Display - minimum requirement is OS 10.64. Can I use with OS 10.60?
I want to buy the newest cinema display and use it with a Macbook Air.
I currently have a Macbook Air Rev C 1.86 GHz and 120GB HDD. I use OS 10.60 on it because I found I had a few problems when I upgraded to 10.63.
I want to buy a new Macbook Air (13 inch 256GB) in the next 7 days or so and use it with the new display I intend to buy. I am in Korea so I might not get the latest product as people in America do.
Questions:
1. Will I get the Lion OS with the new Macbook Air?
(I want to transfer all the stuff from my old Macbook Air as is without changing the operating system.)
2. Will the display operate with 10.60?
In the product specs it says 10.64 is the minimum. (I really do not want to upgrade as I am happy with 10.60.)
3. Will I get Lion discs with the display or with the new Macbook Air I buy? (I am in Korea.)
I just want to have Lion around in case I do want to upgrade to Lion in the future.
Will I get the Lion OS with the new Macbook Air?
No, unless you wait for its official release.
Will the display operate with 10.60?
It can be plugged in, but some features may not be available.
Will I get Lion discs with the display or with the new Macbook Air I buy?
No.
(54879)
Similar Messages
-
I recently upgrade to an iPAD Air. I gave my old iPAD (1st gen) to my wife. I restored it to original factory conditions. Now we cannot install iBook on it since it requires iOS 7. What can we do with older iPADS that are still 100% functional except for the fact that you cannot updrade the iOS above version 5?
Look at this similar problem in getting Netflix on an iPad 1. Same technique should work for you.
https://discussions.apple.com/thread/5753106?tstart=30
Cheers, Tom -
Apple care Model MD012LL/A can be used with MacBook Pro 15" Retina display model MC975TH/A (Model selling in Thailand)?
Why not?
-
HT5219 How many Thunderbolt displays can I use with my MacBook Pro using Windows 7 and Parrallels?
How many Thunderbolt displays can I use with my MacBook Pro using Windows 7 and Parallels
Two. You can daisy-chain two ATD together. Doesn't matter what you're running.
Clinton -
I have set up photoshop cs6 onto my new mac book pro retina display and it is so blurry i can't use it, is there an update i can use?
HiDPI and retina display support FAQ
-
What version of Quick books can I use with 10.6.8?
What version of Quick Books can I use with my IMac version 10.6.8?
Contact Intuit to find out. The current version requires Lion 10.7.3 or later. Or you could upgrade OS X:
Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard — Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
Snow Leopard General Requirements
1. Mac computer with an Intel processor
2. 1GB of memory
3. 5GB of available disk space
4. DVD drive for installation
5. Some features require a compatible Internet service provider;
fees may apply.
6. Some features require Apple’s iCloud services; fees and
terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service — this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
Lion System Requirements
1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
or Xeon processor
2. 2GB of memory
3. OS X v10.6.6 or later (v10.6.8 recommended)
4. 7GB of available space
5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mountain Lion — System Requirements
Macs that can be upgraded to OS X Mountain Lion
1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
Model Identifier 5,1 or later
3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
See App Compatibility Table — RoaringApps.
For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion. -
Whats types of inputs can be used with DAQ 6527? (PNP or NPN)
I need to know what types of input device (PNP or NPN) can be used with a DAQ 6527.
Greetings,
The digital inputs of the 6527 require TTL signals. As long as your device, whether it be a pnp or npn transistor, outputs a TTL signal, it will be compatible.
Regards,
Justin Britten
Applications Engineer
National Instruments -
itunes could not be connected to ipad because it is locked with a passcode, i must enter a passcode on the ipad before it can be used with itunes but all i see is "iPad is disabled connect to itunes" I have a passcode but nothing shows on the screen
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
What kind of range extender can I use with airport express
WHat kind of range extender can I use with an airport express?
WHat kind of range extender can I use with an airport express?
Use any router that you want if you will be connecting the extender/router back to the AirPort Express using a permanent, wired Ethernet cable connection.
If you are planning to use a wireless connection to extend the range of the network.....then another AirPort Express, AirPort Extreme or Time Capsule will be required. -
What version of firefox can I use with windows me?
