Display Line Items - Define Line Layouts?

I cannot understand what  Define Line Layouts means in SPRO.
Financial Accounting -> General Ledger Accounting -> Line Items -> Display Line Items -> Define Line Layouts
I can see that there is some Line Layout Variant (D0,D1D2...), with some Fields, but i cannot understand where this fields or Line Layout Variants are used, in what transactions i can see changes if a made some. This variant reflects line layouts when i post something (f-02, ,f-03, f-04, f-51...) or when i want to see account items or balances ???.

Hi,
You can use these line layouts in the display of line items in various transactions and you can default a particular line layout for a user master, so that by default the line items comes in that layout for that user.
Go to FB00 > Doc Display tab and there you can assign the line layout
And then when you see the doucment say in FB03, you will see the line items in that format.
Regards,
SDNer

Similar Messages

  • GL account with line items in line type 'S' document split?

    Hi Experts,
    We found in PCP0 there are payroll documents which has GL account with with line items in line type 'S' document split. Unlike other line items with line type 'blank' these line items cannot be opened and display the wage type details. How can we know from which wage type these line items were created?
    Regards,
    Allan

    These line items are caused by company transfer and they are cleared by themselves between companies.

  • Asset field blank in FS10N (Drilldown to line item level) report layout

    Hi all,
    i ahve posted a Retirement transaction to an asset and when i went to see the line item on the GL using/executing report FS10N for asset transactions GL and drill down to the line item level by double clicking on the period balances and I choose field "Asset" to be displayed in the layout, it is blank. How can I get report FS10N to display the asset number from the transaction?
    the field is available in the layout but when i pull it into the report it is Blank in the report.
    Any help would be appreciated. Thanks
    Jay

    Hello,
    FS10N shows only balance, FBL3N shows the line details.
    Add the asset as a special field via OBVU  (Table:  BSEG, Field: ANLN1).
    Regards
    Waza

  • Total of line items in line item file not the same as in statement file

    Hi,
    Can anyone give an idea about this error?
    I analysed teh multicash file for the totals and line items total ties out with the statement total and formats of the file also seem to be fine.
    not sure why the error persists?
    Raj/

    You should give the exact message, with message number.
    If it is FB 777, "DTAUS: Number of line items not equal to control total; see long text", you should see the long text. I think it contains sufficient information:
    Text                                                                               
    DTAUS: Number of line items not equal to control total; see long text
    Diagnosis                                                                               
    data records of record type 'C' were handed over in the file you    
        imported. There must be  data records according to the control total 
        from the fourth field of record type 'E'.                                                                               
    Processing was therefore terminated.                                                                               
    The DTAUS file was not imported into the bank data clipboard. No     
        postings were generated.                                                                               
    Procedure                                                                               
    Inform your credit institution about the error which has occurred and
        let them give you a correct DTAUS file.                                                                               
    No actions are necessary in the SAP System.

  • Line items separed line(Uline) in SAP Script

    Dear Friends.
    I want to print a separated line (Uline) in-between each line item and the line should not come when it is last line item of the page.
    I am going to print in first page with 7 records and next all pages with 17 records.
    here I have written it for first page which is working but how to do with rest of the pages???
    Here I have taken a flag when the line item reach to 7th record, and i am using it in my form window as bellow:
    /: IF $GV_FLAG& = 'X' AND &PAGE& = '1'
    /: ELSE
    UN &sy-uline(151)&
    /: ENDIF
    The same i want  for rest of the pages.....but the remaining pages will have 17 records per a page..
    Could you pls suggest me on this...
    Thanks,
    Sridhar.

    Hi Sridhar,
    I am assuming that $GV_FLAG& is for 7 records, so take another falg like this for second page $GV_FLAG2& and count it for 17 records.
    [code]/: IF $GV_FLAG& = 'X' AND &PAGE& = '1'
    /: ELSE
    UN &sy-uline(151)&
    /: ENDIF
    /: IF $GV_FLAG2& = 'X' AND &PAGE& <> '1'
    /: ELSE
    UN &sy-uline(151)&
    /: ENDIF[/code]
    Regards
    Sudheer

  • Displaying file items in-line

    I want to be able to display a HTML file that I have loaded into my content area in-line. You can do this with text items, but are limited to 32K.
    Are there any plans to enable this for file item types.
    Or has anybody done this before.
    URL items are not an option I have 11000 documents.
    null

