Display MIGO using BDC

Hi Experts,
While using BDC method to call MIGO, I am not getting desired output.
Find below the code snippet.
          clear bdcdata_wa.
          bdcdata_wa-fnam = 'BDC_CURSOR'.
          bdcdata_wa-fval = 'GODYNPRO-ACTION'.
          append bdcdata_wa to bdcdata_tab.
          clear bdcdata_wa.
          bdcdata_wa-fnam = 'GODYNPRO-ACTION'.
          bdcdata_wa-fval = 'A01'.
          append bdcdata_wa to bdcdata_tab.
          clear bdcdata_wa.
          bdcdata_wa-fnam = 'BDC_CURSOR'.
          bdcdata_wa-fval = 'GODYNPRO-REFDOC'.
          append bdcdata_wa to bdcdata_tab.
          clear bdcdata_wa.
          bdcdata_wa-fnam = 'GODYNPRO-REFDOC'.
          bdcdata_wa-fval = 'R01'.
          append bdcdata_wa to bdcdata_tab.
call transaction 'MIGO' using bdcdata_tab options from opt .
I am getting MIGO screen but Reference document type is not getting displayed properly.
Regards,
Sibinraj

Hi
Try below code and change accordingly
perform bdc_dynpro      using 'SAPLMIGO' '0001'.
perform bdc_field       using 'BDC_OKCODE'
                              '=OK_GO'.
perform bdc_field       using 'GODYNPRO-ACTION'
                              'A01'.
perform bdc_field       using 'GODYNPRO-REFDOC'
                              'R01'.
perform bdc_field       using 'GODEFAULT_TV-BWART'
                              '101'.
perform bdc_field       using 'BDC_CURSOR'
                              'GODYNPRO-PO_NUMBER'.
perform bdc_field       using 'GOHEAD-BLDAT'
                              '20.09.2011'.
perform bdc_field       using 'GOHEAD-BUDAT'
                              '20.09.2011'.
perform bdc_field       using 'GOHEAD-WEVER'
                              '1'.
perform bdc_dynpro      using 'SAPLMIGO' '0001'.
perform bdc_transaction using 'MIGO'.
Shiva

Similar Messages

How to display the output screen when I use bdc.

hey expert,
I want to display the output screen when i use bdc without using mode 'A'.
thank you.

Hi,
You can go for mode 'E'.. it will display the output screen directly and if there is any error in the transaction you would get that particular screen and you can correct and continue after which you will get the final screen if anything goes fine...
check this sample code....
I had a program if you execute below program it automatically creates a new zprogram.
REPORT zprogram_create_recording.
PARAMETER:
p_prog    TYPE sy-repid OBLIGATORY,
p_shtxt TYPE repti OBLIGATORY,
p_pack TYPE devclass DEFAULT '$tmp'.
DATA:
t_bdcdata LIKE
   STANDARD TABLE
         OF bdcdata.
DATA:
wa_bdcdata LIKE LINE OF t_bdcdata.
REFRESH t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-program    = 'SAPLWBABAP'.
wa_bdcdata-dynpro     = '0100'.
wa_bdcdata-dynbegin   = 'X'.
wa_bdcdata-fnam       = 'RS38M-PROGRAMM'.
wa_bdcdata-fval       = p_prog.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam       = 'BDC_OKCODE'.
wa_bdcdata-fval       = 'NEW'.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-program    = 'SAPLSEDTATTR'.
wa_bdcdata-dynpro     = '0200'.
wa_bdcdata-dynbegin   = 'X'.
wa_bdcdata-fnam       = 'RS38M-REPTI'.
wa_bdcdata-fval       = p_shtxt.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam       = 'TRDIR-SUBC'.
wa_bdcdata-fval       = '1'.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam       = 'BDC_OKCODE'.
wa_bdcdata-fval       = 'CONT'.
APPEND wa_bdcdata TO t_bdcdata.
IF p_pack EQ '$TMP'.
*local object
CLEAR wa_bdcdata.
wa_bdcdata-program    = 'SAPLSTRD'.
wa_bdcdata-dynpro     = '0100'.
wa_bdcdata-dynbegin   = 'X'.
wa_bdcdata-fnam       = 'KO007-L_DEVCLASS'.
wa_bdcdata-fval       = ' '.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam       = 'BDC_OKCODE'.
wa_bdcdata-fval       = 'TEMP'.
APPEND wa_bdcdata TO t_bdcdata.
ELSE.
*package assignment with request
CLEAR wa_bdcdata.
wa_bdcdata-program    = 'SAPLSTRD'.
wa_bdcdata-dynpro     = '0100'.
wa_bdcdata-dynbegin   = 'X'.
wa_bdcdata-fnam       = 'KO007-L_DEVCLASS'.
wa_bdcdata-fval       = p_pack.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam       = 'BDC_OKCODE'.
wa_bdcdata-fval       = 'ADD'.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-program    = 'SAPLSTRD'.
wa_bdcdata-dynpro     = '0300'.
wa_bdcdata-dynbegin   = 'X'.
wa_bdcdata-fnam       = 'KO008-TRKORR'.
wa_bdcdata-fval       = ' '.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam       = 'KO008-AS4TEXT'.
wa_bdcdata-fval       = ' '.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam       = 'BDC_OKCODE'.
wa_bdcdata-fval       = 'LOCK'.
APPEND wa_bdcdata TO t_bdcdata.
ENDIF.                                 " IF P_PACK EQ '$TMP'
CALL TRANSACTION 'SE38' USING t_bdcdata MODE 'E'.
Hope this would help you..
Regards
Narin Nandivada

To display flatfile rec's under 1 Alternative BOM using BDc recording.

