Display light going off early 6070

How do I extend the time of display illumination on my 6070, it goes off too quickly. Changing power off or time out doesn't seem to make any difference, can anyone help please?
Thanks and regards

I figured it out. I think it had to do with my old case. I was using a case for my old iPhone 3G until I got a new case for my 4S.  When I took off the case, it worked as expected - when I moved the phone from my ear and looked at it, the light went on so I could see the display.
Be interesedt to understand (if anyone knows) how the case may have affected it working differently - going dark when moving away from my ear to see the phone.
Thanks.
Shawn

Similar Messages

  • Apple TV status light goes off by itself,power cord is on but I'm not watching ATV programes ,I'm just watching tv show on my HD TV.can anyone help?

    Apple TV status light goes off while I was watching tv show on my HD TV not Apple TV .the Apple TV power cord is on,I need to switch the power on and off then the status light goes on  again on Apple TV is this normal?

    i need to turn the power on and off and then the status light come back but if im watching movie or airplay it working fine.if im not watching anything on apple tv but some show on my tv then it happen.

  • Need Help - Light goes off on screen!!

    Have Satelitte Pro A200 and as i am working its like as if the light goes off in the screen, it may switch back on, but usually I have to close the screen down and leave to laptop go into hibernation and then open up again.  this is very frustrating please Help!!!!

    Thank you for using the Toshiba Laptop Forums. Since there have been no posts to this thread in several days, it is being marked "read only" as part of our routine message board maintenance.
    If you still need assistance, please feel free to post a new message or contact the Toshiba Customer Support Center at 1-800-457-7777.
    Trina W
    Moderator

  • TS3048 Even after installing new batteries and switching it on my magic mouse does not work. Sometimes it works but switches off (indicator light goes off) on its own after a few minutes.

    Even after installing new batteries and switching it on my magic mouse does not work. Sometimes it works but switches off (indicator light goes off) on its own after a few minutes.

    Try resetting the PRAM and SMC.  Try making the device a favorite .
    Barry

  • Light goes off or System crash During Upload data through BDC Call Transaction ..

    Hi Experts ,
                    How do I know how many records had been updated in database while uploading the  flat file through BDC call transaction  ,the system suddenly  crash or light  goes off ..............
    Thanks and Regards .
    Om prakash 

    Hi Prakash,
    i have already told toy to use bapi to get all the error and success messages, through which you don't need to do all the above stuffs, the first method you have shown is based on algorithm , which might not be correct each time, and the second method is handy.
    You can add these code lines in your BDC which will give you all error and success messages
    DATA : BEGIN OF options.
             INCLUDE STRUCTURE ctu_params.
    DATA : END OF options.
    DATA: i_messtab LIKE bdcmsgcoll OCCURS 0 WITH HEADER LINE,
           l_message LIKE bapiret2-message.
    DATA: p_mode TYPE c.
    DATA  BEGIN OF it_error OCCURS 1.
    DATA : text(100)  TYPE c.
    DATA  END   OF it_error.
    DATA  BEGIN OF it_success OCCURS 1.
    DATA:  text(100) TYPE c.
    DATA  END   OF it_success.
    START-OF-SELECTION.
      PERFORM upload_data.
    *   Report for success
       PERFORM  success_text.
    *   Report for Error
       PERFORM  error_text.
    END-OF-SELECTION.
    CALL TRANSACTION 'your transaction code' USING bdcdata
                                 OPTIONS FROM options
                                 MESSAGES INTO i_messtab.
         IF SY-SUBRC NE 0.
           CALL FUNCTION 'BAPI_MESSAGE_GETDETAIL'
             EXPORTING
               id         = sy-msgid
               number     = sy-msgno
               language   = sy-langu
               textformat = 'ASC'
               message_v1 = sy-msgv1
               message_v2 = sy-msgv2
               message_v3 = sy-msgv3
               message_v4 = sy-msgv4
             IMPORTING
               message    = l_message.
           CONCATENATE l_message '-' wa_input-newko wa_input-wrbtr wa_input-budat INTO it_error-text
           SEPARATED BY ' '.
           APPEND it_error.
         ELSE.
           CONCATENATE 'DATA UPLOADED SUCCESSFULLY :' wa_input-newko  wa_input-wrbtr wa_input-budat
           INTO it_success-text SEPARATED BY ' '.
           APPEND it_success.
         ENDIF.
         REFRESH bdcdata.
         CLEAR: wa_input,l_message.
    ENDLOOP.
    ***ENDLOOP.
    endform.
                        " UPLOAD_DATA
    FORM success_text .
       LOOP AT it_success.
         AT FIRST.
           WRITE :/10  'Following records successfully uploaded'.
           ULINE.
         ENDAT.
         WRITE :/10  it_success-text.
       ENDLOOP.
    ENDFORM.
    FORM error_text .
       LOOP AT it_error.
         AT FIRST.
           WRITE :/10  'Following records  are not uploaded'.
           ULINE.
         ENDAT.
         WRITE :/10  it_error-text.
       ENDLOOP.
    ENDFORM.