    Am not sure if you will want to do this considering you have so many files ... it is a cumbersome wayout but you can try this
    1. Upload the file and then hide the item you just added.
    2. Now define a link in your folder pointing to the hidden file - you can display the file in your content area.
    You can keep a folder that will contain the hidden files.
    Rama Krishnan

  • Extracting Line Item and Line Item Status

    We are on version 3.5 of BW.
    I have a requirement to associate each row in the change log of the ODS - Sales Order: Item Status to a row in the change log of the ODS - Sales Order Item Data.
    For example:
    When there is a status change recorded in a "before" and "after" image rows in the Item Status change log, how do I associate that to the "before" and "after" image rows in the Sales Order Item Data.  Likewise of there is a "N"ew record in the Item Status, how can I associate that row to the "N"ew row in the change log for the Sales Order Item Data.
    Is this even possible?

    Thanks for your reply.  However can you be a bit more explicit using the terms:
    Sales Item Change Log
    Sales Item Active Data
    Sales Item STATUS Change Log
    Sales Item STATUS Active Data
    Any other table you may be using.
    In what table(s) are these counters and how do they cross reference each other?  How are you incrementing a counter in the Sales Item ODS and cross referencing it to a counter in the Sales Item STATUS ODS?   Remember what I want to do is reference a row in the STATUS ODS to a row in the Sales Item ODS.
    Again, thanks!

  • Define Additional Fields for Line Item Display

    Dear gurus,
    I'd like to ask for your help again, please. I've just added the field BKPF-USNAM to the list of fields of FBL1N using IMG:" Financial Accounting-> Accounts Receivable and Accounts Payable->Vendor Accounts->Line Items-> Display Line Items->Define Additional Fields for Line Item Display". When I run the report the field is correctly displayed but if I save the current layout and set it into the selection screen, the column appears is blank. And if I open the change layout window and click OK the column gets filled.
    Is there another transaction that I must set new columns to FBL1N.
    Thank you very much.
    Paresh Jivani
    Edited by: Jivani Paresh on Jul 31, 2009 9:16 AM

    Hii,
    When you will execute FBL1N, it will come up in standard format. if you want to see any specific fields,then you have to go to Change Layout button and choose from available fields as per your requirement and then execute.
    For future reference, you can save this layout as a Variant and then you can directly execute that report using that variant.
    Dhara D.

  • I want to display footer in the second page of a layout if line items excee

    Hi to all,
    I am displaying line items in a layout(Scripts) of a 1st page if contents are enough to display in box,footer has to come in 1st page else the footer is  to be displayed in second page.
    Waiting for your precious replys.

    hi,
    give the content between
    /:protect
      give what to be displayed
    /:endprotect
    content between protect and endprotect will display the content in the current page if space is available or it will print the  hole content in the next page..
    Hope this will be useful..
    regards,
    karthik

  • Additional fields for line item display for Vendor Accounts

    Hi,
    The additional fields for line item display have been defined for the vendor accounts. I am able to see the additional fields in SAP 4.7 system but not in ECC 6.0.
    Could you help me to know how the same will be displayed in ECC 6.0 system.
    Thanks

    In SPRO, Vendor Accounts -> Line Items -> Display Line Items -> Define Additional fields for Line item display, the fields for Check number from (PAYR-CHECF) and Tax Jurisdiction (BSEG-TXJCD) have been defined.
    When I am executing Vendor Line Item display (FBL1N), I am not able to select these fields for defining a layout. Could you please let me know, how I will get these fields in FBL1N.
    Thanks

  • Functional Area in Line Item Display FBL3N

    Dear Expert,
    My system is running on ECC6.0 and functional area is activated.
    I would like to see the Functional Area in Line Item Display (FBL3N) but couldn't get it in any field selection (change layout).
    I have added the field in the GL Accounts> Line Items> Define Special Field for line item display as BSEG - FKBER_LONG
    But I still couldn't get the functional area for each line item in the Line Item Display.
    Please advise. Many thanks.

