Display McBook Air MID2013 cambia colore
Salve,
chiedo a tutti voi se potete aiutarmi a risolvere un problema.
Qualche giorno fa, ho ripristinato il mio MacBook Air mid2013 perchè, utilizzando Adobe Photoshop Lighroom 5, era diventato stranamente troppo lento.
Ho ripristinato il tutto utilizzando un backup di Time Machine.
Subito dopo ho aggiornato il sistema e i vari software.
La cosa strana è che da quel giorno, ad ogni avvio del sistema, prima di visualizzare gli utenti del Mac, il display cambia colore sempre nello stesso istante e diventa di colore piu' verde. Questo succede sempre ad ogni avvio e sempre nello stesso attimo e dura 1 secondo.
Ho risolto il problema della lentezza, ma non capisco questo strano cambio di colore verdastro.
Potete aiutarmi ?
E' il caso di installare Mavericks pulito ex nuovo ?
Nell'attesa di una vostra gentile conferma, ringrazio cordialmente.
Valerio
Ciao ragazzi,
nell'attesa di un vostro aiuto, ho formattato l'Hard Disk è ho installato Mavericks pulito.
Purtroppo è sempre la stessa cosa.
Mi correggo per il cambiamento di colore. In fase di caricamento del sistema operativo, prima della visualizzazione dei miei 2 account, lo schermo diventa per 1 secondo blu ( e non verde ).
Continua a fare la sessa cosa anche dopo aver reinstallato Mavericks.
Potete aiutarmi a risolvere il problema ?
Saluti a tutti e grazie
Valerio
Similar Messages
-
New MacBook Air display has same 6 bit color? I bet it does.
Sadly, all we have for color depth in the tech specs is the same old 'support for millions of colors' which we know in the past to have been a total lie. All the laptop displays have been 6 bit color, 262,144 colors, period. A great article on 6 bit versus 8 bit color can be found at:
http://compreviews.about.com/od/multimedia/a/LCDColor.htm
The tech specs for the new laptops don't indicate any improvement.
And yes, the displays use dithering to fake millions of colors. Yes, all displays use mixing of RGB colors to fool the eye into seeing millions of colors. And yes, not one laptop display I am aware of, including PCs, has adequate color depth to allow any real color matching for professional use. Use a high end external display for color matching purposes. CRTs are still considered adequate if not superior for this purpose.Umm...
Every laptop has 6bit colors. There aren't any 8bit laptop panels that Apple could use infact. Except for some very new 17" ones...
The thing is, 8 bit panels use more power and are regarded by most of the industry as overkill for laptops.
Anyway I repeat, there are no 13" 8bit panels in existence.
You want 8 bit color? Plug in a CinemaHD or a Dell VA or IPS panel. -
My iMac desktop and McBook Air laptop run on Mavericks. The laptop also runs Windows 7 via VM Ware Fusion. Can I transfer this capability to my McBook Air, so I can run the same plus the Windows programs on my laptop?
Thanks Kappy, but I should add that my desktop runs VMWare Fusion and Windows 7. My laptop and desktop basic operating systems are Mavericks. When I travel, I take my laptop with me. My desktop runs a Windows investment program I like, and I'd like to be able to use this program in my laptop when I'm on the road. VM Ware said I could do this, but would have to make and then transfer a "file" of the programs in question. How would this be done, since it would involve 3 files: Fusion, Windows 7 and the investment program? Maybe Apple should do this at the genius bar? Appreciate any comments...Thanks again, Patrick
-
After forced shut down iosx does not accept the password on the mcbook air
Hi there,
I cannot login into the mcbook air after having to force a shut down.
- While surfing with Safari, the mcbook froze for a longer period of time.
- We forced the shut down pressing the on/off button.
- After rebooting, we have a grayish screen with the apple logo, the user name, the password field and in the bottom three options: idle mode (rest), restart & shut down.
