Display Key & Text In Variable Screen

Hi All,
I am having one master data Location having Attribute and Text data loaded.
I am using the same Location as a characteristics in my DSO and then in Query .
Now, i have create one variable on Location. When i am executing the query , and click on Location Help. It will show only Text values. I want to have Location Key as along with Text in the variable selection screen.
Please suggest.
Regards,
Macwan James.

Hi James,
for infoobject Location you can swith to both key and Text at variable screen.
please do this setting.
RSA1 -> select DSO change mode -> go to the infoobject Location right click select "Provider-specific properties"
Display " 0 Key and text" select this and activate DSO.
please check at the selection screen.
Best Regards.

Similar Messages

Displaying Medium Text in Variable screen (WAD)

Hello Experts,
When I run one of my reports in BEx, the input help for an infoobject shows key, Short Description and Medium Description. But the same report when I run in WEB it does not show the Medium Description but only the key and Short Description is getting displayed. I have selected short and medium description for that infoobject at all the levels.
Could you please tell me how to show also the Medium Description along with in WEB input help.
Thanks a lot.
Rajat

Arun,
I am using BW 3.0B. The default display is specified in BW BEx Tabstrip in IO Definition (in RSA1) is Medium Text.
My problem is: When I run the report on Web and select the value for characteristic variable of this infoobject (by clicking on the browse link next to text box) , I see Key and Short Text in the list. Whereas my Client requirement is that he wants to see Key and Medium Length Text in the Variable option list.
On BEx Analyzer, i can see Key, Short Text and Medium Text in the Variable slection screen. But it is not giving the same result on Web.
I have checked all the properties in web template.. like data provider, web template, result table properies.. I also tried to change BEx description property to Medium text as well. But it is not working.

How to Display key/text in default selection screen?

HI Gururs,
I want to display key/text in variable default selection screen in BI Analyzer in Quality.
please give me any suggestions to resolve this.
Thanks
vadlamudi

hi,
What i have done is in the cube level, in the dimensions i have made specific properties and set to key/text in development, so its working fine in development of the analyzer, but still its showing text only in quality analyzer.
please give me the solutions if you know any.
regards
vadlamudi

Query Designer&WAD: Variable search help - Display Key/Text button

Good day.
Please, can you write me some solution of my problem.
I have the character with hierarchy.
In tab "Business Explorer" of character set display as "Text".
When i run my query on SAP Portal and enter to search help of character, it is displays text of my ZCHARACTER(not key and text). But name of levels(0HIER_BODE) display key and text... (NODENAME and TEXT).
When i run query in BEx Analyzer, in search help all correct. My ZCHARACTER and 0HIER_NODE displays only text.
When i press tech button "Display Key/Text", a see marked "Text". I cannot find the same button when run search help in Query Designer, WAD(or Portal).
How can i display only texts of 0HIER_NODE? But no [Key] Text.
Thank you for answer.
Regards
Update. Can be usefull:
View table RSDVDPA with key DPNAM='0HIER_NODE' consist field CHAPRSNT with value = '0' (Key and Text).
When i change value of table
UPDATE RSDDPA SET CHAPRSNT = '4'
WHERE DPANM EQ '0HIER_NODE'
AND objvers EQ 'A'.
All works correct!
Change this value directly not correct. I think, that it is change of value of parent character. But when?

I have created own 0HIER_NODE character - ZNODENAME.
Only root node infoobject is 0HIER_NODE. All another - Z.
Thanks! ^)

Hi, unable to display full text on selection screen

hi all
please any one tell me how one can display full text on selection screen because whatevery i have defined in text for selection screen variable is not displaying full text, some letters are missing.
for example :
Poste(s) du document de facturation
above text i want to display on selection screen.
but only Poste(s) du document de factur
is displying. some letters are missing
please try to solve this
thanking in advance