  • IPod switches off when the light goes off.

    When I play music in the car on my Nano, I switch it on, using shuffle. After 40 seconds or so the light of the Nano goes off and the music switches off. I restart it sometimes 8 or 9 times. Suddenly it continues to play, also for a 3 hour drive and doesn't switch off again.
    I can find no explanation for this. Any ideas?

    Hi Jackie 1,
    Since I'm not sure which iPod nano you have, you might want to start here:
    iPod troubleshooting basics and service FAQ
    http://support.apple.com/kb/ts1382
    which has a link to more specific help at:
    iPod Support
    http://www.apple.com/support/ipod/
    Selecting the iPod nano (7th generation) for example, then the troubleshooting section shows this article:
    iPod nano (6th generation): Music stops when display turns off
    http://support.apple.com/kb/TS3700
    Verify that you have firmly connected the headphones to the headphone jack on your iPod nano.  The cable should be flush against the iPod with no visible gap.
    Hope that works for you,
    Nubz

  • Mac mini (late 2014) display Flicking/goes Off and On

    Hi everyone!
    Well.. i can say that, this is my first Mac computer and i already have problems. I have read a lots of comments and i have seen that many people experienced this problem with Mac mini, like display corruption, not property colors, flicking, display goes off and back on... or just standing on sleep and not turning on. (like Mac mini 2012 or 2011.. i have read about same issue..) so whats really happen?
    So, from the peoples comments i tried possible solutions:
    SMC Reset
    I have Reinstalled the OS X Yosemite (complete HDD format)
    I have changed the cable
    (Nothing works)
    Some detail about my connection:
    I have Mac mini (late 2014) i5 2,6GHz dual-core, 8GB ram, Iris Graphics (Intel), 1TB HDD
    I have connect it via miniDP to DP > to > Dell UltraSharp U2713HM
    My following issue:
    -Screen goes Off and On without reason (mostly happens when i connect my iPhone i have noticed, or maybe just impression..)
    -Screen goes to Sleep without reason while i'm on computer (this normally happens after a few off and on screen flickers)
    -Image corruption/distortion (after this display goes off and on, or just remaining on sleep.. like not detected
    I hope someone can help me with this problem, i just bought it one week ago and i don't know what should i do, because as well i have read that even i'll change it, it can have the same problem.
    Waiting or a response,
    Best regards.

    Update: I'm coming back with a possible tip for fixing this issue (I hope Apple Stuff will notice this.)
    So, how i said in the previews message.. the Image corruption / and going Off and On the display happens mostly when i'm connecting the iPhone. Theory tested a few times, and take a guess.. it's true.
    When i'm connecting the iPhone, the monitor goes crazy.. for some seconds, turning off and on.. and sometimes Image corruption, then coming back like nothing happened. Because i found out this, i was making more tests with the iPhone.
    First, erasing the disk and reinstall the OS X again. Everything worked perfectly, until i was connecting the iPhone. I got directly Image corruption and Screen goes Off and On a several times. After this is happening, and you'll unplug the iPhone and put it again, you may not receive again Image corruption or Screen to go Off and On, but after a restart when you'll connect it again, you will receive almost everytime.
    So.. after this, i was testing further. I have Paired my iPhone with iMessage and FaceTime, to see if can be a possible issue there also. True again!
    Receiving messages from iPhone to Mac / Sometimes display goes Off and On
    Receiving a Call via FaceTime to Mac (from your iPhone carrier) / Image corruption / Screen Off and On
    After a day of test, i have realise where is the problem. "iPhone connection/Mac"
    So, the cable it's good (connection miniDP to DP), by Surfing and by running other Apps i have no problem (at least until now), the only problem what cause the Image corruption and Screen Off/On for several times, it is only because of the connection with the iPhone.
    I hope is someone there from Apple Stuff that will take this as notice to solve this problem. Because it is 99% software problem, and i hope it will appear soon enough an Update/Fix.
    Thank you!

  • LED Light Going Off Every Few Minutes

    My LED notificiation light is going off every few minutes.  I have no new emails, I have no new texts, no new notifications.  i have turned off my phone, I have taken out the battery and put it back in.  I have changed my notification settings.  I don't know what to do next.  Help please!  I have a Blackberry Pearl Flip Phone.