- When the password is entered, the wheel shortly turns and the mcbook stays with the same login screen without letting me enter the mcbook.
- When using an incorrect password the password-field shakes.
I tried booting with CMD + R and did check the volume and the access rights. Both showed no failures.
What could I try next to fix the problem? Ideally without having to set up the mcbook from scratch and losing the settings and data.
I do not know the exact IOSX status. It was bought in Nov-2012 and updated once since then I assume it is Snow Leopard
Thank you for your help!
Regards
Lottchen2007If you can boot into the Recovery Volume, it isn't Snow Leopard.
Startup - Gray, Blue or White screen at boot, w/spinner/progress bar
Startup - Gray Screen
Startup Issues - Resolve
Startup Issues - Resolve (2) -
Hi there,
Chinese and Japanese font / character still cannot display in AIR 13.0 or 14.0.0.103 , Android 4.4.2
Korean font is OK.
Any ideas??
Thanks!
ContraCould you please open a new bug report on this over at bugbase.adobe.com? When adding the bug, please include sample code or an application so we can quickly test this out internally. If you'd like to keep this private, feel free to email the attachment to me directly ([email protected]).
Once added, please post back with the URL so that others affected can add their comments and votes. I can also follow up once I get the bug number. -
The display has lines and the color is strange.
The Retina display has lines and the color is very light when I turn on iPad mini. When I woke up and turned it on this morning, it happened. I have no idea what happened since the iPad mini has been gotten no physical damage.
Hi:
I would try a hard reset of the notebook.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01684768&cc=us&dlc=en&lc=en&jumpid=reg_r1002_us...
If that doesn't work and considering all of the other steps you took to remedy the issue, I would say the BIOS update wrecked something permanently. -
When I log in to my mac pro all it displays is the spinning mult-colored wheel.
When I log onto my macbood pro all it displays is the spinning mulit-colored wheel for a while and then comes right back to the log on frame.
Time to visit an Apple repair station.
27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10.1), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2 -
I want to display specific line to be color in alvlist how
i want to display specific line to be color in alvlist
i write the code as follows here document type is initial. then that line is to be
appeared as color line but problem is initially it is appeared correct later i moved to next previous screens error lines are to be colored where i have to clear
loop at it_doclist where blart eq space.
gt_layout-info_fieldname = 'COLOR_LINE'.
it_doclist-color_line = 'C600'.
modify it_doclist .
clear:it_doclist.
endloop.
please help me exactly
Thanks
Ramana reddyu r requiremnt is not clear...but any how check this code....
it has a form for assigning colors....
rewardif useful
REPORT zppb001_prd_posting_upload
NO STANDARD PAGE HEADING LINE-SIZE 255
MESSAGE-ID zpp.
INCLUDE bdcrecx1.
TYPE-POOLS :slis.
DATA: wk_success(5) TYPE c, "To store the successfull Hits
wk_failure(5) TYPE c, "To store the failed Hits
l_mstring(600), "To store Message texts
t_date TYPE zservice_date,"To store Uploaded Date
wk_lines(5) TYPE c, "To store No of Records
lines(5) TYPE c, "To store No of Records
wk_len(150) TYPE c, "To store File path
wk_alp TYPE i, "To store path length
lent TYPE i, "To store path length
b(4). "To store File extension
DATA: alvfld TYPE slis_t_fieldcat_alv WITH HEADER LINE,
v_events TYPE slis_t_event WITH HEADER LINE,
wk_events LIKE LINE OF v_events,
it_list_comments TYPE slis_t_listheader,
wk_list_comments LIKE LINE OF it_list_comments,
wk_layout TYPE slis_layout_alv.
CONSTANTS: c_formname_top_of_page TYPE slis_formname
VALUE 'F_TOP_OF_PAGE'.
