Display line items not possible!
Hello
I've a very strange situation on the productive system:
I have a company code that registers and display account line items, while the second cannot display them, even if I've configurated the same aspects in account fields for the two company codes. That means they have the same
- flag on display line items AND
- sort key 001 - POSTING DATE
why??
thanks a lot in advance,
Chiara
No, the answer was not that one, but thanks anyway.
Finally I found the answer in
Forum: Message MSITEM033 in New GL - Cannot Display GL Line Items
note OSS:
- 1323960 Incorrect entry '/' in SKB1-XLGCLR and BSEG-XLGCLR
- 1149500 Clearing open items by batch input selection
- 1437341 Note 1437341 - Correction of BSEG/Index tables after note 1323960
regards,
Chiara
Similar Messages
-
Profit Center Clearing Account Line Item not possible to display ?
Hi
All Experts ,
I want to see the line items for Profit Center clearing account ( Zero Balancing ) in FS10N but after double clicking in system
shows no line item possible for this account.
Please suggest some T.codes or reports through which I can see line items for Profit Center clearing account.
Is there any different configurations made for Profit center clearing account ?
Regards,
Sharvari.
Edited by: Sharvari Joshi on Jul 18, 2009 2:27 PM
Edited by: Sharvari Joshi on Jul 18, 2009 2:32 PMDear Sharvari,
You are not able to see line items because "line items" field in master record must not have been selected. To check it goto
FS00, enter your GL account. For documents which have already been posted, you will not be able to see line items even after selecting Line Item in master record.
To veiw the line item record for this GL account use table BSEG in SE16.
Regards,
Chintan Joshi. -
Line Item not possible ?
Dear all,
Experts ,
I want to see the line items for my profit center clearing account but I am unable to see it through FS10N line item is not tick in FS00.
Is there any table which can show me actual line item for that GL A/C ?
Help is appreciable.
Regards,
Pankaj.Hello,
Hello,
There is a possibility that you have activate line item display for some of the accounts at a later stage. Meaning that earlier postings were not be shown for the earlier postings but only totals will be made available. Therefore, obviously there is bound to be difference between line item report and totals report.
You need to identify which accounts are being changed with line item display at a later stage.
In case if you forget to keep GL Line item display for an account, but the posting are already made the following steps you would required to get the line item display retrospectively.
1. Note that you are NOT required to make the balance of that GL account to ZERO. Please do not confuse with Open Item Management.
2. Put the check box line item display for the account in FS00. Make sure you are entering right company code.
3. Block the account for posting in COA Segment and Company Code Segment in FS00
4. Go to SA38 and run program RFSEPA01 (Give correct GL Account and Company Code)
5. Now, remove the block you kept on the GL Account in FS00.
This will reset the line item display retrospectively.
Hope this will solve your problem.
Regards,
Ravi -
Displaying line items, although not activated in FS00
Hi everyone!
I've got a question about line items.
I had created a GL account, and in it's master record I didn't activated Display line item. But, when I call transaction for displaying GL account's line items (FAGLL03), I can see line items?
How is that possible?
I know that there are some special cases, for example expense accounts: for every expense account there is a cost element in CO, and no matter settings in FS00, for expense account there is always line item display. Similary, reconciliation accounts always have open items management, irrespective of settings in FS00.
But this is just regular account, with very few settings in master record: its balance sheet account, the account currency is local currency, sort key 001 and field status group G001. And that's all.
Can somebody explaine this?Guys. In addition to above my problem. I was facing this problem due to some graphics issue on my laptop. I was not able to see most of the fields because of Graphics Driver installed on my laptop. ( Later on I got this solution. ).
This seems very unrealistic to hear but my experience is true.
I hope in future if some one will have this issue please check out driver compatibility specially Graphics. This problem may suppose to encounter with Dell.
Anyways Z layout also worked fine as suggested by Guest FICO.
Thank you all.
Regards,
Sharvari Joshi. -
Not able to display line item 20 in contract
I could not able to display line item 20 in the contract document.
line item 10 and 30is there however there is no line item 30. What could be reason and how to enable the same.
MRSIt may also possible if user forgot to enter the line item 20 and jump to line item 30 after 10 as below.
Then system will show as like this -
GR of Delivery completed item not possible for line item of PO/SA ?
Hi,
Am unable to Receive Goods in MIGO an Error - "GR of delivery completed item not possible for line item of PO/SA"?
Regards
Mohammed Khaja Pasha
+919550917395.Hi Mohammed Khaja Pasha ;
Delivery Completed checkbox provides a lot of fonctionality like an additional delivery is not expected, but is possible. If you prevent posting of migo , you can benefit from system messages M7 163 and 254.
You want to ensure that the delivery is made before the planned delivery date : Set message 254.
You want to ensure last possible delivery date : Set message 163.
However ;
The open PO quantity of the PO item equals zero.
The PO item is no longer relevant for materials planning.
The PO item is ignored when letters urging delivery of overdue goods are generated.
The PO item can be deleted and archived.
You can specify whether the Delivery Completed checkbox is to be selected automatically.
