Display jitters, shakes, dances every other startup

When I start up, you can see all the usual startup images, except they are all jittering in a staticky way. Even on a solid gray screen, I see the jittering around the edges.
Most of the time, it gets through and I can select "Restart" from the dropdown menu. But sometimes it doesn't, and gets stuck on a gray screen and makes the loud whirring sound - so I have to hold down the power button.
Upon restarting, it's usually just fine. But I can be sure the jittering will be back on the next startup or the next wake up from Sleep. It seems like interference, but then why does it work every other startup?

this means that your dimm0 slot (which is actually your slot number 1) is detecting an error. hopefully it is just the ram module itself. try removing the ram from the dimm0 slot to see if the machine returns to normal. your user guide might explain how to install and remove ram. if not, post back with more details concerning your computer. you can find info by going to the system profiler (about this mac) and then going to "more info" and then looking at the hardware overview. it will tell you the processor speed, amount of memory, etc. [ 8 ) ]

Similar Messages

Display a label for every other category on a graph

I have a line graph created in Illustrator with years on the horizontal axis (1998, 1999, 2000, 2001, 2002, etc.). There is data for each year that will be plotted on the line, however I would only like to display every other year (1998, 2000, 2002, 2004, 2006, etc.). Is there a way to show every other year on the horizontal axis.

I can't leave the years out because there is data for those years. In Excel, there is an option to 1 display a label for every category, 2 to display a label for every other category, 3 to display a label for every third category. How do you do it in Illustrator. My table looks something like this but begins in 1980.
"2001"
52
"2002"
56
"2003"
81
"2004"
84
"2005"
91
"2006"
97
"2007"
102
"2008"
103
"2009"
104
"2010"
110
"2011"
106

Home folder on another disk wont mount every other startup

I have a Macbook Rev B that I recently upgraded with a 50gb SSD drive and an internal 640gb 7200rpm drive in the optical bay.
My OSX installation resides on a partition of the SSD and my home folder is set up through the Accounts control panel to load a folder on the exFat 640gb drive. I've only become really aware of the problem recently as I've been rebooting often while visiting my mom's house for the holidays but could have been occurring far longer since reboots are normally very scarce unless I'm booting into Windows 7 bootcamp.
Every other boot into OSX will bring me to login, I enter my password on my user Account and the bar will 'scroll' for near 5 minutes, then a plain osx background will appear along with an error dialog that reads something like 'your home folder could not be opened so we made this default setup for you'
I'll enter disk utility and my 640gb exFat volume will not be mounted. I've tried repairing permissions on the Startup Volume as well as repairing the exFat volume and neither make any difference. So I mount the exFat volume in DU and restart. This time logging into my UA will work fine and bring me to my desktop in a split second. At some point I will shutdown and next time I go to restart this will happen again. I have tried force shutdown in the middle of the 5 minute 'scrolling' time bar but this doesn't fix the problem.
The only cause I can think of is having previously created and edited an fstab file. I have an external backup/repair drive that I don't want to have all my repair volumes mounting when I plug the drive in. So I disabled their automounts in the fstab file however have not made any edits on the startup or exFat volumes I'm having trouble with. Maybe explicitly stating the exFat volumes automount preference in the fstab file will help but how is an exFat drive described in a fstab file?
also i'm running 10.6.5 with native exFat support so comments like 'just make it a Mac disk' is of no help to me. I used exFat so both the mac and windows partitions can easily share the drive.