Hi Raj,
Check this..
SELECTION-SCREEN COMMENT fmt name.
Additions
1. ... FOR TABLE dbtab
2. ... FOR FIELD f
3. ... MODIF ID mod
4. ... ID id
Effect
Generates a comment on the selection screen. For the name name , there are two options:
name takes the form TEXT-xxx where xxx is a three-character name for a text symbol. In this case, the contents of the text symbol are displayed at runtime, i.e. the text cannot be changed dynamically. name is another eight-character name. Here, you create a field with the name name in the length specified in the format fmt< /> and it is then generated as an output field on the selection screen. The contents of these comments must therefore be set at runtime (e.g. at INITIALIZATION or - in the case of comments in the database include program DBldbSEL - in the routine INIT of the database program SAPDBldb . They can also be changed when the selection screen is being processed.
Note
The field name is generated automatically and so cannot be defined with DATA .
With comments, you must always specify a format fmt (see variant ULINE ).
Note
You must program a new line yourself via the format fmt .
<b>Example
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 10(20) TEXT-001
FOR FIELD PARM.
SELECTION-SCREEN POSITION POS_LOW.
PARAMETERS PARM LIKE SAPLANE-PLANETYPE.
SELECTION-SCREEN END OF LINE.
This code displays a 20-byte long comment followed by the parameter at the normal position ( POS_LOW ) on the same line. If the user presses F1 for both objects, the documentation of SAPLANE-PLANETYPE is displayed.</b>
Regards,
Raj

Display key in the selection screen and Key & Text in the report

Hi,
For the infoobject in the query,
In the variable selection screen When i want to select any value it should display only key, and in the report i want to display key and text of that infoobject.
Is it possible?
Thanks
Rani

Hi
Display As
Here you determine whether and in what format the individual characteristic values of the characteristic are presented:
·        (Standard): The standard display type for characteristic values corresponds to the setting in InfoObject maintenance under Tab Page: Business Explorer.
·        No Display: The characteristic display is hidden. This function is useful, for example, with the currency/unit characteristic as the currencies are also shown in the key figures.
·        Key and Text: The characteristic values are displayed by their technical key and text.
·        Text: The characteristic values are displayed by their text.
·        Key: The characteristic values are displayed by their technical key.
·        Text and Key: The characteristic values are displayed by their text and technical key.
In the dropdown box below, you can select the type of text you want to use if you set a display type that contains text. The following options are available:
·        Standard: The shortest available text for the characteristic values is used as the text.
·        Short text: The short text for the characteristic values is used as the text.
·        Long text: The long text for the characteristic values is used as the text.
·        Medium text: The medium text for the characteristic values is used as the text.

Display message in BEx variable screen in 7.0

In BEx 3.5 I was able to display a message to the user when they enter a value they are not authorized for in the variable screen. This was done using the function module RRMS_MESSAGE_HANDLING in the variable user exit at step 3 and raising no_replacement.
This is no longer working as of BEx frontend 7.0. Is there a way (or different function module) I can display a message to the users on the variable screen?
Edited by: Troy on Dec 19, 2008 8:56 AM

I am too facing same scenario. What did you do to have variable screen screen displayed ?.

Restricted KeyDate and Text in Variable Screen

Hi Experts,
I have a query displaying a hierarchy. The KeyDate for the Query is used as Date in the hierarchy as well, so I can choose the according hierarchy to the date. Works fine sofar.
Now I want no keydate to be displayed, but a kind of fiscal year, and moreover, only the fiscal years to be selected.
I thought of an customer exit, but this does not work for the hierarchy selection in the variable screen. Modeling an Infoobject of type date does not work as well, as it is only a reference to 0date. Setting default values does not work either.
I now thought of an replace ment part, but I guess, I'll have the same problem, as with the customer exit.
Do you have any ideas how to customize the keydate, so a customer can choose it context wise?
Plan B would be taking the hierarchy into the webtemplate.
thanks in advance,
Dominik

Hi Dominik,
Try using Customer Exit variable with User Input enabled, so that you can populate default value if required and as the variable will be displayed on selection screen you can work on the input value given by user as well.
Regards,
Durgesh.

