Display language in ipod (30gb)

I have songs in english and in a different language (thai). It shows up in itunes but in the ipod the song names and artist that were in a different language shows up blank. Is there any way to have it display both languages in the ipod?

The iPod does not yet support Thai. See the tech specs:
http://www.apple.com/ipod/specs.html

Similar Messages

Ipod 30gb display divided in two!

Hi, recently the display of my ipod sometimes divides in two where the lower half seems to be a frozen picture of what I saw when this happened. And the upper half is still alive but the picture jumps around. I have to reboot the ipod maybe 2-10 times to make it go back but then it happens again after a couple of minutes.. really annoying. The ipod is about a year old.
Sorry for explaining it kinda bad but anyone else who had the same problem?

Hi, just need to add that the display seems to have changed to a lower color-rate! Maybe 256 colors instead of 16bit or whatever is beeing standard.
I Can also say that when I reboot it half the screens is just a blur and the other half is the normal apple-logo. Please!

Ongoing iPod 30GB Problem

I am currently on my third 30GB iPod with color display. I have had an ongoing problem with them since I got my first one in mid June of last year, after 'X' period of time listening to music (varies from weeks to many months) the iPod will begin to not play songs and just skip to the next song on the playlist until the playlist is done. It will also be unable to turn off.
Restarting the iPod will help for a short period of time before a final restart where the iPod will display a "sad Ipod icon." At this point my computer will not recognize the iPod and it will die completely. I to to continue sending my iPods back to Apple and receiving new ones, however I was wondering what may be causing this problem. Any ideas?
iPod 30GB Photo Windows XP

http://discussions.apple.com/thread.jspa?threadID=352819&tstart=15

IPod 30GB will not work with 3rd party USB 2.0 PCI card

I've had an IOGear PCI USB 2.0 card (GIC220U-BIO) in my Sawtooth for some time now, and have been using it flawlessly with my Canon i860 printer, and Canon LiDE 30 Scanner.
Just recently I received a Video iPod (30GB) and wanted to take advantage the high speed USB bus offered on that card to sync my iPod. The problem is, when I plug in the iPod to the USB port on that card, I get the transparent gray box telling me that I need to restart my mac by pushing the reset switch, or holding the power button for several seconds (in other words, freezes).
The iPod works fine with the built-in USB ports (albeit slow), as well as the high speed port on my iBook G4. Why am I getting this error? There are no drivers or firmware updates for this PCI card available.
Is there a solution?

Yes, use a different USB 2.0 PCI card, like from Sonnet. I use a Sonnet in a G5 and it works great. There are (at least) 2 USB chipsets and I find the TI ones are great and the other not so great.
The fact it works on 1.1 and the 2.0 on the G4 at least tells you it is not the iPod and a USB 2 card is $20 or $30 at the most.

The display on my iPod is extra large and I am have no idea why. I tried the HOME button and the power button at the same time but that doesn't work. I can't even enter my code to unlock it because I cannot scroll the HUGE display! Any ideas??

The display on my iPod Touch is HUGE and I have no idea why. I tried the HOME button and power button at the same time.....no help. I cannot enter my unlock code because I can't scroll without entering a wrong number! HELP!!

Using three fingers, double-tap the screen.
http://support.apple.com/kb/TS3129

Photos won't sync: "Cannot be displayed on your iPod"

Many of my photos will no longer sync from iTunes (Aperture photos) on my Macbook to my iPod Touch. For example, out of 250 photos, only 2 sync.
iTunes says:
"Some of your photos, including the photo "xxxx.jpg", were not copied
to the iPod "Leo's iPod Touch" because they cannot be displayed on your iPod."
These same photos synced fine from iPhoto, but awhile ago I switched to Aperture. I also recently installed Lion.
Any idea what can be done to rectify this? Thanks.

Fixed, by deleting the iPod Photo Cache folders in both the iPhoto and Aperture libraries.
https://support.apple.com/kb/TS1314

IPod 30GB Problems with iTunes 9; Will not sync iPod and freezes iTunes

Since I have updated to iTunes 9 on windows xp (and more recently iTunes 9.0.1) I have not been able to sync my 5th generation iPod 30gb.
What happens when I connect my ipod is that iTunes will instantly freeze and not allow me to do anything on it, but I am able to open other windows just not iTunes. After about 10 minutes iTunes will unfreeze briefly and claim to be syncing my iPod. Eventually after a further 10 minutes I am greeted with a message saying:
"The ipod 'HARRY'S iPOD" cannot be synced. An unknown error occured (-50)."
http://tinypic.com/r/2wchbgy/4
Also when I try to access my iPod through the window's explorer, when I try to enter any files I get the message "Please insert a disc into drive F:" followed by "F:\ Photos is not accesible. The parameter is incorrect"
I have no problems synicng my iPod Nano 4th Generation 16gb.
I've tried to revert to iTunes 8 after uninstalling iTunes 9 but when I do it wont let me open it saying it cannot read the file "Itunes Library.lib"
Does anyone have a clue where the problem is? And better still how to fix it?
Thanks

