Display legend(as image) for ALV

Hello experts,
I have created ALV report in which it displays data in ALV grid. I want to display legend as image which explain output of the ALV grid. ie I want to display image below/under the ALV, which image gives information about outpout. (Legend)
Any suggestions or helpful solutions ideas are appreciated.
Thanks in advance...
Regards,
Viral Patel
Edited by: Viral Patel on Jan 5, 2010 6:24 AM

Hi Sandeep,
Thanks for Your quick response.
Could You please elaborate it how can I implement it in my code as I am new to ALV. There is one button in ALV display called 'Information(Ctrl+F12), when I press it will open browswer and display help on ALV. Is there any way to customize that button and get display legend?
Thanks n Regards,
Viral Patel
Edited by: Viral Patel on Jan 5, 2010 6:42 AM

Similar Messages

  • Displaying a stereoscopic image for shutter glasses displays

    I am very new to flex, I am trying to decide which toolset will be optimal for me.
    Is it possible to create an application using flex that displays a stereoscopic image, which can be viewed using nVidia 3D Vision glasses? If yes, can you give me some starting points?
    My application will receive generated stereo images in real time over the network and should display them. I have complete control over the generation of the images, know how stereo images work, and know to write such an application in C++/DirectX.
    Youtube's flash player recently got 3D Vision stereoscopic movie support, so I assume this should be possible.
    Thanks for any help

    Hey ronfya
    Did you ever get any feedback on this? I haven't read the Technicolor link yet.  I was just trying to figure out why my stuff comes out darker on Vimeo. Could this be because FCPX is displaying it to brightly?
    A.T.

  • Table of content, I want to display just the image for each chapter and the name of the chapter. my book is not landscape format but each time I draging a picture into a specific chapter it duplicate it to all chapters why?

    table of content in a landscape orientation.
    I want to have in my table of content only image and the name of the chapter which is each to do.
    my problem when I am draging an image to each chapter it copied it to all chapter although I am marking only the specifc chapter.
    why? how can i overcome it?

    Are you using Microsoft word?  Microsoft thinks the users are idiots. They put up a lot of pointless messages that annoy & worry users.  I have seen this message from Microsoft word.  It's annoying.
    As BDaqua points out...
    When you copy information via edit > copy,  command + c, edit > cut, or command +x, you place the information on the clipboard. When you paste information, edit > paste or command + v, you copy information from the clipboard to your data file.
    If you edit > cut or command + x and you do not paste the information and you quite Word, you could be loosing information.  Microsoft is very worried about this. When you quite Word, Microsoft checks if there is information on the clipboard & if so, Microsoft puts out this message.
    You should be saving your work more than once a day. I'd save every 5 minutes.  command + s does a save.
    Robert

  • IPhone displays same thumbnail image for all my videos

    Okay so when I check out my videos on my iphone 3GS, regardless of what movie, TV show or music video... it shows the thumbnail of the Batman Dark Knight movie. All the other movies are listed and playcorrectly, but they all show the Batman movie image on the sort screen. I've done a hard reset and erased and put the movies back on the iPhone. This hasn't worked. Has anyone else had this issue? And if so, how did you fix it?

    I had a similar problem, but not exactly the same. I downloaded all my photos and videos taken from my iPhone's camera to my PC, sorted them into folders and then synced them using iTunes. After the sync I checked the photos app and all the folder thumbnails were wrong as were the videos (the pictures were fine). I found a suggestion that a reboot might fix this, I rebooted my phone and after it came back up the folder thumbnails were correct, but all the video thumbnails were still wrong.
    Anyone know how to fix this? Did you figure out how to fix your issue so I could try the fix on this?

