Display message from exit function on web

Hi all,
Is there a way to display the output error message from Exit Function on web interface?
Regards,
Kadir

Hi All,
I have a similar problem - but for variable exits.
The solution posted by Kadir works fine for an exit changing xthdata (bps exit function).
I want to display a message in Web created within an bps variable exit. In this case the solution does not work.
Does anyone of you experts have an idea how to append a message to the message table used for the WebInterface?
Thanks in advance and best regards
Steffen

Similar Messages

Why is Mail 6.2 not displaying messages from my Exchange account?

Greetings,
I have a new 13" MacBook Air running Mountain Lion and I'm noticing that most of the time my Mail inbox is not displaying messages from my work Exchange account; however, it does display messages correctly for my Gmail account. I've included a screen shot of what I'm experiencing.
Any ideas?
Thanks,
Garry

I have the same problem, as does a coworker. It happens, for instance, if I click on another mailbox (such as Junk) then go back to the inbox. Our company uses Exchange. Quitting mail usually fixes it. A rebuild of the mailbox will too. Only happens on my Mac at work, not my Mac at home (connected via VPN).
Another problem I have is with mail not syncing. Mail I have deleted from another device (such as on my Mac at home or my iPad) does not get deleted from my inbox at work. Sometimes they'll go away when I click on them. Other times they won't go away and the only way to delete them is to rebuild the mailbox.
And lately I have had problems with attachments. Attachments sent from my Exchange account at work show up as .eml attachments in my iCloud account and mime attachments on my iPad or as a string of characters (20-30), not as an attachment. This happens whether sent from home or work.
I have our IT department looking into the third problem (which is the most vital one for me). I'll report the other two annoying problems and see what they can figure out.

Display messages from PL/SQL?

I am running some PL/SQL code from Application Builder > Page Definition > Processes After Submit > Source. Can the PL/SQL code be written to display messages (like the Messages attribute does)?
I tried using htp.prn, but couldn't make it display. How do you do it?
Thank you.

Wolfram,
Since your process is running after submit any calls to htp.prn will not be displayed. In order to see your messages you either have to run your process before header or at any of the other processing points during the rendering portion of a page or you have to assign the display message to a page item which will maintain the value for when the next page is rendered.
Cheers,
Tyson Jouglet

Catching error message from standard function module to internal table.

Hi,
i am calling a FM in my custom prog.
After execution of the FM some auto generated errors is getting displayed.
I want to pass this error to an internal table.
Please tell me how to do this?
    CALL FUNCTION 'FORMAT_CHECK'
      EXPORTING
        i_checkrule   = t005-prbkn
        i_checkfield = it_ven-bankn
        i_checklength = t005-lnbkn
        i_checkmask   = space
        i_fname       = fname
      EXCEPTIONS
        not_valid     = 1
        OTHERS        = 2.
IF sy-subrc <> 0.
       MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
I want to catch this particular error message in the itab.
Thanks,
SAM.

Even we can create an internal table nad move the messages to it.
DATA : BEGIN OF L_ERR OCCURS 0,
        SNO LIKE SY-tabix,                                  "serial no
        MSGTY LIKE SY-MSGTY,                         "message type
        MSGNO LIKE SY-MSGNO,                        "message no
        ERR_TEXT LIKE T100-TEXT,                     "message text
       END OF L_ERR.
   IF SY-SUBRC <> 0.
          L_ERR-SNO      = SY-TABIX.
          L_ERR-MSGTY    = SY-MSGTY.
          L_ERR-MSGNO    = SY-MSGNO.
          L_ERR-ERR_TEXT = TEXT-015.                        "Problem encounterd in uploading data.
          APPEND L_ERR.
          clear L_ERR.
     ENDIF.

How to capture error message from standard function module

Dear friends
when i execute standard function module in finance , i am getting error message , pls check the below screen shot,
how to capture the below error message so that i have display in my webdynpro component
Thanks
Vijaya

Hello Vijaya,
Incase of BAPI's they have a return table parameter T_RETURN. Just read that return table to get the error message.
Incase of normal function modules, there will be exceptions raised for the message used inside the function module. Just read the sy-subrc after the FM and based on the sy-subrc value find the respective exception raised.
May be you can try like this, whenever the message is raised it will be stored in the system variable.
CALL FM.
check for the system variables.
sy-msgid = Message ID of the latest message raised.
sy-msgno = message number of the latest message raised.
sy-msgty = message type of the latest message raised.
sy-msgv1 = variable1 of the latest message raised.
sy-msgv2 = variable2 of the latest message raised.
sy-msgv3 = variable3 of the latest message raised.
sy-msgv4 = variable4 of the latest message raised.
Regards,
TP

How to retrieve and display image from database in a web page

Hi all;
I have been trying this for some time now. I have found some tutorials so far but none of them addresses my concern. Here it is:
I have built a web application that can connect to an Oracle DB.
I have a table called "employee", where I record any employee details, among which the employee picture. I stored the pictures and the finger prints using "Oracle sql developper" as blob type.
How can i retrieve and view all these information when i run the application?
I can easily retrieve all other types of value, but the image(BLOB type) has been a nightmare for me.
HELP PLEASE.

morgalr wrote:
I believe your Binary Large Obejct will come back as an array of int, and you'll need to use BufferedImage it's associated API to get it to a viewable image configuration.I don't think BufferedImage immediately solves the problem -- this is a web app, so I assume the image will be displayed using the HTML IMG tag.
Solution: google. There are many example of how to do this. For example, any book on servlets will have an example of dishing up a dynamic image.