--TO STORE FINAL DATA TO BE POSTED--
Generated data section with specific formatting - DO NOT CHANGE ***
DATA: BEGIN OF record OCCURS 0,
budat_002(010),
bktxt_004(025),
matnr_005(018),
werks_006(004),
alort_007(004),
erfmg_008(017),
END OF record.
End generated data section ***
DATA: BEGIN OF messages OCCURS 0, "TO STORE FINAL STATUS DISPLAY
budat_002(010),
bktxt_004(025),
matnr_005(018),
maktx TYPE makt-maktx,
werks_006(004),
alort_007(004),
erfmg_008(017),
msg_e(400),
msg_s(600),
msgtyp TYPE c,
line_color(4),
END OF messages.
DATA: BEGIN OF st_record1 ,
matnr_005(018),
werks_006(004),
budat_002(010),
bktxt_004(025),
erfmg_007(017),
erfmg_008(017),
alort_007(004),
END OF st_record1.
DEFINE alv_macro.
move : &1 to alvfld-col_pos,
&2 to alvfld-fieldname,
&3 to alvfld-seltext_m.
if &2 = 'MATNR_005' or &2 = 'MAKTX'.
alvfld-fix_column = 'X'.
endif.
append alvfld.clear alvfld.
END-OF-DEFINITION.
DATA : record1 LIKE TABLE OF st_record1 WITH HEADER LINE,
it_excel LIKE TABLE OF alsmex_tabline WITH HEADER LINE,
messtab1 LIKE bdcmsgcoll OCCURS 0 WITH HEADER LINE,
it_acc LIKE TABLE OF record WITH HEADER LINE,
it_rej LIKE TABLE OF record WITH HEADER LINE.
SELECTION-SCREEN SKIP 1.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-002.
PARAMETERS: p_file TYPE localfile OBLIGATORY .
SELECTION-SCREEN END OF BLOCK b1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
static = 'X'
CHANGING
file_name = p_file.
AT SELECTION-SCREEN ON p_file.
wk_len = p_file.
CONDENSE wk_len NO-GAPS.
lent = STRLEN( wk_len ).
wk_alp = lent - 4.
b = wk_len+wk_alp(lent).
IF ( b NE '.txt' ) AND ( b NE '.xls' ).
MESSAGE e939.
CLEAR p_file.
STOP.
ENDIF.
START-OF-SELECTION.
PERFORM upload_fun.
PERFORM open_group.
PERFORM fill_bdc_table.
PERFORM close_group.
PERFORM assign_colors.
PERFORM f_event_build.
SORT messages BY matnr_005 ASCENDING.
PERFORM assign_columns.
PERFORM count.
IF ctu = 'X'.
PERFORM alv.
ENDIF.
FREE:messages,messtab1,record1.
END-OF-SELECTION.
--FORM UPLOAD_FUN--
FORM upload_fun.
REFRESH: record1, it_acc, it_rej, record, messages, messtab1, it_excel.
PERFORM fetch_from_flat_file.
CLEAR it_excel.
DESCRIBE TABLE it_excel.
IF sy-tfill = 0.
MESSAGE i937. STOP.
ENDIF.
LOOP AT it_excel.
CASE it_excel-col.
WHEN '0001'. MOVE: it_excel-value TO record1-matnr_005.
WHEN '0002'. MOVE: it_excel-value TO record1-werks_006.
WHEN '0003'. MOVE: it_excel-value TO record1-budat_002.
WHEN '0004'. MOVE: it_excel-value TO record1-bktxt_004.
WHEN '0005'. MOVE: it_excel-value TO record1-erfmg_007.
WHEN '0006'. MOVE: it_excel-value TO record1-erfmg_008.
WHEN '0007'. MOVE: it_excel-value TO record1-alort_007.
ENDCASE.
AT END OF row.
APPEND record1. CLEAR record1.
ENDAT.
ENDLOOP.
DELETE record1 WHERE matnr_005 EQ ' '.