  • Changing Displayed Still Images for Podcasts

    I just got iWeb up and running today. Everything is working great, except I can't figure out how to change the default thumbnail images that are assigned when I add new video files to my Podcast page.
    Several of my video files start with a black frame and fade in, which is causing iWeb to display a black image for the Podcast on the Entries page. Is there an easy way to change this image without re-editing my videos?
    I've searched the help menus and the discussion posts here. I was hoping that changing the associated artwork in GarageBand would fix this. I figured out how to add an image and resize it, but when I brought my video file in, the image I had edited added just disappeared and was replaced by a marker symbol.
    I know the quick fix in DVD Studio Pro: open the inspector for the button, uncheck "motion", and set the little timeline to the frame you wish to use. Please help!
    My other idea is to try to configure a links page for the videos myself, so that I can control the image used and just add a hyperlink. Suggestions?

    I had the same problem and looked all over as well. I
    ended up reopening my video clips in Final Cut..
    adding one frame at the start of my still frame and
    then rerendered it out to iweb. it works.. shows up
    in the itunes store as well.
    I can try that, but that ruins the fade in from black effect. I'm hoping there is an easier way. If not, maybe future versions...
    G5 Power Mac   Mac OS X (10.4.4)  

  • Custom image for shipping options

    Hey I was wondering if its possible to display a custom image for each shipping option. So for example if you select regular postage, an image of regular postage would be displayed. If you select express postage, same thing. Is this possible with Business Catalyst?
    One other thing. Is it possible to have free shipping option for 2 or more of a product, but also have express option if they want it?
    Cheers,
    Garuda

    Hi Garuda,
    The image thing would have to be implemented with some JS. You'd listen to the dropdown change and then render the image according to the shipping selection. I unfortunately don't have the code for you that will do this.
    As for the free shipping option, you'd need to use a user defined option of $0 rather than the Free Shipping option and then set your weights so that both options are displayed at the same time when 2 or more items are added.
    Cheers,
    -mario

  • How can we change the  color of the image for product display for different

    Hi All,
    How can we change the  color of the image for product display for different colors, to be displayed on site.
    jeff

    Hi priya,
    The requirement that you have stated is not a standard feature in ISA CRM. In order to do the same, you will need to modify the standard ISA code in Java. A common path for the solution would be as follows:
    1. Colours
        a. Maintain a text type for Color under the object - PCAT_ITM in Customizing.
        b. Modify the standard search of ISA to search within your new text type as well. (In standard it only searches in Description.
       c. Maintain all shirts colour data in the new type created in step a.
       d. Your requirement will be done!
    2. Price
      a. Use list prices for your shop and assign the appropriate condition type, acces in your catalog.
      b. Modify the standard search of ISA to search on the list prices as well.
      c. This too will be done!
    3. Accessories - This is very tricky, and will require some exploration. However, here's my opinion,
    a. Search for the standard function module, which will return the accessories when provided the product as an input.
    b. Modify this function module according to your requirement and ensure that it can be accessed remotely.
    c. Modify the JSP as in steps 1b and 2b above to call this new remote-enabled function module.
    d. Now you're done!!
    The ISA modification part is not so simple, you need a really good guy like "Sateesh Chandra" who'll be able to handle your requirements. This is all I could manage, hope it is some help to you!
    Thanks & Regards,
    Nelson.

  • WD4A : Displaying images in ALV table

    Hi,
    Does anyone know how to display images in ALV tables in Webdynpro?

