recently purchased a new mini (Mid 2010 base model) and planned to use it with my 24" LG L246WP monitor, which is about 3 years old. The monitor has VGA, component, and HDMI inputs.
I used an HDMI-to-HDMI cable to connect the mini directly to the monitor, and the output is completely messed up. The mini recognized the monitor (titling the System Preferences > Display dialog with 'L246WP') and set it to the monitor's native resolution of 1920x1200, but on the monitor the image is cropped to what looks like a 4:3 aspect ratio and with part of the image shifted up and left so I cannot view the top menu bar or the left hand side of the desktop. The monitor's on-screen display shows 1080p in this mode.
The Display dialog also gives me an option for 1080p. I can select this and use the Underscan slider to resize the desktop output to fit on the screen, but it is still shifted left and must be resized smaller than the available display space (plus the total image is only 1080 pixels, not using the monitor's full native screen). In this mode, 1080p also shows on the monitor's on-screen display.
I tried 1024x768 to see if I could get a properly-positioned image, but the desktop was shifted just like in the 1920x1200 case and the monitor's on-screen display status still reported 1080p.
The monitor has a menu setting under an HDMI heading with "Video" and "PC" options, but changing this selection does not make a difference.
Since the monitor came out before HDMI was as widespread as it is today, it came with a DVI-to-HDMI cable, so I also tried using that cable with the HDMI-to-DVI adapter that came with the mini, but this did not make a difference either.
To prove it wasn't the HDMI cable, I connected the mini to my Samsung 6300 series 40" LED HDTV and with some tweaking of the Underscan slider the displayed image filled the screen perfectly.
I've searched the Internet and various forum threads (i.e. http://hardforum.com/showthread.php?t=1167222&page=63) seem to indicate this monitor can send a corrupted EDID that causes issues, especially with nVidia graphics drivers. On Windows you can use registry or driver hacks to override the EDID with the correct values, but on OS X this doesn't seem possible (I was hoping for a Terminal one-liner but it seems this doesn't exist). I have seen some mentions of the shareware SwitchResX (http://www.madrau.com), which looks like it gives you the option to override resolution settings, but I haven't tried this yet.
It also appears to me that the monitor is always interpreting the signal (or the mini is always sending the signal) as 1080p, even if I've set 1920x1200 in the Display dialog. I don't know if this is a defect in the monitor where it always assumes the HDMI input is a 1080p source (previous I used it with an Xbox 360 with no issues but that was 1080p HDMI), or if is a bug in the graphics drivers (or at least a lack of flexibility / miscommunication to the user trying to handle a corrupt EDID).
I asked my local Genius Bar for advice today (without bringing any hardware in) but was not told anything I didn't already know.
I'm trying to determine the best way to work through this issue. *My questions are:*
Would it make any difference if I used a Mini DisplayPort-to-DVI adapter (and then my DVI-to-HDMI cable to the monitor's HDMI input)?
What about a Mini DisplayPort-to-VGA adapter? In the past I used a 12" Powerbook (via a mini-DVI-to-VGA adapter) with this monitor and had no display issues like this, but I'd prefer to stick with a digital connection on my brand new mini.
Is SwitchResX the only practical way in OS X to override a corrupt EDID and force the mini to output a certain resolution?
Besides the various adapters and SwitchResX, is there anything else I should try before buying a new monitor?

Hello EPWilson4984.
I have been experiencing the same issues you described. Connecting my brand new Mac Mini to my Westinghouse 24”monitor (L2410NM, 1920x1200 pixel resolution) produces a very fuzzy and washed out image quality. The Mac recognizes the monitor and applies the right resolution (1920x1200), but it looks just awful. The EDID info is definitely not right.
Now, I tried your suggestion (DVI-to-HDMI), and similar suggestions from other threads, but nothing works. Nothing seems to work at all.
The main input for the monitor is HDMI, so whatever cable I use, in the end always has to connect to the monitor via HDMI. I tried all these combinations with zero success:
Mac mini -> HDMI cable -> monitor (result: fuzzy and blurry image)
Mac mini -> displayport –HDMI adapter-> HDMI cable -> monitor (result: fuzzy and blurry image)
Mac mini -> displayport –DVI adapter-> DVI-to-HDMI cable -> monitor (result: it gives me a blank screen, no image at all)
I’m running out of options. Don’t know what to do. The 24” monitor produces beautiful, crisp images when hooked to my Windows 7 PC. It looks horrible when connected to my brand new Mac Mini.
Any alternatives you may have come across? Please let me know, thank you.