I have found the issue that caused this and solved the problem...
The issue arose when deleting files from my windows partition from within mac os x. This created some permission inconsistencies for both mac os x and windows so that neither OS was able to delete the files properly. This somehow resulted in my secondary Media drive (on which my home folder lies) to not mount properly as described above.
What I did that solved the problem:
I first ran chkdisk while booting into windows (this actually happened automatically)
Then I navigated to C:/.Trashes/ (you must set up your explorer to view invisible files)
Some of these files were able to be deleted but others stayed.
I found the issues with these files to be:
Some were marked read only
Others had incorrect ownership permissions (found in properties of the file or folder)
Others had to have their sharing option set from nobody to everyone
And some were a combination of these
While setting new permissions I got many error notifications just ignore them, try multiple times using both apply and ok. If the file is nested try setting the sharing on each container folder one by one (do not try deleting the folders as you do this as it will reset sharing to nobody)
Conclusion: It may have just been chkdsk that fixed the issue though I don't believe it ran on the Media drive (the one with the mounting problems) or it may have been an issue with the "deleted" files and their permissions (Mac OS X not being able to delete them because they had incorrect permissions per its OS and Windows not understanding what to do with the files once OS X got to them and threw them on an invisible .Trash folder and tagging the files up with its own permissions.)

Pdfs display fine in every other browser and on pc, just not in ie

Can't view PDF on the web
have done EVERY single thing on this page to no avail, pdfs display fine in every other browser and on pc, just not in ie
I have acrobat pro 11 and windows 8.1
have tried every help article on the internet I can find and still nothing...am probably going to have to get used to another browser, this issue has taken hours and hours and still cannot get it to work