Key Figures in variable screen, to limit start up key figures

Dear experts,
This is BI 7 and the report / query is in portal.
my query has 40 key figures. 5 is shown and 35 are hidden but can be shown.
The user request that they can use a selection screen to pick up which key figures they want when the reports are executed. 5 keyfigures that I defined are considered "static" and each users has their own "set of key figures".
So I need flexibility to give users option, that they can "preselected" some key figures before they executed the report.
Many thanks and points will be awarded like usual.
Regards,
BWAS.

Hi,
That helps but is there any other way ?
I directly publish my query to portal, then from PCD I assigned to a given role. I don't use WAD ...
Many thanks anyway ...
I still wait for other valuable inputs ...
BWAS

INCLUDE BDCRECX1 not displaying selection text in selection screen.

In my BDC program in using INCLUDE BDCRECX1, When i execute program in selection screen i am not getting selection texts.
what is the problem?

You are not getting selection texts because you have not maintained text symbols in your BDC program,

Display key and text in variable selection screen.

Hi:
I have a variable in the Var.selection screen. and I cannot have the text displaying. Only the key is coming.
- I have checked "Provider-Specific Properties" in RSA1 and is ok. and display attributes in Query Designer as well.
Infio: The Characteristic is used in the same query as a Free Char. and there is displaying Key+Text correctly...
any idea in what else to check.?
Regards.

Hi,
Do you mean that the value help of that variable is not showing the Text values in the selection screen.It shows only the values in "Key"
If this is the case,then invoke the value help of that variable->Click "Settings"->"General Display" tab->Select "Default(Text)" and click OK.The values will be listed in "Text" rather than "Key"
Rgds,
Murali

How do you change the variable screen on Portal to show Key?

Hi All,
I have a report on our Portal. In the variable screen, the users are asked to optionally enter Cost Centre. When they choose to select values (pressing the button on the right) the singles values which are shown are 'Text' only. I know in analyser, the user can switch by selecting the spanner icon - 'Display Key/Text'
How do you change to Key within the variable screen on the portal?
Many Thanks
Michelle

Thank you for your reply Amrita,
The display in the query had been set to Text & Key as follows
Properties of Cost Centre -> Display Tab -> Value Display Section -> Display As 'Text and Key', Text View 'Standard' and Use Characteristic Setting 'Unticked'
Is there another section that I should be amending to ensure the 'Key' also appears in the variable screen?
Many Thanks,
Michelle

How to display LONG TEXT STRING in Module Pool Screen ?

Hi Experts,
I want to display long text string, on screen designed through module pool(SE51). I tried to display through input/output field , but it displays it in SINGLE LINE and i have to scroll all through to view all string.
I want to display it in rectangular format . It doesnt allow me to set HEIGHT of component.
Please provide solution.
Thanks in advance.
Regards
Deepak