Hi,
I m trying to display flat file entire(i.e.. 4 rec's i m using) records vertically under one (Alternative BOM) for CS01-BOM using BDC recording method.
Now i m tried with the following code,i m getting as one (Alternative BOM) for one ff record,by replacing one by one.
But i want as vertically under one (Alternative BOM).
Can anyone help me to overcome this.
report ZBOM
no standard page heading line-size 255.
*include bdcrecx1.
DATA: BEGIN OF bdc OCCURS 0,
matnr(18),
werks(4),
stlan(1),
END OF BDC.
DATA: BEGIN OF BDC1 OCCURS 0,
idnrk(18),
MENGE(18),
MEINS(3),
postp(1),
posnr(4),
END OF bdc1.
DATA: BEGIN OF BDCDATA OCCURS 0,
matnr(18),
werks(4),
stlan(1),
idnrk(18),
MENGE(18),
MEINS(3),
postp(1),
posnr(4),
END OF BDCDATA.
data ibdcdata type standard table of bdcdata WITH header line.
*start-of-selection.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = 'C:\Documents and Settings\dilipkumar.b\Desktop\soft.txt'
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = ','
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
VIRUS_SCAN_PROFILE =
NO_AUTH_CHECK = ' '
IMPORTING
FILELENGTH =
HEADER =
TABLES
DATA_TAB = BDCDATA
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*perform open_group.
loop at bdcdata.
perform bdc_dynpro using 'SAPLCSDI' '0100'.
perform bdc_field using 'BDC_CURSOR'
'RC29N-STLAN'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RC29N-MATNR'
'SOFTDRINKS'.
perform bdc_field using 'RC29N-WERKS'
'WIND'.
perform bdc_field using 'RC29N-STLAN'
'1'.
perform bdc_field using 'RC29N-DATUV'
'16.09.2008'.
perform bdc_dynpro using 'SAPLCSDI' '0110'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RC29K-BMENG'
'1'.
perform bdc_field using 'RC29K-STLST'
'1'.
perform bdc_field using 'BDC_CURSOR'
'RC29K-EXSTL'.
perform bdc_dynpro using 'SAPLCSDI' '0111'.
perform bdc_field using 'BDC_CURSOR'
'RC29K-LABOR'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_dynpro using 'SAPLCSDI' '0140'.
perform bdc_field using 'BDC_CURSOR'
'RC29P-POSTP(01)'.
perform bdc_field using 'BDC_OKCODE'
'=FCBU'.
perform bdc_field using 'RC29P-IDNRK(001)'
BDCDATA-IDNRK.
perform bdc_field using 'RC29P-MENGE(001)'
BDCDATA-MENGE.
perform bdc_field using 'RC29P-MEINS(001)'
BDCDATA-MEINS.
perform bdc_field using 'RC29P-POSTP(001)'
BDCDATA-POSTP.
perform bdc_dynpro using 'SAPLCSDI' '0130'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'BDC_CURSOR'
'RC29P-POSNR'.
perform bdc_field using 'RC29P-POSNR'
BDCDATA-POSNR. "'0010'.
perform bdc_field using 'RC29P-IDNRK'
BDCDATA-IDNRK. "'15'.
perform bdc_field using 'RC29P-MENGE'
BDCDATA-MENGE. "'1'.
perform bdc_field using 'RC29P-MEINS'
BDCDATA-MEINS. "'ml'.
perform bdc_dynpro using 'SAPLCSDI' '0131'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'BDC_CURSOR'
'RC29P-POTX1'.
perform bdc_field using 'RC29P-SANKA'
'X'.
*perform bdc_transaction using 'CS01'.
*perform close_group.
CALL TRANSACTION 'CS01' USING IBDCDATA MODE 'A' UPDATE 'S'.
REFRESH IBDCDATA.
clear ibdcdata.
endloop.
Start new screen *
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR iBDCDATA.
iBDCDATA-PROGRAM = PROGRAM.
iBDCDATA-DYNPRO = DYNPRO.
iBDCDATA-DYNBEGIN = 'X'.
APPEND ibDCDATA .
ENDFORM.
Insert field *
FORM BDC_FIELD USING FNAM FVAL.
IF FVAL NODATA.
CLEAR iBDCDATA.
iBDCDATA-FNAM = FNAM.
iBDCDATA-FVAL = FVAL.
APPEND iBDCDATA .
ENDIF.
ENDFORM.

Hi Dilip,
Please change your code.
I request you to please go through BDC tutorials before even starting to write the program.
There are many online tutorials which can help you with.
Also, search in SDN.. there you will get more than thousand results.. with the search term BDC.
Take this suggestion seriously before nayone reports the moderators that u have been posting this thread daily without taking into consideration the previous replies.
Regards,
Vishwa.