Install the latest update of Reader or Acrobat (done, no effect)
Adobe releases free security updates quarterly. It is important to update your version of Reader or Acrobat to the latest release. The updates often include fixes to common problems. Download the latest free update:
Note: Microsoft Windows 7 requires Adobe Reader 9.2 or later.
1.      Open Reader or Acrobat.
2.      Choose Help > Check for Updates. If a new update is available, it installs automatically.
3.      Once installed, restart your computer.
To the top<http://helpx.adobe.com/acrobat/kb/cant-view-pdf-web.html>
Refresh or reload the page (done, no effect)
Often, just refreshing the page allows the PDF to load fully.
Hold down the Shift key and press the    Refresh or    Reload button in the browser.
Try to view a different PDF (done, no effect)
Try viewing a different PDF. For example, see if this sample form<http://help.adobe.com/en_US/Acrobat/9.0/Samples/flatform.pdf> displays in your browser.(DOES NOT OPEN) If Acrobat or Reader can open the sample form, then the other PDF could be damaged or the web server could be having problems. If possible, contact the individual or company who manages the website.
1.      Try to view a PDF on your hard drive . (ALL PDFS OPEN ON HARD DRIVE)
To the top<http://helpx.adobe.com/acrobat/kb/cant-view-pdf-web.html>
Problem with the browser or its settings?
Use a different web browser (Pdf'S open in alternate browsers)
Certain conditions on your computer, such as security settings or browser cookies, can prevent you from viewing a PDF. Often, the fastest solution is to try to open the page using a different browser. Try any of the following browsers that you have not already tried:
Mozilla Firefox<http://www.mozilla.com/firefox/>
Microsoft Internet Explorer<http://www.microsoft.com/windows/internet-explorer/default.aspx>
Apple Safari<http://www.apple.com/safari/download>
For a list of compatible browsers for Reader and Acrobat X, see this list of Compatible web browsers<http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html>.
Switch to Compatibility View (Internet Explorer) (done, no effect)
Some websites display better in the Compatibility View of Internet Explorer. The Compatibility View displays a page as if it was an earlier version of the browser. For instructions on how to switch to this view, see one of these documents on the Microsoft website:
Internet Explorer 9: How to use Compatibility View in Internet Explorer 9<http://windows.microsoft.com/en-us/windows7/How-to-use-Compatibility-View-in-Internet-Expl orer-9>
Internet Explorer 8: Why are some web pages blank or incorrectly displayed in Internet Explorer<http://windows.microsoft.com/en-US/windows7/webpages-look-incorrect-in-Internet-Explorer>.
Restart your computer and try opening the PDF again (done, no effect)
Restart your computer, then open the web page again. Restarting clears the computer memory and memory cache. It is surprising how often simply restarting your computer resolves a display issue.
Delete temporary Internet files (Internet Explorer, Firefox, and Chrome) (done, no effect)
Clear the browser cache (sometimes called 'temporary Internet files') to ensure that you are viewing a fresh version of the page. When you open a web page, the browser saves a temporary copy so that it opens more quickly next time. You want to force the browser to load the entire page directly from the server, rather than displaying a stored copy.
Reset the Display PDF In Browser preference (done, no effect)
1.      In Reader or Acrobat, right-click the document window, and select Page Display Preferences.
2.      From the list at left, select Internet.
3.      Deselect Display PDF In Browser, and then click OK.
4.      Choose Edit > Preferences > Internet, select Display PDF In Browser, and then click OK.
5.      Try to open the PDF again from the website.
View PDF in 32-bit version of Internet Explorer or Safari (done, no effect)
Acrobat and Reader are 32-bit applications on Windows. If you try to open a PDF in a 64-bit version of Internet Explorer, the PDF opens in stand-alone Acrobat or Reader, not in Internet Explorer.
Remove DreamFactory (Firefox only) (done, no effect)
If you receive the error "Cannot use Adobe Reader to view PDFs in your web browser," do the following:
1.      Choose Start > Run, type appwiz.cpl in the Open text box, and then click OK to open the Add Or Remove Programs dialog box.
2.      Select Change Or Remove Programs in the Add Or Remove Programs dialog box, select DreamFactory Runtime for Netscape, Mozilla and Firefox, and click Change/Remove.
3.      Click OK in the Remove Programs From Your Computer dialog box.
To the top<http://helpx.adobe.com/acrobat/kb/cant-view-pdf-web.html>
Problem with Reader or Acrobat?
Remove unmatched or multiple versions of Reader or Acrobat (already did this including running a cleaner from the Adobe site) (done, no effect)
Repair Reader or Acrobat (done, no effect)
Reader or Acrobat could be damaged. Repairing the installation is a quick troubleshooting safeguard.
Repair from within Reader or Acrobat (done, no effect)
(Reader) Choose Help > Repair Adobe Reader Installation.
(Acrobat) Choose Help > Repair Acrobat Installation.
Repair using Control Panel (Windows) (done, no effect)
You can also repair your Acrobat or Reader installation using the Windows Control Panel.
Enable the Adobe PDF browser add-on (Internet Explorer) (done, no effect)
Make sure that the Adobe PDF browser add-on, AdobePDF.dll, is enabled.
Run Acrobat or Reader in a new local administrator account (done, no effect)
Optimize large PDF files (not the problem)
If the PDF file is 4 MB or larger, ask the provider to optimize the PDF file. For information about optimizing PDF files, see
Check the registry path for Acrobat or Reader (Windows) (done, no effect)
Repair the HKCR\AcroExch.Document registry key (Windows) (done, no effect)

How to display every other images in image indicator

Hi All,
I am using IMAQ to grab and save high freq and high resolution images. I have an image indicator directly from "Image Grab Acquire". So, the image indicator is displaying every single images at a very high frequency too. We have to display frames, but not necessarily every single one (enough so the operator can see what's going on). So, I am wondering how I can display, say every other images (such as all odd/even number of images), or jump over two and display the third?
Any help will be appreciated!
Thanks!
Wenlong
Solved!
Go to Solution.