Display issues in FCP X on my MBP

Hi there,
I downloaded FCP X from the App Store this week and installed it and I am having a lot of display issues. My MCP is the 13.3" model from mid 2010 and the graphics card is compatible. I have 8 GB installed, so that should be sufficient as well. The areas where I am having display issues are:
* I don't see the film strip in the event browser. I do see the listing of the files in the event browser.
* I can not see the Inspector browser. Clicking on the i icon does not do anything and does not bring up the inspector browser
* I can not see any of the effects. Clicking on any of the effects buttons does not do anything and does not bring up the effects browser
I also notice that when resizing the FCP window, it does not get repainted properly.
One last thing that is annoying, but I found a work-around for this, is the splash window shows when FCP has loaded. It does not open FCP with the same layout as I last used, in fact it is only showing the menu bar and nothing else.
I hope that someone can help me with any of these problems. I was really excited about getting started with FCP X, but this has been a downer so far....
Thanks.
Edwin

Hi,
i had the same problem when i used the 10.0 version....but i solved in three ways:
Restarting the computer;
or
Creating a new event,clic on new event and the old clips appeared like magic in the old event if you try to access it again....
or
Click and keep pressed the Event icon (the purple star); try to put it in "Machintosh HD" or any hdd you have the event. Magically the clips are again in the browser....
Try......
Cheers
Lamberto

HT5706 I just purchased an AppleTV and am trying to connect AirPlay with my mac (2012 model) In 'system preferences displays' an airplay menu is listed but it says 'no device detected'. My AppleTV and macbook are connected to the same network. Any help?

I just purchased an AppleTV and am trying to connect AirPlay with my mac (2012 model) In 'system preferences > displays' an airplay menu is listed but it says 'no device detected'. My AppleTV and macbook are connected to the same network. Any suggestions why it is not working?

Troubleshoot the network as that is likely what is causing the issue.
Also, temporarily disable the firewall on the Mac and disable IPV6 on the computer.

Firefox does not display the basic menu line File Edit View etc. How do I get this menu to show. I have tried uninstalling and reinstalling, but that does not help

When I ask for help finding bookmarks, the answer tells me to click on bookmarks as shown in the illustration, but there is no such line displayed on my computer.

'''''"Firefox does not display the basic menu line File Edit View etc."''''': That is the Menu Bar; see below.
'''Menu Bar''' (File, Edit, View, History, Bookmarks, Tools, Help) Firefox 3.6.x versions allow the user to hide the Menu Bar. 
*Tap the ALT key or the F10 key, Menu Bar will display, click View, click Toolbars, click Menu Bar to place a check mark next to it, '''''OR'''''
*Press and hold the ALT key while pressing the letters VTM on your keyboard, then release the ALT key
*See: http://support.mozilla.com/en-US/kb/Menu+bar+is+missing
'''Other Toolbars''', see: https://support.mozilla.com/en-US/kb/Back+and+forward+or+other+toolbar+items+are+missing 
'''Status Bar''': click View, click Status Bar to place a check mark 
'''Full Screen Mode''': If you have no Toolbars or Tab Bar: Press F11 (F11 is an on/off toggle). See: http://kb.mozillazine.org/Netbooks#Full_screen 
Also see: http://kb.mozillazine.org/Toolbar_customization_-_Firefox#Restoring_missing_menu_or_other_toolbars
 
 
'''Other items that need your attention'''
The information submitted with your question indicates that you have out of date plugins with known security and stability issues that should be updated. To see the plugins submitted with your question, click "More system details..." to the right of your original question post. You can also see your plugins from the Firefox menu, Tools > Add-ons > Plugins. 
 