I want in LSMW SAME CODING. THIS IS USING BDC CALL TRANSACTION

REPORT ZXX_BDC_PRA NO STANDARD PAGE HEADING LINE-COUNT 20
                                            LINE-SIZE 150 .
Program Name :ZXX_BDC_PRA                             *
Object Id     :                                        *
Develper Name : praveen                                *
Start Date    : 25.06.07                               *
Description   : uploading flat file to sap system      *
*--structure for Data Uploading.
DATA: BEGIN OF IT_STR ,
        VKORG LIKE RF02D-VKORG,
        VTWEG LIKE RF02D-VTWEG,
        SPART LIKE RF02D-SPART,
        KTOKD LIKE RF02D-KTOKD,
        NAME1 LIKE KNA1-NAME1,
        SORTL LIKE KNA1-SORTL,
        ORT01 LIKE KNA1-ORT01,
        PSTLZ     LIKE KNA1-PSTLZ,
        LAND1 LIKE KNA1-LAND1,
        SPRAS LIKE KNA1-SPRAS,
        END OF IT_STR.
*--Internal Table for Data Uploading.
DATA: ITAB LIKE IT_STR OCCURS 0.
*--Internal Table to sucessfull Records.
DATA:   ITAB1 LIKE IT_STR OCCURS 0.
*--Internal Table to Store Error Records.
DATA:    ITAB2 LIKE STANDARD TABLE OF IT_STR WITH HEADER LINE.
*--Internal Table for Storing the BDC data.
DATA: BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
*--Internal Table for storing the messages.
DATA:   MESSTAB LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
DATA:   COUNT TYPE I VALUE 1,
        S VALUE 0, E VALUE 0.
Selection screen *
SELECTION-SCREEN BEGIN OF BLOCK b1
                 WITH FRAME TITLE TEXT-001.
PARAMETERS: P_FILE TYPE IBIPPARMS-PATH.
SELECTION-SCREEN END OF BLOCK B1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
*functionality to use drill down list
CALL FUNCTION 'F4_FILENAME'
    EXPORTING
      PROGRAM_NAME = SYST-CPROG
      DYNPRO_NUMBER = SYST-DYNNR
    IMPORTING
      FILE_NAME     = P_FILE.
Start-of-selection *
START-OF-SELECTION.
DATA FILENAME TYPE STRING.
FILENAME = P_FILE.
*-- Form to upload flatfile data into the internal table.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      FILENAME                = FILENAME
      FILETYPE                = 'ASC'
      HAS_FIELD_SEPARATOR     = 'X'
    TABLES
      DATA_TAB                = ITAB
    EXCEPTIONS
      FILE_OPEN_ERROR         = 1
      FILE_READ_ERROR         = 2
      NO_BATCH                = 3
      GUI_REFUSE_FILETRANSFER = 4
      INVALID_TYPE            = 5
      NO_AUTHORITY            = 6
      UNKNOWN_ERROR           = 7
      BAD_DATA_FORMAT         = 8
      HEADER_NOT_ALLOWED      = 9
      SEPARATOR_NOT_ALLOWED   = 10
      HEADER_TOO_LONG         = 11
      UNKNOWN_DP_ERROR        = 12
      ACCESS_DENIED           = 13
      DP_OUT_OF_MEMORY        = 14
      DISK_FULL               = 15
      DP_TIMEOUT              = 16
      OTHERS                  = 17.
*--Generating the BDC table for the fields of the internal table.
LOOP AT ITAB INTO IT_STR.
    PERFORM BDC_DYNPRO      USING 'SAPMF02D' '0107'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'RF02D-KTOKD'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM BDC_FIELD       USING 'RF02D-VKORG'
                                  IT_STR-VKORG.
    PERFORM BDC_FIELD       USING 'RF02D-VTWEG'
                                   IT_STR-VTWEG.
    PERFORM BDC_FIELD       USING 'RF02D-SPART'
                                  IT_STR-SPART.
    PERFORM BDC_FIELD       USING 'RF02D-KTOKD'
                                    IT_STR-KTOKD.
    PERFORM BDC_DYNPRO      USING 'SAPMF02D' '0110'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'KNA1-SPRAS'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM BDC_FIELD       USING 'KNA1-NAME1'
                                IT_STR-NAME1.
    PERFORM BDC_FIELD       USING 'KNA1-SORTL'
                                    IT_STR-SORTL.
    PERFORM BDC_FIELD       USING 'KNA1-ORT01'
                                    IT_STR-ORT01.
    PERFORM BDC_FIELD       USING 'KNA1-PSTLZ'
                                  IT_STR-PSTLZ.
    PERFORM BDC_FIELD       USING 'KNA1-LAND1'
                                  IT_STR-LAND1.
    PERFORM BDC_FIELD       USING 'KNA1-SPRAS'
                                    IT_STR-SPRAS.
    PERFORM BDC_DYNPRO      USING 'SAPMF02D' '0120'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'KNA1-TXJCD'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM BDC_DYNPRO      USING 'SAPMF02D' '0125'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'KNA1-NIELS'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM BDC_DYNPRO      USING 'SAPMF02D' '0360'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'KNVK-NAMEV(01)'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '=ENTR'.
    PERFORM BDC_DYNPRO      USING 'SAPMF02D' '0310'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'KNVV-BEGRU'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM BDC_DYNPRO      USING 'SAPMF02D' '0324'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'KNVP-PARVW(01)'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '=ENTR'.
*--Calling the transaction 'Vd01'.
    CALL TRANSACTION 'VD01' USING BDCDATA MODE 'N' UPDATE 'S'
    MESSAGES INTO MESSTAB.
    PERFORM MESSAGES.
    REFRESH : BDCDATA, MESSTAB.
ENDLOOP.
END-OF-SELECTION.
*--Populating the Success records internal table.
IF ITAB1[] IS NOT INITIAL.
format color 5.
    WRITE: /'SUCCESSFUL RECORDS'.
    format color off.
    LOOP AT ITAB1 INTO IT_STR.
      WRITE:/ IT_STR-VKORG,IT_STR-VTWEG,
              IT_STR-SPART,IT_STR-KTOKD,
              IT_STR-NAME1,IT_STR-SORTL,
              IT_STR-ORT01,
              IT_STR-PSTLZ,
              IT_STR-LAND1,
              IT_STR-SPRAS.
      S = S + 1.
    ENDLOOP.
REFRESH : ITAB1.
    WRITE:/ 'TOTAL RECORDS',S.
ENDIF.
*--Populating the error records internal table.
IF ITAB2[] IS NOT INITIAL.
FORMAT COLOR 3.
    WRITE :/ 'ERRORS RECORDS ARE'.
FORMAT COLOR OFF.
    LOOP AT ITAB2.
      WRITE:/ ITAB2-VKORG,
              ITAB2-VTWEG,
              ITAB2-SPART,ITAB2-KTOKD,
              ITAB2-NAME1,ITAB2-SORTL,
              ITAB2-ORT01,
              ITAB2-PSTLZ,
              ITAB2-LAND1,
              ITAB2-SPRAS.
        E = E + 1.
    ENDLOOP.
REFRESH : ITAB2.
    WRITE: / 'TOTAL RECORDS',E.
REFRESH : ITAB2.
ENDIF.
End of Selection *
END-OF-SELECTION.
TOP-OF-PAGE *
TOP-OF-PAGE.
WRITE:/ SY-ULINE.
WRITE:/10 'REPORT ID',21 SY-REPID,35 'USERNAME',46 SY-UNAME,
60 'SYSTEM DATE',70 SY-DATUM,80 'SYSTEM TIME',90 SY-UZEIT,
100 'PAGE NO',108 SY-PAGNO.
WRITE:/ SY-ULINE.
FOrm to Populate the BDC table.
       Start new screen                                              *
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR BDCDATA.
BDCDATA-PROGRAM = PROGRAM.
BDCDATA-DYNPRO   = DYNPRO.
BDCDATA-DYNBEGIN = 'X'.
APPEND BDCDATA.
ENDFORM.                    "BDC_DYNPRO
       Insert field                                                  *
FORM BDC_FIELD USING FNAM FVAL.
IF FVAL <> SPACE.
    CLEAR BDCDATA.
    BDCDATA-FNAM = FNAM.
    BDCDATA-FVAL = FVAL.
    APPEND BDCDATA.
ENDIF.
ENDFORM.                    "BDC_FIELD
*&      Form messages
FORM MESSAGES .
LOOP AT MESSTAB.
    IF MESSTAB-MSGTYP = 'I'.
     WRITE : / MESSTAB-MSGV1.
    ELSEIF
MESSTAB-MSGTYP = 'S'.
      INSERT LINES OF ITAB FROM COUNT TO COUNT INTO TABLE ITAB1 .
      COUNT = COUNT + 1.
     WRITE : / MESSTAB-MSGV1.
    ELSEIF
    MESSTAB-MSGTYP = 'E'.
      INSERT LINES OF ITAB FROM COUNT TO COUNT INTO TABLE ITAB2.
      COUNT = COUNT + 1.
     WRITE : / MESSTAB-MSGV1.
    ENDIF.
ENDLOOP.
ENDFORM.                    " messages