Here are some general comments.
Image acquisition is "a horse of a different color" -- unlike many other I/O devices, the memory that holds the data (here called the "buffer") is managed by the driver, and isn't directly available to LabVIEW.
I'm guessing that you are using NI Video hardware, as you are using IMAQ functions (I've only used IMAQdx). Is this true? What camera are you using?
The IMAQ Extract Buffer (probably) "clocks" itself to the camera (I say "probably" because I don't know the hardware you are using). This means that the While loop containing it will run at the frame rate of the camera (hence you can easily calculate the frame rate, as your code shows).
This looks like an NI Demo routine, so I'm guessing that you don't have a lot of experience with Vision processing. If you've got a lot of other LabVIEW experience, you should be able to make the leap to vision, once you get the idea of how buffers work. Unfortunately, there's not as much in the way of tutorials and white papers on Vision as on other LabVIEW topics.
So to your question -- how to display every Nth image. Here's the key loop (which is lifted directly from your code):
As menioned above, this routine is "clocked" by the Extract Buffer function. What you do to display every N'th image is to put the Image control inside something like a Case statement that "fires" every Nth time.
Here's an "Nth" version of the above loop (some details omitted) --
We still drive the loop filling every buffer with a frame. But we then use the Integer Divide function to select the Nth image (those that have a remainder of 0 when i is divided by Nth) and wire the "image" line (it doesn't really hold an image) to the "Image" control, with the other case being "Default" (so all other valeus go there) and with nothing inside. Thus every Nth time through this loop, the output of Extract Buffer is wire to an Image (and displayed), the other N-1 times the wire goes nowhere.
Bob Schor

I cannot access facebook on my MacBook Pro. I am able to access every other website. When trying to access facebook it says that page cannot be displayed as safari cannot establish a connection.

I cannot access facebook on my MacBook Pro. I am able to access every other website. When trying to access facebook it says that page cannot be displayed as safari cannot establish a connection. I was able to access it just fine few weeks ago....
Please help!

Hi Justysiag,
If you are having issues opening a particular web site in Safari on your MacBook Pro, you may want to follow the steps in this article to see if you can resolve the issue -
Safari 7 (Mavericks): If Safari can’t open a website
http://support.apple.com/kb/PH17169
Thanks for using Apple Support Communities.
Best,
Brett L

Unless I repair my hard drive every other day I am unable to delete songs from iTunes or email messages from Postbox. I've only had an iMac for a few weeks, is this normal?

Unless I repair my hard drive every other day I am unable to delete songs from iTunes or email messages from Postbox. I've only had an iMac for a few weeks, is this normal?

Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR..; sudo chown -R $UID:staff ~ $_; sudo chmod -R u+rwX ~ $_; chmod -R -N ~ $_; } 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take a few minutes to run, or perhaps longer if you have literally millions of files in your home folder. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if it frightens you, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password dialog will open. You’re not going to reset a password.
In the dialog, select the startup volume ("Macintosh HD," unless you gave it a different name) if it's not already selected.
Select your username from the menu labeled Select the user account if it's not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Hi everybody, I am in Turkey on a long assignment, I need help solving a big problem on my macbook pro os 10.9.3. The other week my wife visited some website and now we have a redirect virus of some sort, and every other time when we click

Hi everybody, I am in Turkey on a long assignment, I need help solving a big problem on my macbook pro os 10.9.3. The other week my wife visited some website and now we have a redirect virus of some sort, and every other time when we click on a link or anywhere on the page we are redirected to this casino web site, https://casino.7bets10.com/tr/?from=hy9yKXD43jSC-8Oxbw4femNd7ZgqdRLk-dHJpeG9uaXR l. Its the same whether on Chrome or Safari. Does anyone have a solution, thank you!

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
Copy a line of text in this window to the Clipboard.
Paste into the window of another application.
Wait for the test to run. It usually takes a few minutes.
Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' \*AutoCad \*dropbox \*GoogleDr\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/ { next;} /(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' 's/0/Off/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;D12 26 48 59 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Animated gif files not working in FF5 ok in every other browser

Hi .
I am having problems getting animated gifs to play in firefox 5 i am using a photo gallery script to show these files it works in every other browser i have access to (most of them on Linux and windows Xp and win7 ) if i use FF5 as a file manager and navigate to the files they run but not from a web page this is only with firefox 4 and 5 not got previous to 4 to test .