*Adobe PDF Plug-In For Firefox and Netscape
**Current versions are 9.4.2 and 10.0.1 (aka Reader X)
**More info about version 10 (aka Reader X)
***New Adobe Reader X (version 10) with Protected Mode was released 2010-11-19
***See: http://www.securityweek.com/adobe-releases-acrobat-reader-x-protected-mode
#'''Check your plugin versions''': http://www.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update Adobe Reader (PDF plugin):'''
#*From within your existing Adobe Reader ('''if you have it already installed'''):
#**Open the Adobe Reader program from your Programs list
#**Click Help > Check for Updates
#**Follow the prompts for updating
#**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
#*Download complete installer ('''if you do NOT have Adobe Reader installed'''):
#**Use the links below to avoid getting the troublesome "getplus" Adobe Download Manager and other "extras" you may not want
#**Use Firefox to download and SAVE the installer to your hard drive from the appropriate link below
#**Click "Save to File"; save to your Desktop (so you can find it)
#**After download completes, close Firefox
#**Click the installer you just downloaded and allow the install to continue
#***Note: Vista and Win7 users may need to right-click the installer and choose "Run as Administrator"
#**'''Download link''': ftp://ftp.adobe.com/pub/adobe/reader/
#***Choose your OS
#***Choose the latest #.x version (example 9.x, for version 9)
#***Choose the highest number version listed
#****NOTE: 10.x is the new Adobe Reader X (Windows and Mac only as of this posting)
#***Choose your language
#***Download the file, SAVE it to your hard drive, when complete, close Firefox, click on the installer you just downloaded and let it install.
#***Windows: choose the .exe file; Mac: choose the .dmg file
#*Using either of the links below will force you to install the "getPlus" Adobe Download Manager. Also be sure to uncheck the McAfee Scanner if you do not want the link forcibly installed on your desktop
#**''Also see Download link''': http://get.adobe.com/reader/otherversions/
#**Also see: https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox (do not use the link on this page for downloading; you may get the troublesome "getplus" Adobe Download Manager (Adobe DLM) and other "extras")
#*After the installation, start Firefox and check your version again.

Weird issues with menu font, Spotlight indexing, etc.

Hi all,
About a week ago, my PB G4 was freezing a lot; I'd have to hold the power button to shut it down, and if I tried to start it up again, it would chime and the light would come on, but the screen wouldn't light up and there would be no disc/fan sound. Or sometimes the screen would light up and the disc would boot, but it would either freeze at the grey screen or just after getting to my desktop. This was all similar to some issues I had over the summer when my hard drive was getting too full, but now I've got 22GB free (out of 90GB), so that shouldn't be a problem. I have OnyX and have run it a couple times in the last few months for cleanup.
So anyway, last week, I read what I could find on the forums here and in my user's guide. I tried resetting PRAM/NVRAM, but after the second chime sound (when it's okay to release the keys), it froze on the restart, so I wasn't sure if it worked or not. (I have since tried resetting this, and it's worked normally.) I booted from the Install DVD and reset the startup disk. I ran Apple Hardware Test, and everything checked out okay. My S.M.A.R.T. status was "verified." I also ran Disk Utility to repair permissions and disk, but got an error during disk repair that the repair could not be completed.
Somewhere in all of this, on one of the restarts, all of the text in the menu at the top of the screen changed so that each character was replaced with a small square with a capital letter A in it. This is annoying, though I've mostly been able to get around it using keystroke commands or just remembering where things were in the menus. The same character display issue is also true of the text beneath every icon on my desktop and in Finder windows-- though if I click on those as if to rename those files, I can see the name in a regular font. In the Finder, if I switch it to list view rather than icon view, the texts for the file and application names appear normal. When dialog boxes (for errors or commands) come up, the text in those sometimes appears as these little boxed characters.
Oddly enough, my computer's been working better since this happened... or at least, I haven't had any more restart issues. However, I've noticed some other weird things besides just the menu fonts. If I click the Spotlight icon to do a search, it always shows that it's indexing my computer. Yesterday I tried to print a Word document and just got an error simply saying "Word cannot print." I'm wondering if these and the menu font issues are all related to the disk errors that Disk Utility encountered, and what I should try next.
Anybody encountered this before?

Hi, rhiannon. Your hard drive's directory is seriously corrupt — so seriously that Disk Utility can't fix it. You have three choices:
1. If your hard drive's contents are backed up in the form of an up-to-date bootable clone of your hard drive from just before your problems began, simply clone the clone from your external backup drive back onto the internal drive. This will erase the internal drive, including whatever is corrupt on it, and replace its contents with the contents of your backup. You will be back to normal quickly.
2. Use a more potent disk Utility such as DiskWarrior or TechTool Pro to repair the hard drive directory. If you don't have all your data backed up elsewhere, this is the way to go.
3. If you have your data backed up, but not in a bootable clone form, start up from your Tiger installer DVD, erase your hard drive, and reinstall everything on it from original software installer discs and from your data backups, afterward applying all the necessary software updates again. This is very time-consuming.