Regards.
M.Ozgur Unal -
Hi Gurus,
please help me on this error.. what to do?
No line item display possible for account 41000010 1000
Message no. F4430
Diagnosis
You have determined that displaying line items is not to be possible for G/L account 41000010 in company code 1000.
Procedure
It is presumably a clearing account (incoming check account, GR/IR clearing account) which has its own reports for analysis.Hi,
Intally GOTO FS00 and tick the line item display and then GOTO SE38 and give program RFSEPA01 and execute .
then GIVE co code and GL account number
Documemt 1-999999999
hope this solve your problem
regards,
Santosh kumar -
Multiple line item not appearing in vendor line item in FB60
Hi
I am posting FB60 accounting entry. I am deducting WHT on the invoice.
For ex: Expense amount - Rs. 100000, WHT - 10000
Hence accounting entry is posted:
Expenses A/c.. Dr 100000
To TDS Payable 10000
To Vendor A.c 90000
Now when i see vendor line item in FBL1N there is only one credit line item for Rs.90000.
But my requirement is that, vendor line item report should include two line item:
One for vendor credit i.e. Rs.100000 and one debit for TDS payable for Rs. 10000 and not single line item for Rs.90000
Please let me know how can i get this. Is there any standard report for the same?Hi friend,
unfoortunately the system doesn't post debit for vendor in this case. You have no report to display line items that wasn't posted.
would you like have it:
31 - Vendor ... 10,000.00
25 - Vendor............1,000.00 *
40 - expense .......10,000.00
50 - WHT ..........1,000.00
The standard automatic WHT post directly the invoice amount to vendor account like this:
31 - Vendor ... ...9,000.00
40 - expense ........10,000.00
50 - WHT ...........1,000.00
Tell about your business process. What are you doing for ?
regards -
How to display line items twice in a single page in sap script
HI,
I am working on check printing. I copied the standard driver program and form to Zprogram and ZForm. Which are RFFOUS_C(print program) and F110_PRENUM_CHECK(Form Name).
I want to display the line items twice in the same page and sub sequent pages.
Currently I am able to display line items only once.
Example:
PAGE1.
line item1
line item2
line item3
line item4
line item5
line item1
line item2
line item3
line item4
line item5
line items 1 to 5 which are in main window.
How to achive this problem.
Regards,
vinodHi
I had the same request for a check form in Canada. I solved it by writing the line item output into variables and print these variables in a second window. It was ~10 hours of effort, not a real nice technical solution but it worked.
If you require I can send you a PDF of the sap script form definition. You can contact me at [email protected] Answers can take 1 week or more.
Best regards
JD -
Display line items in Cells of a table- Smartform
Hello All,
Can any one help me achieving the below requirement.
I have a requirement of printing invoice with a smartform. I am displaying line items from a TABLE node by looping VBRP's internal table. There are 12 cells and the 5 th cell contains a number of Dicount rates.
I am displaying these discount rates from LOOP node by looping KONV's internal table within that CELL. The 7 th Cell has got 2 values which are required to be: one aligned to the TOP right corner of the cell and the other to the bottom right side of the cell.
Now the issue description is:
CELL-5: Contains unknown number of values for display within the cell to be positioned as MIDDLE justified for an item(POSNR) of the main item table.
CELL-7: Contains two fixed values :KWERT to be at Top right of the CELL-7and NETWR at the bottom right of CELL-7
I have managed to display the sub items in CELL-5 in the middle by giving values to SPACE BEFORE/SPACE AFTER sections of PARAGRAPH FORMAT in SMART STYLE.
Requirement: Irrespective of number of sub items in CELL-5 the 2 values in CELL- 7 to be aligned as one at the top right and the other to the bottom right cell flexibly . Same applies to other items(POSNR) of MAIN VBRP item table.
The ROWS of the MAIN Table to be flexible enough to shrink the space when then are less number of subitems in CELL-5.
Values in Cell-7 should be adjusted according to contents in CELL-5.
Thanks in advance for your valuable suggestions.Hi,
Do one thing while filling the 5th cell , count the number of values(counter) in it for each record and fill new internal table (Itab_cell7) as follws.
DATA : FLAG,
counter1 type n.
DO COUNTER TIMES.
counter1 = counter1 + 1.
CLEAR FLAG.
IF counter = 1.
WA_CELL7-VALUE = KWERT.
APPEND WA_CELL7 TO ITAB_CELL7.
FLAG = 'X'.
ENDIF.
IF counter1 = (counter1 - 1).
WA_CELL7-VALUE = KWERT.
APPEND WA_CELL7 TO ITAB_CELL7.
FLAG = 'X'.
EXIT.
ENDIF.
IF FLAG NE 'X'.
WA_CELL7-VALUE = ''.
APPEND WA_CELL7 TO ITAB_CELL7.
ENDIF.
ENDDO.
Adjust the code if need as per your data.
In cell 7 under loop node print ITAB_CELL7 values in a text. and prepare a paragragh for alingment.
if it does not work for send me the XML file for your smartform.