Hi
Go through the doc and do the same using LSMW
BDC is the way to transfer data by writing a batch input program which can use either session or call transaction method.
LSMW used to transfer data without/less code.
What type of data we transfer using LSMW?
LSMW is best suited for transferring master data.
Actually BDC and LSMW are not comparable at all.
for example LSMW itself can use BDC as a way of mass data transfer.
BDC is a mass data transfer technique via screen logic of existing SAP Data entry transactions. It behaves as if you are manually making thousand of entires into sap system as a background job. And that is probably the reason why BAPI's are preffered over BDC's.
On the other hand LSMW is a tool to facilitate DATA migration from other legacy systems ... It contains step by step procedure for data migration.
Like Managing Data Migration Projects , Creating Source Structures , Mapping Source structures wid Target structures , etc etc
LSMW internally might well be using the following techniqes for data transfer..
1. IDOX
2. Direct Input / BDC
4. BAPI's
LSMW is an encapsulated data transfer tool. It can provide the same functionality as BDC infact much more but when coming to techinical perspective most the parameters are encapulated. To listout some of the differences :
LSMW is basicaly designed for a fuctional consultant who do not do much coding but need to explore the fuctionality while BDC is designed for a technical consultant.
LSMW offers different techinque for migrating data: Direct input ,BAPI,Idoc,Batch input recording. While bdc basically uses recording.
LSMW mapping is done by SAP while in BDC we have to do it explicitly .
LSMW is basically for standard SAP application while bdc basically for customized application.
Coding can be done flexibly in BDC when compared to LSMW
1. Maintain Attributes:
Here you have to choose the second option and you can do the recording how this should work. Then assign the same to the Batch Input Recording name.
2. Maintain Source structure:
Create a structure name
3. Maintain Source field:
In this you have to create a structure same as that of the input file
eg: name
age
4. Maintain structure relations:
This will link the structure to the input file.
5. Maintain field mapping and conversion rules:
Here is the place where you can do coding, depending upon the code you have written or assignment you have done the values will get picked up from the file and get processed.
6. Maintain field mapping and conversion rules:
If you have any fixed values you can define here.
7. Specify files:
Specify the input file path and type.
8. Assign files:
This will assign ur file to the Input file
9. Read Data:
This will read ur data from teh file.
10. Dispaly Read Data:
You can see the uploaded data
11. Convert Data
This will convert the data to the corresponding format for processing
12. Display Converted data:
13. Create batch input session
Here this will create a batch input session for processing
14. Run Batch Input session:
By clicking on the session and process the same you can do teh needfu.
http://www.sapbrain.com/TOOLS/LSMW/SAP_LSMW_steps_introduction.html
http://esnips.com/doc/8e732760-5548-44cc-a0bb-5982c9424f17/lsmw_sp.ppt
http://esnips.com/doc/f55fef40-fb82-4e89-9000-88316699c323/Data-Transfer-Using-LSMW.zip
http://esnips.com/doc/1cd73c19-4263-42a4-9d6f-ac5487b0ebcb/LSMW-with-Idocs.ppt
http://esnips.com/doc/ef04c89f-f3a2-473c-beee-6db5bb3dbb0e/LSMW-with-BAPI.ppt
http://esnips.com/doc/7582d072-6663-4388-803b-4b2b94d7f85e/LSMW.pdf
for Long texts Upload
Please take a look at this..
http://help.sap.com/saphelp_erp2005/helpdata/en/e1/c6d30210e6cf4eac7b054a73f8fb1d/frameset.htm
Reward points for useful Answers
Regards
Anji

Call transaction using bdc tab and also skip first screen??

Hi,
Please help.
I want to call transaction PA30 fill it with values which are determined only at runtime and then skip first screen.
The screen doesn't have parameter fields so i cannot use 'set parameter id'.
I also cannot create a transaction with parameters as I only have these at runtime.
Anyone done anything like this???

hi,
you might be populateing the itab bdc_tab with the corresponding values fronm the recording.
while doing the recording go until to the screen wher u want to finsih.
and populate the bdc_tab wit the ok code,screen number and the value.
this will do.
for eg see the code below.
METHOD analyze_log.
DATA : wrk_extid TYPE balhdr-extnumber.
DATA : wrk_date(10) TYPE c.
DATA : it_rspar TYPE TABLE OF rsparams .
DATA : wa_rspar TYPE rsparams.
DATA: it_bdcdata TYPE STANDARD TABLE OF bdcdata,
      wa_bdcdata TYPE bdcdata.
DATA: params TYPE ctu_params.
CONSTANTS : object TYPE balhdr-object VALUE 'ZKIV_LOG'.
IF wa_kopf-vertr_nr IS NOT INITIAL.
    CONCATENATE wa_kopf-vertr_nr '/' wa_kopf-nachtr_nr INTO wrk_extid.
    wrk_date = '01.09.2006'.
    SET PARAMETER ID 'BALOBJ' FIELD object .
    SET PARAMETER ID 'BALEXT' FIELD wrk_extid.
    wa_rspar-selname = 'ALDATE'.
    wa_rspar-sign = 'I'.
    wa_rspar-kind = 'P'.
    wa_rspar-option = 'EQ'.
    wa_rspar-low = wrk_date.
    APPEND wa_rspar TO it_rspar.
ELSE.
    CLEAR wrk_extid.
    SET PARAMETER ID 'BALEXT' FIELD wrk_extid.
ENDIF.
Update BDC tab
--Call SLG1 using BDC--&
params-dismode = 'E'. "Show errors only
CLEAR wa_bdcdata.
wa_bdcdata-program = 'SAPLSLG3'.
wa_bdcdata-dynpro   = '0100'.
wa_bdcdata-dynbegin = 'X'.
APPEND wa_bdcdata TO it_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'BDC_CURSOR'.
wa_bdcdata-fval = 'BALHDR-ALDATE'.
APPEND wa_bdcdata TO it_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'BALHDR-ALDATE'.
wa_bdcdata-fval = wrk_date.
APPEND wa_bdcdata TO it_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'BDC_OKCODE'.
wa_bdcdata-fval = '=SELE'.
APPEND wa_bdcdata TO it_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-program = 'SAPLSLG3'.
wa_bdcdata-dynpro   = '0100'.
wa_bdcdata-dynbegin = 'X'.
APPEND wa_bdcdata TO it_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'BDC_OKCODE'.
wa_bdcdata-fval = '=&F03'.
APPEND wa_bdcdata TO it_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'BDC_SUBSCR'.
wa_bdcdata-fval = 'SAPLSBAL_DISPLAY                        0101SUBSCREEN'.
APPEND wa_bdcdata TO it_bdcdata.
CALL TRANSACTION 'SLG1' USING it_bdcdata OPTIONS FROM params.
--End of BDC--&
ENDMETHOD.
here wat i m doing is that i dont want the subscreen 101 to be displayed..
Message was edited by:
        Sandeep S