    Hello,
    You can define an attribute in the context with the type CHAR 30 and define it value like an icon from WDA (like ~Icon/GreenLed). And then you need to create an method to define the attributes of the column that will have the image like follows:
    METHOD display_alv .
      DATA: lr_alv_usage       TYPE REF TO   if_wd_component_usage,
            lr_config          TYPE REF TO   cl_salv_wd_config_table,
            lr_col_header      TYPE REF TO   cl_salv_wd_column_header,
            lr_function_wd     TYPE REF TO   cl_salv_wd_function,
            lr_button          TYPE REF TO   cl_salv_wd_fe_button,
            lr_image           TYPE REF TO   cl_salv_wd_uie_image,
            lr_header          TYPE REF TO   cl_salv_wd_header,
            lr_uie_link        TYPE REF TO   cl_salv_wd_uie_link_to_action,
            lr_if_controller   TYPE REF TO   iwci_salv_wd_table,
            lr_function_set    TYPE REF TO   if_salv_wd_function_settings,
            lr_table_settings  TYPE REF TO   if_salv_wd_table_settings,
            lr_column_settings TYPE REF TO   if_salv_wd_column_settings.
      DATA: lt_columns         TYPE          salv_wd_t_column_ref,
            ls_column          TYPE          salv_wd_s_column_ref,
            lv_text            TYPE          string.
    * Instantiate ALV Component
      lr_alv_usage = wd_this->wd_cpuse_all_alv( ).
      IF lr_alv_usage->has_active_component( ) IS INITIAL.
        lr_alv_usage->create_component( ).
      ENDIF.
    * get reference to model
      lr_if_controller = wd_this->wd_cpifc_all_alv( ).
      lr_config        = lr_if_controller->get_model( ).
    * modify visible rows
      lr_config->if_salv_wd_table_settings~set_visible_row_count( iv_rows ).
      lr_config->if_salv_wd_table_settings~set_selection_mode(
                                           wd_assist->co_alv_selmode ).
    * create function
      lr_function_set ?= lr_config.
      lr_function_wd = lr_function_set->create_function(
                       wd_assist->co_func_det_nfe ).
      CREATE OBJECT lr_button.
    *read text
      lv_text = wd_assist->read_text( iv_key = '002' ).
      lr_button->set_text( lv_text ).
      lv_text = wd_assist->read_text( iv_key = '001' ).
      lr_button->set_tooltip( lv_text ).
      lr_button->set_image_source( wd_assist->co_icon_seldet ).
      lr_function_wd->set_editor( lr_button ).
    * set table header
      lr_table_settings ?= lr_config.
      lr_header = lr_table_settings->get_header( ).
      lv_text = wd_assist->read_text( iv_key = '003' ).
      lr_header->set_text( lv_text ).
      lv_text = wd_assist->read_text( iv_key = '004' ).
      lr_header->set_tooltip( lv_text ).
      lr_header->set_image_source( wd_assist->co_icon_list ).
      lr_column_settings ?= lr_config.
      lt_columns = lr_column_settings->get_columns( ).
      LOOP AT lt_columns INTO ls_column.
        CASE ls_column-id.
          WHEN 'ICON'.
            CREATE OBJECT lr_image.
            lr_image->set_source_fieldname( ls_column-id ).
            lr_image->set_tooltip_fieldname( 'ICON_TOOLTIP' ).
            ls_column-r_column->set_cell_editor( lr_image ).
          WHEN 'ID'.
            CREATE OBJECT lr_uie_link.
            lr_uie_link->set_text_fieldname( ls_column-id ).
            ls_column-r_column->set_cell_editor( lr_uie_link ).
          WHEN 'ICON_TOOLTIP' or 'LOGSYS'.
            ls_column-r_column->set_visible(
                               cl_wd_uielement=>e_visible-none ).
        ENDCASE.
    *set header binding of medium description, otherwise title
        lr_col_header = ls_column-r_column->get_header( ).
        lr_col_header->set_ddic_binding_field(
                            if_salv_wd_c_column_settings=>ddic_bind_medium ).
      ENDLOOP.
    ENDMETHOD.
    Here will be showed an icon (column ICON) and an link (column ID).
    Regards,

  • How to display image for every article in smartforms

    DEAR GURUS ,
    i want to display material
    (mara-matnr) as well as its image for every material in a smartform .how will i code for this and where will i store my image .
    full points will be awarded for the solution . plz send any sample code .
    THANKS ,
    AMIT RANJAN .

    hi,
    upload logos using se78 transaction.
    then create a window in ur smartform and insert that graphic.
    for sample codes check these examples.
    SF_EXAMPLE_01
    SF_EXAMPLE_02.

  • My Mac Pro is not displaying any images for videos or games, it is showing sound and working but nothing else. DVD player is also coming up with an error.