    Dear Please Configure Through Below Path, You will get Line item wise Functional Area:-
    Financial Accounting (New)>Accounts Receivable and Accounts Payable>>Vendor Accounts>> Line Items >>Display Line Items> Define Special Field for line item display as BSEG - FKBER
    Regards,
    Viswa

  • Cheque Number in Vendor and GL Line iTem Display

    Hi
    How can we get to display the Cheque Number in T Codes FBL1N and FBL5N
    Samir

    Hi
    Please follow the paths
    GL Accounts:
    IMG ==> General Leder Accounting ==> Master Data ==> GL Accounts ==> Line Items ==> Define Special Fields for Line Item Disply
    Enter Table PAYR
    Field Name CHECF
    Vendor Accounts
    IMG ==> Accounts Receivable and Accounts Payable ==> Vendor Accounts ==> Line Items ==> Display Line items ==> Define Additional Fields for Line Item Display
    Enter Table PAYR
    Field Name CHECF
    After adding this, when you run FBL1N and FBL3N you can see the cheque number against payment documents.
    Thanks & Best Regards
    Sanil K Bhandari

  • Display Field "Purchasing Doc No" & "Vendor" in GL Line item of FAGL003 rep

    Dear Experts,
    To display of Purchasing Doc No (EBELN) & Vendor(LIFNR) in GL line item of FAGLL03 report we have added both the field in the customization setting of Special Fields in GL Line Item using the following path:-
      Financial Accounting(New)
         General Ledger Accounting(New)
            Master Data 
               G/L Accounts
                  Line Items
                    Define Special Fields for Line Item Display
    After the request got transported to quality client the fields Purchasing Doc No (EBELN) & Vendor(LIFNR) disappears from the lay out list of FAGLL03 report.
    All the screen shots are furnished in the attached file.
    Please advise.
    Regards,
    Alok Parida
    FI Core Team

    Hi Seetaramaiah,
    Please regenerate structure according to following steps.
    Call transaction SE37, enter the function module ITEM_STRUC_EXTENSION and
    execute it with the following parameters:
    BASIC_STRUCNAME: FAGLPOSY
    EXT_STRUCNAME: FAGLPOSYEXT
    EXT_FIELDS_TABNAME: T021S
    I_LSTCL: D
    X_TRANSPORT: ' '
    Regards,
    Joseph

  • Config line item layouts for Clear transaction

    hi all,
    can anyone tell me how I can config these codes
    Current line item layouts for Clear transaction F-32, menu Settings/ line layout:
    A1     Allocation / document number
    K1     Document number
    K2     Reference no.
    K3     Account number
    K4     Account number / company code
    K5     Company code
    K6     Payment order
    K7     Bill of exchange payment request
    SA     Order
    SB     Purchasing document
    SP     Project
    T1     Original document number
    Z01     Account / Allocation
    Z02     A/P - Open invoices
    Z03     WBS Element
    Z04     Network
    ZK2     Ref. / Alloc. / Document / Reason C
    thanks alot!
    Tram Nguyen

    Hi,
    In IMG (transaction SPRO) under
    Financial Accounting -> Accounts Receivable and Accounts Payable -> Business Transactions -> Incoming Payments -> Manual Incoming Payments -> Make Settings for Processing Open Items -> Define Line Layout
    Here you determine which information is to be made available on the screen when processing line items (for example, document type, document number, account number, company code).
    Regards,
    Srilatha.

  • How to: Reference fields XREF1/2 to be displayed in Acc Doc Line Item

    Hi Experts,
    May I know how to display the fields in the Line Item Level that can also be changed.
    What I already did was the configuration OB32, OB41, FI>GL>Master Data>G/L Accts>Line Items>Define Special Fields for Line Item Dsiplay.
    But it still not working. What is the proper way to configure these fields?
    Thanks

    In the Line item Display list in FBL*N follow this menu path: Settings
    -> Special fields, and add the fields you want from relevant table.
    The fields are later available for display, and you can choose them from
    the Line item Display list following this menu: Settings -> Display
    variant -> Current. From the hidden list you can now choose the fields
    you want to have shown. If the technical name is shown for the fields,
    the special fields are all starting with '1-U_'. It's important, that
    you add the Special field, if the field also exist as Standard field.
    The Special fields are shown in the bottom of the Hidden list.
    Review the solution part of note 215798 the detailed steps.
    XREF1 / XREF2 do not exist in the index table (BSIS/BSAS) for the G/L
    account. Therefore you should create XREF1/2 as special field for
    display via FAGLL03/FBL3N.
    SPRO - ... - Define Special Fields for Line Item Display
    There you should also include the field and store the change.
    You do not have to run the RFPOSXEXT again, because the related
    structure is generated automatically within the storage of the data.
    After you have stored the 'new' field, you should run the report
    BALVBUFDEL. This report will reset the ALV buffer, because the old
    definition of the fieldcatalog does not have the needed fields, and
    so it might happen that these are not displayed in the fieldlist of
    the FAGLL03.
    Please refer to the attached 984305 and 215798 Point 3.
    Regards,
    Fernando

Maybe you are looking for