Right . this looks like it may be a problem with the way FF5 is handling various methods of viewing images i use the following code .
<pre><nowiki><a class="thumbnail" href="#thumb"><img src="photos/IMG_7039 EOS-1D Mark III copy.jpg" width="100px" height="75px" border="0"><span><img src="photos/Animations/IMG_7039 EOS-1D Mark III copy.gif"></span></a></nowiki></pre>
along with css .
<pre><nowiki>(
.gallerycontainer{
position: relative;
/*Add a height attribute and set to largest image's height to prevent overlaying*/
.thumbnail img{
border: 1px solid blue;
margin: 0 5px 5px 0;
.thumbnail:hover{
background-color: transparent;
.thumbnail:hover img{
border: 1px solid blue;
.thumbnail span{ /*CSS for enlarged image*/
position: fixed;
background-color: lightyellow;
padding: 5px;
left: -600px;
border: 1px dashed gray;
visibility: hidden;
color: black;
text-decoration: none;
.thumbnail span img{ /*CSS for enlarged image displays the large image*/
border-width: 4;
padding: 12px;
.thumbnail:hover span{ /*CSS for enlarged image*/
visibility: visible;
top: 0;
left: 230px; /*position where enlarged image should offset horizontally */
z-index: 50;
)</nowiki></pre>
to create the gallery now if i navigate directly to the dir with the gif images in they work ok but if i use the gallery method they fail .
Tried safe mode no addons no change ..

IE 9 - can't sign in to ebay (every other site works fine, as before)

I can't sign in to ebay from my main computer; I can get to the main ebay website (www.ebay.com) and I can get to sign-in page, but when I enter my user ID and password, ebay displays an error page and returns immediately
to the sign-in page. The error page flashes by so quickly I can't read it, although I have tried probably 30 times or so to catch enough of the words to determine at least the subject of the problem. I've cleaned out the cache, including all cookies; I've
added several ebay pages to trusted sites, I've tried it with security levels set on lowest setting, and checked everything I know and still no results. I've also contacted ebay and done everything they suggested (which was actually very little), still with
no success. Ebay is not listed as a blocked site.
We have a laptop which accesses from our home WIFI network, and on it I am able to sign in just fine. Also, with Mozilla Firefox I am able to sign in just fine. So there is some small setting on my main computer that is preventing me from signing in. I've
searched all of the Tools - Internet Options tabs and settings, and can't find out what may be preventing my access. Pop-up blockers are off, both in IE9, Google, etc.
Every other website I've visited since this began happening works fine. The problem began when I downloaded the latest updates from Windows Update about 3 or 4 days ago. My IE9 is completely up to date, I use Windows 7 and ESET security software. Nothing
has changed in my software or in how I access ebay except for the latest Windows updates. Please advise; thank you.

Hi,
Tools>Internet Options>Security tab, click "Reset all zones to default"
Trusted Sites icon, 'Sites' button... remove Ebay from your Trusted Sites list..... websites work just as well in the (default) Internet Zone.
Create separate windows accounts for each user that shares your computer, so that nothing is changed on your windows account without your knowledge.
For the best security open Ebay with InPrivate browsing.
Ebay won't login properly if you have their site in the Trusted Sites list in IE because there is a security setting to prevent navigation to zones of lower integrity.... Ebay use a sub-domain to validate your credentials and have a number of different global
websites with different domains.
For consumer help with IE select the Help>Online Support menu from IE and follow the links for your windows and IE versions.
this forum is for Questions regarding Internet Explorer 8, 9 (and 10 Release Preview) for the IT Pro Audience. Topics covered are: Installation, Deployment, Configuration, Security, Group Policy, Management questions. If you are a consumer looking for answers
or to raise a question, it's highly recommended you head on over to http://answers.microsoft.com/en-us
Rob^_^