Change transaction using BDC-problem for large number of lines on screen

Hi All,
I am developing BAPI (using BDC) which creates quality notification in SAP which is entered via front end web application. Structure p_qmsm contain 3 lines of task in notification. The code is as given below. To avoid problem of large no of lines on screen,code lines starting with * is used. This actually for pagedown after entering every 2 lines and creates new line. so that 2 lines always push up on screen and there will not be problem for creating large no of lines on screen
perform bdc_dynpro using 'SAPLIQS0' '7200'.
perform bdc_field using 'BDC_OKCODE' '=10\TAB11'.
LOOP AT p_qmsm INTO wa_qmsm.
*IF wa_qmsm_cntr > 2.
       wa_qmsm_cntr = 2.
       perform bdc_dynpro using 'SAPLIQS0'                   '7204'.
       perform bdc_field   using 'BDC_OKCODE'                 '=PEND'.
ENDIF.
perform bdc_dynpro using 'SAPLIQS0' '7204'.
perform bdc_field using 'BDC_OKCODE' '/00'.
CONCATENATE 'VIQMSM-QSMNUM(' wa_qmsm_cntr ')' INTO wm_qmsm_qsmnum.
CONCATENATE 'VIQMSM-MNGRP(' wa_qmsm_cntr ')' INTO wm_qmsm_mngrp.
CONCATENATE 'VIQMSM-MNCOD(' wa_qmsm_cntr ')' INTO wm_qmsm_mncod.
CONCATENATE 'VIQMSM-MATXT(' wa_qmsm_cntr ')' INTO wm_qmsm_matxt.
perform bdc_field using wm_qmsm_qsmnum wa_qmsm-qsmnum.
perform bdc_field using wm_qmsm_mngrp wa_qmsm-mngrp.
perform bdc_field using wm_qmsm_mncod wa_qmsm-mncod.
perform bdc_field using wm_qmsm_matxt wa_qmsm-matxt.
wa_qmsm_cntr = wa_qmsm_cntr + 01.
ENDLOOP.
CALL TRANSACTION 'IQS2' USING wt_bdc
MODE 'N' UPDATE 'A' MESSAGES INTO P_MESSTAB.
The same code is used in modify mode also. web application is sending all 3 lines in modify mode even if single line is modified. It is already decided to send all rows back from web application to SAP in same sequence. It is working fine if i comment 5 lines which is starting with *. But in modify mode, how can i ensure that correct row is modified? and how can i achieve problem of large no of lines on screen?Please suggest?

Hi yogesh,
how can i ensure that correct row is modified?
1. For this we need to know two things ;
   a) the database table in which the entries are already stored
   b) the sequence in which they are displayed in the transaction.
2. So before changing any line, we need to compare (the primary key values / important values)
   a) as per the database table and as per the incoming data from web application (using bapi)
b) if the match is ok, it means that particular row was not modified, else modified.
how can i achieve problem of large no of lines on screen?
1. For this I am not sure about the transaction and its screen. Manytimes for appending row on the screen,
there is a PLUS + button on the grid toolbar. So for every entry, (inspite of some empty/filled rows already visible on the screen), we should use the + button, and this new row always appears on the top i.e. row number 1.
hope this helps.
regards,
amit m.

Inserting multiple payment transactions using BDC

Hi all,
Using BDC i displayed '5' payment transactions(xk01)
for banking details.
But i am not able to insert more than '5' payment transactions
i.e. if i entered 6th and 7th details means then 4th and 5th
payment transactions r overwritten.
So tell me how to display the all more than 5 details...

>
cranjith kumar wrote:
> Hi all,
> Using BDC i displayed '5' payment transactions(xk01)
> for banking details.
> But i am not able to insert more than '5' payment transactions
> i.e. if i entered 6th and 7th details means then 4th and 5th
> payment transactions r overwritten.
> So tell me how to display the all more than 5 details...
This is not a Web Dynpro ABAP related question. Please post to the correct forum.

Error while using BDC

Hi Experts,
     I have used the alv list report
for eg: the output is
vendor.no plant quantity
i had displayed quantity's sum at the end of the field(quantity),using do_sum = 'x'.
that total amount(wrbtr) should display in FB60(in amount field)
i had used bdc for this,but im getting the error as
FIELD INVFO-WRBTR. input value is longer than screen field
Can anyone suggest me on this issue.
Regards,
Sharmila.S

data:value type c.
loop at it_mseg1.
    move it_mseg1-lifnr to bdc-lifnr.
    move it_mseg1-werks to bdc-werks.
    move it_mseg1-diff to bdc-diff1.
    collect bdc.
    clear it_mseg1.
    endloop.
    value = bdc-diff1.*this is the value*
    CONDENSE value no-gaps.
loop at bdc.
perform bdc_dynpro      using 'SAPMF05A' '1100'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
*perform bdc_field       using 'INVFO-WRBTR'
                              value.*
*perform bdc_field       using 'INVFO-WRBTR'
                              value.*
*perform bdc_field       using 'INVFO-WRBTR'
                              value.*
*perform bdc_field       using 'INVFO-WRBTR'
                              value.*
*perform bdc_field       using 'INVFO-WRBTR'
                              value.*
*perform bdc_field       using 'INVFO-WRBTR'
                              value.*
CALL TRANSACTION 'FB60' USING BDCDATA MODE 'A' .
ENDLOOP.
ENDCASE.
ENDFORM.                    "USER_COMMAND
Edited by: Sharmila Somasundaram on Dec 30, 2009 6:31 PM
Edited by: Sharmila Somasundaram on Dec 30, 2009 6:52 PM

Wht r the advantages of using bdc rathan than lsmw?