This is the program where u can get the WA_THEAD from other program like report and trying to display and modifying that text. U can do instead of WA_THEAD u can generate here itself and use also
*& Module pool       ZMP_LTEXT                                         *
PROGRAM ZMP_LTEXT                               .
TABLES: STXL.
*&      Module STATUS_9000 OUTPUT
MODULE STATUS_9000 OUTPUT.
CONSTANTS:line_length type i value 132.
DATA:g_editor type ref to cl_gui_textedit,
     g_editor_container type ref to cl_gui_custom_container,
     CONT1 type scrfname value 'CONT1',
     g_repid like sy-repid,
     g_ok_code like sy-ucomm,
     g_mytable(132) type c occurs 0,
     g_mycontainer(30) type c ,
     v_result(256) type c,
     g_head like thead,
     it_line type table of tline with header line,
     wa_stxl type stxl.
DATA : BEGIN OF IT_THEAD1,
       ICON TYPE ICON-ID.
       INCLUDE STRUCTURE STXL.
DATA : END OF IT_THEAD1.
DATA : IT_THEAD LIKE TABLE OF IT_THEAD1,
       WA_THEAD LIKE LINE OF IT_THEAD.
IMPORT WA_THEAD FROM MEMORY ID 'ABCD'.
select SINGLE * from STXL into wa_stxl
                 where tdname = '00006000156500000002'.
SELECT SINGLE * from STXL into wa_stxl
                  where tdname = WA_THEAD-TDNAME
                  AND TDID = WA_THEAD-TDID
                  AND TDOBJECT = WA_THEAD-TDOBJECT
                  AND TDSPRAS = WA_THEAD-TDSPRAS.
IF SY-SUBRC NE 0.
MESSAGE 'NO RECORD EXIST' TYPE 'E'.
ENDIF.
MOVE-CORRESPONDING WA_STXL TO G_HEAD.
SET PF-STATUS 'STATUS'.
SET TITLEBAR '001'.
if g_editor is initial.
     CREATE OBJECT G_EDITOR_CONTAINER
       EXPORTING
        PARENT                      =
         CONTAINER_NAME              = CONT1
        STYLE                       =
        LIFETIME                    = lifetime_default
        REPID                       =
        DYNNR                       =
        NO_AUTODEF_PROGID_DYNNR     =
       EXCEPTIONS
        CNTL_ERROR                  = 1
        CNTL_SYSTEM_ERROR           = 2
        CREATE_ERROR                = 3
        LIFETIME_ERROR              = 4
        LIFETIME_DYNPRO_DYNPRO_LINK = 5
         others                      = 6.
     IF SY-SUBRC <> 0.
     MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
     ENDIF.
     CREATE OBJECT G_EDITOR
       EXPORTING
        MAX_NUMBER_CHARS       =
        STYLE                  = 0
   WORDWRAP_MODE          = cl_gui_textedit=>wordwrap_at_fixed_position
for to fix number of characters in row to 132 characers
         WORDWRAP_POSITION      = line_length
         WORDWRAP_TO_LINEBREAK_MODE = cl_gui_textedit=>true
for the word to break to next line if it dont fit in line
        FILEDROP_MODE          = DROPFILE_EVENT_OFF
         PARENT                 = G_EDITOR_CONTAINER
        LIFETIME               =
        NAME                   =
       EXCEPTIONS
        ERROR_CNTL_CREATE      = 1
        ERROR_CNTL_INIT        = 2
        ERROR_CNTL_LINK        = 3
        ERROR_DP_CREATE        = 4
        GUI_TYPE_NOT_SUPPORTED = 5
         others                 = 6 .
     IF SY-SUBRC <> 0.
     MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
     ENDIF.
REFRESH g_mytable.
     MOVE: WA_THEAD-TDNAME TO STXL-TDNAME,
           WA_THEAD-TDID TO STXL-TDID,
           WA_THEAD-TDOBJECT TO STXL-TDOBJECT,
           WA_THEAD-TDSPRAS TO STXL-TDSPRAS.
    CALL FUNCTION 'READ_TEXT'
    EXPORTING
    CLIENT                        = SY-MANDT
      ID                            = wa_stxl-tdid
      LANGUAGE                      = wa_stxl-tdspras
      NAME                          = wa_stxl-tdname
      OBJECT                        = wa_stxl-tdobject
    ARCHIVE_HANDLE                = 0
    LOCAL_CAT                     = ' '
IMPORTING
    HEADER                        =
    TABLES
      LINES                         = it_line
EXCEPTIONS
    ID                            = 1
    LANGUAGE                      = 2
    NAME                          = 3
    NOT_FOUND                     = 4
    OBJECT                        = 5
    REFERENCE_CHECK               = 6
    WRONG_ACCESS_TO_ARCHIVE       = 7
    OTHERS                        = 8
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT IT_LINE INTO V_RESULT.
   APPEND V_RESULT TO G_MYTABLE.
ENDLOOP.
CALL METHOD G_EDITOR->SET_TEXT_AS_R3TABLE
   EXPORTING
     TABLE           = G_MYTABLE
   EXCEPTIONS
     ERROR_DP        = 1
     ERROR_DP_CREATE = 2
     others          = 3.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
   endif.
ENDMODULE.                 " STATUS_9000 OUTPUT
*&      Module USER_COMMAND_9000 INPUT
MODULE USER_COMMAND_9000 INPUT.
CASE SY-UCOMM.
REFRESH G_MYTABLE[].
REFRESH IT_LINE[].
CLEAR V_RESULT.
WHEN 'SAVE'.
     CALL METHOD G_EDITOR->GET_TEXT_AS_R3TABLE
      EXPORTING
        ONLY_WHEN_MODIFIED     = FALSE
        IMPORTING
          TABLE                  = G_MYTABLE
        IS_MODIFIED            =
      EXCEPTIONS
        ERROR_DP               = 1
        ERROR_CNTL_CALL_METHOD = 2
        ERROR_DP_CREATE        = 3
        POTENTIAL_DATA_LOSS    = 4
        others                 = 5
     IF SY-SUBRC <> 0.
     MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
     ENDIF.
LOOP AT G_MYTABLE INTO V_RESULT.
   APPEND V_RESULT TO IT_LINE.
ENDLOOP.
CLEAR V_RESULT.
    CALL FUNCTION 'SAVE_TEXT'
      EXPORTING
        CLIENT                = SY-MANDT
        HEADER                = G_HEAD
        INSERT                = ' '
        SAVEMODE_DIRECT       = 'X'
      OWNER_SPECIFIED       = ' '
      LOCAL_CAT             = ' '
    IMPORTING
      FUNCTION              =
      NEWHEADER             =
      TABLES
        LINES                 = IT_LINE
    EXCEPTIONS
      ID                    = 1
      LANGUAGE              = 2
      NAME                  = 3
      OBJECT                = 4
      OTHERS                = 5
   IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
   ENDIF.
REFRESH G_MYTABLE[].
REFRESH IT_LINE[].
CLEAR V_RESULT.
WHEN 'BACK' OR 'CANCEL' OR 'EXIT'.
LEAVE TO SCREEN '0'.
*CALL SCREEN '0'.
WHEN OTHERS.
ENDCASE.
*G_OK_CODE = SY-UCOMM.
*CLEAR SY-UCOMM.
ENDMODULE.                 " USER_COMMAND_9000 INPUT