What version of Firefox can I use with windows me? Where can I get it?
Firefox 3.0 versions and later do not work on the Windows 98/ME platform
*http://www.mozilla.com/en-US/firefox/system-requirements.html - Mozilla Firefox 3.6 System Requirements
Firefox 2.0.0.20 is the last release that runs on the Windows 98 and Windows ME platform.
* https://ftp.mozilla.org/pub/mozilla.org/firefox/releases/2.0.0.20/win32/en-US/ -
What photoshop can i use with mac vesion 10.6.8
What photoshop can i use with mac vesion 10.6.8
Photoshop CS6 should work, as for which is the oldest version that would work on that OS version you may want to do a Forum/web search.
System requirements | Photoshop -
IPAD is Disabled, tried to connect via itunes but get error "iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
I tried to backup my iphone to itunes and then got a message "Itunes has detetected an Iphone in recovery mode. you must restore tghis Iphone before it can be used with Itunes." Does this mean I've lost everything on my Iphone & have to restore to it's original settings?
Is the device actually in recovery mode? What is showing on the display?
If it's the "Connect to iTunes" screen, then the information is already lost.
If you've forced the device in DFU mode... reboot it and simply sync with the computer. -
How many iPads can I use with a licensed app?
How many iPads can I use with a licensed app?
If you're asking for a school, as I'm guessing from your aliast, here are the official terms of licensing for the App Store:
If you are a commercial enterprise or educational institution, you may download and sync an App Store Product for use by either (a) a single individual on one or more iOS Devices used by that individual that you own or control or (b) multiple individuals, on a single shared iOS Device you own or control. For example, a single employee may use an App Store Product on both the employee's iPhone and iPad, or multiple students may serially use an App Store Product on a single iPad located at a resource center or library. For the sake of clarity, each iOS Device used serially by multiple users requires a separate license.
So in summary, you can use an app on any iPad you use yourself. If you want to use the app on multiple iPads used by different users, you need a license for each iPad. Check out the Volume Purchase Program:
http://www.apple.com/education/volume-purchase-program/
Regards. -
i have an iphone 4s i signed out of my itunes on the devise and my friend signed herself into ituned but i signed her out an myself back in but my purchased songs and tones cannot download. it gives me a message of:this device is already associated with an apple id. this device can be used with another apple id in 82 days! is there anyway for me to fix this or override something. im freaking out!!
Sorry: once a device has been authorised for a particular iTunes account you can't change it to another until 90 days have passed. This is to prevent people cirumventing the restrictions of purchases to one account from consteantly swopping between accounts. You will have to wait for the 82 remaining days, and there is no workaround.
-
What does this message mean? "itunes has detected an iPad in recovery mode. You must restore this iPad before it can be used with ITnes." How do I restore when every time I connect to my computer I get this message?
Perhaps the information in this Apple support article will help:
http://support.apple.com/kb/TS3694#error3004
Regards.
Maybe you are looking for
-
Motion 3.01 Crashing and crashing...
I spend a lot of $$$ Buying Final Cut Studio 2. I spend a lot of $$$ Buying a new Macbook Pro. I cannot use Motion 3. Unless... I reinstall my OS X and my Final Cut Studio, because Apple says that Motion 3 is incompatible with Macbook Pro Software Up
-
How to change the search provider when using the Firefox Home Button Search feature?
In Firefox itself I have configured duckduckgo as my default search provider. But when I use the Firefox Home Button Search it is always set to google and I do not see any option to change that? I like the Firefox Home Button Search (or whatever it's
-
Imported photos go blank upon rendering complete
This is my first attempt at Imovie. I was able to sucessfully import and edit Hi8 video via a Canopus firewire unit. I am trying to add photos and other artwork to make titles, cast of characters and so on. Typically I use Photoshop to cut and paste
-
HDD formatting for OSX and Windows
How can I format a HDD so that it is readable and writable from under both windows and osx?
-
Hi! Could someone please tell me if ILife 08 will work on a G5 1.8 GHz imac. I upgraded the OS to 10.5 but my IDVD does not work anymore. So am planning to get ILife 08 but am not sure if it will work on my machine. I read somewhere that ILife 08 req