Hi , I want to knwo.. wht r the advangtages of using bdc rathan than lsmw.,,,

Hi,
LSMW and BDC are vastly different.
BDC (Batch Data Communication) is a technology used for data transfer.
it is meant for transferring data thru SAP transactions itself. when u use BDC for data transfer,
the sequence of steps is the same as when u use standard sap transaction screens for data upload. the only difference is that u can use different options for foreground/background processing.
LSMW on the other hand is a tool that helps migrate data from a legacy system (non-sap system ) to SAP system.
it offers u various options to use either batch input, direct input, BAPIs or idocs.
it involves a series of some 17-18 steps to migrate data.
BDC:
Batch Data Communication (BDC) is the process of transferring data from one SAP System to another SAP system
or from a non-SAP system to SAP System.
Features :
BDC is an automatic procedure.
This method is used to transfer large amount of data that is available in electronic medium.
BDC can be used primarily when installing the SAP system and when transferring data from a legacy system (external system).
BDC uses normal transaction codes to transfer data.
Types of BDC :
CLASSICAL BATCH INPUT (Session Method)
CALL TRANSACTION
BATCH INPUT METHOD:
This method is also called as CLASSICAL METHOD.
Features:
Asynchronous processing.
Synchronous Processing in database update.
Transfer data for more than one transaction.
Batch input processing log will be generated.
During processing, no transaction is started until the previous transaction has been written to the database.
CALL TRANSACTION METHOD :
This is another method to transfer data from the legacy system.
Call transaction.
1) asynchronous processing
2) can transfer small amount of data
3) processing is faster.
4) errors need to be handled explicitly
5) data is updated automatically
Session method.
1) synchronous processing.
2) can tranfer large amount of data.
3) processing is slower.
4) error log is created
5) data is not updated until session is processed.
Session method is to populate the data by filling BDC structure
and keep as session to process from SM37 to post in appropriate Transaction.
Call transaction method is to post the data directly into the Transaction from an Executable program.
Features:
Synchronous processing. The system performs a database commit immediately before and after the CALL TRANSACTION USING statement.
Updating the database can be either synchronous or asynchronous. The program specifies the update type.
Transfer data for a single transaction.
Transfers data for a sequence of dialog screens.
No batch input processing log is generated.
For BDC:
http://myweb.dal.ca/hchinni/sap/bdc_home.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/bdc&
http://www.sap-img.com/abap/learning-bdc-programming.htm
http://www.sapdevelopment.co.uk/bdc/bdchome.htm
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://help.sap.com/saphelp_47x200/helpdata/en/69/c250684ba111d189750000e8322d00/frameset.htm
http://www.sapbrain.com/TUTORIALS/TECHNICAL/BDC_tutorial.html
LSMW:
The LSM Workbench is an R/3-based tool that supports You when transferring data from non-SAP systems ("Legacy Systems") to R/3 once or periodically.
The tool supports conversion of data of the legacy system in a convenient way. The data can then be imported into the R/3 system via batch input, direct input, BAPIs or IDocs.
Furthermore, the LSM Workbench provides a recording function that allows to generate a "data migration object" in an entry or change transaction.
The main advantages of the LSM Workbench:
Part of R/3 and thus independent of individual platforms
A variety of technical possibilities of data conversion:
Data consistency due to standard import techniques:
Batch input
Direct input
BAPIs (Business Application Programming Interfaces)
IDocs (Intermediate Documents)
The import technique to be used in an individual case depends on the business object.
Generation of the conversion program on the basis of defined rules
Clear interactive process guide
Interface for data in spreadsheet format
Creation of data migration objects on the basis of recorded transactions
Charge-free for SAP customers and SAP partners
http://help.sap.com/saphelp_nw04s/helpdata/en/87/f3ae74e68111d1b3ff006094b944c8/content.htm
http://www.sap-img.com/sap-data-migration.htm
http://www.scmexpertonline.com/downloads/SCM_LSMW_StepsOnWeb.doc
http://allsaplinks.com/lsmw.html
http://myweb.dal.ca/hchinni/sap/lsmw_home.htm
some more links
BDC
http://www.sap-img.com/bdc.htm
LSMW
http://www.sap-img.com/sap-data-migration.htm
http://www.sapgenie.com/saptech/lsmw.htm
http://sapabap.iespana.es/sapabap/manuales/pdf/lsmw.pdf
http://www.sap.info/public/INT/int/glossary/int/glossaryletter/Word-17643ed1d6d658821_glossary/L#Word-17643ed1d6d658821_glossary
Thanks.

How to record 'select' action in alv report using BDC technique

hi guys, u r the best;)
my question is: when u select one line in alv report, the line will be high-lighted, right? and suppose there's a button for further processing, then u can click the button to process only this line. ok now, using BDC technique, the system doesn't record the 'select' action! even i go to menu-->select all, it still doesn't work.
or if anybody knows how to release customer expected price except t-code v.25? cuz, i'm trying to record actions in v.25.
thx in advance, u helped me a lot.

Hi :
you cannot record ALV using BDC.According to ur req., after u enter data in selection screen, it goes to ALV list , there u select particular record and process further rite, say create in bck ground or foreground.
While doing recording, in selection screen if u have any check box which displays ALV List , uncheck it and continue ur recording.
In the bdc program u can see a field some thing like p_alvlist ' ', mark it as p_alvlist ' / '.
If not, copy the program along with includes, in ur program comment all the alv part, and call that particular FM where this selection takes place from ur main program.
Hope this helps.
Reward points if this is useful.
Thx.
Raghu

How to insert more than 12 items using BDC for MB1C

Hi,
When we use LSMW for data transfer of MB1C transaction, more than 12 items can be inserted in a document.
But using BDC only 12 and below is possible, if the flat file system has more that 12 item, then the document is not created.
How to insert more than 12 item in a document.
Regards

