Display key in the selection screen and Key & Text in the report

Hi,
For the infoobject in the query,
In the variable selection screen When i want to select any value it should display only key, and in the report i want to display key and text of that infoobject.
Is it possible?
Thanks
Rani

Hi
Display As
Here you determine whether and in what format the individual characteristic values of the characteristic are presented:
·        (Standard): The standard display type for characteristic values corresponds to the setting in InfoObject maintenance under Tab Page: Business Explorer.
·        No Display: The characteristic display is hidden. This function is useful, for example, with the currency/unit characteristic as the currencies are also shown in the key figures.
·        Key and Text: The characteristic values are displayed by their technical key and text.
·        Text: The characteristic values are displayed by their text.
·        Key: The characteristic values are displayed by their technical key.
·        Text and Key: The characteristic values are displayed by their text and technical key.
In the dropdown box below, you can select the type of text you want to use if you set a display type that contains text. The following options are available:
·        Standard: The shortest available text for the characteristic values is used as the text.
·        Short text: The short text for the characteristic values is used as the text.
·        Long text: The long text for the characteristic values is used as the text.
·        Medium text: The medium text for the characteristic values is used as the text.

Similar Messages

The green PHONE icon has dropped from the bottom of the home screen and isn't among the icons that I have installed. I can get to it by searching but how do I get it back on the bottom of the home screen?

The green PHONE icon has dropped from the bottom of the home screen and isn't among the icons that I have installed. I can get to it by searching but how do I get it back on the bottom of the home screen?

Reset home screen layout.
This is covered in the manual:
iPhone User Guide (For iOS 4.2 and 4.3 Software)

HT201210 Help, I just gave iTunes the assignment to update my iPhone5 to iOS7 and now it gives an unknown error (6). The iPhone is still hooked to my laptop, and shows the black screen and bright Apple with the horizontal bar, telling it's in the middle o

Help, I just gave iTunes the assignment to update my iPhone5 to iOS7 and now it gives an unknown error (6). The iPhone is still hooked to my laptop, and shows the black screen and bright Apple with the horizontal bar, telling it's in the middle of something. What should I do?

DFU mode? How do I do that? So far the only thing I can do is hold down both buttons to power it on and nothing is on the screen and it wont reconize on my computer....

How do I get off the settings screen and get back to the iPad desktop?

I am a first time user. How do I get off the settings screen and get back to the desktop?
Thanks

Press the home button.
It's the button on the face of the device.

Anyone else still able to access their phone by bypassing the lock screen and fingerprint recognition on the 5S??

Anyone else still able to access their phone by bypassing the lock screen and fingerprint recognition on the 5S??

Are you asking for help, or taking a survey?

My ipod is stuck on the apple screen and itunes doesnt recongnize the ipod ive help both buttons and it wont even turn off please help

Please help I just bought this Ipod used and didnt know it was stuck on this screen. It is stuck with the apple screen and wont turn off even after holding bothe the on/off button and home button at the same time, itunes does not even recongnize the device i need to find a way to do a complete restore as if it were just purchased please help

Have you tried connecting it to your iTunes library in recovery mode using the instructions in this Apple support document?
http://support.apple.com/kb/ht1808
B-rock

How to add a field to the selection screen and when the user enters ...

hi all,
can any one plesase send the code of how to add a field to seletiion screen and when the user enters in the field , it should be store in the database table , the table is MKPF and the field is BKTXT. Thanks.

Hi Kripa,
   If u r using PNP ldb then the screen u will get is the screen for that ldb and if u want to add some more fields then u define using selection-screen..as follows
SELECTION-SCREEN BEGIN OF BLOCK mysel WITH FRAME TITLE text-111.
PARAMETERS: n_in_en RADIOBUTTON GROUP g1,
            q_ev RADIOBUTTON GROUP g1.
SELECTION-SCREEN END OF BLOCK mysel.
SELECTION-SCREEN BEGIN OF BLOCK mysel1 WITH FRAME TITLE text-222.
PARAMETERS: r_date TYPE sy-datum DEFAULT sy-datum.
SELECTION-SCREEN END OF BLOCK mysel1.
SELECTION-SCREEN BEGIN OF BLOCK mysel2 WITH FRAME TITLE text-333.
PARAMETERS:f_ver(3) TYPE c DEFAULT 1,
           c_no(10) TYPE c DEFAULT '9D0161',
           u_id(15) TYPE c,
           password(15) TYPE c,
           r_email(30) TYPE c DEFAULT PARAMETERS: s_not TYPE c AS CHECKBOX.
PARAMETERS:t_run TYPE c AS CHECKBOX.
SELECTION-SCREEN END OF BLOCK mysel2.
SELECTION-SCREEN BEGIN OF BLOCK mysel3 WITH FRAME TITLE text-444.
SELECTION-SCREEN BEGIN OF BLOCK mysel4 WITH FRAME TITLE text-555.
PARAMETERS: p_ser RADIOBUTTON GROUP g2,
a_ser RADIOBUTTON GROUP g2.
SELECTION-SCREEN END OF BLOCK mysel4.
SELECTION-SCREEN BEGIN OF BLOCK mysel5 WITH FRAME TITLE text-666.
PARAMETERS:p_path TYPE string.
SELECTION-SCREEN END OF BLOCK mysel5.
SELECTION-SCREEN END OF BLOCK mysel3.
u will get this additional screen after the screen of ldb.
I hope this will help u..
Thanks & Regards
Ashu Singh.