Regards,
Antim -
Tds line item not simulating while posting as reference with FBR2
Dear All
When I am posting an Invoice using previous document as reference with Tcode FBR2 WTax line Item not simulating, but while I am posting without reference i.e. with Tcode FB60 it is simulating, this problem i am facing in production server from this fiscal year but in development server it is working properly.
what is the possible cause and how to solve this problem.Hi,
For WHT cannot be deducted by using F-02 OR FB01. It seems system is using the same transaction in background and not FB60 and hence tds is bnot getting deducted.
Regards
Milind Sonalkar -
Dear All,
I have facing one issue at the time posting in MIRO.
I post one of migo doc in date 03/01/2010 , the entry is:( with same material )
Post key description amt curr.( USD)
89 Stk.RM -IMP 32100.00
96 PL.VND.RM.IMP GR/IR 32100.00
40 Purchase RM-IMP 32100.00
50 Purchase offset. 32100.00
And Miro Posting on date 23/03/2010
Post key description amt curr.( USD)
31 xyz Vendor 32100.00
86 PL.VND.RM.IMP GR/IR 32100.oo
89 Stk.RM -IMP -
40 Purchase RM-IMP -
50 Purchase offset. -
But when I post for another po in migo on date 03/01/2010
Post key description amt curr.( USD)
89 Stk.RM -IMP 76800.00
96 PL.VND.RM.IMP GR/IR 76800.00
40 Purchase RM-IMP 76800.00
50 Purchase offset. 76800.00
and miro posting on date 19/02/2010
Post key description amt curr.( USD)
32 yz Vendor 76800.00
86 PL.VND.RM.IMP GR/IR 76800.00
89 Stk.RM -IMP Line item not generated
40 Purchase RM-IMP Line item not generated
50 Purchase offset. Line item not generated
Can any one tell why line item not generated for miro posting .
Regards
MilindHi,
The extra line items will be generated when there are any exchange rate diffrences are there then only shows.
Other wise it wont show those extra line items
Please check group currency , global currency etc. for your extra line items -
Line item not relevant for payment release
Dear Expert,
When I select payment block : 'Payment Request' in FB60. Error Message appear "Line item not relevant for payment release".
I also have set payment block in master vendor and OBB8.
Can you tell me why the error message still appear?
Kindly need your help
Thanks and Regards,
YLDo you have any workflow variant in place?
Moreover, when you have already set the Payment block at Master level, you need not to fix it in transaction level.
Vendor itself will not get paid until unless you remove the block option
Thanks -
FI Archiving - System error: Customer/vendor line item not on OI basis
While archiving FI Documetns using object FI_Documnt, I am getting message System error: Customer/vendor line item not on OI basis for few non archivable documents. Is it like these also open items and can not be able to archive them. Or what is the root cause of these error message.
Regards,
ShaileshHi Adisha,
This error pertains to the accounting fundamentals and SAP does not have anything to do with this....you ask yourself that if you were not using SAP and simlar problem came your way what would you have done...this has no solution...
Either you wait for the next invoice with big amount but which seems bit impractical..
In this we really need to consult the Accounting Standards to see what it could allow.
Regards,
Chintan Joshi -
Problem in display line items in FS10N
Hi all,
I have checked ,check box in G/L account "Line items display " in FS00 in current period ( 4 / 2014 )after that line items get displayed in FS10N for this period .
There is problem in displaying line items for same G/L account with previous all periods such as 3/2014,2/2014,1/2014.
I have tried report "RFSEPA01" it works fine if we enter document number for selection with other parameters ,but it gives error if we run report with just Company code and G/L account .
Please provide any other way to get item details for previous periods or is there any update on report "RFSEPA01".
Please let me know why this issue occurred, if we activated the line item display for the particular G/L account in between the Posting period
Thanks,Hi,
You can check below two programs
RFSEPA01 - for line item display
RFSEPA02 - for open item display
Steps to follow:
1. Block the G/L account from posting
2. Run both programs
3. Unblock the G/L account
this will make the earlier posted items visible.
Regards,
Jyoti
Maybe you are looking for
-
Outputting currency in external format???
I am doing project for an external client. (China). I was outputting some currency values in report. I a mworking from india. Now i am getting warning that i should output currency in external format?? What does that mean??? Rakesh
-
How to view the certificate used in PDF protection ?
Hi, I have a document in my company that is certificate-protected with no printing permission, and I need to know wich certificate was used to protect the document, so we can take action and contact with him. It seems the document is protected with a
-
Change texts in Approve Working Time
Hi, In approve working time we have a dropdown wherein we have options like 'Approve' or 'Approve All'. Can we change the texts of these like 'Approve Time for all'
-
HI Can you explain the difference between DBNODE and WEBNODE
-
Why cant I see the blue guide lines of my paths when I hover my mouse over them?
I'm using illustrator CC(2014) and all of a sudden I cant see the thin blue lines that show me where my paths and anchor point are. Below is a picture of the blue lines I am talking about. They don't appear when my mouse hovers over them, but does if