--DO NOT UPLOAD WHERE PRD QTY = 0--
DELETE record1 WHERE ( erfmg_007 = 0 OR erfmg_007 = ' ' )
AND ( erfmg_008 = 0 OR erfmg_008 = ' ' ).
DESCRIBE TABLE record1[].
IF sy-tfill > 0.
--MOVE ACCEPTED QTY AND FETCH THE RESPECTIVE STGLOC-**
LOOP AT record1 WHERE erfmg_007 NE 0 AND erfmg_007 NE ' '.
MOVE: record1-budat_002 TO it_acc-budat_002,
record1-bktxt_004 TO it_acc-bktxt_004,
record1-matnr_005 TO it_acc-matnr_005,
record1-werks_006 TO it_acc-werks_006,
record1-erfmg_007 TO it_acc-erfmg_008.
APPEND it_acc. CLEAR: it_acc,record1.
ENDLOOP.
--MOVE ELPRO FOR THE ACCEPTED ENTRIES--
LOOP AT it_acc.
SELECT SINGLE elpro INTO it_acc-alort_007
FROM mkal CLIENT SPECIFIED
WHERE mandt = sy-mandt
AND matnr = it_acc-matnr_005
AND werks = it_acc-werks_006.
MODIFY it_acc TRANSPORTING alort_007. CLEAR: it_acc.
ENDLOOP.
--MOVE PRD QTY FOR REJECTED QTY--
LOOP AT record1 WHERE erfmg_008 NE 0 AND erfmg_008 NE ' '.
MOVE: record1-budat_002 TO it_rej-budat_002,
record1-bktxt_004 TO it_rej-bktxt_004,
record1-matnr_005 TO it_rej-matnr_005,
record1-werks_006 TO it_rej-werks_006,
record1-erfmg_008 TO it_rej-erfmg_008,
record1-alort_007 TO it_rej-alort_007.
APPEND it_rej. CLEAR: it_rej, record1.
ENDLOOP.
--MOVE ACCEPTED AND REJECTED READINGS TO FINAL TABLE
APPEND LINES OF it_acc TO record. APPEND LINES OF it_rej TO record.
FREE : it_rej, it_acc, record1.
ELSE.
MESSAGE i937.
STOP.
ENDIF.
ENDFORM. " UPLOAD_FUN
--FORM fill_bdc_table--
FORM fill_bdc_table.
IF NOT record[] IS INITIAL.
LOOP AT record.
PERFORM bdc_dynpro USING 'SAPLBARM' '0800'.
PERFORM bdc_field USING 'BDC_CURSOR' 'RM61B-BKTXT'.
PERFORM bdc_field USING 'BDC_OKCODE' '=ISTDA'.
PERFORM bdc_field USING 'RM61B-BUDAT' record-budat_002.
PERFORM bdc_field USING 'RM61B-BKTXT' record-bktxt_004.
PERFORM bdc_field USING 'RM61B-MATNR' record-matnr_005.
PERFORM bdc_field USING 'RM61B-WERKS' record-werks_006.
PERFORM bdc_field USING 'RM61B-ALORT' record-alort_007.
PERFORM bdc_field USING 'RM61B-ERFMG' record-erfmg_008.
PERFORM bdc_dynpro USING 'SAPLCOWB' '0130'.
PERFORM bdc_field USING 'BDC_OKCODE' '=WEIT'.
PERFORM bdc_field USING 'BDC_CURSOR' 'G_COWB_HEADER-MNGTXT'.
PERFORM bdc_transaction USING 'MFBF'.
CLEAR messtab.
messtab1[] = messtab[].
LOOP AT messtab1 WHERE msgtyp = 'S' OR msgtyp = 'E'.
SELECT SINGLE * FROM t100 WHERE sprsl = messtab1-msgspra
AND arbgb = messtab1-msgid
AND msgnr = messtab1-msgnr.
IF sy-subrc = 0.
l_mstring = t100-text.
PERFORM store_messages.