Screen display issue with InDesign CS4 (Windows)

I just upgraded from CS2 to CS4. I can open and use InDesign with no problems, until I try to switch to another application. Then, when I try to go back to InDesign, all I can see is the portion of the bar at the top of the screen that shows the link to Bridge, the view options and a bit of the outline of a palette or two. I have a two monitor setup. Most of the palettes are on the auxillary monitor and they show up just fine. The main display is where I'm having the issue. I can toggle in and out of Photoshop with no display issues. I haven't tried working with anything else from the CS4 package besides InD and Photoshop. This was not an issue with any CS2 product (Dreamweaver, Fireworks, InDesign, Photoshop, Flash). Nor has it been an issue with any of the other software I am running (so far).
When the display vanishes, I can see the "data" from the program I was trying to toggle out of. For example, if I try to toggle between this page and InD right now, I can see most of this page except for the part of the page obscured by the outline of the control palette (that one reminiscent of pagemaker) and the little bits at the top. I can't see the project I'm working on. I can't see the File/Edit/etc. bar at the top of the page. A Control/Shift/Save will lock up the program completely. Then, I see the "save as" menu box (in addition to the browser screen around it) but the program is locked up. I can close everything on the computer and reboot and open InDesign to resume work--that is until I need to do something like edit a photo to drop into a layout. Then the issue occurs all over again.
Windows machine; XP Pro, service pack 3 build 2600; NVidea GeForce 9600 GT graphics card.

Bob, thanks for the info about the 6.0.2 patch. I'll try grabbing that today. This morning, on the first boot, I can't even see the program when I open it--just the snip of the command palette and part of the very top bar. Very irritating.
Peter, I have tried maximizing, closing, reopening, etc. everything else I can think of. Same issue. I finally just bit the bullet and went back to CS2, rebuilding the current project so I can get the work done by deadline. I'll look for new video drivers this afternoon after I get back on track timewise on this newsletter. Weird that this display issue should just affect the one Adobe program though, and not the others if it is a video driver problem. I didn't do a lot of work in Dreamweaver--just enough to see if it displayed the same weird behaviour. Nope. Nor does Photoshop. Nor does Bridge. Nor does Acrobat. nor does any other software on the machine.

Firefox displaying the nav menu strangely

Hi
I've built the following site and I'm having an issue with older versions of Firefox displaying the nav menu strangely.
http://www.mhn-ltd.com/
Basically the issue is, that when hovering over menu page links, they sporadically disappear and reappear. They div floated right in the header (containing "tel: 01246 xxxxxx Call now to book a visit") is also coming and going. If I delete that floated div, the nav menu works fine, but I ideally want to keep it in. What's also strange, is the problem is not happening on the gallery page, I've copied the code exactly from there to solve the issue but its still happening.
The issue is not happening in the new Firefox, just older versions. I'm on Mac OSX 10.5.8, so cannot upgrade the new version of Firefox, Im using 16.0.2. The problem doesn't exist in any other browser.
Thanks in advance

Hi there
Thanks for your replies, I'm using Firefox 16.0.2
After further investigation, I have found that it is the <select> option within the form in the right hand side div causing the issue.
In this [http://greglumleydesign.co.uk/index.html link,] I have left the <select> option in the form and the issue of the three a links (testimonials, helpful links and get in touch) disappearing in the nav menu when you hover over them is there.
In this [http://greglumleydesign.co.uk/test.html link] I have removed the <select> option within the form and the problem is fixed.
Is there any reason this would be happening?
Thanks

Display issue - small boxes being drawn out of place.

I am having a display issue on my desktop. It looks like small boxes of pixels are being drawn slightly out of place. This occurs across applications and just started after several months of usage without the problem. The only thing that I think really changed is I updated Google Chrome. It occurs mostly if I have a video playing on screen, but will still occur else where, generally when the screen is changing a lot (dragging windows, scrolling, etc). I can generally see that the squares being drawn are part of the video playing, but they are drawn outside the frame of the video.
I attached ascreenshot to better exemplify what I am describing. Has anyone seen this before and/or know how to fix it? I have not changed my display settings since I got the computer. Restarting the computer did not help.
Built-in iMac Display, 27-inch (2560 x 1440) AMD Radeon HD 6970M 1024 MB graphics

Thanks for your reply. After a restart, I ran Rember on all available memory. It used about 2.8 GB (out of 4GB) and passed every test.
I did manage to get a screenshot with the desktop itself being drawn incorrectly. I have seen menu items at the top of Google Chrome screw up a few times, but never for Finder.
This image looks just plain wrong:
And here you can see that the some of the terminal window is not drawn, or the desktop is drawn over it (this screenshot is while the terminal is in focus):
Are there any pure graphics card tests so I can confirm that that is what is wrong?
Thanks,

GPU/display issue?