metalhead684 wrote:
any reason as to why this is happening. I have an Ipod 80 gig fifth generation.
Do NOT Threadjack. Start your own topic please. Help you get in your topic may help others when searching for like topics (your post could be lost in a unrelated topic).
If you don't know how to post a new thread...
In order to see the post link, you need to drill down to the subtopic level of a discussion area. If you see a list of subtopics, you are not down far enough.
For example, from the main discussion menu, you can choose Classic iPod and you will see the following...
Note that in the Classic discussion there are three sub-topics you can choose and NO post link yet. Now pick any sub-topic, for example, pick "Using iPod Classic" and you will get the following...
Now you have a link to post a new topic.
Regards,
Patrick

I can't change the display language on my HP Color LaserJet CP1518ni

I have a HP Color LaserJet CP1518ni printer that I inherited from an employee who is no longer at the company. The display screen on the printer is not showing in English, it's in some language I do not recognize (and neither does anyone else). I want to change the display language to English but the manual only shows you how to do that on the display, which I cannot read because it's not in English, hence my dilemma. Does anyone know of a way to change the display language through the computer?
Thanks

InventoryLady,
Yes that is what I did. I do not know the language that it is currently set at, so the recommendations were from using the front panel menu. The OK button is the OK button on the front panel, that would not be in another language, it is the button in between the left and right arrow- See image below #6:
Once you have hit the OK button, you can complete the steps in my earlier recommendation. Again because I do not know which language it is currently set at, I am guiding you the best I can. As for selecting the English language, I suggest using Google Translate to find out which language it is currently set at and see what their word for English is.
If you have any more questions, please let me know.
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Converting DVD videos to iPod format for iPod 30GB 5th generation?

I would like to convert DVDS to iPod format so I can view them on my new iPod? Can someone help me with a how to list? I have located many PC or windows applications for making the conversion ( free downloads) but what do we use if we are mac users (Mac OS X version 10.3.9)?
Thank you for your help..... Mark
iPod 30GB 5th generation video Mac OS X (10.3.9)

Here, click on the link:
http://handbrake.m0k.org/

How do I copy existing songs from Computer Hard Drive to IPOD 30GB

How do I copy existing songs from Computer Hard Drive to IPOD 30GB? I am slightly learning disabled and have been unable to figure out how to add and or update. Thnaks

If the songs are in iTunes and the iPod is set to sync automatically, the songs should already be on the iPod; if they aren't, follow the instructions in this article and post back with any error messages.
If the iPod is set to sync manually, drag the songs onto the iPod in the iTunes source list.
(21058)

The album artowrk won't display on my iPod.

To put it basically, the album artwork does not display on my iPod any more. It is shown in iTunes, and when I right-click on a song and look at its "info" It shows the artwork.
I have tried deleting all of the songs and re-adding them from their original files, but nothing happens. What can I do?
All songs have been purchased from iTunes.

Well you should be able to do this with the newest iTunes, I have no trouble doing this.
I just copy/paste an image into the artwork box. This doesn't work for you?
Doing this didn't didn't work in iTunes 7, but does in iTunes 7.0.1.

Error -50 when trying to display artwork on ipod 5th gen

I had this problem recently where the artwork went all wierd and wrong album covers were showing, so I thought that I'd remove all artwork using itunes (version 7.0.2.16) update the ipod, remove ipod, reset it, reconnect it and then update again with display artwork checked. It seemed like a good idea at the time but wasn't! Now all the artwork has been removed and when I try to apply 'display artwork on ipod' I get the following error message:
"ipod can't be updated. an unknown error occurred (-50)"
In short, I am now left with no artwork and can't seem to get any of it back onto my ipod despite the fact that it is all correctly atached to the tracks id and dispays ok in itunes.
Any ideas would be gratefully received...

Does anyone have a better solution? I am having this same error, and I really don't want to re-encode anything on my originals. I've done that in the past and I was unhappy with the resulting media in an ABX test. Why does iTunes have to be so picky. One of the songs is in my top 10 favorite that I listen to all the time, and as such I KNOW the song displays no obvious corruptions. AAC is the devil.