    Hi,
    Check and see if you have a program that has an update in Blackberry App World.  That might be it.  Also, check and see, your device might have a software update under wireless update.  It could be one of those two places.
    Doc

  • Westell 6100 internet light goes off about 2-5 time an hour

    Hello,
    I have a westell model 6100 modem and for about a week the internet light has been going off aobut 3 times an hour, it doesnt go red, it just goes black with no light.  i was wondering if there was a way to fix it.

    try replacing the dsl modem. i had the same symptoms. it took verizon one month to tell me the dsl modem is bad.

  • Power management: display never goes off when it should

    I have two Satellite and on both of them, the display screen never goes off after the scheduled time. They did before. Any help here?

    Hello
    I have noticed same thing on my Satellite M70 but not always. Every power saver profile has own settings and if you set something under Full power profile it will not work under Long life profile. Because of that be sure you have right settings for power saver profile you use.
    Other way I have noticed that sometimes it depends on some running process or open application. It works always well but yesterday I have open one internet page with running radio station. In this case the display was permanent on. I can not understand why.

  • HP Pavillion starts, then the pushbutton light goes off and on again before it starts

    When I attempt to start this Pavillion Elite HPE, the startup button light turns on, then goes off and back on several times before the computer finally starts. Occasionally, the screen remains blank.  So far, I can eventually get the computer to start up, but I wonder if this is a sign of a failing power supply. 

    Reset the SMC > Intel-based Macs: Resetting the System Management Controller (SMC)
    1. Shut down the computer.
    2. Unplug the computer's power cord.
    3. Wait fifteen seconds.
    4. Attach the computer's power cord.
    5. Wait five seconds, then press the power button to turn on the computer.
    Followed by resetting the PRAM > Resetting your Mac's PRAM and NVRAM
    1. Shut down the computer.
    2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    3. Turn on the computer.
    4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    6. Release the keys.
    Then if those do not fix the problem, you may need to reset your Energy Saver and Keyboard Preferences by readjusting them.

  • HT1651 after turning on my macbook the power light goes off but the apple sign on the screen continues on for a while and then the screen goes blank and the computer starts and stops repeatly

    power light goes on the immediately goes off, screen show apple  then goes black without turning onn

    You can try disabling emoticons and image previews in your IM appearance settings in your Skype options to see if that changes anything.  Some people running Windows XP have had odd graphical and resource issues with versions of Skype above 7.5.  The alternative solution would be to downgrade to Skype 7.5 for the time being.  You can find links to 7.5 in the thread below. http://community.skype.com/t5/Windows-desktop-client/Skype-7-6-crashes-on-startup/m-p/4031560/highlight/true#M353247 

  • HT3964 My macbook light goes off by itself...

    Hello everybody!
    Lately my macbook (white) version 10.5.8 goes black by itself. The computer is still on. There is still a faint image but its too dark to see. I can get it back if i recude the light all the way down (F1) and then increase it all the way up (F2) but its the same again. It lastes for few minutes. I have already tried the resetting. (Switching off, removing battery pressing power button and putting the battery back and switching on) but its still the same.
    Also my macbook has become slower than before, or gets stuck sometimes.
    Please help!!!

    Have you tried resetting the System Management Controller? That is a good first step for power related issues such as this.
    Best of luck.

  • What happens when the light goes off on an express airport router?

    I was on the internet using a wireless connection with an express airport and suddenly I heard a sound and the light on the router went competelly off.  I would like to know what happened.  I unplugged the airport and plugged in again on another outlet but nothing happens.  The airport has about 3 or 3.5 years.

    It's not possible to know exactly what happened within the AirPort Express unless you carefully saw the case open along the seams to examine the internal components.
    It's likely that something in the power supply section has failed since the device will not power up. Repairs...if possible.....would likely cost more than the cost of a replacment Express, but if you are handy with small electronics repairs, you could poke around a bit to take a look for something obvious.

  • TS1574 you should mention that the audio output jack is fleaky, try plugging and unplugging until red light goes off !!!

    It should be mentionned in the Apple help that the audio output jack is sometimes fleaky, as it does not reclose the speakers contacts correctly when an earphone jack is removed. This can be checked by looking into the computer audio jack and seeing a red light, which confirms the optic output is active. Plugging and unplugging the jack until the red light disapears is the cure, unless you are unfortunate enough to have a broken audio jack. Good luck !

    Same here. I don't remember doing anything out of the ordinary. I was working in Parallels on getting a AM station to stream via some web interface. Next time I went to play sound on the internal speakers, no go.
    I've tried zapping the PRAM, toggling the headphone jack and the toothpick thing. Nothing seems to work.
    I've also noticed that I get sound in my headphones in iTunes but not in Garageband (someone had suggested that starting up Garageband would reset things.
    Any other ideas out there?
    Is there a file that could get corrupted that I could switch out of my back up?

Maybe you are looking for