Hi Gow,
I have uploaded the MB1C through a BDC and it is working fine for n no of items.
Here is the code. May be this will be of your help.
*& Report ZMB1C
report ZMB1C
       no standard page heading line-size 255.
type-pools : slis.
tables : t100.
data: begin of record,
        MATNR(018),
        ERFMG(017),
        EXBWR(016),
      end of record.
data : itab like table of record with header line.
data : w_bdcdata type bdcdata.
data : t_bdcdata type standard table of bdcdata initial size 1.
data : messtab type standard table of bdcmsgcoll with header line.
data : mstring(300).
data : vf_index type i,
       no_lines type i,
       count type i value 0.
data : v_bldat(20),
       v_budat(20).
*Excel Sheet Data Upload Details
data : vf_start_col type i value '1',      "start column
       vf_start_row type i value '2',      "start row
       vf_end_col   type i value '100',    "maximum column
       vf_end_row   type i value '10000'. "maximum row
*/ Internal Table For Excel Data
data : it_excel type kcde_cells occurs 0 with header line.
*/ Field symbol
field-symbols : <fs>.
data : begin of it_messtab occurs 0,
       plant(10) type c,
       status(10) type c,
       message(90) type c,
       end of it_messtab.
*Data for ALV display
data : wa_fcat type slis_fieldcat_alv,
       colcnt type i.
data : it_fieldcat type slis_t_fieldcat_alv,
       i_events type slis_t_event.
data : l_title type sychar70.
data : l_repid like sy-repid.
* Selction Screen
selection-screen begin of block b1 with frame title text-000.
parameters : p_file like ibipparms-path obligatory,
             p_mode like ctu_params-dismode default 'A'.
selection-screen end of block b1.
selection-screen begin of block b2 with frame title text-001.
parameters : p_bldat like MKPF-BLDAT obligatory,
             p_budat like MKPF-BUDAT obligatory,
             p_bwart like RM07M-BWARTWA obligatory,
             p_werks like RM07M-WERKS obligatory,
             p_lgort like RM07M-LGORT obligatory.
selection-screen end of block b2.
* At Selction Screen
at selection-screen on value-request for p_file.
call function 'F4_FILENAME'
    EXPORTING
      program_name = syst-cprog
      dynpro_number = syst-dynnr
      field_name    = ''
    IMPORTING
      file_name     = p_file.
*Start of Selection Event
start-of-selection.
call function 'KCD_EXCEL_OLE_TO_INT_CONVERT'
    EXPORTING
      filename                = p_file
      i_begin_col             = vf_start_col
      i_begin_row             = vf_start_row
      i_end_col               = vf_end_col
      i_end_row               = vf_end_row
    TABLES
      intern                  = it_excel
    EXCEPTIONS
      inconsistent_parameters = 1
      upload_ole              = 2
      others                  = 3.
if sy-subrc <> 0.
* MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
*         WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
if it_excel[] is initial.
    MESSAGE I000(ZCL_TCSABAP).
else.
    sort it_excel by row col.
    loop at it_excel.
      move : it_excel-col to vf_index.
      assign component vf_index of structure itab to <fs>.
      move : it_excel-value to <fs>.
      at end of row.
        append itab.
        clear itab.
      endat.
    endloop.
endif.
if not itab[] is initial.
    DESCRIBE TABLE itab LINES no_lines.
    clear messtab.
    refresh messtab.
    CONCATENATE p_bldat+6(2) '.' p_bldat+4(2) '.' p_bldat(4) into v_bldat.
    CONCATENATE p_budat+6(2) '.' p_budat+4(2) '.' p_budat(4) into v_budat.
    perform map_rec.
    call transaction 'MB1C' using t_bdcdata mode p_mode update 'A'
    messages into messtab .
    clear t_bdcdata.
    refresh t_bdcdata.
    loop at messtab where msgtyp = 'E' or msgtyp = 'S' .
      select single * from t100 where sprsl = messtab-msgspra
                                and   arbgb = messtab-msgid
                                and   msgnr = messtab-msgnr.
      if sy-subrc = 0.
        mstring = t100-text.
        if mstring cs '&1'.
          replace '&1' with messtab-msgv1 into mstring.
          replace '&2' with messtab-msgv2 into mstring.
          replace '&3' with messtab-msgv3 into mstring.
          replace '&4' with messtab-msgv4 into mstring.
        else.
          replace '&' with messtab-msgv1 into mstring.
          replace '&' with messtab-msgv2 into mstring.
          replace '&' with messtab-msgv3 into mstring.
          replace '&' with messtab-msgv4 into mstring.
        endif.
        condense mstring.
        it_messtab-message = mstring(300).
        it_messtab-plant = p_werks.
        if messtab-msgtyp = 'E'.
          it_messtab-status = 'Error'.
        else.
          it_messtab-status = 'Success'.
        endif.
        append it_messtab.
        clear it_messtab.
      endif.
    endloop. "messtab
    if not it_messtab[] is initial.
      perform buildcatalog.
      perform display.
    endif.
endif.
*&      Form Map_Rec
*       text
form map_rec.
perform bdc_dynpro      using 'SAPMM07M' '0400'.
perform bdc_field       using 'BDC_CURSOR'
                                'RM07M-WVERS3'.
perform bdc_field       using 'BDC_OKCODE'
                                'NPE'.
perform bdc_field       using 'MKPF-BLDAT'
                                v_bldat.
perform bdc_field       using 'MKPF-BUDAT'
                                v_budat.
perform bdc_field       using 'RM07M-BWARTWA'
                                p_bwart.
perform bdc_field       using 'RM07M-WERKS'
                                p_werks.
perform bdc_field       using 'RM07M-LGORT'
                                p_lgort.
perform bdc_field       using 'XFULL'
perform bdc_field       using 'RM07M-XNAPR'
                                'X'.
perform bdc_field       using 'RM07M-WVERS2'
perform bdc_field       using 'RM07M-WVERS3'
                                'X'.
loop at itab.
    count = count + 1.
    perform bdc_dynpro      using 'SAPMM07M' '0410'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'MSEG-EXBWR'.
    if count <> no_lines.
      perform bdc_field       using 'BDC_OKCODE'
                                    '=NPE'.
    elseif count = no_lines.
      perform bdc_field       using 'BDC_OKCODE'
                                    '=BU'.
    endif.
    perform bdc_field       using 'MSEG-MATNR'
                                  itab-MATNR.
    perform bdc_field       using 'MSEG-ERFMG'
                                  itab-ERFMG.
    perform bdc_field       using 'MSEG-EXBWR'
                                  itab-EXBWR.
endloop. "itab
endform. "Map_Rec
**      Form BDC_DYNPRO
form bdc_dynpro using program dynpro.
clear w_bdcdata.
w_bdcdata-program = program.
w_bdcdata-dynpro   = dynpro.
w_bdcdata-dynbegin = 'X'.
append w_bdcdata to t_bdcdata.
endform.                    "bdc_dynpro
**      Form BDC_FIELD
form bdc_field using fnam fval.
if fval <> space.
    clear w_bdcdata.
    w_bdcdata-fnam = fnam.
    w_bdcdata-fval = fval.
    append w_bdcdata to t_bdcdata.
else.
    clear w_bdcdata.
    w_bdcdata-fnam = fnam.
    w_bdcdata-fval = fval.
    append w_bdcdata to t_bdcdata.
endif.
endform.                    "bdc_field
*       FORM buildcatalog                                             *
form buildcatalog.
clear wa_fcat.
clear it_fieldcat.
colcnt = colcnt + 1.
wa_fcat-col_pos      = colcnt.
wa_fcat-fieldname    = 'PLANT'.
wa_fcat-tabname      = it_messtab.
wa_fcat-seltext_l    = 'PLANT'.
wa_fcat-key          = 'X'.
wa_fcat-outputlen = '10'.
append wa_fcat to it_fieldcat.
clear wa_fcat.
colcnt = colcnt + 1.
wa_fcat-col_pos      = colcnt.
wa_fcat-fieldname    = 'STATUS'.
wa_fcat-tabname      = it_messtab.
wa_fcat-seltext_l    = 'STATUS'.
wa_fcat-outputlen = '10'.
append wa_fcat to it_fieldcat.
clear wa_fcat.
colcnt = colcnt + 1.
wa_fcat-col_pos      = colcnt.
wa_fcat-fieldname    = 'MESSAGE'.
wa_fcat-tabname      = it_messtab.
wa_fcat-seltext_l    = 'Message'.
wa_fcat-outputlen = '90'.
append wa_fcat to it_fieldcat.
endform.                    "buildcatalog
*       FORM display                                                  *
form display.
l_title = text-002.
l_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program = l_repid
      i_grid_title       = l_title
      it_fieldcat        = it_fieldcat
      it_events          = i_events[]
    TABLES
      t_outtab           = it_messtab
    EXCEPTIONS
      program_error      = 1
      others             = 2.
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform.                    "display
Regards,
Amit