Script to automate the display language on windows server

Hi,
I'm looking for a script which should change the windows display language from non-english to english (vizversa).
Here is the scenario:
On windows server 2008 R2 I have two language installed - Japanese and English with the help of MUI packs available on microsoft site. The native language of windows server 2008 R2 is Japanese. Consider there are 10 sys admins only knows
Japanese but not english. Similarly there are 10 sys admins knowing only English. I being english administrator, i should each time go to regional setting in the control panel and click on change display language to english. After
I finish my task I need to set back the language to japanese(native).
I'm looking for script which can auotmate this process.
Objective:
The script should automatical change the language to Japanese when I logoff from the system.
Here is the steps to reach "Change Display language" on windows server 2008
Go to control Panel > Category view (on right side top ) > System and Security > Clock ,Language and Region > Under “Regional Language” > Change display
language > Go to Tab “Keyboards and Languages” > Look for the dropdown menu “Choose a display language” and choose the appropriate language you prefer from the dropdown list
Kindly note this menu/option is available for Vista,Windows 7 and Windows Server 2008. This option is also available on Windows XP/Server 2000/2003 provided the LIP/MUI is installed.
Thanks
Ezakial

Hi,
I'm looking for a script which should change the windows display language from non-english to english (vizversa).
Here is the scenario:
On windows server 2008 R2 I have two language installed - Japanese and English...
Thanks
Ezakial
Guys,
Forgive me, but I think you are making this far too complicated. Using a script to achieve this is, in my view the wrong tool, and a little dangerous. If your logoff script fails to run for any reason, 11 Japanese sysadmins will be waving Samurai swords
at you :-).
There is a single Group Policy setting that will do exactly what you want on Vista, W7, W2K8 & R2.
Create a new Group Policy object ("English_interface", for example.
Edit the new policy object
Drill down to "User Configuration, Policies, Administrative Templates, Control Panel, Regional and Language Options"
Pick the setting "Restricts the UI languages Windows should use for the selected user" and Enable it.
Drop down the "Restrict users to the following language" and pick "English"
Click "OK"
Link your new GPO somewhere in the OU hierarchy that contains the English user
If other (Japanese?) users are also in the same container, you can filter application of the GPO by security group so that the policy can only be read and applied by the English group.
That's all you need to do!
As a point of principle. I ALWAYS install my OS in US English then add languages, and set the locals to use their own language. This is because service packs and hotfixes invariably arrive for US English first, and some hot fixes are NEVER translated.
I'm just doing this for a single W7 build in English, to be deployed in 6 countries, with 7 different languages and 9 different keyboard layouts. Fun...
Come back if you need more help. I volunteer to visit and help if you want!
Richard
MCSE, MCITP, MCT etc.
Switzerland
RS

Server 2012 R2 Display Language?

Hi,
I have a problem to change display language back to default en-US on one of our Windows 2012 R2 servers. It is actually a Domain Controller. During setup the display languages was set to sv-SE.
The server is patched up to date.
When I now try to change to en-US as display language, it says that it is availeble for download, fine. I click download and install, and it installs with no errors.
I go back to language settings, it still says availeble for download.
I have also tried with lpksetup and manually install the lp, but with no success:
And Powershell:
Set-WinUILanguageOverride en-US
Funny thing it says display language en-US:
But as you can see, it is not...
Something I missed here?

Hi affeee,
To provide a full UI, a partially localized language pack includes a base language to localize those parts of the interface that are not localized by a partially localized language
pack.
LIPs are partially localized language packs for emerging or minority language markets where a fully localized version of Windows is not available
Language packs contain the text for the dialog boxes, menu items, and helpfiles that you see in Windows.
For some regions, language interface packs (LIPs) can provide additional translations for the most widely-used dialog boxes, menu items, and helpfile content. LIPs rely on a
parent language pack to provide the remainder of the content. Please refer the following KB to install the language pack and LIP.
Add Language Packs to Windows
https://technet.microsoft.com/en-us/library/hh825699.aspx
Language Packs (lp.cab) and Windows Deployment
https://technet.microsoft.com/en-us/library/hh824829.aspx?f=255&MSPPError=-2147217396
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Removing English IME while keeping Windows Displaying Language as English?

Until Windows 7, Windows Displaying Language (WDL) and IMEs were independent. It was possible to set the WDL to English and use only Japanese IME. From Windows 8, they seem to be combined. If I set WDL to English, I cannot find a way to remove English
IME.
Many foreign IMEs contain "English" mode. For example, the Japanese IME has direct input mode, and the Korean IME has English mode. So, English IME is not necessary, if you are using those IMEs. Having English IME is annoying because it adds another
complexity when you switch the IME using Shift+Alt or Windows + Space.
Is there any hack to remove the English IME while keeping WDL as English?

Hi,
Yes, this is by design on Windows 8.1. Unless you add another input method for this language package, it cannot be removed. It would keep one input method for this language package at least.
So far there is no any other method to remove IME and keep display language.
Karen Hu
TechNet Community Support

Display language in ipod (30gb)

Similar Messages

Maybe you are looking for