    My Mac Pro is not displaying any images for videos or games, it is showing sound and working but nothing else. DVD player is also coming up with an error. I'm not sure why neither is working, it just suddenly happened. I have done nothing different.

    Lao Bo,
    yes, you can locate and copy a file from your HD to a USB key using UNIX commands. If you know the exact name of the file which you’re trying to locate, try this:
    find / -iname filename -print
    This command will search your entire internal disk for the particular filename. If you know that it’s within a particular user account, then you can save search time with this variation:
    find /Users/username -iname filename -print
    Either variation of this command will print all files found which have the given filename. Presuming that you’re able to identify the correct file, you can copy it to a USB key using the command
    cp -p filename_returned_by_find /Volumes/USB_volume
    If you’re not sure which volume name your USB key has, this command will show you what the possibilities are:
    ls /Volumes
    Please let me know if you have any trouble with these commands.

  • Images for tabs are not getting displayed in the page

    Hi,
    I have given images for tabs on a page. when iam applying images from the local disk, it is showing the images in edit mode. But when I view the page, it is not showing any images.
    Where should i copy the images I use in my pages. I ahev copied all the images in the images directory of portal30 in server.
    Please help.
    Murthy

    Hi,
    Please check the httpd.conf file in your server for /images alias. The /images alias will point to a directory. Copy your
    image files in that directory.
    Thanks,
    Sharmila

  • Disk Utility: after creating the .DMG (compressed image) When "scan image for restore" finishes it displays "unable to scan (internal error)". Since the process was scanning for about 1 hr is this a fake warning?

    External 500GB drive is partitioned with 400GB for Mac OS extended (journalling) and 2nd partition formatted today as "ExFAT".
    Yesterday I tried to create a disk image of my HD to no avail - this was compressed on a FAT partition. I got a warning after running the <scan image for restore> saying "unable to scan (internal error)"
    I rang Apple support who suggested formatting a partition as MAC OS extended (journalling) and choose to save the image as "read/write'. The image process stopped writing at about 200GB and then the file size jumped to 499GB (ie the size of the HD). But the process did nothing for about an hour so I foce quit disk utility (as suggested by apple support)
    My current attempt was to format the external drive again; this time with a 400GB Mac OS extended (journal) format; plus a 100GB ExFAT format partition. The new image was created after about 2.5hrs with a compressed size of 149GB. However, after running the "scan image for restore" facility I got the warning message "unable to scan filename " (internal error). The process was scanning the image file according to the progress bar - this took about hour - thus the warning is a puzzle.
    If anyone can say more about this error I would really appreciate knowing tips for using disk utility. The screen grab is below.
    "unable to scan filename " (internal error)
    thanks

    Thanks for a quick reply <baltwo>. You’ve answered that it is not a fake message!
    fyi: I thought that I would use my external Buffalo for two purposes; namely the smaller ExFAT partition for copying stuff to my win7 netbook. The larger partition was to be used as my imac image of SL. So this was my first attempt at using disk utility - the idea being to hold an image backup at another location. Plus I now have the Lion thumbdrive ready to upgrade from SL and so being cautious wanted to have a SL image backup
    Anyway I followed the apple instructions using my mac 10.6.3 install DVD but it would appear from other discussions that <unable to scan (internal error)> is not unique to me.
    I’ll get back to apple telephone support for further advice.
    I would though be grateful for an “idiots’ guide to making an image backup of my internal HD that runs SL 10.6.8
    eg should I have just one partition on the external USB drive? format it as Mac OS extended? create the image as compressed or read/write? Basically I’ll do whatever will work!!
    thanks again

  • Components for displaying thumbnails of images

    Anyone know of good components that are available that allow you to display thumbnails of images?
    How about components that allow you to convert file types?
    Thanks,
    Eric

    If you only need the basic image types (GIF, JPEG), load it into an ImageIcon, scale it down, and plop it into a JLabel:Image  image     = new ImageIcon(filename).getImage();
    Icon   thumbnail = new ImageIcon(image.getScaledInstance(w, h, hints));
    JLabel thumbview = new JLabel(thumbnail);