CLEAR l_mstring.
ENDIF.
ENDLOOP.
MOVE-CORRESPONDING record TO messages.
SELECT SINGLE maktx INTO messages-maktx FROM makt CLIENT SPECIFIED
WHERE mandt = sy-mandt
AND matnr = messages-matnr_005
AND spras = 'EN'.
APPEND messages.
CLEAR: messages, messtab1. REFRESH messtab1.
ENDLOOP.
ENDIF.
ENDFORM. "fill_bdc_table
--FORM assign_columns--
FORM assign_columns .
REFRESH alvfld.
alv_macro '1' 'MATNR_005' 'PART NO'.
alv_macro '2' 'MAKTX' 'DESCRIPTION'.
alv_macro '3' 'WERKS_006' 'PLANT'.
alv_macro '4' 'BUDAT_002' 'POSTING DATE'.
alv_macro '5' 'BKTXT_004' 'SHIFT'.
alv_macro '6' 'ERFMG_008' 'QUANTITY'.
alv_macro '7' 'ALORT_007' 'STGLOC'.
alv_macro '8' 'MSG_E' 'ERRORS DUE TO'.
alv_macro '9' 'MSG_S' 'STATUS'.
ENDFORM. " assign_columns
--FORM f_event_build--
FORM f_event_build .
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
i_list_type = 0
IMPORTING
et_events = v_events[].
READ TABLE v_events WITH KEY name = slis_ev_top_of_page
INTO wk_events.
wk_layout-info_fieldname = 'LINE_COLOR'.
wk_layout-colwidth_optimize = 'X'.
IF sy-subrc = 0.
MOVE c_formname_top_of_page TO wk_events-form.
MODIFY v_events FROM wk_events INDEX sy-tabix.
ENDIF.
ENDFORM. " f_event_build
--FORM f_top_of_page--
FORM f_top_of_page.
WRITE sy-datum TO t_date.
CLEAR: it_list_comments[].
wk_list_comments-typ = 'H'. "H=Header, S=Selection, A=Action
wk_list_comments-key = ''.
CONCATENATE 'UPLOADED STATUS FOR PRODUCTION POSTING ON - ' t_date INTO
wk_list_comments-info SEPARATED BY space.
APPEND wk_list_comments TO it_list_comments.
CLEAR wk_list_comments.
DESCRIBE TABLE messages LINES wk_lines.
lines = wk_lines.
wk_list_comments-typ = 'S'. "H=Header, S=Selection, A=Action
wk_list_comments-key = ''.
CONCATENATE 'Total No of Hits:' lines INTO wk_list_comments-info
SEPARATED BY space.
APPEND wk_list_comments TO it_list_comments.
CLEAR wk_list_comments.
wk_list_comments-typ = 'S'. "H=Header, S=Selection, A=Action
wk_list_comments-key = ''.
CONCATENATE 'Successfull Hits:' wk_success INTO
wk_list_comments-info SEPARATED BY space.
APPEND wk_list_comments TO it_list_comments.
CLEAR wk_list_comments.
wk_list_comments-typ = 'S'. "H=Header, S=Selection, A=Action
wk_list_comments-key = ''.
CONCATENATE ' Failed Hits:' ' ' wk_failure INTO
wk_list_comments-info
SEPARATED BY space.
APPEND wk_list_comments TO it_list_comments.
CLEAR wk_list_comments.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
i_logo = 'ENJOYSAP_LOGO'
it_list_commentary = it_list_comments.
ENDFORM. "F_TOP_OF_PAGE
--FORM assign_colors--
FORM assign_colors .
LOOP AT messages.
CASE messages-msgtyp.
WHEN 'E'.
messages-line_color = 'C601'.
WHEN 'S'.
messages-line_color = 'C501'.
ENDCASE.
MODIFY messages TRANSPORTING line_color.
ENDLOOP.
ENDFORM. " assign_colors
--FORM COUNT--
FORM count .