Hi
I'm having a serious problem with a mid 2008 intel (alu) iMac (2.66GHz Core 2 Duo, running Mavericks). I think from my searching around that it may be a GPU issue, but could also be display.
The mac won't boot properly, getting no further than the grey screen with apple logo. If started up normally, this screen displays a checked pattern. It goes nowhere and the only way out is to do a hard shut down.
I can boot in safe mode though. In this mode, the mac generally seems to be functioning OK, but instead of checks I have a very fetching set of bands/stripes. They are sometimes pink and orange, but at the moment they are white and turquoise. Each band is made up of a series of eight stripes, each stripe a few pixels wide. There are 13 bands across the screen: the desktop can be seen underneath/through the bands and can also be seen normally between the bands (so I have normal bands and striped bands, each the same width, repeating across the screen). The cursor arrow attracts in own mini striped band - a square the same width as the main bands. (image upside down for some reason!).
As I say, my googling suggests that this is probably a GPU issue (the ATI Radeon HD 2600 Pro, not the apparently dodgy NVIDIA one that seems to have cursed some early 2008 imacs). What I don't get is why I can boot in safe mode but not at all otherwise - what gets disabled in safe mode that allows it to bypass what is otherwise an apparently total barrier to successful booting? When I try to boot normally and get stuck on the Apple logo, I can hear the mac working away, but is just doesn't seem able to go all the way. The really weird thing is that even when it is stuck at this stage, I can still remotely access the iMac from my MBP - I can open and copy files over the network. This suggests that it is in fact sort of booted, but just not displaying itself. I cannot screen share though. When booted in safe mode, I can screen share, and the stripes show up on the shared screen view on the MBP. Again, this suggests to me it is a GPU issue, not a display issue.
Unfortunately, this is my old iMac whcih i have just passed on to my mother in law, who is based 250 miles from me. I am visiting for a few days and so need to either get it sorted or conclude that it's toast (seems little point in forking out for a new GPU for a near six year old machine, even if I could swap it). I don't mind taking it apart (I swapped the hard drive last year) if that woudl help identify the source of the problem.
Any ideas much appreciated! Thanks in advance.

Hi Tammy (and anyone else who can help)
That's good news. Things at my end have gone a little strange. I put back all the extensions one by one and was able to boot nromally, even once all of them were back. I did however get a message that the ATI 2600 extension wasn't installed properly, but as it was still booting and I couldn't see any way to reinstall it (other than just popping it back in the extensions folder) I moved on. The screen was getting a bit worse, but still just striped rather than banded.
Having read further threads on similar problems, I decided to take the whole thing apart (great ifixit step by step guide). Nothing seemed amiss - all connections seemed secure, no obvious burnouts. Removed a LOT of dust and put everything back together again.
The machine started straight up when I plugged the power cord back in (I didn't get a chance to press the power button) - the screen flashed briefly round the edges and then stayed black. No stripes, no bands, no image.
I could hear the hard drive spinning, so pressed some buttons on the keyboard and got a warning tone, suggesting some sort of boot. I forced shut down and restarted and then tried to log in with the screen still blank. The bad news is that the screen has stayed black since then. The good news is I now have full remote access and can even screen share. The screen now has no bands when I screen share - I can see and interact with the full screen as normal and have managed to retrieve files etc over the network.
I am still deciding whether to order a new (second hand) video card. Looking in system profiler to get info on this it now shows no info AT ALL under graphics/display and in the 'more info' tab from the apple menu 'about this mac' version of system info it now says "No display detected". I am now unsure whether I have somehow 'blown' the display (I still get a brief white margin round the screen on start up) or whether both graphics card and screen are both goosed, or whether I should take it apart again to make sure the display itself is properly connected. If the graphics card was fubar, would I be able to see anything at all via screen sharing? I don't have an external display I can test it with. I don't want to fork out for GPU only to find it is the display.
Any views on next steps?
Col

Unibody Macbook display issue and keyboard backlight issues while booting

I have a 13" aluminum macbook which has been having some issues when booting up. The machine seems to be booting just fine all the way up to the log in screen. The display is normal and everything seems fine. After I log in, the various pieces of the screen start to display (desktop icons, menu bar, etc) and my wallpaper is visible. After a few seconds, the display seems to degrade and the wallpaper image is visible but distorted. It is almost as if the machine is in some sort of safe mode (pardon the windows reference).
Normally, I have my macbook connected to an external display and external mouse/keyboard. After a reboot, this issue occurs. If I put the macbook in sleep mode, and then wake it by clicking the external mouse, the display reappears normally and everything is fine.
The problem is when I am NOT connected to these external devices. The screen stays distorted (like it has lost its full color range) and there are other issues. The keyboard backlight seems to be disables and highlighting text does not work normally. I have tried rebooting, removing the battery and rebooting, resetting the SMC, removing recent applications (chrome, quicklook, etc.). Has anyone heard of or experienced this behavior?
Thanks.