When I pressed the power button it hangs on the welcome screen and what wrong with the system

When power on the MacPro it hangs on the welcome screen. What should I do to overcome this issue

I would recomend reseting the PRAM. A small amount of your computer’s memory, called “parameter random-access memory” or PRAM, stores certain settings in a location that Mac OS X can access quickly. The particular settings that are stored depend on your type of Mac and the types of devices connected to it. The settings include your designated startup disk, display resolution, speaker volume, and other information.
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Immediately press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.Continue holding the keys down until the computer restarts, and you hear the startup sound for the second time.
Release the keys.
Resetting PRAM may change some system settings and preferences. Use System Preferences to restore your settings. Hope this helps!

My MacBook Pro won't boot on the Mac side I get the gray screen and then halfway through the bar loading it turns off?

My MacBook Pro was downloading apps from iTunes and I shut the computer down at my I laws house or so I thought? When I pulled the computer out of my backpack it was still on? I tried to login and it kept spinning so I turned it off and now I only get a gray screen. I can boot it in the windows side and have an external hard drive with time machine backup on it but don't know how to load it without getting onto the Mac side?
Please help!

turn off the mac completely
as soon AS you hit power button press following 4 keys
Option + Command + P + R
that should reset it

I just loaded the 8.1 operating system on my iPad. It has been sitting for about 4 hours with the black screen and white apple with the bar underneath. What should I do?

I am having trouble after loading the 8.1 operating system on my ipad.
My iPad is model A1397 EMC 2424
MEID ********
Serial DL******JHH
64GB
I started loading 8.1 about 5 hours ago and it is still sitting with the black screen with the progress bar underneath. It shows that it is almost done loading - just has a tiny bit of the progress bar left.
<Edited by Host>

I Don't know if this will work for anyone else but just FYI - after loading 8.1 on my iPad it froze for several hours on the black screen with white Apple and progress bar underneath. It would not do anything. I thought I was doomed. I accidentay left it sitting overnight without plugging it Back into the charger. I meant to but got sidetracked and thought it was plugged in. During the night the battery was totally drained so this morning my iPad was dead. I plugged it into the charger and after a few minutes the battery icon came up showing it was charging. I gave it about 30 minutes and then turned it on and the new operating system came up. It looks like it might be ok now. I can't say I recommend this, but it worked for me.

My iPhone overheated while I was using it. An error icon same up on the lock screen and in place of the clock it was written 'Temperature' and in place of the wallpaper it was written "Your iPhone needs to cool down for normal use". What to do?

The iPhone has become extremely hot where the camera is located and as one moves his hands away from the camera, the temperature gets cooler. Any solution?
It is so hot around the camera that I cannot touch it.

Leave the phone alone and let it cool down.

Hey what does it mean when i charge my ipod and its on the battery screen and it turns to the apple screen then it turns off and it just keeps repeatedly doing it

it doesnt seem to wanna charge i just got it its an 8 gb black ipod with the camera on both sides

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

How to get the sql id and sql text for the pid which is completed.

Hi All,
I like to know how the get the details of sql_id and sql_text using the proecess which is completed already (ie., no more showing in the top command).
But I have the details of the process id.
Database name: 11g
os: sun os
thanks
Edited by: user9354175 on Nov 8, 2010 10:42 AM

If the session is still connected you might try this:
- query v$process where spid = os-process-number
- then join v$process to v$session using ADDR (in process) to PADDR (in session)
- then look at PREV_SQL_ID in v$session.
- use that to get the SQL_TEXT in for instance V$SQLAREA.
Could work, if all info is still in the SGA...

When I turn on my Macbook pro retina display i get a black screen and i noticed that the machine gets very hot, any clue how to make it work?

When I turn on my Macbook pro retina display, a black screen show up while I hear the normal start up sound. I noticed that the machine gets very hot, any clue how to make it work?

If the Mac is too hot to touch, take it in for service.
Apple - Find Locations

My iPod 2G (MC) wont go to the lock screen and is stuck at the apple logo, but when the restore thing appears I try to restore but it goes back to the aple logo

Exactly what the title says, HELP

Did you try to connect in recovery mode to restore? iPhone and iPod touch: Unable to restore

Display key in the selection screen and Key & Text in the report

Similar Messages

Maybe you are looking for