Display image from binary code in web service(Sharepoint portal)

Hi All,
We have converted a BAPI into web service.We are able to access it and fetch the data in sharepoint portal. The content which gets published in the sharepoint needs one image also to get displayed.The problem is we have the binary format but we are not able to decode that and display that as image in sharepoint portal.
We are using VS2003 to make the portal component and then deploy it in sharepoint portal.We are stuck how to decode the binary format and display the image.
Any Help will be appreicated.
Regards
Sachin

Hi All,
We have converted a BAPI into web service.We are able to access it and fetch the data in sharepoint portal. The content which gets published in the sharepoint needs one image also to get displayed.The problem is we have the binary format but we are not able to decode that and display that as image in sharepoint portal.
We are using VS2003 to make the portal component and then deploy it in sharepoint portal.We are stuck how to decode the binary format and display the image.
Any Help will be appreicated.
Regards
Sachin

Display Message from a procedure

Hi
I have a trigger when-button-pressed. It has a prcedure that would be run. The procedure would display a message once it is run. I would like to display the message on a popup window on the form. How can I achieve this

Hello,
thaks for the lot of details you give...
I suppose thart "external" is database ? If yes, you cannot directly display a message to Forms.
You can manage this only when the control returns back to Forms.
Francois

Receive asynchronous message from JMS topic over web service

Hi,
I have a JMS topic and I want to expose it as a web service so that clients can
make durable subcription to the topic and receive messages asynchronously. What
is the best way of doing this ? Is there a portable (to other containers) way
of do this ? If not, is there a web logic specific way of doing this ?
Thanks,
Siva

So you expect clients to be receiving SOAP messages over HTTP? In this
case, the clients are really servers that are capable of servicing SOAP
requests, correct? And how about the senders: are they also using
SOAP/HTTP to send messages that are delivered to the receivers?
It should be possible to write this yourself using JMS not as the
transport, but as a mechanism for distributing the message to a set of
clients. You'll need to implement a Web Service for publishing to a
topic, an operation for registering an end point to recieve messages,
and an MDB (or other form of JMS subscriber) executing on the server to
relay the message to the end point.
Siva wrote:
Hi,
I have a JMS topic and I want to expose it as a web service so that clients can
make durable subcription to the topic and receive messages asynchronously. What
is the best way of doing this ? Is there a portable (to other containers) way
of do this ? If not, is there a web logic specific way of doing this ?
Thanks,
Siva

Display Message from automatically FOX-Formula

Hello,
we are using a FOX-Formula as automatically Function "After data change" within the planning-layout (WebInterface).
Does anybody know, how we can tune the function / layout, that we will see this message if the conditions agree?
For example:
IF {ZK_MWERTD, '301', 'KVBE', '01'} <> 0.
MESSAGE I002(ZBW).
ENDIF.
If we are using this function by function-button, it works quite well. But not in this case, we are using it by automatically function.
Best regards
Daniel Eiduzzis

Hi Daniel,
if I remember it right, the messages do only appear if they are error messages.
I am not sure about Warnings, so try it with the message type W or E.
regards
Cornelia

Display messages from FM

Hi All
I am using FM SHP_DELIVERY_CREATE_FROM_SLS, it returns messages ET_MESSAGES.
How can i collect and display these message in WD. I know by using T100 message,
but here getting type problem? please help.
Thanks,
Venky.

Hi,
Please make sure the data type of the 3 parameters (msgid, msgno, msgty) is as type define within the method.
Alternatively, this is how I did it my way...
      DATA ls_messages TYPE bapireturn1.
      ls_messages-id      = 'PG'.               " TYPE syst-msgid
      ls_messages-number = '199'.        " TYPE syst-msgno
      ls_messages-type    = 'E'.               " TYPE syst-msgty
      wd_comp_controller->go_message_manager->report_t100_message(
        EXPORTING
          msgid = ls_messages-id
          msgno = ls_messages-number
          msgty = ls_messages-type ).

Problems with different received message from sql function

Hello all!
I have a little problem with my BPEL process. I call a sql function that returns a string. In this string I have a xml. The returned message can be something like:
<error><id>id_error</id><message>descr_error</message></error>
or
<comm>
<header>
children tags
</header>
<body>
children tags
</body>
</comm>
As you see, I can receive two types of messages. Of course, the process transforms string -> xml.
Depending on the type, the process must choose between two flows.
My questions are: what should be the solution(the steps) to determine what type of message the function returns? In my project, where should I define the same message types in order to assignate them to a variable? In a xsd?
Thanks in advance!!

seems like you could solve this with a <pick>. Take a look at the section "One Request, One of Two Possible Responses" in chapter 13 of the bpel developer guide.