Have you called Applecare? If you sent the machine in and it came back with a cracked case, that seems like an Apple repair to me.
As for the display issue - I think I would accept it and move on. Unfortunately, with these ever-higher resolution displays, we have more dead pixels. Since no one would pay $3000 for a display with 100% no dead pixel guarantee, Apple has to alot for a few dead pixels being acceptable inorder to keep prices reasonable.
http://docs.info.apple.com/article.html?artnum=22194
Check with other vendors, this is common practice with LCDs (even HDTVs).
I know it isn't great to hear this, but it is what it is.
iMac G5, MacBook Mac OS X (10.4.7)
iMac G5, MacBook Mac OS X (10.4.7)
iMac G5, MacBook Mac OS X (10.4.7)
iMac G5, MacBook Mac OS X (10.4.7)

Questions marks displayed in SAP menu

Hi Gurus,
We recently applied around 120 support packages and everything completed successfully, now we notice that applying the SP, Question marks ( ???????????????) are getting displayed in the menu area for some Tcodes. These question marks are getting displayed between the Environment and System menu.
I heard that it has something to with language update, also after an SAP Upgrade some language update needs to be done in order to remove these Question marks, is it so?
Please let me know how to fix this issue. Awaiting your valuable responses.
Regards,
Balakrishnan.

Hi,
check Note 764480 - SAP WinGUI I18N Trouble Shooting
also check your SAP GUI patch level
regards,
kaushal
Edited by: kaushal malavia on Apr 21, 2008 3:21 PM

I have an iphone 4s that is having display issues. If I turn the phone on, it vibrates to acknowledge it successfully turned on but the screen stays solid black. I can plug the phone into my computer and itunes will recognize the phone as well.

I have an iphone 4s that is having display issues. If I turn the phone on, it vibrates to acknowledge it successfully turned on but the screen stays solid black. I can plug the phone into my computer and itunes will recognize the phone as well. However, itunes can not do anything with the phone because the phone is locked and I can not unlock the phone because the screen is black.
>CURVEBALL!!!<
The screen does work though! Through trial and error along side a little troubleshooting, I was able to figure out that the screen will cut on after the phone dies completely. The phone has to die completely with no battery power left. Then if I plug the phone into a charge and wait a while for it to charge, the phone will turn on like nothing was ever even wrong with it. I charge the phone up to like 30% and turn it off then bam the phone turns on but the screen is solid black again.
I am currently in the process of waiting for the phone to die and when I turn the phone back on I am going to completely remove the auto-lock and lock code off of the phone for the time being.
Any other suggestions? Please help!

Sounds like the device was dropped at some point and damaged as a result.
Take it to Apple for evaluation and a replacement.

Display issue on brand new 2014 X1 Carbon Touch

So I was about to start raving about my X1C that I just received. Loving the display, the keyboard, build quality, etc. I had no gripes and was just browsing away when suddenly the screen did the full glitch. I recognize this as what happens when something's messed with the motherboard/display adapter. So I gave it a reset. All was normal and then it happened again. I was able to replicate it 3-4 times and it keeps happening. I never dropped it or anything. It was always just stationary.
I can't believe this. I had problems with the first gen non-touch and touch. I was hoping by now they have improved.
Link to image 1
Link to image 2
Link to image 3
Moderator note: images totalling more than 50k converted to links per forum rules: Lenovo Community Participation Rules

Hi,
Welcome to Lenovo Community Forums!
I’m sorry to hear that you have display issues in your brand new Lenovo X1 carbon.
From the snapshots, it seems like a cable/LCD issue. Is the display working fine when you connect it to an external monitor?
Since it’s a brand new machine, I strongly recommend you to contact our technical support for assistance.
Click here to open a link where you can select the country and get the exact contact support number. I’m sure they will be a great help.
Best Regards,
Mithun.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Display issues in Menu

Similar Messages

Maybe you are looking for