CLEAR: wk_failure, wk_success.
LOOP AT messages.
CASE messages-msgtyp.
WHEN 'E'.
ADD 1 TO wk_failure.
WHEN 'S'.
ADD 1 TO wk_success.
ENDCASE.
ENDLOOP.
ENDFORM. " COUNT
--FORM ALV--
FORM alv .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = sy-repid
is_layout = wk_layout
it_fieldcat = alvfld[]
it_events = v_events[]
TABLES
t_outtab = messages
EXCEPTIONS
program_error = 1
OTHERS = 2.
ENDFORM. " ALV
--FETCH_FROM_FLAT_FILE--
FORM fetch_from_flat_file .
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING
filename = p_file
i_begin_col = 1 "From 1st Column
i_begin_row = 2 "From 2nd row
i_end_col = 7 "Till 7th Column
i_end_row = 65000 "Till Row
TABLES
intern = it_excel
EXCEPTIONS
inconsistent_parameters = 1
upload_ole = 2
OTHERS = 3.
ENDFORM. " FETCH_FROM_FLAT_FILE
--FORM STORE_MESSAGES--
FORM store_messages.
IF l_mstring CS '&1'.
REPLACE '&1' WITH messtab1-msgv1 INTO l_mstring.
REPLACE '&2' WITH messtab1-msgv2 INTO l_mstring.
REPLACE '&3' WITH messtab1-msgv3 INTO l_mstring.
REPLACE '&4' WITH messtab1-msgv4 INTO l_mstring.
ELSE.
REPLACE '&' WITH messtab1-msgv1 INTO l_mstring.
REPLACE '&' WITH messtab1-msgv2 INTO l_mstring.
REPLACE '&' WITH messtab1-msgv3 INTO l_mstring.
REPLACE '&' WITH messtab1-msgv4 INTO l_mstring.
ENDIF.
CONDENSE l_mstring.
IF messtab1-msgtyp = 'E'.
CONCATENATE messages-msg_s l_mstring INTO l_mstring SEPARATED BY space.
MOVE l_mstring TO messages-msg_e.
MOVE 'E' TO messages-msgtyp.
MOVE 'Document Not Posted' TO messages-msg_s.
ELSEIF messtab1-msgtyp = 'S'.
CONCATENATE messages-msg_s l_mstring INTO l_mstring SEPARATED BY space.
MOVE l_mstring TO messages-msg_s.
MOVE 'S' TO messages-msgtyp.
ENDIF.
ENDFORM. " store_messages -
unable to find appropriate driver for my mcbook air using a ricoh aficio mp36501SP network printer. had similar problem with another ricoh copier/printer, but was able to resolve that problem entering ip address. this one wants job code. i don't believe mac allows for input on job code or printer code for permission to print
I'm having similar problems with an HP OfficeJet 6500. One suggestion that improved the situation, but did not totally solve the problem, was to select "OfficeJet Pro L7700" for its drivers.
One other suggestion is to turn off the printer, then simultaneously hold down the "#" and "9" keys and turn the printer back on. This hot key seems to reset the printer to factory defaults, allowing you to set things up anew.
Finally, kvetch to HP. Their networking software clearly has problems in its relationship to OSX, but nobody on either side seems motivated to bring in a good therapist. -
MacBook Air, Mid2013, MacOS 10.9.2
I tried to erase the HD of my Mac; Apple Support suggested to restart the computer pressing cmd + R, then select "Utility Disk", then Mac HD, and choose "Erase", the option "Security Options" should be available, but it was not
I was able to erase the disk and reinstall the OS but not to choose the option to overwrite the disk, as the official Apple Support said previously.