Every Other Frame is Blank &Green with MP4 Share

When rendering an imported Motion JPEG OpenDML- AVI clip to MP4, every other frame comes out solid green when played with Quicktime Pro and iTunes, or an iPod. I have no issues with playing the source AVI clip in Quicktime. I have no issue with playing other mp4 clips (h264 compression) in Quicktime. It is only MP4 clips (h264 compression) that have been rendered by PE 7.0 that seem to have this flickering issue. The blank frames are not displayed if the clip is re-imported in to PE 7 or if viewed in SUPER transcoder. I have played with the compatibility setting on the Advanced Export Settings dialog box, but to no avail. Also, this issue does not occur when exporting the project to WMV, but I need MP4 for broad compatibility reasons.
Other details: To be able to import the AVI (an MJpeg from a digital camera) I had to install an additional codec from Main Concept. This allowed the AVI clip to be viewable and playable in Premiere. I have tried to make this project as simple as possible: I trimmed the imported clip to 20 seconds and have no editing or effects, whatsoever. The clip plays fine inside Premiere. WHen I go to share it, I select iPod high quality preset and then render the file. It will not play properly in Quicktime Pro or iTunes. As mentioned, I can play it with SUPER transcoder, but that program is cumbersome and when transcoding the file, it ends up much larger than what Premiere exported.
I run an HP elitebook 8530w with:
Vista downgraded to XP
QX9300 Quadcore @ 2.53 Ghz
4G Ram
Premiere Elements 7.0
Operating System: Windows XP
Browser: Mozilla
Video capture card / driver: NVIDIA Quadro FX 770M (512MB)
Source was captured from Digital Still Camera (Nikon)

OK, I figured this out after 2 days:
MP4 rendering in PE 7.0 will produce a file with every other screen blank and green when utilizing the iPod presets. Oddly, even though it does not display properly with Quicktime or iTunes (which uses Quicktime) it WILL work when loaded to the iPod. This is an Apple issue, not a PE issue. You CAN solve the incompatability (between iPod and Quicktime/iTunes) problem by rolling back Quicktime to 7.4.5. There is also a discussion of MP4 compatibility issues with AppleTV @ http://discussions.apple.com/thread.jspa?messageID=5705015 These settings are the ones to use if you want an MP4 to play on your desktop. The upshot of that discussion for me was for desktop playback, you need to tinker with the "Advanced" Settings dialog box (accessed through the "Share" and then "Mobile Phones and Players" buttons.) You need the the Profile set to "Main" and the Compatibility set to "Standard." For iPod playback, you need the Profile set to "Baseline" and Compatibility set to "iPod." If you want to know why, go to Wikipedia.org and type in h.264.
Steve is right- to play with Motion Jpeg, you have to install additional codecs. PE then works just fine. I got mine at http://www.free-codecs.com/Motion_JPEG_Codec_download.htm

PHP Image Gallery with Images placed every other paragraph

Currently I have multiple images that where uploaded to the details page of Post 1. Every other paragraph I have an image displayed. With say 5 images.
What I would like is that the user can click on the image and open up a gallery (on the same page, like Lightbox Gallery) and view through the other 4 images related to Post 1, as these images may not be full resolution on the details page.
If I understand correctly, Lightbox makes a small thumbnail preview of the images, which I don't want, and lists them like a Gallery (Next to each other). Can anyone direct me on the best way to accomplish this?
Thanks,
Riley

Sorry for the confusion, I didn't mean lightbox actually created the thumbnails, but it produces them similar to the link you provided which I don't want. My image uploader does create thumbnail images, but only one per new post.
My format is similar to this:
POST 1
Text Paragraph1 (Image1 )
Text Paragraph1 (               )
Text Paragraph1 (               )
Text Paragraph1 (               )
(Image2) Text Paragraph2
(               ) Text Paragraph2
(               ) Text Paragraph2
(               ) Text Paragraph2
Now what I would like is that they can click on the picture and it opens up the image at say 600px X 600px resolution, with the next/prev buttons so they can browse through only the picutres on this page.
I have been trying to find an example but seems that some take you to a different page of just the image you clicked on, or a new page with the gallery.
I like how the lightbox gallery opens up on the same page, that way you close out of it and can continue reading. But I want to be able to have the images placed in different positions on the page, and not in a row like with a Gallery.
I hope I help clarified what I am trying to do.