Default Org Key Text

Hi Guys,
Is there a way to default the Org Key Text in the screen of Infotype 1. My requirement is to Display the Org Key text when an Org Key is present in infotype 1 screen in PA30. This is like the text in Employee Group and subgroup and Cost Center displayed beside the entry.
Thanks,
Mike

Hi,
Organizational Key is a string with a maximum of 7 bytes, which is placed in the variable key when table T527 is accessed. When maintaining the organizational key in the Organizational assignment infotype, the default values are supplied by field RULID.
Organisational Key can be defaulted by feature VDSK1. So as far as my knowledge is concerned it is NOT possible to give Text for Org Key
Tables for Org Key Maintenance is as follows.
T527     Organizational Key: Control
T527A     Organizational Key Creation Rules
T527O     Organizational Key Validation
Thanks and Regards
Kiran
Edited by: Kiran T Raj on Oct 5, 2010 9:26 AM

How to display the text in a classical report before top-of-page?

Hi all,
I am developing a classical report with top-of-page because i want to display the texts of cloumns even users scroll down the output.
But here the problem is i have to display a text and selection screen values in the ouput ,Before this top-of-page. But i couldn't find the way to do it.
Please help me on solving this problem?
Thanks,
Vamshi.

Hi Vamsi,
whenever there is write statement and you are going to display some thing the system checks for the TOP-OF-PAGE and we are helpless here
so declare your heading in the TOP-OF-PAGE only
THIS is SAP provided way of the SYSTEM bahaviour
Regards
ramchander Rao.k

Display Key & Text In Variable Screen

Similar Messages

Maybe you are looking for