  • DIfference between Reusable FM for ALV display and ALV display using class

    Hi,
    Is there any difference between alv display using Resuable FM and ALV display using classes except the later one uses OO concept.??
    One mere thing i want to clarify is that is there any difference exist between REUSE_ALV_GRID_DISPLAY and REUSE_ALV_LIST_DISPLAY? If so, then let me know.
    It could be easier to understand me if yuo give scenario where these FM comes into picture
    Regards,
    Parag

    Hi,
    (1) REUSE_ALV_LIST_DISPLAY
    Display an ALV list as per parameters defined in the function call
    (2) REUSE_ALV_GRID_DISPLAY
    Display an ALV grid as per parameters defined in the function call
    (3) REUSE_ALV_COMMENTARY_WRITE
    List header information is output according to its type. The output information is put in an internal table. Output attributes are assigned to each line via the TYP field.This module outputs formatted simple header information at TOP-OF-PAGE.
    (4) REUSE_ALV_HIERSEQ_LIST_DISPLAY
    This module outputs two internal tables as a formated hierarchical-sequential list.
    (5) REUSE_ALV_VARIANT_F4
    Display variant selection dialog box.
    (6) REUSE_ALV_VARIANT_EXISTENCE
    Checks whether a display variant exists.
    Other Useful Link :
    Customize ALV grid layout at run time
    Download ALV grid Control Tutorial
    Understand ALV report ( Just Copy and paste )
    Dynamic selection on ALV at run time
    Dynamic selection on ALV at run time
    Regards
    Kiran

  • How to display different icon within WDA alv table base on row data ?

    Hi,
    is that possible to display different icon for every row within ALV table depending on the row data ?
    for instance if the status 'S' display ~Icon/SuccessMessage and 'E' display ~Icon/ErrorMessage ?
    because base on this code below i only can set 1 icon for the whole row data.
    LOOP AT lt_columns ASSIGNING <fs_column>.
        CASE <fs_column>-id.
          WHEN 'ICO'.
            CREATE OBJECT lr_caption.
               lr_caption->set_image_source( value = '~Icon/SuccessMessage').
               <fs_column>-r_column->set_cell_editor( lr_caption ).
        ENDCASE.
      ENDLOOP.
    Thank you in advance.
    Fernand

    Hello,
    Yes it is possible to display different images based on data.
    For that what you can do is create one attribute 'STATUS' of type string in context node which you are mapping to ALV.
    And fill that attribute with the path to image based on your requirement like for status 'S' set the attribute to ~Icon/SuccessMessage and if status is 'E', set it to ~Icon/ErrorMessage at runtime.
    Now in the settings for ALV use the following code:
    * Display icon in column seatsocc
      DATA: lr_column TYPE REF TO cl_salv_wd_column,
            lr_image TYPE REF TO cl_salv_wd_uie_image,
            lv_icon TYPE string.
      lr_column = lv_model->if_salv_wd_column_settings~get_column( 'SEATSOCC' ).
      CREATE OBJECT lr_image.
      lr_image->SET_SOURCE_FIELDNAME( 'STATUS' ).
      lr_column->set_cell_editor( lr_image ).
    in the above code, column 'SEATSOCC' will be displayed as an icon.
    Sample code to fill the attribute 'STATUS'
    LOOP AT lt_flights INTO ls_flight.
        lv_seatsfree = ls_flight-seatsmax - ls_flight-seatsocc.
        IF lv_seatsfree = 0.
          ls_flight-status = 'ICON_RED_LIGHT'.
        ELSEIF lv_seatsfree <= 50.
          ls_flight-status = 'ICON_YELLOW_LIGHT'.
        ELSE.
          ls_flight-status = 'ICON_GREEN_LIGHT'.
        ENDIF.
        MODIFY lt_flights FROM ls_flight.
      ENDLOOP.
    Hope this helps!
    Regards,
    Srilatha
    Edited by: Srilatha M on Jun 25, 2010 12:02 PM

Maybe you are looking for