Mini Only Starts Up Every Other Attempt

This is a mid 2007 Mini 2,1. It has been fine up until a few days ago. I was away and left it unplugged. When I returned, I plugged it in and started it. It went to a blank grey screen and sat. I pressed the power button again, and it immediately turned off. Pressed it again, and it started successfully.
Now, the same pattern repeats consistently. It starts up properly every other time I try it, and sits with a grey screen on the alternate attempts.
I cannot recall doing any recent updates, pref changes, etc. Does anyone have any suggestions on how to fix this?

Reset the SMC and PRAM. Sometimes they get scrambled and need to be reset:
SMC:
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.
PRAM:
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

Every other row (background color)

I want to keep it simple and in css. How can I get this to work properly so every other row has a yellowish background color with no gaps between the words.
This is what I have but its producing an odd result.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Untitled Document</title>
<style type="text/css">
    margin: 0px;
    padding: 0px;
div#footer{
    height:auto;
    background-color:green;
    clear:both;
    font-size:14px;
    width:800px;
div#footer ul{
        margin:0;
        padding:0;
        list-style:none;
div#footer li{
    width:155px;
    display:inline-block;
    text-align:center;
    vertical-align: top;
/* horizontal line breaks */
hr {
    border: 0;
    color: #323232;
    background-color: #323232;
    height: 1px;
    width: 95%;
    text-align: center;
.even {
    background-color: #FF9;
</style>
</head>
<body>
<div id="footer">
        <ul>
        <li class="even">01/15/2011</li>
        <li class="even">Broadway Brewhouse</li>
        <li class="even">New Phila, OH</li>
        <li class="even">10pm</li>
        <li class="even">330-343-9231</li>
        <hr />
        <li>06/11/2011</li> <li>Edelwiess Inn</li> <li>Sugarcreek, OH</li> <li>10pm</li> <li>330-852-3750</li>
        <hr />
        <li class="even">04/09/2011</li>
        <li class="even">Uhrichsville Moose Lodge (Open to the Public)</li>
        <li class="even">Uhrichsville, OH</li>
        <li class="even">TBD</li>
        <li class="even">740-922-9098</li>
        <hr />
        <li>01/15/2011</li> <li>Broadway Brewhouse</li> <li>New Phila, OH</li> <li>10pm</li> <li>330-343-9231</li>
        </ul>
</div>
</body>
</html>

To create coloured backgrounds to every other row use this.
#averages tr:nth-of-type(odd) {
background-color:#ccc;
Substitute the id of your table for mine and change the colour code to suit.

'Display a notification about every script error' not working in IE11

Hi all,
I want to see script errors when script errors occur in pages (as a developer). In older versions of IE when you enable 'Display a notification about every script error' a yellow icon appeared at the bottom of IE and when you clicked it, you could see what
was wrong in the scripting.
In IE11 this no longer works. Is this a bug ?
Callant
Callant

"This is actually by design. The scenario you are describing is better served by the F12 developer tools, and in IE11 we disabled this dialog entirely because of the performance overhead these old dialogs incurred and the fact that the F12 tools
are a better place for this information to surface."
- Christian Stockwell [MSFT], The Internet Explorer Team
Please see the Connect comments
here.
Please read:
Using the F12 developer tools
Regards,
Vincenzo Di Russo
Microsoft® MVP Windows Internet Explorer, Windows & Security Expert - since 2003.
Moderator in the Microsoft Community and TechNet Forums
My MVP Profile

Display jitters, shakes, dances every other startup

Similar Messages

Maybe you are looking for