I called again them, this time I was said that with an SSD disk the security option (overwrite the disk) is not available, and that is it, no way out; and they added very kindly that if I sell my Mac, the buyer could bring it to a Tech Center and they could eventually recover the data on it, even though this may be expensive
Is there anyone that has any suggestion to protect the data before selling a Mac; the guys at Apple Official Support did not seem very concerned about thisI was unable to access the laptop last night to create a new user; however my client would perfer not to try a second account since that would make it unusable for him while we test the second profile.
Also John Sophos was installed after this started to verify that it was not a virus/malware (I know pointless step but it has happened to me before) so I don't think that is the problem -
Hi Everyone
I living in Japan and I had purchased in September a McBook Air 13" with OS Mountain Lion updated today to OS Mavericks.
This unit don't have iWork so my question is
Do you know why latest McBook Air don't have included this basic software?.
We have also a latest 2009 iMac, all iPhone models (3*/3G*/3GS*/4/4S/5 and 5S) and iPad. All devices running with latest OSX and iOS
Your help will be highly appreciate
Regards
Jay
(*exceptions)Dear Sir
Thanks for your reply, I really appreciate. Obviously I had try to download from App Store but show me ¥ 2.000 per aplication, so is not available to download for free.
I'm not sure the reason about that, but is really strange, even I download for free in my 5S Pages, Numbers and Keynote.
Otherwise thanks again for your help.
Best Regards
Jay -
How can I associate McBook Air and with iTunes
would you give me advice how to associate McBook Air with iTunes.
iTunes shows only iPhone, but not Air.
Maybe that is the reason why I can't synchronize calender and contacts between Outlook and iPhone.On your MacBook Air's iTunes, use the menu to go to Store > Authorize This Computer
Sign in with your Apple ID and password.
That should do it! -
I need an adobe flash player for my iPad and McBook Air
I have tried to install an adobe flash player in my iPad and McBook Air but failed.
How can I get an adobe flash player for my iPad and MacBook Air ??Flash Player has never worked on iOS devices (iPad or iPhone). Adobe has stopped supporting Flash on mobile devices, including Android devices.
Time to move on... -
Why don't I have airdrop on my McBook Air with Lion 10.7.5?
Why don't I have airdrop on my McBook Air with Lion 10.7.5?
Hello Ann,
What other computer are you trying to share with? If you are trying to do this with your iOS device, then you will need to have OS X Yosemite installed. Take a look at the articles below for more information and if you need more assistance, let me know.
Using AirDrop with OS X Lion, Mountain Lion or Mavericks
http://support.apple.com/en-us/HT202267
Mac Basics: AirDrop lets you send files from your Mac to nearby Macs and iOS devices
http://support.apple.com/en-us/HT203106
Regards,
-Norm G. -
I have an iPhone 3GS. It It shutdowns random, it fails to turn on, it displays a white screen with colors lines.
I have the 3GS and it recently started the RSD. At first I thought it was just the batter not holding a charge and being lower than what the display showed. However, even when fully charged the RSD's occur mostly when loading either Apps or web pages in Safari.
I have not experienced the white screen and colored line, yet apparently. Is this the logic board like in the MacBook's?
iPhone 3GS, IOS 4.2
Maybe you are looking for
-
how to run a javascript program in dreamweaver cs6?
-
How well does the express work in a 2400 square foot home being on the top floor? us on the bottom floor
-
[solved] could not load module 'processor'
Since the recent upgrade to kernel 2.6.20.7-1 the acpi kernel modules have to be loaded manually. Thats all good, i don't have a problem with that. On my desktop I load 'button', 'processor'. But since the upgrade to 2.6.20.7-2 the module 'processor
-
Changing file associations for Stuffit
Soooo, I tried opening a BIN file using Stuffit Expander (well, indirectly using it by opening the file from Firefox), but because the VLC Media Player has changed the file associations so that by default it opens them, I can't open it (and for the r
-
I currently have a CSS 11503 LB that I am using to balance 443 and 80 traffic and I have it working but my question is if a users are coming from a proxy should I continue to use Layer 3 LB technique? Also is it possible to see the real IP address in