Mail not displaying messages from self as Unread

Mails that I send to myself have suddenly stopped showing up as automatically unread in the inbox. Neither does the dock icon for Mail show the red circle indicating a new mail. Similarly with Ical mails alerts to me. Any clue which setting has got messed up?

Once upon a time, with POP access at least, addressing a Gmail message to self would not be presented for download, and only available on the server view via browser. I can't remember when or if I tested IMAP access.
Just now I sent a test, and on my two Macs it is presented as Read on both.
Gmail is neither pure IMAP nor pure POP, and it can be weird.
Ernie
Message was edited by: Ernie Stamper

Regarding error message from a transaction

Hello all,
      I have a scenario where i need to collect all the error message from a trasaction and display it in a pop up.
      i am calling a function module and inturn calling transaction 'FB08' using bdc. i may get one or more error message. if there are more than one messages from my function module then i need to display this messages in a popup.
    Currently i am displaying one message using 'message ID' syntax at the bottom. what should i do to display error messages in a popup if there are more message
Thanks,
Raju N.

use following fm.
CALL FUNCTION 'COPO_POPUP_TO_DISPLAY_TEXTLIST'
      EXPORTING
      TASK             = 'DISPLAY'
        titel            = 'Creation Log'
    IMPORTING
      FUNCTION         =
      TABLES
        text_table       = i_documents_log.

Dynamically display messages in JTextArea

Hello everyone! I have a problem with my code so i hope someone can help me out. I am not very advanced to Java but i have to create a chat program. My problem is that i dont know how to display messages from different users into my JTextArea. I haven`t connected my program to a server yet because i am still working on the interface.
So how can i display dynamically messages so that it looks like an interactive chat window. Here is my code.
Please bear in mind that i will use only a username not a password.
Thanks
import java.awt.*;
import javax.swing.*;
import java.awt.event.*;
import javax.swing.JFrame;
import javax.swing.JTextArea;
import javax.swing.JTextField;
import javax.swing.JScrollPane;
public class Jchat extends JApplet implements ActionListener
     JLabel label1 = new JLabel ("Welcome to ... CHAT");
     JTextField write = new JTextField(30);
     JTextArea output = new JTextArea(10,35);
     JButton button1 = new JButton("Send");
     JButton button2 = new JButton("Clear");
     Container con = getContentPane();
     Font headline = new Font("Georgia", Font.ITALIC, 18);
     JScrollPane scroll = new JScrollPane(con,ScrollPaneConstants.VERTICAL_SCROLLBAR_ALWAYS,ScrollPaneConstants.HORIZONTAL_SCROLLBAR_ALWAYS);
     JScrollPane scrollOutput = new JScrollPane(output);
     public void init()
          con.setPreferredSize(new Dimension(700,400));
          label1.setFont(headline);
          con.setBackground(Color.gray);
          con.setLayout(new BorderLayout());
          con.add(label1,BorderLayout.NORTH);
          con.add(output,BorderLayout.CENTER);
          con.add(write,BorderLayout.SOUTH);
          con.setLayout(new FlowLayout());
          con.add(button1,BorderLayout.EAST);
          con.add(button2);
          button1.addActionListener(this);
          button2.addActionListener(this);
          write.addActionListener(this);
          write.requestFocus();
          //cannot change text in the text area screen
          output.setEditable(false);
          output.setLineWrap(true);
          //scrollOutput.setVerticalScrollBarPolicy(38);
          setContentPane(scroll);
     public void actionPerformed (ActionEvent e)
          Object source = e.getSource();
          if (source == button2)
               write.setText(" ");
          else if (source == button1 || source == write)
               String input = write.getText();
               con.add(output,BorderLayout.CENTER);
               output.setText("User says: " + input + '\n');
               validate();
}and the other one
<html>
     <head>
          <title> </title>
     </head>
     <body>
          <APPLET
               CODE="Jchat.class"
               WIDTH=500
               HEIGHT=300>
          </APPLET>
     </body>
</html>

the border layout declaration has nothing to do with my question.Maybe not, but at least it would should that you took the time to read the suggestion.
And what you advised me to use TextArea.append(...); is not very specific.Well, neither was your question, so I gave the best suggestion I could. If it wasn't helpfull, then I would assume you would post a followup question to clear up the confusion.
setText(...) replaces all the text in the text area.
append(...) adds the text to the bottom of the text area.
If you didn't understand how/why to use the append(...) method why would you create a new posting? Would you not post a followup question in the original posting? Are we supposed to be mind readers and guess that you can't read the API to determine how a method should be used?
Of couse maybe I don't understand what you mean by "interactive chat", in which case reposting a question with the same wording won't help get the problem solved either.

Display message from exit function on web

Similar Messages

Maybe you are looking for