How to upload chunks of Jpeg pictures in smartform using BDC.

helo expert,
Could you please tell me how can i upload pictures in sap tables using bdc or something else.
actually i would like to display pics as a field value dynamically in samrtforms while printing an invoice.
IS there any facility to upload JPEG type pics because i need clarity in pics while printing ?
Thanks........
Santosh.............

Use the standard process and BMP's uploaded into the graphics manager. BMP's work fine for photos and you can mass upload them directly using the code from SE78 via LSMW or a program (no BDC required) and then call them dynamically in your smartforms.

Identifying Programs using BDC.

Hi Experts,
I have a peculiar requirement. i have a list of programs. I have to develop a logic which will help me identify those programs using BDC (using batch input session or Call transaction). I also have to identify the transactions called using the batch input session or Call transaction.
For example:
1) I have a program using CALL TRANSACTION 'abc' USING BDCDATA
                     MODE   CTUMODE
                     UPDATE CUPDATE
                     MESSAGES INTO MESSTAB.
I have to extract the program name and 'abc' in a file.
kindly provide solutions.
Thanks
Edited by: Sadhna Achhra on Dec 22, 2008 7:58 AM

Hi Sadhna,
I just written a small program (with reference to standard progs) that u might use. please see if you can use the following codes and adapt it for your purpose:
logic:
- i have retrieved all includes associated to the program in selection screen
- scan each program where call transaction has been used
- get the transaction being called and display it on screen
PARAMETERS:p_prog TYPE trdir-name.
DATA: BEGIN OF i_int_abap OCCURS 0,    " Internal table for storing ABAP
        line(256) TYPE c,
      END OF i_int_abap.
DATA: BEGIN OF i_int_inc OCCURS 0,     " Table to Store Includes Name
        include LIKE sy-repid,
      END OF i_int_inc.
DATA:v_prog TYPE trdir-name ,
     v_tcode TYPE sy-tcode,
     v_dummmy TYPE c.
CONSTANTS:c_true      TYPE c VALUE 'X'.
CLEAR v_prog.
v_prog = p_prog.
CALL FUNCTION 'RS_GET_ALL_INCLUDES'   "This will get all includes related to the program
EXPORTING
    program             = v_prog
    with_inactive_incls = c_true
TABLES
    includetab          = i_int_inc
EXCEPTIONS
    not_existent        = 1
    no_program          = 2
    OTHERS              = 3.
IF sy-subrc = 0.
CLEAR i_int_inc.
i_int_inc-include = p_prog.
INSERT i_int_inc INDEX 1.
CLEAR i_int_inc.
LOOP AT i_int_inc.                 " loop at all programs/include and check for call transaction
    CLEAR v_prog.
    v_prog = i_int_inc-include.
    READ REPORT v_prog INTO i_int_abap.
    LOOP AT i_int_abap WHERE line(1) <> '*'
                          AND LINE CS 'CALL TRANSACTION '.
      SPLIT i_int_abap-line AT text-001 INTO v_dummmy v_tcode. "text-001 stores '
       SPLIT v_tcode AT text-001 INTO v_tcode v_dummmy. "text-001 stores '
      WRITE : / 'Call transaction to :' , v_tcode.
    ENDLOOP.
    REFRESH i_int_abap .
ENDLOOP.
ENDIF.
Regards,
Dev.

Reg Vendor master upload using BDC Call Transaction Method

Hi All,
Thanks in advance.
I am uploading vendor master data using bdc call transaction method for XK01. In that i am getting an error message that the fields " smtp_addr" ( for email) and "time_zone" (for time zone) doesnot exist on the screen '0110' ( this is the second screen) . the field timezone will be displayed on the screen only when we go for communications button and select the URL field .
Do anybody have the solution for this problem. if possible can you give me the code for that screen.

Create a recording via SM35 (menu go to=>recording), this will generate automatically the code for filling your bdcdata-table...

Error When I use BDC in my BSP Application

Hi,
I am creating a BSP application to create scheduling Aggrement, as BAPI is not suiting my req I am using BDC. This BDC is used with in a method of my application class. If I give all the data properly, I don't have any problem, it displays the output fine, but whenever some error occurs it immediatly terminates the BSP application, it does not give any option to handle the error.
Anyone can help me to solve this problem?
Regards,
Sathish

check these threads
Re: BDC in BSP
CNTR_ERROR While calling BDC from BSP
Regards
Raja

Display MIGO using BDC

Similar Messages

Maybe you are looking for